Weblogic 10.3.3 Silent Install with registry corrupted message on Redhat 6.

I successfully un-installed Weblogic that had been installed previously on the VM. Then I created silent.xml on the VM and attempted to install WL in Silent Mode but got the following error
[root@VA33-PROOFAPP01 opt]# java -d64 -jar wls1033_generic.jar -mode=silent -silent_xml=/opt/scripts/silent.xml
Extracting 0%....................................................................................................100%
The local BEA product registry is corrupted. Please select another Middleware Home or contact Oracle Support
Here is my silent.xml which looks correct.
[root@VA33-PROOFAPP01 opt]# cat /opt/scripts/silent.xml
<?xml version="1.0" encoding="UTF-8"?>

<bea-installer>
<input-fields>
<data-value name="BEAHOME" value="/opt/oracleHome" />
<data-value name="WLS_INSTALL_DIR" value="/opt/oracleHome/weblogic10.3.3" />
<data-value name="COMPONENT_PATHS" value="WebLogic Server/Core Application Server|WebLogic Server/Administration Console|WebLogic Server/Configuration Wizard and Upgrade Framework|WebLogic Server/Web 2.0 HTTP Pub-Sub Server|WebLogic Server/WebLogic JDBC Drivers|WebLogic Server/Third Party JDBC Drivers|WebLogic Server/WebLogic Server Clients|WebLogic Server/WebLogic Web Server Plugins
|WebLogic Server/UDDI and Xquery Support|WebLogic Server/Server Examples|Oracle Coherence/Coherence Product Files" />
<data-value name="INSTALL_NODE_MANAGER_SERVICE" value="no" />
<data-value name="NODEMGR_PORT" value="5559" />
</input-fields>
</bea-installer>
Any inputs would be greatly appreciated.
Joe in South Carolina.

Well i read another thread and got it solved by putting the value on the same line
<data-value name="COMPONENT_PATHS"
value="WebLogic Server/Core Application Server|WebLogic Server/Administration Console|WebLogic Server/Configuration Wizard and Upgrade Framework|WebLogic Server/Web 2.0 HTTP Pub-Sub Server|WebLogic Server/WebLogic JDBC Drivers|WebLogic Server/Third Party JDBC Drivers|WebLogic Server/WebLogic Server Clients|WebLogic Server/WebLogic Web Server Plugins|WebLogic Server/UDDI and Xquery Support|WebLogic Server/Server Examples|Oracle Coherence/Coherence Product Files" />
Thanks for reading!
Joe

Similar Messages

Command Line Parameters for Silent Install with Status for BI4.0 Products

For the XI3.1 product installations, which clearly leveraged MSIEXEC installation files, it was possible to use the /qb+ command line parameter to trigger a silent install which showed the progress of the installation with a final prompt to acknowledge the completion of the installation.
For the new BI4.0 installation package, it's not clear how to trigger a silent installation which also shows the installation progress. The installation guide describes using -q in the command line to run a silent installation, or leveraging a response.ini file to trigger a silent install, but in neither case does it show how to modify the silent installation command to enable a display of the installation progress.
Does anyone know the syntax, either command line or embedded in a response.ini file, to trigger a silent installation for the BI4.0 products which ALSO shows the progress of the installations?
Thanks,
Josh

Yes, I've tried the same switch that I used for the XI3.1 installations, namely "/qb". In XI3.1 I was able to use this switch either directly in the MSIEXEC command line or in the Response.ini file as "QUIET=/qb". In either case, this switch resulted in a silent install that showed a progress bar window for the installation, completing with a confirmation prompt indicating that the installation had completed.
Neither approach works with the BI4.0 installation packages. My suspicion is that SAP has switched to a different installation engine as I can't find the typical .msi installation files that would indicate this is a MSIEXEC installation. I'm hoping someone knows what type of installation engine is being used and what the switching syntax is for silent installs. But it can't be a completely transparent silent install (I know how to do this); it must provide an option to show an installation progress bar.
Thanks,
Josh

Silent install with registration number

Is there a way to embed the registration number into the command line of a silent install for Crystal Reports 2008? That way users won't have to enter it after the install.

You can use the PIDKEY silent command line option.
I am pasting a snippet from page 27 the Crystal Report 2008 Install Guide pdf.
There is also a table of the most common command line switches available.
http://help.sap.com/businessobject/product_guides/cr2008/en/xir3_cr_install_en.pdf
=======================================================================
Command line silent installation
The silent installation command consists of the command setup.exe, followed
by a number of parameters that provide information about the installation.
The following example creates a sub-directory /Crystal Reports and installs
Crystal Reports into it:
setup.exe ADDLOCAL=ALL CLIENTLANGUAGE=<%langcode%> REBOOT=Re
allySuppress PIDKEY=<%keycode%> INSTALLDIR="C:\Program
Files\Business Objects" /qn
u2022 <%langcode%> Replace this variable with a valid language code from the
following table.
u2022 <%keycode%> Replace this variable with a valid product activation keycode.
The example uses the most common parameters. You can choose any
number of valid parameters, but it is good practice to keep the silent
installation as simple as possible.
========================================================================
--Jack

Silent install with WEB_JAVA_SECURITY_LEVEL=H does not appear to work

Oops - posted this in the wrong category after I landed there as a result of a search...
I have tried to install the jre-7u10-windows-i586.exe with flags: /s WEB_JAVA=1 WEB_JAVA_SECURITY_LEVEL=H but after it is installed, when opening the control panel, the web security level is set to Medium.
This can also be changed by a normal user. The setting is saved in the CURRENT_USER part of the registry. There appears to be no similar entry in LOCAL_MACHINE.
I would have expected when the installer option has been used (as admin), the setting would be HIGH for all users and the user would not be able to change it.
What is the problem?
OS is Windows XP with all patches.

I understand why you asked the question: It doesn't appear to be working as designed. ;)
I offered up what little I know in hopes of helping you solve the immediate problem of applying that setting. I wasn't trying to dance around the problem. :)
You are correct: it is a per-user setting. There are still a number of ways of getting per-user settings that out there:
- Via login script, as you suggested;
- Via GPO - Push the registry key(s) in this example;
- Via installs - add the registry key as part of the installation to HKCU; for any new user profiles: load the default user hive, add the key there & unload the hive. New profiles from that point on will be updated. You'll still need to do something for existing profiles. (Use one of the two options above for that.)
You added a new twist on this by mentioning a new element: the ability to lock the setting(s) so that users cannot change them. You'll likely need to leverage deployment configuration files to accomplish this. I don't think registry keys apply here, but I could be mistaken. Once the 'master' files are configured properly, they can be deployed via GPO, login script and even new installs.
Take a look at the documentation here, and if you still require some assistance, check back in.
http://docs.oracle.com/javase/7/docs/technotes/guides/deployment/deployment-guide/properties.html
The issue hasn't really 'solved itself' since users can still change the security level. The above will address that.

Silent install with completion prompt?

I would like to create application/package deployments that install silently, but will also prompt the user when the installation is done. I want these available through the Software Center.
My reason is pretty simple. I want to control all aspects of the installation process which is easy using silent installs. However, I would like the user to know when the install is done.
For something as simple as a JAVA runtime install, the user is often installing an update due to an incompatibility with a web site. Letting them know when the install is done allows them to try to web site again.

Hi GlennWelker
There are more than one way of doing this:
Either you can do this when you deploy the application, making sure users have an installation deadline, and then showing them all notifications.
Otherwise you can do it in your installation, this way you need some way of showing it. You can build something to do this yourself, or you can use some of the Things which is out there to do this:
http://psappdeploytoolkit.codeplex.com/releases/view/110492
/Morten

Silent install with net assistant failing

I am installing an 8.1.6 custom config with an response file. The config assistant is erroring. I can't figure out how to pass the netca.rsp to the config assistant. Any suggestions?
This is the input to the install,
myinstall.rsp
[General]
RESPONSEFILE_VERSION=1.7.0.0.0
[SESSION]
FROM_LOCATION = "C:\newstage4\sqlnet816\stage\products.jar"
ORACLE_HOME = "C:\oracle\ora81"
ORACLE_HOME_NAME = "OHOME1"
TOPLEVEL_COMPONENT={"oo4o.group","1.0.0.0"}
SHOW_COMPONENT_LOCATIONS_PAGE = False
SHOW_CUSTOM_TREE_PAGE = True
SHOW_SUMMARY_PAGE = False
SHOW_INSTALL_PROGRESS_PAGE = True
SHOW_REQUIRED_CONFIG_TOOL_PAGE = False
SHOW_OPTIONAL_CONFIG_TOOL_PAGE = False
SHOW_END_SESSION_PAGE = False
[oo4o.group_1.0.0.0]
COMPONENT_LANGUAGES={"en"}
INSTALL_TYPE = "custom"
DEPENDENCY_LIST={"oracle.networking.netca","8.1.6.0.0"}
[oracle.networking.netca_8.1.6.0.0]
OPTIONAL_CONFIG_TOOLS={"netca"}
s_responseFileName=C:\download\oracle\cd817\response\netca.rsp
This is the output from net config:
silentinstall.log
silentInstall2002-08-14_04-14-41-PM.log
Configuration tool Net8 Configuration Assistant failed
Parsing command line arguments:
Parameter "orahnam" = OHOME1
Parameter "instype" = custom
Parameter "inscomp" = client,net8
Parameter "insprtcl" = nmp,tcp
Parameter "cfg" = local
Parameter "authadp" = NO_VALUE
Parameter "nodeinfo" = NO_VALUE
Parameter "responsefile" = NO_VALUE
Parameter "silent" = true
Done parsing command line arguments.
Error loading native library: oranjni8.dll.
java.lang.UnsatisfiedLinkError: jniGetOracleHome
     at oracle.net.common.NetGetEnv.getOracleHome(NetGetEnv.java)
     at oracle.net.ca.CmdlineArgs.setOraArgs(CmdlineArgs.java)
     at oracle.net.ca.NetCA.<init>(NetCA.java)
     at oracle.net.ca.NetCA.main(NetCA.java)
Error :*** Alert: One or more tools have failed. It is recommended but not required that these tools succeed for this installation. You can now select these tools, read its details to examine why they failed, fix those problems, and retry them. Or, you can click "Next" to continue. ***
The installation of oo4o group was successful, but some optional configuration tools failed or were cancelled

Hi i am facing the same problem. If you got the solution please reply for the same or mail me on [email protected]

Silent Install - Invalid Serial Number Message

I have been attempting to install this product silently for a Corporate environment. Inserting the serial number into Abcpy.ini and then Installing using "msiexec /i components.msi /qb!" works in our virtual test environment. But when installed onto the customers test machine it throws up an error message upon launch saying the serial number is invalid.
This has become an extremely frustating exercise.
Q. What is being checked that causes the serial number error message? If it is looking for a particular registry key or file - what is that so I can fix it?
The package only works as expected when performing a completely manual install - which is useless for a corporate environment rollout.

There are a couple of things to say about this; the first is that because it's clearly an installation problem, you are entitled to direct Adobe free support to fix it, and the second is an observation. I don't know how relevant it is, but I seem to recall that when you install Audition manually, you can't copy and paste anything into the registration boxes at all - it's as if the functionality has been disabled specifically. How, or even whether, this would affect a silent installation I'm not sure - but it sounds like the sort of thing that might!
I must admit that I'm also slightly intrigued about what a silent rollout does about product activation. Do individual stations have to do this manually?

Silent Install w/Admin and Managed Servers

I noticed on versions 11 and 12 of Weblogic, it seems the parameters available for a silent install have been greatly simplified to where it just does a base install. How would I go about getting it to do a silent install with an Admin server and 2 Managed servers? Do I need to do an install and update-install or is there a way I can do all this in 1 shot?
Thanks In Advance
Nic

An example is given here: Middleware Snippets: Automate WebLogic 12.1.2 Deployment.

OBIEE 1.1.1.7 upgrade -silent install

Hi All,
I am installing OBIEE 1.1.1.7 as an upgrade from version 1.1.1.6 I have upgraded weblogic to version 10.3.6 and used psa.sh to upgrade both schemas,
I am now trying to run config.sh as a silent install with a response file. I just cant get it to work in with Oracle linix 6.3 it doesnt recognise my paths to WL or Oracle_BI, can a response file be used with a linux installation? Ive tried adding both ' quotes and " around the locations hoping the installer would take them as one string but still no luck,
See response file
[ENGINE]
#DO NOT CHANGE THIS.
Response File Version=1.0.0.0.0
[GENERIC]
#Set this to true if you want to create a new BI System, all other required variables need to be provided. If this is set to true then variables "SCALEOUT_BISYSTEM" and "EXTEND_BISYSTEM" must be set to false, since the variables are mutually exclusive.
CREATE_BISYSTEM=false
#Set this to true if you want to scale out an existing BI System, all other required variables need to be provided. If this is set to true then variables "CREATE_BISYSTEM","EXTEND_BISYSTEM" and "UPDATE_BIDOMAIN" must be set to false, since the variables are mutually exclusive. In order to scale out an existing BI system, the domain in the system must be running
SCALEOUT_BISYSTEM=false
#Set this to true if you want to configure BI System in an existing exmpty domain in the localhost, all other required variables need to be provided. If this is set to true then variables "CREATE_BISYSTEM","SCALEOUT_BISYSTEM" and "UPDATE_BIDOMAIN" must be set to false, since the variables are mutually exclusive.
EXTEND_BISYSTEM=false
#Set this to true if you want to update an existing BI System running on the localhost, all other required variables need to be provided. If this is set to true then variables "CREATE_BISYSTEM","EXTEND_BISYSTEM" and "SCALEOUT_BISYSTEM" must be set to false, since the variables are mutually exclusive.
UPDATE_BIDOMAIN=true
#Write the name of the domain you want to create. Domain name may only contain alphanumeric characters, or the underscore (_) or hyphen (-) characters.
DOMAIN_NAME=bifoundation_domain
#Write the name of the cell you want to create. Cell name may only contain alphanumeric characters, or the underscore (_) or hyphen (-) characters.
CELL_NAME=unknown
#Write the name of the host to which you want to connect. It should have an already existing domain configured.
DOMAIN_HOSTNAME=localhost
#Give the port number at which the host should be connected.
DOMAIN_PORT=7001
#Give an administrator user name for the domain if you are creating a new one otherwise give the administrator user name for the domain configured at the host.
ADMIN_USER_NAME=weblogic
#Give an administrator password for the domain if you are creating a new one otherwise give the administrator password for the domain configured at the host.
ADMIN_PASSWORD=Velos123
#Write the administrator password again to confirm.
ADMIN_CONFIRM_PASSWORD=Velos123
#Is Single Server Install.
WLS_SINGLE_SERVER_INSTALL=false
#Specify the Middleware Home location.
MW_HOME=/home/OBIEE/MW_HOME
#Give the name of the Oracle Home directory. The Oracle Home directory name may only contain alphanumeric , hyphen (-) , dot (.) and underscore (_) characters, and it must begin with an alphanumeric character.
ORACLE_HOME=/home/OBIEE/MW_HOME/Oracle_BI1
#Give the complete path to a valid WebLogic Server Home.
WEBLOGIC_HOME=/home/OBIEE/MW_HOME/wlserver_10.3
#Give the complete path for a domain home to be created.
DOMAIN_HOME_PATH=/home/OBIEE/MW_HOME/user_projects/domains/bifoundation_domain
#Domain Name
DOMAIN_NAME=bifoundation_domain
#Give the complete path for JEE applications directory to be created.
APPLICATIONS_HOME_PATH=unknown
#Give the complete path for an Oracle Instance directory to be created. This is the location where the software configuration files and runtime processes will reside.
INSTANCE_HOME=/home/OBIEE/MW_HOME/instances/instance1
#Give a name for Oracle Instance corresponding to the Instance Home. The Oracle Instance name may only contain alphanumeric and underscore (_) characters, it must begin with an alphabetic (a-z or A-Z) character, and must be from 4 to 30 characters in length.
INSTANCE_NAME=instance1
[SYSTEM]
[APPLICATIONS]
[RELATIONSHIPS]

You need the Combo Update to go from 10.7.1 to 10.7.4.

Switch to install with progress bar ONLY!

I have successfully installed Photoshop CS3 onto Windows XP SP2. However, I do not want my install to be completely silent: I want to see a progress bar.
For silent install I use the following switch: setup.exe --mode=silent
The next line in cmd says"UI:Silent"
If I use no switches (only type in setup.exe), the next line in cmd is: "UI:Full" Also, "setup.exe --mode=gui" will initiate "UI:Full".
What are other install switches? I want a silent install with a progress bar only.

We too are in the same boat, we need a progress bar so that our users know that we are deploying the application.
I've tried various random switch for the "UI mode" but none work. There must be others than silent or Full.

Adobe Dreamweaver CS3 Silent Install

I have followed adobe's instructions on how to perform a
silent install with the preserialization built in to the silent
install. I recieve an exit code 6 when trying to use the
Application Override file that Adobe has provided. Any
suggestions?

Mike.Yates wrote:
> I contacted Adobe support and the guy asked me to post
on the forum because
> they dont "really support silent install". He stated
that the developers check
> the forums quiet often and they might be able to assist.
Hmm. That sounds a rather lame response. Not your fault, of
course, but
if Adobe gives instructions for silent install, their
technical support
people should be able to provide you with assistance. I'll
try to draw
this to someone's attention to see if you can get an answer.
David Powers, Adobe Community Expert
Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

Silent install hanging

Hi, I'm using iAS 6.0 SP1B and iWS 4.1 SP8 on Solaris 8. I am having a
slight problem with the silent install feature. When I run the silent
install, it works correctly however it seems to hang at the very end. I get
the iWS startup message and it says it's listening on port 80 but then it
just seems to freeze. If i kill the silent install at that point everything
is fine, it's just that I'm writing a wrapper script that does some
modifications to the kjs script after the install so this freeze messes
things up. I have tried running the silent install with iWS running
previously and with it shut down previously; same result either way. Has
anyone experienced this problem or know what to do?
Thanks,
Lincoln

Hi Lincoln,
Please send me your install.inf file.
thanks,
Deepak
devsupport
Lincoln wrote:
Hi, I'm using iAS 6.0 SP1B and iWS 4.1 SP8 on Solaris 8. I am having a
slight problem with the silent install feature. When I run the silent
install, it works correctly however it seems to hang at the very end. I get
the iWS startup message and it says it's listening on port 80 but then it
just seems to freeze. If i kill the silent install at that point everything
is fine, it's just that I'm writing a wrapper script that does some
modifications to the kjs script after the install so this freeze messes
things up. I have tried running the silent install with iWS running
previously and with it shut down previously; same result either way. Has
anyone experienced this problem or know what to do?
Thanks,
Lincoln

Silent install- ASM Configuration Assistant fails

I am trying to do a silent install with response file. At the end of the install it says I need to run configToolAllCommands which I do but the ASM Configuration assistant fails. I assume I need to pass in asmsnmp password but how do I do that? I see I can specify ResponseFile=<fn> when I run configToolAllCommands but how do I set the asm passwords in a response file? I tried just creating a response file that included asmsnmpPassword=mypassword and sysAsmPassword=mypassword but it didn't like that. Anyone know how to pass in the password? I think it will set up the asmsnmp user in this configuration assistant? because that is one of my problems after the install completes I don't have that user set up. I need all of this to be automated.
thanks for any ideas.

well I did not find any documentation on how to create a resposne file for the ConfigToolAllCommands- all I found using the -help option was that I could include a ResponseFile=<fn> parameter. so all I did was put 2 llines in the file sysAsmPassword=mypassword and asmsnmpPassword=pAssword. And that doesn't work...

[Oracle8.1 Client] Silent install

Hye,
Trying to make a silent install with Oracle8.1 Client, the goal is to build an MSI package who installs client automatically. I think my clientcustom.rsp is good, but when I launch the command :
C:\Program Files\Oracle\oui\install>setup.exe -responseFile "C:\Response\oracle.swd.Custom.rsp" -silent
There is no effect. If I remove silent option, OUI launchs, but dont take in order parameters who are in custom.rsp...
Other thing, to make a silent install install of Oracle8.1, it is obligatory to have OUI installed on computer ?
The other problem is I have to integrate tnsnames.ora and sqlnet.ora in installation.
So what would be the best solution for realize that ? Thanks in advance.
Message was edited by:
user593366
Message was edited by:
user593366
Message was edited by:
user593366

Thanks in advance.
Anyway I see a strange thing :
- I launch the command C:\Program Files\Oracle\oui\install>setup.exe -record -DestinationFile "C:\Response\oracle.rsp" . OUI launch correctly.
- But after install, I don't see oracle.rsp file created.
- In Silent mode, I launch "C:\Program Files\Oracle\oui\install>setup.exe -responsefile C:\clientminiresponse.
rsp"
- In Logs, I see "Installation use oracle.rsp file".
- But the Installer don't use values which are in oracle.rsp file. It seems that it takes in order only oraparam.ini.
Message was edited by:
user593366
Message was edited by:
user593366
Message was edited by:
user593366

Settings Dependencies Registry Corrupted

I was trying to fix some issues with the power management Metro app, and I tried to install the Settings Dependencies driver downloaded directly from Lenovo's website. I did not uninstall the version that was already installed, and it seems that that caused the registry for the driver to be corrupt. Now Solution Center is telling me Lenovo PM Device is disabled, which Device Manager says is because of registry problems.
Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)
I have tried uninstalling then deleting the registries in HKLM\System\CurrentControlSet\Control\Class\{[deviceGUID]} and then reinstalling, but the registry issue is still there.
Can somebody offer some insight?

Hey there Huzuodian,
Have you tried using the system restore function to get back to a point prior to the install and registry corruption? By restoring back before this, the registry will be reset to what it was at that time.
This article on Microsoft Windows site than can give some insight on the different recovery processes that may provide some options. Hope this helps.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

Weblogic 10.3.3 Silent Install with registry corrupted message on Redhat 6.

Similar Messages

Maybe you are looking for