Weblog Not Functioning After 10.4.10 to 10.5 Upgrade

Last night we ran the 10.5 upgrade DVD on our 10.4.10 server which was only running web (w/ weblogs enabled) and Software Update services. This box is also bound to AD.
After the upgrade my AD Bind was broken but is now fixed by unbinding and re-binding. This fixed all exsiting local groups that are populated with AD users.
My two unresolved issues, SU and web services are not working/not working correctly.
1. web services is running although blogs and wikis are not, although they are enabled in server admin. When I go to the default homepage, I get a standard OS X page but not of my original content (weblogs) are accessible. I also can't create any new blogs or wikis as I get a message "checking status". I can see the content in the finder at /Library/WebServer/Documents but not online. I did not make any changes to the original webserver config (still running APache 1.3 and Tomcat is not enabled). When attempting to access a formal weblog URL, I get the following error message:
Service Temporarily Unavailable
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.
Apache/1.3.39 Server at blogs.springside.org Port 16080
This makes me think somehow the service is not turned on, even though it's say it is in the server admin?
2. We were using this server for SUs in the past. At this point, I can't even get the server to start.
I am hopeful that since I have our content local on the XServe that all is not lost.
Any helpful friends out there?!
TIA,
--Pete
Message was edited by: pdidonato

Hello,
Possibly the mysql server can't get started because /tmp/mysql.sock does not exist. The reason therefor is, that the php module expect the socket to be in /var/mysql/mysql.sock, but this folder does not exist under Leopard.
This workaround helped me to get my MySQL work under Tiger (but not the server version, I am using the desktop version).
1. Start the MySQL Server in safe-mode using the Terminal (you will have to confirm using your admin password):
sudo /usr/local/mysql/bin/safe_mysqld
2. Then open a new Terminal window and create a directory (you will have to confirm using your admin password):
sudo mkdir /var/mysql/
3. Then you create a symbolic link:
sudo ln -s /tmp/mysql.sock /var/mysql/mysql.sock
4. Now you have to restart the MySQL-Server and that's it. I restarted the server in System Preferences/Sharing/WebSharing and I stopped and restarted the MySQL Server through the System PrefPane (also be found in System Preferences).
I hope that helps.
Kind regards,
Cornelia

Similar Messages

  • Firewire does not function after uninstalling macfuse and an out of date version of NTFS32 and then installed latest version of Tuxera NTFS for Mac.

    I purchased a 3TB HDD (WD USB 3.0 $100) to replace the 2TB Seagate for a new Time Machine HDD. The 2B was full and backups were deleting older files. The 3TB was formatted NTFS and I want to "recover" the included SW before I reformatted the HDD for the iMac. I discovered that MacFuse was out of date and unsupported and my NTFS-32 was also out of date so I uninstalled both and then installed the most recent version of Tuxera NTFS for Mac. I rebooted and discovered that the FW800 port was unresponsive. Below is the EtreCheck report:
    Problem description:
    Firewire does not function after uninstalling macfuse and an out of date version of NTFS32 and then installed Tuxera NTFS for Mac.
    EtreCheck version: 2.0.8 (95)
    Report generated October 30, 2014 7:11:17 PM EDT
    Hardware Information: ℹ️
      iMac (24-inch Mid 2007) (Verified)
      iMac - model: iMac7,1
      1 2.8 GHz Intel Core 2 Duo CPU: 2-core
      4 GB RAM
      BANK 0/DIMM0
      2 GB DDR2 SDRAM 667 MHz ok
      BANK 1/DIMM1
      2 GB DDR2 SDRAM 667 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      ATI,RadeonHD2600 - VRAM: 256 MB
      iMac 1920 x 1200
    System Software: ℹ️
      OS X 10.8.5 (12F45) - Uptime: 0:17:34
    Disk Information: ℹ️
      WDC WD5000AAKS-40TMA0 disk0 : (500.11 GB)
      S.M.A.R.T. Status: Verified
      disk0s1 (disk0s1) <not mounted> : 210 MB
      ML 10.8 (disk0s2) /  [Startup]: 499.25 GB (20.92 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
    USB Information: ℹ️
      Apple Inc. Built-in iSight
      Apple Computer, Inc. IR Receiver
      Logitech USB Receiver
      Apple Inc. Bluetooth USB Host Controller
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /Applications/Hardware Monitor ƒ/HardwareMonitor.app
      [loaded] com.bresink.driver.BRESINKx86Monitoring (7.0) Support
      /Applications/Parallels Desktop.app
      [not loaded] com.parallels.kext.hidhook (8.0 18615.948847) Support
      [not loaded] com.parallels.kext.hypervisor (8.0 18615.948847) Support
      [not loaded] com.parallels.kext.netbridge (8.0 18615.948847) Support
      [not loaded] com.parallels.kext.usbconnect (8.0 18615.948847) Support
      [not loaded] com.parallels.kext.vnic (8.0 18615.948847) Support
      /Applications/Toast Titanium v11.1/Spin Doctor.app
      [not loaded] com.hzsystems.terminus.driver (4) Support
      /Applications/Toast Titanium/Toast Titanium v11.1 (1072).app
      [not loaded] com.roxio.TDIXController (2.0) Support
      /Library/Application Support/Symantec/AntiVirus
      [loaded] com.symantec.kext.SymAPComm (12.2f1 - SDK 10.6) Support
      /System/Library/Extensions
      [loaded] com.Logitech.Control Center.HID Driver (3.9.0 - SDK 10.6) Support
      [loaded] com.eltima.ElmediaPlayer.kext (1.58 - SDK 10.4) Support
      [not loaded] com.hzsystems.driver.CDSDAudioCaptureSupport (1.5) Support
      [not loaded] com.increw.kext.speedit (0.32) Support
      [loaded] com.logitech.manager.kernel.driver (4.10.0 - SDK 10.8) Support
      [not loaded] com.olympus.CamBlockCommandsDevice (2.0.0) Support
      [not loaded] com.olympus.CamBlockCommandsDeviceUP (2.0.0) Support
      [not loaded] com.palm.ClassicNotSeizeDriver (3.2.1) Support
      [not loaded] com.roxio.BluRaySupport (1.1.6) Support
      [not loaded] com.seagate.driver.PowSecDriverCore (5.1.1) Support
      [loaded] com.symantec.kext.internetSecurity (5.2f1 - SDK 10.6) Support
      [loaded] com.symantec.kext.ips (3.5f1 - SDK 10.6) Support
      [loaded] com.symantec.kext.ndcengine (1.0f1 - SDK 10.6) Support
      [loaded] com.taoeffect.ispy.kext (2.0.2 - SDK 10.2) Support
      /System/Library/Extensions/OlympusDSCDriver.kext/Contents/PlugIns
      [not loaded] com.olympus.CamFWSerialBusProtocolTransport (2.0.0) Support
      [not loaded] com.olympus.CamUSBMassStorageClass (2.0.0) Support
      /System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
      [not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.1.1) Support
      [not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.1.1) Support
      [not loaded] com.seagate.driver.SeagateDriveIcons (5.1.1) Support
      /Users/[redacted]/Downloads/LCC Installer.app
      [not loaded] com.Logitech.Unifying.HID Driver (1.3.1 - SDK 10.8) Support
    Startup Items: ℹ️
      TuxeraNTFSUnmountHelper: Path: /Library/StartupItems/TuxeraNTFSUnmountHelper
      Startup items are obsolete and will not work in future versions of OS X
    Launch Agents: ℹ️
      [running] com.canon.MFManager.plist Support
      [not loaded] com.cooliris.SetLaunchArch.plist Support
      [loaded] com.google.keystone.agent.plist Support
      [running] com.Logitech.Control Center.Daemon.plist Support
      [running] com.logitech.manager.daemon.plist Support
      [running] com.micromat.TechToolProAgent.plist Support
      [loaded] com.oracle.java.Java-Updater.plist Support
      [running] com.seagate.SeagateStorageGauge.plist Support
      [running] com.symantec.uiagent.application.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [running] com.cleverfiles.cfbackd.plist Support
      [running] com.eltima.ElmediaPlayer.daemon.plist Support
      [loaded] com.embraceware.awaken.plist Support
      [loaded] com.google.keystone.daemon.plist Support
      [loaded] com.macpaw.CleanMyMac2.Agent.plist Support
      [running] com.micromat.TechToolProDaemon.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [loaded] com.oracle.java.Helper-Tool.plist Support
      [loaded] com.oracle.java.JavaUpdateHelper.plist Support
      [loaded] com.prosofteng.DriveGenius.locum.plist Support
      [running] com.smithmicro.schedulerdaemon.plist Support
      [loaded] com.symantec.liveupdate.daemon.ondemand.plist Support
      [failed] com.symantec.liveupdate.daemon.plist Support
      [not loaded] com.symantec.sep.migratesettings.plist Support
      [running] com.symantec.sharedsettings.plist Support
      [running] com.symantec.symdaemon.plist Support
      [running] com.taoeffect.ispyd.plist Support
      [running] com.wdc.drivemanagerservice.plist Support
    User Launch Agents: ℹ️
      [loaded] com.adobe.ARM.[...].plist Support
      [loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
      [loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
      [loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
      [running] com.prosofteng.DGMonitor.plist Support
      [running] com.smithmicro.cleaning.schedulermailer.plist Support
      [running] com.taoeffect.EspionageHelper.plist Support
    User Login Items: ℹ️
      Speedy Mac Application (/Applications/Speedy Mac/Speedy Mac.app)
      AwakenHelper Application (/Users/[redacted]/Library/Application Support/Awaken/AwakenHelper.app)
      GetBackupAgent Application (/Users/[redacted]/Library/Application Support/BeLight Software/Get Backup 2/GetBackupAgent.app)
      WDDriveUtilityHelper Application (/Users/[redacted]/Downloads/WD/WD Drive Utilities.app/Contents/Resources/WDDriveUtilityHelper.app)
      ClustersHelper Application (/Library/PreferencePanes/Clusters.prefPane/Contents/Resources/ClustersHelper.a pp)
      RealPlayer Downloader Agent Application (/Users/[redacted]/Library/Application Support/RealNetworks/RealPlayer Downloader Agent.app)
      SAVDiskMountNotify UNKNOWN (missing value)
      ScanNotification UNKNOWN (missing value)
      Launch Nikon Message Center 2 Application (/Applications/Nikon Software/Nikon Message Center 2/Nikon Message Center 2.app/Contents/SharedSupport/Launch Nikon Message Center 2.app)
    Internet Plug-ins: ℹ️
      EPPEX Plugin: Version: 10.0 Support
      Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
      AdobePDFViewer: Version: 9.4.6 Support
      Unity Web Player: Version: UnityPlayer version 3.5.3f3 - SDK 10.6 Support
      NPVirtools: Version: 4.0 Support
      iPhotoPhotocast: Version: 7.0 - SDK 10.8
      RealPlayer Plugin: Version: (null) Support
      DirectorShockwave: Version: 11.6.8r638 Support
      QuickTime Plugin: Version: 7.7.1
      FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
      GarminGpsControl: Version: 2.9.3.0 Release Support
      ToontownBundleManager: Version: (null) Support
      CANONiMAGEGATEWAYDL: Version: 3.1.0.2 Support
      Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
      OVSHelper: Version: 1.0 Support
      CoolirisWebKitPlugin: Version: (null) Support
      Google Earth Web Plug-in: Version: 6.1 Support
      Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 Support
      SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
      JavaAppletPlugin: Version: Java 7 Update 67 Check version
      OfficeLiveBrowserPlugin: Version: 12.3.6 Support
    User Internet Plug-ins: ℹ️
      BrowserPlus_2.9.2: Version: 2.9.2 Support
      Picasa: Version: 1.0 Support
    Safari Extensions: ℹ️
      DivX Plus Web Player HTML5 <video>
      Open in Internet Explorer
      DivX HiQ
      Aimersoft Video Converter
    3rd Party Preference Panes: ℹ️
      BrowserPlus  Support
      Clusters  Support
      Déjà Vu  Support
      Flash Player  Support
      Flip4Mac WMV  Support
      Java  Support
      Logitech Control Center  Support
      Logi Preference Manager  Support
      MenuMeters  Support
      Perian  Support
      Symantec QuickMenu  Support
      TechTool Protection  Support
      Tuxera NTFS  Support
    Time Machine: ℹ️
      Skip System Files: NO
      Auto backup: YES
      Destinations:
      iMac TimeMachine [Local]
      Total size: 2 TB
      Total number of backups: 80
      Oldest backup: 2011-09-18 05:21:33 +0000
      Last backup: 2014-10-05 20:18:55 +0000
      Size of backup disk: Excellent
      Backup size 2 TB > (Disk size 0 B X 3)
      /sbin excluded from backup!
      /usr excluded from backup!
      /System excluded from backup!
      /bin excluded from backup!
      /private excluded from backup!
      /Library excluded from backup!
      /Applications excluded from backup!
    Top Processes by CPU: ℹ️
          2% WindowServer
          0% Speedy
          0% SystemUIServer
          0% RealPlayer Downloader Agent
          0% ps
    Top Processes by Memory: ℹ️
      288 MB SymDaemon
      150 MB Speedy
      137 MB Safari
      82 MB WebProcess
      82 MB coreservicesd
    Virtual Memory Information: ℹ️
      2.17 GB Free RAM
      1.46 GB Active RAM
      148 MB Inactive RAM
      518 MB Wired RAM
      388 MB Page-ins
      0 B Page-outs
    I hope someone has some ideas! TIA.

    Do you have another cable you can test with? Do you have access to another computer with Firewire you can test with?
    FireWire Device not Working
    FireWire/USB - Quick Assist

  • Radio Fm in not functioning after upgarding firm w...

    Hi,
    radio Fm in not functioning after upgarding firm ware 410.21.010
    please help to solve it

    I am not aware of any "on-device" or native OS FM radio functions. Perhaps it has yet to be implemented, or awaiting a third party to develop an app to use it?
    I'd love to have it functional also!
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Customer exit is not functioning after ECC upgrade/support package

    It seems our customer exit is not functioning after ECC upgrade/support package. I tried to activate the project again, no use. please help. Thanks! (see below for the enhancement info)
    COZF0002 Change purchase req. for externally procured component
    EXIT_SAPLCOZF_002
    INCLUDE ZXCOZU02
    *&  Include           ZXCOZU02
    CONSTANTS: lcc_eban(25)   TYPE c VALUE '(SAPLCOBC)EBAN'.
    FIELD-SYMBOLS: <fs_eban>   TYPE eban.
    DATA: l_fkstl TYPE prps-fkstl.
    Move values from the LUW to the Internal Table
    ASSIGN (lcc_eban) TO <fs_eban>.
    If the field symbol is "NOT' empty then proceed
    IF ( <fs_eban> IS ASSIGNED ).
    if WBS work order, get cost center from PRPS
      IF ( caufvd_imp-auart = 'ZM05' ).
        SELECT SINGLE fkstl INTO l_fkstl FROM prps
          WHERE pspnr = caufvd_imp-pspel.
        IF ( sy-subrc = 0 ).
          WRITE l_fkstl TO <fs_eban>-zzfistl.
        ENDIF.
    if not WBS WO, move cost center minus leading zeros to funds center
      ELSE.
        WRITE caufvd_imp-kostl TO <fs_eban>-zzfistl.
      ENDIF.
    ENDIF.

    Did you mean set a break point in the follow code?(Include ZXCOZU02), I tried set a break point in this code, but It didn't stop .
    *& Include ZXCOZU02
    CONSTANTS: lcc_eban(25) TYPE c VALUE '(SAPLCOBC)EBAN'.
    FIELD-SYMBOLS: <fs_eban> TYPE eban.
    DATA: l_fkstl TYPE prps-fkstl.
    Move values from the LUW to the Internal Table
    ASSIGN (lcc_eban) TO <fs_eban>.
    If the field symbol is "NOT' empty then proceed
    IF ( <fs_eban> IS ASSIGNED ).
    if WBS work order, get cost center from PRPS
    IF ( caufvd_imp-auart = 'ZM05' ).
    SELECT SINGLE fkstl INTO l_fkstl FROM prps
    WHERE pspnr = caufvd_imp-pspel.
    IF ( sy-subrc = 0 ).
    WRITE l_fkstl TO <fs_eban>-zzfistl.
    ENDIF.
    if not WBS WO, move cost center minus leading zeros to funds center
    ELSE.
    WRITE caufvd_imp-kostl TO <fs_eban>-zzfistl.
    ENDIF.
    ENDIF.

  • Ipad3 camera not functioning after connecting to laptop

    After connecting ipad3 to my laptop to delete some photos, the camera does not function properly. it is slow and "saving photo" keep appearing when i capture. and no photos can be taken after that. what should i do?

    Hello @Rob1216 , and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are having issues scanning. I'd like to help!
    Does this issue occur when making a copy as opposed to a scan?
    I'd recommend starting with a power reset.  Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
    I would also recommend downloading and running the HP Print and Scan Doctor.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • "Finder" does not function after installing Leopard on Mac G5

    After successfully installing Leopard on my (new) MacBook Pro and on my (old:2003) iMac PowerMac 6,1 I tried installing Leopard on my 2005 iMac G5.
    The installation seemed successful, but after restarting the computer I was asked to choose the wireless network from a list. This was not possible. I do not use the Airport on this computer so tried to press "cancel". Could not do this and got the turning rainbow circle which never stopped.
    *The Finder does not function and cannot be restarted. This seems to be the main problem.
    I cannot log off or shut down and have to use the powerbutton to shut down.
    When starting up I do not get the Startup sound. Do get login and can login. But, all my desktop buttons have disappeared and I immediately get a notice that OS X shut down unexpectedly, asking me to cancel or send a report. Neither of these options are possible and the turning rainbow reappears. It's driving me crazy!
    I can sometimes open programs but no longer "system preferences".
    Is there anybody out there who can help me??
    I am especially frustrated since the other two installations on an older and on a newer Mac went well. I use the exact same programs on all three computers.
    HELP!

    After successfully installing Leopard on my (new) MacBook Pro and on my (old:2003) iMac PowerMac 6,1 I tried installing Leopard on my 2005 iMac G5.
    The installation seemed successful, but after restarting the computer I was asked to choose the wireless network from a list. This was not possible. I do not use the Airport on this computer so tried to press "cancel". Could not do this and got the turning rainbow circle which never stopped.
    *The Finder does not function and cannot be restarted. This seems to be the main problem.
    I cannot log off or shut down and have to use the powerbutton to shut down.
    When starting up I do not get the Startup sound. Do get login and can login. But, all my desktop buttons have disappeared and I immediately get a notice that OS X shut down unexpectedly, asking me to cancel or send a report. Neither of these options are possible and the turning rainbow reappears. It's driving me crazy!
    I can sometimes open programs but no longer "system preferences".
    Is there anybody out there who can help me??
    I am especially frustrated since the other two installations on an older and on a newer Mac went well. I use the exact same programs on all three computers.
    HELP!

  • SD card reader not functioning after update to Mavericks

    SD card reader no longer functioning after update to Mavericks

    Had the same problem.
    In Terminal, enter the command
    Killall Finder
    Worked for me - - SD card showed up when I next inserted it.

  • Hyperlinks are not functioning after publishing

    I am running iWeb 3.0.4 and am publishing to my host site through GoDaddy.com. The hyperlinks work fine in iWeb itself, but after I publish the site and then go to the site to check it, some hyperlinks work, but most don't. It appears to be very random which hyperlinks are working and which are not. After Enabling hyperlinks in iWeb and checking the box Make hyperlinks active, I am choosing to Link to > One of my pages. All seems to be in order but again, after publishing the site, only some hyperlinks work but most do not. I have tried modifying little things in iWeb to see if it will help upon publishing - over and over and over again - but to no avail. I cannot stress how irritating this problem is, not getting the site to work after publishing!!! UGH!
    I've seen other posts regarding this issue and still have not found an applicable solution or at least one that is fixing my problem. Any other suggestions? Thank you.

    Thank you guys so much - specifically Old Toad, Cyclosaurus and Roddy - for helping me figure out what's wrong with my iWeb site! Just these little things you guys are suggesting are helping me slowly fix these subtle problems. I don't understand why these things that you guys are suggesting aren't explained somewhere in iWeb.
    Because of your help I have been able to most of the hyperlinks to work now, but still not all of them. Still seems like I have to do some tweeking and moving around some of the text. I can't believe how inaccurate and inefficient iWeb is!
    Anyway, Cyclosaurus - is there any way to shrink the size of the Canvas element so that I don't have to keep adjusting the text just to get the hyperlinks to work?
    Thanks again!!

  • LabPython does not function after being built into an executable application (am i missing DLLs or Paths?)

    Greetings!!
    I have recently been playing around with the amazing power of Python in Labview and have built some very functional VIs that utilize this tactic. However I now find myself at a bind. Everything runs great in the IDE, but not so great as a standalone application.
    i am running:
    Windows 7 64bit
    Labview 2012 32bit
    Python 2.7.3 32bit
    My build specifications configuration attempts have all failed to run Python, and the application typically always return a very non descriptive error such as:
    PYTHON New Session__ogtk.vi->NameOfMyVIFile.vi
    I have tried adding DLLs to the "always include" section of the build spec.
    DLLs such as:
    Lvpython.dll
    pytscript.dll
    and I have even tried including them in both the support directory and the caller's directory to no avail. I have even tried placing the entire application + supporting files in my main Labview and python directories just to see their behavior with no apparent differences.
    so now I’m left with no options that i can think of. and I'm sure I have crawled around Google so much now that I’ve read all the same posts and websites nearly three times already.
    Please help me debug this!! I’m sure it’s something super simple but not very obvious that I’m missing.
    I hope everyone has a great day, and thank you!
    Grant.
    Solved!
    Go to Solution.

    My python installation folder is "C:\Python27" and python27.dll is located in there.
    initially i ran the "PYTHON Set Server Path" with an input string equal to: 'C:\Python27\python27.dll' while in the IDE. i have read however that (as long as the system path in windows is configured correctly) passing a string of just 'python27.dll' would work, but i did not try this.
    after that the "PYTHON Script Node" is what i used to test LabPython and all's ok in the IDE but not in applications.
    i have also tried this as an executable:
    Which porduces this:

  • Buttons do not function after Flash Movie

    I have a page with a number of buttons and a couple of flash
    "list" components. One of these lists, gives the user an option to
    select one of two modules and then navigates to a marker where a
    flash movie plays. When the user exits the flash movie. This is
    done via and exit button in the flash movie itself they returnt to
    the page where they started. After navigating to that page
    following the flash movie many but not all of the buttons are no
    longer functional, e.g they do not receive mouseEnters etc.

    Are the buttons in question Director buttons or Flash
    buttons? In either case, is the code for these buttons in a
    behavior that is attached to each button? Is there any part of this
    code that disables the button?

  • ASA5505 L2L VPN does not function after move and reconfiguration

                       I have an ASA5505 that had multiple VPNs to both Cisco5505's and other Vendor security appliances.  The one in question that moved to a new IP address checks out on isa sa, ipsec sa and nat, yet there is no communication accross the tunnel.  This behavior is consistent accross all remote sites. The remote sites function normally. Below is the output with some show commands.
    ASA Version 8.4(4)
    hostname RitterBars
    names
    name 67.231.37.42 RitterLAB-ASA
    name 67.231.37.45 RitterLAB-LB-WAN1
    name 64.233.131.94 RitterLAB-LB-WAN3
    interface Ethernet0/0
    switchport access vlan 2
    interface Ethernet0/1
    switchport access vlan 3
    interface Ethernet0/2
    interface Ethernet0/3
    interface Ethernet0/4
    interface Ethernet0/5
    interface Ethernet0/6
    interface Ethernet0/7
    interface Vlan1
    nameif inside
    security-level 100
    ip address 192.168.1.1 255.255.255.0
    interface Vlan2
    description Port 7 on 9108
    nameif outside
    security-level 0
    ip address dhcp setroute
    interface Vlan3
    no forward interface Vlan2
    nameif CoreNetwork
    security-level 0
    ip address 172.20.10.22 255.255.255.128
    boot system disk0:/asa844-k8.bin
    ftp mode passive
    clock timezone CST -6
    clock summer-time CST recurring
    object network obj-192.168.1.0
    subnet 192.168.1.0 255.255.255.0
    object network obj-192.168.9.0
    subnet 192.168.9.0 255.255.255.0
    object network obj-192.168.85.0
    subnet 192.168.85.0 255.255.255.0
    object network obj-10.200.1.0
    subnet 10.200.1.0 255.255.255.0
    object network obj-192.168.3.0
    subnet 192.168.3.0 255.255.255.0
    object network obj-192.168.1.2
    host 192.168.1.2
    object service obj-tcp-source-eq-22
    service tcp source eq ssh
    object service obj-tcp-source-eq-5922
    service tcp source eq 5922
    object network obj-192.168.1.10
    host 192.168.1.10
    object service obj-tcp-source-eq-5125
    service tcp source eq 5125
    object service obj-tcp-source-eq-80
    service tcp source eq www
    object network obj-192.168.1.119
    host 192.168.1.119
    object service obj-udp-source-eq-69
    service udp source eq tftp
    object network obj-192.168.1.51
    host 192.168.1.51
    object service obj-tcp-source-eq-443
    service tcp source eq https
    object service obj-tcp-source-eq-5980
    service tcp source eq 5980
    object network obj-192.168.1.114
    host 192.168.1.114
    object network obj-96.43.39.27
    host 96.43.39.27
    object network obj-xxx.xxx.xxx.xxx
    host xxx.xxx.xxx.xxx
    object-group network Inside
    network-object 192.168.1.0 255.255.255.0
    access-list split-tunnel extended permit ip 192.168.1.0 255.255.255.0 192.168.9.0 255.255.255.0
    access-list no_nat extended permit ip 192.168.1.0 255.255.255.0 192.168.9.0 255.255.255.0
    access-list no_nat extended permit ip 192.168.1.0 255.255.255.0 192.168.85.0 255.255.255.0
    access-list no_nat extended permit ip 192.168.1.0 255.255.255.0 10.200.1.0 255.255.255.0
    access-list no_nat extended permit ip 192.168.1.0 255.255.255.0 192.168.3.0 255.255.255.0
    access-list VPN2LAB extended permit ip 192.168.1.0 255.255.255.0 192.168.85.0 255.255.255.0
    access-list VPN2LAB extended permit ip 192.168.1.0 255.255.255.0 10.200.1.0 255.255.255.0
    access-list Barracudalab extended permit ip 192.168.1.0 255.255.255.0 192.168.3.0 255.255.255.0
    access-list inat extended permit ip 192.168.1.0 255.255.255.0 any
    access-list vnat extended permit ip 192.168.1.0 255.255.255.0 host 216.163.29.244
    access-list out2in extended permit tcp host 64.233.128.6 host 192.168.1.2 eq ssh
    access-list out2in extended permit tcp 64.233.128.0 255.255.255.0 host 192.168.1.2 eq ssh
    access-list out2in extended permit tcp 64.233.128.0 255.255.255.0 host 192.168.1.10 eq 5125
    access-list out2in extended permit tcp 64.233.128.0 255.255.255.0 host 192.168.1.10 eq www
    access-list out2in extended permit udp 64.233.128.0 255.255.255.0 host 192.168.1.119 eq tftp
    access-list out2in extended permit tcp 64.233.128.0 255.255.255.0 host 192.168.1.51 eq https
    access-list out2in extended permit ip 64.233.128.0 255.255.255.0 192.168.1.0 255.255.255.0
    access-list out2in extended permit tcp any host 192.168.1.10 eq 5125
    access-list out2in extended permit tcp any host 192.168.1.10 eq www
    access-list out2in extended permit tcp any 192.168.1.0 255.255.255.0 eq ftp
    access-list out2in extended permit tcp any 192.168.1.0 255.255.255.0 eq ftp-data
    access-list out2in extended permit udp any host 192.168.1.119 eq tftp
    access-list out2in extended permit tcp any host 192.168.1.51 eq https
    access-list out2in extended permit icmp any any
    pager lines 24
    logging console alerts
    logging asdm informational
    mtu inside 1500
    mtu outside 1500
    mtu CoreNetwork 1500
    ip local pool vpn-pool 192.168.9.10-192.168.9.250
    icmp unreachable rate-limit 1 burst-size 1
    asdm image disk0:/asdm-649.bin
    no asdm history enable
    arp timeout 14400
    nat (inside,any) source static obj-192.168.1.0 obj-192.168.1.0 destination static obj-192.168.9.0 obj-192.168.9.0 no-proxy-arp
    nat (inside,any) source static obj-192.168.1.0 obj-192.168.1.0 destination static obj-192.168.85.0 obj-192.168.85.0 no-proxy-arp
    nat (inside,any) source static obj-192.168.1.0 obj-192.168.1.0 destination static obj-10.200.1.0 obj-10.200.1.0 no-proxy-arp
    nat (inside,any) source static obj-192.168.1.0 obj-192.168.1.0 destination static obj-192.168.3.0 obj-192.168.3.0 no-proxy-arp
    nat (inside,outside) source static obj-192.168.1.2 interface service obj-tcp-source-eq-22 obj-tcp-source-eq-5922
    nat (inside,outside) source static obj-192.168.1.10 interface service obj-tcp-source-eq-5125 obj-tcp-source-eq-5125
    nat (inside,outside) source static obj-192.168.1.10 interface service obj-tcp-source-eq-80 obj-tcp-source-eq-80
    nat (inside,outside) source static obj-192.168.1.119 interface service obj-udp-source-eq-69 obj-udp-source-eq-69
    nat (inside,outside) source static obj-192.168.1.51 interface service obj-tcp-source-eq-443 obj-tcp-source-eq-5980
    nat (inside,outside) source static obj-192.168.1.114 obj-96.43.39.27
    nat (inside,CoreNetwork) source dynamic obj-192.168.1.0 interface destination static obj-xxx.xxx.xxx.xxx obj-xxx.xxx.xxx.xxx
    nat (inside,outside) source dynamic Inside interface
    nat (inside,outside) after-auto source dynamic any interface
    access-group out2in in interface outside
    route CoreNetwork 172.20.30.0 255.255.255.248 172.20.10.1 1
    route CoreNetwork 216.163.29.244 255.255.255.255 172.20.10.1 1
    timeout xlate 3:00:00
    timeout pat-xlate 0:00:30
    timeout conn 0:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    timeout floating-conn 0:00:00
    dynamic-access-policy-record DfltAccessPolicy
    user-identity default-domain LOCAL
    aaa authentication ssh console LOCAL
    http server enable
    http 192.168.1.0 255.255.255.0 inside
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart
    crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
    crypto ipsec ikev1 transform-set psset esp-aes-256 esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
    crypto map samap 1 match address VPN2LAB
    crypto map samap 1 set peer RitterLAB-ASA
    crypto map samap 1 set ikev1 transform-set ESP-AES-256-SHA
    crypto map samap 2 match address Barracudalab
    crypto map samap 2 set peer RitterLAB-LB-WAN1 RitterLAB-LB-WAN3
    crypto map samap 2 set ikev1 transform-set ESP-3DES-SHA
    crypto map samap interface outside
    crypto isakmp identity address
    crypto ikev1 enable outside
    crypto ikev1 policy 10
    authentication pre-share
    encryption aes-256
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 11
    authentication pre-share
    encryption 3des
    hash sha
    group 2
    lifetime 86400
    telnet timeout 5
    ssh 192.168.1.0 255.255.255.0 inside
    ssh timeout 5
    ssh key-exchange group dh-group1-sha1
    console timeout 0
    management-access inside
    dhcpd dns 64.233.128.10 64.233.128.11
    dhcpd auto_config outside
    dhcpd address 192.168.1.100-192.168.1.150 inside
    dhcpd enable inside
    threat-detection basic-threat
    threat-detection statistics access-list
    no threat-detection statistics tcp-intercept
    ntp server 66.187.233.4 source outside
    ntp server 64.99.80.30 source outside
    webvpn       
    username xxx.xxx.xxx.xxx password xxx.xxx.xxx.xxx encrypted privilege 15
    username xxx.xxx.xxx.xxx attributes
    vpn-group-policy WebVPNpolicy
    username xxx.xxx.xxx.xxx password xxx.xxx.xxx.xxx encrypted privilege 15
    username xxx.xxx.xxx.xxx attributes
    vpn-group-policy WebVPNpolicy
    tunnel-group 67.231.37.42 type ipsec-l2l
    tunnel-group 67.231.37.42 ipsec-attributes
    ikev1 pre-shared-key xxx.xxx.xxx.xxx
    tunnel-group 67.231.37.45 type ipsec-l2l
    tunnel-group 67.231.37.45 ipsec-attributes
    ikev1 pre-shared-key xxx.xxx.xxx.xxx
    tunnel-group 64.233.131.94 type ipsec-l2l
    tunnel-group 64.233.131.94 ipsec-attributes
    ikev1 pre-shared-key xxx.xxx.xxx.xxx
    class-map inspection_default
    match default-inspection-traffic
    policy-map type inspect dns preset_dns_map
    parameters
      message-length maximum 512
    policy-map global_policy
    class inspection_default
      inspect dns preset_dns_map
      inspect ftp
      inspect h323 h225
      inspect h323 ras
      inspect netbios
      inspect rsh
      inspect rtsp
      inspect skinny 
      inspect esmtp
      inspect sqlnet
      inspect sunrpc
      inspect xdmcp
      inspect ip-options
      inspect tftp
    service-policy global_policy global
    prompt hostname context
    no call-home reporting anonymous
    call-home
    profile CiscoTAC-1
      no active
      destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
      destination address email [email protected]
      destination transport-method http
      subscribe-to-alert-group diagnostic
      subscribe-to-alert-group environment
      subscribe-to-alert-group inventory periodic monthly
      subscribe-to-alert-group configuration periodic monthly
      subscribe-to-alert-group telemetry periodic daily
    Cryptochecksum:bcdf7281cbf323ff6af7457149529a5b
    : end
    RitterBars# sh isa sa
    IKEv1 SAs:
       Active SA: 2
        Rekey SA: 0 (A tunnel will report 1 Active and 1 Rekey SA during rekey)
    Total IKE SA: 2
    1   IKE Peer: 67.231.37.45
        Type    : L2L             Role    : responder
        Rekey   : no              State   : MM_ACTIVE
    2   IKE Peer: 67.231.37.42
        Type    : L2L             Role    : initiator
        Rekey   : no              State   : MM_ACTIVE
    There are no IKEv2 SAs
    RitterBars# sh ipsec sa
    interface: outside
        Crypto map tag: samap, seq num: 1, local addr: 96.43.41.168
          access-list VPN2LAB extended permit ip 192.168.1.0 255.255.255.0 192.168.85.0 255.255.255.0
          local ident (addr/mask/prot/port): (192.168.1.0/255.255.255.0/0/0)
          remote ident (addr/mask/prot/port): (192.168.85.0/255.255.255.0/0/0)
          current_peer: 67.231.37.42
          #pkts encaps: 4, #pkts encrypt: 4, #pkts digest: 4
          #pkts decaps: 0, #pkts decrypt: 0, #pkts verify: 0
          #pkts compressed: 0, #pkts decompressed: 0
          #pkts not compressed: 4, #pkts comp failed: 0, #pkts decomp failed: 0
          #pre-frag successes: 0, #pre-frag failures: 0, #fragments created: 0
          #PMTUs sent: 0, #PMTUs rcvd: 0, #decapsulated frgs needing reassembly: 0
          #send errors: 0, #recv errors: 0
          local crypto endpt.: 96.43.41.168/0, remote crypto endpt.: 67.231.37.42/0
          path mtu 1500, ipsec overhead 74, media mtu 1500
          current outbound spi: 6F98A015
          current inbound spi : 6DD466F0
        inbound esp sas:
          spi: 0x6DD466F0 (1842636528)
             transform: esp-aes-256 esp-sha-hmac no compression
             in use settings ={L2L, Tunnel, }
             slot: 0, conn_id: 1122304, crypto-map: samap
             sa timing: remaining key lifetime (kB/sec): (4374000/28182)
             IV size: 16 bytes
             replay detection support: Y
             Anti replay bitmap:
              0x00000000 0x00000001
        outbound esp sas:
          spi: 0x6F98A015 (1872273429)
             transform: esp-aes-256 esp-sha-hmac no compression
             in use settings ={L2L, Tunnel, }
             slot: 0, conn_id: 1122304, crypto-map: samap
             sa timing: remaining key lifetime (kB/sec): (4373999/28182)
             IV size: 16 bytes
             replay detection support: Y
             Anti replay bitmap:
              0x00000000 0x00000001
        Crypto map tag: samap, seq num: 2, local addr: 96.43.41.168
          access-list Barracudalab extended permit ip 192.168.1.0 255.255.255.0 192.168.3.0 255.255.255.0
          local ident (addr/mask/prot/port): (192.168.1.0/255.255.255.0/0/0)
          remote ident (addr/mask/prot/port): (192.168.3.0/255.255.255.0/0/0)
          current_peer: 67.231.37.45
          #pkts encaps: 0, #pkts encrypt: 0, #pkts digest: 0
          #pkts decaps: 0, #pkts decrypt: 0, #pkts verify: 0
          #pkts compressed: 0, #pkts decompressed: 0
          #pkts not compressed: 0, #pkts comp failed: 0, #pkts decomp failed: 0
          #pre-frag successes: 0, #pre-frag failures: 0, #fragments created: 0
          #PMTUs sent: 0, #PMTUs rcvd: 0, #decapsulated frgs needing reassembly: 0
          #send errors: 0, #recv errors: 0
          local crypto endpt.: 96.43.41.168/0, remote crypto endpt.: 67.231.37.45/0
          path mtu 1500, ipsec overhead 58, media mtu 1500
          current outbound spi: 51AF17EA
          current inbound spi : 859BC586
        inbound esp sas:
          spi: 0x859BC586 (2241578374)
             transform: esp-3des esp-sha-hmac no compression
             in use settings ={L2L, Tunnel, }
             slot: 0, conn_id: 1118208, crypto-map: samap
             sa timing: remaining key lifetime (sec): 28152
             IV size: 8 bytes
             replay detection support: Y
             Anti replay bitmap:
              0x00000000 0x00000001
        outbound esp sas:
          spi: 0x51AF17EA (1370429418)
             transform: esp-3des esp-sha-hmac no compression
             in use settings ={L2L, Tunnel, }
             slot: 0, conn_id: 1118208, crypto-map: samap
             sa timing: remaining key lifetime (sec): 28152
             IV size: 8 bytes
             replay detection support: Y
             Anti replay bitmap:
              0x00000000 0x00000001
    RitterBars# sh nat int inside
    Manual NAT Policies (Section 1)
    1 (inside) to (any) source static obj-192.168.1.0 obj-192.168.1.0   destination static obj-192.168.9.0 obj-192.168.9.0 no-proxy-arp
        translate_hits = 0, untranslate_hits = 0
    2 (inside) to (any) source static obj-192.168.1.0 obj-192.168.1.0   destination static obj-192.168.85.0 obj-192.168.85.0 no-proxy-arp
        translate_hits = 18, untranslate_hits = 0
    3 (inside) to (any) source static obj-192.168.1.0 obj-192.168.1.0   destination static obj-10.200.1.0 obj-10.200.1.0 no-proxy-arp
        translate_hits = 0, untranslate_hits = 0
    4 (inside) to (any) source static obj-192.168.1.0 obj-192.168.1.0   destination static obj-192.168.3.0 obj-192.168.3.0 no-proxy-arp
        translate_hits = 0, untranslate_hits = 0
    5 (inside) to (outside) source static obj-192.168.1.2 interface   service obj-tcp-source-eq-22 obj-tcp-source-eq-5922
        translate_hits = 0, untranslate_hits = 0
    6 (inside) to (outside) source static obj-192.168.1.10 interface   service obj-tcp-source-eq-5125 obj-tcp-source-eq-5125
        translate_hits = 0, untranslate_hits = 9094
    7 (inside) to (outside) source static obj-192.168.1.10 interface   service obj-tcp-source-eq-80 obj-tcp-source-eq-80
        translate_hits = 0, untranslate_hits = 126
    8 (inside) to (outside) source static obj-192.168.1.119 interface   service obj-udp-source-eq-69 obj-udp-source-eq-69
        translate_hits = 0, untranslate_hits = 0
    9 (inside) to (outside) source static obj-192.168.1.51 interface   service obj-tcp-source-eq-443 obj-tcp-source-eq-5980
        translate_hits = 0, untranslate_hits = 195
    10 (inside) to (outside) source static obj-192.168.1.114 obj-96.43.39.27 
        translate_hits = 0, untranslate_hits = 0
    11 (inside) to (CoreNetwork) source dynamic obj-192.168.1.0 interface   destination static obj-216.163.29.244 obj-216.163.29.244
        translate_hits = 107, untranslate_hits = 0
    12 (inside) to (outside) source dynamic Inside interface 
        translate_hits = 35387, untranslate_hits = 2940
    Manual NAT Policies (Section 3)
    1 (inside) to (outside) source dynamic any interface 
        translate_hits = 291, untranslate_hits = 78

    I just recently got the triple play package from verizon with fios too.  And of course the Actiontec is total crap.  The very first night it rebooted over and over again.  What good is an internet connection you can't use right... Anyways, I have a cisco 831 that i use for a VPN to work, and so, I decided to put that up front.
    Anyways, had the same problem.  First I setup my router to bridge the connetion from the Actiontec to my router.  So it goes Broadband Moca -> Actiontec LAN -(eth cable)-> Cisco WAN port.  This worked great, except now my vod didn't work.  So then I found this article....
    http://www.dslreports.com/forum/r19559467-How-To-MI424WR-Network-Bridge-working-FIOS-TV
    It was genius, add a second bridge from the Cisco LAN -(eth cable)-> Actiontec WAN -> local Moca.    And then put DHCP relay on the bridge.  Everything worked again, hooray.  then I added an access list, and there went my vod again. 
    So then I spent about two hours turning ports on and off and such, finally I figured it out.  You'll need to allow inbound established tcp connections that internal hosts create.  This will get back your guide and allow the vod menu to work again.  then you have to allow inbound connections on udp port 21310.  I applied it and lo and behold vod is back.  Now my only problem is that the 831 only has a 10 Mb/s ethernet WAN, so I can't get HD VOD but ah well.  I'll upgrade one of these days to an 851 or 871.
    Here's what the access lists should look like in IOS:
    permit tcp any host (your external IP address) established
    permit udp any host (your external IP address) eq 21310
    probably is going to be a little bit different since you have an ASA but I think you get the idea.

  • K8t neo fis2r - core center not functional after installing sound card

    Hi.  I had been using Core Center with Dynamic Overclocking enabled and all was well.  When idle, my amd64 3000+ (2.0ghz), was running at 800mhz.  Under load it would go up to 2100mhz.  But yesterday, I installed an Auzentech x-plosion sound card and after i installed the driver, the dynamic overclocking stopped working, my cpu is running at max all the time.  (The variable fan speed function still works). 
    I checked the IRQ and there is no conflict, I uninstalled the amd64 driver and core center and reinstalled.  Still does not work.  I uninstalled the auzentech driver, rebooted, and cancelled new hardware wizard.  Then the variable cpu frequency feature worked.  Once I install the driver for the auzentech, dynamic oc stops working.  I was thinking to try another pci slot but it appears to be a software issue rather than a hardware issue.  The new version of Core Center does not work with my board even though msi says it's compatible so I'm still using the one that always worked.  The amd driver is the latest and also always worked.
    Has anyone else had a similar problem, perhaps using the auzentech sound card with this board and Core Center?  Or does anyone have any suggestions?
    Thanks!
    K8T Neo FIS2R
    AMD64 3200
    AMI bios version 2.2
    1.5Gb pc3200 memory
    nvidia quadro FX 1100 128mb AGP
    Antec 430W ps

    Hey guys, I just went to AMDs site to get the dashboard utility mentioned and in the readme, it stated that in XP, the power option needs to be set to portable/laptop.  But in the past, I read that it needed to be set to "always on" and that it is, in fact, what I had it set to before when cool n quiet was working.  Now I change it to "portable/laptop" and it works and set to "always on" doesn't work anymore.  So now Core Center reports I'm at 33c @800mhz at no load.   I don't get it???  I'll have to try an alternate utility just to verify that is indeed working.
    btw, QV, I checked system properties, (right-click my computer > properties, or "system" in control panel) and on the "general" tab, it indicates an AMD64 3000+, 2.0GHz.  But I'm pretty certain the clock frequency is dropping now as reported by core center because of the decrease in the cpu temp at idle.  Am I looking in the right place in XP?  I have XP pro, SP2
    Again, thanks for the input and Happy New Year  

  • 5112 trig input does not function after selfcalibration ?

    After starting the selfcalibration on 5112, the Trig input seems not to function as before.
    This occurred after installation of a new driver "NI-SCOPE 2.90"
    Driver: NI-SCOPE 2.90, Model: NI PXI-5112, Compiler: MSVC 7.10, Engine: IVI 2.04, Compiler: MSVC 7.10, Components: VISA-Spec 3.00
    Can i revert to factory default ?
    Thanks in advance, John

    Correction !!
    This behavior was not caused by the driver installation but the trigger input has an 500mV accuracy.
    My signal was smaller then 500mVtt so the self calibration calibrated
    the levels of the trigger input somewhat different and my triggering
    was lost.
    Thats why my conclusion was wrong!!
    John

  • Weblogic not startng after configuring weblogic92 with soa-suite 10.1.3.4

    Configurig WebLogic 9.2 with soa-suite 10.1.3.4 .New domain has been created sucessfully.Wheh tried to start weblogic using command in
    C:\bea\user_projects\domains\SOADomain\bin
    Error comes :
    Provider javax.xml.stream.XMLInputFactory could not be instantiated:
    java.lang.InstantiationException
    javax.xml.stream.FactoryConfigurationError: Provider javax.xml.stream.XMLInputFactory could not be instantiated:
    java.lang.InstantiationException
    Please respond as it is becoming a stuck point in carrying out deployments

    Configurig WebLogic 9.2 with soa-suite 10.1.3.4 .New domain has been created sucessfully.Wheh tried to start weblogic using command in
    C:\bea\user_projects\domains\SOADomain\bin
    Error comes :
    Provider javax.xml.stream.XMLInputFactory could not be instantiated:
    java.lang.InstantiationException
    javax.xml.stream.FactoryConfigurationError: Provider javax.xml.stream.XMLInputFactory could not be instantiated:
    java.lang.InstantiationException
    Please respond as it is becoming a stuck point in carrying out deployments

  • Live Internet audio stream not functioning after iTunes 10.5.3 update

    Today my iTunes listed Internet audio stream for a local radio station will not play. i did perform the iTunes update for 10.5.3 3 days ago and the stream funcitoned then, but not today. Ugh. Any hints? Thanx everso!

    Try downloading the package for new installs. the update package failed, but the new install package worked for me without any trouble.
    History:
    I began this trouble shooting exercise by selecting Download Only through the Apple Update applet. Running the msi manually did not resolve the problem. In fact, it was more frustrating because the download package would disappear after running even though it failed, and I had to download it again. "Cleanup" I suppose. <frown>
    I followed advice to remove the Apple Software Update program, reboot and re-run the msi. That did not resolve the failure.
    I then followed advice to set permissions for Administrators on registry key HKLM\Software\Micorosoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Com ponents
    then reboot and run the update msi again. This also did not resolve the failure.
    I downloaded the installer from the Apple download site as though it were a fresh install, and - voila! - it installed correctly and all content and settings were preserved. Hopefully that is all that is needed, not the steps above. Let me know! http://www.apple.com/itunes/download/

Maybe you are looking for

  • MBP, Windex, and "seepage"

    Hi all, I cleaned the glossy screen of my (new) MBP yesterday using (non-ammonia) Windex. This has been a safe option on my Dell laptop, which also has a glossy screen. Unfortunately, the cleaner almost immediately seeped in behind the display and ha

  • G3 fails to respond to program disk(s)

    I have been operating between Classic 9.2.2 and OSX 10.1 with success for a long time. Attempted to install OSX 10.3 as this seemed to be the highest that one could install to get a large B/up USB drive running. Installation appeared to be successful

  • How to split shopping cart qty to create two PO

    Hello SRM guys Could you give me a tip to develop for this requirement? We use the classic scenario. My customer want to split shopping cart qty to create PO with different vendor. I know that buyer can change the shopping cart data in workarea. But

  • Numbering Files On Import

    When I import files, using an Aperture counter, it seems I only have two options. Pickup numbering where it left off, or reset back to 1. Is that true? I'd like to be able to add images to an existing Project using the same name and pick up where the

  • DW8 files not displayed properly in DW CS3

    Any help will be greatly appreciated in the following question: I've been using Dreamweaver 8 successfully in creating and maintaining several websites. However, when I try to use the newly purchased Dreamweaver CS3 on HTML files previously created o