Webinar: NetWeaver Collaboration: What's new in NetWeaver '04

<b>SAP NetWeaver Know-How Network Webinar: 
NetWeaver Collaboration: What's new in NetWeaver '04
Wednesday 30 June  2004
11 a.m. EDT</b> •  <b>(6:00 p.m. UTC)</b>
On Wednesday 30 June, Kim (Darrell) Huffman, a NetWeaver X-NW RIG Consultant, hosts the webinar titled <b>NetWeaver Collaboration: What's new in NetWeaver '04</b> as part of the ongoing SAP NetWeaver Know-How Network Webinar Series.
Here’s how Kim describes his webinar presentation:
“SAP NetWeaver Collaboration, delivered with the SAP Enterprise Portal, is designed to enable individuals, teams, and interest groups to work together closely towards a common goal.
The comprehensive set of collaboration tools and services allows users to share relevant information, communicate online in real-time, plan with the help of a unified calendar, and provide a single point of access to documents and resources.”
SDN invites you to post your questions to the presenter prior to the webinar and continue the online discussion afterward.
<b>How to Participate</b>
(Please go to the SDN Events page to see the article and download the PDF presentation)
Dial-in Information:
Date: Wednesday 30 June 2004
Time: 11 a.m. EDT
Within the U.S., call: +1.888.428.4473
Outside the U.S., call: +1.651.291.0618
Password: NetWeaver04
WebEx Information:
Topic: SAP NetWeaver Know-How Network
Date: Wednesday 30 June 2004
Time: 11 a.m. EDT
Meeting Number: 742391500
Meeting Password: netweaver04 (lowercase)
WebEx Link: sap.webex.com
Replay Information:
A recorded replay of this call will be available for approximately three months after the webinar. Access this recording by dialing the appropriate number and using the replay access code 720147.
Toll-free: +1.800.475.6701
International: +1.320.365.3844
<b>About the SAP NetWeaver Know-How Webinar Series</b>
The SAP NetWeaver Know-How Webinar Series is driven by the SAP NetWeaver Regional Implementation Group (RIG), part of the SAP Development organization. The mission of the SAP NetWeaver RIG is to enable customers, employees, and partners to successfully implement the SAP NetWeaver solution. This SAP RIG has expertise in BI, EP, XI, and WebAS. They contribute their implementation expertise to the SDN implementation forums as well as to the SAP NetWeaver Know-How Webinar Series.
<b>Disclaimer</b>
SDN is not responsible for any changes to the webinar schedule. The webinar schedule may be changed or cancelled without prior notice.

At TechEd 2009, this was session UP201. You can also find a summary in the online help:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/4a/5bcb7d3d0c53efe10000000a42189c/frameset.htm
Here is also an eLearning video on the topic:
The specified item was not found. [original link is broken]
There are a variety of other eLearnings on new 7.01 (and 7.02 features) listed here:
/people/thomas.jung/blog/2006/06/20/web-dynpro-abap-demonstration-videos

Similar Messages

  • What's new in AE CC? Free webinar Thursday, 10 AM PST

    Innovation in Motion: What’s new in After Effects CC
    Thursday, June 20th, 2013 at 10:00am Pacific Time
    Take your creativity to new heights with the industry standard for motion graphics and visual effects. After Effects CC will give you the tools to work dynamically in 3D with precision and control in an integrated, collaborative workflow. Create photo-real visual content fast with awesome new advancements, such as the Live 3D Pipeline between After Effects and CINEMA 4D, an enhanced 3D Camera Tracker, and layer and mask snapping for faster composition construction. Save hours of tedious rotoscoping work with the Refine Edge tool. Be more creative, thanks to advancements in stabilization and other refinements for a more responsive workflow.
    Register now: http://www.adobe.com/cfusion/event/index.cfm?event=detail&id=1903730&loc=en_us

    I'm aware of that page, but there is often hundreds of other additions that are never mentioned there, or anywhere on the site at all... for example, all the smart playlists additions in (not so) recent versions were never mentioned there, nor (I think) were the addition of skip counts. There's all kinds of things apple adds into to itunes with every release - which I do appreciate... I'm just saying...
    Imagine if your wife/mom/whatever called your cable company and added channels to your cable package (and paid for them herself), but never told you about it... Sure it was nice of her, but you won't ever notice, until two months later when you are flipping through channels, and you leave it on Showtime long enough to notice there's actually a picture there....
    Message was edited by: Ijmitchell

  • Next Webinar in Lumira Series - What's New in SP 17? Wednesday, June 9th

    Calling all Lumira Enthusiasts!
    Welcome back to another session of our SAP Lumira Webinars.
    This week, on Wednesday July 9th, Henry Banks will present on the latest host of new product innovations in SP17 for data acquisition, visualization and storyboard composition (including authoring Infographics via SAP Lumira Cloud or SAP Lumira Server).
    Join us in seeing the latest innovations in action! Points of discussion/demonstration will include:
    • Connect to BW
    • Merge behaviours
    • Custom hierarchies
    • ESRI geospatial
    • Related Visualisations
    • Key Influencers
    • Web Compose
    • VizPacker SDK
    • Fiori configuration
    Date:  Wednesday, July 9, 10 AM PST
    Topic: SAP Lumira: What’s New in SP17?
    Presenter: Henry Banks, SAP Customer Experience Group
    Registration: Link on the events page on SCN.
    This webinar will be recorded, and a link to the recording will be posted within 1 week: on the same page on SCN.
    Feel free to forward this invite to anyone interested. We look forward to seeing you there!

    Calling all Lumira Enthusiasts!
    Welcome back to another session of our SAP Lumira Webinars.
    This week, on Wednesday July 9th, Henry Banks will present on the latest host of new product innovations in SP17 for data acquisition, visualization and storyboard composition (including authoring Infographics via SAP Lumira Cloud or SAP Lumira Server).
    Join us in seeing the latest innovations in action! Points of discussion/demonstration will include:
    • Connect to BW
    • Merge behaviours
    • Custom hierarchies
    • ESRI geospatial
    • Related Visualisations
    • Key Influencers
    • Web Compose
    • VizPacker SDK
    • Fiori configuration
    Date:  Wednesday, July 9, 10 AM PST
    Topic: SAP Lumira: What’s New in SP17?
    Presenter: Henry Banks, SAP Customer Experience Group
    Registration: Link on the events page on SCN.
    This webinar will be recorded, and a link to the recording will be posted within 1 week: on the same page on SCN.
    Feel free to forward this invite to anyone interested. We look forward to seeing you there!

  • Jan. 28 Webinar on what's new in FM12

    In case you've missed the announcement on the Forum overview page:
    Tues 28 January 8:00 AM Pacific, Kapil Verma (sr. product managr) will demonstrate the FrameMaker product line, including FrameMaker 12, FrameMaker XML Author 12, FrameMaker Publishing Server 12.
    You may register by going to: adobe.ly/1aIzOgq
    There's also a webinar on Thurs 6 February 8:00 AM Pacific, Vikram Verma (no relation) will demonstrate what’s new in Tech Comm Suite 5 and also RoboHelp 11.
    You may register for this one by going to: adobe.ly/19IRBc5

    BTW, the chat starts at 11:00 A.M. PST (2:00 P.M. EST/19:00 UTC).

  • What is new in BI 7.0

    I would appreciate if any of you could provide me with links  to relevant documents or information on what is new for BI 7.0..
    One of  my main intentions is finding out information on the changes in Process Change Monitoring.  As you all know the issue with the current tools  in BW(3.5) is that the if the chain doesn't start.  Well is hard to find out promptly,  and similar situation when activations hang .....   I was thinking in creating a custom tool, but I was told that BW 7.0 do provide tools to better monitor chains.   Well… if anyone has information on this …I would appreciate ….
    Thank you
    Alfonso.

    Hi ,
      Check these links ,
      <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3604c604-0901-0010-f0aa-b37378495537">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3604c604-0901-0010-f0aa-b37378495537</a>
    <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/a8/48c0417951d117e10000000a155106/content.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/a8/48c0417951d117e10000000a155106/content.htm</a>
    <a href="/people/markus.kohler/blog/2006/06/07/welcome-to-my-new-netweaver-performance-blog:///people/markus.kohler/blog/2006/06/07/welcome-to-my-new-netweaver-performance-blog
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6ce7b0a4-0b01-0010-52ac-a6e813c35a84">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6ce7b0a4-0b01-0010-52ac-a6e813c35a84</a>
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5ee3725b-0401-0010-e381-ac323362ce91">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5ee3725b-0401-0010-e381-ac323362ce91</a>
    Regards
    Renjith Kumar

  • What is new in Visual Composer 7.0 (EhP 1)

    Dear Modelers,
    You can have a look in the following blog in order to get the information about what is new in the SAP NW Visual Composer 7.0 Enhancement Package 1
    What's New in Visual Composer - Enhancement Package 1 for SAP NetWeaver 7.0
    Hope you find this information useful and have a nice modeling
    Kind Regards,
    Luis

    Create new Text tab in fields of Table & select Type as Date in VC or use DSRT date function

  • What is new in ECC 6.0

    can u please tell me what is new in ECC 6.0 .what is the difference between this and older version.
    a ppt or pdf  will be helpful

    Hi,
    ECC 5.0 is based on WAS 6.40 and ECC 6.0 is based on WAS 7.00.
    From functional point of view there are some minor differences, as the core functionalities are not changed a lot. However there is Industrial Solutions intergarated to ECC 6.0 by default.
    From ABAP point of view you have the following new elements/components:
    - New ABAP editor /meanwhile it's available via downport for lower releases as well/
    - ABAP WebDynpro
    - Enhancement framework
    - Regular experssion support
    Also check this link for functionality differences.
    http://solutionbrowser.erp.sap.fmpmedia.com/
    SAP R/3 is basic ERP that every one keeps talking about which has got different versions ike 3.1, 4.0, 4.6, 4.7. The latest one in this is the ECC which again has got two versions in the market - ECC 5.0 and ECC 6.0.
    NetWeaver is the techology stack which gives other solutions that work with R/3 and also provide a technology platform for the ERP to work.
    EP - Enterprise portal is a part of the NetWeaver stack and can be used to provide web interface for the user apart from the standard protal functionalities.
    You can find more details of NetWeaver here
    http://help.sap.com/content/documentation/netweaver/index.htm
    and also check these..
    Re: R/3 Enterprise v mySAP ERP 2003 v ECC 5.0 v mySAP ERP 2004
    Technical difference between 4.7 and ECC 5.0
    difference between sapr/3 4.7 and sapr/3 ecc 5.0
    Differences b/n 4.6c,4.7 and ECC 5.0
    http://help.sap.com/saphelp_47x200/helpdata/en/12/9d78d6d8f74043a32e82be87e433b7/frameset.htm
    Reward if it helps..
    Regards,
    Omkar.
    Message was edited by:
            Omkaram Yanamala

  • What is BI7.0?what is new in BI7.0?

    Hi,
    What is BI7.0?what is new in BI7.0?
    Can any body have goodmeterial about BI7.0?Please send to this mail id
    [email protected]
    immediate reply is highly appriciable.
    Regards,
    Chow.

    hi,
    chk these out..
    See this very nice presentation prepared by Dr Berg on new features of BI 7.0 (these are the differences between BI 7.0 and BW 3.5):
    http://csc-studentweb.lrc.edu/swp/Berg/Articles/NW2004s_what_is_new.ppt
    Check the release notes:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/a4/1be541f321c717e10000000a155106/content.htm
    This presentation:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/910aa7a7-0b01-0010-97a5-f28be23697d3
    Web Blog:
    /people/michael.eacrett/blog/2006/06/07/whats-new-in-sap-netweaver-702004s--an-introduction-to-the-functionality-deltas-and-major-changes
    You can also refer below posts:
    Re: BW 7.0 Release
    /message/1383908#1383908 [original link is broken]
    Upgrade from BW 3.5 to BW 7.0 (BI 7.0)
    Hi,
    Some features of BI 7 are
    1. In Infosets now you can include Infocubes as well.
    2. The Remodeling transaction helps you add new key figure and characteristics and handles historical data as well without much hassle. This is only for info cube.
    3. The BI accelerator (for now only for infocubes) helps in reducing query run time by almost a factor of 10 - 100. This BI accl is a separate box and would cost more. Vendors for these would be HP or IBM.
    4. The monitoring has been imprvoed with a new portal based cockpit. Which means you would need to have an EP guy in ur project for implementing the portal !
    5. Search functionality hass improved!! You can search any object. Not like 3.5
    6. Transformations are in and routines are passe! Yess, you can always revert to the old transactions too.
    this is a good PDF on Upgrade from BW 3.5 to BW 7.0
    latest on upgrade tp BI7.0
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/2e8e5288-0b01-0010-2ea8-bcd4df5084a7
    http://help.sap.com/bp_epv170/EP_US/Documentation/How-to/Planning/Master_Guide_NW2004s.pdf
    You can seek more information on BI 7.0 in the SAP NetWeaver2004s Ramp-Up.
    /community [original link is broken]
    Re: BW 7.0 Release
    Re: BW 7.0 Release
    Re: BW 7.0
    take a look presentation
    overview
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5ee3725b-0401-0010-e381-ac323362ce91
    detail
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46376d-0601-0010-83bf-c4f5f140e3d6
    https://www.sdn.sap.com/irj/sdn/developerareas/bi?rid=/webcontent/uuid/e78a5148-0701-0010-7da9-a6c721c6112e [original link is broken]
    may useful .....
    https://www.sdn.sap.com/irj/sdn/developerareas/bi
    http://help.sap.com/saphelp_nw04s/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
    Check these presentaions:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46376d-0601-0010-83bf-c4f5f140e3d6
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5ee3725b-0401-0010-e381-ac323362ce91
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46376d-0601-0010-83bf-c4f5f140e3d6
    http://csc-studentweb.lrc.edu/swp/Berg/BB_index_main.htm
    http://csc-studentweb.lrc.edu/swp/Berg/articles/NW2004s_what_is_new.ppt
    Also check out these links...
    http://help.sap.com/saphelp_nw2004s/helpdata/en/a4/1be541f321c717e10000000a155106/content.htm
    /message/502929#502929 [original link is broken]
    Hope this helps.

  • What's new in BI Content 7.35

    Hi Folks,
    Please let me know what is new i[SAP NetWeaver BI Content BI content 7.35 like new scenarios or new objects?
    I am looking at this link:
    [SAP NetWeaver BI Content|SAP NetWeaver BI Content]
    They show:
    What's New with BI Content Addon 7.04?
    What's New with BI Content Addon 7.05?
    But there is no update about 7.35.
    There is another link, which talks about the complete BW 7.35 content but not specific to new version.
    [Documentation for SAP NetWeaver 7.3 BI Content Add-On 5|http://help.sap.com/saphelp_bic735/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm]
    Please help in collecting new things in BI Content 7.35.
    Thanks in advance,
    Ashish

    So it's mostly a security fix release, according to this:
    http://www.adobe.com/support/security/bulletins/apsb11-21.html
    Ok, so that clears it up. Thank you!

  • New SDN Blog: What's new technically in Nakisa 3.0

    Hi all,
    Below is a link to my new SDN Blog entitled What's new technically in Nakisa 3.0:
    [/people/luke.marson/blog/2010/10/18/whats-new-technically-in-nakisa-30|/people/luke.marson/blog/2010/10/18/whats-new-technically-in-nakisa-30]
    Enjoy!
    Luke

    Hi Cindy,
    Here is a list of new features and enhacements in Universe Designer XI 3.0 and XI 3.1:
    XI 3.0
      <li> Support for MSAS 2005
      <li> SSO for SAP and MSAS 2005
      <li> Extend support for SAP NetWeaver BI prompting:
        <ul><li> Support of mandatory and optional variables
        <li>Support of variables with default values
        <li>Calendar UI for query filters
      </ul><li>Extend support for SAP NetWeaver BI metadata
        <li>Support time-dependency (Keydate)
        <li>Multi-currency/unit reports
      <li>Life Cycle Management and check integrity for  OLAP universes
      <li>OLAP universe customization
        <ul><li>Insert pre-defined query filters (more SAP variables)
        <li>Insert custom calculations
        <li>Use of Designer functions (@Prompt, @Select)
      </ul><li>Query as a Web Service
      <li>Multilingual universes (Translation Manager)
      <li>List of Values delegated search
      <li>Compulsory filters (mandatory filters)
      <li>Nested derived tables
      <li>Smart measures  (aggregation delegated to the database)
      <li>New drivers
        <ul><li>Stored Procedures and JavaBeans
        <li>Custom drivers
        <li>JDBC
        <li>Data Federator new sources  (Web services, XML, SAS)
      </ul><li>Semantic layer features for serving Web Intelligence
        <ul><li>Data sampling
        <li>Personal data providers (Web Intelligence rich client)
        <li>Track data changes
        <li>Percent rank
        <li>Optional prompts (Query panel)
        <li>u201CTotalu201D function
    </ul>
    XI 3.1
      <li>Enhanced prompts
      <li>Enhanced SDK for OLAP universes
      <li>MSAS 2008
      <li>Query banding
      <li>Data Federator input columns in universes
      <li>Enhanced Translation Manager
    <P>
    Didier

  • Is there a Way to Find or search what is new from version to version of CE / PO

    Hi Experts,
    I am looking for a way or link with which I can look for the version to version comparison or what is new in every version in one place.
    Thanks in Advance
    Best
    Bimal

    Hi Bimal,
    There is a link in sap Online Help where you can find "What's New in SAP NetWeaver 7.3 EHP1 (Release Notes)" using the following link
    What's New in SAP NetWeaver 7.3 EHP1 (Release Notes) - SAP Library
    Cheers
    Piyas

  • Firefox 5 was released. But i dont know that what is new in this compared to firefox 4.0.

    I didn't see anything new.

    Think of Firefox 5.0 as both a security update in place of 4.0.2 and having had some work done also, something that minor releases generally do not get.
    http://www.mozilla.com/en-US/firefox/5.0/releasenotes/
    See the "What's New in Firefox" section.

  • Anyone know what is new in iTunes 6.0.3.5?

    iTunes 6.0.3.5 came out today (with no relesae notes).
    Anyone here know what's new in it?
    Fujitsu Lifebook P-2120   Windows XP  

    Just installed and had a quick look, nothing obviously different. However it seemd that updating iPod was faster (with 6.0.2 it seemed to pause while copying songs and take longer), also my 5G 30GB iPod moved past "do not disconnect" considerably faster after clicking Eject iPod.
    Using version 1.1 of the iPod software and have been since it was released so the improvement seems to be brought about by 6.0.3.5
    HP Compaq dx6120 P4 2.8 GHz 1GB RAM (BABYJANE)   Windows XP   iPod : 5G 30GB (BLANCHE) 512MB Shuffle (BARBARELLA)

  • What is new in iTunes 6.0.1

    hello to everybody! just noticed that apple has released a new version of itunes (6.0.1)
    does anyone know what's new about it?
    TY
    BO

    hi bo!
    some bugfixes over 6.0.0.18. no new features beyond those in 6.0.0.18. here's the Wikipedia changelog:
    http://en.wikipedia.org/wiki/ITunes/changelog
    love, b

  • What is new in Enhancement Package 2 and 3

    Hi all,
    The [ERP Solution Browser|http://solutionbrowser.erp.sap.fmpmedia.com/] is an excellent tool to find out, what's new. However I did not find any means to get a list of new features in ERP 6.0 enhancement packages 2 and 3. Any hint (especially what's new in HCM) is welcome!
    Regards
      Matthias

    Hello Matthias,
    check out Service Marketplace, alias ERP-EhP to find out what's being delivered as part of an Enhancement Package:
    http://service.sap.com/erp-ehp (logon required).
    Basically, it provides the following:
    link to SAP Enhancement Package Infocenter to understand the content based on functional domain, e.g. HCM.
    documentation on
    - EhP concept and strategy
    - overview presentation SAP ERP EhP 2 and 3
    - detailed presentation SAP ERP EhP 2 and 3
    - preview SAP ERP EhP4
    - how to implement EhP ("Must know guide for IT professionals")
    - test case templates
    - links to other useful resources (e.g. ERP solution map, media library, functional areas)
    Hope this helps!

Maybe you are looking for

  • Time Machine is stuck on "Preparing Backup"

    My Backups have not worked for about a month.....and have been in a perpetual "preparing" state. I have Imac with OS version is 10.7.5, Build is 11G63 Have got this from console logs if it help shine any light on the nature of my issues, and how to f

  • Can I use Bridge CS6 as a central image database for linking to multiple documents?

    Can I use Bridge CS6 as a central image database for linking to multiple documents?

  • Read table with key doubt

    Hi guys! Please, what can i do when i use the Read table xxxx WITH KEY tab_key = value ASSIGNING <fs> statement and there is more than one entry with the specified selection criteria? How can i return the values to an internal table? I need to get al

  • Camera raw plug-in for Photoshop CS

    Can I download a camera raw plug-in for Photoshop CS (just CS, the really old one) that is compatible with my Rebel T2i? I can find info on which plug-in I need but when I try to find it they are all for newer versions of photoshop.

  • Using sequences in ADF-UIX

    Hi I am trying to add a record to a table using the create action from the data control. The underlying table has a sequence defined on it. Is there a way to get the next sequence number to show when the user clicks the Create button? thanks