Weblogic 10.3 : Work manager is not getting assigned to a application

Hi,
i have assigned a work manager to an application in weblogic-application.xml and able to see that under Deployments
-> Application name -> Configuration -> Workload tab of weblogic console.
But while starting server get a warning as
<Dec 17, 2008 9:45:16 AM IST> <Warning> <WorkManager> <BEA-002919> <Unable to find a WorkManager with name RealWorkManager. Dispatch policy RealWorkManager will map to the default WorkManager for the application SmpMain>
Can some one help me out how to assign a work manager to a application.
Thanks,
Smita

Thanks for your help.
When i created a work manager from Deployments -> Configuration -> Workload -> New and the new Work Manager appears in the Application-Scoped Work Managers table. But was not able to see that in Monitering -> Workload Work managers table. Why is that so?
Regards,
Smita

Similar Messages

"disp+work" process in not getting started after kernel upgradation

Hello Experts,
Good day…..,
I am new to SAP. I installed SAP ECC6 EHP4 with default kernel version 701 and it was working fine.
I have upgraded kernel version from 701 to 741, but the “disp+work” process is not getting started after kernel upgrade.
I have posted “dev_W0” log &
“disp+work” command result obtained in CMD prompt of respective server.
Please help me out in this. Thanks all in advance.
“dev_w0” Log”
trc file: "dev_w0", trc level: 1, release: "741"
* ACTIVE TRACE LEVEL           1
* ACTIVE TRACE COMPONENTS      all, MJ
M sysno      55
M sid        TNG
M systemid   562 (PC with Windows NT)
M relno      7410
M patchlevel 0
M patchno    42
M intno      20020600
M make multithreaded, Unicode, 64 bit, optimized
M profile D:\usr\sap\TNG\SYS\profile\TNG_DVEBMGS55_ABTHMSSB01
M pid        2392
M
M
M Wed Jul 23 02:04:35 2014
M kernel runs with dp version 208000(ext=117000) (@(#) DPLIB-INT-VERSION-208000-UC)
M length of sys_adm_ext is 500 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 2392) [dpInit.c 731]
M DpCommonParamInit: rdisp/core_file_size = default --> no change
I MtxInit: 30000 0 0
M
M Wed Jul 23 02:04:36 2014
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: alloate/attach shared memory (mode=ATTACH)
M DpShMCreate: sizeof(wp_adm)                         24288    (1104)
M DpShMCreate: sizeof(tm_adm)                          51472080             (256080)
M DpShMCreate: sizeof(ca_adm)                           432000 (72)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/7464064/7583152
M DpShMCreate: sizeof(comm_adm)                   7583152                (14904)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm)                      0              (296)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm)                         0              (80)
M DpSockTableSize: max/headSize/ftSize/tableSize=500/16/520064/520080
M DpShMCreate: sizeof(sock_adm)                       520080 (1016)
M DpShMCreate: sizeof(vmc_adm)                       0              (3208)
M DpShMCreate: sizeof(wall_adm)                        (ft=41664/fi=67472/hd=64/rec=192)
M DpShMCreate: sizeof(amc_rec_adm)                              (ft=86464/fi=67472/hd=64/rec=416)
M DpShMCreate: sizeof(websocket_adm)                         (ft=28864/hd=64/rec=272)
M DpShMCreate: sizeof(gw_adm)          64
M DpShMCreate: sizeof(j2ee_adm)       3936
M DpShMCreate: SHM_DP_ADM_KEY                  (addr: 00000000103D0050, size: 60433936
M DpShMCreate: allocated sys_adm at 00000000103D0250
M DpShMCreate: allocated wp_adm_list at 00000000103E20F0
M DpShMCreate: allocated wp_adm at 00000000103E2410
M DpShMCreate: allocated tm_adm_list at 00000000103E84F0
M DpShMCreate: allocated tm_adm at 00000000103E8730
M DpShMCreate: allocated ca_adm at 00000000134FF000
M DpShMCreate: allocated comm_adm at 0000000013568980
M DpShMCreate: system runs without slock table
M DpShMCreate: allocated sock_adm at 0000000013CA4130
M DpShMCreate: allocated vmc_adm_list at 0000000013D232C0
M DpShMCreate: system runs without VMC
M DpShMCreate: allocated gw_adm at 0000000013D23560
M DpShMCreate: allocated j2ee_adm at 0000000013D237A0
M DpShMCreate: allocated ca_info at 0000000013D24900
M DpShMCreate: allocated wall_adm (ft) at 0000000013D24B40
M DpShMCreate: allocated wall_adm (fi) at 0000000013D2F000
M DpShMCreate: allocated wall_adm (head) at 0000000013D3F990
M DpShMCreate: allocated amc_rec_adm (ft) at 0000000013D3FBD0
M DpShMCreate: allocated amc_rec_adm (fi) at 0000000013D54F90
M DpShMCreate: allocated amc_rec_adm (head) at 0000000013D65920
M DpShMCreate: allocated websocket_adm (ft) at 0000000013D65B60
M DpShMCreate: allocated websocket_adm (head) at 0000000013D6CE20
M DpShMCreate: initialized 21 eyes
M DpCommAttachTable: attached comm table (header=0000000013568980/ft=0000000013568990/fi=0000000013C86E10)
M DpSockAttachTable: attached sock table (header=0000000013CA4130/ft=0000000013CA4140)
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X <ES> EsILock: use Semphore 33 for locking
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X
X Wed Jul 23 02:04:37 2014
X mm.dump: set maximum dump mem to 96 MB
M ThStart: taskhandler started
M ThInit: initializing DIA work process W0
M
M Wed Jul 23 02:04:44 2014
M ThInit: running on host ABTHMSSB01
I MtxInit: 0 0 0
M
M Wed Jul 23 02:04:45 2014
M calling db_connect ...
B Loading DB library 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' is "741.10", patchlevel (0.42)
C Prepending D:\usr\sap\TNG\DVEBMGS55\exe to Path.
C Register application info.
C
C Wed Jul 23 02:04:47 2014
C Oracle client version: 10.2.0.4.0, (dbsl 741 040714, UNICODE[2])
C Detailed Oracle client (patch) info not available.
C *** ERROR => Connect via SAPUSER not supported for kernel >= 740.
[dbsloci.c    2406]
C     Only Secure Connect method possible.
M ***LOG R19=> ThDbConnect, db_connect ( DB-Connect 000256) [thDatabase.c 76]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step TH_INIT, thRc ERROR-DB-CONNECT_ERROR, action STOP_WP, level 1) [thxxhead.c   2281]
M Wed Jul 23 02:04:48 2014
M
M Info for wp 0
M
M    pid = 2392
M    severity = 0
M    status = 0
M    stat = WP_NEW
M    waiting_for = NO_WAITING
M    workerType = DP_WORKER_DIAWP
M    act_cs_count = 0
M    csTrack = 0
M    csTrackRwExcl = 0
M    csTrackRwShrd = 0
M mode_cleaned_counter = 0
M    control_flag = 0
M    report = > <
M    action = 0
M    tab_name = >                              <
M
M ThIErrHandle: no current incoming request
M
M
M *****************************************************************************
M *
M * LOCATION SAP-Server ABTHMSSB01_TNG_55 on host ABTHMSSB01 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Wed Jul 23 02:04:48 2014
M * RELEASE 741
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 16797709
M * MODULE D:/depot/bas/741_REL/src/krn/si/th/thxxhead.c
M * LINE 2470
M * COUNTER 1
M *
M *****************************************************************************
M
M PfRejectStatistic: clear statistic record
M PfClearAllRec: clear statistic area
M PfClearAllRec: statRecordAction = STAT_RECORD_ACTION_REJECT
M Entering TH_CALLHOOKS
M ThCallHooks: call hooks for event BEFORE_DUMP
M ThIErrHandle: entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workp. 0 2392) [dpnttool.c 335]
“Desp+Work” Command result:
C:\Users\tngadm>disp+work
disp+work information
kernel release 741
kernel make variant 741_REL
compiled on NT 6.0 6002 x86 MS VC++ 16.00 for NTAMD64
compiled for                  64 BIT
compilation mode UNICODE
compile time Jul 9 2014 16:39:46
update level 0
patch number 42
source id 0.042
RKS compatibility level 0
supported environment
database (SAP, table SVERS) 700
710
701
702
703
                              711
720
730
731
732
738
740
operating system
Windows NT 5.1
Windows NT 5.2
Windows NT 6.0
Windows NT 6.1
Windows NT 6.2
Windows NT 6.3
C:\Users\tng

C *** ERROR => Connect via SAPUSER not supported for kernel >= 740.
[dbsloci.c    2406]
C     Only Secure Connect method possible.
For this issue you need to set up SSFS.
1639578 - SSFS as password storage for primary database connect
I am new to SAP. I installed SAP ECC6 EHP4 with default kernel version 701 and it was working fine.
I have upgraded kernel version from 701 to 741
Are you sure kernel 741 is compatible with an EHP 4 system ?
Read this SAP note
1969546 - Release Roadmap Kernel 740
Regards
RB

HT1338 I have macbook without a firewire port, I have usb 2.0 port, now my os is not working I can not get through apple logo loading , I can not enter safe mode, I can only enter one user mode, how can I backup my data, I have very important data in my h

I have macbook without a firewire port, I have usb 2.0 port, now my os is not working I can not get through apple logo loading , I can not enter safe mode, I can only enter one user mode, how can I backup my data, I have very important data in my hdd

Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

Products not getting assigned to product catlog

Hi,
I am learning crm and needed your advice on product catlog.
My products are not getting assigned to product catlog (both automatic as well as manual).
There are 2 queries related to creation of sub area -
1) I wanted to know, what comes in Cat Area type - ie does it remains blank or something is assigned to it?
2) When I enter my product ID under item overview, the errors comes as product 0000..510010 does not have data for sales management.
Please advice me on above 2 queries.
Thanking you in advance.
Regards.
Edited by: Rachna Adani on Jun 28, 2009 7:04 PM

1) I wanted to know, what comes in Cat Area type - ie does it remains blank or something is assigned to it?
Catalog area is a kind of categorization or grouping or hierarchy in a catalog. For example, if yuo are creating a catalog for a super market, then Clothes, Groceries, Toys etc. could be Cat. Areas. With in a catalog area one can define more sub-areas - for example, in Toys, you can have sub-areas either by Age 5-10, Age 11-15 etc or by Brand. This is the case of manual assignment. In case of *automatic assignment, the catalog area and sub-ares will be part of the Product hierarchy.
All you need is a definition for the Catalog Areas. You need to assign products only if there are any in that area or sub-area.
2) When I enter my product ID under item overview, the errors comes as product 0000..510010 does not have data for sales management.
Did you download them from ERP system? Then you must download the Sales Org data. In the same token, if you have created this product in CRM, then you should maintain the sales data tab,

New user creation in AE- user group not getting assigned

Hi All,
Here is a typical case, wherein when we create a new user with AE for the production system, the user gets created and the roles are also assigned but the user group is not getting assigned. The user group is being fetched from a table from the backend and all that is working fine. Infact in order to test the configurations we even created a new user in the production instance of AE giving the development system as the target system for user creation and in this case the user was successfully created and the user group is also assigned. The problem is arising only when the target system is production system.
Connectors are all working fine, but we are unable to think of a reason. Can somebody help us on this?

Hi Vani,
If you are provisioning the user group using user defaults, check that production system is selected in the user defaults configured. Configuration -> user defaults. You can define any user default system, but for perticuticular user defaults that is applicable define all the systems, in which you want user defaults to be provisioned.
Kind Regards,
Srinivasan

Purchase order output type NEU is not get assigned automatically

Dear All,
when i am creting purchase order the output type NEU is not get assigned automatically.
I have maintained message condn record for NEU and for specific PO doc type NB.
same problame i was facing for the inventory docuemnts but i was resolved by running one SAP std program so please guide me if any such program is available for Purchasing documents also or any other setting i am missing to make.
Pl suggest
Regards,
Vimlesh

Hi
Please check the following in customization.Dont check in NACE you may miss something like fine tune control
1) Check the Message determination procedure is having the NEU output type
2) Check the std Message determination procedure is assigned to PO
3) Check the output type for the Access sequence, default data for transmission medium and partner function VN, Language & Form assigned to it
4) Check the Access sequence for the condition tables
5) Check the condition record in MN04/MN05
6) Check the purchasing group has printer assignement
7) Check the fine tuen control for operation 1 & 2 for message type.
Hope your problem now solved.
Thanks /karthik
Edited by: Karthik on Aug 13, 2009 5:29 PM

"Could not get needed resources for application to be launched (id=-669)"

I keep getting this message
Setup Resourses Status
Could not get needed resources for application [App name. edir path] to
be launched (id=-669).
Problem: Unable to connect to server [server name]
I am able to browse to the server no problem as well as map a drive
directly to it?
I am not sure why I am getting this ?

This is under the "Environment" portion of the "Run Tab"
Craig Wilson - MCNE, MCSE, CCNA
Novell Support Forums Volunteer Sysop
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared either Novell or any rational human.
<[email protected]> wrote in message
news:[email protected]...
> Craig where do I to determine that? I know it has to run as admin but I
> am not sure if it is set like that...
>
>> Is the application configured to run "Normal", "Secure System User", or
>> "Unsecure System User".
>>
>> Methods #2 and #3 require the workstation not the user to have rights
> and
>> require the use of UNC instead of a mapped drive.
>>
>> --
>> Craig Wilson - MCNE, MCSE, CCNA
>> Novell Support Forums Volunteer Sysop
>>
>> Novell does not officially monitor these forums.
>>
>> Suggestions/Opinions/Statements made by me are solely my own.
>> These thoughts may not be shared either Novell or any rational human.
>>
>> <[email protected]> wrote in message
>> news:[email protected]...
>> > It is associated with the user and I can get access to the exe via
> their
>> > PC using their login
>> >
>> >> ,
>> >> > Could not get needed resources for application [App name. edir
> path]
>> > to
>> >> > be launched (id=-669).
>> >> >
>> >> > Problem: Unable to connect to server [server name]
>> >> >
>> >> > I am able to browse to the server no problem as well as map a drive
>> >> > directly to it?
>> >> >
>> >> -669 is "wrong password" IIRC. Is this app associated to user or WS,
> ie
>> > is
>> >> t trying to access that path wth the User's or Workstation's
>> > credentials?
>> >>
>> >> - Anders Gustafsson, Engineer, CNE6, ASE
>> >> NSC Volunteer Sysop
>> >> Pedago, The Aaland Islands (N60 E20)
>> >>
>> >> Novell does not monitor these forums officially.
>> >> Enhancement requests for all Novell products may be made at
>> >> http://support.novell.com/enhancement
>> >>
>> >> Using VA 5.51 build 315 on Windows 2000 build 2600
>> >>
>> >
>>
>>
>

Urgent help req : work item id not getting passed in the method

Hi ,
I have created a subtype zcats of business object CATS and delegated it .
I have created a new method Approve1 ( with attributes SYNCRONUS & DIALOG ) in zcats which is similar in coding to Approve method of CATS ( DIALOG) .
I have include the method Approve1 of business object zcats in a standard task .
The problem is that when the eorkflow gets triggered , the workitem id is not getting passed in the method APProve1 of zcats.
Can someone please help me with this .
Points would surely be awarded .

BEGIN_METHOD APPROVE1 CHANGING CONTAINER.
DATA: WORKITEMID_IMP LIKE OBJECT-KEY-ITEMID.
DATA: WI_CHCKWI LIKE SWWWIHEAD-WI_ID.
DATA: WORKITEM TYPE SWC_OBJECT.
   <u> WORKITEMID_IMP = OBJECT-KEY-ITEMID</u>.
    SWC_GET_ELEMENT CONTAINER '_WORKITEM' WORKITEM.
    SWC_GET_PROPERTY WORKITEM 'WorkitemReference' WI_CHCKWI.
    IF SY-SUBRC EQ 0 AND NOT WI_CHCKWI IS INITIAL.
      WORKITEMID_IMP = WI_CHCKWI.
    ENDIF.
    CALL FUNCTION 'CATS_WF_APPROVAL'
      EXPORTING
        WORKITEMID_IMP = WORKITEMID_IMP
      TABLES
        CONT_IMP = CONTAINER.
END_METHOD.
hi ,
the above is the code in the method .
At the first step of execution underlined above , the work item id is appearing blank .
I think that the value is not passed to the container , but i am not sure og how to pass data to this conatiner

Solution Manager does not get service definitions from SAP in self diagnosi

Hi,
In our production solution manager transaction solution_manager, self diagnosis we are getting a warning message on our development solution manager.
Solution Manager XXX does not get service definitions from SAP.
The production Solution Manager is the master in SDCCN for the test Solution Manager. In the test Solution Manager, the scheduled task REFRESH SERVICE DEFINITIONS has task System ID of O01. It is pointed to RFC destination SDCC_OSS, not the production Solution Manager system.
It gives the same warning if I point the task to the production Solution Manager system.
Has anyone seen this before? Any ideas?
Best regards,
Russ

Hi,
i guess have you activated SDCCN from your solution manager system too?
if not please activate. since that setup helps solman retrive the service definitions used in SDCCN from SAP (SAPOSS).so this ultimately allows you to set solution manager system as Master, so all the satellite system get the service definition from solman and do not need a direct SAPOSS connection.
and Please check this Note 1143775 - SAP service content update
the wiki for trouble shoot ["EarlyWatch Alert is Red Flagged - how to resolve" |http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=228262728]
please check.
Thanks,
Jansi

Group title in Floor plan manager is not getting transported to quality

HI Experts,
In Component Configuration "EHHSS_INC_REC_NRM_QAF_V3_BSCI", I have added group and gave title to that group in development.
The group is getting transported when I release request but the title is not getting transported.
Could anyone help me, it's urgent.
Thanks and Regards,
Santhoshi.

posting again,
Can anyone help me as this is urgent requirement.
With Regards,
Santhoshi

Lync RSG Hunt Group not working as expected, not getting calls on lync clients

I have created an Hunt Group in Lync. When i dial the number i do get the welcome message but after that it does not get forwarded to the test user which is configured in the Group. (Created a Queue and selected the group here and assigned this to the workflow)
Error on Lync report:
Request: BYE Response: 200
Diagnostic ID: 26029 Category: Unexpected
Component: Response Group application
Reason:
Call is disconnected because of invalid configuration.
Description:
Call is disconnected because of invalid configuration.
Error in Event Viewer:
The workflow runtime encountered a critical error.
Failure occurrences: 8, since 4/17/2012 7:47:14 AM.
The last encountered error was from a workflow with the display name: TestRG, the URI: sip:[email protected], and the GUID: 810c628c-d0c5-4b31-b8d5-f61595def5b0
Suhas

HI,
Do you deploy standard lync server or enterprise lync server?
If enterprise lync server, please log in SQL server and search the rgsdyn--dbo.ActiveFEInstance. Please check you can find the FE server FQDN and the port 8404 in this table.
Please running the Lync server logging tool on the FE server to find why the Response Group can not transfer the calls to the agent.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Sap BO Disclosure Management "Could not get Chapter:Connection" Error

Dear Gurus,
When i try to View/Edit and download from netweaver to client, i am taking error like this ;
2/27/2014 3:17:44 PM Start
2/27/2014 3:17:44 PM frec:http://bw01.vektora.com:90/WebServices/WDocumentService.asmx|0|7|wt1nko55j2ylzw45xjfjia45
2/27/2014 3:17:44 PM Action received:frec:http://bw01.vektora.com:90/WebServices/WDocumentService.asmx|0|7|wt1nko55j2ylzw45xjfjia45
2/27/2014 3:17:46 PM Getting chapter:Connecting...
2/27/2014 3:17:46 PM Could not get Chapter:Connection with 'http://bw01.vektora.com:90/WebServices/WDocumentService.asmx' failed:
Also screen shot is attached,
Could you please help guys ?
Regards
Kemal

Dear Gurus,
When i try to View/Edit and download from netweaver to client, i am taking error like this ;
2/27/2014 3:17:44 PM Start
2/27/2014 3:17:44 PM frec:http://bw01.vektora.com:90/WebServices/WDocumentService.asmx|0|7|wt1nko55j2ylzw45xjfjia45
2/27/2014 3:17:44 PM Action received:frec:http://bw01.vektora.com:90/WebServices/WDocumentService.asmx|0|7|wt1nko55j2ylzw45xjfjia45
2/27/2014 3:17:46 PM Getting chapter:Connecting...
2/27/2014 3:17:46 PM Could not get Chapter:Connection with 'http://bw01.vektora.com:90/WebServices/WDocumentService.asmx' failed:
Also screen shot is attached,
Could you please help guys ?
Regards
Kemal

BPM 7.2 Tasks not getting assigned to user UWL

Hi All,
I am on CE7.2 and downlaoded NWDS for the same.
I follwed Donka Dimitrova's article to create a BPM process (name, age) application. I had earlier tried it on CE 7.11 and it worked fine. But now on CE7.2 when I initiate the process from /nwa, the first user (user assigned to the very first task) doesnt get it in UWL. I .looked into nwa and It seems like the tasks itself are not getting created because there are no tasks under "Manage Tasks" option.
Is there some configuration missing.
Note: I have assigned tasks to users in the Process in IDE and EP-BPEM UWL configuration is done.
Prem

hi,
have you run the configuration wizard?
http://yourhost:port/nwa/cfg-wizard
there is a task for BPM. just execute it.
if you have already run the wizard, you can go to following place to check and make further change if required.
http://yourhost:port/nwa/sys-config
select "Applications" tab
put "bpembaseear" in the name filter, select that application in the result table
you will see the properties tab
if your locale is not there, you can fix now.
Best regards,
John

Css file not getting applied to the application

Hi All,
I have uploaded a css file and used in my application as
<link rel="stylesheet" href="#WORKSPACE_IMAGES#default.css" type="text/css"/>
Previously it was working fine.
But suddenly, it is not working.
I am working from a remote server.
Could anyone please get me a solution for this?
thanks in advance
bye
Srikavi

Hi joel,
From this thread
Shared Files - problems after upgrading APEX 3.0 to 3.1
i have taken your words,
In my development of the browser cache support for static files, I did notice some unexplainable behavior with IE and Firefox. When uploading static files and then testing them, it almost seemed like the browser would request the resource only some of the time (and then get the HTTP 304). If an Expires tag is not computed, I know Firefox will compute one itself.
As per my understanding, Is it cache_expire should be calculated?
I could not get that line.Could you please explain me.
Thanks in advance.
bye
Srikavi.

EA2700 router not getting assigned IP address via DHCP

I'm helping my mom (remotely) set up her new EA2700 router to replace her old Linksys WRT160N router. It is currently connected to a Motorola 6121 cable modem. She also has Charter cable modem service. FYI, the WRT160N is currently working albeit it is dropping connections and losing connections from time to time. That's why she purchased this new router.
I'm trying to help her set it up manually. Unfortunately, she does not have a laptop computer. She does have an iPad and Android phone, but nothing that would allow her to connect a device with a CD to the router that would allow her to do a CD based setup. Thus, we're trying to do a manual setup.
She is able to login to the router using Safari by connecting to 192.168.1.1 so I think the basic stuff is set up properly and all the wires are connected properly. She is able to get into the main setup page. I've helped her compare the setup of the current (EA2700) router to her old WRT160N router - this took quite a while - and essentially everything is set up similarly between the old and new router. Internet connection type is set to "Automatic Configuration - DHCP." Unfortunately, the router doesn't seem to be able to get assigned an IP address from Charter. When she goes to the Status page, no IP addresses are listed. She has also clicked on both the release IP and renew IP buttons, both with no effect. She has tried power cycling both the cable modem and router, but not luck. What's going on? I see another user may have a similar issue:
http://homecommunity.cisco.com/t5/Wireless-Routers/EA2700-DHCP-reservations/m-p/561986?comm_cc=HSus&...
What can we do to fix this issue?

If mac clone is enabled, the address that it will clone is usually the mac address of the computer that can get online directly to the modem. Or it’s possible that the cable modem is only recognizing the MAC address of the old router. You may enabling MAC Address clone and clone the MAC address of the old router.

Weblogic 10.3 : Work manager is not getting assigned to a application

Similar Messages

Maybe you are looking for