Webloc files from drag and drop

Ok, before I start, let me say, I know this probably isn't the best place to post this, but I really don't know where else to ask.
For YEARS I have dragged images out of (generally) firefox (but also safari) windows/tabs and dropped them into my maps folder. The file has always been saved as a .jpg (or similar) file. I only grabbed a world map the other day, no problems. But today everytime I drag the map out of the tab into a folder I get a webloc instead. These are images of maps, not a google map type iframe. But it doesn't matter what I drag out, it's always being saved as a webloc file. I click on it, it open in firefox and I see my map, but I want the image, not this webloc file.
Did the internet change and not tell me? hehehe
Is there a secret setting that's been tweaked, and can I tweak it back?
Message was edited by: madivad

Well, this is getting ore weird!
ON one mac, it drags as a gif, on another it drags as a (wait for it....) .inetloc!!!! ***?
Some things are now dragging off as webloc and others as inetloc, there seems to be no consistency. I've figured there must be something running on the troubled mac which is interfering with the procedure. I'm going through things now looking at it (no luck so far). I'd just reboot, but I have a protected document which I'm completing and can't reboot until I do...
...some time later...
Ok.... I've rebooted and everything seems to be back to normal. This has been really weird!
The problem didn't care what browser I used, Safari, Firefox or Chrome, but now, as I said, it seems to be fixed.
Disregard and thanks for your time!
Dave

Similar Messages

When moving a file using drag and drop, as I hover over the destination folder it no longer opens, so I can't drop the file into the folder. Why?

When moving a file using drag and drop, as I hover over the destination folder it no longer opens, so I can't drop the file into the folder. Why? I have a heirarchical embedded folder structure under \Documents. Usually, as I drag the file to be moved over the various folders, they will blink twice, then expand/open to reveal contents (in Finder). Now, when the file to be moved is held (hovering) over the destination folder, it will not blink or expand, so there's no place to drop the file. If I release the mouse button, the file image disappears, showing that it is "going back to the place it came from", a.k.a. was not moved. This just started happening. I noticed it after upgrading to Mavericks. Is this a bug or could anything else be causing this?

As of today, Apple Support discovered during a remote support session with me that the same thing happens on their own system. It is isolated to "Column View"; the Icon and List views in Finder behave correctly. Issue is being escalated to engineering, and Apple will call to report status in a couple days. In all likelihood, this is a bug that will need to be addressed in a future update.

Transfering files using drag and drop to Nano P

I havent installed the supplied disks that came with my Nano Plus but am transfering files using drag and drop from "my music" folder on my computer to the Nano. These files are stored on my computer as the Name of the Artist as the folder name with a sub folder named the CD title (default setting when using Windows media to rip) with the individual track files in that folder.
When I drag the main folder over to my Nano it just displays the Album title on the screen but not by artist and there is no way to select by artist (you can just switch "folders" on the Nano which will then display the CD title. If I used the supplied software with my Nano to transfer the files will I be able to choose by artist, CD, Genre, etc or is this not a function of the Nano?
Is it best to just select the individual song tracks and throw them in one large group on the Nano and then it can figure out which artist, album, genre they belong to?

The player will only show directories that contain music files.
The behaviour you want is common on players that manage their content with a database (typically HD-based devices), but Creative's flash players don't work that way (and the software used on the host computer doesn't have any influence on this - the user interface is controlled by the player's firmware).

Mail doesn't attach files through dragging and dropping the files!

Help please,
Mail doesn't attach files through dragging and dropping the files on OS X ML, it crashes for a while !!

Open Disk Utility and Repair disk permissions on the First Aid tab.
Then, Restart and boot into Recovery Mode by holding down cmd-r on restart until you see a gray screen. When the Mac boots, you will be presented with some options. Choose Disk Utility and select your Hard drive volume (Macintosh HD is the default name). Then, on the First Aid tab, click Repair Disk (not permissions).
If that doesn't help, you could try installing the 10.8.2 combo updater from the Apple Downloads site:
http://support.apple.com/kb/DL1581

Is it possible to combine pdfs from software containing the file by dragging and dropping them?

We have a piece of software that we profile PDF files into it and then have a need to combine those PDFs into one file. Is it possible to just drag and drop from the software into the combine files area? I know if you open the files first, you can do that or if you save the documents locally, then you can combine them. It would be ideal to just select the files in the software, then drag and drop them into the combine pdf window. We are using Adobe Pro XI.

Hi Hawk2000,
The workflow you are talking about is very much possible with Acrobat and a good example is Microsoft Outlook from which we can select multiple e-mails and simply drag into Acrobat combine dialog box for combining.
What happens when you drag files from you software? Is it public software?
Can we test your software?
Regards,
Anoop

Visual Studio opening files when dragged and dropped in WPF app debugging session

I'm working on a WPF app (using VS2013 CE) which is intended to manage media files (TV Shows, movies, etc) and as part of this I am enabling the user to drag and drop media files on to the running app (by adding AllowDrop="True" and PreviewDragEnter="Window_PreviewDragEnter"
to my Window definition).
The problem I have is that when I drag files onto the app in a debugging session Visual Studio then opens the file(s) when I stop debugging... this is seriously annoying as when I am testing with large media files (> 1GB) it just locks up VS for minutes
at a time while it tries to open the file or files. When I run the app outside the debugger this does not happen - it's only when I'm in a VS debugging session. The only way I can stop this happening is to kill VS completely from Task Manager then restart
it - this is also very annoying but often I need to do this as it will freeze up for 5-10 minutes while it insists on loading the files in VS.
I understand the app, whilst debugging, is running in the context of VS but why does VS then have to try to open the files when debugging is finished? I have looked through the options but can't see anything to switch this off and no amount of searching
has turned up anything - can anyone put me out of my misery with a solution to this annoying issue?

Hello nzmike,
Does Visual Studio behaves like the following image shows and just hangs when opening your media file?
Do you have any other computer which installs Visual Studio? Can you reproduce this on it?
In order to troubleshoot this issue I think we need to locate the root reason of your issue. The problem can related to the following:
1. Your project is corrupt and VS then trys to load that file when debug finished.
2. Your VS is corrupt and caused this problem.
So please do something below:
1. Try clean and rebuild your project.
2. Switch to some other PCs and use VS and your project there, check if the problem can be reproduced.
3. You can backup your VS setting and try some commands: devenv /resetsettings and devenv /resetuserdata
Details about VS command:https://msdn.microsoft.com/en-us/library/xee0c8y7.aspx
And based on th research of the above second step, if you can reproduce this issue on more than one PC, the problem is pending on your project and I need you to share a simple sample which can reproduce this issue. We will need to investigate the project
in detail.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Get MessageId from drag and drop

Hi all,
Is there a way i can get the message id of a mail item that has been dragged and dropped into my "C#" form.
Main reason being, I'm having trouble getting the file contents from the drag and drop and if i could save the file to a temp location using ItemSaveMessage() I would be able to do what i'm after.
If not, what are the other ways to get message ids?
Cheers

Ok,
I'm having problems getting the ClientState.
Is there something I'm missing:
Code:
C3POTypeLibrary.C3POManager manager = new C3POC3POTypeLibrary.GWClientState c;
c = (C3POTypeLibrary.GWClientState)manager.ClientState;
object t = c.SelectedMessages;TypeLibrary.C3POManager();
The ClientState is always null. Do I need to link it to the instance of Groupwise already open? How would I do that?

Missing files after drag and drop

In the newest FCP X, I accidentally imported a couple .mov files into the wrong event. I dragged and dropped them into the correct event but now they are missing. I've checked each event in FCP, and also looked for the files in Finder (opening each event from FCP), for the files and can't find them. I can't find them at all in the FCP X created backup versions. Any other ideas on where to find the files?

Ah ha! Now I bet I know where they are! Go to the original Event, or the Event you copied them to. Dont' search names, look at the clips them selves. FCPX by defualt changes the names to creation time/date. Select everything in an Event, go to the Modify menu, to "Apply Custom Name", and select "Original Name From Camera". I bet they show up.
From now on, when you move or copy stuff, to verify it will work properly, and for peice of mind, highlight what you want (Event, Project, media file), go to the File menu and select the move or copy command.
And remember that FCPX renames your video when you import it. I hate it, too. But, that's how they do it.
Also remember when you rename the file in FCPX, the creation time/date name stays in the Finder.

Problem Copying Files using Drag and Drop in Finder

When I try to copy files from a camera's SD disk into a folder in Finder, it always seems to copy the files to some other location other than the folder I drag and dropped to. And then, when I try to redo the drag and drop, I get a message that these files already exist in the desired folder, even though I don't see them there!
Also when I create a new folder in Finder, it never places the new folder under the folder I've currently highlighted.
I'd love to hear whats going on here!
Ted

tedpratt wrote:
When I try to copy files from a camera's SD disk into a folder in Finder, it always seems to copy the files to some other location other than the folder I drag and dropped to. And then, when I try to redo the drag and drop, I get a message that these files already exist in the desired folder, even though I don't see them there!
What Finder "view" option are you using, List, Icons, Columns, or Cover Flow, for this question and the one below? Are you dragging those photos onto the icon of a closed folder or somewhere else? Please describe the exact process that you're executing.
Also when I create a new folder in Finder, it never places the new folder under the folder I've currently highlighted.
When you say "under", do you mean "within"? A new folder will be placed in the folder that's open.

Unable to upload a file with Drag and Drop and http

Hello,
I am trying to upload a file through the web interface (Netscape 4.7 and IE 5.0). When I click un upload, Via Drag and Drop, a new window is started, but never completes.
With Netscape, I get a message box: Netscape is unable to locate the server null. Please check the server name and try again.
With IE 5, I get an error: This page can not be displayed.
Are there any files I need to edit on the PC side to get this to work?
Thanks
Scott
PS I think you guys are doing a great job with support on iFS.

WebUI Drag & Drop requires FTP to be running and available.
Drag & Drop is really just uses the browser built in FTP ability.

Start Workflow when Upload File using drag and drop

Hi,
I am working with SharePoint 2013.
I have a workflow needed to be started and run only once after a document is uploaded into the document library. The document library has
required custom columns with default values. If I set workflow starting option as 'On Created', when user got redirected to the edit form and click 'Save', there would be error as
"The <filename> has been modified by <user> on <datetime>". Besides the unwanted error dialog, the metadata entered by users are not reflected. I understand the issue is because the workflow had already started before
the edit form showed and it modified the file.
So I changed the starting option to 'On Changed", created an additional column to record if the workflow has been run or not to avoid running the whole workflow more than once. This works fine for normal upload. However on drag and drop, the
event 'On Changed' is not triggered and the workflow is not started. I checked the version of the file but in both normal upload and drag and drop, there is another version after the first version. But
only the version of normal upload triggers the workflow.
I read an article about some Mode = Upload on the edit form.
https://go4answers.webhost4life.com/Example/workflow-triggered-during-upload-user-149297.aspx
It seems that the Mode = Upload is not there anymore for normal upload, but it's still there for drag and drop. Not sure about this
Is there a solution for my case. Basically I want to start the workflow only once when the document is uploaded normally or via drag and drop. For normal upload, user can
edit the custom metadata right after they browse the file. For drag and drop, the
metadata will be set as default values.
Thank you.

I'm still researching your issue, but as an interesting note... This is an issue only when I use a 2013 style workflow. I do not get the error when using a 2010 style workflow.
Mike Smith TechTrainingNotes.blogspot.com
Books:
SharePoint 2007 2010 Customization for the Site Owner,
SharePoint 2010 Security for the Site Owner

Moving files by drag and drop

Am I missing a trick in Finder? I have it set to the "three panels" where sub folders are displayed. If I have file in Panel A (leftmost) and I want to drag and drop it into a sub-folder or a folder in Panel A, how do I do it ?!! I can see the sub-folders in Panel B when I click on the main folder in Panel A, but as soon as I click on the stray file in Panel A, all the sub-folders in Panel B go disappear (as I am no longer clicked on the main folder).
What I currently tend to do is drag the file to the desktop and then re-drag it to the sub-folder once I get it to re-display. Sometimes, I'll also try and hold the file while precariously trying to navigate towards the relevant subfolder, but only in times of madness. Either way it seems a very inconvenient making straight forward file movements, and I am wondering if I have something set wrong?

Your best bet is to open a Window to Panel A & another Window to Panel B, or get a Desktop/Finder replacement APP.

Combining files by drag and drop not working

running acrobat XI on XP ... Hp pc/ laptops when you try to drag a pdf attachment from gmail and try to drop it to combine with others it's no longer allowed (circle w/ a line thru it -displayed) - this option was working previoulsy

Hi Mikem15211307,
Document needs to be downloaded from gmail server to your local storage so that it can be processed and merged with other documents.
Regards,
Rahul

File links / drag and drop no longer work with MS Office 2008

not sure what happened, but my installed and up to date version of MS Office suddenly refuses to accept file open events. Cannot double click on files anymore, nor can I drop files into the MS icons in the dock. The only way to open files is now using the "open" command from inside the application.
This error seems to be global on my system, across multiple user personalities, and doesn't go away with a restart.
Anyone have an idea what could be the problem?
Thanks,
Michael

Do a "get info" on one of these files.
About the middle of the info box is a pull down menu labeled "open with".
Pick your office app and then check the box labeled " change all".
Now double click on the type of file that pertains to the app you choose.
If this does work, do the same for one file each of the office apps.

On Lion OS why do new icons not appear on the desk top either from drag and drop of scanning onto

There seems to be an error on Lion OS which I installed recently. If you drag files onto the desk top they disappear. However, they can be found in finder. If you scan direct to the desk top they also do not appear. Is there a bug?

Sounds to me like you have a corrupt plist file.
First thing I would try would be to simply relaunch your Finder and see if that sorts your problem.
>ForceQuit>Finder>Relaunch
If not navagate to com.apple.desktop.plist and delete.
Finder>GO>(option Key)Library/Preferences/com.apple.desktop.plist
or in Finder shortcut ( ⇧⌘G) copy and paste:
~/Library/Preferences/
delete the com.apple.desktop.plist
Relaunch your Finder again.
The deleted plist will rebuild itself to default setting after Finder relaunch
Report back on your sucess or failure.

Webloc files from drag and drop

Similar Messages

Maybe you are looking for