WebLogic 6.0 looking for old IP address after DHCP assigned new IP

Hi All,
I installed WebLogic 6.0 on my desktop and it worked just fine
till the DHCP server assigned a new IP address to my desktop.
Now when I start the Example Server, I get the following.
"####<Mar 23, 2001 5:57:29 PM CST> <Notice> <WebLogicServer> <johnt1>
<examplesServer> <SSLListenThread> <system> <> <000202> <SSLListenThread
listening on port 7002>
####<Mar 23, 2001 5:59:56 PM CST> <Error> <ConnectionManager> <johnt1>
<examplesServer> <ExecuteThread-13> <> <> <000000> <Could not connect
to: '0S:10.97.20.69:[7001,-1,-1,-1,-1,-1,-1]'>
java.net.NoRouteToHostException: Operation timed out: no further
information
at java.net.PlainSocketImpl.socketConnect(Native Method)..."
Please note that 10.97.20.69 is my old IP address. I have a strong
feeling that this has something to do with cloudscape as the Default
Server starts up just fine. The server continues to run after
this exception is thrown and I can start the admin console.
Any thoughts ??
regards,
Tony.

I don't think it's about cloudscape. The same thing happens to me, and I
don't use cloudscape, or have any references to it in my config file.
I usually find that shutting down and restarting Weblogic once or twice
clears it up.
Tony wrote:
Hi All,
I installed WebLogic 6.0 on my desktop and it worked just fine
till the DHCP server assigned a new IP address to my desktop.
Now when I start the Example Server, I get the following.
"####<Mar 23, 2001 5:57:29 PM CST> <Notice> <WebLogicServer> <johnt1>
<examplesServer> <SSLListenThread> <system> <> <000202> <SSLListenThread
listening on port 7002>
####<Mar 23, 2001 5:59:56 PM CST> <Error> <ConnectionManager> <johnt1>
<examplesServer> <ExecuteThread-13> <> <> <000000> <Could not connect
to: '0S:10.97.20.69:[7001,-1,-1,-1,-1,-1,-1]'>
java.net.NoRouteToHostException: Operation timed out: no further
information
at java.net.PlainSocketImpl.socketConnect(Native Method)..."
Please note that 10.97.20.69 is my old IP address. I have a strong
feeling that this has something to do with cloudscape as the Default
Server starts up just fine. The server continues to run after
this exception is thrown and I can start the admin console.
Any thoughts ??
regards,
Tony.

Similar Messages

  • GPMC looks for old domain name after rename

    Greetings!
    I've renamed my domain after reading white papers on the subject. The process went well except when I try to open the Group Policy Management Console it says the domain doesn't exist. It offers to let me select a different domain controller but it's looking
    in the old domain. I can't change anything in the dialog to point it to the new domain name. I've tried from my Win 7 work station and from the domain controller with the PDC role. I moved that role to a different DC and get the same results. The domain is
    at Server 2008 functionality level but all DCs are Server 2012R2. I did run gpfixup for both the DNS name and NB name. The only errors it produces relate to old software group policies that no longer are used and the file path has been removed. I need to get
    this fixed. I'd even be willing to start fresh with just default polices but blowing up the domain and starting over isn't an option. Thanks for any suggestions offered.

    Thanks for your reply, Frank. Yes, all the steps were followed. The gpfixup was reporting errors and stating they were not fatal, but they were because the gp fix never completed. Evidently it renames sysvol and that never happened.
    It turns out the policies that gpfixup was dying on were long-abandoned policies that used DFS shares. I used ASDI Edit to find them and delete them. Then I was able to run gpfixup, which now completed successfully. Once that was done the GPMC would properly
    run and access the group policies.
    The actual domain rename went quite well and most users didn't notice this problem other than the workstations reverting to installing updates themselves instead of contacting my WSUS server.
    Mark Warbeck

  • I deleted my old email address and added a new one, after my iPhone died iCloud keeps popping up asking for the password of my old email address. I can't remember my password and the account is still gone, it pops up every few seconds. How can I fix this?

    I deleted my old email address and added a new one, after my iPhone died iCloud keeps popping up asking for the password of my old email address. I can't remember my password and the account is still gone, it pops up every few seconds. How can I fix this?

    If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact AppleCare(or Apple ID Support), upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
    The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
    The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
    Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
    Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
    Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.

  • Why tomcat is still looking for old jar files?

    Please help me it is a very serious problem.
    I updated one of the jar files used by the project. I am using a new method that is available only in the new library. I removed the old jar files in my local system, and everything worked fine. Then I commit those files to the subversion, which is in the testing server, and then I created the war file. The war is successfully created, then I deployed to the tomcat. But, now there is an error in the portion I am using the method that is only available in the new jar files.
    One of the error when I go to that portion is:
    1. No Such Method Exists
    The other errors on log files are:
    1.
    WARNING: Failed to open JAR
    java.util.zip.ZipException: No such file or directory
    2.
    validateJarFile(tomcat/webapps/ROOT/WEB-INF/lib/j2ee.jar) - jar not loaded. See Servlet Spe
    c 2.3, section 9.7.2. Offending class: javax/servlet/Servlet.class
    Please help me, I have tried every other way to solve this. I have tried removing all the old jar files there were, and replacing with the new one. I have tried creating a war file and ftping to the testing server.
    I problem is still there and it is because the testing server's tomcat is still looking for old jar files. I used Netbeans and add jar files as usual method.

    Check the contents of your WAR file that you are deploying on the testing server to see if it contains the JAR that you can't find.
    More than likely you are building your WAR file and your new JAR file is not being included in the build.

  • Old computer crashed.  trying to sync my iphone with new computer but phone is looking for old computer.  how do i change it?

    old computer crashed.  iphone is looking for old computer so I can't get it to sync with my new computer.  Suggestions?

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • How to delete my old email address and install the new one on an HP 4480 all in one.

    my HP 4480 uses my old email address to send scan to email.I need to delete the old email address and install my new one

    des7931,
    You should be able to go to your software on your computer and click on the >Scanner Actions section.
    Then click on>Scan to E-Mail Wizard
    This should bring up a screen to edit, change, or delete the stored email addresses for scan to email.
    Let us know if you don't see this or still have problems.
    If I helped you at all it would be great if you clicked the blue kudos star!
    If I solved your post please mark it as solved to help others.
    I'm a printer tech with HP.

  • HT2204 Changed e-mail address & Apple ID, verified by Apple. Itunes changed but cannot get Messages, Facetime or Icloud. Keep on throwing up old email address & won't accept new or old password.  Help needed!

    Changed e-mail address & Apple ID. Verified by Apple. Itunes & email working but cannot access Messages,Facetime & Icloud. Keep throwing up old email address & wont accept either new or old passwords. Anyone got a solution?

    Welcome to the Apple Community.
    Firstly, you need to change your details with Apple,  Start here, change your country if necessary and go to manage your account.
    In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
    Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
    In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)
    In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > iTunes & App store, scroll down and tap your ID)
    If you are using iMessages or FaceTime, you will also need to log out and into your ID there too.

  • WRT54GL V 1.1 : how to reserve IP for specific MAC address using DHCP

    My !free! made in China router have this functionality. And yet I have been banging my head with this new reasonably expensive wireless router from Linksys. Anyway I lug my notebook around. I need my home router to be able to automatically configure notebook IP address using DHCP. At the same time I need the ip given by home router through DHCP to be the same IP all the time. So "static" ip is not the solution. Alternative "static" ip is also not a solution. Anything with the word "static" in it is not a solution. I know about third party firmware (wrt or tomato) and I know WRT54GL can be flashed with this third party firware. But I'm not going to void my warranty. This will be my last option but not the solution that I seek. I would like to know how to reserve ip for specific mac address using DHCP for WRT54GL V1.1. If this version have no way to make such configuration, I would like to know if there is official firmware upgrade that address this. Thanks in advance!

    LDK-Anc wrote:
    Tonik - For the life of me, I cannot find DHCP Reservation on the WRT300N. I'm currently configuring one and it would be really useful if I could fine it. Maybe LinkSys calls it something else, but I don't really see anything resembling it. Help!
    Maybe these could help. (Images extracted from the User Guide)
    Setup tab: Basic Setup
    DHCP Reservation
    Message Edited by denman_v2 on 03-25-2008 05:11 PM

  • I had to buy a new laptop after my old one died, after authorising my new one nearly my whole library has disappeared. How do I get all my songs back?

    I had to buy a new laptop after my old one died, after authorizing my new one nearly my whole library has disappeared. How do I get all my songs back?

    Likely, because you are now using a different Apple ID and iTunes account. Return to using your old Apple ID and authorize only after you have de-authorized your old computer.
    You can de-authorize individual computers, but only by using those computers. The only other option is to "de-authorize all" from your iTunes account.
      1. Open iTunes on a computer
      2. From the Store menu, select "View my Account..."
      3. Sign in with your Apple ID and password.
      4. Under "Computer Authorizations" select "De-authorize All".
      5. Authorize each computer you still have, as you may require.
    You may only do this once per year.
    After you "de-authorize all" your authorized computers, re-authorize each one as required.
    If you have de-authorized all computers and need to do it again, but your year has not elapsed, then contact: Apple - Support - iTunes - Contact Us.
    For more information on authorization and de-authorization: iTunes Store- Authorize or deauthorize your Mac or PC.

  • Since lion upgrade iMac keeps looking for old server

    Hi,
    I have a NAS prior to Lion upgrade which was working perfectly. Now with the Lion upgrade the NAS (Sitecom) ther were some issues. I have reinstalled the NAs and had given it a new name. I can find the NAs now so thats not a problem.
    But almost every hour I get 2 warning that he can not find the "old NAS", it really start annoying me and I've looked everywhere and I don't even find any link (Finder) towards it so I don't know what to do to get rid of this message, receiving it every hour twice really start getting on my nerves.
    Sorry for th Dutch, but the message translates;
    A problem has occured with connecting to the server 'VanBeeckNAS'
    The server doesn't exist or is currently not available. Check the servername or the IP-address of the server, ...
    Any help is highly appreciated.
    Peter

    Same problem since lion. Not only can I not back up to the server it keeps looking for it several times on start up. Real annoying.

  • Looking for old functionality from ios6

    When using Safari in ios6, I recall when tapping the address bar, the cursor placed itself at the end of the URL.
    That used to be a very functional ability alongside showing the whole URL in the address bar instead of how ios7 only shows a general "site" address with no detail as to what folder or file or archive you're accessing within the site.
    I can understand shortening the address bar for aesthetics but also taking out the cursor-at-end selection when tapping on the address bar just makes things difficult to use. It's an either-or sort of affair, because both working at the same time reduce function. ios7 seems to be a very poorly designed operations system.
    So is there any way to put the cursor at the end of the URL selection upon tapping the Safari Address Bar instead of "select-all" occurring (and not even showing "all" that is selected)?
    Thanks

    WinnerEX wrote:
    Does your address bar in Safari for MacOS select everything when you click the address bar? Does it shorten the URL address after the visited website loads?
    How is making ios7 less intuitive by making it different from Mac or Windows supposed to be helpful?
    I don't expect Mac to Work like Windoes or iOS to work like either of them. Although there are overlapping features, there always have been and always will be differences. Not the least of which is the difference in a touch screen device and one intended to be used with a keyboard.
    Also ios7 Camera doesn't have a zoom feature on iPhone 4S, despite the feature being advertised.
    The zoom works fine on my iPhone 5S and on my iPhone 5 before that.
    Computers and smart phone operating systems are not "intuitive". They are learned. As Ralph noted, things change. We have to unlearn old habits and learn new ones.
    Submit your feedback directly to Apple using the appropriate link on the Feedback page:
    http://www.apple.com/feedback

  • Looking for old Nokia ringtones

    Hi, I'm looking for some old Nokia ringtones (ah, those days). The Nokia ringtones called Airy, Coconut, and Beach are some ringtones I'm currently looking. If any one can help me I'll be greatful.
    Nokia should release their previous ringtones for us, because it's so good. I like the Nokia tune play in harp instrument that can be found in Nokia 1600.

    Hi, Chiyawa. We appreciate your interest in our products. You can try visiting any Nokia store or authorized Nokia retailers for their availability in your area. Check your local support page at http://www.microsoft.com/en/mobile/support/locations/. All the best and welcome to our community. ;-)

  • I am having trouble connecting to my wireless internet. I keep getting message that my network configuration settings have changed. Ive been advised that i need to change settings to look for dynamic ip address ?

    I am having trouble connecting to my wireless internet and am getting the message that my network configuration settings have changed. I have reported it to my provider who advised that they think the Mac is looking for a fixed IP address and they use dynamic addresses. I have had the Mac for months and have not had this problem before. I would appreciate any help please on how to fix this ?

    Then I get a separate pop up that says: Secure Connection Failed. aus3.mozilla:443 uses an invalid security certificate.
    The certificate is only valid for the following names: securelogin.arubanetworks.com, www.securelogin.arubanetworks.com
    (Error code: ssl_error_cert_domain)
    This could be a problem with the server's configuration or it could be someone trying to impersonate the server.
    If you have connected to this server successfully in the past the error may be temporary and you can try again later.
    I have tried many many times!

  • IMovie 11 freezing looking for old (trashed) computer doing iphoto import?

    Odd problem with my new iMovie. When I try to run it and it goes through the update of files from iPhoto, it freezes and says that the network connection with an old desktop computer we used to have is broken. Then it just reappears and will never complete the iphoto transfer. I have changed iphoto libraries to a new one and that solved the problem, but we have a ton of movies in our iphoto library that I need in imovie. Does anyone know how to disassociate iphoto library from an old computer? In iphoto there are no issues with looking for the old computer, and I don't think we ever had them synced to begin with. Any help is appreciated.

    Hello,
    I have the same problem on my mid 2012 MBP retina 15 inch. For example, when i am importing from facetime in final cut, sometimes it records in 720HD @ 24fps, and sometimes in non-HD @ 17fps.
    Everything is up to date, i have tried recording from photobooth and quicktime, and the issue remains the same.

  • HT6170 help with changing password for old email address

    I changed my apple id to my new password over a year ago.  Trying to restore my iphone and its asking for the password for my old apple id (old email address) which I no longer have access to.  Tried the 'answer questions' to reset but it won't accept my valid birthdate.  How can I make this prompt for my old email address go away and make it ask for my new one (new apple id).  A similar issue is that iCloud keeps popping up asking for the password for my old email address as well.

    You can't link to your new account (you created a new iTunes account, you didn't update your existing account ?) until removed removed the activation lock to your old account - you can then link it to your new account in Settings > iCloud.
    If you can't get the password for your old account reset via http://iforgot.apple.com then try contacting Support in your country, after confirming your id and that it's your account they should be able to reset it for you.
    Contacting Apple about account security : http://support.apple.com/en-us/HT5699
    If your country isn't on that page then try this form and explain and see what they reply with : https://ssl.apple.com/emea/support/itunes/contact.html

Maybe you are looking for