Weblogic 5.1 sp3 with Apache or Stronghold on Solaris 2,7

Hi All,
We are planning to use Apache or Stronghold(most probably Stronghold as it
supports SSL which I was told Apache does not support) and WebLogic 5.1 sp
3. Has anyone used this combination before if so we would like to know if
you have faced any integration issues with this ? If you do what kind of
integration issues were they ? Just connection related or scalability
related ? Has anyone used WebLogic built-in webservevr in production
environment ? How does it scale up ?
Thanks
Prasad

Would you please let me know when exactly(date) the sp4 was released
Thanks,
Ravi.
Vinod Mehra <[email protected]> wrote:
Checkout the 510 service pack 4. It has these binaries:
1. mod_wl.so for standard Apache (non EAPI) installations
2. mod_wl_ssl.so for Apache + SSL/EAPI installations(Stronghold, modssl etc)
3. mod_wl_ssl_raven.so for Apache + Raven installations
mod_wl_ssl_raven.so was required because Raven applies frontpage patches which
makes it incompatible with mod_wl_ssl.so
--Vinod.
Filip Hanik wrote:
Apache supports SSL with two implementations
1. http://www.apache-ssl.org/
2. Apache with OpenSSL (mod_ssl)
On Solaris there are no problems integrating weblogic and Apache.
I would not recommend using the weblogic web server, the performance of image
streaming and serving static webpages is not the greatest - apache will do a
much better job for you.
Weblogic also has a plug in for apache on Solaris that supports fail over. ie.
if one of your weblogic server goes down then apache can reconnect to another
one
Filip Hanik
[email protected]
In article <396a70f4$[email protected]>,
[email protected] says...
Hi All,
We are planning to use Apache or Stronghold(most probably Stronghold as it
supports SSL which I was told Apache does not support) and WebLogic 5.1 sp
3. Has anyone used this combination before if so we would like to know if
you have faced any integration issues with this ? If you do what kind of
integration issues were they ? Just connection related or scalability
related ? Has anyone used WebLogic built-in webservevr in production
environment ? How does it scale up ?
Thanks
Prasad

Similar Messages

Weblogic 5.1 SP3 and Apache 1.3.12 Config Question

Hello;
Can someone tell me how I might make this configuration work? I'm trying to
run multiple Weblogic Process on one box and 1 Apache Process on another
box. I would like to utilize the "VirtualHosting by name" via the HTTP1.1
protocol and use the weblogic plugin.
*** HTTPD.CONF FILE ***
LoadModule weblogic_module libexec/mod_wl.so
<VirtualHost 1stVirtual.host.com>
<Location /weblogic>
SetHandler weblogic-handler
PathTrim weblogic
</Location>
<Location /servletimages>
SetHandler weblogic-handler
Pathtrim something
</Location>
<IfModule mod_weblogic.c>
Include conf/1stVirtual.conf
</IfModule>
</VirtualHost>
<VirtualHost 2ndVirtual.host.com>
<Location /weblogic>
SetHandler weblogic-handler
PathTrim weblogic
</Location>
<Location /servletimages>
SetHandler weblogic-handler
Pathtrim something
</Location>
<IfModule mod_weblogic.c>
Include conf/2ndVirtual.conf
</IfModule>
</VirtualHost>
AddModule mod_weblogic.c
*** 1stVIRTUAL.CONF File ****
WebLogicHost 1stVirtual.host.com
WebLogicPort 7003
When I try to call the website:
http://1stVirtual.host.com/weblogic/ I get this:
Failure of WebLogic APACHE bridge:
Neither WebLogicCluster nor WebLogicHost parameter was specified in
httpd.conf. Cannot continue.
Anyhelp would be greatly appreciated.
-Bob
P.S.- My Configuration is as follows:
WEBLOGIC SERVER
Solaris 2.6
Weblogic 5.1 SP3
APACHE SERVER
Solaris 2.6
Apache 1.3.12

Bob:
Fixed in SP 4. Out very, very soon.
mbg
In article <3969eabe$[email protected]>, [email protected] says...
Hello;
Can someone tell me how I might make this configuration work? I'm trying to
run multiple Weblogic Process on one box and 1 Apache Process on another
box. I would like to utilize the "VirtualHosting by name" via the HTTP1.1
protocol and use the weblogic plugin.
SNIP
When I try to call the website:
http://1stVirtual.host.com/weblogic/ I get this:
Failure of WebLogic APACHE bridge:
Neither WebLogicCluster nor WebLogicHost parameter was specified in
httpd.conf. Cannot continue.
Anyhelp would be greatly appreciated.
-Bob--
==================================================
NewsGroup Rant
==================================================
Rant 1.
The less info you provide about your problem means
the less we can help you. Try to look at the
problem from an external perspective and provide
all the data necessary to put your problem in
perspective.

Sun One 6.0 SP3 with JDK1.3.1_08 on Solaris crashing.

Hi,
We are using Sun One 6.0 SP3 with JDK 1.3.1_08 on Solaris 2.8. We are seeing these error messages in the log file.
[11/Sep/2003:17:41:16] catastrophe ( 436): Server crash detected (signal SIGSEGV)
[11/Sep/2003:17:41:16] info ( 436): Crash occurred in function __0fLPollManagerNAddConnectionR6KConnectionUi from module /package/iplanet60sp3/bin/https/lib/libns-httpd40.so
[11/Sep/2003:17:41:25] info ( 1671): successful server startup
[11/Sep/2003:17:41:25] info ( 1671): iPlanet-WebServer-Enterprise/6.0SP3 B05/18/2002 02:30
[11/Sep/2003:17:41:26] info ( 1672): Installing a new configuration
[18/Sep/2003:18:24:14] catastrophe ( 4209): Server crash detected (signal SIGSEGV)
[18/Sep/2003:18:24:14] info ( 4209): Crash occurred in function __0fLPollManagerNAddConnectionR6KConnectionUi from module /package/iplanet60sp3/bin/https/lib/libns-httpd40.so
[18/Sep/2003:18:35:24] info ( 4334): successful server startup
[18/Sep/2003:18:35:24] info ( 4334): iPlanet-WebServer-Enterprise/6.0SP3 B05/18/2002 02:30
[18/Sep/2003:18:35:25] info ( 4335): Installing a new configuration
[24/Sep/2003:09:04:02] catastrophe ( 5384): Server crash detected (signal SIGBUS)
[24/Sep/2003:09:04:02] info ( 5384): Crash occurred in NSAPI SAF NSServletService
[24/Sep/2003:09:04:02] info ( 5384): Crash occurred in function PListFindValue from module /package/iplanet60sp3/bin/https/lib/libns-httpd40.so
[24/Sep/2003:09:04:52] failure ( 5383): Child process admin thread is shutting down
[24/Sep/2003:09:04:54] info ( 5489): Installing a new configuration
[24/Sep/2003:09:59:42] catastrophe ( 5556): Server crash detected (signal SIGSEGV)
[24/Sep/2003:09:59:42] info ( 5556): Crash occurred in function PR_AtomicDecrement from module /package/iplanet60sp3/bin/https/lib/libatomic.so
[24/Sep/2003:09:59:55] info ( 5650): successful server startup
[24/Sep/2003:09:59:55] info ( 5650): iPlanet-WebServer-Enterprise/6.0SP3 B05/18/2002 02:30
[24/Sep/2003:09:59:56] info ( 5651): Installing a new configuration
[24/Sep/2003:10:11:16] catastrophe ( 5651): Server crash detected (signal SIGSEGV)
[24/Sep/2003:10:11:16] info ( 5651): Crash occurred in function __0fLPollManagerNAddConnectionR6KConnectionUi from module /package/iplanet60sp3/bin/https/lib/libns-httpd40.so
[24/Sep/2003:10:12:40] info ( 5697): successful server startup
[24/Sep/2003:10:12:40] info ( 5697): iPlanet-WebServer-Enterprise/6.0SP3 B05/18/2002 02:30
[24/Sep/2003:10:12:41] info ( 5698): Installing a new configuration
[25/Sep/2003:12:59:45] catastrophe ( 6666): Server crash detected (signal SIGSEGV)
[25/Sep/2003:12:59:45] info ( 6666): Crash occurred in function __0fLPollManagerNAddConnectionR6KConnectionUi from module /package/iplanet60sp3/bin/https/lib/libns-httpd40.so
[25/Sep/2003:12:59:56] info ( 7052): successful server startup
[25/Sep/2003:12:59:56] info ( 7052): iPlanet-WebServer-Enterprise/6.0SP3 B05/18/2002 02:30
[25/Sep/2003:12:59:58] info ( 7053): Installing a new configuration
[30/Sep/2003:09:27:22] catastrophe ( 8117): Server crash detected (signal SIGSEGV)
[30/Sep/2003:09:27:22] info ( 8117): Crash occurred in function __0fLPollManagerNAddConnectionR6KConnectionUi from module /package/iplanet60sp3/bin/https/lib/libns-httpd40.so
[30/Sep/2003:09:28:29] info ( 8135): successful server startup
[30/Sep/2003:09:28:29] info ( 8135): iPlanet-WebServer-Enterprise/6.0SP3 B05/18/2002 02:30
[30/Sep/2003:09:28:30] info ( 8136): Installing a new configuration
[30/Sep/2003:09:35:27] catastrophe ( 8136): Server crash detected (signal SIGSEGV)
[30/Sep/2003:09:35:27] info ( 8136): Crash occurred in function __0fLPollManagerNAddConnectionR6KConnectionUi from module /package/iplanet60sp3/bin/https/lib/libns-httpd40.so
[30/Sep/2003:09:39:08] info ( 8170): successful server startup
[30/Sep/2003:09:39:08] info ( 8170): iPlanet-WebServer-Enterprise/6.0SP3 B05/18/2002 02:30
[30/Sep/2003:09:39:09] info ( 8171): Installing a new configuration
[08/Oct/2003:09:20:37] catastrophe ( 9529): Server crash detected (signal SIGSEGV)
[08/Oct/2003:09:20:37] info ( 9529): Crash occurred in NSAPI SAF NSServletService
[08/Oct/2003:09:20:37] info ( 9529): Crash occurred in function PListFindValue from module /package/iplanet60sp3/bin/https/lib/libns-httpd40.so
[08/Oct/2003:09:21:33] failure ( 9528): Child process admin thread is shutting down
[08/Oct/2003:09:21:35] info (10419): Installing a new configuration
Any help will be highly appreciated.
Thnks
Jawwad.

Hi,
We are seeing these error messages in the server log file.
[02/Apr/2004:11:29:27] catastrophe (27585):      Server crash detected (signal SIGSEGV)
[02/Apr/2004:11:29:27] info (27585):      Crash occurred in function JVM_Close from module /usr/j2se/jre/lib/sparc/libjvm.so
[02/Apr/2004:11:29:28] failure (27578):      Child process admin thread is shutting down
[02/Apr/2004:11:29:33] info (28360):      Installing a new configuration
any one help this error..
how to solve this bug.
thanks
jeba

Clustering weblogic portal 10.3 with apache plugin

Hi,
we have configured a weblogic portal 10.3 cluster with two managed servers. We are using the apache 2.2 plugin module for dispatching.
It seems for us that the plugin is not working correctly. It dispatches all request only to one server (we have tested it from different client machines). When we kill one of the managed servers the plugin dispatches to the other server which is correct.
In our test case we have produced a lot of load with two jmeter instances from two machines. All requests are dispachted to one managed server. After the first server runs in an out of memory, the plugin dispachted to the second managed server until this runs also in an out of memory. Therefor we have no real load balancing.
Here is our httpd.conf configuration:
<VirtualHost 149.191.201.135:80>
ServerName localhost
# ServerAlias adportal adportal.eu.xxx.com
RewriteEngine on
RewriteRule ^/$ /adp_war/appmanager/ad01/ad01 [R]
LimitRequestBody 12582912
CustomLog "|d:/apache/bin/rotatelogs.exe d:/apache/logs/adportal_access.log 864000" common
<IfModule mod_weblogic.c>
WeblogicCluster sis26.eu.xxx.com:8031,sis27.eu.xxx.com:8031
MatchExpression *.jsp
MatchExpression *.do
MatchExpression *.portal
MatchExpression *.htm
MatchExpression *.html
MatchExpression *.jpg
MatchExpression *.gif
ConnectTimeoutSecs 300
ConnectRetrySecs 1
MaxPostSize 12582912
SecureProxy Off
Debug ON
WLLogFile d:/apache/debug/global_proxy.log
WLTempDir "d:/apache/debug\temp"
DebugConfigInfo On
</IfModule>
<Location ~ "/adp_war/(appmanager|portals|portlets|resources|showImage|ShowBinary|framework)">
SetHandler weblogic-handler
</Location>
</VirtualHost>
Has anyone an idea?
By the way we have also tested it with the apache 2.0 plugin which also isn't working.

Hi,
Were do we set the listen address.
Even we have the same problem. I have one physical that has the admin server and manager server and other server with just the manager server.
We have the apache proxy server infront of these clustered server. Our server goes down very frequently even without activity.
Some time we get the following error but some time there is no exception in the logs.
####<Nov 6, 2009 10:05:57 PM CST> <Error> <WebLogicServer> <abc.abc.com> <OIM_SERVER1> <[ACTIVE] ExecuteThread: '12' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1257566757265> <BEA-000337> <[STUCK] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)' has been busy for "634" seconds working on the request "weblogic.servlet.internal.ServletRequestImpl@2c88d39[
POST /spmlws/OIMProvisioning HTTP/1.1
SOAPAction: http://xmlns.oracle.com/OIM/provisioning/processRequest
Content-Type: text/xml; charset="UTF-8"
User-Agent: OIM AD Pwd Sync/1.0
Content-Length: 1313
Connection: Keep-Alive
]", which is more than the configured time (StuckThreadMaxTime) of "600" seconds. Stack trace:
Thread-18 "[STUCK] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'" <alive, in native, suspended, priority=1, DAEMON> {
java.io.FileOutputStream.writeBytes(FileOutputStream.java:???)
java.io.FileOutputStream.write(FileOutputStream.java:260)
java.io.BufferedOutputStream.write(BufferedOutputStream.java:100)
^-- Holding lock: java.io.BufferedOutputStream@214ef14[thin lock]
java.io.PrintStream.write(PrintStream.java:428)
^-- Holding lock: java.io.PrintStream@214ed9e[thin lock]
sun.nio.cs.StreamEncoder.writeBytes(StreamEncoder.java:191)
sun.nio.cs.StreamEncoder.implFlushBuffer(StreamEncoder.java:271)
sun.nio.cs.StreamEncoder.implFlush(StreamEncoder.java:276)
sun.nio.cs.StreamEncoder.flush(StreamEncoder.java:120)
^-- Holding lock: java.io.OutputStreamWriter@19de784[thin lock]
java.io.OutputStreamWriter.flush(OutputStreamWriter.java:212)
org.apache.log4j.helpers.QuietWriter.flush(QuietWriter.java:49)
org.apache.log4j.WriterAppender.subAppend(WriterAppender.java:292)
org.apache.log4j.WriterAppender.append(WriterAppender.java:147)
org.apache.log4j.AppenderSkeleton.doAppend(AppenderSkeleton.java:201)
^-- Holding lock: org.apache.log4j.ConsoleAppender@19de688[thin lock]
org.apache.log4j.helpers.AppenderAttachableImpl.appendLoopOnAppenders(AppenderAttachableImpl.java:50)
org.apache.log4j.Category.callAppenders(Category.java:181)
^-- Holding lock: org.apache.log4j.spi.RootCategory@19de3c9[fat lock]
org.apache.log4j.Category.forcedLog(Category.java:372)
org.apache.log4j.Category.error(Category.java:300)
com.thortech.util.logging.Logger.error(Unknown Source)
com.oracle.xl.spmlws.framework.logger.OraLogger.log(Unknown Source)
com.oracle.xl.spmlws.ws.server.weblogic.OIMProvisioningImpl.processRequest(Unknown Source)
sun.reflect.NativeMethodAccessorImpl.invoke0(NativeMethodAccessorImpl.java:???)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:27)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:575)
weblogic.webservice.component.javaclass.JavaClassInvocationHandler.invoke(JavaClassInvocationHandler.java:127)
weblogic.webservice.core.handler.InvokeHandler.handleRequest(InvokeHandler.java:75)
weblogic.webservice.core.HandlerChainImpl.handleRequest(HandlerChainImpl.java:141)
weblogic.webservice.core.DefaultOperation.process(DefaultOperation.java:542)
weblogic.webservice.server.Dispatcher.process(Dispatcher.java:200)
weblogic.webservice.server.Dispatcher.doDispatch(Dispatcher.java:140)
weblogic.webservice.server.Dispatcher.dispatch(Dispatcher.java:53)
weblogic.webservice.server.WebServiceManager.dispatch(WebServiceManager.java:100)
weblogic.webservice.server.servlet.WebServiceServlet.serverSideInvoke(WebServiceServlet.java:299)
weblogic.webservice.server.servlet.ServletBase.doPost(ServletBase.java:417)
weblogic.webservice.server.servlet.WebServiceServlet.doPost(WebServiceServlet.java:286)
javax.servlet.http.HttpServlet.service(HttpServlet.java:700)
javax.servlet.http.HttpServlet.service(HttpServlet.java:815)
weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:224)
weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:108)
weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:198)
weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3468)
weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:308)
weblogic.security.service.SecurityManager.runAs(Unknown Source)
weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2116)
weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2038)
weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1372)
weblogic.work.ExecuteThread.execute(ExecuteThread.java:198)
weblogic.work.ExecuteThread.run(ExecuteThread.java:165)
>
<[STUCK] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)' has become "unstuck".>
####<Nov 6, 2009 10:11:48 PM CST> <Info> <ServletContext-/xlWebApp> <abc.abc.com> <OIM_SERVER1> <[ACTIVE] ExecuteThread: '23' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1257567108507> <BEA-000000> <action: LogonAction: User 'XELSYSADM' logged on in session jJ2bK0zdx4LPTScXWRMG3jznSQgQsJKqC4YSpMlJ3Q4KCRrGYM9l!-1225252524!NONE!1257567101565>
####<Nov 6, 2009 10:11:01 PM CST> <Info> <ServletContext-/xlWebApp> <abc.abc.com> <OIM_SERVER1> <[ACTIVE] ExecuteThread: '20' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1257567061835> <BEA-000000> <action: LogonAction: User 'XELSYSADM' logged on in session T23kK0ncSs60YfLnZRhpdZDvmL8sq1QQlc7vMLQJSpVQFyvSMvD6!-1225252524!NONE!1257565852875>
####<Nov 6, 2009 10:11:14 PM CST> <Info> <ServletContext-/xlWebApp> <abc.abc.com> <OIM_SERVER1> <[ACTIVE] ExecuteThread: '19' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1257567074087> <BEA-000000> <action: LogonAction: User 'XELSYSADM' logged on in session T23kK0ncSs60YfLnZRhpdZDvmL8sq1QQlc7vMLQJSpVQFyvSMvD6!-1225252524!NONE!1257565852875>
####<Nov 6, 2009 10:12:47 PM CST> <Info> <WebLogicServer> <abc.abc.com> <OIM_SERVER1> <[STUCK] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1257567167000> <BEA-000339> <[STUCK] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)' has become "unstuck".>
####<Nov 6, 2009 10:12:47 PM CST> <Info> <WebLogicServer> <abc.abc.com> <OIM_SERVER1> <[STUCK] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1257567167003> <BEA-000339> <[STUCK] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)' has become "unstuck".>
####<Nov 6, 2009 10:12:47 PM CST> <Info> <WebLogicServer> <abc.abc.com> <OIM_SERVER1> <[STUCK] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1257567167009> <BEA-000339> <[STUCK] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' has become "unstuck".>
####<Nov 6, 2009 10:12:47 PM CST> <Info> <WebLogicServer> <abc.abc.com> <OIM_SERVER1> <[STUCK] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1257567167019> <BEA-000339> <[STUCK] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)' has become "unstuck".>
####<Nov 6, 2009 10:12:47 PM CST> <Info> <WebLogicServer> <abc.abc.com> <OIM_SERVER1> <[STUCK] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1257567167022> <BEA-000339> <[STUCK] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)' has become "unstuck".>
####<Nov 6, 2009 10:12:47 PM CST> <Info> <WebLogicServer> <abc.abc.com> <OIM_SERVER1> <[STUCK] ExecuteThread: '8' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1257567167033> <BEA-000339> <[STUCK] ExecuteThread: '8' for queue: 'weblogic.kernel.Default (self-tuning)' has become "unstuck".>
####<Nov 6, 2009 10:12:47 PM CST> <Notice> <WebLogicServer> <abc.abc.com> <OIM_SERVER1> <Thread-1> <<WLS Kernel>> <> <> <1257567167043> <BEA-000388> <JVM called WLS shutdown hook. The server will force shutdown now>
####<Nov 6, 2009 10:12:47 PM CST> <Alert> <WebLogicServer> <abc.abc.com> <OIM_SERVER1> <Thread-1> <<WLS Kernel>> <> <> <1257567167048> <BEA-000396> <Server shutdown has been requested by <WLS Kernel>>
####<Nov 6, 2009 10:12:47 PM CST> <Notice> <WebLogicServer> <abc.abc.com> <OIM_SERVER1> <Thread-1> <<WLS Kernel>> <> <> <1257567167058> <BEA-000365> <Server state changed to FORCE_SUSPENDING>

WebLogic 10.3.5 with Apache Connector Config

Hi,
I have multiple apache/OHS running on the same HP-UX machine and am running into following issue in deploying SOA Processes on the second server.
deploy/sca_AIAErrorTaskAdministrationProcess_rev1.0.jar
[deployComposite] INFO: Creating HTTPS connection to host:soaa.eprod.com, port:443
[deployComposite] INFO: Received HTTP response from the server, response code=500
[deployComposite] SEVERE: Invalid logging line: <HTML>
[deployComposite] SEVERE: Invalid logging line: <HEAD>
[deployComposite] SEVERE: Invalid logging line: <TITLE>Weblogic Bridge Message
[deployComposite] SEVERE: Invalid logging line: </TITLE>
[deployComposite] SEVERE: Invalid logging line: </HEAD>
[deployComposite] SEVERE: Invalid logging line: <BODY>
[deployComposite] SEVERE: Invalid logging line: <H2>Failure of server APACHE bridge:</H2><P>
[deployComposite] SEVERE: Invalid logging line: <hr>Cannot open TEMP post file '/tmp/_wl_proxy/_post_17020_6' for POST of 72775 bytes
[deployComposite] SEVERE: Invalid logging line: <hr> </BODY>
[deployComposite] SEVERE: Invalid logging line: </HTML>
[deployComposite] SEVERE: Invalid logging line: <HTML>
[deployComposite] SEVERE: Invalid logging line: <HEAD>
[deployComposite] SEVERE: Invalid logging line: <TITLE>Weblogic Bridge Message
[deployComposite] SEVERE: Invalid logging line: </TITLE>
[deployComposite] SEVERE: Invalid logging line: </HEAD>
[deployComposite] SEVERE: Invalid logging line: <BODY>
[deployComposite] SEVERE: Invalid logging line: <H2>Failure of server APACHE bridge:</H2><P>
[deployComposite] SEVERE: Invalid logging line: <hr><PRE>Internal Server failure, APACHE plugin. Cannot continue.</PRE>
[deployComposite] SEVERE: Invalid logging line: <hr> </BODY>
[deployComposite] SEVERE: Invalid logging line: </HTML>
[deployComposite] ---->response code=500, error:nullI read on this post "http://www.techpaste.com/2012/04/open-temp-post-file-tmp_wl_proxy_post_21626_12548-apache/" to define the WLTempDir directive on each Apache / OHS installation to point to different directories so they do not conflict.
As it's a clustered environment so wanted to find out where should I put the below properties
WLLogFile
WLTempDir
I have configuration file in which the virtual host and other URLs are configured and then have included this file in httpd.conf. Want to find out where to enter the above 2 values in the below snippet
<VirtualHost *:8888>
        ServerName ebs.uat.com
        RewriteEngine On
        RewriteOptions inherit
<IfModule ossl_module>
   AddCertHeader HTTPS
   SimulateHttps On
</IfModule>
        <Location /weblogic>
                SetHandler weblogic-handler
                WebLogicHost ebscon.uat.com
    # Admin Server's port
                WeblogicPort 7007
        </Location>
        <Location /console>
                SetHandler weblogic-handler
                WebLogicHost ebscon.uat.com
                WeblogicPort 7007
        </Location>
        <Location /consolehelp>
                SetHandler weblogic-handler
                WebLogicHost ebscon.uat.com
                WeblogicPort 7007
        </Location>
        <Location /em>
                SetHandler weblogic-handler
                WebLogicHost ebscon.uat.com
                WeblogicPort 7007
        </Location>
        <Location /wsm-pm>
                SetHandler weblogic-handler
                WebLogicCluster ebscon1.uat.com:7017,ebscon2.uat.com:7017
        </Location>
# SOA Suite
        <Location /soa-infra>
                SetHandler weblogic-handler
                WebLogicCluster ebscon1.uat.com:8007,ebscon2.uat.com:8007
        </Location>
        <Location /integration/>
                SetHandler weblogic-handler
                WebLogicCluster ebscon1.uat.com:8007,ebscon2.uat.com:8007
        </Location>
        <Location /b2bconsole>
                SetHandler weblogic-handler
                WebLogicCluster ebscon1.uat.com:8007,ebscon2.uat.com:8007
        </Location>
        <Location /soa/composer>
                SetHandler weblogic-handler
                WebLogicCluster ebscon1.uat.com:8007,ebscon2.uat.com:8007
        </Location>
# BAM
<Location /OracleBAM>
                SetHandler weblogic-handler
    # WebLogicCluster PREFIXbam-web1.eprod.com:WLS_BAM1 port,host 2 from environment table:WLS_BAM2 port
                WebLogicCluster ebscon1.uat.com:9007,ebscon2.uat.com:9007
        </Location>
# BPM
<Location /bpm/composer>
      SetHandler weblogic-handler
      WebLogicCluster ebscon1.uat.com:8007,ebscon2.uat.com:8007
</Location>
<Location /bpm/workspace>
      SetHandler weblogic-handler
      WebLogicCluster ebscon1.uat.com:8007,ebscon2.uat.com:8007
</Location>
# OSB
<Location /sbinspection.wsil*>
   SetHandler weblogic-handler
   WebLogicCluster ebscon1.uat.com:4017,ebscon2.uat.com:4017
</Location>
<Location /sbresource*>
   SetHandler weblogic-handler
   WebLogicCluster ebscon1.uat.com:4017,ebscon2.uat.com:4017
</Location>
<Location /sbconsole>
   SetHandler weblogic-handler
   WebLogicHost ebscon.uat.com
                 WeblogicPort 7007
</Location>
# AIA
<Location /AIA>
    SetHandler weblogic-handler
    WebLogicCluster ebscon1.uat.com:8007,ebscon2.uat.com:8007
</Location>
</VirtualHost>Do I need to enter WLTempDir and WLLogFile values under each <Location tag i.e.
<Location /AIA>
    SetHandler weblogic-handler
    WebLogicCluster ebscon1.uat.com:8007,ebscon2.uat.com:8007
    WLLogFile /tmp/server1
    WLTempDir /tmp/server1
</Location>Any help is appreciated.
Thanks

If you want to have only one log file for all the virtual hosts configured in your environment, you can achieve it using global properties. Instead of specifying the same Debug, WLLogFile and WLTempDir properties in each virtual host you can specify them just once in the <IfModule> tag
Sample httpd.conf file:
<IfModule mod_weblogic.c>
WebLogicCluster johndoe02:8005,johndoe:8006
Debug           ON
WLLogFile c:/tmp/global_proxy.log
WLTempDir "c:/myTemp"
DebugConfigInfo On
KeepAliveEnabled ON
KeepAliveSecs 15
</IfModule>
Please refer to the below link for more information:-
http://docs.oracle.com/cd/E15051_01/wls/docs103/plugins/apache.html
-Sandeep

Please Help!! Weblogic 8.1.4 with apache 2.0.55 SSL

Using Windows for Apache and Weblogic
I see Client----Apache, Apache to Server, Server to Apache, but Apache to client failing
Fri Feb 24 15:39:40 2006 *******Exception type [WRITE_ERROR_TO_CLIENT] raised at line 650 of ap_proxy.cpp
I have seen many posts where people have seen this but no solutions or responses saying whats the problem or what is the solution?
Can anyone please respond thanks
uday
================New Request: [â‚¬b] =================
Fri Feb 24 15:39:40 2006 INFO: SSL is configured
Fri Feb 24 15:39:40 2006 SSL Main Context not set. Calling InitSSL
Fri Feb 24 15:39:40 2006 INFO: Initializing SSL library
Fri Feb 24 15:39:40 2006 Loaded 1 trusted CA's
Fri Feb 24 15:39:40 2006 INFO: Successfully initialized SSL
Fri Feb 24 15:39:40 2006 INFO: SSL configured successfully
Fri Feb 24 15:39:40 2006 The final request string is '/'
Fri Feb 24 15:39:40 2006 Host extracted from serverlist is [localhost]
Fri Feb 24 15:39:40 2006 Initializing lastIndex=0 for a list of length=1
Fri Feb 24 15:39:40 2006 getListNode: created a new server node: id='localhost:7002' server_name='ukamath.eideawdc1.local', port='80'
Fri Feb 24 15:39:40 2006 attempt #0 out of a max of 5
Fri Feb 24 15:39:40 2006 general list: trying connect to '127.0.0.1'/7002/7002 at line 2592 for '/'
Fri Feb 24 15:39:40 2006 New SSL URL: match = 0 oid = 22
Fri Feb 24 15:39:40 2006 Connection refused, error = 10022
Fri Feb 24 15:39:40 2006 Setting peerID for new SSL connection
Fri Feb 24 15:39:40 2006 7f00 0001 5a1b 0000 ....Z...
Fri Feb 24 15:39:40 2006 Local Port of the socket is 2206
Fri Feb 24 15:39:40 2006 Remote Host 127.0.0.1 Remote Port 7002
Fri Feb 24 15:39:40 2006 general list: created a new connection to '127.0.0.1'/7002 for '/', Local port:2206
Fri Feb 24 15:39:40 2006 URL::sendHeaders(): meth='â‚¬b' file='/' protocol='HTTP/0.9'
Fri Feb 24 15:39:40 2006 Hdrs to WLS:[Connection]=[Keep-Alive]
Fri Feb 24 15:39:40 2006 Hdrs to WLS:[WL-Proxy-SSL]=[true]
Fri Feb 24 15:39:40 2006 Hdrs to WLS:[WL-Proxy-Client-IP]=[206.233.40.81]
Fri Feb 24 15:39:40 2006 Hdrs to WLS:[Proxy-Client-IP]=[206.233.40.81]
Fri Feb 24 15:39:40 2006 Hdrs to WLS:[X-Forwarded-For]=[206.233.40.81]
Fri Feb 24 15:39:40 2006 Hdrs to WLS:[X-WebLogic-Force-JVMID]=[unset]
Fri Feb 24 15:39:40 2006 Hdrs to WLS:[X-WebLogic-Request-ClusterInfo]=[true]
Fri Feb 24 15:39:40 2006 INFO: No session match found
Fri Feb 24 15:39:40 2006 URL->reallySend 52
Fri Feb 24 15:39:40 2006 INFO: Certificate validation succeeded
Fri Feb 24 15:39:40 2006 URL->reallySend 140
Fri Feb 24 15:39:40 2006 INFO: AddSessionCallback
Fri Feb 24 15:39:40 2006 INFO: Negotiated to cipher: 3
Fri Feb 24 15:39:40 2006 URL->reallySend 253
Fri Feb 24 15:39:40 2006 SSLWrite sent 232
Fri Feb 24 15:39:40 2006 SSLWrite completed, sent 232
Fri Feb 24 15:39:40 2006 Reader::fill() SSLRead success, read: 250
Fri Feb 24 15:39:40 2006 URL::parseHeaders: StatusLine set to [200 OK]
Fri Feb 24 15:39:40 2006 Hdrs from WLS:[Date]=[Fri, 24 Feb 2006 20:39:40 GMT]
Fri Feb 24 15:39:40 2006 Hdrs from WLS:[Content-Length]=[8247]
Fri Feb 24 15:39:40 2006 Hdrs from WLS:[Content-Type]=[text/html]
Fri Feb 24 15:39:40 2006 Hdrs from WLS:[Connection]=[Keep-Alive]
Fri Feb 24 15:39:40 2006 Hdrs from WLS:[Set-Cookie]=[UDAYSESSION=D1vM1Jpv4gLKpS8kS48ZHLTpQgfFKh4BpwZsn9yHgSbgTYpF2zff!87218319; path=/]
Fri Feb 24 15:39:40 2006 Hdrs from WLS:[X-WebLogic-JVMID]=[87218319]
Fri Feb 24 15:39:40 2006 parsed all headers OK
Fri Feb 24 15:39:40 2006 sendResponse() : r->status = '200'
Fri Feb 24 15:39:40 2006 Hdrs to client (reset):[Date]=[Fri, 24 Feb 2006 20:39:40 GMT]
Fri Feb 24 15:39:40 2006 Hdrs to client (add):[Set-Cookie]=[UDAYSESSION=D1vM1Jpv4gLKpS8kS48ZHLTpQgfFKh4BpwZsn9yHgSbgTYpF2zff!87218319; path=/]
Fri Feb 24 15:39:40 2006 for 127.0.0.1/7002/7002, updated JVMID: 87218319
Fri Feb 24 15:39:40 2006 Reader::fill() SSLRead success, read: 4072
Fri Feb 24 15:39:40 2006 Reader::fill() SSLRead success, read: 4072
Fri Feb 24 15:39:40 2006 Reader::fill() SSLRead success, read: 103
Fri Feb 24 15:39:40 2006 Write to the browser failed: calling URL::close at line 649 of ap_proxy.cpp
Fri Feb 24 15:39:40 2006 *******Exception type [WRITE_ERROR_TO_CLIENT] raised at line 650 of ap_proxy.cpp
Fri Feb 24 15:39:40 2006 INFO: Closing SSL context
Fri Feb 24 15:39:40 2006 URL->reallySend 23
Fri Feb 24 15:39:40 2006 INFO: Error after SSLClose, socket may already have been closed by peer
Fri Feb 24 15:39:40 2006 NOT failing over after sendResponse() exception: idempotent=ON pastFailover=1
Fri Feb 24 15:39:40 2006 request [] did NOT process sucessfully..................

I got it to work on both apache and Sun One
the problem was i was not using 1 way SSL certificate as my truststore on client side. Let me write a detailed note so that it can be helpful for others who see this
So Client-----https( 1 way)------Apache/SunOne--->https-----Weblogic
1. On Weblogic i just added custom keystore and custom trusttore as given in weblogic
2. I changed SunOne (i will give for SunOne and apache is similar) obj.conf to look like this
# Use only forward slashes in pathnames--backslashes can cause
# problems. See the documentation for more information.
<Object name="default">
AuthTrans fn="match-browser" browser="*MSIE*" ssl-unclean-shutdown="true"
NameTrans fn="ntrans-j2ee" name="j2ee"
NameTrans fn=pfx2dir from=/mc-icons dir="C:/Sun/WebServer6.1/ns-icons" name="es-internal"
#NameTrans fn=document-root root="$docroot"
PathCheck fn=nt-uri-clean
PathCheck fn="check-acl" acl="default"
PathCheck fn=find-pathinfo
#PathCheck fn=find-index index-names="index.html,home.html,index.jsp"
#ObjectType fn=type-by-extension
#ObjectType fn=force-type type=text/plain
#Service method=(GET|HEAD) type=magnus-internal/imagemap fn=imagemap
#Service method=(GET|HEAD) type=magnus-internal/directory fn=index-common
#Service method=(GET|HEAD|POST) type=*~magnus-internal/* fn=send-file
Service method=TRACE fn=service-trace
Error fn="error-j2ee"
AddLog fn=flex-log name="access"
</Object>
<Object name="j2ee">
Service fn="service-j2ee" method="*"
</Object>
<Object name="cgi">
ObjectType fn=force-type type=magnus-internal/cgi
Service fn=send-cgi
</Object>
<Object name="es-internal">
PathCheck fn="check-acl" acl="es-internal"
</Object>
<Object name="send-compressed">
PathCheck fn="find-compressed"
</Object>
<Object name="compress-on-demand">
Output fn="insert-filter" filter="http-compression"
</Object>
<Object name="weblogic" ppath="*">
Service fn="wl_proxy" WebLogicCluster="ukamath:7002,excursion:7002" CookieName=PIIE_USER_SESSION SecureProxy=ON RequireSSLHostMatch=FALSE TrustedCAFile="C:/cvsdir/concordebranch/IntegrationTests/model/integration/ssl/server/trustedcafile.pem" WLProxySSL=ON Debug=ALL DebugConfigInfo=TRUE WLLogFile="C:/Sun/WebServer6.1/https-ukamath.eideawdc1.local/logs/wlproxy.log"\
</Object>
NOTE:
1. i changed entire thing to go to our weblogic but you can change it to your required path by changing ppath
2. I had to comment NameTrans from adding paths to docs etc as for the same reason as weblogic needed to handle it rather than sun one.
3. I changed Sunone to use SSL certificate from Verisign (14 days) by going through the Admin Server of SunOne and clicking manage and then going through Security tab and filling the request. Then installed the certificate on the SunOne managed https-machine server. Then went to preferences and added security enabled ports. Make sure you click enabled on security and certificate host optional.
4. I changed my Java client to use same truststore as SunOne bby doing an import.
For this i copied the certificate received from Verisign to file as .pem and used weblogic utils.pem2der to convert it to derfile and then imported the der file using java keytool to cacerts of jdk.
5. My Java code looked like this using Sun's SSL implementation
System.setProperty("java.protocol.handler.pkgs", "com.sun.net.ssl.internal.www.protocol");
          //set provider
          java.security.Provider provider = (java.security.Provider)Class.forName("com.sun.net.ssl.internal.ssl.Provider").newInstance();
          java.security.Security.addProvider(provider);
          //set verifier
          com.sun.net.ssl.HostnameVerifier hv = new DHIHostNameVerifier();
          com.sun.net.ssl.HttpsURLConnection.setDefaultHostnameVerifier( hv );
          System.setProperty("javax.net.ssl.trustStore", "C:/cvsdir/concordebranch/cacerts");
          //System.setProperty("javax.net.ssl.trustStore", "C:/Program Files/Java/j2re1.4.2_10/lib/security/cacerts");
          //lets create a url
     URL url = new URL("https://ukamath:443/");
          URLConnection urlCon = url.openConnection();
If you have questions forward me an email and i can guide you. I am doing it as i struggled a lot because of it for first time.
Thanks

Weblogic Configuration with Apache 2.2

Hi ,
I am getting the below error configured weblogic 10.3.5 with apache 2.2
<HTML>
<HEAD>
<TITLE>Weblogic Bridge Message
</TITLE>
</HEAD>
<BODY>
<H2>Failure of server APACHE bridge:</H2><P>
<hr>Your content length exceeded INT_MAX<hr> </BODY>
</HTML>
Thanks,

http://middlewaremagic.com/weblogic/?p=7795 (see the load balancing section)

Problems with Cocoon 2.03 and Weblogic 6.1 SP3

I am having problems with Cocoon 2.03 and Weblogic 6.1 SP3, when I try to deploy
the cocoon.war.
Cocoon works fine when I unpack the cocoon.war into ...\mydomain\applications
(after I changed cocoon.xconf to use the following transformer factory: org.apache.xalan.processor.TransformerFactoryImpl).
However, when I deploy the cocoon.war through the weblogic console and try to
invoke cocoon (http://localhost:7001/cocoon/) I get the following error:
ERROR (2002-09-26) 11:28.40:859 [sitemap] (/cocoon/) ExecuteThread: '7' for
queue: 'default'/Handler: Error compiling sitemap
java.util.zip.ZipException: The system cannot find the file specified
     at java.util.zip.ZipFile.open(Native Method)
     at java.util.zip.ZipFile.<init>(ZipFile.java:110)
     at java.util.zip.ZipFile.<init>(ZipFile.java:125)
     at weblogic.utils.zip.ZipURLConnection.getInputStream(Handler.java:49)
     at org.apache.cocoon.components.source.URLSource.getInputStream(URLSource.java:151)
     at org.apache.cocoon.components.source.URLSource.getInputSource(URLSource.java:223)
     at org.apache.cocoon.components.language.generator.ProgramGeneratorImpl.generateResource(ProgramGeneratorImpl.java:318)
     at org.apache.cocoon.components.language.generator.ProgramGeneratorImpl.createResource(ProgramGeneratorImpl.java:282)
     at org.apache.cocoon.components.language.generator.ProgramGeneratorImpl.load(ProgramGeneratorImpl.java:196)
     at org.apache.cocoon.sitemap.Handler.run(Handler.java:228)
     at java.lang.Thread.run(Thread.java:484)
I understood that there were problems when the cocoon.war file that did occur
when you unpacked the war, but I believed that these problems did not occur with
WLS6.1 SP3.
Has anyone else encountered this problem and solved it? Any help would be greatly
appreciated.
Thanks in advance.
Paul

This how I got Cocoon 2.04 up and running on WLS 6.1.4
Download the Cocoon source from http://xml.apache.org/cocoon/dist/
Remove all but the following JARs from lib/optional:
commons-jxpath-1.0.jar
jing-20020724.jar
resolver-20020130.jar
servlet_2_2.jar
commons-logging-1.0.jar
jtidy-04aug2000r7-dev.jar
rhino-1.5r3.jar
xt-19991105.jar
Update lib/jars.xml to reflect these changes
Issue build commands:
./build.sh clean (Note: Always clean first!)
./build.sh -Dinclude.webapp.libs=yes -Dexclude.webapp.samples=yes -Dexclude.webapp.documenation=yes
-Dexclude.webapp.javadocs=yes webapp
Copy the following JARs to your WLS instance’s lib directory:
xercesImpl-2.0.0.jar
xml-apis.jar
xalan-2.3.1.jar
xt-19991105.jar
java/lib/tools.jar
Sample of config/SERVER_NAME.setenv
LIB=/path/to/lib
JARS=$LIB/xercesImpl-2.0.0.jar:$LIB/xml-apis.jar:$LIB/xalan-2.3.1.jar:$LIB/xt-19991105.jar:/opt/java1.3/lib/tools.jar
JAVACLASSPATH=$JARS:.:$JAVACLASSPATH
JAVA_HOME=/opt/java1.3
Deploy the resluting cocoon.war and you should have a Cocoon up and running that
can do the XML->HTML Hello World sample. The status page works fine too.
My advice is to launch this stripped configuration first and if needed add more
features later by adding the JARs of your choice to the class path (or add the
to your webapp-build if you are confident that WLS are capable of handling their
manifests).
Good luck
/Peter
"Paul Petley" <[email protected]> wrote:
>
>
I am having problems with Cocoon 2.03 and Weblogic 6.1 SP3, when I try
to deploy
the cocoon.war.
Cocoon works fine when I unpack the cocoon.war into ...\mydomain\applications
(after I changed cocoon.xconf to use the following transformer factory:
org.apache.xalan.processor.TransformerFactoryImpl).
However, when I deploy the cocoon.war through the weblogic console and
try to
invoke cocoon (http://localhost:7001/cocoon/) I get the following error:
ERROR (2002-09-26) 11:28.40:859 [sitemap] (/cocoon/) ExecuteThread:
'7' for
queue: 'default'/Handler: Error compiling sitemap
java.util.zip.ZipException: The system cannot find the file specified
     at java.util.zip.ZipFile.open(Native Method)
     at java.util.zip.ZipFile.<init>(ZipFile.java:110)
     at java.util.zip.ZipFile.<init>(ZipFile.java:125)
     at weblogic.utils.zip.ZipURLConnection.getInputStream(Handler.java:49)
     at org.apache.cocoon.components.source.URLSource.getInputStream(URLSource.java:151)
     at org.apache.cocoon.components.source.URLSource.getInputSource(URLSource.java:223)
     at org.apache.cocoon.components.language.generator.ProgramGeneratorImpl.generateResource(ProgramGeneratorImpl.java:318)
     at org.apache.cocoon.components.language.generator.ProgramGeneratorImpl.createResource(ProgramGeneratorImpl.java:282)
     at org.apache.cocoon.components.language.generator.ProgramGeneratorImpl.load(ProgramGeneratorImpl.java:196)
     at org.apache.cocoon.sitemap.Handler.run(Handler.java:228)
     at java.lang.Thread.run(Thread.java:484)
I understood that there were problems when the cocoon.war file that did
occur
when you unpacked the war, but I believed that these problems did not
occur with
WLS6.1 SP3.
Has anyone else encountered this problem and solved it? Any help would
be greatly
appreciated.
Thanks in advance.
Paul

Problems with Weblogic 8.1 SP3 and Toplink 10.1.3

Hi!
I'm runnning into two problems when using toplink 10.1.3 and weblogic 8.1 SP3.
I mapped my classes with the mapping workbench, where I defined also the optimistic locking properties.
When I export that project for bean compiling there are entries like store-version-in-cache.
When i compile the beans i get an exception that store-version-in-cache is a unexpected element.
Ok, next problem: i leave out the locking properties, beans are compiling.
When i start the server and call a named query i get the following exception:
[TopLink Warning]: 2004.11.12 05:25:13.437--ServerSession(697447)--java.lang.AbstractMethodError: weblogic.jdbc.wrapper.
Statement_COM_ibm_db2_jdbc_app_DB2Statement.setFetchSize(I)V
I think I configured the server correctly (but of course i'm not absolutly sure). Where is the fault?
Any help? Thanx.
Greetings volker

Not sure on the first problem, store-version-in-cache is a valid element. Make sure you are using the same version of the Mapping Workbench and the runtime library. Please attach the XML for the version locking policy that was generated and the error message.
The abstract method error seems to indicate that the setFetchSize method is missing on your driver.
setFetchSize has been part of JDBC and JDK since JDBC 2.0/JDK 1.2, how old is the driver that you are trying to use? I noticed the COM is uppercase, so I assume this is a very old driver, can you use the more update version? TopLink requires JDK 1.3 support as a minimum.

Using Resin and Weblogic with Apache

Hi,
Does anybody know if i can use Weblogic to serve JSP and Resin to
serve some servlets within Apache?
Let me explain the case:
We are testing to setup Weblogic with Apache as the webserver.
Weblogic will be used to serve the JSP pages so i configured the
httpd.conf as follows:
<IfModule mod_weblogic.c>
MatchExpression *.jsp
WebLogicHost localhost
WebLogicPort [port]
</IfModule>
This works fine and i can serve the jsp-pages without any problems.
Since we work with thirdparty software we need to use Resin too. This
is not much trouble to implement in Apache and i can make sure that
some servlets are handled by caucho instead of Weblogic:
<Location /servlet/Inventory>
SetHandler caucho-request
</Location>
The above request works fine too!
However i have to load the resin.conf file for full use of Resin in
Apache. This setting however implicates that JSP pages aren't served
by Weblogic anymore but are sent to Resin also. Even with the
MatchExpression setting in httpd.conf, Apache still thinks JSP needs
to be sent to Resin instead of Weblogic.
Is there some way i can make sure that the JSP pages are served by
Weblogic and not by Resin???
Thanx in advance

Hi all,
Well, i figured it all out and if anyone would like to give it a try
to, just do the following.
The mod_caucho.so file was compiled with the option to handle .jsp
files. I hashed out the following line in
/src/c/plugin/common/config.c:
cse_add_locatio ..... jsp etc.
And then i configure the mod_caucho.so with:
./configure --with-apxs=/apps/apache/bin/apxs
Now i have a perfect mod_caucho.so file which does not handle .jsp.
All calls with .jsp are processed by weblogic, just as i wanted!
Have fun with it (i shall :-)
Remy
[email protected] (Remy) wrote in message news:<[email protected]>...
Hi,
Does anybody know if i can use Weblogic to serve JSP and Resin to
serve some servlets within Apache?
Let me explain the case:
We are testing to setup Weblogic with Apache as the webserver.
Weblogic will be used to serve the JSP pages so i configured the
httpd.conf as follows:
<IfModule mod_weblogic.c>
MatchExpression *.jsp
WebLogicHost localhost
WebLogicPort [port]
</IfModule>
This works fine and i can serve the jsp-pages without any problems.
Since we work with thirdparty software we need to use Resin too. This
is not much trouble to implement in Apache and i can make sure that
some servlets are handled by caucho instead of Weblogic:
<Location /servlet/Inventory>
SetHandler caucho-request
</Location>
The above request works fine too!
However i have to load the resin.conf file for full use of Resin in
Apache. This setting however implicates that JSP pages aren't served
by Weblogic anymore but are sent to Resin also. Even with the
MatchExpression setting in httpd.conf, Apache still thinks JSP needs
to be sent to Resin instead of Weblogic.
Is there some way i can make sure that the JSP pages are served by
Weblogic and not by Resin???
Thanx in advance

Issue with applet and Weblogic 8.1 SP3

Hello,
I have an applet that is making EJB calls to a Weblogic 8.1 SP2 app server via an IIS web server. The weblogic.ejbc tool was used to generate the stubs and skeletons and deployed into the applet.jar. The applet comes up fine in this scenario. But when this applet is connected to a Weblogic 8.1 SP3 app server it failes to come up. Apparently, there is some dependency between the ejbc generated stubs and skeletons with the service pack that is being used. One way of solving this problem is to generate separate stubs and skeletons for each service pack but I would like to avoid doing this and would like it to be transparent to the applet. Is there any configuration that I can make which can help solve this problem ?
-Vijay

You could check up for the relaease. I don't think there was such a change in SP3. But generating the stubs and skeletons again will definitely solve. You might even test it backwards (generate on SP3 and test on SP2).
xH4x0r

Integarte Weblogic with Apache on Windows

Hi guys,
Did any one integrate Weblogic server with Apache?
I tried but portal home page takes a lot of time to load.
I don't know why?
If any one tried this can you let me the know the steps or URL from where I can get info?
Thanks!

Here are some links that might be helpful
http://e-docs.bea.com/wls/docs81/plugins/overview.html
http://e-docs.bea.com/wls/docs70/plugins/apache.html
Seenu.

Problem with weblogic 8.1 sp3 XAConnection

Hi,
I am getting the following exception and once this exception is encountered, same exception is thrown for all subsequesnt transactions.
I am using weblogic 8.1 SP3, jdbc tx datasource for ms sql server.
Can anyone help?
Unexpected exception while enlisting XAConnection java.sql.SQLException: XA error: XAER_PROTO : Routine was invoked in an inproper context start() failed on resource 'TXConnectionPoll': XAER_PROTO : Routine was invoked in an inproper context
javax.transaction.xa.XAException: [BEA][SQLServer JDBC Driver]Transaction has to commit/rollback before another transaction starts.
Regds.
DJ

Hi,
The application consists of struts1.1 in the web layer.
All user entered data are wrapped in a map and using
dispatcher controller (session bean) the respective
business objectss (session beans - Tx attribute is
'Required') are called by passing the map data which
in turn, executes the business logic based on the user
provided data.
The session beans calling the entity beans to do
create/update/delete jobs in database.
To retrieve data from database, we are using iBatis
framework and queries are being fired from session
beans.
In some of the functionality, we are using stored
procedure (SQL server 2000), which are being called
from within session bean.
I think, wherever, we are calling SP from session bean.
some local transactions are being created, which I
could not identify so far.We did not create any nested
transaction within stored procedure.
Please ignore the same posting I did in another topic.
Regds.
DJ

Problems with AM and WebLogic 8.1 sp3

Hello,
The following are my environment. (both on Solaris 10)
- Sun AM
- WebLogic 8.1 sp3
I want to try an easy integration between AM and WebLogic. After I installed policy agent for WebLogic and properly configured. It seem to work at some basic level.
When I try to access protected resource on WebLogic. The agent can intercept and redirect to AM's login page where I enter username and password. After I enter correct username and password, it will be redirected back to my protected resource. However, this time I got error 403 forbidden.
I think this is because WebLogic doesn't know that I just already sign-in. There must be something needed to do to map AM's userid to WebLogic id.
But I don't know how.
Could someone give me some suggestion or point me to some documents? Thanks in advance.

I meant creating a policy in the SAM web interface, where you can add the required rule (specifying resource) and the subjects to whom the policy is applicable.
Of course, if you are using J2EE_POLICY, the URL policy is of no consequence. The best practice is to use amFilter.mode = ALL, where the J2EE policies are enforced and verified by the application / app server, and the URL's are protected by SAM as well. In that case, the user has to be authorized by both SAM as well as J2EE to access the application.
This, of course, is subject to the "best of my knowledge" clause!

Unable to deploy ear on weblogic 8.1 sp3

hi .
i have an application in struts 1.1 which was working fine in weblogic 8.1 sp3. now i have upgraded to struts 1.2.8 and when i am trying to deploy the applicaiton following error is thrown.
Unable to initialize Struts ActionServlet due to an unexpected exception or error thrown, so marking the servlet as unavailable. Most likely, this is due to an incorrect or missing library dependency.
java.lang.NoSuchMethodError: <init>
at org.apache.commons.digester.Digester.<init>()V(Digester.java:150)
at org.apache.struts.action.ActionServlet.initServlet()V(ActionServlet.java:1111)
at org.apache.struts.action.ActionServlet.init()V(ActionServlet.java:328)
at javax.servlet.GenericServlet.init(Ljavax.servlet.ServletConfig;)V(GenericServlet.java:258)
at weblogic.servlet.internal.ServletStubImpl$ServletInitAction.run()Ljava.lang.Object;(ServletStubImpl.java:1018)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Lweblogic.security.subject.AbstractSubject;Ljava.security.PrivilegedAction;)Ljava.lang.Object;(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Lweblogic.security.acl.internal.AuthenticatedSubject;Lweblogic.security.acl.internal.AuthenticatedSubject;Ljava.security.PrivilegedAction;)Ljava.lang.Object;(SecurityManager.jav
at weblogic.servlet.internal.ServletStubImpl.createServlet()Ljavax.servlet.Servlet;(ServletStubImpl.java:894)
at weblogic.servlet.internal.ServletStubImpl.createInstances()V(ServletStubImpl.java:873)
at weblogic.servlet.internal.ServletStubImpl.prepareServlet(Lweblogic.servlet.internal.RequestCallback;)V(ServletStubImpl.java:812)
at weblogic.servlet.internal.WebAppServletContext.preloadServlet(Ljava.lang.String;)V(WebAppServletContext.java:3281)
at weblogic.servlet.internal.WebAppServletContext.preloadServlets(Ljava.util.Vector;)V(WebAppServletContext.java:3238)
at weblogic.servlet.internal.WebAppServletContext.preloadServlets()V(WebAppServletContext.java:3224)
at weblogic.servlet.internal.WebAppServletContext.preloadResources()V(WebAppServletContext.java:3207)
at weblogic.servlet.internal.HttpServer.preloadResources()V(HttpServer.java:694)
at weblogic.servlet.internal.WebService.preloadResources()V(WebService.java:483)
at weblogic.servlet.internal.ServletInitService.resume()V(ServletInitService.java:30)
at weblogic.t3.srvr.SubsystemManager.resume()V(SubsystemManager.java:131)
at weblogic.t3.srvr.T3Srvr.resume()V(T3Srvr.java:966)
at weblogic.t3.srvr.T3Srvr.run([Ljava.lang.String;)I(T3Srvr.java:361)
at weblogic.Server.main([Ljava.lang.String;)V(Server.java:32)
I have checked the digester and the clas spath. i am using the digester-1.6 which is shipped with struts 1.2.8
Edited by surya_shikha at 04/02/2008 4:08 AM

hi,
Maybe your commons-digester is not the same version as provided with struts-1.2.8

Weblogic 5.1 sp3 with Apache or Stronghold on Solaris 2,7

Similar Messages

Maybe you are looking for