Weblogic 6.1 and JVM 1.4 on Solaris
I know this combination is not officially supported, but I would like to be
able to try it in a test system for comparative purposes.
I saw a previous mail on this subject indicating it was possible (reproduced
below). I tried creating the Solaris equivalent of the file as
/usr/j2sdk1.4.0/jre/lib/security/login.config with the contents:
ServerLoginModule {
com.sun.security.auth.module.UnixLoginModule required debug=true;
This made no difference to the output (also reproduced below)
I have two questions:
- Have I done something wrong (file owner/permissions?) or is there
something else I need to do to make this work?
- Is there anywhere else I can place this file - on the CLASSPATH perhaps -
I tried this a bit but I didn't get anywhere.
Thanks,.
Roger Broadbent
Technical Consultant
Wilco International Ltd
From: "dominik" <[email protected]>
Sender: "dominik" <[email protected]>
Reply-To: "dominik" <[email protected]>
Subject: Re: Support for JDK 1.4 -> works on Suse 7.2 & 7.3
Newsgroups: weblogic.support.install
X-User-Info: 80.254.173.142
References: <[email protected]> <[email protected]>
NNTP-Posting-Host: 80.254.173.142
X-Original-NNTP-Posting-Host: 80.254.173.142
Message-ID: <[email protected]>
Date: 7 Apr 2002 03:19:19 -0800
X-Trace: newsgroups.bea.com 1018174759 80.254.173.142 (7 Apr 2002
03:19:19 -0800)
Organization: BEA SYSTEMS Inc
Lines: 42
XPident: Unknown
Hi
It works for me on Suse Linux 7.2 & 7.3 with JDK
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.0-b92)
Java HotSpot(TM) Client VM (build 1.4.0-b92, mixed mode)
This is my login configuration:
#/usr/lib/jdk1.4/jre/lib/security > cat login.config
ServerLoginModule {
com.sun.security.auth.module.UnixLoginModule required debug=true;
I had to pass the weblogic system password on the commandline
(with -Dweblogic.management.password=$WLS_PW).
The password in password.ini somehow didn't work ... (I was
prompted for the guest password, was able to boot the server but
had some weblogic.management.NoAccessRuntimeException later on.
Yeshwant <[email protected]> wrote:
>
Try the pdf document that I have attached. Please note that using 1.4
JVM
is currently not supported by BEA
let me know if it works.
Aamir Baig wrote:
Will weblogic 5.1, 6.0 or 6.1 work with jdk 1.4 ? has anyone tried
and
succeeded ?
Thanks in advance
Kind Regards,
Aamir Baig
Etilize, Inc.
Phone : 310-767-4001 x 205
Fax: 310-767-1548Output:
% startWebLogic_JVM1.4.sh
LD_LIBRARY_PATH=.:/usr/sybase/OCS-12_0/lib:/local/upm/bea/wlserver6.1/lib/so
laris:/local/upm/bea/wlserver6.1/lib/solaris/oci816_8
* To start WebLogic Server, use the password *
* assigned to the system user. The system *
* username and password must also be used to *
* access the WebLogic Server console from a web *
* browser. *
java.lang.SecurityException: Unable to locate a login configuration
at com.sun.security.auth.login.ConfigFile.<init>(ConfigFile.java:97)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native
Method)
at
sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAcces
sorImpl.java:39)
at
sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstruc
torAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
at java.lang.Class.newInstance0(Class.java:296)
at java.lang.Class.newInstance(Class.java:249)
at
javax.security.auth.login.Configuration$3.run(Configuration.java:221)
at java.security.AccessController.doPrivileged(Native Method)
at
javax.security.auth.login.Configuration.getConfiguration(Configuration.java:
215)
at
javax.security.auth.login.LoginContext$1.run(LoginContext.java:170)
at java.security.AccessController.doPrivileged(Native Method)
at
javax.security.auth.login.LoginContext.init(LoginContext.java:167)
at
javax.security.auth.login.LoginContext.<init>(LoginContext.java:393)
at
weblogic.security.internal.ServerAuthenticate.main(ServerAuthenticate.java:8
1)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:195)
at weblogic.Server.main(Server.java:35)
Caused by: java.io.IOException: Unable to locate a login configuration
at com.sun.security.auth.login.ConfigFile.init(ConfigFile.java:206)
at com.sun.security.auth.login.ConfigFile.<init>(ConfigFile.java:95)
... 16 more
Hi Janne,
You may want to check this link:
http://e-docs.bea.com/wls/docs70/compatibility/compatibility.html
"janne" <[email protected]> wrote in message
news:[email protected]..
Are WebLogic 6.1 and 7.0 EJBs interoperable? Can a client EJB on 6.1
call another EJB on 7.0 and vice versa?
Weblogic 5.1 and 6.0 were not interoperable. Interoperability was
achieved with versions 5.1 sp12 and 6.1 sp 3.
http://e-docs.bea.com/wls/docs61/interop/interop.html
Regards,
Slava Imeshev
Similar Messages
-
WebLogic 6.1 and DB2 setup on Solaris 8
Hi,
I was wondering if anyone knows how? and if it is possible to setup WebLogic 6.1
and DB2 to work on Solaris 8? and if they know any helpfull links for me to read
up on how to set everything up.
ThanksOk.
http://search.beasys.com/weblogic/gonews/
S.
"S Tomb" <[email protected]> wrote in message
news:3b9d3f97$[email protected]..
>
The link you included does not work, is there another URL
that does work? Thanks
S Tomb
"Slava Imeshev" <[email protected]> wrote:
You could go to our newsgroup search engine,
(http://search.beasys.com/weblogic/gonews/)
select jdbc newsgroup, enter "DB2" keyword
and press "Search" button.
Regards,
Slava Imeshev
"S Tomb" <[email protected]> wrote in message
news:3b996903$[email protected]..
Hi,
I was wondering if anyone knows how? and if it is possible to setupWebLogic 6.1
and DB2 to work on Solaris 8? and if they know any helpfull links forme
to read
up on how to set everything up.
Thanks -
Help Migrating Java app to Weblogic 9.2 and Workshop -- startup errors
I need a little help getting my application up and running in Workshop. I recently migrated to Weblogic 9.2. Before I downloaded Workshop, I installed Weblogic 9.3 and have successfully setup and deployed the app on my PC outside of Workshop. The application is packaged as an EAR – I have extracted the war file and other contents from the ear onto my PC in order to do the deployment.
In Workshop, I have setup the application as a Java project, have pointed to the source code and required libraries, and have been able to successfully compile the application. I have setup a ‘run dialog’ with similar parameters as in the config.xml and other configuration files.
The problem I am currently having is when I start the application in Workshop, it is asking for a username. I have tried to enter the username that I setup with the original deployment (before I installed Workshop) and it does not accept it – it always shuts down.
How can I either make it not require a username, or else use (point to) the same startup configuration as my original deployment, from before installing Workshop?On Tue, 5 Jun 2007 05:30:09 -0700, Paul Harvey <> wrote:
I've been unable to find clear, authoritative information on this...
I have an app which requires Java 1.4.x. Should I be able to deploy
it on WL 9.2, or does 9.2 only support apps written in 1.5?WL9.2 has a Java 1.5 JVM. That should run Java 1.4 programs just fine.
Tim Slattery
MS MVP(DTS)
[email protected]
http://members.cox.net/slatteryt -
Hi,
I am using Weblogic 6.1 with Oracle 8.1.7. I configured a TXDataSource as I wanted
to use Container Managed Transaction through a Session Bean.
Connection Pool Settings: -------------------------
Name - myXAPool URL - jdbc:oracle:thin:@myServer:1521:myDb DriverClassname - oracle.jdbc.xa.client.OracleXADataSource
TXDataSource Settings : -----------------------
Name - myXADS
JNDIName - myXADS
PoolName - myXAPool
Everything works fine but once in a while I get the following exception:
java.sql.SQLException: XA error: XAER_RMERR : A resource manager error has occured
in the transaction branch start() failed on resource 'myXAPool' Unexpected error
during start for XAResource 'myXAPool': null
The connection pool size is 30 and the number connections high reached was 5,
which means there are enough connections in the pool available at all time.
It would be really great if you can help me out.
Thanks in Advance, Sudhir.
Hi Slava,
Sorry about that Oracle instance I am using is 8.1.7.
For the XA Driver I am using the one that comes with Weblogic in weblogic.jar.
And my Weblogic version 6.1 Sp3.
Thanks,
Sudhir.
"Slava Imeshev" <[email protected]> wrote:
Hi Sudhir,
Are you using an instance of 8.1.6 or 8.1.7? In the message header you
say
8.1.6.
Regards,
Slava Imeshev
"Sudhir Babu" <[email protected]> wrote in message
news:[email protected]..
Hi,
I am using Weblogic 6.1 with Oracle 8.1.7. I configured a TXDataSourceas
I wanted
to use Container Managed Transaction through a Session Bean.
Connection Pool Settings: -------------------------
Name - myXAPool URL - jdbc:oracle:thin:@myServer:1521:myDb
DriverClassname - oracle.jdbc.xa.client.OracleXADataSource
TXDataSource Settings : -----------------------
Name - myXADS
JNDIName - myXADS
PoolName - myXAPool
Everything works fine but once in a while I get the following exception:
java.sql.SQLException: XA error: XAER_RMERR : A resource manager errorhas
occured
in the transaction branch start() failed on resource 'myXAPool' Unexpectederror
during start for XAResource 'myXAPool': null
The connection pool size is 30 and the number connections high reachedwas
5,
which means there are enough connections in the pool available at alltime.
It would be really great if you can help me out.
Thanks in Advance, Sudhir. -
XA error: using Weblogic 6.1 and Oracle 8.1.6
Hi,
I am using Weblogic 6.1 with Oracle 8.1.7. I configured a TXDataSource as I wanted
to use Container Managed Transaction through a Session Bean.
Connection Pool Settings: -------------------------
Name - myXAPool URL - jdbc:oracle:thin:@myServer:1521:myDb
DriverClassname - oracle.jdbc.xa.client.OracleXADataSource
TXDataSource Settings : -----------------------
Name - myXADS
JNDIName - myXADS
PoolName - myXAPool
Everything works fine but once in a while I get the following exception:
java.sql.SQLException: XA error: XAER_RMERR : A resource manager error has occured
in the transaction branch start() failed on resource 'myXAPool' Unexpected error
during start for XAResource 'myXAPool': null
The connection pool size is 30 and the number connections high reached was 5,
which means there are enough connections in the pool available at all time.
It would be really great if you can help me out.
Thanks in Advance, Sudhir.Hi Slava,
Sorry about that Oracle instance I am using is 8.1.7.
For the XA Driver I am using the one that comes with Weblogic in weblogic.jar.
And my Weblogic version 6.1 Sp3.
Thanks,
Sudhir.
"Slava Imeshev" <[email protected]> wrote:
Hi Sudhir,
Are you using an instance of 8.1.6 or 8.1.7? In the message header you
say
8.1.6.
Regards,
Slava Imeshev
"Sudhir Babu" <[email protected]> wrote in message
news:[email protected]..
Hi,
I am using Weblogic 6.1 with Oracle 8.1.7. I configured a TXDataSourceas
I wanted
to use Container Managed Transaction through a Session Bean.
Connection Pool Settings: -------------------------
Name - myXAPool URL - jdbc:oracle:thin:@myServer:1521:myDb
DriverClassname - oracle.jdbc.xa.client.OracleXADataSource
TXDataSource Settings : -----------------------
Name - myXADS
JNDIName - myXADS
PoolName - myXAPool
Everything works fine but once in a while I get the following exception:
java.sql.SQLException: XA error: XAER_RMERR : A resource manager errorhas
occured
in the transaction branch start() failed on resource 'myXAPool' Unexpectederror
during start for XAResource 'myXAPool': null
The connection pool size is 30 and the number connections high reachedwas
5,
which means there are enough connections in the pool available at alltime.
It would be really great if you can help me out.
Thanks in Advance, Sudhir. -
Hi,
i am trying to configure JDBC with weblogic. Can any one tell me which deriver needs to be selected for weblogic 10.3 and Oracle DB 11g both on MS2008 separate server.
if i use BEA oracle Driver (Type 4) version 9.0.1, 9.2.0,10,11, i find error (see snap:2)
Connection test failed.
[BEA][Oracle JDBC Driver]Error establishing socket. Unknown host: hdyhtc137540d<br/>weblogic.jdbc.base.BaseExceptions.createException(Unknown Source)<br/>weblogic.jdbc.base.BaseExceptions.getException(Unknown Source)<br/>weblogic.jdbc.oracle.OracleImplConnection.makeConnectionHelper(Unknown Source)<br/>weblogic.jdbc.oracle.OracleImplConnection.makeConnection(Unknown Source)<br/>weblogic.jdbc.oracle.OracleImplConnection.connectAndAuthenticate(Unknown Source)<br/>weblogic.jdbc.oracle.OracleImplConnection.open(Unknown Source)<br/>weblogic.jdbc.base.BaseConnection.connect(Unknown Source)<br/>weblogic.jdbc.base.BaseConnection.setupImplConnection(Unknown Source)<br/>weblogic.jdbc.base.BaseConnection.open(Unknown Source)<br/>weblogic.jdbc.base.BaseDriver.connect(Unknown Source)<br/>com.bea.console.utils.jdbc.JDBCUtils.testConnection(JDBCUtils.java:505)<br/>c om.bea.console.actions.jdbc.datasources.createjdbcdatasource.CreateJDBCDataSource.testConn ectionConfiguration(CreateJDBCDataSource.java:369)<br/>sun.reflect.GeneratedMethodAccessor 826.invoke(Unknown Source)<br/>sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl. java:25)<br/>java.lang.reflect.Method.invoke(Method.java:597)<br/>org.apache.beehive.netui .pageflow.FlowController.invokeActionMethod(FlowController.java:870)<br/>org.apache.beehiv e.netui.pageflow.FlowController.getActionMethodForward(FlowController.java:809)<br/>org.ap ache.beehive.netui.pageflow.FlowController.internalExecute(FlowController.java:478)<br/>or g.apache.beehive.netui.pageflow.PageFlowController.internalExecute(PageFlowController.java :306)<br/>org.apache.beehive.netui.pageflow.FlowController.execute(FlowController.java:336 )<br/>...
and
when i use oracle's driver (thin) version 9.0.1, 9.2.0,10,11, i find error
Connection test failed.
Io exception: The Network Adapter could not establish the connection<br/>oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:10 1)<br/>oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:112)<br/>oracle .jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:173)<br/>oracle.jdbc.drive r.DatabaseError.throwSqlException(DatabaseError.java:229)<br/>oracle.jdbc.driver.DatabaseE rror.throwSqlException(DatabaseError.java:458)<br/>oracle.jdbc.driver.T4CConnection.logon( T4CConnection.java:411)<br/>oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnectio n.java:490)<br/>oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:202)<br/>oracle .jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:33)<br/>oracle.jdbc. driver.OracleDriver.connect(OracleDriver.java:474)<br/>com.bea.console.utils.jdbc.JDBCUtil s.testConnection(JDBCUtils.java:505)<br/>com.bea.console.actions.jdbc.datasources.createjd bcdatasource.CreateJDBCDataSource.testConnectionConfiguration(CreateJDBCDataSource.java:36 9)<br/>sun.reflect.GeneratedMethodAccessor826.invoke(Unknown Source)<br/>sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl. java:25)<br/>java.lang.reflect.Method.invoke(Method.java:597)<br/>org.apache.beehive.netui .pageflow.FlowController.invokeActionMethod(FlowController.java:870)<br/>org.apache.beehiv e.netui.pageflow.FlowController.getActionMethodForward(FlowController.java:809)<br/>org.ap ache.beehive.netui.pageflow.FlowController.internalExecute(FlowController.java:478)<br/>or g.apache.beehive.netui.pageflow.PageFlowController.internalExecute(PageFlowController.java :306)<br/>org.apache.beehive.netui.pageflow.FlowController.execute(FlowController.java:336 )<br/>...i am finding this error when i click on Test Configuration button to test the connection wth oracle DB
-
CF8 on Weblogic 10.0 and Apache
I am trying to configure CF8 as an EAR file on Weblogic 10.0
and configuring it with Apache webserver. The settings for Weblogic
are made as mentioned in the configuration document and CF8 is
working fine on Weblogic.
Now for Apache connectivity, a connector is configured for
Weblogic which handles *.cfm files requests as well.
- The CFM files are kept in webserver and when I try to open
a cfm file, the proxy is getting invoked but since Weblogic doesn't
find the file URI it returns 404.
- Please let me know how can the CFM files kept on Webserver
be rendered using CF8 deployed on Weblogic
Or there is a need for these files to be kept on the Weblogic
Appserver onlysam_cf09 wrote:
> Can the CFM files be a part of any WAR file deployed on
Weblgic and Cold
> fusion will take care of rendering them
Sure. If you want to put a file example.cfm in a WAR file,
put it in the
root of the WAR. Your folder structure will look something
like:
WAR/
WAR/example.cfm
WAR/WEB-INF
WAR/WEB-INF/web.xml
WAR/WEB-INF/*
WAR/WEB-INF/cfusion
WAR/WEB-INF/cfusion/lib/
etc.
Then if you have a context root "/test" in your
Application.xml you can
reach your template through the URL
http://server/test/example.cfm
The best way to get a WAR (or EAR) file for deployment is to
run the
installer. It has the option to generate a WAR or EAR for
you. Use that,
then later unjar it to see how it looks internally.
Jochem
Jochem van Dieten
Adobe Community Expert for ColdFusion -
WebLogic 8.1SP4 and IIS
Hi,
I want to configure weblogic with IIS and have found enough articles on how to proxy IIS to point to a single instance or a clustered environment but not on how to proxy IIS to multiple WebLogic servers
I have the application running on
http://<weblogic-server>:7201/elms
http://<weblogic-server>:7301/elms
http://<weblogic-server>:7401/elms
and I want to be able to access these via the IIS through these URLs:
http://<IIS_Server>/elms
http://<IIS_Server>/elms_sit
http://<IIS_Server>/elms_uat
Is this configuration possible? Any help would be highly appreciated.
Thanks
SandeepSince you are attempting to proxy by path you need to configure the iisforward.dll as stated in step #3 here:
http://e-docs.bea.com/wls/docs81/plugins/isapi.html#100382 -
Weblogic Bridge "failed and will reconnect later"
The enterprise architecture is as follows:
1 Physical machine where I have 2 VMs on this machine, and each VM I have 1 domain, 1 Cluster and 1 managed server, and the second VM I have the replicated what I have in first VM.
In first domain I have the OSB, in the second domain I have SOA.
What I need ? Send information of queues (topics) of First Domain (OSB) to second domain(SOA).
At first the only thing I did was:
In the first domain I created OSB JMS Server, JMS Module, Connection Factory and Queue Topic.
In the second domain SOA I replied the same thing but with different names.
Then I created the bridge with configuration default between the first domain and the second domain, the bridge and when active it generates me a message Weblogic Bridge "failed and will reconnect later"
I did a test on my local machine windows where I created two domains, and the same procedures you did above, but the point was funcinou been activated now for the enterprise environment I'm not managing to make it work, you could tell me what is wrong . in both cases restarted the weblogic server as the machine itself the question that ran on my machine and machine company no.
If you can give me a light thank.This is a bug (6973877, derby only) which has been fixed in 4.5 build14 and 4.4u2p1. Thanks for reporting. The problem is the missing "FOR BIT DATA" in LOG_RECORD column in derby table definition MQTMLRJMSBG41 in broker default.properties file
- LOG_RECORD VARCHAR(2048) NOT NULL,\
+ LOG_RECORD VARCHAR(2048) FOR BIT DATA NOT NULL,\ -
Preview Release of WebLogic Portal 9 and Workshop 9
I would like to get my hands on a developer preview release of WebLogic Portal 9 and Workshop 9. I can't seem to find it online so I'm hoping someone can point me in the right direction. We're currently evaluating portal products and I would hate to decide against BEA based on the lack of availability of the forthcoming version.
Anybody know where a developer release of either of these two products can be found?The Technology Preview for WLP 9.x and WLW 9.x will be available in early December. Please contact your BEA account team to let them know that you are interested.
At present the plan is to have a GroupSpace community site for use by all customers participating in the Technology Preview. A BEA technical field staff member (SE, PS, etc.) assigned to your account will use this site to send you an invitation, and when you join you will have access to the installation. Questions, discussions, etc. for the Technology Preview will all go through the GroupSpace site. If you don't know who your BEA technical account member(s) are, you should find out as they will be the key to obtaining the Technology Preview.
If you can't wait for the Technology Preview, please ask your BEA acount team to contact myself or others in Product Management. We'll be happy to go over the product features, show you demos from current builds, etc.
Thanks,
Skip Sauls
Senior Product Manager, WebLogic Portal -
Weblogic 8.1 and Novell LDAP SSL
Hi Everyone !
I'm having problems enabling SSL between Weblogic 8.1 and Novell LDAP. I have
the non-SSL working. All the BEA documentation I've found indicates that the SSL
Enabled checkbox needs to be checked and that's all. This can't be all because
I get the following errors.
Does anyone know how to solve this ?
Thanks,
Eddie
####<Oct 1, 2003 12:06:42 PM EDT> <Notice> <Security> <6X19DYSZH1ZV> <mytest>
<ExecuteThread: '14' for queue: 'weblogic.kernel.Default'> <<WLS Kernel>> <> <BEA-090169>
<Loading trusted certificates from the jks keystore file C:\bea8.1\WEBLOG~1\server\lib\DemoTrust.jks.>
####<Oct 1, 2003 12:06:42 PM EDT> <Notice> <Security> <6X19DYSZH1ZV> <mytest>
<ExecuteThread: '14' for queue: 'weblogic.kernel.Default'> <<WLS Kernel>> <> <BEA-090169>
<Loading trusted certificates from the jks keystore file C:\bea8.1\JDK141~1\jre\lib\security\cacerts.>
####<Oct 1, 2003 12:06:42 PM EDT> <Warning> <Security> <6X19DYSZH1ZV> <mytest>
<ExecuteThread: '14' for queue: 'weblogic.kernel.Default'> <<WLS Kernel>> <> <BEA-090476>
<Invalid/unknown SSL header was received from peer NASTEA02 - 10.4.5.104 during
SSL handshake.>You need to configure the server SSL to trust the identity certificate it receives
from nastea02.bankofny.com If you want to use the default configuration you could
simply import the CA certificate that issued that identity certificate to the
DemoTrust.jks keystore.
Also, look at Using Host Name Verification here: http://edocs.bea.com/wls/docs81/secmanage/ssl.html#1187786
because this might be another reason why the certificate is rejected.
Pavel.
"Eddie Baue" <[email protected]> wrote:
>
Hi Everyone !
Please ignore the exceptions from my previous posting. I'm getting
a new exception,
which I've list below.
Thanks,
Eddie
####<Oct 1, 2003 2:47:20 PM EDT> <Warning> <Security> <6X19DYSZH1ZV>
<mytest>
<ExecuteThread: '14' for queue: 'weblogic.kernel.Default'> <<WLS Kernel>>
<> <BEA-090477>
<Certificate chain received from nastea02.bankofny.com - 10.4.5.104 was
not trusted
causing SSL handshake failure.>
"Eddie Baue" <[email protected]> wrote:
Hi Everyone !
I'm having problems enabling SSL between Weblogic 8.1 and NovellLDAP.
I have
the non-SSL working. All the BEA documentation I've found indicatesthat
the SSL
Enabled checkbox needs to be checked and that's all. This can't beall
because
I get the following errors.
Does anyone know how to solve this ?
Thanks,
Eddie
####<Oct 1, 2003 12:06:42 PM EDT> <Notice> <Security> <6X19DYSZH1ZV>
<mytest>
<ExecuteThread: '14' for queue: 'weblogic.kernel.Default'> <<WLS Kernel>>
<> <BEA-090169>
<Loading trusted certificates from the jks keystore file C:\bea8.1\WEBLOG~1\server\lib\DemoTrust.jks.>
####<Oct 1, 2003 12:06:42 PM EDT> <Notice> <Security> <6X19DYSZH1ZV>
<mytest>
<ExecuteThread: '14' for queue: 'weblogic.kernel.Default'> <<WLS Kernel>>
<> <BEA-090169>
<Loading trusted certificates from the jks keystore file C:\bea8.1\JDK141~1\jre\lib\security\cacerts.>
####<Oct 1, 2003 12:06:42 PM EDT> <Warning> <Security> <6X19DYSZH1ZV>
<mytest>
<ExecuteThread: '14' for queue: 'weblogic.kernel.Default'> <<WLS Kernel>>
<> <BEA-090476>
<Invalid/unknown SSL header was received from peer NASTEA02 - 10.4.5.104
during
SSL handshake.> -
How to run weblogic 8.1 and weblogic 9.2 simultaneously
I have data service platform installed on Weblogic 8.1 platform and Aqualogic service bus installed with Weblogic 9.2.And I want to start both the servers at the same time.
I have configured Weblogic server 8.1 domain to listen on 7771 port while weblogic 9.2 server domain is listening on 7001.However when I start both the server then one server starts and others server fail to start and in prompt following error message is displayed :
ERROR:Transport error 202:bind failed:Address already in use["transport.c",L41]
ERROR:JDWD Transport dt_socket failed to inintialized TRANSPORT_INIT<510>["debugInit.c",L500]
JDWD exit error JVMTI_ERROR_INTERNAL<113>:No transport inintialized
Message was edited by:
mihirkhanwalkarCan you show us the full error message? I don't know of anything in WLS that uses port 202 by default. It's a privileged port as well which makes it even more unusual.
-- Rob
WLS Blog http://dev2dev.bea.com/blog/rwoollen/ -
Keep weblogic admin server and managed server running after exiting PUTTY
How do i keep my managed servers and admin servers running on SOLARIS (unix) boxes even after exiting putty and starting them? Do i need to create like a cron job or something?
*(after running nohup ./startWebLogic.sh i get Sending output to nohup.out and hangs there)*
out put from nohup.out =>
JAVA Memory arguments: -Xms256m -Xmx512m -XX:MaxPermSize=256m
WLS Start Mode=Production
CLASSPATH=/usr/Oracle/Middleware/patch_wls1034/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/usr/Oracle/Middleware/patch_ocp360/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/d/ct0/home/shahs06/JAVA/jdk1.6.0_25/lib/tools.jar:/usr/Oracle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/usr/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/usr/Oracle/Middleware/modules/features/weblogic.server.modules_10.3.4.0.jar:/usr/Oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/usr/Oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/usr/Oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/usr/Oracle/Middleware/wlserver_10.3/common/derby/lib/derbyclient.jar:/usr/Oracle/Middleware/wlserver_10.3/server/lib/xqrl.jar
PATH=/usr/Oracle/Middleware/wlserver_10.3/server/bin:/usr/Oracle/Middleware/modules/org.apache.ant_1.7.1/bin:/d/ct0/home/shahs06/JAVA/jdk1.6.0_25/jre/bin:/d/ct0/home/shahs06/JAVA/jdk1.6.0_25/bin:/usr/sbin:/usr/bin:/usr/local/bin:/d/ct0/home/shahs06/JAVA/jdk1.6.0_25/bin
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://hostname:port/console *
starting weblogic with Java version:
java version "1.6.0_25"
Java(TM) SE Runtime Environment (build 1.6.0_25-b06)
Java HotSpot(TM) 64-Bit Server VM (build 20.0-b11, mixed mode)
Starting WLS with line:
/d/ct0/home/shahs06/JAVA/jdk1.6.0_25/bin/java -server -d64 -Xms256m -Xmx512m -XX:MaxPermSize=256m -Dweblogic.Name=AdminServer -Djava.security.policy=/usr/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.policy -Dweblogic.ProductionModeEnabled=true -da -Dplatform.home=/usr/Oracle/Middleware/wlserver_10.3 -Dwls.home=/usr/Oracle/Middleware/wlserver_10.3/server -Dweblogic.home=/usr/Oracle/Middleware/wlserver_10.3/server -Dweblogic.management.discover=true -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=false -Dweblogic.ext.dirs=/usr/Oracle/Middleware/patch_wls1034/profiles/default/sysext_manifest_classpath:/usr/Oracle/Middleware/patch_ocp360/profiles/default/sysext_manifest_classpath weblogic.Server
<9-May-2011 1:33:56 o'clock PM PDT> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<9-May-2011 1:33:57 o'clock PM PDT> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<9-May-2011 1:33:59 o'clock PM PDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) 64-Bit Server VM Version 20.0-b11 from Sun Microsystems Inc.>
<9-May-2011 1:34:04 o'clock PM PDT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.4.0 Fri Dec 17 20:47:33 PST 2010 1384255 >
<9-May-2011 1:34:12 o'clock PM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<9-May-2011 1:34:12 o'clock PM PDT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<9-May-2011 1:34:12 o'clock PM PDT> <Notice> <Log Management> <BEA-170019> <The server log file /usr/Oracle/Middleware/user_projects/domains/base_domain/servers/AdminServer/logs/AdminServer.log is opened. All server side log events will be written to this file.>
<9-May-2011 1:34:27 o'clock PM PDT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<9-May-2011 1:34:45 o'clock PM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<9-May-2011 1:34:45 o'clock PM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
9-May-2011 1:34:58 PM com.sun.faces.config.ConfigureListener contextInitialized
INFO: Initializing Sun's JavaServer Faces implementation (1.2_03-b04-FCS) for context '/console'
9-May-2011 1:34:58 PM com.sun.faces.config.ConfigureListener contextInitialized
INFO: Completed initializing Sun's JavaServer Faces implementation (1.2_03-b04-FCS) for context '/console'
<9-May-2011 1:35:04 o'clock PM PDT> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<9-May-2011 1:35:04 o'clock PM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<9-May-2011 1:35:04 o'clock PM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<9-May-2011 1:35:06 o'clock PM PDT> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias DemoIdentity from the jks keystore file /usr/Oracle/Middleware/wlserver_10.3/server/lib/DemoIdentity.jks.>
<9-May-2011 1:35:06 o'clock PM PDT> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file /usr/Oracle/Middleware/wlserver_10.3/server/lib/DemoTrust.jks.>
<9-May-2011 1:35:06 o'clock PM PDT> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file /d/ct0/home/shahs06/JAVA/jdk1.6.0_25/jre/lib/security/cacerts.>
<9-May-2011 1:35:06 o'clock PM PDT> <Alert> <Security> <BEA-090152> <Demo trusted CA certificate is being used in production mode: [
Version: V3
Subject: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: SunPKCS11-Solaris RSA public key, 512 bits (id 4371458208, session object)
modulus: 9550192877869244258838480703390456015046425375252278279190673063544122510925482179963329236052146047356415957587628011282484772458983977898996276815440753
public exponent: 65537
Validity: [From: Thu Mar 21 12:12:27 PST 2002,
To: Tue Mar 22 13:12:27 PDT 2022]
Issuer: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
SerialNumber: [ 33f10648 fcde0deb 4199921f d64537f4]
Certificate Extensions: 1
[1]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
Key_CertSign
] -
Performance of Weblogic 4.03 and Visual Age 2.0
Hello,
I am experiencing severe performance problems when running Weblogic 4.03 and
Visual Age 2.0. The server runs extremely slowly in this environment,
however, the 3.13 version did not suffer from this. Has anyone else noticed
this? Is there anything I can do about it?
-AndrewAndrew Sammons wrote:
I am experiencing severe performance problems when running Weblogic
4.03 and Visual Age 2.0. The server runs extremely slowly in this
environment, however, the 3.13 version did not suffer from this.
Has anyone else noticed this? Is there anything I can do about it?You can set the following undocumented property in weblogic.properties:
weblogic.system.gc.intervalSecs=5
There's some kind of bad interaction between Visual Age and WebLogic's
garbage collection control. Basically, there's a garbage collection
task that by default runs once a second, and in the Visual Age VM,
something it's doing takes more than a second.
The problem only seems to exist in WebLogic 4.0.3. It doesn't happen in
4.5.x. Also, according to one report I've had, you may need to set the
property value to more than 5 on slower machines.
Note that this property is unsupported, and is not guaranteed to even
exist in any other version of WebLogic.
-- Jim
Jim Edwards-Hewitt http://weblogic.beasys.com [email protected] -
Weblogic 4.5 and Visual Cafe 3.1
Hi,
I am having a problem integrating Visual Cafe with Weblogic.
Specifically, it involves getting the Weblogic classpath modified to support
setting up a connection pool to an Informix database. If I start the
Weblogic server manually, I can set the server classpath appropriately to
find the Informix JDBC driver and my pool is setup properly.
However with VC, it starts the Weblogic server from the IDE and I have
not been able to get the addition classpath entries to find the Informix
driver. Is there a way to add additional classpath entries so that when VC
starts Weblogic it will find my JDBC driver? Or do I have to start the
Weblogic server seperately and setup remote debugging manually?
Thanks
CarlYes, I am using the symantec debug VM. This is the batch file I use to start WL.
echo %CLASSPATH%
set
CLASSPATH=.;c:\VisualCafe\JAVA\LIB;c:\VisualCafe\JAVA\LIB\SYMCLASS.ZIP;c:\VisualCafe\JAVA\LIB\CLASSES.ZIP;c:\VisualCafe\bin\components\sfc.jar;c:\weblogic\license;%CLASSPATH%
set PATH=c:\winnt\system32;c:\winnt;c:\VisualCafe\Java\bin;c:\weblogic\bin
set
JAVACLASSPATH=%CLASSPATH%;.\classes\boot;.\eval\cloudscape\lib\cloudscape.jar
set
WEBLOGICCLASSPATH=.\classes;.\license;.\lib\weblogicaux.jar;c:\code\VisualCafe\Version1
rem java -ms32m -mx32m -classpath %JAVACLASSPATH%
-Dweblogic.class.path=%WEBLOGICCLASSPATH% -Djava.security.manager
-Djava.security.policy==weblogic.policy weblogic.Server
c:\VisualCafe\java\bin\debugvm -ms32m -mx32m -classpath %JAVACLASSPATH%
-Dweblogic.class.path=%WEBLOGICCLASSPATH% -Djava.security.manager
-Djava.security.policy==weblogic.policy weblogic.Server
If you don'y use the symantec debug VM, it stands to reason that the debug
environment will not see your process in the VM. I can't help you with why your
WL crashes when you connect using the debug VM. Perhaps you could post some more
information?
-- Jay
Tamilselvan Ramasamy wrote:
Hey,
help please
You said that you can attach from VC 3.1 to weblogic server 4.5.1 right. How
did you start the server ? Is it using the symantic debugvm.exe and symantic
settings? If I start the server with javasoft java.exe then VC is not seeing
the vm at all. And I tried starting weblogic server using symantic
debugvm.exe, as soon as a client trying to connect then the server crashes.
Please post the some instruction how did you do that?
Thanks
/selvan
Jay Baker <[email protected]> wrote in message
news:[email protected]...
The latter has been successful with me. I start the WL server manually viaa
command prompt and then 'attach to process'.
-- Jay
Carl Phillips wrote:
Hi,
I am having a problem integrating Visual Cafe with Weblogic.
Specifically, it involves getting the Weblogic classpath modified to
support
setting up a connection pool to an Informix database. If I start the
Weblogic server manually, I can set the server classpath appropriatelyto
find the Informix JDBC driver and my pool is setup properly.
However with VC, it starts the Weblogic server from the IDE and Ihave
not been able to get the addition classpath entries to find the Informix
driver. Is there a way to add additional classpath entries so that whenVC
starts Weblogic it will find my JDBC driver? Or do I have to start the
Weblogic server seperately and setup remote debugging manually?
Thanks
Carl
Maybe you are looking for
-
Attachments using good software
Attachments: I have the software good on my iPad to be able to view my work email on my iPad. The problem is with attachments, when I forward those, using good from my iPad, they don't 'get forwarded. In the forwarded email, the icon that seems to
-
Can 1 iPrint manager manage printers across subnets
Hello, I built a new server SLES 11 SP3/OES 11 SP2 and I have iPrint installed on this server. I have 3 elementary schools that each have their...
-
Installed Lion and couldn't open any of my saved Appleworks Docs(.cwk)
I had just installed Lion and all of a sudden whenever I tried to open a document saved from Apple Works with the extention .cwk, I wouild get the message, "You can't open the application 6.app because Power PC application is no longer supported. Ju
-
GL to get updated with Moving average price
Hi Guru's when we do PGI, currently the cost of goods issue value is updated from Moving average price into a GL account, Now i have created a new GL account and also want this new GL to get updated with the Moving average Price. Where can i make the
-
Image File in CFGRID with Query
I have a flash CFGRID populated with data from a query. I want to add a column to the grid that is not part of the query. I want the column to hold a small image file of an x that when clicked, deletes that row from the grid as well as the database i