WebI Processing server 4.0 and its common services
Hello there.
Tried to search here as well in SAP notes area, but did not find anything useful. Problem here is that the default WebI processing server was deleted and when I'm trying to create it from a scratch it allows to add only single service, for example: WebIntelligence Core service or WebIntelligence Common service etc.
By default WebI pro server consists of Core, Processing,Common, Information Engine service... ok the last one can be added to APS server, but how to get tose 3 Core/Common/Processing to single server, I can't add them from a list because it's empty. I do not want to recreate the SIA node, but the problem here is that one of those services consuming huge amount of memory...more than 6GB of mem and I do not see the switch how to turn it out.
many thanks in advance
Hi again
I do not like to bump like this, but maybe somebody have any idea how to deal with it? Maybe it makes sense to add this question to diferent thread?
Aiwar
Similar Messages
-
Ensure that a webi processing server is dedicated to a certain publication
Hi there
I'am working on setting up a BO XI 3.1 sp6 cluster. I would like to ensure that heavy monthly publications will run correctly even if one or many users launch very long report s at the same time. ( both DESKI ans WEBI)
The idea was to define a servers group and to dedicate our montly publications to these group. But it seems that it is not possible to prevent other publications to use servers of this group and overload them.
Is there a workaround, or at least a way to reduce the probability of such a problem?
thanks in advance for ideas!Hi Irfan,
Thanks for taking time to answer.
I already considered the actions you describe, but I concluded that it was not a solution.
But, maybe I'm wrong!
For instance if my monthly publication start at 20:00, It will use the defined webi processing server in the "pubServerGroup".
If some users launch a heavy refresh or "instant scheduled" at 19:54, he may use the very webi Processing Server as it could be the "first available server".
In fact I'm afraid that this will reduce the efficiency of the default load balancing system.
Or, maybe, when a publication is scheduled at 20:00 its server group is flagged as “non available” even a few minutes before? It is not very likely, is it?
regards
Marc -
BO4 - 30270+ Frequent webi processing server crashes/processing server stopped unexpectedly
Hi ,
We are seeing relatively frequent 30270 error messages - when check event logs often see them preceded by webi porcessing server stopped unexpectedly messages.
Have split the aps as per best practice and have 4 webi processing servers ( 2 on each node)
Any thoughts?
Faulting application name: WIReportServer.exe, version: 14.0.8.1229, time stamp: 0x525dbf5c
Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8e
Exception code: 0xc0000374
Fault offset: 0x00000000000c40f2
Faulting process id: 0x12dc
Faulting application start time: 0x01cf32eaa201a083
Faulting application path: C:\bo4\SAP BusinessObjects Enterprise XI 4.0\win64_x64\WIReportServer.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Report Id: e4a37101-9efd-11e3-9ebb-000c29ccd95d
30270 message soften preceded by below in event logs (estimate 80% of time)
[User Name: <username>]
Server Intelligence Agent: server<server_name>.WebIntelligenceProcessingServer2 stopped unexpectedly.
Node Name: <node_name>]Hi Philip,
I can feel like few of the heavy webi reports in your environment causing webi processing server down.
1) first we need to find which reports are causing the issue.
2) Enable monitoring to know the failure status of WIPC by email
3) Try to enable audit and capture the reports which are consuming more data and running when WIPS moved to stopped state
Then you will come to know the report with help of audit .
I have noticed the similar issue and noticed few reports which are retrieving more no of records and More no input cantrols in the report caused WIPS down. -
Webi processing server down when executing on bw query
Hi there,
I have an OLAP universe built on a BW query, which in turn is built on DSO. It returns around 100k records. If 20 objects are included in the webi query, the webi processing server will be down, with status of "starting..." (checked in CMC).
However, if I build a universe on the active table of DSO directly, the webi query executes perfectly even with 180 objects included.
I understand the performance difference between this two approach and it's acceptable. But the behavior of webi processing server is not acceptable. Does anybody else have this issue too?
My env is BOE XI 3.1 SP2
Thanks,
ChrisHi,
you should be at least on BW 7.01 SP05. Before that there is a 1 million cell limit in the interface and 100.000 Rows x 20 items is more than 1 million
ingo -
Webi Processing Server _ Performance Settings.
Hi all,
How to modify the Wb Intelligence Processing Server Performance Settings in BO XI3.1
Thanks
Reddeppa kHi,
you can change the webi processing server settings by logging on the CMC (URL: http://<name of your BOBJ server>/CmcApp as administrator. Just invoke the "servers" panel and select your web intelligence processing server. Over the context menu (left mouse button) select the option "properties". You can modify several parameters there. For more information look in the BOE administration guide:
[http://help.sap.com/businessobject/product_guides/boexir31/en/xi3-1_bip_admin_en.pdf]
You have to restart the webi server (invoke again the context menu and select Restart Server) so that the new settings will be applied.
Regards,
Stratos -
How to find out BPEL process server is up and running?
Hi All,
We are invoking a synchronous BPEL process from our application.
Incase of any network failures, we want to switch to other flow.
Is there any way to find out the BPEL process server is up and running?
Thanks,
Uma.Try accessing the dynamic wsdl (http://server.com:7777/orabpel/default/service/1.0/service?wsdl)
from your application. If there's no error opening this page using http get, the server is alive :)
Marc -
Webi processing server restarts automatically
Dear all,
My Web Intelligence processing server automatically recycles (restarts) in ten minumtes even the users are actively accessing the webi reports. Anyone know whether there are any ways to bypass this problem?
(I checked the parameters of webi processing servers and they should not cause the servers to recycle in 10 mins)
ThanksThanks. Does it mean the command line parameter under 'Adapative Processing Server'? i.e., -Xms32m and -Xmx256m in the following text?
>>>
"-server" "-Dbobj.javaserver.home=/bi_01/boe31/bobje/enterprise120//java/server" "-Dcom.businessobjects.pjs.common.dir=/bi_01/boe31/bobje/java/lib/" "-Dcom.businessobjects.pjs.conf.file=/bi_01/boe31/bobje/enterprise120//java/server/conf/config.xml" "-Dorg.apache.geronimo.base.dir=/bi_01/boe31/bobje/enterprise120//java/server/platform" "-Djava.io.tmpdir=/bi_01/boe31/bobje/enterprise120//java/server/platform/var/temp" "-Dbusinessobjects.logs.home=/bi_01/boe31/bobje/logging/" "-Xms32m" "-Xmx256m" "-DXorg.apache.geronimo.gbean.NoProxy=true" "-Djava.net.preferIPv4Stack=false" -jar "/bi_01/boe31/bobje/enterprise120//java/server/bin/boeserver.jar" "-workdir" "/bi_01/boe31/bobje/enterprise120//java/server/work"
<<<
If this is correct, the maximum value I can set for Xmx is 1024m, i.e., -Xmx1024m.
Please kindly suggest and comment.
Thanks -
Office Web Apps Server 2013 patching and reported build numbers
Sorry ahead of time for asking this on a Sharepoint forum, but I can't find OWAS forums anywhere.
When applying patches to Office Web Apps Server the build version as reported by Control Panel | Program and Features does not change. RTM build number is 15.0.4420.1017. KB2760445 moves version to 15.0.4481.1005. You can install it but
the version/build number as reported by control panel will not change. I can't find information on build versions on MS website. I am using Roger Haueter blog
here to help me with that. I tries manually downloading updates and applying them as well as relying on WSUS and MS Update. Results are the same. You can see the updates under "installed updates".
Please, share you knowledge.This is normal. See these sites for how to identify the build number of the farm:
http://www.wictorwilen.se/office-web-apps-server-which-version-is-installed
http://blogs.technet.com/b/sammykailini/archive/2013/09/20/how-to-find-the-version-or-build-number-for-an-office-web-apps-2013-farm.aspx
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
IPlanet Web Proxy Server 3.6 and emptying out the cache.
Hello.
I'm wanting to empty out our proxy server's cache in an attempt to resolve one of our users help desk problems - a web site they are accessing is not loading correctly when going through the proxy server, bypassing the proxy server works.
The problem is that the technician who implemented our iPlanet Web Proxy Server 3.6 has left the company and no one else is aware of how to do this. Can anyone advise of what has to be done to achieve it? Thank you.
Kind regards,
Jimmey.Hi
This as per the HTTP/1.1 RFC (RFC2616)
The Connection general-header field allows the sender to specify options that are desired for that particular connection and MUST NOT be communicated by proxies over further connections.
The Connection header has the following grammar:
Connection = "Connection" ":" 1#(connection-token)
connection-token = token
HTTP/1.1 proxies MUST parse the Connection header field before a message is forwarded and, for each connection-token in this field, remove any header field(s) from the message with the same name as the connection-token. Connection options are signaled by the presence of a connection-token in the Connection header field, not by any corresponding additional header field(s), since the additional header field may not be sent if there are no parameters associated with that connection option.
Read the following at
http://www.w3.org/Protocols/rfc2616/rfc2616-sec8.html#sec8.1.3
and
http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.10
Regards
Nagendra HK -
Help: Process control - kill itself and its phater
Friends,
If I use the Process control. Is it possible to use the Process Control 'Cancel workflow' to kill ONLY the actual sub-wf and its phater, without killing its grandfhater ?
Grandfhater - WF
Fhater - Sub-WF
Actual Sub-WF (Using Process control here)
I want to kill only this actual and its fhater. I want the grandfhader alive and go on.Create Container element[like status] in Father SUB-WF and In Actual SUB-WF.
Based on condition if you want to terminate Actual SUB_WF and Father SUB-WF then set the set container element status = 'X' and then use process control [terminate workflow] this will terminate Actual SUB-WF.
then do the binding fo container element status from Actual SUB WF to Father SUB WF.
Then in the father SUB WF check the container element status . if Status = 'X'. then use process control to terminate the Father SUB WF.
In the process control use terminate workflow. -
Getting all webI reports in a folder and its sub-folders using java sdk.
hi,
I need a java code to get the Id of all webi reports in a folder and recursive sub folders .
Is there any sample code or tutorial available for It?
regards,
nitinI didn't test this but it should work. Import required packages.
<%
String username = "administrator";
String password = "<password>";
String cmsname = "<cmsname>";
String authtype = "secEnterprise";
IEnterpriseSession oEnterpriseSession = CrystalEnterprise.getSessionMgr().logon(username, password, cmsname, authtype);
IInfoStore oInfoStore = (IInfoStore)oEnterpriseSession.getService("","InfoStore");
getWebi(oInfoStore,0,out);
oEnterpriseSession.logoff();
%>
<%!
public void getWebi(IInfoStore oInfoStore, int sourceFolderID, javax.servlet.jsp.JspWriter out)
try
String query = "select * from ci_infoobjects where si_kind='webi' and si_instance =0 and si_parentid =" + sourceFolderID ;
IInfoObjects oInfoObjects = oInfoStore.query(query);
for(int i=0;i< oInfoObjects.size(); i++)
IInfoObject oInfoObject = (IInfoObject) oInfoObjects.get(i);
out.println(oInfoObject.getID() + " " + oInfoObject.getTitle() +"<br>");
String query = "select * from ci_infoobjects where si_kind='folder' and si_parentid = " + sourceFolderID ;
oInfoObjects = oInfoStore.query(query);
for(int i=0;i< oInfoObjects.size(); i++)
IInfoObject oInfoObject = (IInfoObject) oInfoObjects.get(i);
getWebi(oInfoStore, oInfoObject.getID(), out);
catch(SDKException e)
out.println(e.toString());
%> -
ACS 5.0 and Cisco common services integration
Hi all
Has anyone here successfully integrated Cisco common services into ACS 5.0?
I have successfully done this with ACS 4.2 but I dont think CS understands the new way to connect to ACS 5.
I have already read the following guide, it basically fails when you click the apply button under AAA mode in CS to connect to the ACS server.
http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps6528/ps2425/prod_white_paper0900aecd80613f62.html
So I can see port 49 connects but CS cannot access the web interface to deploy its authorization sets.
-Tacacs+ Connectivity Reachable
-HTTP/HTTPS Connectivity Not Reachable
Protocol mismatch detected.
Ive tried both http and https, get same error
Any suggestions would be helpful.
Cheers all
DaleAnswered by Cisco here
http://forums.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Network%20Infrastructure&topic=Network%20Management&topicID=.ee71a02&fromOutline=&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.2cd43d08 -
Office Web Apps Server 2013 - No download Volume Licensing Service Center
I´m looking for a office web apps server 2013 (OWS) download.
In the following blog Microsoft is announcing that the OWS is moving from the Download Center to the Volume Licensing Service Center (VLSC).
http://blogs.technet.com/b/office_sustained_engineering/archive/2014/10/22/web-apps-server-removal-from-download-center.aspx
So far so good
But in my VLSC are only Updates and Service Packs for the OWS. But no download for the OWS!
Is this only my problem? Any ideas to solve this problem?Hi,
You can contact the Volume Licensing Service Center to get the answer to this case.
Refer to this link below, and select your country to get the Support Center Contact Information:
https://www.microsoft.com/licensing/servicecenter/Help/Contact.aspx
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
How to install Discoverer 11g on Web Logic Server with Forms and Reports 11g Rel2
Hello,
We finally started to migrate from Oracle iAs 10g Release 2 to Oracle Forms and Reports 11g Release 2 using Web Logic. I don't see an option to install Discoverer on the server.
My OS: windows 2008 R2
Installed Web Logic 10.3.6
Forms & Reports: 11.1.2.2.0_64 (64 Bit Forms)
How do I install Discoverer Plus in 11g? All I can find is Discoverer 11g Desktop/Administrator to run on User work Station. We were using discoverer Plus in 10g iAS.
Thanks
Rao907485 wrote:
Hi:
I need to install oracle 11g from VNC viewer. The VNC is stalled on linux. I managed login. Now I have a screen that has some icons on the top like, Connection Options, "i", refresh, CTRl, ...
under that I have
Accept clipboard from viewers
Send clipboard to viewers
Send primary selection to viewers
From the Connection Options window, I checked Hextile for Use encoding and Let remote server deal with mouse cursor.
What is next? How do I connect to the server. (When I login I used hostname:1)
Thankyou.we only know what you post.
where does linux reside?
where is VNC installed? -
Hi
I am Setting A Lab Scenario That the PC name "Core2012" i.e. Server Core 2012 Will be Domain Controller.
Using PowerShell I have done this Task
Change hostname ; Configure IP address and Preferred DNS address ; Disable IPv6 ;
Configure Firewall ; Even Active Directory Role install.
Now problem occur
Well I have know to install DNS role install-WindowsFeature DNS
Ok
But;
How to configure FQDN ; Restore mode password ; Setting up global catalog server ;and configure Reverse Lookup zone Using powershell
I have search many Forums but I am not getting to touch with it.
So I Need a help to set and Configure DNS using Powershell
Thank You!!!
sagarpdalviHi Sagarpdalvi,
To set the Safe mode password with powershell, please refer to the cmdlet Install-ADDSDomainController, to enable global catalog(GC), please run the cmdlet "Set-ADObject" after install Active Directory on the core server, to configure Reverse Lookup zone,
please refer to the cmdlet
Add-DnsServerPrimaryZone.
To configure DC with powershell, please check the scripts:
Installing a Domain Controller on Windows Server 2012
R2 Core
Enabling and Disabling the Global Catalog
To configure DNS, the Domain Name System (DNS) Server Cmdlets should be helpful for you:
http://technet.microsoft.com/en-us/library/jj649850.aspx
I hope this helps.
Maybe you are looking for
-
Hi Guys, I have one query in the smartforms, I can able to convert the smartform to PDF and saving the PDF in my DESKTOP directly with showing the POP_UP, when i choose the print preview in the POP-UP screen. *My Requirement is : I need to display th
-
Actions in Integration Scenario
Dear all, 1. Can anyone tell the difference between Internal action and External action with respect to products and SWCV? 2. What is the Template option you find when you insert an application component? Expecting your valid replies; if possible ple
-
Error when posting to Facebook
Hi Folks, I'm using IPhoto 11. I highlighted a photo--->share---->Facebook. Entered my login informaton. hit the button. waited several seconds. I get "There was an unexpected error, please try again later". Anyone else having trouble with this or a
-
ITunes adding music from external drive to multiple users
Here's what I have: My iMac currently has 3 different user accounts on it. My iTunes library is currently stored on my external HD and its location is set to route to the external drive on both accounts. I currently have both boxes checked to Keep fi
-
I need to use a table that has rows that are longer than the page, but they just disappear when I get to the bottom of the page. How can I get the text to wrap to the next page but stay in the same cell? The text has a lot of formatting, so I don't t