Webi Report scheduling issue

Dear Experts,
I have webi reports which are running fine when i refresh the query from query panel. When i am scheduling the report it is failing.
My webi reports are connected to the Bex Queries using OLAP Connections which is working fine for other reports.
I am getting the following error message
"Can not connect to the source olap com.sap.conn.jco.JCoException: (103) JCO_ERROR_LOGON_FAILURE: Access key access is no longer possible"
Because of this BW Credentials are getting locked and user cannot able to access the BW System.
Kindly help us getting this issue solved.
Thanks in advance.
THanks & Regards,
Archit Sarwal

Hi Archit,
Try this...
Logon to Central Management Console (CMC) with an Administrator user.
Click on OLAP Connections.
Right click on the connection and click User Security.
Assign Full Control to the User on the connection.

Similar Messages

Webi Report Schedule failing in BI Launchpad

Hi,
I am wondering if anyone has come across this error message when trying to schedule a webi report in BI Launchpad.
Firstly, the webi report refreshes successfully in BI Launchpad. The source for the Webi report is an OLAP universe that was migrated from a 3.1 environment into BI 4.0.
The error message occurring when scheduling is:
'while trying to invoke the method org.eclipse.emf.ecore.EObject.eClass() of an object loaded from local variable 'eObject' '
I haven't been able to find any documentation on this error message on a failed scheduled.
If anyone has an idea what might be causing this I would appreciate the help.
Many thanks,
Ainsley

Hi,
- Does your souce BEx have SAP Variables coming through to the OLAP universe as Filters?
- Does your WebI document's dataprovider have filters defined as Prompts in the query panel ?
- or, I wonder if 'local variable' may refer to a report-level variable ? i doubt it. i imaging it's the SAP VAR.
I know that these 2 types of prompts have been troublesome on occasions with scheduling.
Please check Note 1602665 - SAP BusinessObjects 4.0 SP02 Patch 2.6 Release Notes
and refer to the fixed issues .pdf attached
there are a number 3 / 4 corrections for scheduling webi with prompts ontop of bw
Regards,
H

Webi Reports - Performance Issues

Hi Experts,
       Right now we are using BO XI R2 version. We have 2 servers, server 1 is old and server 2 is new (AIX server u2013 new upgrade of old server).
      When I trying to schedule the report (webi) in both server, reports is running successfully. But problem is that the report scheduling time is more in new server (AIX) than old server (Server1).
There is some performance issues
Example:
Old serve     : 1 hrs (time taken)
New server : 2 hrs (time taken)
Could you please tell me how to increase the webi report performance in new server?
Regards,
Sridharan Krishnan

Hi,
How to enable Excel and Pdf option under Save as file in infoview.
When i trying to click modify option under public folder reports ,Report is getting open but i am not able to save that report as excel or pdf , since those option is disabled in infoview.
But it is enabled in user private folder Reports.
Right now we have upgraded the objects from XI R2 to BO 3.1, Since there is some difference in security rights in 3.1, Please tell me how to fix it.
BO Version u2013 3.1
Regards,
Sridharan

SAP BusinessObject Mobile WebI Report Prompt Issue

Hi,
I have problem to view the Prompt value in Long Text for WebI report in my iPad. The SAP BusinessObject Mobile application is on version 5.1.12.
We are using BI Platform 4.1, and the WebI report is connected to Bex Query using BICS connection.
Below are the settings that I had done:
Setting of Characteristic in BW:
Setting of Characteristic – ZBPARTNER in BEx Query Designer:
Below are the report Prompt result in BI LaunchPad and BI Mobile:
Example data:
Business Partner ID 123 has description in Long Text (DO NOT USE - KOC ALLIANZ SIGORTA A.S) and Short Text (DO NOT USE - KOC).
Business Partner (on top of ZBPARTNER) in WebI is showing Long Text as expected.
For example, you can see the long text "DO NOT USE - KOC ALLIANZ SIGORTA A.S".
Business Partner (on top of ZBPARTNER) in Mobile Apps is showing Short Text:
For example, you can see the long text "DO NOT USE - KOC".
I need the Prompt value is the BusinessObject Mobile to be display with Long Text, but I cannot find any configuration to achieve this.
Is anyone encounter similar issue and can provide me some suggestion?
Thank you in advance.
Regards,
Edison Wang

Hi,
Just like to follow up whether is there anyone encounter similar issue like above which can give me some advise?
Thank you.
Regards,
Edison Wang

Webi Report Performance issue as compared with backaend SAP BW as

Hi
We are having Backend as SAP BW.
Dashboard and Webi reports are created with Backend SAP BW.
i.e thru Universe on top of Bex query and then webi report and then dashboard thru live office.
My point is that when we have created webi reprts with date range as parameter(sometimes as mandatory variable which comes as prompt in webi) or sometimes taking L 01 Calender date from Bex and creating a prompt in webi, we are facing that reports are taking lot of time to open. 5 minutes 10 minutes and sometimes 22 minutes to open.
This type of problem never ocurred when Backened was Oracle.
Also when drilling in webi report,it takes lot of time .
So can you suggest any solution?

Hi Gaurav,
We logged this issue with support already, it is acknowledged.
What happens is that whenever you use an infoobject in the condition
(so pull in the object into condition and build a condition there,
or use that object in a filter object in the universe and then use the filter)
this will result in that object being added to the result set.
Since the query will retrieve a lot of different calendar days for the period you selected,
the resultset will be VERY big and performance virtually non-existent.
The workaround we used is to use a BEX variable for all date based selections.
One optional range variable makes it possible to build various types of selections
(less (with a very early startdate), greater (with a very far in the future enddate) and between).
Because the range selection is now handled by BEX, the calendar day will not be part of the selection...
Good luck!
Marianne

Webi Report Scheduling

Hi All,
I want to know when we schedule a Webi report, which server is affected (mean Webi Processing server,Adaptives server).
Please advise..
Regards,

Hi Manoj,
When you Schedule a web Intelligence e Report, Adaptive Job Server will be responsible to do the task.
If you go to Report History  you can see the Instance Status and you can find out the Job server Used for that particular instance by clicking on the Status.
Thanks & Best Regards,
-JS

WEBI Report Scheduling based on event.

Hello All,
We have a requirement to schedule a webi report based on event generated by ETL loads.
Scheduling works fine based on events.My requirement is If event is not generated we want to schedule the report at specific time.Lets assume event will generate between 10 Am to 11 Am.If event is not generated report will not schedule,but we want schedule report after 11 Am.
Please let us know if any one have solution for the above
Thanks,
Kumar

You can schedule your report based on the file event to look for the trigger file till 11 AM. If the file not generated, you can use the below VB Script to generate the file in the desired location by 11 AM.
Private Sub writeDebug(ByVal x As String)
    Dim path As String = System.Environment.GetFolderPath(Environment.SpecialFolder.MyDocuments)
    Dim FILE_NAME As String = path & "\mydebug.txt"
    MsgBox(FILE_NAME)
    If System.IO.File.Exists(FILE_NAME) = False Then
        System.IO.File.Create(FILE_NAME).Dispose()
    End If
    Dim objWriter As New System.IO.StreamWriter(FILE_NAME, True)
    objWriter.WriteLine(x)
    objWriter.Close()
End Sub
Script does the below operations:
It will verify if the file already exist for the day.
If it does not exist, it will overwrite the old file with the new one. If already exist, the script will end.
Script contains "Debug" function which will be helpful for your analysis.
Add this program to your scheduler to run everyday at 11 AM.

Filter condition for Webi report scheduling

Hello,
I have a Webi report with a query that has one filter (it states the starting and ending date of data to be displayed in the report). This report has to be scheduled but it has to contain different filter values each time the report is run.
I'd like to know if there is a way to schedule this report taking into account that each iteration of the scheduling process has to use different values for the filter.
On the same way, the Webi report has a XY diagram with a text title made up of a fixed literal label. Is there any way to inject the text title from the scheduling process (in order to avoid editing the report before each scheduling iteration occurs)?
Thanks a lot!

Victor,
one filter (it states the starting and ending date of data to be displayed in the report). This report has to be scheduled but it has to contain different filter values each time
There are a couple of ways to handle this requirement, depending upon other environmental factors. Here is one method, but it requires the ability to update/change data at the database using an external tool (anything that permits processing transactional information).
You can set up an additional table with two columns: starting_date and ending_date
Someone updates the additional table as appropriate before the next run will kick off in the schedule.
The tricky part is in getting your current report to incorporate the other table, and for this you may need to either create a view in your database or a derived table in your universe. Here is the rudimentary SQL structure that might work for you:
create table start_end_dates (beginning_date datetime,end_date datetime)
go
insert into start_end_dates values ('9/1/2009','9/30/2009')
go
create table my_data (col_a char(1),month_id datetime)
go
insert into my_data values ('a','9/1/2009')
insert into my_data values ('a','10/1/2009')
go
select *
from my_data
where month_id >= (select beginning_date from start_end_dates) and
month_id <= (select end_date from start_end_dates)
The start_end_dates table is the one that receives a single input, populated with the starting and ending date of data. The "my_data" table is an example of how the source table can call in the "parameters" of the "start_end_dates" table to fulfill its quest for filtering (additional filtering on other things within your scenario can also be applied).
Once you can get the mechanics of the SQL to work for you (either in the universe or a view), then you can set the report up to work hand-in-glove with the above structure. In the report, you can either have a second data provider that selects on the "start_end_dates" table, storing that data in the report and displaying it somewhere, or you could use the min(month_id) and max(month_id) concepts and display that somewhere too.
Thanks,
John

Webi Reports- Barcode issues

Hi All,
I have a simple webi report that will shows the bc39 barcode fonts. When the report is in HTML mode they see the barcode numbers. When they need to print they have to view in PDF mode, this is when the numbers are seen as a Barcode.
But quiet frequently in PDF mode users are unable to view the Barcode and system is showing only codes.
I would be greteful if you could please let me know how i can fix this issue.
Many Thanks
Madhu

Hi,
How to enable Excel and Pdf option under Save as file in infoview.
When i trying to click modify option under public folder reports ,Report is getting open but i am not able to save that report as excel or pdf , since those option is disabled in infoview.
But it is enabled in user private folder Reports.
Right now we have upgraded the objects from XI R2 to BO 3.1, Since there is some difference in security rights in 3.1, Please tell me how to fix it.
BO Version u2013 3.1
Regards,
Sridharan

Webi/Report : Schedule : Destination configuration

In the Report : Schedule : Destination of Webi, is it possible to disable the "Use the Job Server's defaults" check box in ?

Oh, I am not sure if you can simply change an config file to achieve this. We had to modify the JSP code behing the schedule page to make the tweaks. But I could be wrong and there might be an easier way to do it that I don't know of.
If at all you want to play around with the JSP code, I think you might want to look at the file -
desktoplaunch\InfoView\schedule\destination_include.jsp
Cheers,
Sarang

Server Side Trust and Webi Report Scheduling via Portal

Hello,
I have opened a similar thread about Server Side Trust and webintelligence reporting through the portal a few months ago.
At the time, we had some complaints about users that were getting SSO errors after 8 hours when scheduling WeBi Report through the SAP Portal.
Basically, the users connect to the Portal and then FROM the Portal, to a BOI view pointing to the Infoview.
Then, after investigatinon, it was my understanding that the WebI Reports should be scheduled through an Infoview token and not a portal token. In concrete terms Server Side Trust had to be implemented between the SAP BW Backend and the BOE 3.1 Server.
And after that the users who wanted to schedule WebI reports should connect to the Infoview directly (using their SAP BW credentials) to generate an Infoview Token.
Scheduling Webi reports from the Portal will not be solved by implementing Server Side Trust, since it is only a matter of time before the the Portal token expires ( 8 hour by default).
Now, I have configured the server side Trust between our BOE 3.1 SP2 and our BW 701 system, SNC configuration, PSE generation, exchange of certificats , etc ...
I did some scheduling tests connecting directly to the BO Infoview and it works.
But of course, now I am being told by the users that this solution is not acceptable.
The Portal being the entry point of our Infrastructure, they don't want to connect to the Infoview to schedule their reports.
So I opened a SAP customer call to try to have an official and clear statement from SAP but I never obtained it.
I had a look at my SAP BO courses but I am still confused
For example according to SAP BO100 , server side trust should be implemented when ;
"BOE client session authenticated using Single sign on using SAP token
(Enterprise Portal) and SAP reports are being scheduled at a future point in
time (after token expiry date)."
Anyone can help me to clear my mind ?
Thank you
Best Regards

Hi,
first of all lets separate the UI portion from the technical portion.
on the technical side:
yes for scheduling the Web Intelligence document you will need Server side trust
on the UI side:
- scheduling is part of InfoView
- scheduling is part of the KM integration with the portal
if that is not accepted from a UI point of view from the user you can create your own application to schedule documents using the SDK.
ingo

Webi report scheduling error

Hi All,
When I am refreshing Webi report, getting error:
Invalid Prompt definition. See your Business Objects administrator. (Error: WIS 00005)
Please help.
Regards,

Hi,
Please search the Knowledge Base for Articles before posting. www.service.sap.com/xsearch
You need to look at :
Note 1404402 - Expanding an WebI LOV prompt, using SAP BW Hierarchy node, fails with errors. (FixPack2.5)
Note 1569069 - Invalid prompt definition
Regards,
H

Webi report sum issues

Hi All,
I have a webi report with the fields as below and at the bottom of the report, I am trying to sum the amount it gives me multivalue or double the number.
Status
Amount
ID NUmber
Description
Station
A
3,037.44
578
Light
X157
E
3,899.68
579
Light
X157
Sum of Amount
#MULTIVALUE
For sum of amount I am using formula as: =(If([Status Id]="E" ;Sum([Payment Amount]);0)) this gives a multivalue error. If I use formula as :
=Sum(If([Status Id]="E" ;Sum([Payment Amount]);0)); this gives number as 69,371.2. I am expecting to see 3899.68 since that is the number for Status=E.
If I use =Max(If([Status Id]="E" ;Sum([Payment Amount]);0)) it gives the number as 6937.12 which is sum of both the 3037.44 and 3899.68, which is incorrect.
Please help where I am going wrong.
Thanks,
Nisha

Thanks for your quick response.
I am using merge dimensions. I am merging ID Number and station. Query 1 I have all the fields, query 2 I have ID number, Station and Amount. So I am merging the 2 fields.

CUIC 9.1.1 Report scheduling issue - getting data only for current date

Hi,
CUIC : 9.1.1
ICM: 9.0.3
Description:We have CUIC publisher and Subscriber deployed in Cisco UCS C series server. When we schedule a report in Subscriber, we are getting data of current date even we schedule for old dates. Eg. If I schedule a report for yesterday, getting output as today's data. This is applicable for all the historical reports.
There is no such issue in Publisher.
Regards,
Alag

Try this...
{TableName.DateField} < DateAdd("d", -2, CurrentDate)
HTH,
Jason

WebI reports Scheduling using ASG Zena Schedular(third party tool)

I have 90 Web Intelligence reports developed i need to Schedule them using a third party tool ASG Zena, if any body has any Idea or already done this activity please respond ASAP.
Thank you in advance.
Regards,
Saradhi
9949293952

There is no command line interface for scheduling reports, so you're going to have write a program to do the actual scheduling. I recommend this program up so that you can pass in the report ID or name and the parameters. That way you can use one program to schedule all reports. Your scheduling system would then run a .bat file that contains the specific information for the report being scheduled.
-Dell

Webi Report scheduling issue

Similar Messages

Maybe you are looking for