Weblogic 6.1 Apache 2.0 / 1.3 Windows NT

Hello,
Does anyone tried to get Apache 2.0 running under Windows NT with
Weblogic 6.1Sp1 together ?
Apache crashes on NT and i read BEA does not Support Apache under NT ?
Any idea.
Robert

Hello,
Please have a look on the following URL which is for Apache platform
support for WebLogic Server 6.1, 6.0 :
http://e-docs.bea.com/wls/platforms/index.html#apach
Hope this helps,
Regards
Apameh
Robert Eller wrote:
Hello,
Does anyone tried to get Apache 2.0 running under Windows NT with
Weblogic 6.1Sp1 together ?
Apache crashes on NT and i read BEA does not Support Apache under NT ?
Any idea.
Robert--
Developer Relations Engineer
BEA Support
Note : Please reply to the newsgroup. Don't reply to this mail alias.
This is used only for answering posts on WebLogic Newsgroups.

Similar Messages

Weblogic plugin for Apache 2.2

Where should I download the weblogic plugin for Apache 2.2?
I'm running WL 10.3 on windows xp.
Please provide the link .
Thanks,
sripos

Hi
On this link, click Accept license and go all the way to bottom and click on All Versions link named next to "Oracle WebLogic Server Web Server Plugins 1.1"
http://www.oracle.com/technetwork/middleware/weblogic/downloads/wls-main-097127.html
That click should open this below link. Accept the license and Download the zip file. Then follow the instructions.
http://www.oracle.com/technetwork/middleware/ias/downloads/wls-plugins-096117.html
Thanks
Ravi Jegga

Installing weblogic plugin in apache running on RedHat Linux WS4

I want to install weblogic plugin in apache running on redhat Linux WS4. I have read the documentation. In my local weblogic,under this directory C:\bea81SP4\weblogic81\server\lib\linux
I see the following three folders
a) i686
b) ia64
c) s390.
I dont know which folder to choose. Please advise.

Hi,
according to your processer you have to chose mod_ ..so file
if you got error with sp4 plug in file use the plug in file from the another version
plug in files are compatable
Regards,
Prasanna Yalam

Where can i download the weblogic modules for apache (source/precompiled)

I have wandered the wonderfull world of the BEA website for 2 full days now and still am not an inch closer to de download site for the weblogic module for apache. That is, i have apache and need to add the weblogic module to it.
Complications are Solaris 10 and apache 2.0.55. So the latest versions of OS and webserver. Is there a precompiled module available or can i get the sources somewhere?
I do have a working module for apache 2.0.53 if someone can confirm that this is supported for 55 that would be fine by me.

At times when the sources were available I tried to build it on a "new" platform (Solaris x86 32bit) and I can tell you: it's NOTHING that is obvious. Building OpenOffice or Mozilla may appear like an easy task. It took me months to get there and to be able to just build the 'build tools'.
On top, many of the sources are (historically) written in a Pascal dialect and are transferred to C with an own precompiler so there are three languages used (C, C++ and Pascal) - so it's a pretty hard (next to impossible) job to learn some algorithms from those sources.
See also here:
http://cjcollier.livejournal.com/177628.html
http://home.snafu.de/~dittmar/sapdbdev/
and just to get an idea of the modules and their structure:
http://home.snafu.de/~dittmar/sapdbdev/sapdbModules.txt
Markus

Oracle Weblogic Server 10.3.5's functionlaity in Windows 7 64bit

Hi Guys,
Oracle Weblogic Server 10.3.5 installs fine in Windows 7 64bit, I'm able to check its functionality in the Installed user.
But If i try to launch the shortcut from any other users, I'm getting an error saying that the application can only be launched as Administrator and its prompting for UAC Credentials. But even when I try to launch it in a Elevated account its asking UAC.
I want to know, since it is an Server application, Whether by default it'll work only in the installed user of the machine.
It will be nice if any of you can get me a Valid document explaining this??
Thanks in advance.

Hello,
Look the following documentation:
http://docs.oracle.com/cd/E23943_01/doc.1111/e14142/prepare.htm#BABBBEBD
Also:
http://docs.oracle.com/cd/E23943_01/doc.1111/e14142/prepare.htm#i1129175
If you want access for all users you must install the software as Administrator and chech the option All Users to get access to the shortcuts from other users.
Hope this helps you :)
Regards
Carlos

Settings for PHP5 With Apache 2 and SAPRFC in WIndows

Hi,
Can anyone give me the exact version of software that needed for the settings for PHP5 with Apache 2 and SAPRFC in Windows.Thank you

If it's just a test/dev environment you need you can try "<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn?rid=/library/uuid/e50bd86e-0a01-0010-53bd-857585234a6a">scripting in a Box</a>" it also lists the versions and pieces needed for the setup you are looking for.

Problems running Weblogic 6.1 Server on Pentium 4 with Windows XP

Hi everyone.
I've got a problem. I'm trying to run Weblogic 6.1 Server on Pentium 4 with Windows
XP as OS, and when I try to work with the console the system restarts and get
an error message in which I can read something like "big error on the system".
Does anybody know if there is any problem between WebLogic Server and Pentium
4 or Windows XP?
Thank you

We're you ever able to install WLS 6.1 sp4 in XP in a working fashion?
WLS 6.1 sp3 works just fine on XP.
Steve...
"Hiroaki Nakamura" <[email protected]> wrote:
>
I had a problem installing WebLogic6.1SP4 on Windows XP.
SP3 was OK. The problem seems to be in the installer.
When I ran the installer, I saw these weird behaviors:
- The default value of BEA Home was "\\bea" (should be "C:\bea").
- The dialog for inputting system password was skipped.
- After the installer "finished", some directories like
C:\bea\jdk131, C:\bea\wlserver6.1\bin were missing.
OTOH, "C:\BEA WebLogic E-Business Platform" was created.
- In the control panel, add/remove program section, the
entry for WebLogic6.1SP4 was not created.
The installer runs fine on Windows 2000. And I copied
the installed files to my Windows XP machine, and I ran
startWebLogic.cmd in myserver directory, it seems OK.

Apache Server Running on a Windows Server Machine

To my understanding, when Apache is started on a windows machine, it will initiate 2 httpd processes, one parent and one child.
The child will then spawn multiple threads to handle incoming requests from clients.
My question is why do I then see more than 2 httpd processes in Task Manager?
Initially, it is 2 as I would expect but evenually, I start seeing 3, 4, 5, 6, ...
Thanks,
-- d.

Hi db,
You post the question at Silverlight forum and I do not think this is a suitable forum for such Apache questions.
I would suggest you to get help directly from Apache, here you go:
http://httpd.apache.org/support.html
And I will move the question to Off-topic, thanks for your understanding.
--James
<THE CONTENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS OR IMPLIED>
Thanks
MSDN Community Support
Please remember to "Mark as Answer" the responses that resolved your issue. It is a common way to recognize those who have helped you, and makes it easier for other visitors to find the resolution later.

Weblogic 8.1 Apache Plug-In

Where can I find the plug-in for WLS 8.1/Apache 2.0/Windows 2003?

Hi Vishwas,
Thank you for the reply. I forgot to mention that Apache and WebLogic are on Solaris 9 platform.
Accesing a webapp hosted on WebLogic through Apache->plug-in->WebLogic return 500 internal server error, but other webapps hosted on the same WebLogic domain works properly. Looking at the Response Hdrs from WebLogic shows that WLS returns transfer-encoding=chunked. The other webapps which work properly has content-length set and transfer-encoding is not chunked.
So, the question is does Apache Plug-in for weblogic 8.1 SP5 read the chunked data properly?
Thanks,
Janani

WebLogic Portal with Apache Derby

Has anyone tried to use the Apache Derby database with WebLogic Portal?
Kunal Mittal

Hi Faisal,
I have gone through the two links. Thanks.
One of the link enables LDAP user and group access on Weblogic. Suppose we have an web application called DMS and a LDAP group called DMS, can we assume that after running your wlst code, the users in the DMS group in LDAP will be granted access to the web application DMS? When we have a hundred different groups, we will need to put a loop around your code to expose them to WLS. Is that the case? I do not think it will work though as the set* member functions will set the group for later get* member functions' call from that group. How does this work for more than one group?
WLP and WebCenter both are based on WLS. Can I assume that the contents in the two links are applicable for WLP and WebCenter?
When we create web applications, portlets and pages etc. on WLP and WebCenter, we will associate them with some LDAP groups. Is that how it works?
Please advise,
Thanks,
Regards,
Michael
Edited by: user2766888 on 13/05/2010 18:02
Edited by: user2766888 on 13/05/2010 18:08
Edited by: user2766888 on 13/05/2010 18:11

Can't install weblogic server sp5(apache bridge) on linux

Hi.
I can't install weblogic server service pack 5(weblogic for apache
bridge,mod_wl.so) on redhat linux 6.2,my apache server version is 1.3, and
it work without sp5,when I use new mod_wl.so overwrite old one, apache
server can't start.
Please help,
Thanks
Jason Shi([email protected])

What exact problems are you having? I'm using WLS 5.1 SP5 + apache
1.3.12 + mod_ssl just fine.
John Salvo
Jason wrote:
>
Hi.
I can't install weblogic server service pack 5(weblogic for apache
bridge,mod_wl.so) on redhat linux 6.2,my apache server version is 1.3, and
it work without sp5,when I use new mod_wl.so overwrite old one, apache
server can't start.
Please help,
Thanks
Jason Shi([email protected])

Using ssl on WebLogic, not on Apache

Hi Folks,
This is probably a really obvious question, though I can't seem to figure it.
Does anyone know if Apache plug-in supports SSL between the browser and WebLogic
? For example, can it then get a session id from the request, so it can keep
sticky sessions ?
Maybe it can work if session id's go into URL instead of cookie, or such.
thanks in advance!
John

Hi, I have the exact same setup and the exact same error message in the logs. It does not seem to mather if I use the module that offers 128bit encryption or the standard one.
Group/User permisions do not make any diffrence.
So me being the weird person I am tried libs that come with service pack 3. This solved the problem.
It seems that this service pack 5 has a little problem with this version of redhat and or with this version of apache...
I hope this works for you as well.

Weblogic Configuration with Apache 2.2

Hi ,
I am getting the below error configured weblogic 10.3.5 with apache 2.2
<HTML>
<HEAD>
<TITLE>Weblogic Bridge Message
</TITLE>
</HEAD>
<BODY>
<H2>Failure of server APACHE bridge:</H2><P>
<hr>Your content length exceeded INT_MAX<hr> </BODY>
</HTML>
Thanks,

http://middlewaremagic.com/weblogic/?p=7795 (see the load balancing section)

Weblogic 6.1/apache plug-in problem

I did test plugin with Apache/Solaris platform and it works well.
Unfortunatelly it fails with Apache/HP-UX 11.
Apache 1.3.26 doesn't even recognize it as valid module:
# ../bin/apachectl start
/usr/lib/pa20_64/dld.sl: '/opt/apache/libexec/mod_wl_ssl_raven.so' is
not a valid load module: Bad magic number
Syntax error on line 212 of /opt/apache/conf/httpd.conf:
Cannot load /opt/apache/libexec/mod_wl_ssl_raven.so into server:
Invalid argument
../bin/apachectl start: httpd could not be started
I'm wondering did someone make it working on HP-UX 11 yet?
Thanks,
--jacek

[email protected] (jacek) wrote in message news:<[email protected]>...
I did test plugin with Apache/Solaris platform and it works well.
Unfortunatelly it fails with Apache/HP-UX 11.
Apache 1.3.26 doesn't even recognize it as valid module:
# ../bin/apachectl start
/usr/lib/pa20_64/dld.sl: '/opt/apache/libexec/mod_wl_ssl_raven.so' is
not a valid load module: Bad magic numberWhen I looked at it twice it's kind of selfsexplantory. It just says
"I am 64 bit loader and I can't deal with this 32bit plugin".
My conclusion is that if you build 64 bit Apache don't expect it to
work with WebLogic plugins since all of them are 32 bit. Am I wrong?
Syntax error on line 212 of /opt/apache/conf/httpd.conf:
Cannot load /opt/apache/libexec/mod_wl_ssl_raven.so into server:
Invalid argument
../bin/apachectl start: httpd could not be started
I'm wondering did someone make it working on HP-UX 11 yet?
Thanks,
--jacek

Intermittent problem with weblogic plugin for Apache

Env: hpux11, wls 4.5.2 w/sp1, apache 1.3.12.1
I am using Apache as the proxy for servlets. Apache serves all static content html/gifs.
The servlet request is forwarded to weblogic, and the servlet forwards the request to a jsp which responds with html output. Using IE 5, sometimes the images and html show up properly, other times the html code/tags is displayed. Using Netscape, the page does not display at all when the error occurs, otherwise it displays fine.
The problem occurs when refreshing the same page.
The errant display is HTML code/tags like:
<AREA SHAPE="RECT" COORDS="4,4,82,86"
Here are the httpd.conf settings for the wls plugin.
<Files *.jsp
SetHandler weblogic-handler
</Files
<Files *.ssi
SetHandler weblogic-handler
</Files
<Location /servletDispatcher
SetHandler weblogic-handler
</Location
WebLogicHost 192.168.12.63
WebLogicPort 8173
MatchExpression *.jsp
Debug ON
DebugConfigInfo ON
HungServerRecoverSecs 300
CookieName mycookie
In the debug log for wls plugin, the following failure message is logged to /tmp/wlproxy.log:
"operation READ failed on fd 8: revents=0x000000c0"
It looks like a socket error on the plugin. Has anyone seen this error or know what causes it?
The log message (in /tmp/wlproxy.log) for the entire request follows:
========New Request: [GET /tangomain?bid=20654&rq=rates HTTP/1.1] =========
Thu Nov 9 13:59:11 2000 Init: availcookie=[sid=OgrzAW0CpixHnM5hf25UQv12qubTNcddw9FBmMGZ3PXY0IP1qQ3P0d1KcLRhMyb4LsJnXvhmqdw3|-839933
8697591569903/-1062728652/5/8173/8173/7002/7002/-1]
Thu Nov 9 13:59:11 2000 In cookie2Servers, const c is 'sid=OgrzAW0CpixHnM5hf25UQv12qubTNcddw9FBmMGZ3PXY0IP1qQ3P0d1KcLRhMyb4LsJnXvhm
qdw3|-8399338697591569903/-1062728652/5/8173/8173/7002/7002/-1'Thu Nov 9 13:59:11 2000 In parseJVMID...'-8399338697591569903/-10627
28652/5/8173/8173/7002/7002/-1'!!Thu Nov 9 13:59:11 2000 Init: Preferred[0] = 192.168.12.52:8173
Thu Nov 9 13:59:11 2000 Init: Preferred[1] = :0
Thu Nov 9 13:59:11 2000 The request string is '/tangomain?bid=20654&rq=rates'
Thu Nov 9 13:59:11 2000 After trimming path: '/tangomain?bid=20654&rq=rates'
Thu Nov 9 13:59:11 2000 trying connect to PRIMARY '192.168.12.63'/8173
Thu Nov 9 13:59:11 2000 Host 192.168.12.63/8173 not found in the server list
Thu Nov 9 13:59:11 2000 Adding header [Accept]=[application/msword, application/vnd.ms-excel, application/vnd.ms-powerpoint, image/
gif, image/x-xbitmap, image/jpeg, image/pjpeg, */*]
Thu Nov 9 13:59:11 2000 Adding header [Accept-Encoding]=[gzip, deflate]
Thu Nov 9 13:59:11 2000 Adding header [Accept-Language]=[en-us]
Thu Nov 9 13:59:11 2000 Adding header [Connection]=[Keep-Alive]
Thu Nov 9 13:59:11 2000 Adding header [Cookie]=[sid=OgrzAW0CpixHnM5hf25UQv12qubTNcddw9FBmMGZ3PXY0IP1qQ3P0d1KcLRhMyb4LsJnXvhmqdw3|-8
399338697591569903/-1062728652/5/8173/8173/7002/7002/-1]
Thu Nov 9 13:59:11 2000 Adding header [Host]=[mortgage.mysite.com:8443]
Thu Nov 9 13:59:11 2000 Adding header [Referer]=[https://mortgage.mysite.com:8443/tangomain?bid=20654&rq=main]
Thu Nov 9 13:59:11 2000 Adding header [User-Agent]=[Mozilla/4.0 (compatible; MSIE 5.0; Windows NT)]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Accept]=[application/msword, application/vnd.ms-excel, application/vnd.ms-powerpoint
, image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, */*]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Accept-Encoding]=[gzip, deflate]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Accept-Language]=[en-us]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Cookie]=[sid=OgrzAW0CpixHnM5hf25UQv12qubTNcddw9FBmMGZ3PXY0IP1qQ3P0d1KcLRhMyb4LsJnXvh
mqdw3|-8399338697591569903/-1062728652/5/8173/8173/7002/7002/-1]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Host]=[mortgage.homeside.com:8443]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Referer]=[https://mortgage.mysite.com:8443/tangomain?bid=20654&rq=main]
Thu Nov 9 13:59:11 2000 Sending header to WLS [User-Agent]=[Mozilla/4.0 (compatible; MSIE 5.0; Windows NT)]
Thu Nov 9 13:59:11 2000 Sending header to WLS [WL-Proxy-SSL]=[true]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Proxy-Client-IP]=[10.155.217.195]
Thu Nov 9 13:59:11 2000 Header received from WLS : [HTTP/1.0 200 OK] = []
Thu Nov 9 13:59:11 2000 Header received from WLS : [Server] = [WebLogic 4.5.2 Service Pack 1 08/31/2000 09:51:21 #81452]
Thu Nov 9 13:59:11 2000 Header received from WLS : [Content-Type] = [text/html]
Thu Nov 9 13:59:11 2000 Responses from WLS:
Thu Nov 9 13:59:11 2000 Headers from WLS [1] ([Server],[WebLogic 4.5.2 Service Pack 1 08/31/2000 09:51:21 #81452])
Thu Nov 9 13:59:11 2000 Headers from WLS [2] ([Content-Type],[text/html])
Thu Nov 9 13:59:11 2000 operation READ failed on fd 8: revents=0x000000c0
Thanks in advance for any assistance.
Aaron

Env: hpux11, wls 4.5.2 w/sp1, apache 1.3.12.1
I am using Apache as the proxy for servlets. Apache serves all static content html/gifs.
The servlet request is forwarded to weblogic, and the servlet forwards the request to a jsp which responds with html output. Using IE 5, sometimes the images and html show up properly, other times the html code/tags is displayed. Using Netscape, the page does not display at all when the error occurs, otherwise it displays fine.
The problem occurs when refreshing the same page.
The errant display is HTML code/tags like:
<AREA SHAPE="RECT" COORDS="4,4,82,86"
Here are the httpd.conf settings for the wls plugin.
<Files *.jsp
SetHandler weblogic-handler
</Files
<Files *.ssi
SetHandler weblogic-handler
</Files
<Location /servletDispatcher
SetHandler weblogic-handler
</Location
WebLogicHost 192.168.12.63
WebLogicPort 8173
MatchExpression *.jsp
Debug ON
DebugConfigInfo ON
HungServerRecoverSecs 300
CookieName mycookie
In the debug log for wls plugin, the following failure message is logged to /tmp/wlproxy.log:
"operation READ failed on fd 8: revents=0x000000c0"
It looks like a socket error on the plugin. Has anyone seen this error or know what causes it?
The log message (in /tmp/wlproxy.log) for the entire request follows:
========New Request: [GET /tangomain?bid=20654&rq=rates HTTP/1.1] =========
Thu Nov 9 13:59:11 2000 Init: availcookie=[sid=OgrzAW0CpixHnM5hf25UQv12qubTNcddw9FBmMGZ3PXY0IP1qQ3P0d1KcLRhMyb4LsJnXvhmqdw3|-839933
8697591569903/-1062728652/5/8173/8173/7002/7002/-1]
Thu Nov 9 13:59:11 2000 In cookie2Servers, const c is 'sid=OgrzAW0CpixHnM5hf25UQv12qubTNcddw9FBmMGZ3PXY0IP1qQ3P0d1KcLRhMyb4LsJnXvhm
qdw3|-8399338697591569903/-1062728652/5/8173/8173/7002/7002/-1'Thu Nov 9 13:59:11 2000 In parseJVMID...'-8399338697591569903/-10627
28652/5/8173/8173/7002/7002/-1'!!Thu Nov 9 13:59:11 2000 Init: Preferred[0] = 192.168.12.52:8173
Thu Nov 9 13:59:11 2000 Init: Preferred[1] = :0
Thu Nov 9 13:59:11 2000 The request string is '/tangomain?bid=20654&rq=rates'
Thu Nov 9 13:59:11 2000 After trimming path: '/tangomain?bid=20654&rq=rates'
Thu Nov 9 13:59:11 2000 trying connect to PRIMARY '192.168.12.63'/8173
Thu Nov 9 13:59:11 2000 Host 192.168.12.63/8173 not found in the server list
Thu Nov 9 13:59:11 2000 Adding header [Accept]=[application/msword, application/vnd.ms-excel, application/vnd.ms-powerpoint, image/
gif, image/x-xbitmap, image/jpeg, image/pjpeg, */*]
Thu Nov 9 13:59:11 2000 Adding header [Accept-Encoding]=[gzip, deflate]
Thu Nov 9 13:59:11 2000 Adding header [Accept-Language]=[en-us]
Thu Nov 9 13:59:11 2000 Adding header [Connection]=[Keep-Alive]
Thu Nov 9 13:59:11 2000 Adding header [Cookie]=[sid=OgrzAW0CpixHnM5hf25UQv12qubTNcddw9FBmMGZ3PXY0IP1qQ3P0d1KcLRhMyb4LsJnXvhmqdw3|-8
399338697591569903/-1062728652/5/8173/8173/7002/7002/-1]
Thu Nov 9 13:59:11 2000 Adding header [Host]=[mortgage.mysite.com:8443]
Thu Nov 9 13:59:11 2000 Adding header [Referer]=[https://mortgage.mysite.com:8443/tangomain?bid=20654&rq=main]
Thu Nov 9 13:59:11 2000 Adding header [User-Agent]=[Mozilla/4.0 (compatible; MSIE 5.0; Windows NT)]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Accept]=[application/msword, application/vnd.ms-excel, application/vnd.ms-powerpoint
, image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, */*]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Accept-Encoding]=[gzip, deflate]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Accept-Language]=[en-us]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Cookie]=[sid=OgrzAW0CpixHnM5hf25UQv12qubTNcddw9FBmMGZ3PXY0IP1qQ3P0d1KcLRhMyb4LsJnXvh
mqdw3|-8399338697591569903/-1062728652/5/8173/8173/7002/7002/-1]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Host]=[mortgage.homeside.com:8443]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Referer]=[https://mortgage.mysite.com:8443/tangomain?bid=20654&rq=main]
Thu Nov 9 13:59:11 2000 Sending header to WLS [User-Agent]=[Mozilla/4.0 (compatible; MSIE 5.0; Windows NT)]
Thu Nov 9 13:59:11 2000 Sending header to WLS [WL-Proxy-SSL]=[true]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Proxy-Client-IP]=[10.155.217.195]
Thu Nov 9 13:59:11 2000 Header received from WLS : [HTTP/1.0 200 OK] = []
Thu Nov 9 13:59:11 2000 Header received from WLS : [Server] = [WebLogic 4.5.2 Service Pack 1 08/31/2000 09:51:21 #81452]
Thu Nov 9 13:59:11 2000 Header received from WLS : [Content-Type] = [text/html]
Thu Nov 9 13:59:11 2000 Responses from WLS:
Thu Nov 9 13:59:11 2000 Headers from WLS [1] ([Server],[WebLogic 4.5.2 Service Pack 1 08/31/2000 09:51:21 #81452])
Thu Nov 9 13:59:11 2000 Headers from WLS [2] ([Content-Type],[text/html])
Thu Nov 9 13:59:11 2000 operation READ failed on fd 8: revents=0x000000c0
Thanks in advance for any assistance.
Aaron

Weblogic 6.1 Apache 2.0 / 1.3 Windows NT

Similar Messages

Maybe you are looking for