WebI reports - Universe(source) change
Post Author: Use_BO
CA Forum: WebIntelligence Reporting
hi,
I have a question regarding webI reports.
If there are 2 universes of absolute same structure and objects, can the WebI reports built on one universe accessed from the other.
Is there any way we can change the source universe of a report. Or you have to build the WebI reports from scratch for the new universe
Please help me with this question. This is very urgent.
Thanks.
Post Author: DebT
CA Forum: WebIntelligence Reporting
Yes, you can change the universe used in WebI reports (assuming you are using XI R2 - don't know about prior versions)1. Open you WebI report2. Go to Edit Query3. Click on the Properties tab4. Under the Universe section, click the ... button to the right of the current Universe name.5. A list of your universes will appear, find the new universe in the list and click OK6. The Change Source dialog box will appear, it will automatically map fields of the same name. If your names don't exactly match, you can manually map them.7. Once you are have verified the field mapping, click OK8. Your report is now pointed to the new universe!Hope that helps!
Similar Messages
-
Webi report - Excel Source - breaks if excel is edited
I have a Webi Report that uses Excel has its data source. I have many variables defined in the webi report. Now, I had to add a new column in the source excel. When I do that, all the variables in the webi report break. Is there a way around this? I want to add columns to excel and not break my variables. Using BO 4.0 SP5.
The references in variables are changing.
Suppose I have Field1, Field3 in excel (Field Selection - All fields). I create a variable Field1 + Field3 and show it on report. If I add a new column Field2 in the excel in between Field1 and Field3, and refresh and point/load that excel, the variable changes by itself to Field1+Field2. It seems like I need to rebuild the webi report again. This is just an example. All varaiable references seem to break. Have you not had such problems? -
Migrate Webi Report / Universe from Dev to production
Hello,
there are lot of possibilities to migrate a Webi report or a universe from Development server to Production server. my question for the experts is what is best practice scenario to do that. What should i take in consideration.
if i rename my Production universe, place it in an other Path and base my migration on the option "compare name and Path" of the universes. would it migrate ? What about the Connection ?
My Target when migrating Universes. Is only to migrate the universe without connections
But when migrating Webi Reports is to migrate only the reports without universes or connections. But at the same time be sure that the Report is adressed to the right universe in the Destination System.
Is that realistic .. Thanx ..Prerequest:
You should have Remote access to both the server the BO is installed
Approach1:
Login to source server
create a folder with the name temp.biar in the desktop of server 1
Go to import wizard of server 1
select server 1 as source and temp.biar file as a destination and import all that required to biar file
from server 1 connect to server 2 and place this biar file in some shared folder
connect to server2
open the shared folder and copy that biar file and place it in the desktop of server2
Go to import wizard of server 2
select the temp.biar file from desktop of server 2 and destination as server 2
and complete the process
Note: as we are doing this in remote, there will be lot of issues while connection to path which sometimes even the erro r message will mislead us....
Approach2:
dont create any biar file
Login to server 2
Go to import wizard
select server 1 as source and server 2 as destination and move directly from server to server
Approach2 is not preffered if server 2 is production serve....
this may help
Thanks,
-Ganesh -
4.0 Webi Report Author name change
Hi Gurus,
I want to change the Intial Report author name to new report Developer name in SAP BO 4.0. I have tried with Save as option but this couldn't help me.
Can you please let me know, how we can change the Webi Report author name ?
Best Regards,
SaiHi Mahi,
Thank you for your kind information.
I’m not sure how I can implement this Java script since I have never worked on the JAVA sdk.
Could you please let me know step by step how I can implement this ?
Best Regards,
Saidi Reddy -
Unable to do Drill by in webi report and source is BW Query
Hai All,
I have Dimension ID and Description Columns, when i try to drill one by one it is working fine and it is showing descriptions accordingly. when i use Drill By on Dimension ID it is working for ID only but Description are not changing accordingly.
Source is BW QUERY->universe->Webi reportHai
Check these Links
http://www.youtube.com/watch?v=rfT93enl1xw
http://howtobi.wordpress.com/2010/11/27/drill-down-and-drill-across-in-webi/
http://businessintelligence.ittoolbox.com/groups/technical-functional/businessobjects-dev-l/drill-down-option-in-web-intelligence-reports-1077058
http://www.forumtopics.com/busobj/viewtopic.php?t=17203
http://www.youtube.com/watch?v=ZuekboIdXk0
http://www.forumtopics.com/busobj/viewtopic.php?t=33909&sid=d04b3e697f55ad8e4c461514067b87d4
I Hope it willl Definately Help u -
Web report data provider change from Master data table to InfoCube
hi Experts,
I have created one report on top of multiprovider but in the selection screen when i check the values for a variable I came to know that data is coming from master data table and not from data provider(InfoCube).Can any one help to change the data selection from master data table to data provider(InfoCube) and i am sure that there is no ODS involved in the multiprovider.
Thanks in advance
With Regards,
BalaHello,
If u are using Analyser then just put a Analysis Grid on the output of the query(should cover all the rows and column) , click on the grid and put the dataprovider. and do auto fit.
Rohit -
Change of image in web reports (MIME repository : SE80)
Hello,
i want to replace company logo in web reports.
i have changed the logo (image) through MIME repository in SE80 transaction, but i am unable to see the unchanged logo on portal/web reports.
What can be the issue. Is there any setting anywhere that needs to be done?
Thanks,
Shweta.Hi,
Please check the Image name like
supported ex:
"company_logo.jpg"
Not supported Example:
"company logo.jpg"
"company_logo.JPG"
"Company_Logo.Jpg"
Concerning the missing images in the WAD please check, if the images
are available in the Mime Repository:
Transaction SE80 -> MIME Repository -> SAP -> BW -> BEx ->
Publisher -> GIFS -> WebItem_Previews -> e.g. "broadcast_prev.gif"
Check the below link:
http://help.sap.com/saphelp_nw70/helpdata/EN/44/4cd282bd414e35e10000000a1553f6/frameset.htm
Thanks,
Venkat -
Error in WEBI report and MDXTEST when using Dimensions in Prompt
Hi,
I am using BOXIR3.1 SP2, SAPBI 7.0
I m creating a webI report (Universe is on SAP BI Query.) which include following objcets in Query section of WebI pannel:
Business partner, Account Class, Total Arreas count.
The Condition pane of Webi Includes Prompt on object "Account Class".
When I run a report, I get List of values for Dimension Account Class, when I select one of available value eg: Commercial Customer,I get Following Error.
A database error occured. The database error text is: The MDX query SELECT { [Measures].[4EITIDWAFWLLZD2ONIAVCKD56] } ON COLUMNS , NON EMPTY CROSSJOIN( [Z_BPATNER].[LEVEL01].MEMBERS, { [Z_FCACTBP__0UCACC_CLAS].[Commercial Customers] } ) ON ROWS FROM [ZFC_M07/Z_FC_M07_Q002] failed to execute with the error Value Commercial Customers for characteristic Z_FCACTBP__0UCACC_CLAS unknown. (WIS 10901)
I tried running same query in MDXTEST editor of BI. I got same error!!!
Then I tried changing the MDX Query as:
SELECT { [Measures].[4EITIDWAFWLLZD2ONIAVCKD56] }
ON COLUMNS , NON EMPTY CROSSJOIN( [Z_BPATNER].[LEVEL01].MEMBERS, { [Z_FCACTBP__0UCACC_CLAS].[COM] } ) ON ROWS
FROM [ZFC_M07/Z_FC_M07_Q002]
Then it worked Fine!!! If you observe the change is in the value of Prompt Account Class [Z_FCACTBP__0UCACC_CLAS].[COM]
By default Dimension object in Universe shows text value, but when I changed the MDXQuery with Key value (This is one of the value of value is for [Z_FCACTBP__0UCACC_CLAS].[Level01] object in mDX test Editor.) It works fine.
I wonder How do i solve this problem!! List of values available in dimension cannot be changed at universe level.
Please let me know if any solution for this exists.
regads,
Nisha.Hi Ingo,
I am creating the prompt on the dimension "Account Class" at WebI level.
The Technical name of this object is: [Z_FCACTBP__0UCACC_CLAS].[LEVEL01]
Also,
I confirmed that Index Awareness is applied on this dimension as [Z_FCACTBP__0UCACC_CLAS].[LEVEL01].[TECH_NAME].
This Dimension has detail object called "Account Class (Key) "and "Account Class (Medium name)".
MDXtest editor in SAP, shows me text as well as [ Level01] values:
Eg: Account Class InfoObject has values "Commercial Customer " (This is text value)and "[Z_FCACTBP__0UCACC_CLAS].[COM]".
COM Refers to Commercial Customer .
So In WebI when I use Dimension "Account Class" as prompt, I get Text value of this InfoObject which is "Commercial Customer ".
and MDXQuery Fails. But when I modify this query in mDXTEST Editor with value as "[Z_FCACTBP__0UCACC_CLAS].[COM]", It work fine.
I donu2019t understand the reason, since this problem is with almost 90% of Dimension object.
When I delete this object from universe, and refresh the universe then webI works fine.
But, if for some reason I refresh the universe again, the Dimension object as a prompt doesnu2019t work!!!
This error occurs every time I refresh the universe.
We are in UAT phase and soon to go Live!! We cannot afford to delete the object every time I refresh the universe.
Please let me know your inputs.
regards,
Nisha.
Edited by: Nisha Makhija on Oct 15, 2009 4:56 PM -
Webi report publication with org unit personalization mapping
Hi everyone,
I have an HR Webi report whose source is a Bex query and is scheduled (published) weekly. The report is meant for managers so in the dynamic recipient report (another webi report) I have manager's name, email and org unit. Right now the bex query does not restrict by organizational unit, the filtering by unit is done in webi through the 0employee's org unit attribute. This works, each manager only sees data of her own employees.
However, managers would like to see not only their direct people (employees belonging to her own org unit) but also submanagers, ie, managers of subordinate org units. I tried filtering through the org unit of 0ORGUNIT, not the employee's o.unit attribute, but that doesn't work. The same manager shows up multiple times in the report.
Has anyone managed to publish a webi report (or Crystal if that's possible) that shows the chief hat's subhierarchy?
thanksHi Graham,
The publication should work in the same way for a user or a group.
Can you please elaborate on u201Cassigning a user to the groupu201D, I believe this is probably where you go wrong.
Please test same workflow I suggested yesterady, but instead of user, use the group:
1. create the profile
2. add the group to the profile
3. assign the profile value to the group for that profile
4. add the group to the publication as Recipient
Does it work or not? If so, then do as follow for the user and group:
1. create the profile
2. Add user and group to the profile
3. assign the profile value to the user and group for that profile
4. add the user and group to the publication as Recipient
Please note that in the above steps, you donu2019t have to assign the user to the group.
Regards,
Jeff -
Removed variable still shows up in the variable screen of a Web report
Hello,
I am using a variable screen in a web report. I changed the variable on 0CALMONTH, but I still can see the old one. Two variables now show up. In Bex, only the new one can be seen.
Does anyone knows the reason for that? I'm using BW 7.0 with the 3.5 reporting functionalities.
Thanks in advance, NathalieNathalie,
i'm sorry, it's not datasource... it's dataprovider
delete the dataprovider from the the HTML Code...you could see the DataProvider in <Object>... </Object>
suppose let us assume that you have DataProvider and DataProvider. you are not using DataProvider3, delete from the HTML code.
delete this block from HTML.
<object>
<param name="OWNER" value="SAP_BW"/>
<param name="CMD" value="SET_DATA_PROVIDER"/>
<param name="NAME" value="DATAPROVIDER_3"/>
<param name="QUERY" value="NEWQUERY123"/>
<param name="INFOCUBE" value="ZSD_OPST3"/>
DATA_PROVIDER: DATAPROVIDER_3
</object>
Create a new Web application that will give you correct result.
Can you please update the thread.
all the best.
Regards,
Nagesh Ganisetti. -
Webi report running continuosly
Hi,
I am working with a webi report, did some changes and when I click on Run Query, the Opening document dialog box is displayed and the report data is not displayed.
I clicked on Canel button and tried to run another webi report and it also does the same thing.
When I try to run another documents such as Crystal Report, is runs fine.
I am using BO XI 3.1 server and MS SQL Server 2008.
Any help in this regard is appreciated.
Thank you.Hi
have you tried restarting the Web Intelligence Processing servers in your system?
Regards,
Stratos -
Error - Generating WebI report with Multi-Source universe (.unx)
Hello ,
While creating WebI report from multisource universe (.unx) , created using
relational connection with SAP BW JCO connector , following JCO exception is
cropping up
Database error: [Data Federator Driver] [Server] [Connector 'Test_RCN_01'] SAP
NetWeaver BW has reported an exception: com.sap.conn.jco.JCoException: (101)
JCO_ERROR_CONFIGURATION: Server configuration for DF_SERV-bitest-3300-NOSNC is
already used for a running server. (IES 10901) (WIS 10901)
Steps followed for Multi-source universe creation
1. creating relation connection ( Passed)
2. Creating Data foundation using this connection (passed)
3. Mapping two parameters (programIDMapping, hostname ) with RFC destination and
BW FQDN ( passed )
4. Creating Business layer for this Data foundation (passed)
5. Open webintelligence with SSO and while creating the reports using the .unx ,
the above error is coming
already implemented SAP note no 1638647
System used
SAP BW 7.1 with EHP 1 and SP 10
SAP BI 4.0 SP2
Data federation service admin tool version 14.0.2
thanks,
RajibHi,
try with this.
Starting the Gateway Service on the Message Server resolved this issue.
There have also been reports of this issue when name resolution issues occur between the client and the Message Server machine. As a test, you can add the Message Server name and IP address to the Windows\System32\Drivers\etc\hosts file.
Or check SAP note 1590518.
Thanks,
Amit -
WEBI report on a Universe - Time Format
Hi,
I have a WEBI report built on a universe that uses a BW query as a datasource.
In my BW report I have two time key figures of type DEC.
Actual Time and Scheduled Time in format HH:MM:SS or -HH:MM:SS if it is a negative value. It works well in Bex and RSRT.
There is a Universe report built on top of this report and my WEBI report is built on the universe.
When I run the WEBI report the time key figures display in the format 10,000 in BO instead of 01:00:00 (HH:MM:SS) as it is in Bex. It is obviously doing some type of internal conversion and outputting the wrong result.
Is there a way to convert the field in BO so that it outputs the same as Bw format?
I have tried changing the universe format properties of the field from Number to Character and back again but it does not give me any different result and in some cases it displays as #DataType.
Any suggestions welcome.
BO Version 3.1
BW Version 7.01
Regards,
JohnIf you select "Date/Time" in the format then select the time field, does this work for you?
It should be HH:mm:ss (capitalization matters).
I don't have a BW sample currently available to test so this screenshot is from an Oracle data source.
Also, are you able to set the object to a Date type?
- Carly -
Reg: How to change Multiple Queries in WebI Report
Hi all,
I am woking in Xcelsius Dashboard. I used WebI approach for creating dashboard. I have two customers which one customer has SAP and another customer does not have SAP. so intially I have used Excell as data source. now I want to replace the Excel with BI Queries.Both having same structure.while replacing I faced the following problem.
I created one WebI report based on Excel as data source that has two Queries(Two universes).I want to replace excel based universe with BI query based universe.If I change the universe in an one query ,the univese is changed in an another query also. How can I replace two different universes that based on BI queries with existing universes ?
How can i resolve the problem?
Thanks & Regards,
Hemalatha Jhema,
As Thomas mentioned, changing one Data Provider causes the other Data Provider to get changed as well -- this is a problem for trying to change the universe on one tab and the system automatically goes and goofs up the other tab(s) as well. I'm still on XI R2 and the problem happens so maybe someone with XI 3.1 or higher loaded can confirm that this unwanted occurrence has been cleared up or not.
Thanks,
John -
Deploying BO universes and webi reports in quality and production
Hi
We are on BO XIR2 SP5 and reporting on SAP BI Infocubes and Queries.
We have 3 environments setup,each for development,quality and production.
During universe development,while creating a new connection we provide the IP address of application server,username ,password,system id,client number etc details.
The above details would defer for 3 different environments.In our case we have built around 50 universes.
So what would be the smart way of deploying these universes in each of the other 2 environments?Because changing universe connection details would mean re creating the universe classes and objects which would be a huge effort.Would the webi reports continue to work upon re creating the universe with new connection details?
Please suggest a best and smart practice for the above scenario.Hi,
Using Import Wizard tool in BO you can migrate Universe and Reports from dev env to test.
Using the Import Wizard tool you can migrate the reports.
Steps are as follows:
Open Import window:
In Source environment , enter the details of dev environment.
Destination wizard you have to enter Test env credentials.
Then you have to select all the universe and the wid files from this wizard (The files you want to transfer ).
Finally finish this wizard by pressing finish button.........
Hope this will help you
Regards
Sindhu
Maybe you are looking for
-
I want to remove all of my photos out of iPhoto there are approximately 35000 some imported from an old hard drive and a SD Card from my Nikon D500 how do I do this? I have iPhoto version 9.1.5 (615) Mac OS X version 10.6.8 I want to do this because
-
How can I delete an old ICloud acct from my Iphone 4s. It wont except my password from old email and it wont send me the reset password to my mail ?
-
IPod Touch 5th gen RED product and Beats Pill disconnects
My iPod Touch 5th gen, RED product keeps disconnecting from my Beats Pill. I thought it was the Pill so I sent it back to the manufacturer, twice. Finally got a new Pill with the new firmware from them but the iPod Touch RED won't work. Boyfriend t
-
How to add images/photos to multiple item entries quickly?
We've got about 10,000 items in our database, and we've got pictures of all of them. We've got all of the items in the Business One database individually, with price and cost and barcode, etc. But we want to add the photo of each one to its respectiv
-
Purchase order automatic amount determination with scales
Hi, I have a problem with the automatic definition of amount of a purchase order item on the basis of the scales defined for a condition type (only for a material, the others are ok). As you can see in the attached images I have scales dedfined from