WebLogic 6.0 as NT Service on Windows 2000

I started the WebLogic 6.0 as NT service. After it was started i tried to access the administrator console through the web browser. I always get "Cannot find server" or "DNS Error".If I start weblogic using the startWebLogic.cmd, the admin console seems to work fine.Also when WebLogic 6.0 is installed as an NT service, do i need to specify any startup parameters?I would appreciate your responses.ThanksShyam

Hi Dan,
Unfortunatly Sander was right. I had exactly the same problem. I couldn't open
Console (there was no socket 7001 in netstat -a). After creation password.ini
everything is OK (except that password is in clear text)
Maciek
Dan Bai <[email protected]> wrote:
I am not quite sure it is a password problem because that should occur
at the
service startup time. As a matter of fact, NT service does not need
a
password.ini file as long as you have not changed your password after
the
installation.
Can you access the console at the local NT machine where the NT service
is
running using IP address 127.0.0.1 instead of a DNS name? Actually,
you can
do this by simply using the startup menu icon "Start Default Console".
-Dan
Sander Zwienink wrote:
You need to specify the password to start te server, you can do thisby
putting the password in a file called password.ini
You can put this file in the same directory where you start Weblogic
Please be aware of the fact that WL as a NT service stops when youlog-on
and off the machine. This is due to a problem with the current JDK(1.3.0)
According to other posting in this newsgroup Sun will change this behaviour
in the upcoming JDK 1.3.1
Sander
"shyam krishnamurthy" <[email protected]> wrote in message
news:3acb4e61$[email protected]..
I started the WebLogic 6.0 as NT service. After it was started i
tried to
access the administrator console through the web browser. I alwaysget
"Cannot find server" or "DNS Error".If I start weblogic using the
startWebLogic.cmd, the admin console seems to work fine.Also when WebLogic
6.0 is installed as an NT service, do i need to specify any startup
parameters?I would appreciate your responses.ThanksShyam

Similar Messages

Weblogic as Service on Windows 2000

I am running a WLS as a service on a Windows 2000 server and have integrated Hibernate
using EJBs. Hibernate relies on a config file residing in the application root
directory. When run from the command prompt this config file can be found by WLS
in the root domain directory.
When run as a service the file can not be found. Where is the domain root when
run as a service.
Thanks

According to BEA, you cannot clear the existing classpath. The variables
set by WLCONFIG are stored in the registry but the classpath is not. It is
built on the fly. It takes the variables JAVA_HOME, WEBLOGIC_HOME,
WEBLOGIC_LICENSEDIR, and CLASSPATH Prefix which are configurable through the
use of WLCONFIG to build the classpath.
You can also clear the CLASSPATH Prefix to "" which will clear the first
entry in your classpath.
Hope that helps..
"Raghu Mani" <[email protected]> wrote in message
news:39d9dc80$[email protected]..
When I use wlconfig to setup the "classpath", it only prepends to existingclasspath (which is incorrect). How can I set it? I can set the
weblogic.class.path without a problem. I need to be able to run it as a
service under windows 2000.

Running OC4J as a service in Windows 2000

I've been trying to have OC4J run as a service in Windows 2000, as having to be logged in isn't very flexible.
I've searched the net, and I found a tool by Microsoft called srvany.exe/instsrv.exe, which should install any program as a service. It works, but the service shuts down whenever I log off, which defeats the purpose.
What I've done is run the command line
instsrv "Oracle Application Server" C:\Progs\Service\srvany.exe
and then edit the registry settings under the newly created folder to
Application=C:\Progs\Oracle 9i AS\j2ee\home\java
AppParameters=-jar oc4j.jar
AppDirectory=C:\Progs\Oracle 9i AS\j2ee\home
Does anyone know this tool well enough to tell me what I'm doing wrong, or know something else I can use?
Brigt Olav Vik

Hi
Have managed to run oc4j as a service as follows under xp pro
Download runexescv from http://www.judoscript.com/goodies/index.html
Unpack and run
Create service say OracleOc4j
Needs basic parameters setup
Cmdline and Home
My setup is
debug=false
cmdline=c:\ora9ias\jdk\bin\java - Dorg.omg.CORBA. ORBClass=com.inprise.vbroker.orb.ORB -Dorg.omg.CORBA.ORBSingletonClass=com.inprise.vbroker.orb.ORB -Doracle.security.jazn.config=c:\ora9ias\j2ee\Oracle9iDS\config\jazn.xml -Doracle.home=c:\ora9ias -DORACLE_HOME=c:\ora9ias -jar c:\ora9ias\j2ee\home\oc4j.jar -userThreads -config c:\ora9ias\j2ee\Oracle9iDS\config\server.xml
( all from startinst.bat )
home=C:\ora9ias\j2ee\home\
Save and close
Oracleoc4j will now be set up as service
Change service to auto and start service !!
Appears to be neat and easy way of setting up an OC4J service
Ian

I cannot start my OMS service on Windows 2000

I tried starting Oracle8i OMS Service on Windows 2000. I cannot
start it automatically so I started it manually. But Irecieved
an error message saying No application Error, some configuration
error with the Operating System.
On searching forums for DBAs i recieved a solution to manually
start by command 'oemctrl start OMS'. It did not help either as
the resources.ora file was not present at the location
C:\Oracle\admin\orb\resources.ora .
I found a resources.ora at location c:\oracle\ora81
\orb\admin\resources.ora but this file is empty.
NOW Wwith the command 'oemctrl start OMS' I am getting the
following error msg. Please send me the answer if possible at
[email protected]. WHERE Can I find the content for
resources.ora??
C:\Documents and Settings\Administrator>oemctrl start OMS
OEMCTRL for Windows NT: Version 2.1.0.1.0
Copyright (c) 1998, 1999 Oracle Corporation. All rights
reserved.
Starting the Oracle Management Server... [main][2001-11-
10:12:28:10:630] VdbSess
ion.processError: errorCode >1017<
[main][2001-11-10:12:28:10:710] VdbSession.processError:
errorMsg >ORA-01017: i
nvalid username/password; logon denied
<
[main][2001-11-10:12:28:10:830] ORA-01017: invalid
username/password; logon den
ied
: ..../....@jdbc:oracle:oci8:@(DESCRIPTION=(ADDRESS=
(PROTOCOL=TCP)(Host=linux)(P
ort=1521))(CONNECT_DATA=(SID=oradb)))
[main][2001-11-10:12:28:10:970] VdbSession.processError:
invalid connect string
[main][2001-11-10:12:28:11:381] VdbSession.processError:
errorCode >1017<
[main][2001-11-10:12:28:11:421] VdbSession.processError:
errorMsg >ORA-01017: i
nvalid username/password; logon denied
<
[main][2001-11-10:12:28:11:541] ORA-01017: invalid
username/password; logon den
ied
: ..../....@jdbc:oracle:oci8:@(DESCRIPTION=(ADDRESS=
(PROTOCOL=TCP)(Host=linux)(P
ort=1521))(CONNECT_DATA=(SID=oradb)))
[main][2001-11-10:12:28:11:691] VdbSession.processError:
invalid connect string
[main][2001-11-10:12:28:12:102] VdbSession.processError:
errorCode >1017<
[main][2001-11-10:12:28:12:142] VdbSession.processError:
errorMsg >ORA-01017: i
nvalid username/password; logon denied
<
[main][2001-11-10:12:28:12:262] ORA-01017: invalid
username/password; logon den
ied
: ..../....@jdbc:oracle:oci8:@(DESCRIPTION=(ADDRESS=
(PROTOCOL=TCP)(Host=linux)(P
ort=1521))(CONNECT_DATA=(SID=oradb)))
[main][2001-11-10:12:28:12:413] VdbSession.processError:
invalid connect string
[main][2001-11-10:12:28:12:493]
Error starting Oracle Management Server.

I got the same problem.

Running Essbase 6.1 as a service on Windows 2000

OK, what's the scoop about running Essbase 6.1 as a service on Windows 2000?Besides not seeing the graphic interface, are there any issues? Are there any issues with shutting down the Essbase server by either clicking "Stop" in the Services panel or issuing a Net Stop service command?Finally, has anyone successfully used Microsoft's "Srvany" utility to run Essbase as a service yet still display the graphic windows?Do most of y'all on NT or 2000 run as a service or as an app?

Just a little extra information about running Essbase as a Service. We are running on NT 4.0. If one application is causing a problem, you can kill the one application without having to reboot the server. You will need to know which application is causing your problem and You will need to know it's "process id". If you can't find the right process id by looking at "tlist", you can look in the ESSBASE.LOG. Start at the bottom of the log and search backwards for the text "started with process id". When you find the process id of the problem application, you can then kill it at the DOS prompt by typing "kill ###", where ### is the process id.This is helpful for us because we have about 10 applications on one server and we don't want to have to take all of Essbase down just for one application. Hope this is helpful to someone.

How to run jar as a service on windows 2000 server?

Hi,
I built a console jar program and want to run it as a service on windows 2000 server.
May I ask how can I do it?
Thanks

Take a look at something called java service wrapper ,
http://wrapper.tanukisoftware.org/doc/english/introduct
on.htmlNot seen that one before. Ta.
Alexandria software used to support a simpler app called JavaService... google for that maybe if the above is too much.
/k1

Cannot run Apatche and FullFilment services on Windows 2000.

Hi,
We are using Oracle EBS 11i with database 9i.
Today morning we had face virus attacked on ERP server.
We have windows env and single node installation.
After restoration of backup We are unable to start the following serviices on windown env:
This is production system.
Please assist ASAP.
Log: of starting services of application and our dattabase is working fine.
Setting service Oracle Apache Server PROD_styloapps to mode 2
Executing service control script:
d:\oracle\prodcomn\admin\scripts\PROD_styloapps\adapcctl.cmd start
Timeout specified in context file: 100 second(s)
script returned:
ECHO is off.
ECHO is off.
Sat 02/12/2011 01:15 AM
Starting Oracle Apache Server PROD_styloapps ...
adapcctl.cmd exiting with status 2
.end std out.
The service is not responding to the control function.
More help is available by typing NET HELPMSG 2186.
.end err out.
Setting service OraclePRODOra806_1TNSListener80APPS_PROD to mode 2
Executing service control script:
d:\oracle\prodcomn\admin\scripts\PROD_styloapps\adalnctl.cmd start
Timeout specified in context file: 100 second(s)
script returned:
ECHO is off.
ECHO is off.
Sat 02/12/2011 01:15 AM
ECHO is off.
The environment settings are as follows ...
ECHO is off.
ORACLE_HOME : d:\oracle\prodora\8.0.6
LOCAL : PROD
ORACLE_SID :
PATH : d:\oracle\prodora\8.0.6\bin;d:\oracle\prodcomn\util\java\1.4\j2sdk1.4.2_04\bin;d:\oracle\prodappl\au\11.5.0\bin;d:\oracle\prodappl\fnd\11.5.0\bin;d:\oracle\prodappl\ad\11.5.0\bin;d:\oracle\prodcomn\util\java\1.4\j2sdk1.4.2_04\bin;d:\oracle\prodora\iAS\Apache\perl\5.00503\bin\MSWin32-x86\;d:\oracle\prodcomn\util\unzip\unzip;d:\oracle\prodora\8.0.6\bin;d:\oracle\prodcomn\util\java\1.4\j2sdk1.4.2_04\bin;C:\VC98\msdev98\BIN;C:\MICROS~1\VC98\BIN;C:\VC98\TOOLS\WINNT;C:\VC98\TOOLS;d:\oracle\prodappl\au\11.5.0\bin;d:\oracle\prodappl\fnd\11.5.0\bin;d:\oracle\prodappl\ad\11.5.0\bin;d:\oracle\prodcomn\util\java\1.4\j2sdk1.4.2_04\bin;d:\oracle\prodora\iAS\Apache\perl\5.00503\bin\MSWin32-x86\;d:\oracle\prodcomn\util\unzip\unzip;d:\oracle\prodora\8.0.6\bin;d:\oracle\prodcomn\util\java\1.4\j2sdk1.4.2_04\bin;C:\MKSNT\bin;C:\WINDOWS;C:\WINDOWS\system32
LD_LIBRARY_PATH : d:\oracle\prodora\8.0.6\lib
ECHO is off.
The service "OraclePRODOra806_1TNSListener80APPS_PROD" is already started
adalnctl.cmd exiting with status 0
.end std out.
.end err out.
Setting service OracleConcMgrPROD_styloapps to mode 2
Executing service control script:
d:\oracle\prodcomn\admin\scripts\PROD_styloapps\adcmctl.cmd start
Timeout specified in context file: 1000 second(s)
script returned:
ECHO is off.
ECHO is off.
Sat 02/12/2011 01:15 AM
Starting concurrent manager for PROD ...
adcmctl.cmd exiting with status 0
.end std out.
.end err out.
Setting service OracleFormsServer-Forms60PROD_styloapps to mode 2
Executing service control script:
d:\oracle\prodcomn\admin\scripts\PROD_styloapps\adfrmctl.cmd start
Timeout specified in context file: 100 second(s)
script returned:
ECHO is off.
ECHO is off.
Sat 02/12/2011 01:15 AM
ECHO is off.
ECHO is off.
Starting forms server for PROD on port 9000 ...
adfrmctl.cmd exiting with status 2
.end std out.
The service is not responding to the control function.
More help is available by typing NET HELPMSG 2186.
.end err out.
Setting service OracleReportServer-Rep60_PROD to mode 2
Executing service control script:
d:\oracle\prodcomn\admin\scripts\PROD_styloapps\adrepctl.cmd start
Timeout specified in context file: 100 second(s)
script returned:
ECHO is off.
ECHO is off.
Sat 02/12/2011 01:15 AM
The service "OracleReportServer-Rep60_PROD" is already started
adrepctl.cmd exiting with status 0
.end std out.
.end err out.
Setting service Oracle Metrics Client PROD_styloapps to mode 2
Executing service control script:
d:\oracle\prodcomn\admin\scripts\PROD_styloapps\adfmcctl.cmd start
Timeout specified in context file: 100 second(s)
script returned:
ECHO is off.
ECHO is off.
Sat 02/12/2011 01:15 AM
The service "Oracle Metrics Client PROD_styloapps" is already started
adfmcctl.cmd exiting with status 0
.end std out.
.end err out.
Setting service Oracle Metrics Server PROD_styloapps to mode 2
Executing service control script:
d:\oracle\prodcomn\admin\scripts\PROD_styloapps\adfmsctl.cmd start
Timeout specified in context file: 100 second(s)
script returned:
ECHO is off.
ECHO is off.
Sat 02/12/2011 01:15 AM
The service "Oracle Metrics Server PROD_styloapps" is already started
adfmsctl.cmd exiting with status 0
.end std out.
.end err out.
Setting service Oracle Fulfillment Server PROD_styloapps to mode 2
Executing service control script:
d:\oracle\prodcomn\admin\scripts\PROD_styloapps\jtffmctl.cmd start
Timeout specified in context file: 100 second(s)
script returned:
You are running jtffmctl.cmd
Sat 02/12/2011
01:15 AM
"Starting Fulfillment Server for "PROD" on port "9300" ...\n"
jtffmctl.cmd exiting with status 2
ERRORCODE = 2 ERRORCODE_END
.end std out.
The service is not responding to the control function.
More help is available by typing NET HELPMSG 2186.
.end err out.
[Service Control Execution Report]
The report format is:
<Service> <Script> <Status>
Oracle Apache Server PROD_styloapps adapcctl.cmd Started
OraclePRODOra806_1TNSListener80APPS_PROD adalnctl.cmd Started
OracleConcMgrPROD_styloapps adcmctl.cmd Started
OracleFormsServer-Forms60PROD_styloapps adfrmctl.cmd Started
OracleReportServer-Rep60_PROD adrepctl.cmd Started
Oracle Metrics Client PROD_styloapps adfmcctl.cmd Started
Oracle Metrics Server PROD_styloapps adfmsctl.cmd Started
Oracle Fulfillment Server PROD_styloapps jtffmctl.cmd Already Started
Oracle Restricted Apache Server PROD_styloapps adaprstctl.cmd Disabled
Oracle Apache Server PROD_styloapps for PL/SQL adapcctl.cmd Disabled
Oracle TCF SocketServer PROD_styloapps adtcfctl.cmd Disabled
Oracle ICSM PROD_styloapps ieoicsm.cmd Disabled
Oracle iProcurement Bulk Loader PROD_styloapps icxblkctl.cmd Disabled
ServiceControl is exiting with status 0
Thanks,
Fayaz

After restoration of backup We are unable to start the following serviices on windown env:
This is production system.
Please assist ASAP.For production issues, please log a SR with severity 1.
Please run AutoConfig and make sure it completes successfully.
Also, check the startup log files for details about the error.
Thanks,
Hussein

Running Weblogic6.0 SP2 as a Service on Windows 2000 failes!?

I installed j2sdk1.3.1. I have allso checked 'Interact with desktop' box and inserted
-Xrs option in
'set CMDLINE' variable in installNtService.cmd - file. Despite all these Service
dies after 10 seconds.
What else can I to do?

Another thing to consider is that you have not set the password in the
installNTService.cmd.
To do this add the following:
rem *** Install the service
"D:\weblogic\wlserver6.0\bin\beasvc" -install -svcname:myserver -javahome:"D
:\weblogic\jdk130" -execdir:"D:\weblogic\wlserver6.0" -extrapath:"D:\weblogi
c\wlserver6.0\bin" -cmdline:%CMDLINE% -password:"yourpwdhere"
Notice the -password:"yourpwdhere"
Regards,
Eric
"Jarkko Senne" <[email protected]> wrote in message
news:3b7a1a93$[email protected]..
>
I installed j2sdk1.3.1. I have allso checked 'Interact with desktop' boxand inserted
-Xrs option in
'set CMDLINE' variable in installNtService.cmd - file. Despite all theseService
dies after 10 seconds.
What else can I to do?

Running OC4J as Windows 2000 service

Can I configure OC4J Instance to run as a service on Windows 2000.
1) How can I do that ?
2) If not possible, why can I not do that ?
3) If possible, Why should I not do that ?
Thanks,

Sorry, but I can not access the above link. Is this link still active.
<<<<<
The page cannot be displayed
There is a problem with the page you are trying to reach and it cannot be displayed.
>>>>>>

Shared variable engine with pro-face touchscreen windows 2000 professional

hello,
who has some experience with the shared variable engine from LabView 8.5 and a touchpanel from Pro-Face?
We try to deploy shared variables from the touchpanel but it doesn't work. Additionally the windows service ni shared variable engine dosn't start and we can't start it manually .
The touchpanel is a PS3701A from Pro-Face with Windows professional 2000 for embedded, Pro-Face told us that we have the full service of Windows 2000 professional on a regular PC.
Many thanks in advance
derN

Hi Andrew,
Thanks for the feedback! Your feedback will help us to improve LabVIEW for our customers. This bug has been reported to R&D (#45493) and they are currently investigating this issue. For now, the best workaround appears to be using a different OS, as this seems to only occur in Windows 2000. Thanks for the feedback!

Executing notepad in jsp (WIndows 2000)

Hey,
I've been playing around with the Runtime API and have run into problem. I want to eventually run a C program through a JSP page, but I can't even get notepad to open successfully. Below is the entire test code that is supposed to open notepad. When I open this JSP page in Windows 2000, nothing happens. The GUI for notepad is never opened. However, I checked the task manager and there is an instance of notepad there, and when I try to end the process it gives me an error saying that access is denied. I wrote a simple java program with similar code, and I am able to successfully open notepad through it. I can't see what I'm doing wrong here. Anyone else have this problem on Windows 2000? Thanks.
<%@ page import="java.io.*" %>
<%
     Runtime r = Runtime.getRuntime();
     try {
          Process p = r.exec("notepad");
     } catch (Exception e) {
          System.out.println("Error");
%>
<html>
...html code...
</html>
Jason

I've finally determined the cause of all my troubles. It turns out that if Tomcat is running as a service on Windows 2000, it can't access the console and as a result it can't call external programs. I turned off the service temporarily and started up the stand-alone Tomcat application and my JSP pages work without a hitch. Unfortunately, I think they'll want to keep Tomcat as a service, so I haven't completely solved all of my problems. So does anyone know of a way to execute external programs using Runtime.exec() while running Tomcat as a service? Thanks.
Jason

WebLogic as Windows 2000 service over s shared file system

I am trying to install weblogic as a Windows 2000 service over a
shared file system with no sucess
(the shared fie system is provided by windows 2000 cluster services).
I am using the srvany utility to have the script that launches
weblogic be run as a service (I need this
because I must launch 2 instances of weblogic in the same machine
as services, i cannot do this
with the bea service tools, having different configurations for
the classpath, or can I?)
The service works if weblogic is not installed in a shared file
system.
On the shared file system, it fails (The service fails, is unabble
to start). I also made a script on the local file
system, that calls the weblogic script on the shared file system,
but weblogic fails to start (with no
message) when loading from the weblogic.classpath
thanks for your attenction,
Bruno Antunes
WhatEverSoft - Java Center

I have also tried running the service with the bea tools, with no
sucess when running in
the shared file system.
When i start the service, it seems to start ok, then stops. with
no message.
Nothing is written to the log, any ideas?
Bruno Antunes
WhatEverSoft - Java Center

How to configure Oracle WebLogic NodeManager as a MS service

Hi Experts,
I installed OBIEE 11.1.1.5, and i want to configure OBIEE start/stop as windows services.
for that and after a successful configuration, Oracle configure by default two windows services: Weblogic Node Manager and FMW 11g Process Manager (OPMN).
The problem is that Weblogic Node Manager is missing as a widows service.
How can i do to create and configure it manually, please.
Thank in advance.
Best regards,
Hassan C
Edited by: 972869 on 23 nov. 2012 03:27
Edited by: 972869 on 23 nov. 2012 03:28
Edited by: 972869 on 23 nov. 2012 05:09

Hi,
i see it, but that is for install Admin and manage server, what i'm asking for is Oracle weblogic NodeManager.
the windows service i need is named "oracle WebLogic NodeManager (e_obiee11_wlserver_10.3)" or somethiing like that, is the first in the page of your link:
Weblogic Node Manager
*(configured as a MS Windows Service if Custom Install route is chosen when installing Weblogic)*
I'm asking how to create it.
Thank you.
Edited by: 972869 on 23 nov. 2012 05:14

Weblogic Server 6.1 with MS Windows 2000 Cluster

Hello everybody,
following situation:
We want to implement a Microsoft Cluster (Failover) with MS Cluster Service and
2 nodes (maybe later we try the Weblogic Software clustering with load balancing
as a part of an documentum and infotehna DMS). On both nodes we made the same
test installation of the Weblogic Server 6.1 and started it with services (instead
of cmd-file).
It's working fine seperate on every node, than we started to implement the MSCS
on these machines and only one node is working. On the other node (after a failover
to this node) the service started but break down only a few seconds later.
Now, my question is: Can we use the Weblogic Server 6.1 in an Windows 2000 Advanced
Server Failover Cluster with 2 nodes? Or do we need a special Add-on to do this???
Best regards,
Ronny

Ronny,
I'm don't know the specifics of MS Cluster Service but given that it works like
other common HA frameworks (assumption on my part) you may need to use the MS
cluster framework in isolation from the 'software-based' clustering approach that
WLS 6.x currently provides. For example, in other HA Frameworks there is typically
a heartbeat mechanism that informs the framework that a node is dead and the framework
in turn calls scripts that migrate the failed node 'applications' over to the
healthy node. In WLS, you could mimic the same approach where a single admin
server fails over to a backup server not using the WLS 'software' admin/mgd server
cluster value-add. In others words, you would need to script a heartbeat mechanism
for the single WLS server and also script failover to a backup node when the heartbeat
indicates 'failure'. This technique would be used in isolation (not using the
current WLS software-based cluster configuration).
My 2 cents,
Chuck Nelson
DRE
BEA Technical Support

Error Starting Weblogic Server as a Win2K service

Hi
I am unable to start Weblogic Server 6.1 as a Windows 2000 Server
service. Installation as NT service is successful and I used the password as
"weblogic" for the system user. But then when I try to start the service it gives
the following error complaining about incorrect password for the system user.
####<Sep 11, 2002 11:39:11 AM EDT> <Info> <Logging> <LDSERV10> <myserver> <main>
<> <> <000000> <FileLogger Opened.>
####<Sep 11, 2002 11:39:13 AM EDT> <Error> <Security> <LDSERV10> <myserver> <main>
<> <> <090052> <Server installed as NT Service with incorrect password for user
system.>
####<Sep 11, 2002 11:39:13 AM EDT> <Emergency> <Server> <LDSERV10> <myserver>
<main> <> <> <000000> <Unable to initialize the server: 'Fatal initialization
exception
Throwable: java.lang.SecurityException: Authentication for user system denied;
contact your administrator to correct NT Service attributes
java.lang.SecurityException: Authentication for user system denied; contact your
administrator to correct NT Service attributes
     at weblogic.security.SecurityService.initializeSuid(SecurityService.java:308)
     at weblogic.security.SecurityService.initialize(SecurityService.java:118)
     at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:390)
     at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
     at weblogic.Server.main(Server.java:35)
'>
Please, any help is gratly appriciated.
Thanks
Babu

"Babu Arumugam" <[email protected]> wrote:
>
Hi
I forgot to add in my prevoius msg that I am able to start the weblogic
server
from the cmd propt with out any error. The problem is only when I try
to start
it as a windows service .
Thanks
babu
Have you resolved this yet?
I had the same problem, and read that if I add the
"-password <password>" argument to the "beasvc.exe" command
in the "intallNtService.cmd" script, the problem was resolved.
To do this, you will have to use the "uninstallNtServer.cmd"
script to uninstall the service, edit the install script to
add the "-password <password>" argument to the beasvc.exe
command, then run the "installNtService.cmd" script to install
the service.
For me, it now works.
Good luck.

WebLogic 6.0 as NT Service on Windows 2000

Similar Messages

Maybe you are looking for