Webi report takes long time to open

Hi All.
We have created few reports in webi and we have used variables in these reports.
But while opening that reports into BI Launch pad browser, it is taking long time to open. e.g. 5 to 7 min or more.
Please help to resolve this issue.

Hi Anand R,
A couple of questions from my side:
1) Does the webi report contains any chart
2) Are webi reports which are slow only on a single .UNX
3) How about the network.
4) Are you using IE
5) Are you in 3.x or 4.x
Could you try any of the below:
1) Increase Tomcat memory pool to 4096Mb
2) Stop and restart Tomcat once.
3) Try with other browser
4) Use something like Fiddler to understand the network speed
5) Delete cookies in the browser
Try the other options told by our SCN colleagues aswell..
BR
Prabhith

Similar Messages

  • Oracle9i reports take longer time while running in web

    Hi,
    I have developed few reports in Oracle9i and I am trying to run the reports in web. Running a report through report builder takes lesser time compare to running the same report in web using web.show_document. This also depends on the file size. If my report file size(.jsp file) is less than 100KB then it takes 1 minute to show the parameter form and another 1 minute to show the report output. If my file size is around 190KB then the system takes atleast 15 minutes to show the parameter form. Another 10 to 15 minutes to show the report output. I don't understand why the system takes long time to show the parameter form.
    I have a similar problem while opening the file in reports builder also. If my file size is more than 150KB then it takes more than 15 minutes to open the file.
    Could anyone please help me on this.
    Thanks, Radha

    This problem exists only with .jsp reports. I saved the reports in .rdf format and they run faster on web now. Opening a .jsp report takes longer time(file with 600KB takes atleast 2 hours) but the same report in .rdf format takes few seconds to get opened in reports builder.

  • Hyperion Financial reports-taking long time to open after migrating to 9

    Hi,
    Financial reports version 7 are migrated to system 9.
    Problem that we are facing now is that reports take ling time to open.
    Can anyone suggest how to improve the performance .
    before migration to system 9 financial reports was working fine but now it is taking a long time to open

    Are they taking a long time to open in the studio or in the workspace?
    There could be lots of reasons:
    Have there been server changes with the migration?
    Have there been any changes in dynamically calculated dimensions?

  • Photo both takes long time to open, what can i do?

    photo both takes long time to open, what can i do?

    SO do you think we can get a aunser? i just bout my imac u know!!

  • Payables Account Analysis report takes long time to produce xml output

    Hi,
    I am trying to get xml data for the Payables Account Analysis report. I have changed the output format of the concurrent program to XML.
    The report takes long time to produce the xml data irrespective of the number of rows fetched. But the same report with Text output runs very fast.
    Any reason why the xml output takes long time?
    thanks in advance
    Malathi.

    Hi,
    Thanks for the reply.
    As mentioned above, i deleted the Q_FLEXDATA and ran the report. it takes less time.
    But Will the report data not affected when we delete Q_FLEXDATA Group? and Why this flexdata group affects the running time?
    Thanks,
    Malathi.

  • Concurrent report takes long time to complete

    Dear all,
    Concurrent report "Inactive items report" takes long time to complete.
    How to solve this performance issue ?
    Kindly offer me solution to this.
    Regards,
    Arun

    Please post the details of the application release, database version and OS.
    Was the performance acceptable before? If yes, any changes been done recently?
    Do you have the statistics collected up to date?
    Please enable trace and generate the TKPROF to determine why the request takes that long to complete.
    https://forums.oracle.com/forums/search.jspa?threadID=&q=Slow+AND+Concurrent&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    https://forums.oracle.com/forums/search.jspa?threadID=&q=Slow+AND+Concurrent+AND+TKPROF&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

  • One Form 10g takes long time to open

    We have created one form using Object Library and all objects are inherited.
    It takes long time to open as compared to other forms which are inherited from Object Library.
    Anybody having any idea. It would be great if somebody can provide some help

    This form contains 3 tabs and one tab is completely inherited from Object Library (the whole block, items etc). I have tried to remove this inherited tab then it works better. So i think its definitely something to do with object library.
    Thanks alot.

  • Report takes long time for few records

    hi frends,
    I m facing one problem with my Web based erp application which is developed in .net , in my application when i open the  report from my applicaiton , in my temp folder there one file gets created name is "rpt conmgr cache"
    bcoz of this for few records also my report takes too much time and opens very slow and it takes long time, and it happens in some of the reports only , other reports are working cool and its not creating any file in temp folder,,, so can u guide me whats this file and what can be the solution for it,
    Thanks
    Mithun

    hi sabhajit,
    i have already checked the sql query it is taking less then seconds.
    any other steps u want me to check then pls let me know?
    thanks mithun

  • Report takes  long time to refresh

    Hi Experts ,
    I have an issue ,when I have only used one workshet  to upload as the original workbook has about 25 worksheet tabs and is too large to upload.The report takes 20 minutes to refresh I was rebuilding the report when I noticed that when I added the formulas to the bottom to the original report the report started to take longer to run.When the bottom section of the report is not included the report refreshed in about  2 minutes.
    In the file that completes faster,there are no formulas after line 353
    In the file that takes long time o refresh,the start on line 357.When the bottom section of the report is not included the report refreshed in about 2 minutes.Any sugession.Thanku.
    Regards
    R@vi

    hi,
    If you discover significant high frontend time, check whether the formatting is the reason. If so, either switch it off or reduce the result lines.
    As formatting information is not transferred, the time consumed in the frontend can be reduced.
    But the workbook you are executing may obviously take much time.
    Message was edited by: AVR - Intelli

  • My mac shutdown suddenly fr0m time to other and take long time to open

    hi everybody,
    I think i have big problem ,i have macbookpro I5 13" early 2011  , i just changed the board to I7 ( used  board got it from net ) after USB ports in my original logicboard are damaged due to drop  , after changing the board the mac is unstable, it take long time(half hour!) to show up anything after press power,  yes I press power and there are no response  from the mac (black monitor as its ) , just   i hear  a noise from the empty CD drive . once it open it work fine for a while (may 2 hours or more ) and then shutdown suddenly! and you have wait more than half hour to open it again if im lucky.
    Itried to rest the mac many times, replace the RAM places , i thought may the problem come from overheating the CPU, i monitored the CPU tempreture just before the suddenly shutdown was 57C
    please help ,any suggetions ?

    Run an Apple hardware Test:
    support.apple.com/kb/ht1509http://
    You may have to use OPTION D to start it.
    See what that picks up. 
    You may also bring the MBP to an Apple store or AASP for a diagnostic evaluation.
    Ciao.

  • Applicatio​n front panel takes long time to open

    I have an application that will open quickly on one computer and takes a long time on another.  What is happening is the icon is displayed in the task bar but the front panel will not open for some period of time.  Both computers are running Windows 7 and the application was built in LV 2010.  The applications main purpose is capturing images from a USB camera. The communications to the camera is done using .NET components that were developed by the manufacturer of the camera.
    I was hoping somebody could give some ideas on where to start troubleshooting?
    Terry
    Solved!
    Go to Solution.

    I've had this exact issue on a computer that couldn't access the network. 
    It is because .NET is trying to access the network. Can you run this application on a computer connected to internet ? I believe you have to uncheck some options
    Control Panel --> Internet options --> Advanced
    I believe the three I unchecked were: "Check for Publisher's certificate revocation", "Enable Integrated Windows Authentication", and "Check for Server certificate revocation". I am not sure about the exact 3 I unchecked, but give it a try. Good luck !
    Kudos always welcome for helpful posts

  • Existing Quality Notification takes long time to open for certain vendors

    Hello Gurus,
    I have users complaining about the wait time( 2 t0 5 mintues) when opening of an Quality notification in QM03 for certain vendors. For soem vendors its fast and they always fast but for some it takes really long time and it always long.
    I tried the sql trace but nothin out of ordinary compare to the ones both kind slow and fast.
    Any help or idea would be really appreciated1
    Regards,
    Khan

    Dear Khan
    I think you need refer this to SAP itself. This is more of some program error than your execution. Please check this note if it can help you
    Note 1324998 - IQS9: Performance for general selection
    Regards
    Gajesh

  • RDS 2012 R2 take long time while opening first application

    Hello experts:
    My RDS Environment Have the following servers:
    1- Two web access server ( RR DNS )---> virtual machines
    2- Two Connection brokers servers (RR DNS) ---> Virtual machines
    3- Two host session servers combined as a farm ---> Physical machines with 128 GB of RAM for each server
    4- There is no gateway server.
    5- The Active Directory is 2008 R2 while the RDS is 2012 R2
    My problem is when the users try to access published application they faced a long time ( around 1 min ) to open the first app, the subsequent app open quickly, the problem on when launch the first app.
    I tried the following in order to solve the problem with no luck:
    - Edit the registry and add DisableTaskOffload with value =1.
    - Disable the large send offload v2 IPv4 on all NIC's.
    so the problem still exist and i didn't found any solution for it, any help or suggestion will highly appreciated.

    Hiya,
    I'm afraid I don't have a environment to build the exact script on, however I would think the below script should be able to help you:
    http://jesperarnecke.wordpress.com/2013/07/24/sharepoint-2010-mysite-preferred-search-center-setting-powershell/
    The above script really just opens an IE and navigates to the specified page. Finds the different required elements on the page(View Source to find) and manipulates them as required. ().Click etc.
    You properly need to add a Username and Password, in order to login, which the script should be able to handle fine. Do consider the risk of storing username/password in cleartext. - Its not necessarily a problem, but it could be if the account needs elevated
    privileges. However in this case it should just be a service user with 1 app to start :)
    Let me know if it helps you :)

  • When I need to open a folder on the desktop takes long time to open, so it is with the hard drive?, I'm using Maverick

    The system boots without any problem, applications without a problem when I'm on the desktop and I need to open folders taking forever to open and for a moment I open and blocks other thing that the colored circle appears, use ten folders on the desktop where I'm keeping this information and take process and lock the desktop makes my job a little slow, and does anyone know anything about all of this as repairing system error?

    Have then select one of the photos and type Command+i. In the Info window that comes up check to see which application is set as the default application. If it's iPhoto therein lies the problem. Regardless of what is set for the default select Preview and click on the Apply to All... button. See if that will fix the problem.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

  • Bex Reports takes long time for filtering

    Hi,
    We have gone live in last December.And already our inventory cube contains some 15 million records,sales cube contains 12 million records.
    Is there any specific limit to number of records.Because while doing filtering in inventory report or sales reports it is taking very  long time.
    Is there any alternative or we should delete some the data from the cube.
    for filtering any value it is taking long time than running the query itself.
    Pls help...
    Regards,
    viren.

    Hi Viren,
    I hope a cube can perform well even at 100 million records with some performance tunning. So i absolutely doubt why it is taking long time for your cube with just 10-15 million records.
    Do a performance analysis and check whether aggregates will be helpful or not.
    Check the below link for how to do a performance analysis.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/d9fd84ad-0701-0010-d9a5-ba726caa585d
    Hope it helps.
    Thx,
    Soumya

Maybe you are looking for

  • I can't start halo for mac

    Hi, I having some problems with halo for mac. I have a intel duel core mac with windows installed. I have been playing halo for some time now, but about 3 weeks ago I quit for a week. In this time I installed America's Army (the game developed by the

  • Group by Query not giving desired results

    Hi, I've a requirement to find minimum month based on status: The following query is giving error : SELECT           b.app_name,           DECODE (a.status,           'C','Closed',           'O','Open',           'F','Future',           'W','Pending'

  • Firefox freezes when I try to type after reboot of pc and is still frozen now. I am using internet exployer right now.

    firefox freezes when I try to type after reboot of pc and is still frozen now. I am using internet exployer right now. This happens every time I reboot my pc. When I try to type I have to use task manager to close the firefox.

  • Reduce the number of response headers on getting image from storage

    Hello, I would like to know if it's possible to get an image from the storage without all the x-ms-* header, Etag and Content-MD5 I m trying to server images as fast as possible with less overhead possible and the blobs are unique and cannot change.

  • How do I Start/Stop Loadmovie

    I have created an on loadmovie script to replace a blank movie clip in my main movie time line. When a button is released the external .swf file is loaded into the blank movie clip and plays great. I want to be able to control the play back of the lo