Webi Report on BW Universe works in DEV but not properly in TEST

Hi,
We have created a Webi-Report on a BW Universe on our DEV server. Everything works like a charm and we are prompted as the first thing for keydate and the report is refreshed successfully. We then export the Universe (no connection overwrite) and Report to our TEST server with the Export Wizard and the problems start.
When we refresh the report on the TEST server we are prompted for keydate. If we select a value for the date we receive an error:
A database error occured The database error text is: The MDX (and then some MDX) failed to execute with the error Specify a value for variable Financial Statement Version. (WIS 10901)
If we select Use default value the report refreshes but no currency conversion is done. We can then refresh the report again and this time if we select a value for the keydate the report refreshes without the above error.
We have tried to overwrite the connection during export from DEV to TEST so the connection points to our DEV BW Server with the same result. If we create the universe on the TEST server from scratch everything works as intended.
If we transport the Universe and report from DEV to PROD directly the report works as intended.
The BO user (SSO WinAd) testing this have admin rights on BO. The connection in the univers to BW is done using a fixed username and password (no SSO to BW)
I am now out of options and would appreciate any input you might have to solve this problem.
Best Regards,
Lars

Hi Wavery,
Thanks for your reply. I have checked the connections and they are named exactly the same on DEV/TEST/PROD. I have also tried deleting the universe, connection and report on TEST and then do a new transport of all of them from DEV to TEST. Same result.
What I don't understand is why the refresh works if I do it in two steps:
<OL>
<LI>
I set keydate to "use default value" when prompted and the report will refresh without the keydate dependent calculations. None keydate dependent measures are showing correct values from BW.
</LI>
<LI>
Then I refresh again and set the keydate to a date and the report refreshes with the dependent calculations.
</LI></OL>
This tells me the connection is working and the problem is somewhere else. At the moment I'm clueless
Any input is highly appreciated.
Thanks,
Lars

Similar Messages

Specific extractor works in DEV but not in QUAL

Hello Everybody
I have new problem : I created a specific extractor ZCRM_SRV_PROCESS_I based on specific FM based on RSAX_BIW_GET_DATA_SIMPLE.
This extractor have to retrieve specific fields of Service Order Item (linked document type BUS2000116)
In DEV it works fine for loading INIT & DELTA
In QUAL, loading INIT does not work but loading works for some records...
Loading finish with following message :
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Job is cancelled in source system with small text :
19.04.2011 14:51:05 Job started
19.04.2011 14:51:05 Step 001 started (program SBIE0001, variant &0000000022545, user ID ALEREMOTE)
19.04.2011 14:51:05 Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
Do you know why it works in DEV but not in QUAL ?
Thank you
Cyril
Edited by: cyril meslin on Apr 20, 2011 9:53 AM

There is no problem of authorization. In RSA3 it's ok for some records but too long for full of records.
In fact, my FM make a first select after to be determined init or delta mode :
IF i_updmode = 'D'.
        SELECT i~guid h~object_id h~guid h~process_type
                 INTO TABLE st_zcrmt_bw_i
                 FROM crmd_orderadm_h AS h
                 INNER JOIN crmd_orderadm_i AS i ON h~guid = i~header
                 WHERE h~object_id    IN lr_object_id
                   AND h~changed_at   >= lv_timestp
                   AND i~guid         IN lr_item_guid
                   AND ( i~product_kind <> 'X' OR i~product_kind <> '' )
                   AND ( h~process_type = 'ZSOL'
                      OR h~process_type = 'ZSPE'
                      OR h~process_type = 'ZSVO'
                      OR h~process_type = 'ZSVT' ).
      ELSE.
        SELECT i~guid h~object_id h~guid h~process_type
                 INTO TABLE st_zcrmt_bw_i         "PACKAGE SIZE I_MAXSIZE
                 FROM crmd_orderadm_h AS h
                 INNER JOIN crmd_orderadm_i AS i ON h~guid = i~header
*                 UP TO I_MAXSIZE ROWS
                 WHERE h~object_id    IN lr_object_id
                   AND i~guid         IN lr_item_guid
                   AND ( i~product_kind <> 'X' OR i~product_kind <> '' )
                   AND ( h~process_type = 'ZSOL'
                      OR h~process_type = 'ZSPE'
                      OR h~process_type = 'ZSVO'
                      OR h~process_type = 'ZSVT' ).
      ENDIF.
Then FM CRM_ORDER_READ is running for 500 records to retrieve header data :
CALL FUNCTION 'CRM_ORDER_READ'
    EXPORTING
      iv_no_auth_check     = abap_true
      it_header_guid       = it_guids      "500 records
      it_requested_objects = lt_requested_objects
    IMPORTING
      et_orderadm_h        = lt_orderadm_h
      et_service_os        = lt_service_os.
Then this FM is running for 10 records for item data (max 10 because FM CRM_ORDER_READ does not work for more records) :
CALL FUNCTION 'CRM_ORDER_READ'
    EXPORTING
      iv_only_spec_items   = abap_true
      it_item_guid         = it_guids         "10 records
      it_requested_objects = lt_requested_objects
    IMPORTING
      et_orderadm_i        = lt_orderadm_i
      et_sales             = lt_sales
      et_appointment       = lt_appointment
      et_status            = lt_status
      et_text              = lt_text
      et_subject           = lt_subject
      et_doc_flow          = lt_doc_flow
      et_customer_i        = lt_customer_i
Perhaps if I succeeded to improve SELECT & call of CRM_ORDER_READ, it would be better but I don't know how to do...

Web sites containing mms links work in IE but not Firefox 4.0

Web sites containing mms links work in IE but not Firefox 4.0. when I play the video in IE, I go into IE, and locate the mms link under properties, when I right click. If I copy the mms link form IE directly into firefox, it will work. There ought to be a better way to do this. Also, I am using a hardware firewall, not a software firewall, and no proxy.

You need to use the file:// protocol, but you may still encounter problems if you fix that.
See http://kb.mozillazine.org/Links_to_local_pages_do_not_work

Variable works in Dev but not in Test in Webi report

Hi All,
I have written a variable to calculate Average. It works fine for all entries in Dev. But when I transport it to Test Environment, it works fine for some entries and does not work for some entries.
Any suggestions?
This is happening in WEBI Report.
Regards
Edited by: No.One on Sep 21, 2011 2:45 PM

Hi,
Compare the formula of the variable in Dev and in QA. Might be some operands might bwe missing in QA environment.
Cheers,
Suresh Aluri.

Custom bsp Iviews work in dev but not in qas?

Hi All,
We're using R/3 4.7, ESS 50.4, MSS 60.1.20.
We have developed a number of custom bsp iviews that work perfectly fine in dev but when we transported to qas, no data is displayed. The labels in the bsp are being displayed so we know that the bsp is working.
We use epcf to listen for the employee number in the bsp's. It is configured the same in both dev and qas but in qas the bsp is not picking up the employee number and therefore is displaying no data. When you click on susbequest employees in the team viewer, nothing happens (bsp should reload).
The only difference is that the portal dev and the bsp's reside on the same server but when we go to portal qas, it is now on a different server to the bsp. We have relaxed the domain, so that the server name has been removed from the domain name but still to no avail.
If anyone can help at all, i'd really appreciate it, as i'm at a loss as to what to do next.
Many thanks,
Liz.

Hi,
Seems that there is:
1. something wrong with the System Object or it's definition..
OR
2. someone used a server/hostname as a "constant" instead of a "variable"
OR
3. the Portal and Backend are not in the same domain or the configuration is not with Fully Qualified Domain Name
Hope this helps you to narrow it down or even find the issue.
Good Luck,
Benjamin Houttuin

Web template works in Dev but not in Q

We have a web template includes 10 queries. First I transported 10 queries from Dev to Q and we executed each one. All worked. Then I transported this template. Transport was successful but it return a error message when it gets execute for few seconds.
One thing I don't understand is it contains many Template items but it only show part of Items when I collected. Now I am trying to collect each template items but I am unable to find missing items from Bex Web Items list. Why is that?
Here is the error message:
The initial exception that caused the request to fail was:
Termination message sent
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
com.sap.ip.bi.base.application.exceptions.AbortMessageRuntimeException: Termination message sent
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessageInternal(MessageManager.java:148)
at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessage(MessageManager.java:113)
Details: Full Exception Chain
Messages
ABEND: Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
ABEND: System error in program SAPLRZI0 and form RSZ_FORM_AND_VAR_TAB_FILL-02- (see long text)
Can anyone help? Thank you in advance!

Hi,
You have to collect all the WEB items toos, it should be under the WEB ITEM in transport connection. Try collecting them again . Hope you have transported all the dependant Query elements like variables, User exits variable code if any.
Hope it helps,
Cheers,
Balaji

Case insensitive search working in dev but not in prod

Hello All,
I had set the CASE_SENSITIVE_CHARACTER_COMPARISON parameter as OFF in NQSConfig.ini file for enabling the case insensitive search in OBIEE.
This setup is letting me do the case insensitive search in Dev env but the same doesnt work in prod env. I tried pointing both prod and dev rpd to same prod db.
With same db also, case insensitive search doesnt work in prod env.
Any idea for which other configuration I can look for.
Thanks in advance.

Thanks Stijin. I had seen this post earlier. Case insensitive search works fine after setting the value for NLS_SORT and NLS_COMP in production RPD but the other report with distinct clause starts failing. Not sure about the reason.
Saw this comment from you in that post:
The only compromise solution we could find was to "cache" the column value we wanted to use in insensitive searches. These were mainly used in "show all choices" while setting prompts. Other than that there isn't much you can do in an Oracle database.
Can you please tell me how to implement the above.

CFDocument: works in dev but not prod?

We are using CFMX 7,0,2,142559 Standard on W2K3 servers. In
our dev and qa environements, cfdocument works fine, but in
production it does not, and produces the error below in the errror
log.
The code is all the same, the data is the same - I have
sinked our dev and qa servers with the production data. I have even
put out a test file in all environments containing the following:
<cfdocument format="pdf">
Dave's content
</cfdocument>
It Streams to the browser just fine in dev and qa, but in
production the browser times out, and the error below is produced.
Anyone else see this?
Thanks in advance.
~~~~~~~~~~~~~~~
"Error","jrpp-58","07/09/06","15:31:55","Corporate","The
document has no pages. The specific sequence of files included or
processed is:
E:\sites\corp\docs\pressroom\press_releases\pr_in_pdf.html, line:
23 "
java.io.IOException: The document has no pages.
at com.lowagie.text.pdf.PdfPages.writePageTree(Unknown
Source)
at com.lowagie.text.pdf.PdfWriter.close(Unknown Source)
at com.lowagie.text.pdf.PdfDocument.close(Unknown Source)
at com.lowagie.text.Document.close(Unknown Source)
at
coldfusion.tagext.lang.DocumentTag.doAfterBody(DocumentTag.java:1225)
at
cfpr_in_pdf2ehtml894705829.runPage(E:\sites\corp\docs\pressroom\press_releases\pr_in_pdf. html:23)
at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:152)
at
coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:349)
at
coldfusion.filter.CfincludeFilter.invoke(CfincludeFilter.java:65)
at
coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:225)
at
coldfusion.filter.RequestMonitorFilter.invoke(RequestMonitorFilter.java:51)
at coldfusion.filter.PathFilter.invoke(PathFilter.java:86)
at
coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:69)
at
coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8)
at
coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)
at
coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)
at
coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
at
coldfusion.filter.RequestThrottleFilter.invoke(RequestThrottleFilter.java:115)
at coldfusion.CfmServlet.service(CfmServlet.java:107)
at
coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:78)
at
jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:91)
at
jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at
jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:257)
at
jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:541)
at
jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:204)
at
jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:318)
at
jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:426)
at
jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:264)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)

Hi,
Compare the formula of the variable in Dev and in QA. Might be some operands might bwe missing in QA environment.
Cheers,
Suresh Aluri.

Works on dev, but not production server

I am building a site using LCCS which works on my laptop, which runs ColdFusion 9 and Apache. But it does not work on my production server, which is ColdFusion 8 and IIS. I have made the various configuration changes and I can successfully create a room via CF from the production server.
But my Flex app does not seem to load properly on the production server. It is basically a video-conferencing app, so the swf should display the "Start My Camera" button, but it doesn't. It works perfectly on my laptop though.
I realize I am using very different environments, but I don't know why that would affect anything for the simple Flex-generated swf, especially when I am dynamically creating the room via production.
I am sure it is something simple, but am out of ideas. Any suggestions would be greatly appreciated.
cheers,
Steven

It seems I figured out my problem (well, about this issue anyway).
A while back, I un-installed .NET but then had to re-install it. In doing so, somehow IIS lost the ability to recognize .js files. It would return a 404 error whenever you tried to call any file with a .js extension. My hosting company did something to re-associate the file type with IIS. It seems I have the same problem with .swf files.
fyi, I used Charles (a Firefox plugin) to diagnose this. I had assumed it was a permission issue. It never occurred to me to try to access my swf directly.

Webi report on OLAP Bex query - Cost element Hierarchy not working Drill down

Hello,
We have a BO report on Bex query, Not on universe, we have a Hierarchy for Cost Element Group, and we are expecting the Drill down functionality for that in BO report, but it does not.
Webi report on OLAP Bex query - Cost element Hierarchy not working Drill down
Any pointers how to do it please
Thanks
Krishna

Hi,
WebI reports on BEx source don't use same Drill feature as other sources, it's replaced by expland/collapse of hierarchy nodes (documented in WebI user guide in § "24.1 Drill defined"). This means you have to create query which selects all hierarchy sub-tree you plan on exploring later in report, otherwise if no data is available under a node there will be no '+/-' sign to visit this part of tree.
You could try first to select "All members" from hierarchy in QueryPanel and see if behavior in report suits your needs. Then you should restrict hierarchy member selection to what's really needed to avoid performance issues.
Regards,
Loic

Can create Webi report using multiple universe (multiple datasource)

Hi All,
Can we create a Webi report from multiple universe (can say multiple dataprovider & datasource)?
Please suggest.
Regards,

You can bring as many sources together into one report as you like.
However, to use them together you must have some common dimension, such as a particular Sold To Party, Business Partner, etc. You can then use merge dimensions to develop your report but you will need to be aware that dimensions that are NOT Common to both data providers cannot be used in a table combining two data providers.
So, if data provider one has dimensions Resort, Product and Year and a measure object Sales Value
while data provider one has dimensions Resort and Year and a measure object Cost Value, you cannot use Product in a report but you can display Resort, Year, Sales Value and Cost Value together to show you how much revenue each resort is generating each year and how much it is costing you to do so. To have product in the report table, you would need to add it to data provider two.
Hope that clears it up for you.
Regards,
Mark

Madison Square Garden web site opens but when I click on view all concerts tab at the MSG site it does not open. It works with AOL but not Firefox

I go to '''www.thegarden.com''' I click on the tab '''View Full Calendar'''. It does not open. It works on AOL but not Firefox. And for some reason it also does not work when I use Internet Explorer. The majority of times when I click on that tab (in Firefox) it does not work. On a rare occasion it will open. I am not doing anything differently either time.
Any help would be greatly appreciated.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

How to send active links in email from firefox. Works in IE but not Firefox... Is there a setting to change?

how to send active links in email from firefox. Works in IE but not Firefox... Is there a setting to change?
== This happened ==
Every time Firefox opened
== Always

Check with your web mail service provider for help with that issue.

Spry menubar works in IE, but not Firefox

I added a very simple Spry horizontal menubar to the top of all pages in my web (I'm using DWCS4 and Spry 1.6). When I preview it in Firefox locally, it seems to work, but when it is uploaded to the web server it works in IE, but not in Firefox. Instead of a menubar, I see a stack of bulleted hyperlinks. In IE, it displays properly.
Website is http://www.stevegoldman.com.
How can I fix this problem so that it works with all browsers properly?
-- Martin

I just tested your site with firefox (latest version) and it works just fine. I also tested it in IE: 7.0 and it worked fine for that too. Looks like you have either fixed the problem or you have a different version of firefox than me or something.
Favorite qoute: "do unto other as you would do unto yourself"
Favorite hobby: airsoft / electric aeg airsoft guns
Airsoft Sniper Rifles

In KSB1 one of the field is showing up in DEV but not in QA or PRD

Hello,
One of the standard field which is showing up in DEV but not in QA or PRD. After excuting a transaction KSB1, One can change the layout and add or hide a field from a given options. We can see that field in DEV, but not in QA and PRD. This is a standard report and we checked in table v_tkalv, it is same in DEV and QA
Thanks for your help
Rick

I don't have access to a 6.0 system at the minute, but I'm pretty sure order isn't a standard field in KSB1. It would be in KOB1, of course, but the K*B1 transactions are for displaying actual line items recorded on various kinds of cost objects.
In the reporting scenario, how's the order factor in? Did it receive statistical postings, or something?

Webi Report on BW Universe works in DEV but not properly in TEST

Similar Messages

Maybe you are looking for