Weblogic 5 user license-Issue

Hii,
I made PS 8.49 accessible to PS developer(they can access PIA from anywhere in the world)..but here I am getting max.user/session 5 limiting issue
"The Server is not able to service this request: [Server:002621]Connection rejected, the server license allows connections from only 5 unique IP addresses."
How to resolve this?
Thanks in Advance

I usually don't do that. If you want help, please give more details here (Weblogic version, where has it been downloaded from...), or hire a consultant.
Have you read the note that I mentioned above ? It's not just running the script, I was given the main step, but more has to be done (I won't copy&paste the note over here).
You could also read my installation guide : http://gasparotto.blogspot.nl/2008/01/on-peoplesoft-road-weblogic-92.html
Moreover, your issue has already been reported in your other thread :
Peoplecode not executing
Nicolas.

Similar Messages

Weblogic 4.5 license issue

The license file which we used in weblogic 4.5 does not work properly
under firewall. It does work fine if without firewall, five
simultaneous user can connect in. BUT, if under firewall, even one
user will got license issue if he runs for one day or two. We guess
firewall may confused weblogic about the client ip addresses.
Any help or suggestion are highly helpful!!

<WEBLOGIC-LICENSES>
<LICENSE PRODUCT="WebLogic"
IP="any" UNITS="5" EXPIRATION="never"
KEY="d5326244607192d5b8a65abc8b062bde"
/>
<LICENSE PRODUCT="WebLogic/SSL"
IP="any" UNITS="5" EXPIRATION="never"
KEY="2156fec41e8e5df182197356f1683dea"
/>
<LICENSE PRODUCT="jdbcKona/MSSQLServer4"
IP="any" UNITS="5" EXPIRATION="never"
KEY="98595dcca2be251c8b6d5e793d466718"
/>
<LICENSE PRODUCT="jdbcKona/Informix4"
IP="any" UNITS="5" EXPIRATION="never"
KEY="4c82b005d3ac938b07e2bc2f1c2bec1b"
/>
<LICENSE PRODUCT="jdbcKona/Oracle"
IP="any" UNITS="5" EXPIRATION="never"
KEY="2c0ff2fb4c9fa01bbf2c9d34c8c1096a"
/>
<LICENSE PRODUCT="jdbcKona/Sybase"
IP="any" UNITS="5" EXPIRATION="never"
KEY="a5cdbdbf52cde0d51af2f72165a9f94c"
/>
<LICENSE PRODUCT="jdbcKona/MSSQLServer"
IP="any" UNITS="5" EXPIRATION="never"
KEY="0d69039bed111ce43332a90e9a9ba2e6"
/>
</WEBLOGIC-LICENSES>

Hi Michael
The IP address is the first thing that I verified and it is correct. Any
other ideas as to what I might be missing? Thanks.
Chris Morris
YOUcentric, Inc.
[email protected]
Michael Girdley <[email protected]> wrote in message
news:39879048$[email protected]..
>
>
Unfortunately, it appears that your license was created incorrectly. I
assume that your IP address is not 192.168.11.16? Or is it?
Thanks,
Michael
Michael Girdley
Product Manager, WebLogic Server & Express
BEA Systems Inc
"Chris Morris" <[email protected]> wrote in message
news:3986eff8$[email protected]..
Hello
I am using Weblogic 4.5.1 on a Sun Solaris 8 box. I was using an XML
license file that has no expiration date but was limited to three users.An
unlimited user license with no expiration date was purchased and I am
attempting to implement the license for this box. When I attempt to runmy
application I get this error message:
$$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$
Loaded License : /opt/weblogic/license/WebLogicLicense.xml
However Unable to start because :
License key incorrect for
WebLogic,192.168.11.16,unlimited,never|558be10208d2f2fc6fa3382b23658c6d
As well as the fact that: No License found for Tengah
As well as the fact that: No License found for WebLogic/JDBC
As well as the fact that: No License found for Tengah/JDBC
As well as the fact that: No License found for jdbcKona/T3

ECC user licenses issue for using Webdynpro ABAP in portal

Hi all,
If we want to use Webydnpro ABAP in our external facing portal which is being used by more than 20000 users, how do we manage the ECC licenses for all these users? It will be really expensive to have that many number of licenses in ECC (one for every portal user). Is there any other work around for this?
Any info on this will be beneficial.
Thanks,
Hari

I am not sure why you want to use WebDynpro for External Portal . As Webdynpro is resource intensive , I never saw client asking for this type of requirement. Are developing any prototype ?
In my experience ABAP webdynpro is more is used more for business packages and internal portals not for external portals. If you want to use this AWD for EEP Please see below link from SAP Help for pre-requisites
http://help.sap.com/saphelp_nw04s/helpdata/en/96/bdab419451db34e10000000a1550b0/content.htm
Last Step in above Link, this mentions that ABAP Webdynpro needs logon.
As other people mentioned there might be a good way of doing if you contact your SAP account executive to find out if there are any different types of licenses. But you end up in taking other extra licences which not acceptable solution for clients.
If you want to use WebDynpro for external Portal ( which is not at all suggested for external ) at any cost , better to go with Web Dynpro for Java which will not need any extra licences on R3.

User license issue

Hi Experts,
when i create delivery document through a non super user, i can't able to edit unit price. but for super user there is no issue. how could i over come this
Thanks in advance
Sundar

Hi all,
Thanks for your reply,
I have set full authorization for delivery document for that user and i also checked the form settings for unit price it is also visible and active.
Now what to do
thanks in advance
Sundar

WebLogic 10.3.0 WLI Domain - Microsoft AD administrator user access issue.

Hi SOA Experts,
We are facing issue of getting noaccess exception on console (below) when doing datasource testing using Microsoft AD administrator user. The same works fine when testing using WLS embedded LDAP administrator user in WLI domain. In plain WLS 10.3.0 domain (without WLI) with same Microsoft AD configuration they do not see this issue, they are able to successfully test data source using both embedded WLS administrator and Microsoft AD administrator user.
I enabled security ATN and ATZ debug flags and below is my observation.
In plain WLS 10.3.0 domain I see that default weblogic administrator user in embedded LDAP is part of administrators group. Microsoft AD administrator user is part of Administrators group from MS AD.
Whereas in WLI domain I see that default weblogic administrator user is part of Administrators & IntegrationAdministrators groups. In WLI domain Administrators group is again part of IntegrationAdministrators group (below is debug logs).
Below is Plain WLS Domain Debug log
####<Dec 6, 2010 5:20:14 PM EST> <Debug> <SecurityAtz> <slsol10> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)
'> <<WLS Kernel>> <> <> <1291674014123> <BEA-000000> < Subject: 2
Principal = weblogic.security.principal.WLSUserImpl("weblogic")
Principal = weblogic.security.principal.WLSGroupImpl("Administrators")
Below is WLI Domain Debug Log
<> <1291669863989> <BEA-000000> <XACML Authorization isAccessAllowed(): input arguments:>
####<Dec 6, 2010 4:11:03 PM EST> <Debug> <SecurityAtz> <slsol10> <AdminServer> <[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <>
<> <1291669863989> <BEA-000000> < Subject: 3
Principal = weblogic.security.principal.WLSUserImpl("weblogic")
Principal = weblogic.security.principal.WLSGroupImpl("Administrators")
Principal = weblogic.security.principal.WLSGroupImpl("IntegrationAdministrators")
The issue of Microsoft AD administrator user not able to test datasource in WLI domain seems to be happening because of IntegrationAdministrators group which comes by default with WLI domain (in plain WLS domain we do not have this group). Looks like the datasource which is being created in WLI domain seems to be being treated as WLI resource and user accessing it is being checked if it part of IntegrationAdministrators group. In this case weblogic default administrator user is part of IntegrationAdministrators, for which we do not see issue where as Microsoft AD administrator user which is not part of IntegrationAdministrators seems to be having problem.
Below is snipper of Microsoft AD administrator user in Debug logs
####<Dec 6, 2010 4:13:31 PM EST> <Debug> <SecurityAtz> <slsol10> <AdminServer> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <>
<> <1291670011687> <BEA-000000> <XACML Authorization isAccessAllowed(): input arguments:>
####<Dec 6, 2010 4:13:31 PM EST> <Debug> <SecurityAtz> <slsol10> <AdminServer> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <>
<> <1291670011687> <BEA-000000> < Subject: 2
Principal = weblogic.security.principal.WLSUserImpl("MSADAdminUser")
Principal = weblogic.security.principal.WLSGroupImpl("Administrators")
Also one more observation about datasource which is created is in plain WLS & WLI domain created datasource resource type is shown as “jdbc” which is expected, but in addition in WLI domain I observe that created datasource resource type is marked as JMX and DS is being considered as application (below), not sure if this has something to do with the issue.
Below is WLS domain debug log, below you can see that datasource is being treated as JDBC resource which is expected.
####<Dec 6, 2010 5:21:03 PM EST> <Debug> <SecurityAtz> <slsol10> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1291674063776> <BEA-000000> <com.bea.common.security.internal.service.AccessDecisionServiceImpl.isAccessAllowed Resource=type=<jdbc>, application=, module=, resourceType=ConnectionPool, resource=testDS, action=reserve>
Below is WLI domain debug log, below you can see that datasource is being treated as application and it says resource type as JMX
####<Dec 6, 2010 4:12:17 PM EST> <Debug> <SecurityAtz> <slsol10> <AdminServer> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1291669937755> <BEA-000000> < Resource: type=<jmx>, operation=get, application=testDS, mbeanType=weblogic.j2ee.descriptor.wl.JDBCDataSourceBean, target=Name>
I created user in embedded LDAP in WLI domain with same name as MS AD administrator user and assigned it to Administrators group, that obviously works but is not acceptable solution.
Below is exception thrown on console when testing datasource using Microsoft AD administrator user.
weblogic.management.NoAccessRuntimeException: Access not allowed for subject: principals=[MSADAdminUser, Administrators], on Resource weblogic.management.runtime.JDBCDataSourceRuntimeMBean Operation: invoke , Target: testPool at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:205) at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:222) at javax.management.remote.rmi.RMIConnectionImpl_1030_WLStub.invoke(Unknown Source) at javax.management.remote.rmi.RMIConnector$RemoteMBeanServerConnection.invoke(RMIConnector.java:978) at weblogic.management.jmx.MBeanServerInvocationHandler.doInvoke(MBeanServerInvocationHandler.java:544) at weblogic.management.jmx.MBeanServerInvocationHandler.invoke(MBeanServerInvocationHandler.java:380) at $Proxy92.testPool(Unknown Source) at com.bea.console.actions.jdbc.datasources.testjdbcdatasource.TestJDBCDataSource.begin(TestJDBCDataSource.java:114) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.apache.beehive.netui.pageflow.FlowController.invokeActionMethod(FlowController.java:870) at org.apache.beehive.netui.pageflow.FlowController.getActionMethodForward(FlowController.java:809) at org.apache.beehive.netui.pageflow.FlowController.internalExecute(FlowController.java:478) at org.apache.beehive.netui.pageflow.PageFlowController.internalExecute(PageFlowController.java:306) at
- BoyelT

This issue has been resolved.
The problem of Microsoft active directory administrator user not able to test the datasource in WLI domain is caused because of IntegrationAdministrators group & IntegrationAdmin role which comes in WLI domain. Assigning the Microsoft Administrator group to IntegrationAdmin role from WebLogic console has resolved the issue.
Below are steps for assigning the MS AD administrator group to IntegrationAdmin role from console in WLI domain.
======================================================
- Login to console and click on "Security Realms" and "myrealm"
- Go to "Roles and Policies" tab and expand "Global Roles" tree and "Roles" tree view under it.
- Click on "View Role Conditions" link for "IntegrationAdmin" role.
- Click on "Add Conditions" button select Group (default) for "Predicate List" drop down box and click Next button.
- Specify MS AD admin group name for "Group Argument Name" text box and hit on Add button.
======================================================
- BoyelT
Edited by: BoyelT on Dec 20, 2010 1:36 PM

License issue on Weblogic 4.5.1

Hello
I am using Weblogic 4.5.1 on a Sun Solaris 8 box. I was using an XML
license file that has no expiration date but was limited to three users. An
unlimited user license with no expiration date was purchased and I am
attempting to implement the license for this box. When I attempt to run my
application I get this error message:
$$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$
Loaded License : /opt/weblogic/license/WebLogicLicense.xml
However Unable to start because :
License key incorrect for
WebLogic,192.168.11.16,unlimited,never|558be10208d2f2fc6fa3382b23658c6d
As well as the fact that: No License found for Tengah
As well as the fact that: No License found for WebLogic/JDBC
As well as the fact that: No License found for Tengah/JDBC
As well as the fact that: No License found for jdbcKona/T3

Hi Michael
The IP address is the first thing that I verified and it is correct. Any
other ideas as to what I might be missing? Thanks.
Chris Morris
YOUcentric, Inc.
[email protected]
Michael Girdley <[email protected]> wrote in message
news:39879048$[email protected]..
>
>
Unfortunately, it appears that your license was created incorrectly. I
assume that your IP address is not 192.168.11.16? Or is it?
Thanks,
Michael
Michael Girdley
Product Manager, WebLogic Server & Express
BEA Systems Inc
"Chris Morris" <[email protected]> wrote in message
news:3986eff8$[email protected]..
Hello
I am using Weblogic 4.5.1 on a Sun Solaris 8 box. I was using an XML
license file that has no expiration date but was limited to three users.An
unlimited user license with no expiration date was purchased and I am
attempting to implement the license for this box. When I attempt to runmy
application I get this error message:
$$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$
Loaded License : /opt/weblogic/license/WebLogicLicense.xml
However Unable to start because :
License key incorrect for
WebLogic,192.168.11.16,unlimited,never|558be10208d2f2fc6fa3382b23658c6d
As well as the fact that: No License found for Tengah
As well as the fact that: No License found for WebLogic/JDBC
As well as the fact that: No License found for Tengah/JDBC
As well as the fact that: No License found for jdbcKona/T3

License issue for EP users

Hi,
I created certain WD application based on Z- functional module like delivery report, outstanding, sales order .My data source is ECC. I mapped single ecc users to multiple ep users.
Now i want to provide the login facility to the n- numbers of ep users by keeping the ep server outside the firewall. But we have limited ecc user license.
So, wether it is necessary to buy the each and every ep users license who want to logon to the portal or by user mapping (by single ecc user),multiple ep users can logon to the portal?
Thanks,
Kundan
Edited by: Kundan 2009 on Mar 10, 2010 1:43 PM
Edited by: Kundan 2009 on Mar 10, 2010 1:44 PM
Edited by: Kundan 2009 on Mar 10, 2010 1:50 PM

Hi Kundan,
If your system is ABAP + JAVA, then you don't need licence for EP user.
It will comes uder licence for your SAP backend System.
Thanks
Arun

Adobe acrobat 9 pro installation/licensing issues

I installed my licensed copy of Acrobat 9 on a new Windows 7 system. Acrobat launched but would not open files and shuts down on attempt. Message is "Licensing for this product has stopped working" with subtext "You cannot use the product at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT administrator or Adobe customer support for help."
I doubt any of you have a solution, so I simply remark on what transpired as a warning and complaint:
1. I went to Adobe databse and found that a patch was provided to correct installations/licensing problems on windows 7. I downloaded it and installed per instructions. It did not resolve the problem.
2. I uninstalled/reinstalled several times. no resolution.
3. I called customer support and was outsourced to someone who knew little and first sent me to a kb article having to do with 'expired licensing' even though I clearly informed them that the message and the fact had nothing to do with expired licenses. They finally referred me to kb405970 on "Licensing has stopped working". I tried all of the applicable solutions (methods 1-6) and none of them worked. Now I will have to wait until tomorrow (though I had pressing work to do today) to contact support again. I fear I will get another outsourced tech who knows little and wastes more of my time. Such is Adobe's way of supporting paid and licensed product users.
I understand and sympathize with Adobe's wishes to protect its products from piracy. However, I expect and paid for a product which works on major and supported operating systems like windows 7. I also understand that if MS or Mac put out a new OS or version, it may require certain adjustments or updates on Adobe's part. What I do not understand (or have patience with) is that 1) Adobe failed to provide a patch that works; 2) that it then sends me to an outsourced customer service tech who didn't have the knowledge to correct the problem and gave me the wrong information to begin with*. What I finally got was the kb article with a series of multi-step instructions for several methods, none of which worked. This is an unprofessional and unethical response to those of us who have paid for our product and expect it to work under reasonable conditions in a supported environment. This is not an acceptable good-faith effort to resolve issues for which Adobe should take full responsibility.
If any of you do happen to have a real solution (or had a similar problem) do let me know....
*The first thing the outsourced tech wished to do was get onto my machine via a remote connection, before anything was tried other than giving them the error message and have them provide me with the wrong information. It became clear that this person had less knowledge than I do (which isn't saying much) and there was no way I was going to permit a clueless techie to crawl around in my machine and fiddle with settings. That is simply asking for trouble. I'm perfectly capable of opening panels and following instructions myself. DC should be the last thing tried; not the first.

Bill, I tried as you suggested - installed every update from 9.1 through 9.3.4. The 'license not working message persists'. The only change was that now Acrobat will not close and must be forced to shut down from the taskbar menu. I appreciate the suggestion though.
Called Adobe (Manila) again, within the hours given on their contact page for installation and licensing issues, and was told "It's Sunday, nobody here can help you". Finally, after an hour of hammering got them to get me a supervisor (their script says to tell the customer there "Is no supervisor available on Sunday" - Finally the "supervisor", Alvin, suggested I need a new serial number and left me on the line while he called someone else to get on. Cameback and informed me that he couldn't get one, I'd have to call Monday (how's that for having solutions?) Result: wasted more time and had more delay on my project.
Conclusion: Adobe has become obsessed and 'piranoic' about piracy and licensing to the extent that they put that first and client/customer needs second (if that). After reading a lot of online 'Adobe Sucks' forums, I'm inclined to believe Adobe is shooting itself in its own foot and is not going to be a reliable method of presentation/document transmission in the future - service and support is an integral part of software and other concerns such as piracy or licensing need to be transparent to legitimate users. Sad that they spend so much time on this, when they need to be fixing real problems. As well, these outsourcing Philipines companies are poor substitutes for good support - they are so scripted and obsessed with regulations over solutions that it is clear that only the most persistent users will get anywhere with them. As a frontline of contact with after-sale clients, they are going to cost Adobe a lot of potential business in the future, whatever their short-term savings. Too bad. Adobe used to be a leader in the market.
Next round: Calling Manila again this am. to be continued...

ORA-20001: The printing engine..Is this related to a BIP licensing issue?

Hello all,
The error "ORA-20001: The printing engine could not be reached because either the URL..." happens in 2 cases:
<pre>
1. When our BIP is down or being bumped
2. As an APEX administrator, in workspace environment settings, the print server is set to OFF.
</pre>
I'm thinking that this is a licensing issue but I need some clarification on what is causing the error, because all we are trying to do is bring up a PDF report that a user can open or save. BIP is not involved at this point. Is it because the report was developed using BIP that APEX needs BIP up? How does APEX even know the report was developed using BIP? Were are using APEX 3.2.1.00.12 and BIP 10.1.3.4.1
The error happens when a user clicks on a PDF icon that calls an "After Submit Process". The following is the code and the report that was created in BIP is loaded into APEX with a "Named Columns (RTF)" layout type.
Alex.
declare
l_xml                         clob;
l_template                    clob;
l_request_blob                blob;
l_response                    blob;
begin
   ...call up a stored proc to populate l_xml with report data
-- Fetch template
select page_template
into   l_template
from   apex_030200.wwv_flow_report_layouts
where flow_id = :app_id
and    report_layout_name = 'pdf_report';
-- Convert CLOB to BLOB
l_request_blob := wwv_flow_utilities.clob_to_blob(l_xml);
-- Call unsupported and undocumented APEX function
l_response :=
    apex_030200.wwv_flow_print_util.convert(
      p_report_data   => l_request_blob,
      p_template      => l_template,
      p_template_type => 'rtf',
      p_output        => 'pdf'
-- Set correct mime type and download response
owa_util.mime_header('application/pdf', false);
htp.p('Content-length: ' || dbms_lob.getlength(l_response));
htp.p('Content-Disposition: attachment; filename="Claim_details.pdf"');
owa_util.http_header_close;
apex_application.g_page_text_generated := true;
apex_application.g_unrecoverable_error := true;
wpg_docload.download_file(l_response);

See, http://www.oracle.com/technetwork/developer-tools/apex/configure-printing-093060.html
http://download.oracle.com/docs/cd/E17556_01/doc/install.40/e15513/otn_install.htm#CBHBJDDE
(excerpt copied here, for you convenience)
7. Enabling Network Services in Oracle Database 11g
By default, the ability to interact with network services is disabled in Oracle Database 11g release 1 (11.1). Therefore, if running Oracle Application Express with Oracle Database 11g release 1 (11.1), use the new DBMS_NETWORK_ACL_ADMIN package to grant connect privileges to any host for the FLOWS_030100 database user. Failing to grant these privileges results in issues with PDF/report printing, specifically, you will get the following error message:
ORA-20001: The printing engine could not be reached because either the URL specified is incorrect or a proxy URL needs to be specified.
Follow the steps mentioned in the Oracle Application Express Installation Guide, Enabling Network Services in Oracle Database 11g. Also refer to the troubleshooting section in case you receive an ORA-44416: Invalid ACL error after running the previous script.

REgarding licensing issues involvng 'Computername' and the use of UpperCase4 vs Lowercase Letters

Does any one know if it would cause problems for the Office 365 software license to be displayed as licensed to an ALL CAPS name like 'MY-FAVORITE-PC' but the computer itself shows the computer name to be 'my-favorite-pc"?
If it does, which one should I change? A couple of people here have had this same problem (which usually occurs when they change to using a different PC for their account) I have to Deactivate their Old PC namer and then install the licnse to
their New OC using whatever name it has.
On more than one system, this has resulted in various odd "failure to contact Microsoft server" issues when activating. The problem continues for 7 days and then their copy of Office starts showing reed warning bards and eventually gets totally
unusable.
However, if I uninstall the office, deactivate the license, and reinstall it once again, it install just fine and acts ok but invariably at some point, the same thing occurs.
On one of them I noticed the difference in the case of the letters used in the computer name and the license name. On others I am wondering about various software add ins for Outlook or some other 3rd part application causing the problem. Whatever
it is, it gets extremely annoying. Officer 365 apparently must run an activation sequence almost constantly while Office 2010 (and I presume 2013) ran it once and were done with it.
Searching Google I have found too many possible reasons along with a lot of people who have had the same problems but no one seems to have the 100% solution. This has only started happening since we switched to Office 365 and only
seems to occur on systems that are changed out to different ones with the same User's 365 Account which is in good standing and has 5 available licenses of which only one is in use.
In the case of the caps vs lowercase I also wonder if changing the name to CAPS on their PC would create additional problems on its own?

Hi Questorfla,
For the Office 365 software license issue, I recommend you can post in dedicated Office 365 Forum to get a better response:
http://community.office365.com/en-us/f/148.aspx
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang

I am getting this response when I am trying to open a file: Before viewing PDF documents in this browser you must launch Adobe Reader and accept the End User License Agreement, then Quit and relaunch the browser." What do I do?

I am getting this response when I am trying to open a file: Before viewing PDF documents in this browser you must launch Adobe Reader and accept the End User License Agreement, then Quit and relaunch the browser.” What do I do? I have opened this up in the past without a problem.

Back up all data.
If Adobe Reader or Acrobat is installed, there should be a setting in its preferences such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected. Otherwise do as follows.
Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present. The same goes for a plugin called "iGetter," and perhaps others.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

How to view PDF documents because say you must launch adobe reader and accept the end user license

I have a question about to display the PDF documents, could you tell me how can I display it?, I have this message that say before viewing PDF documents in this browser you must launch Adobe Reader and accept the End User License Agreement, then Quit and relaunch the browser

I've got the same issue and I want to use Preview to read pdfs on Safari. At some point I had Acrobat Reader installed, but deleted it and everything associated with it. However no matter what, I get: "Before launching pdf documents in this browser you must launch Adobe Reader and accept the end user license agreement, then quit and relaunch the browser."
This means I am forced to use Reader, when I don't want to. There seems no way to default to Preview to read pdfs on Safari, even after deleting Adobe Reader completely.
Anyone have a clue how to fix this?

Acrobat Pro XI problem+Accept End User License Agreement when opening a PDF inside IE

Hi folks, this issue has been challenging.
Acrobat Pro CC install
W7 X64
Deployment went ok after the code was worked out, but.....
We use Desire to Learn content management system at the community college where I maintain the student computers at. When running D2L and a PDF has been embedded in some course material, I am getting the message below and the PDF won't open.
“Before proceeding you must first launch Adobe Acrobat and accept the End User License Agreement" .
The only fix so far is to run up Acrobat Pro and run the program once. Fine and dandy, but we are looking at 700+ machines to clear in this fashion. The other part of this scenario we we also utilize Respondus Lockdown Browser to invigilate exams through D2L. Because of the "lock down" features, the student can't even get back to the desktop to run Acrobat and clear the message.
I have tried a number of GPO entries to no avail. As well, disabled the IE PDF viewer add-on. I ran Procmon with no results either; .
I have been scouring the Googlemachine and building on the GPO below to get around the issue with no results. I am hoping someone with a sharper eye than I can spot something or point me in the correct direction..
Thanks eh.
GPLabs-Acrobat Reader default .PDF file open
Computer Configuration (Enabled)
Policies
Administrative Templates
Policy definitions (ADMX files) retrieved from the central store.
Adobe Acrobat XI/Preferences/General
Policy         Setting       Comment
Show messages when I launch Acrobat                                      Disabled
Adobe Reader XI/Preferences/General
Policy         Setting       Comment
Show messages when I launch Reader                                      Disabled
Adobe Reader XI/Preferences/Startup
Policy         Setting       Comment
Enable Protected Mode at startup                                                Disabled
Preferences
Windows Settings
Registry
ELUA=1 (Order: 1)
General
Action        Update
Properties
Hive HKEY_CURRENT_USER (HKU\.DEFAULT)
Key path    Software\Adobe\Acrobat Reader\11.0\AdobeViewer
Value name        ELUA=1
Value type           REG_DWORD
Value data           0x1 (1)
Common
Options
Stop processing items on this extension if an error occurs on this item                No
Remove this item when it is no longer applied                                                         No
Apply once and do not reapply                                                                        No
EULAAcceptedForBrowser (Order: 2)
General
Action                                                                  Update
Properties
Hive                                                                     HKEY_CURRENT_USER (HKU\.DEFAULT)
Key path                                                              Software\Adobe\Adobe Acrobat\11.0\AdobeViewer
Value name                                                        EULAAcceptedForBrowser
Value type                                                           REG_DWORD
Value data                                                           0x1 (1)
Common
Options
Stop processing items on this extension if an error occurs on this item                           No
Remove this item when it is no longer applied                                                                 No
Apply once and do not reapply                                                                                             No
ELUA=1 (Order: 3)
General
Action                                                                  Update
Properties
Hive                                                                     HKEY_CURRENT_USER (HKU\.DEFAULT)
Key path                                                              Software\Adobe\Acrobat Reader\10.0\AdobeViewer
Value name                                                        ELUA=1
Value type                                                           REG_DWORD
Value data                                                           0x1 (1)
Common
Options
Stop processing items on this extension if an error occurs on this item                          No
Remove this item when it is no longer applied                                                                   No
Apply once and do not reapply                                                                                  No
EULAAcceptedForBrowser (Order: 4)
General
Action                                                                  Update
Properties
Hive                                                                     HKEY_CURRENT_USER (HKU\.DEFAULT)
Key path                                                              Software\Adobe\Adobe Acrobat\10.0\AdobeViewer
Value name                                                        EULAAcceptedForBrowser
Value type                                                           REG_DWORD
Value data                                                           0x1 (1)
Common
Options
Stop processing items on this extension if an error occurs on this item                                   No
Remove this item when it is no longer applied                                                                            No
Apply once and do not reapply                                                                                             No
bBrowserIntegration (Order: 5)
General
Action                                                                           Update
Properties
Hive                                                                               HKEY_CURRENT_USER (HKU\.DEFAULT)
Key path                                                                       Software\Adobe\Acrobat Reader\11.0\Originals
Value name                                                                  bBrowserIntegration
Value type                                                                    REG_SZ
Value data                                                                    00000000
Common
Options
Stop processing items on this extension if an error occurs on this item                                   No
Remove this item when it is no longer applied                                                                            No
Apply once and do not reapply                                                                                             No
bBrowserIntegration (Order: 6)
General
Action                                                        Update
Properties
Hive                                                                               HKEY_CURRENT_USER (HKU\.DEFAULT)
Key path                                                                       Software\Adobe\Acrobat Acrobat\11.0\Originals
Value name                                                                  bBrowserIntegration
Value type                                                                    REG_SZ
Value data                                                                    00000000
Common
Options
Stop processing items on this extension if an error occurs on this item                                   No
Remove this item when it is no longer applied                                                                            No
Apply once and do not reapply                                                                                             No
bBrowserIntegration (Order: 7)
General
Action                                                        Update
Properties
Hive                                                                               HKEY_CURRENT_USER (HKU\.DEFAULT)
Key path                                                                       Software\Adobe\Acrobat Reader\10.0\Originals
Value name                                                                  bBrowserIntegration
Value type                                                                    REG_SZ
Value data                                                                    00000000
Common
Options
Stop processing items on this extension if an error occurs on this item                                             No
Remove this item when it is no longer applied                                                                                       No
Apply once and do not reapply                                                                                                      No
User Configuration (Enabled)
Preferences
Windows Settings
Registry
ELUA (Order: 1)
General
Action                                                        Update
Properties
Hive                                                                               HKEY_CURRENT_USER
Key path                                                                       Software\Adobe\Acrobat Reader\11.0\AdobeViewer
Value name                                                                  ELUA
Value type                                                                    REG_DWORD
Value data                                                                    0x1 (1)
Common
Options
Stop processing items on this extension if an error occurs on this item                                             No
Run in logged-on user's security context (user policy option)                                                   No
Remove this item when it is no longer applied                                                                                       No
Apply once and do not reapply                                                                                                      No
ELUA (Order: 2)
General
Action                                                                  Update
Properties
Hive                                                                               HKEY_CURRENT_USER
Key path                                                                       Software\Adobe\Acrobat Reader\10.0\AdobeViewer
Value name                                                                  ELUA
Value type                                                                     REG_DWORD
Value data                                                                    0x1 (1)
Common
Options
Stop processing items on this extension if an error occurs on this item                                             No
Run in logged-on user's security context (user policy option)                                                   No
Remove this item when it is no longer applied                                                                                       No
Apply once and do not reapply                                                                                                      No
.pdf (Order: 3)
General
Action                                              Update
Properties
Hive                                                  HKEY_CURRENT_USER
Key path                                           software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.pdf
Common
Options
Stop processing items on this extension if an error occurs on this item                                   No
Run in logged-on user's security context (user policy option)                                          No
Remove this item when it is no longer applied                                                                            No
Apply once and do not reapply                                                                                             No
OpenWithList] (Order: 4)
General
Action                                                                                     Update
Properties
Hive                     HKEY_CURRENT_USER
Key path              Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.PDF\OpenWithList]
Value name        (Default)
Value type           REG_SZ
Value data           "AcroRd32.exe"
Common
Options
Stop processing items on this extension if an error occurs on this item                                   No
Run in logged-on user's security context (user policy option)                                          No
Remove this item when it is no longer applied                                                                            No
Apply once and do not reapply                                                                                             No
Control Panel Settings
Folder Options
Open With (Extension: pdf, Program: C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe)
pdf (Order: 1)
General
Action                                              Update
Properties
File Extension                                 pdf
Associated Program                      C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe
Set as default                                  Enabled
Common
Options
Stop processing items on this extension if an error occurs on this item                                   No
Run in logged-on user's security context (user policy option)                                          Yes
Remove this item when it is no longer applied                                                                            No
Apply once and do not reapply                                                                                             No
Open With (Extension: pdf, Program: C:\Program Files (x86)\Adobe\Reader 10.0\Reader\AcroRd32.exe)
pdf (Order: 2)
General
Action                                              Update
Properties
File Extension                                 pdf
Associated Program                      C:\Program Files (x86)\Adobe\Reader 10.0\Reader\AcroRd32.exe
Set as default                                  Enabled
Common
Options
Stop processing items on this extension if an error occurs on this item                                   No
Run in logged-on user's security context (user policy option)                                          Yes
Remove this item when it is no longer applied                                                                            No
Apply once and do not reapply                                                                                             No

Hi technobyte,
Try using APTEE to do EULA suppression and check.
You might want to refer the docs:
Creative Cloud Help | Using Adobe Provisioning Toolkit Enterprise Edition
4   Installation Workflows — Enterprise Administration Guide
Regards,
Rave

Have the Adobe Muse CC (2014) licensing issues been resolved?

Have the Adobe Muse CC (2014) licensing issues been resolved?
I am patiently waiting for some word on whether I can go ahead a install the new version of Muse CC (2014) software on my systems without running into the quagmire that so many are experiencing. I simply can't afford to run the risk that I will be stuck with a "trial version" for the next 30 days without some assurance from Adobe that they will be able to solve the problems in that time frame. It would be nice if adobe would send out an email that explains the situation to all of it's users so we know what's going on and when the issue is resolved. Collectively we all pay a lot money for these "updates", so I don't think it's to much to ask.
Kind Regards,
wrgould
PS: Please reference this forum discussion - Muse CC 2014 wants Serial Number, though i pay monthly for muse

A screenshot of the error when a site is opened. I've reinstalled, restarted.. etc. Thanks! J

Please clarify the following license issue

Hello
Please clarify the following license issue
Oracle 10g se license requirement while using a power 6 P520 machine with 2-core 4.2 GHz processor card,4 memory DIMM slots. Are we entitled for paying for one oracle 10g SE license?
many thanks in advance

When you read through that thread, did you see where I linked to and quoted the licensing definitions
Processor: shall be defined as all processors where the Oracle programs are installed and/or running. Programs licensed on a processor basis may be accessed by your internal users (including agents and contractors) and by your third party users. For the purpose of counting the number of processors which require licensing for a Sun UltraSPARC T1 processor with 4, 6 or 8 cores at 1.0 gigahertz or 8 cores at 1.2 gigahertz for only those servers specified on the Sun Server Table which can be accessed at http://oracle.com/contracts , “n” cores shall be determined by multiplying the total number of cores by a factor of .25. For the purposes of counting the number of processors which require licensing for AMD and Intel multicore chips, “n” cores shall be determined by multiplying the total number of cores by a factor of .50. For the purposes of counting the number of processors which require licensing for all hardware platforms not otherwise specified in this section, a multicore chip with "n" cores shall be determined by multiplying "n" cores by a factor of .75. All cores on all multicore chips for each licensed program for each factor listed below are to be aggregated before multiplying by the appropriate factor and all fractions of a number are to be rounded up to the next whole number. When licensing Oracle programs with Standard Edition One or Standard Edition in the product name, a processor is counted equivalent to a socket.
It appears that you fall under the "not otherwise specified" category because you're not dealing with an UltraSPARC T1 (multiplier 0.25) or an AMD/ Intel chip (multiplier 0.5) so your multiplier would be 0.75.
0.75 * 2 cores = 1.5 processors which would have to be rounded up to 2 processors. If you had 4 total cores, you would only need a 3 processor license.
Justin

Weblogic 5 user license-Issue

Similar Messages

Maybe you are looking for