WEBI Report values Double as compared to BI/BEX Report.........

Hi,
I am trying a report in BOBJ. When I run the WEBI report it doubles the Column values as compared to BI report. There are no filters, conditions or anything in the report. Tried purging the data and running the report but no change. has anyone come across this situation and if so how did you resolve it? Please let me know.
Thanks...... ShruMaa

Hello Shruti,
as you refer to a Webi problem I recommend to post this query to the [BusinessObjects Web Intelligence|SAP BusinessObjects Web Intelligence; forum.
This forum is dedicated to topics related to the creation and design of Web Intelligence documents using the Web Intelligence Report Panels. This includes areas such as universe connectivity, prompts, charting, formatting, filters, and formulas.
It is monitored by qualified technicians and you will get a faster response there.
Also, all Webi queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk

Similar Messages

  • Webi Report values Double as compared to BEX Report....

    Hi,
    I am trying a report in BOBJ.  When I run the WEBI report it doubles the Column values as compared to BI report.  There are no filters, conditions or anything in the report.  Tried purging the data and running the report but no change.  has anyone come across this situation and if so how did you resolve it?  Please let me know.
    Thanks...... ShruMaa

    Hello Shruti,
    as you refer to a Webi problem I recommend to post this query to the [BusinessObjects Web Intelligence|SAP BusinessObjects Web Intelligence; forum.
    This forum is dedicated to topics related to the creation and design of Web Intelligence documents using the Web Intelligence Report Panels. This includes areas such as universe connectivity, prompts, charting, formatting, filters, and formulas.
    It is monitored by qualified technicians and you will get a faster response there.
    Also, all Webi queries remain in one place and thus can be easily searched in one place.
    Best regards,
    Falk

  • BO Webi report hierarchy with measure values showing more(almost double value) compare to BW Bex report

    Hi,
    In our BO Webi report hierarchy with measure values showing more(almost double value) compare to BW Bex report. Can any one please help on this.
    Is it BW problem or BO problem?
    I checked in some other threads but it's not given solution.
    Thanks,
    Manjunatha

    Hi,
    Is it BW problem or BO problem? : BO
    is it causing problem with hierarchly data only ?  without hierarchies data is matching or not?
    Post same in SAP BusinessObjects Web Intelligence  .
    Thanks.

  • Using a report value for a where clause in other report

    Hi All,
    i'm getting kinda nuts here. I created a page with three reports.
    First report show the name of the user who logged in with his/her whole name. Second report shows the year, week, begin/end date of the week for the user in the first report. The third report show the hours the user worked in the week selected in the second report.
    The link between first and second report is on column report. Somehow i managed it to work with second_report.mdw_code = :P3_ACRONIEM. I have no idea were this P3_ACRONIEM item is coming from, while i have no items in my page whatsoever. Now i need to link the second report to the third report. I have to use the second_report.mdw_code, second_report.year and second_report.week but i have no idea how to link these together. Any idea's? (Like making items, but then i have no idea how to link that item to the value in the second report). Please help.
    Kind regards,
    Dave
    The link between the first and the second i could get it to work with :P3_ACRONIEM. I have no idea where this ITEM is coming from, because i have no items in my page (and it's the only page in the application). Then

    Hi Dave,
    If I understand you correctly, you have a one report that lists users, a second report that lists dates and a final report that shows hours worked?
    If so, you may find it easiest to have hidden fields on your page and base the second and third reports on these using appropriate WHERE clauses. (I generally put hidden fields in a region in the "After Header" position)
    So, if the first report contains a USER_ID field, have a hidden field called P1_USER_ID. The link on the first report will branch back to the same page and set the value of P1_USER_ID to #USER_ID# The second report can then use WHERE USER_ID = :P1_USER_ID. When the page reloads, the second report redisplays and is filtered to show only those records relating to the selected USER_ID in the first report.
    To extend this, if the second report contains WEEK_NUMBER, it should have a link that branches back to the same page and sets a hidden P1_WEEK_NUMBER field with #WEEK_NUMBER#. The third report should when have WHERE WEEK_NUMBER = :P1_WEEK_NUMBER AND USER_ID = :P1_USER_ID. You can, if need be, have and set more than one hidden field during each link.
    Regards
    Andy

  • Using cumulated values for further calculation in a bex report

    Hi ya'll,
    I have a problem with using cumulated values in a bex report.
    the report has three lines:
    Values 1:    100    200  300
    Values 2:    10      5     40
    Values 3:    1000  500  4000
    The values of row 3 is a formula multiplying the values from row 1 and 2... My problem is that the values of row 3 are wrong - for example 200*5 isn't supposed to result in 500 !!
    I figure the reason is that the values of row 1 is a cumulated result, meaning the <i>actual</i> value of the second column of the first row i 100 (and not 200).
    How can I ensure that my formula for row 3 uses the <b>cumulated</b> result from row 1, instead of the underlying result ?.

    Create a column structure with Actual Value columns as well as cumulated value columns. Hide Actual Value Columns from display.
    Example :
    Actual1 | Actual 2 | Actual 3 | *** 1 | *** 2 | *** 3 |
    100 | 100 | 100 | 100 | 200 | 300 |
    You can create a forumla to calculate Value 3 : (Actual 1 * Value 2 ).
    I guess you are using Cell Referencing to achieve this.

  • Local currency showing higher value in BW compared to ERP - Sales report

    Hi,
    My sales report is showing higher value in BW report compared to ERP e.g
    the report is showing 567,01 and in ERP it is showing 566,94.
    is there a way I can resolve this in the query.
    thanks

    Hi  Bhat,
    there may be lot many factors like
    1)comparision between the Two i.e ERP and BIW.Are the Factors same.
    2)Have u  Deltas captured properly.
    3)have u missed any deltas any day.
    4)Any order that has been modified .
    5)hope u have considered ONE days Lag between BIW and ERP.
    6)To what is ur 0Recordmode mapped to.
    7)Is it because of Rounding OFF Values.
    Rgds
    SVU

  • Constant value in one field in the Bex Report

    Hi,
    I want to have a field where the value of it constant irrespective of corresponding  fields values.
    Please suggest and let me know how to do it.
    Regards,
    Prem

    Hi,
    If you have any logic in your mind to populate that extra char or key figure , then you can make use of virtual char & virtual keyfigure .
    Or if you want to just pass any constant value, then in CKF make a formula variable with user entry . What ever user enters in the selection screen that will start appearing in the report output against all the rows.
    Hope the above reply was helpful.
    Kind Regards,
    Ashutosh Singh
    Edited by: Ashutosh Singh on May 12, 2011 8:55 AM

  • Report or Function Moule to delete a BEX Report  ?

    Hi,
    is there a program, report or function module to delet a report ?
    Thank You
    Best Wishes
    Martin

    Hi martin ,
    U can able to delete the query from BEx query designer or from BI.
    IN sap Bex query designer, just by opening the query  menu -->delete query .
    the other way to delete the query is BY using the table RSZDELETE . with that u can able to delete the bex query, CKF, RKF etc..
    plz follow the below link for detail
    http://dev.diditho.net/2010/07/05/sap-bw-copy-delete-query-and-workbook/
    Thanx
    Edited by: Ravichandra.bi on Aug 22, 2011 8:14 PM
    Edited by: Ravichandra.bi on Aug 22, 2011 8:19 PM

  • KF value is not Displayed in BEx Report ..where as cube, mpro end ok..!!

    Hello Experts,
    I ran a bex report. In that report KF some NetsSalesValue has not displayed in the BI Report for all the Sales Organiations where as other KFs has displayed the value for all the Sales Organizations.
    For that i checked my end. BI report is pulling data from Cube --> Multiprovider --> Bex Report.
    I myself checked KF value into Cube level, multiprovider KF level value is avaialable.
    And also i checked, in the query properties is there any filters, RKF, CKF, but...i found the KF is a basic KF.
    And also..i checked the whether the rollup has happened..properly or not and ran the query but no use.
    For your info upto 3 days..back KF value has presented in the report. After that only this issue has encounterred.
    I am in confusion where the exact issue will be.
    If any body faced this kind of scenario is your project, kindly reply me.
    For any more clarifications i will respond you immediately.
    Thanks,
    SN

    Hi,
    check aggregates,index etc for cube
    check key figure selection as well in Multiprovider for respective Infoprovider
    just create test query on Infoprovider and then on Multiprovider and see..
    Check RSRT - regenerate the query
    also see there are various options like execute+debug has ....just check them
    Thanks and regards
    Kiran

  • Best approach to "migrate" from BEX reports to Webi reports ?

    Hello,
    i have read lots of documents regarding best practices on how to built webi reports and universes on top of BW.
    But i can't find any document about best approach, not in performance way of thinking but in best way of using reports.
    i mean: when end users are coming from bex reports (where they can drill down through hierarhies and use free filters ) to webi reports (where layout is quite beatiful and user can change it easely), this is not the same way of consuming reports.
    I come from BO world and are new on reporting on top of BW.
    for me webi is good for quite static layout reporting where data is clear and available.of course you can have prompts for interactivy and more accurate reporting.  Drill down is just a functionality but is not the real purpose of the report tool.
    So ,according to me there is a gap between both tools (BEX and WEBI) but end users are the same.
    So i 'm wondering if you have any feedback for the best approach to build webi reports where end users are coming from bex reporting.
    And how to choose between prompts, drill-down (with available filters on top of the window), fold/unfold and input controls or just having diffrent levels of hierarchies in the table/ section/ breaks but without drill down (because if you drill down, report begins weird with diffrent levels) ...?
    So , if you have any feedback , advise....
    thanks in advance,
    Rgds,

    Hi,
      WEBI don't replace BEX reports, is for different audience, in fact BEX is for OLAP reports and analysis.
      You can find some answer in this page
    [FAQ: The Future of SAP NetWeaver Business Intelligence in the Light of the NetWeaver BI & Business Objects Roadmap|FAQ - The Future of SAP NetWeaver Business Intelligence in the Light of the NetWeaver BI&Business Objects Roadmap [original link is broken]|FAQ]
    spercific for What is the future of the BEx Query Designer? you can read here
    [FAQ - The Future of SAP NetWeaver Business Intelligence in the Light of the NetWeaver BI&Business Objects Roadmap [original link is broken]#section11] and here [FAQ - The Future of SAP NetWeaver Business Intelligence in the Light of the NetWeaver BI&Business Objects Roadmap [original link is broken]#section3]
      The idea is to use the rigth tool for the rigth job.
      You can find more information here [http://www.sdn.sap.com/irj/sdn/edw], [http://www.sap.com/solutions/sapbusinessobjects/index.epx], [http://www.sap.com/solutions/sapbusinessobjects/newsevents/index.epx], [http://www.sap.com/community/flash/BusinessIntelligenceAGuideforMidsizeCompanies.pdf]
    I hope this help you.
    Best regards.

  • InfoSet - Aggregated Value of Key Figures Field in BEx

    Hi,
    I have created an InfoSet which is comprised of 1 InfoObject and 3 DSOs. I can see there are more records in the InfoSet than in the BEx report for the InfoSet and in the BEx report the value of an amount field summed up for the duplicate records fall within the same date range. Example:
    In the InfoSet I see:
                   Name       Valid From     Valid To         Amount
    Record 1: James      16.06.1998     31.12.1998     25000
    Record 2: James      16.06.1998     31.12.1998     25000
    For the corresponding record in the BEx report for the InfoSet I see:
    Record: James     16.06.1998    31.12.1998     50000
    It is correct that this particular record is displayed once in the report but the value of the amount field shouldn't be added up. Do you have idea of this?
    You help on this is much appreciated.

    Hi,
    U want to be added the amount field or u dnt want to be cumulate the value..
    Khaja

  • Bex Report Designer is not previewing changes in QA

    Hi All,
    Please help... i am getting an unusual problem with bex report designer. I have created a bex report using report designer. This was then transported in to QA. In QA i opened my created report using report designer and clicked the print version button to preview the report in PDF format. This all worked correclty, however i noticed a spelling mistake in one of the custom text fields i am using.
    So i put the report in a transport in dev, made the changes in dev and previewed in dev. Everything is ok here and i can see the change i made.
    After this i transported the report to QA and when i open the report in report designer to preview the data i can see in design mode that the custom text field does HAVE the change i made so it is correct. The problem i am getting is though when i preview to see in PDF format the image i get is of the old preview with the spelling mistake.
    SInce i have made more changes and i can see the changes in DEV and in QA in design mode but when i preview it shows me the old image from the 1st preview.
    Please can anyone shed any light into this issue.
    Kind regards
    Forhad

    Refreshed the JAVA server resolved issue

  • BW (BEX) Reports  Vs  Crystal Reports

    Hello,
       Could any one please let me know Breif about the Crystal Reports
       Introduction of Crystal reports and how they differ from BW(BEx) Reports
    Thanks

    You can find some information in www.businessobjects.com or www.crystalreports.com for example the following.
    http://www.businessobjects.com/global/pdf/solutions/xi_sap_insight.pdf

  • Bex Report Autosave?

    Dear Friends ,
    I have SD reports in BI,it is taking time to run reports.is there any possible to save bex reports automatically by giving desired location,so that my users open that folder and can see the reports.
    Thnx
    Seshagiri

    Why don't you try saving them as workbook which user can access from the server.
    You can broadcast them to user's mailbox daily with refreshed data automatically.

  • Profit center report showing double the plan value comparing to cost center

    Dear Friends,
    We have an issue with the profit center report wherein we have maintained forecast value in version 2 in cost centers and when we run profit center report the values are showing double the value which we maintained in cost centers. Is this the problem in running 1KE0 transaction.?. We have run 1KE0 to update the missing value by deleting the existing values, so few profit center report is corrected but many other profit center report has gone wrong.
    Could you please guide me to correct the values. Business requires to see the same value in cost and profit center. Note; We have created cost and profit centers the same code and assigned to each other.
    Thanks,
    Lokesh

    No answers yet

Maybe you are looking for