WebI - pdf creation failed with RWI 00236 Error

Hello Team,
One of our webI report is giving folllowing error when refreshed.
BOXI2: Failed to create PDF, Reason: The Web Intelligence server could not be reached. Contact your Business Objects administrator. (Error: RWI 00236) EX1:FatalException occured. The cause was : BusinessObjects.Enterprise.OcaFramework.Oca.oca_abuse: IDL:img.seagatesoftware.com/OCA/oca_abuse:3.2 at BusinessObjects.Enterprise.OcaFramework.ManagedService.invoke(MethodInfo method, Object[] args, IDictionary context)
This error only comes when a particular combination of values are entered through prompts. e.g. for rep A and date B the problem exists where as for rep A and date other than B, this error doesnt come.
During testing, this error did not appeared even for rep A and date B combination a couple of time. It has been more than a week I am doing analysis on this.
Please help me to find out the reason for fixing the issue. Please let me know if you need additional information.
Regards,
Sai

Hi,
I am not very sure why this happened as earlier said our issue was the similar like your we are not able to save report in the pdf. SO we investigated and found two reason.
1) in the particular column for specific value like " sbdneujdnd" (Space and value in the column) we were not able to save report in the pdf and wrap text is checked for this column.If we exclude this value from the report i am able to save report in the pdf.
2) we have unchecked the wrap text and with this value is in the column and we can save this report in the pdf.
We have raised this case with SAP Support.I will let you know once SAP get back to us.
Thanks,
Amit

Similar Messages

Repository Creation fails with Time Out Error

Hi
I am trying a test setup of OVM3.1.1-305. I am using OpenFiler for iSCSI disks and have created 20GB iSCSI disk for Pool FileSystem and another 260GB iSCSI disk for Data Repository. The server pool gets created fine with the Pool FS and HA and Cluster options enabled. But while exposing the iSCSI disk for data store the job times out. Details of the error message is as below, please help!
The Job has timed out while executing, and will be aborted.
Job Construction Phase
begin()
Appended operation 'File System Construct' to object '0004fb000009000001b30fa7bc24bef1 (Local FS ibcovs1)'.
Appended operation 'Cluster File System Present' to object 'fb5840a9a3a78f51'.
Appended operation 'Repository Construct' to object '0004fb00000300009bfb51738df3f282 (OPNFILER (2))'.
commit()
Completed Step: COMMIT
Objects and Operations
Object (IN_USE): [LocalFileServer] 0004fb000009000001b30fa7bc24bef1 (Local FS ibcovs1)
Operation: File System Construct
Object (CREATED): [Repository] 0004fb00000300009bfb51738df3f282 (OVSRepos)
Operation: Repository Construct
Object (IN_USE): [LocalFileServer] 0004fb0000090000a8d525219658c28a (Local FS ibcovs2)
Object (IN_USE): [Cluster] fb5840a9a3a78f51
Operation: Cluster File System Present
Object (CREATED): [LocalFileSystem] 0004fb00000500000cd1d94d87e829e8 (fs_OVSRepos)
Object (IN_USE): [StorageElement] 0004fb0000180000bf6e8d3ff957b21b (OPNFILER (2))
Job Running Phase at 04:01 on Mon, Dec 3, 2012
Job Participants: [44:45:4c:4c:48:00:10:44:80:52:b4:c0:4f:33:42:53 (ibcovs1), 44:45:4c:4c:48:00:10:46:80:32:c6:c0:4f:34:42:53 (ibcovs2)]
Actioner
Starting operation 'File System Construct' on object '0004fb00000500000cd1d94d87e829e8 (fs_OVSRepos)'
Job: 1354487506506, aborted post-commit by user: admin
Write Methods Invoked
Class=InternalJobDbImpl vessel_id=2477 method=addTransactionIdentifier accessLevel=6
Class=LocalFileServerDbImpl vessel_id=788 method=createFileSystem accessLevel=6
Class=LocalFileSystemDbImpl vessel_id=2486 method=setName accessLevel=6
Class=LocalFileSystemDbImpl vessel_id=2486 method=setFoundryContext accessLevel=6
Class=LocalFileSystemDbImpl vessel_id=2486 method=onPersistableCreate accessLevel=6
Class=LocalFileSystemDbImpl vessel_id=2486 method=setLifecycleState accessLevel=6
Class=LocalFileSystemDbImpl vessel_id=2486 method=setRollbackLifecycleState accessLevel=6
Class=LocalFileSystemDbImpl vessel_id=2486 method=setRefreshed accessLevel=6
Class=LocalFileSystemDbImpl vessel_id=2486 method=setBackingDevices accessLevel=6
Class=LocalFileSystemDbImpl vessel_id=2486 method=setUuid accessLevel=6
Class=LocalFileSystemDbImpl vessel_id=2486 method=setPath accessLevel=6
Class=LocalFileSystemDbImpl vessel_id=2486 method=setSimpleName accessLevel=6
Class=LocalFileSystemDbImpl vessel_id=2486 method=addFileServer accessLevel=6
Class=LocalFileSystemDbImpl vessel_id=2486 method=setStorageDevice accessLevel=6
Class=StorageElementDbImpl vessel_id=1121 method=addLayeredFileSystem accessLevel=6
Class=LocalFileSystemDbImpl vessel_id=2486 method=setSimpleName accessLevel=6
Class=LocalFileServerDbImpl vessel_id=922 method=addFileSystem accessLevel=6
Class=LocalFileSystemDbImpl vessel_id=2486 method=addFileServer accessLevel=6
Class=ClusterDbImpl vessel_id=1340 method=addLocalFileSystem accessLevel=6
Class=LocalFileSystemDbImpl vessel_id=2486 method=setCluster accessLevel=6
Class=LocalFileSystemDbImpl vessel_id=2486 method=setAsset accessLevel=6
Class=LocalFileSystemDbImpl vessel_id=2486 method=createRepository accessLevel=6
Class=RepositoryDbImpl vessel_id=2492 method=setName accessLevel=6
Class=RepositoryDbImpl vessel_id=2492 method=setFoundryContext accessLevel=6
Class=RepositoryDbImpl vessel_id=2492 method=onPersistableCreate accessLevel=6
Class=RepositoryDbImpl vessel_id=2492 method=setLifecycleState accessLevel=6
Class=RepositoryDbImpl vessel_id=2492 method=setRollbackLifecycleState accessLevel=6
Class=RepositoryDbImpl vessel_id=2492 method=setRefreshed accessLevel=6
Class=RepositoryDbImpl vessel_id=2492 method=setDom0Uuid accessLevel=6
Class=RepositoryDbImpl vessel_id=2492 method=setSharePath accessLevel=6
Class=RepositoryDbImpl vessel_id=2492 method=setSimpleName accessLevel=6
Class=RepositoryDbImpl vessel_id=2492 method=setFileSystem accessLevel=6
Class=LocalFileSystemDbImpl vessel_id=2486 method=addRepository accessLevel=6
Class=RepositoryDbImpl vessel_id=2492 method=setManagerUuid accessLevel=6
Class=RepositoryDbImpl vessel_id=2492 method=setVersion accessLevel=6
Class=RepositoryDbImpl vessel_id=2492 method=addJobOperation accessLevel=6
Class=RepositoryDbImpl vessel_id=2492 method=setSimpleName accessLevel=6
Class=RepositoryDbImpl vessel_id=2492 method=setDescription accessLevel=6
Class=InternalJobDbImpl vessel_id=2477 method=setCompletedStep accessLevel=6
Class=InternalJobDbImpl vessel_id=2477 method=setAssociatedHandles accessLevel=6
Job Internal Error (Operation)com.oracle.ovm.mgr.api.exception.FailedOperationException: OVMAPI_B000E Storage plugin command [storage_plugin_createFileSystem] failed for storage server [0004fb000009000001b30fa7bc24bef1] failed with [com.oracle.ovm.mgr.api.exception.FailedOperationException: OVMAPI_4010E Attempt to send command: dispatch to server: ibcovs1 failed. OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/2 storage_plugin_createFileSystem oracle.ocfs2.OCFS2.OCFS2Plugin 0004fb00000500000cd1d94d87e829e8 /dev/mapper/14f504e46494c4552637a6f5154372d7643426d2d49333763 0, Status: java.lang.InterruptedException
Mon Dec 03 04:03:48 IST 2012
Mon Dec 03 04:03:48 IST 2012] OVMAPI_4010E Attempt to send command: dispatch to server: ibcovs1 failed. OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/2 storage_plugin_createFileSystem oracle.ocfs2.OCFS2.OCFS2Plugin 0004fb00000500000cd1d94d87e829e8 /dev/mapper/14f504e46494c4552637a6f5154372d7643426d2d49333763 0, Status: java.lang.InterruptedException
Mon Dec 03 04:03:48 IST 2012
Mon Dec 03 04:03:48 IST 2012
Mon Dec 03 04:03:48 IST 2012
at com.oracle.ovm.mgr.action.StoragePluginAction.processException(StoragePluginAction.java:1371)
at com.oracle.ovm.mgr.action.StoragePluginAction.createFileSystem(StoragePluginAction.java:894)
at com.oracle.ovm.mgr.op.physical.storage.FileSystemConstruct.createFileSystem(FileSystemConstruct.java:57)
at com.oracle.ovm.mgr.op.physical.storage.FileSystemConstruct.action(FileSystemConstruct.java:49)
at com.oracle.ovm.mgr.api.collectable.ManagedObjectDbImpl.executeCurrentJobOperationAction(ManagedObjectDbImpl.java:1009)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:330)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:290)
at com.oracle.odof.core.storage.Transaction.invokeMethod(Transaction.java:822)
at com.oracle.odof.core.Exchange.invokeMethod(Exchange.java:245)
at com.oracle.ovm.mgr.api.physical.storage.LocalFileServerProxy.executeCurrentJobOperationAction(Unknown Source)
at com.oracle.ovm.mgr.api.job.JobEngine.operationActioner(JobEngine.java:218)
at com.oracle.ovm.mgr.api.job.JobEngine.objectActioner(JobEngine.java:309)
at com.oracle.ovm.mgr.api.job.InternalJobDbImpl.objectCommitter(InternalJobDbImpl.java:1140)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:330)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:290)
at com.oracle.odof.core.BasicWork.invokeMethod(BasicWork.java:136)
at com.oracle.odof.command.InvokeMethodCommand.process(InvokeMethodCommand.java:100)
at com.oracle.odof.core.BasicWork.processCommand(BasicWork.java:81)
at com.oracle.odof.core.TransactionManager.processCommand(TransactionManager.java:773)
at com.oracle.odof.core.WorkflowManager.processCommand(WorkflowManager.java:401)
at com.oracle.odof.core.WorkflowManager.processWork(WorkflowManager.java:459)
at com.oracle.odof.io.AbstractClient.run(AbstractClient.java:42)
at java.lang.Thread.run(Thread.java:662)
Caused by: com.oracle.ovm.mgr.api.exception.FailedOperationException: OVMAPI_4010E Attempt to send command: dispatch to server: ibcovs1 failed. OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/2 storage_plugin_createFileSystem oracle.ocfs2.OCFS2.OCFS2Plugin 0004fb00000500000cd1d94d87e829e8 /dev/mapper/14f504e46494c4552637a6f5154372d7643426d2d49333763 0, Status: java.lang.InterruptedException
Mon Dec 03 04:03:48 IST 2012
Mon Dec 03 04:03:48 IST 2012
at com.oracle.ovm.mgr.action.ActionEngine.sendCommandToServer(ActionEngine.java:507)
at com.oracle.ovm.mgr.action.ActionEngine.sendDispatchedServerCommand(ActionEngine.java:444)
at com.oracle.ovm.mgr.action.ActionEngine.sendServerCommand(ActionEngine.java:378)
at com.oracle.ovm.mgr.action.StoragePluginAction.createFileSystem(StoragePluginAction.java:890)
... 27 more
Caused by: com.oracle.ovm.mgr.api.exception.IllegalOperationException: OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/2 storage_plugin_createFileSystem oracle.ocfs2.OCFS2.OCFS2Plugin 0004fb00000500000cd1d94d87e829e8 /dev/mapper/14f504e46494c4552637a6f5154372d7643426d2d49333763 0, Status: java.lang.InterruptedException
Mon Dec 03 04:03:48 IST 2012
at com.oracle.ovm.mgr.action.ActionEngine.sendAction(ActionEngine.java:798)
at com.oracle.ovm.mgr.action.ActionEngine.sendCommandToServer(ActionEngine.java:503)
... 30 more
FailedOperationCleanup
Starting failed operation 'File System Construct' cleanup on object 'fs_OVSRepos'
Complete rollback operation 'File System Construct' completed with direction=fs_OVSRepos
Rollbacker
Executing rollback operation 'File System Construct' on object '0004fb00000500000cd1d94d87e829e8 (fs_OVSRepos)'
Complete rollback operation 'File System Construct' completed with direction=DONE
Objects To Be Rolled Back
Object (IN_USE): [LocalFileServer] 0004fb000009000001b30fa7bc24bef1 (Local FS ibcovs1)
Object (CREATED): [Repository] 0004fb00000300009bfb51738df3f282 (OVSRepos)
Object (IN_USE): [LocalFileServer] 0004fb0000090000a8d525219658c28a (Local FS ibcovs2)
Object (IN_USE): [Cluster] fb5840a9a3a78f51
Object (CREATED): [LocalFileSystem] 0004fb00000500000cd1d94d87e829e8 (fs_OVSRepos)
Object (IN_USE): [StorageElement] 0004fb0000180000bf6e8d3ff957b21b (OPNFILER (2))
Thanks & Regards

check your messages log and etc on the VM server. The job log doesn't go into enough detail to tell what's causing the issue. It did fail cleanup. Meaning.... that your ocfs2 filesystem is probably orphaned. You have have to clear the iSCSI LUN before trying again.

RWI 00236 error while opening report in PDF mode

Hi All,
I'm getting the RWI 00236 error while the report is opened in PDF mode.I have searched on this error but couldn't got the answer so far.My report is quite a large one and i wont get any error while running simple reps.If this is something to do with temp files deletion at server side ,pls let me know which temp files needs to be deleted bcoz there quite few temp files at server level.Ofter getting this error msg ,the report browser hangs up and i needs to logout completely from infoview.
Im using BO X1r2 version and service pack is SP4.

Hi,
Are you able to open other reports in PDF Mode or not
If you are not able to open any report in PDF format then try to follow below mentioned steps.
1. Open Adobe Acrobat Reader. Click Edit > Preferences.
2. Click Internet in the Categories column of the Preferences property sheet.
3. Choose Display PDF in browser check box as shown below.
4. Click Ok, Adobe will reconfigure the setting, close Reader.
5. Now, when we view in pdf format in IE, we might see one message
6. So, when IE is launched, go to Tools>Manage Add-ons>Enable or Disable Add-ons and then enable
"Adobe PDF Reader Link Helper" add-on. Click Ok, restart IE.
Cheers,
Suresh Aluri.

VMM 2012 R2 Template creation fails with sysprep error via the gui, but works in powershell?

I'm in the process of trying to convert an existing gen1 VM (Win Server 2012 R2) to a VM template using VMM 2012 R2 with rollup 1. The creation keeps failing with the following error :-
"Error
(2901)The operation did not complete successfully because of a parameter or call sequence
that is not valid.Recommended ActionEnsure
that the parameters are valid, and then try the operation again."
I've checked that the local administrator account for the machine being converted to a template and it is blank as expected and in an attempt to troubleshoot I've output the template creation script via the VMM GUI and executed the commands in order which appears
to have resolved the problem, well the template finishes creation, i'm yet to deploy a machine via it?
# Create VM Template Wizard Script
# Script generated on Thursday, April 3, 2014 12:52:15 PM by Virtual Machine Manager
# For additional help on cmdlet usage, type get-help <cmdlet name>
$VM = Get-SCVirtualMachine -VMMServer localhost -Name "MyTemplate_Template" -ID "98299447-83e1-4d98-a558-a96ebafcf9b5"
| where {$_.VMHost.Name -eq "myhost.mydomain.com"}
$LibraryServer = Get-SCLibraryServer -VMMServer localhost | where {$_.Name -eq "my.library.com"}
$GuestOSProfile = Get-SCGuestOSProfile -VMMServer localhost | where {$_.Name -eq "Windows Server 2012
R2"}
$OperatingSystem = Get-SCOperatingSystem -VMMServer localhost -ID "50b66974-c64a-4a06-b05a-7e6610c579a2"
| where {$_.Name -eq "Windows Server 2012 R2 Standard"}
$template = New-SCVMTemplate -Name "My Template" -RunAsynchronously -VM $VM -LibraryServer $LibraryServer
-SharePath "\\mylibrary.mydomain.com\SCVMM Library\Templates\mytemplatedestination" -GuestOSProfile $GuestOSProfile -JobGroup d2f2f539-85da-4091-ab08-abe739fc4761 -ComputerName "*" -TimeZone 85 -FullName "Administrator"
-OrganizationName "My Organisation" -Workgroup "WORKGROUP" -AnswerFile $null -OperatingSystem $OperatingSystem
Now the only fields that weren't populated when I ran through the gui were FullName and Organization? Before I changed the script these two fields were just set to ""? Is that what has potentially caused the issue are they both required fields?

Your not the only one who can reproduce this. Did you ever find out what it was? I saw your post and tried your same work-around and it also worked for me via Powershell.

Fusion Apps web service call fails with error access denied (oracle.wsm.security.WSFunctionPermission)

Hello Guru,
I am trying to call a supplier service from SOA/OSB.
But while calling the service it is failing with the below error message
access denied (oracle.wsm.security.WSFunctionPermission http://xmlns.oracle.com/apps/prc/poz/suppliers/supplierService/SupplierService#getSupplierVO invoke)
As per OER cookbook i have attached the "oracle/wss_username_token_client_policy" to the Fusion apps web service.
I am trying to pass security credentials to the service by using all the methods... through composite ..through bpel through wsse header but in all cases i am getting similar error.
Please let me know if some one has called the fusion apps web service to create a supplier of solution to my problem as mentioned above.

Hi Sai,
Thanks for the quick and correct response. Yes, after doing the research, I'm also came to same conclusion. But what stops me here is that where exactly I need to check for this permission.
I mean the theory what I built on this Authorization/Permission is that:
For the resource - WebService (SupplierService), there is an assigned application role for which the Entitlement/Permission is provided.
Pls. help me in the below items:
a. What is the application role(in role hierarchy) assigned to this resource(Webservice). Which page I need to check(navigation) this and the required credentials..
b. What is the Entitlement provided for this application role for this operation (getSupplierVO) invoke.. Which page I need to check(navigation) this and the required credentials..
Thanks in Advance.
Thanks & Regards
Madhu

FusionApps web service call fails with error access denied (oracle.wsm.security.WSFunctionPermission)

Hi Gurus,
I started test this webservice from EM (Test Web Service)
But while calling the service it is failing with the below error message
access denied (oracle.wsm.security.WSFunctionPermission http://xmlns.oracle.com/apps/prc/poz/suppliers/supplierService/SupplierService#getSupplierVO invoke)
As per OER cookbook i have attached the "oracle/wss_username_token_client_policy" to the Fusion apps web service.
I am trying to pass security credentials to the service by using all the methods... through composite ..through bpel through wsse header but in all cases i am getting similar error.
Please let me know if some one has called the fusion apps web service to create a supplier of solution to my problem as mentioned above.
Is it any policy error or the authorization error ...
Are there any navigation steps I can check the existed permission on this resource etc..,
Thanks in Advance

Hi Sai,
Thanks for the quick and correct response. Yes, after doing the research, I'm also came to same conclusion. But what stops me here is that where exactly I need to check for this permission.
I mean the theory what I built on this Authorization/Permission is that:
For the resource - WebService (SupplierService), there is an assigned application role for which the Entitlement/Permission is provided.
Pls. help me in the below items:
a. What is the application role(in role hierarchy) assigned to this resource(Webservice). Which page I need to check(navigation) this and the required credentials..
b. What is the Entitlement provided for this application role for this operation (getSupplierVO) invoke.. Which page I need to check(navigation) this and the required credentials..
Thanks in Advance.
Thanks & Regards
Madhu

Encrypting PDF with password. PDF command failed due to PDFlib error: Bad parameter.

I'm trying to encrypt a PDF with a password and receive this error.
~ERROR~com.adobe.document.PDFManipulation~: PDF command failed due to PDFlib error: Bad parameter.
It does not throw an exception, it just logs this error.
Anybody know how to fix this?
Version: 7.0.2
OS: Win

I was also getting this error, when trying to set usage rights on a document and then encrypt it with a password. I found a solution which works (more like a workaround, as this feels like a bug):
1. Open the unprotected file
2. Call pdfDocument.encryptWithPassword()
3. Call pdfDocument.save(), write resulting bytes to temp file
4. Reopen this file with pdfFactory.openPdfWithPassword()
5. Now you can call pdfDocument.setUsageRights() and pdfDocument.save()

Windows 2008 R2 backup fails with event 521 error code 2155348001

Windows Server 2008 R2 SP1. Hyper-V role installed.
OS on drive C. All VMs stored on Drive D.
I am attempting to run a Bare Metal backup of the host system to a network share.
Drive D is not included in the backup job. I am getting the following error:
Log Name:      Application
Source:        Microsoft-Windows-Backup
Date:          1/10/2014 11:28:52 PM
Event ID:      521
Task Category: None
Level:         Error
Keywords:
User:          SYSTEM
Computer:      SHAQTUS.scdl.local
Description:
The backup operation that started at '‎2014‎-‎01‎-‎11T04:08:50.683000000Z' has failed because the Volume Shadow Copy Service operation to create a shadow copy of the volumes being backed up failed with following error code '2155348001'. Please review the event
details for a solution, and then rerun the backup operation once the issue is resolved.
Reviewing event details, as suggested, does not offer any solution.
I have tried the suggested solutions in other similar threads of increasing the timeout value with the registry entry.
This does not work.
I have not tried reregistering the VSS writers manually, as the only links I have found are for server 2003/2008 (not R2) and explicitly state that they won’t work on higher versions of the OS, since they now utilize manifests and the manual procedure could
cause problems for those servers. Haven't found similar procedures for 2008 R2.
I have been able to narrow this down a bit.
A Windows 2008 R2 SP1 server with Hyper-V installed – backup to a network share is successful;
Install the DPM 2012 agent – same backup fails with the 2155348001 error.
We use DPM 2012 to backup VMs, but DPM cannot perform a bare metal backup/restore of server and the 2012 version no longer has the DPMSRT feature.
I prefer to run Bare Metal Backup to a file server share.
Stuck on this one.
Rick

Hi,
The issue is related to DPM, I would suggest you ask for help from DPM forums:
http://social.technet.microsoft.com/Forums/en-US/home?forum=dataprotectionmanager
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Windows 8 USB recovery fails with CTOERROR.flg error

Windows 8 recovery using HP supplied USB recovery device failed with CTOERROR.flg error.
[22:53:29.29] ChkErrBB.CMD : Detect some error during PININST_BBV.
[22:53:29.31] ChkErrBB.CMD : Check c:\system.sav\logs\BurnBootWarn.log
[22:53:29.31] ChkErrBB.CMD : or, check c:\system.sav\logs\BurnBootMerge.log
I have tried all the scenarios which are described in this forum but no success.
Can anyone suggest to which date should i reset the BIOS or anyother workarounds??
I have run diagnostic tests on Memory and Disks and both are fine.
* There is a big problem with the HP recovery manager which fails to recover windows. Many have reported in this forum and other forums....but HP has failed to attend this issue and fix the problem in their recovery manger or atleast show a workaround to restore the windows.
My laptop was drastically slow after the reinstall from the HP support.....and now when i decided to reset and recover the windows.....it fails. Unfortunately my laptop is out of warranty.
This is pushing me away from any HP and will never ever buy or recommend anyone to buy a HP product.
History about previous issue with this laptop:
Order # BDRN598901
Order # BDTP356101
* I had an issue with the HP recovery manager in creating recovery disc. I did contact the HP support as my warranty was still in place. They took my laptop and reinstalled the OS and sent it back to me.
Even after that i could not create a recovery disk and they send me a USB recovery device.
Service Order Product Service Event Order Status Estimated Delivery Date *MM/DD/YYYY Track this Shipment
BDTP356101 USB - WINDOWS 8 64B RECOVERY KIT SW FULFILLMENT POSTAL DELIVERY GROUND Shipped 05/05/2014 POSTAL SERVICE (STANDARD)
Service Order Product Service Event Order Status Estimated Delivery Date *MM/DD/YYYY Track this Shipment BDRN598901 HP ENVY 4-1115DX TouchSmart Ultrabook BOX PLUS PICKUP & REPAIR, 2 DAY SHIPPING Shipped 04/30/2014 FED-EX NEXT DAY (AFTERNOON)
Thanks,
KB29

Set the date in BIOS to 1/02/2012. Save & Exit. Boot with Recovery, let it run through the process- but on the first reboot initiated by recovery enter BIOS again to insure date is still set to 2012. If not change it again, then let recovery resume.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

I had a problem with the hard disk on a 2010 macbook pro. Replaced the hard disk with an Hitachi 1TB and when I tried to erase and format It fails with input/output error. Any help much appreciated!

I had a problem with the hard disk on a 13" 2010 macbook pro. Replaced the hard disk with an Hitachi 1TB disk but when I tried to erase and format, it fails with input/output error and at other times saying unable to allocate memory. Any help much appreciated!

Zap the PRAM and Reset the SMC, then try again.

Package failed with run time error: " GETWA_NOT_ASSIGNED".

Hi,
One of our custom package is failing with run time error " GETWA_NOT_ASSIGNED". We are getting this error after refresh. Infact this package is working fine both in production and Dev, but in QA system it giving runtime error.
Here with I am pasting run time error details. Please see...If any one have any idea or clue or if you have faced this kind of error.
Thanks is advance.
Error Details.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "CL_UJK_CUSTOM_LOGIC===========CP" had to be
     terminated because it has
    come across a statement that unfortunately cannot be executed.
What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
    You attempted to access an unassigned field symbol
    (data segment 32774).
    This error may occur if
    - You address a typed field symbol before it has been set with
      ASSIGN
    - You address a field symbol that pointed to the line of an
      internal table that was deleted
    - You address a field symbol that was previously reset using
      UNASSIGN or that pointed to a local field that no
      longer exists
    - You address a global function interface, although the
      respective function module is not active - that is, is
      not in the list of active calls. The list of active calls
      can be taken from this short dump.
Regards, Trine

Hi Trine,
the error is about some field you are trying to map using field-simbols, that is diferent in the other system.
Go to the code program in the st22, there you will see when the erros occurs e what field gives the error.
Best Regards,
António

Backup Fails with Invalid RECID Error

Hi All,
Please help me to understand Caution -section
below text is from
[http://download.oracle.com/docs/cd/B10501_01/server.920/a96566/rcmtroub.htm#447765]
Backup Fails with Invalid RECID Error: Solution 2
This solution is more difficult than solution 1:
To create the control file with SQL*Plus:
   1. Connect to the target database with SQL*Plus. For example, enter:
      % sqlplus 'SYS/oracle@trgt AS SYSDBA'
   2. Mount the database if it is not already mounted:
      SQL> ALTER DATABASE MOUNT;
   3. Back up the control file to a trace file:
      SQL> ALTER DATABASE BACKUP CONTROLFILE TO TRACE;
   4. Edit the trace file as necessary. The relevant section of the trace file looks something like the following:
      # The following commands will create a new control file and use it
      # to open the database.
      # Data used by the recovery manager will be lost. Additional logs may
      # be required for media recovery of offline data files. Use this
      # only if the current version of all online logs are available.
      STARTUP NOMOUNT
      CREATE CONTROLFILE REUSE DATABASE "TRGT" NORESETLOGS ARCHIVELOG
      -- STANDBY DATABASE CLUSTER CONSISTENT AND UNPROTECTED
          MAXLOGFILES 32
          MAXLOGMEMBERS 2
          MAXDATAFILES 32
          MAXINSTANCES 1
          MAXLOGHISTORY 226
      LOGFILE
        GROUP 1 '/oracle/oradata/trgt/redo01.log' SIZE 25M,
        GROUP 2 '/oracle/oradata/trgt/redo02.log' SIZE 25M,
        GROUP 3 '/oracle/oradata/trgt/redo03.log' SIZE 500K
      -- STANDBY LOGFILE
      DATAFILE
        '/oracle/oradata/trgt/system01.dbf',
        '/oracle/oradata/trgt/undotbs01.dbf',
        '/oracle/oradata/trgt/cwmlite01.dbf',
        '/oracle/oradata/trgt/drsys01.dbf',
        '/oracle/oradata/trgt/example01.dbf',
        '/oracle/oradata/trgt/indx01.dbf',
        '/oracle/oradata/trgt/tools01.dbf',
        '/oracle/oradata/trgt/users01.dbf'
      CHARACTER SET WE8DEC
      # Take files offline to match current control file.
      ALTER DATABASE DATAFILE '/oracle/oradata/trgt/tools01.dbf' OFFLINE;
      ALTER DATABASE DATAFILE '/oracle/oradata/trgt/users01.dbf' OFFLINE;
      # Configure RMAN configuration record 1
      VARIABLE RECNO NUMBER;
      EXECUTE :RECNO := SYS.DBMS_BACKUP_RESTORE.SETCONFIG('CHANNEL','DEVICE TYPE DISK
      DEBUG 255');
      # Recovery is required if any of the datafiles are restored backups,
      # or if the last shutdown was not normal or immediate.
      RECOVER DATABASE
      # All logs need archiving and a log switch is needed.
      ALTER SYSTEM ARCHIVE LOG ALL;
      # Database can now be opened normally.
      ALTER DATABASE OPEN;
      # Commands to add tempfiles to temporary tablespaces.
      # Online tempfiles have complete space information.
      # Other tempfiles may require adjustment.
      ALTER TABLESPACE TEMP ADD TEMPFILE '/oracle/oradata/trgt/temp01.dbf' REUSE;
      # End of tempfile additions.
   5. Shut down the database:
      SHUTDOWN IMMEDIATE
   6. Execute the script to create the control file, recover (if necessary), archive the logs, and open the database:
      STARTUP NOMOUNT
      CREATE CONTROLFILE ...;
      EXECUTE ...;
      RECOVER DATABASE
      ALTER SYSTEM ARCHIVE LOG CURRENT;
      ALTER DATABASE OPEN ...;
Caution:
      If you do not open with the RESETLOGS option,
then two copies of an archived redo log for a given log sequence number may
exist--even though these two copies have completely different contents.
For example, one log may have been created on the original host and the other on the new host.
If you accidentally confuse the logs during a media recovery,
then the database will be corrupted but Oracle and RMAN cannot detect the problem.

Please help me to understand Caution -section
Caution:
If you do not open with the RESETLOGS option,
then two copies of an archived redo log for a given log sequence number may
exist--even though these two copies have completely different contents.
For example, one log may have been created on the original host and the other on the new host.
If you accidentally confuse the logs during a media recovery,
then the database will be corrupted but Oracle and RMAN cannot detect the problem.As per my understanding it says. If you don't open database with RESETLOGS option then there may be archived logs with log sequence number which is already archived on the source host. This may happen due to difference in RECIDs. Now when the database needs media recovery for this particular log sequence, you may provide any of them. So in this case, RMAN and Oracle will not be able to differentiate the two files and can accept any of the archived log files during recovery. Since the contents of two archived logs are different, because they are generated at different times and they contains different transactions. So, internally it corrupts your database.
Rgds.

Processing data for a remote command failed with the following error message: Error occurred during the Kerberos reponse.

Hi!
We have 5 Exchange 2013 servers and when I’m trying to run a script that includes the cmd-let Get-MessageTrackinglog with StartDate = the first of the month and with EndDate = the end of the month I get the following error message after
a couple of hours. The script is run on the server SERVER01 and goes through the Message Tracking logs of all Exchange servers. I have tried the script on other servers and get the same result.
Processing data for a remote command failed with the following error message: Error occurred during the Kerberos reponse.
[Server=SERVER01, TimeStamp = 918/2014 19:32:34]
For more information, see the about_Remote_Troubleshooting Help topic.
    + CategoryInfo
: OperationStopped: (server01.domain.com:String) [], PSRemotingTransportException
    + FullyQualifiedErrorId : JobFailure
    + PSComputerName
: server01.domain.com
I have gone through “about_Remote_Troubleshooting Help topic”, but can’t find anything related to my issue. There is nothing in the Application or the Windows PowerShell log either.
/Henrik

Hi Henado
Check the time on your Exchange server(s) relative to the DCs and ensure they are in correct sync
Use another account which is assigned the Organization Management permission and log to to the server run the command in shell and see the results
Run
Add-PSSnapin -Name Microsoft.Exchange.Management.PowerShell.E2010
Set-Adserversettings -ViewEntireForest $True and then run message tracking command and see the results
If none of the above helps you may need to remove and re-install the WinRM and see the results
Good Luck :)
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

Background job failing with license check error

Hi Experts
In our ERP 6.0 system ,all the background jobs are failing with license check error.
Have checked the license in SLICENSE and the license is fine.
There is no warning while users are loggign in ,but when any background job is runing its failing with error
Job started
Logon not possible (error in license check)
Job cancelled after system exception ERROR_MESSAGE
Also performed the license test which is failing
F:\usr\sap\XX1\SYS\exe\uc\NTAMD64>saplicense -test pf=F:\usr\sap\XX1\SYS\profile
\XX1_DVEBMGS00_host_xx
Protocol saplicense test:
Read sapsytem name
       ok, sapsytem name = XX1
Read message server host
       ok, host = hostname
Read message server service port
       ok, service port = sapmsXX1
Connect to message server
       ok, connect done
Read hardware key from message server
       ok, got hardware key
Detach from message server
       ok, detached
Check hardware key
       ok, hardware key = T0343073854
Connect to database
       ok, connected
Check license
       ok, check done
Disconnect database
       ok, database disconnected
test result: license test failed
LICENSE system: XX1 hardware key: T0343073854 expiration_date:
        installation no: key:
        userlimit: 0 productid: R3_BASIS
        system-nr:
license expired ***
Please suggest how to troubleshoot.
Regards
Ajay

@Michael
In SLICENSe the Hardware key field is not BLUE or BLACK and its showing the exact hardware key which i can see at OS level with saplicense -get command.
@Jagadish
Note is good refrence, i reiinstalled the Digitally signed license with saplikey command and it was successful.
But still the license test is failing at OS Level..below is the command prompt output.
===================================================================
F:\usr\sap\XX1\SYS\exe\uc\NTAMD64>saplikey -install C:\license_script_XX.txt pf
=F:\usr\sap\XX\SYS\profile\XX_DVEBMGS00_mngsez148079
SAP License Key Administration - Copyright (C) 2003 SAP AG
2 SAP license key(s) successfully installed.
F:\usr\sap\XX\SYS\exe\uc\NTAMD64>saplicense -test pf=F:\usr\sap\XX1\SYS\profile
\MD1_DVEBMGS00_mngsez148079
Protocol saplicense test:
Read sapsytem name
       ok, sapsytem name = XX1
Read message server host
       ok, host = host
Read message server service port
       ok, service port = sapmsXX1
Connect to message server
       ok, connect done
Read hardware key from message server
       ok, got hardware key
Detach from message server
       ok, detached
Check hardware key
       ok, hardware key = T0343073854
Connect to database
       ok, connected
Check license
       ok, check done
Disconnect database
       ok, database disconnected
test result: license test failed
LICENSE system: XX1 hardware key: T0343073854 expiration_date:
        installation no: key:
        userlimit: 0 productid: R3_BASIS
        system-nr:
license expired ***
============================================================
@Juan
The hardware key was changed and we requested a new license with new hardware key,system was runing fine for couple of weeks with all background jiobs for SPAM./SAINT Ok .We performed EHP4 on this system.
But now this issue is here,so i guess we should troubleshoot.
Please let me know any other pointers.
Regards
Ajay
PS In SLICENSE new installed license is fine and all users can login.

Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)

Hi,
I am trying to install certificate services on a windows 2008 server (R2 ENT SP1) with a PCIe nCipher HSM module installed on it. The version of nCipher SW is = 11.30. It is a RootCA, and I am trying to use a key that is already stored in the HSM (I
have done this before with a PCI HSM (older HW version)). I select “Use existing private key” and “Select an existing private key on this computer” on the wizard, then i change the CSP to nCipher and click on "search" the key I am looking for
appears and I select that one. I repeat, I have done this before and it works with a PCI HSM module.
The installation is finished before being prompted to insert the operator cards, and it ends with two errors:
<Error>: Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)
And:
<Error>: Active Directory Certificate Services setup failed with the following error: The group or resource is not in the correct state to perform the requested operation.
0x8007139f (WIN32: 5023)
The servermanager.log says:
1856: 2014-07-23 18:27:48.195 [CAManager] Sync: Validity period units: Years
1856: 2014-07-23 18:27:48.928 [Provider] Error (Id=0) System.Runtime.InteropServices.COMException (0x800703E5): CCertSrvSetup::Install: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)
at Microsoft.CertificateServices.Setup.Interop.CCertSrvSetupClass.Install()
at Microsoft.Windows.ServerManager.CertificateServer.CertificateServerRoleProvider.Configure(InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
1856: 2014-07-23 18:27:48.928 [Provider] CAErrorID: 0, CAErrorString: 'Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress.
0x800703e5 (WIN32: 997)'
1856: 2014-07-23 18:27:48.928 [Provider] Adding error message.
1856: 2014-07-23 18:27:48.928 [Provider] [STAT] For 'Certification Authority':
And:
1856: 2014-07-23 18:27:49.053 [CAWebProxyManager] Sync: Initializing defaults
1856: 2014-07-23 18:27:49.162 [Provider] Error (Id=0) System.Runtime.InteropServices.COMException (0x8007139F): CCertSrvSetup::Install: The group or resource is not in the correct state to perform the requested operation. 0x8007139f (WIN32: 5023)
at Microsoft.CertificateServices.Setup.Interop.CCertSrvSetupClass.Install()
at Microsoft.Windows.ServerManager.CertificateServer.CertificateServerRoleProvider.Configure(InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
1856: 2014-07-23 18:27:49.162 [Provider] CAErrorID: 0, CAErrorString: 'Active Directory Certificate Services setup failed with the following error: The group or resource is not in the correct
state to perform the requested operation. 0x8007139f (WIN32: 5023)'
1856: 2014-07-23 18:27:49.162 [Provider] Adding error message.
Has anyone experienced this before? Am I missing something here?
Any help will be very appreciated
Thanks in advance
Best regards
Alejandro Lozano Villanueva

Hi, thanks for your support.
I have been playing around a bit with some ncipher commands and found this:
C:\Program Files (x86)\nCipher\nfast\bin>cspcheck.exe
cspcheck: fatal error: File key_mscapi_container-1c44b9424a23f6cddc91e8a065241a0
9aa719e4f (key #1): 0 modules contain the counter (NVRAM file ID 021c44b9424a23f
6cddc91)
cspcheck: information: 2 containers and 2 keys found.
cspcheck: fatal error occurred.
If I perform the same command on the original server (the server with the original kmdata folder and with the running RootCA services):
E:\nfast\bin>cspcheck.exe
cspcheck: information: 2 containers and 2 keys found.
cspcheck: everything seems to be in order.
Strange?
Moreover, when I do a csptest.exe command (also on both servers, i find this)
On the new server:
C:\Program Files (x86)\nCipher\nfast\bin>csptest.exe
nCipher CSP test software
=========================
Found the nCipher domestic CSP named 'nCipher Enhanced Cryptographic Provider'
Provider name: nCipher Enhanced Cryptographic Provider
Version number: 1.48
User key containers:
Container 'csptest.exe' has no stored keys.
Container 'Administrator' has no stored keys.
Machine key containers:
Container '352dd28a-17cb-4c6f-b6e4-bf39bcf75db5' has a 2048-bit signature key.
Container 'ROOTCA' has no stored keys.
Container 'csptest.exe' has no stored keys.
While in the old server:
E:\nfast\bin>csptest.exe
nCipher CSP test software
=========================
Found the nCipher domestic CSP named 'nCipher Enhanced Cryptographic Provider'
Provider name: nCipher Enhanced Cryptographic Provider
Version number: 1.40
User key containers:
Container 'csptest.exe' has no stored keys.
Machine key containers:
Container '352dd28a-17cb-4c6f-b6e4-bf39bcf75db5' has a 2048-bit signature key.
Container 'ROOTCA' has a 2048-bit signature key.
Container 'csptest.exe' has no stored keys.
As you can see, the container called ROOTCA, which is the one that I use during the installation, says it has no stored keys. While on the old server, it says it contains a key. Why is this happening? I dont know, I am copying the complete
key management folder from one server to another and initialize the security world with that folder as I always do, and i dont have any errors during this procedure.
Do you know what could be the cause of this? or how can I fix this? Thanks a lot, best regards.
Alejandro Lozano Villanueva

WebI - pdf creation failed with RWI 00236 Error

Similar Messages

Maybe you are looking for