Weblogic 6 - apache on NT

will there be a module for apache and weblogic 6 on NT?

Hello,
Please have a look on the following URL which is for Apache platform
support for WebLogic Server 6.1, 6.0 :
http://e-docs.bea.com/wls/platforms/index.html#apach
Hope this helps,
Regards
Apameh
Robert Eller wrote:
Hello,
Does anyone tried to get Apache 2.0 running under Windows NT with
Weblogic 6.1Sp1 together ?
Apache crashes on NT and i read BEA does not Support Apache under NT ?
Any idea.
Robert--
Developer Relations Engineer
BEA Support
Note : Please reply to the newsgroup. Don't reply to this mail alias.
This is used only for answering posts on WebLogic Newsgroups.

Similar Messages

Using Resin and Weblogic with Apache

Hi,
Does anybody know if i can use Weblogic to serve JSP and Resin to
serve some servlets within Apache?
Let me explain the case:
We are testing to setup Weblogic with Apache as the webserver.
Weblogic will be used to serve the JSP pages so i configured the
httpd.conf as follows:
<IfModule mod_weblogic.c>
MatchExpression *.jsp
WebLogicHost localhost
WebLogicPort [port]
</IfModule>
This works fine and i can serve the jsp-pages without any problems.
Since we work with thirdparty software we need to use Resin too. This
is not much trouble to implement in Apache and i can make sure that
some servlets are handled by caucho instead of Weblogic:
<Location /servlet/Inventory>
SetHandler caucho-request
</Location>
The above request works fine too!
However i have to load the resin.conf file for full use of Resin in
Apache. This setting however implicates that JSP pages aren't served
by Weblogic anymore but are sent to Resin also. Even with the
MatchExpression setting in httpd.conf, Apache still thinks JSP needs
to be sent to Resin instead of Weblogic.
Is there some way i can make sure that the JSP pages are served by
Weblogic and not by Resin???
Thanx in advance

Hi all,
Well, i figured it all out and if anyone would like to give it a try
to, just do the following.
The mod_caucho.so file was compiled with the option to handle .jsp
files. I hashed out the following line in
/src/c/plugin/common/config.c:
cse_add_locatio ..... jsp etc.
And then i configure the mod_caucho.so with:
./configure --with-apxs=/apps/apache/bin/apxs
Now i have a perfect mod_caucho.so file which does not handle .jsp.
All calls with .jsp are processed by weblogic, just as i wanted!
Have fun with it (i shall :-)
Remy
[email protected] (Remy) wrote in message news:<[email protected]>...
Hi,
Does anybody know if i can use Weblogic to serve JSP and Resin to
serve some servlets within Apache?
Let me explain the case:
We are testing to setup Weblogic with Apache as the webserver.
Weblogic will be used to serve the JSP pages so i configured the
httpd.conf as follows:
<IfModule mod_weblogic.c>
MatchExpression *.jsp
WebLogicHost localhost
WebLogicPort [port]
</IfModule>
This works fine and i can serve the jsp-pages without any problems.
Since we work with thirdparty software we need to use Resin too. This
is not much trouble to implement in Apache and i can make sure that
some servlets are handled by caucho instead of Weblogic:
<Location /servlet/Inventory>
SetHandler caucho-request
</Location>
The above request works fine too!
However i have to load the resin.conf file for full use of Resin in
Apache. This setting however implicates that JSP pages aren't served
by Weblogic anymore but are sent to Resin also. Even with the
MatchExpression setting in httpd.conf, Apache still thinks JSP needs
to be sent to Resin instead of Weblogic.
Is there some way i can make sure that the JSP pages are served by
Weblogic and not by Resin???
Thanx in advance

Weblogic Http Apache Plugin not working

Hi,
I have installed weblogic server 10.3 on WindowsXP Professional and Http Apache 2.2 is running on port 80. I followed the following document to configure the Apache plugin:
http://e-docs.bea.com/wls/docs103/plugins/apache.html
but when I go and test the plugin it always comes back with 404 page not found. As per the documentation I am testing it as
http://localhost:80/weblogic/
Here is my httpd.conf
Include "C:/bea/alui/plumtreeconf/"
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "C:/Program Files/Apache Software Foundation/Apache2.2" will be interpreted by the
# server as "C:/Program Files/Apache Software Foundation/Apache2.2/logs/foo.log".
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which httpd.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths to avoid confusion.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
ServerRoot "C:/Program Files/Apache Software Foundation/Apache2.2"
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule authn_alias_module modules/mod_authn_alias.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
#LoadModule disk_cache_module modules/mod_disk_cache.so
#LoadModule dumpio_module modules/mod_dumpio.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule filter_module modules/mod_filter.so
#LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
#LoadModule ldap_module modules/mod_ldap.so
#LoadModule logio_module modules/mod_logio.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule status_module modules/mod_status.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule unique_id_module modules/mod_unique_id.so
#LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule version_module modules/mod_version.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule weblogic_module modules/mod_wl_22.so
<IfModule mod_weblogic.c>
WebLogicHost localhost
WebLogicPort 7001
</IfModule>
<Location /weblogic>
SetHandler weblogic-handler
PathTrim /weblogic
</Location>
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User daemon
Group daemon
</IfModule>
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName localhost:80
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "C:/Program Files/Apache Software Foundation/Apache2.2/htdocs"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
ProxyRequests On
<Directory />
    Options FollowSymLinks
    AllowOverride None
    Order deny,allow
    Deny from all
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "C:/Program Files/Apache Software Foundation/Apache2.2/htdocs">
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    # The Options directive is both complicated and important. Please see
    # http://httpd.apache.org/docs/2.2/mod/core.html#options
    # for more information.
    Options Indexes FollowSymLinks
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   Options FileInfo AuthConfig Limit
    AllowOverride None
    # Controls who can get stuff from this server.
    Order allow,deny
    Allow from all
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
    DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
    Satisfy All
</FilesMatch>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "logs/error.log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common
    <IfModule logio_module>
      # You need to enable mod_logio.c to use %I and %O
      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here. Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    CustomLog "logs/access.log" common
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #CustomLog "logs/access.log" combined
</IfModule>
<IfModule alias_module>
    # Redirect: Allows you to tell clients about documents that used to
    # exist in your server's namespace, but do not anymore. The client
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://localhost/bar
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL. You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client. The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    ScriptAlias /cgi-bin/ "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin/"
</IfModule>
<IfModule cgid_module>
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #Scriptsock logs/cgisock
</IfModule>
# "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
</Directory>
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
<IfModule mime_module>
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    TypesConfig conf/mime.types
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #AddType application/x-gzip .tgz
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #AddHandler cgi-script .cgi
    # For type maps (negotiated resources):
    #AddHandler type-map var
    # Filters allow you to process content before it is sent to the client.
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #AddType text/html .shtml
    #AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://localhost/subscription_info.html
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#EnableMMAP off
#EnableSendfile off
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
#Include conf/extra/httpd-autoindex.conf
# Language settings
#Include conf/extra/httpd-languages.conf
# User home directories
#Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
#Include conf/extra/httpd-default.conf
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
#       starting without SSL on platforms with no /dev/random equivalent
#       but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>Is there anything else I need to add to this file. As I am trying to install ALUI and for this I need to add the plugin as when I go to my portal page none of the
images shows. Any help is appreciated.
Thanks

Hi,
There is patch for the webserver(Apache Plugin),thats needs to be downloaded from Metalink,dont use the default plugin that comes with the weblogic 10.3 installtion.
Regards,
Dinesh

WebLogic and Apache

Hi,
          We are developing an application using WebLogic ejb and servlet and we
          are planning to use Apache as the HTTP server. Are there any know
          issues about this combination?
          According to the manual, the mod_proxy of Apache can be used to link
          Apache and Weblogic. Has anybody done that?
          Thanks,
          Cecil Pang
          [email protected]


This doesn't sound like a definitive answer. Are you saying we will NOT
          support you if you use Apache?
          Should it work? What are people doing wrong? The answer below isn't
          much help IMHO.
          Prasad Peddada wrote:
          >
          > At this point we don't have plugins for Apache. We have plugins for NES, IIS only.
          >
          > Thanks
          > Prasad
          >
          > HBO wrote:
          >
          > > Barbara, thanks for the reply.
          > >
          > > So, are we saying that we should not use Apache with Weblogic Server? I
          > > browsed through the discussion groups and I found no definitive answer to this
          > > question. How about folks from BEA/Weblogic? What is your recommendation?
          > >
          > > At this point, we can either go with Apache or Netscape HTTP server. But we
          > > would like to use Apache unless there are issues in linking it to Weblogic
          > > Server.
          > >
          > > Any advice will be appreciated.
          > >
          > > Cecil Pang
          > > 10 Dimensions Technologies Inc.
          > > [email protected]
          > >
          > > Barbara Singer wrote:
          > >
          > > > Hello:
          > > >
          > > > We have tried to setup the exact configuration but with no success to date.
          > > > We are using WebLogic Application Server 4.51 and Apache by
          > > > Stronghold/C2Net. However, this has not worked with the standard Apache
          > > > distrubution either.
          > > >
          > > > /bas
          > > > HBO <[email protected]> wrote in message news:[email protected]...
          > > > > Hi,
          > > > >
          > > > > We are developing an application using WebLogic ejb and servlet and we
          > > > > are planning to use Apache as the HTTP server. Are there any know
          > > > > issues about this combination?
          > > > >
          > > > > According to the manual, the mod_proxy of Apache can be used to link
          > > > > Apache and Weblogic. Has anybody done that?
          > > > >
          > > > > Thanks,
          > > > > Cecil Pang
          > > > > [email protected]
          > > > >
          From Tom Gerber (Surnames: Archer, Knaeble, Lahiff, Mooney, Preisen,
          Sexton)

Integarte Weblogic with Apache on Windows

Hi guys,
Did any one integrate Weblogic server with Apache?
I tried but portal home page takes a lot of time to load.
I don't know why?
If any one tried this can you let me the know the steps or URL from where I can get info?
Thanks!

Here are some links that might be helpful
http://e-docs.bea.com/wls/docs81/plugins/overview.html
http://e-docs.bea.com/wls/docs70/plugins/apache.html
Seenu.

Starting up Weblogic with Apache.

We are currently migrating our site from NetDynamics to Weblogic Server.
In our current implementation we have three virtual host set up in Apache
Web server
and now these needs to talk to Weblogic for processing JSP/Servet request.
Now my question is I still want to use the same three virtual host to talk
to the default server setup in Weblogic.
All three virtual host points to different directories. How do I setup
Weblogic so that the same server can process
request from the three virtua hosts.
Thanks,
Rakesh

I know that there was a problem in which the Apache plug-in did not work
with virtual hosting on the Apache server. A fix was released for this.
You may want to first upgrade to the latest service pack. If that does not
work, you may want to contact technical support.
Thanks,
Michael
Michael Girdley
Product Manager, WebLogic Server & Express
BEA Systems Inc
"Rakesh Gupta" <[email protected]> wrote in message
news:3989aae7$[email protected]..
We are currently migrating our site from NetDynamics to Weblogic Server.
In our current implementation we have three virtual host set up in Apache
Web server
and now these needs to talk to Weblogic for processing JSP/Servet request.
Now my question is I still want to use the same three virtual host to talk
to the default server setup in Weblogic.
All three virtual host points to different directories. How do I setup
Weblogic so that the same server can process
request from the three virtua hosts.
Thanks,
Rakesh

Configuring Apache HTTP Server with Oracle Weblogic Server plugin

Hello friends,
I have a scenario of OIM 9.1.0.2 on Oracle Application Server 11g and Weblogic Server Apache HTTP Server.
Oracle WebLogic Server is configured in cluster (node1 and node2), also use the Oracle Weblogic Server plugin for integration with Apache.
One of the tests is to lose one of the nodes for the apache plugin redirects the node that has less overhead.
When the mode is node1 and node2 stop start mode and try to access the management console of Oracle Identity Manager, the plugin sometimes redirects to the other active node, and on another occasion shows the oracle management console identity manager without the colors of the basic look and feel.
Deputy of the Apache HTTP Server log, do you expect your comments to solve this case?
*************************************************log****************************************************
Server Details are:
OrigHostInfo [192.168.1.200]
isOrigHostInfoDNS [0]
Host [192.168.1.200]
Port [7002]
SecurePort [7004]
Mon Jan 30 22:10:43 2012 <2600713279794431> Initializing lastIndex=0 for a list of length=1
Mon Jan 30 22:10:43 2012 <2600713279794431> initJVMID: Trying to locate Primary or Secondary using SrvrInfo with JVMID [-872106207]
Mon Jan 30 22:10:43 2012 <2600713279794431> initJVMID: Found Primary 192.168.1.200:7002:7004
Mon Jan 30 22:10:43 2012 <2600713279794431> INFO: Closing SSL context
Mon Jan 30 22:10:43 2012 <2600713279794431> .....internal request /bea_wls_internal/WLDummyInitJVMIDs.....processed
Mon Jan 30 22:10:43 2012 <2600713279794431> getPreferredFromCookie: Found 1 servers
Mon Jan 30 22:10:43 2012 <2600713279794431> attempt #0 out of a max of 5
Mon Jan 30 22:10:43 2012 <2600713279794431> trying connect to PRIMARY '192.168.1.200'/7002/7004
Mon Jan 30 22:10:43 2012 <2600713279794431> getPooledConn: No more connections in the pool for Host[192.168.1.200] Port[7002] SecurePort[7004]
Mon Jan 30 22:10:43 2012 <2600713279794431> New SSL URL: match = 0 oid = 22
Mon Jan 30 22:10:43 2012 <2600713279794431> Connect returns -1, and error no set to 150, msg 'Operation now in progress'
Mon Jan 30 22:10:43 2012 <2600713279794431> EINPROGRESS in connect() - selecting
Mon Jan 30 22:10:43 2012 <2600713279794431> Setting peerID for new SSL connection
Mon Jan 30 22:10:43 2012 <2600713279794431> 0ae2 0436 0000 1b5c ...6...\
Mon Jan 30 22:10:43 2012 <2600713279794431> Local Port of the socket is 39186
Mon Jan 30 22:10:43 2012 <2600713279794431> Remote Host 192.168.1.200 Remote Port 7004
Mon Jan 30 22:10:43 2012 <2600713279794431> created a new connection to preferred server '192.168.1.200/7004' for '/xlWebApp/images/spacer.gif', Local port:39186
Mon Jan 30 22:10:43 2012 <2600713279794431> INFO: CA certificate missing basicConstraints, validation failed
Mon Jan 30 22:10:43 2012 <2600713279794431> ERROR: SSLWrite failed
Mon Jan 30 22:10:43 2012 <2600713279794431> SEND failed (ret=-1) at 793 of file ../nsapi/URL.cpp
Mon Jan 30 22:10:43 2012 <2600713279794431> *******Exception type [WRITE_ERROR_TO_SERVER] raised at line 794 of ../nsapi/URL.cpp
Mon Jan 30 22:10:43 2012 <2600713279794431> Marking 192.168.1.200:7004 as bad
Mon Jan 30 22:10:43 2012 <2600713279794431> got exception in sendRequest phase: WRITE_ERROR_TO_SERVER [os error=0, line 794 of ../nsapi/URL.cpp]: at line 3160
Mon Jan 30 22:10:43 2012 <2600713279794431> INFO: Closing SSL context
Mon Jan 30 22:10:43 2012 <2598413279794431>
================New Request: [GET /images/cab.gif HTTP/1.1] =================
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: SSL is configured
Mon Jan 30 22:10:43 2012 <2598413279794431> SSL Main Context not set. Calling InitSSL
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: SSL configured successfully
Mon Jan 30 22:10:43 2012 <2598413279794431> Using Uri /images/cab.gif
Mon Jan 30 22:10:43 2012 <2598413279794431> After trimming path: '/images/cab.gif'
Mon Jan 30 22:10:43 2012 <2598413279794431> adding prepend path: /xlWebApp/
Mon Jan 30 22:10:43 2012 <2598413279794431> The final request string is '/xlWebApp/images/cab.gif'
Mon Jan 30 22:10:43 2012 <2598413279794431> Host extracted from serverlist is [192.168.1.100]
Mon Jan 30 22:10:43 2012 <2598413279794431> Host extracted from serverlist is [192.168.1.200]
Mon Jan 30 22:10:43 2012 <2598413279794431> Initializing lastIndex=0 for a list of length=2
Mon Jan 30 22:10:43 2012 <2598413279794431> getListNode: created a new server node: id='192.168.1.100:7004,192.168.1.200:7004' server_name='OIMSERVER', port='443'
Mon Jan 30 22:10:43 2012 <2598413279794431> getPreferred: availcookie=[JSESSIONID=6RGCPnbTFRG7LBrTRpFnv1QLnQHkxkqr4pjGhhGJyrJWJ1rv86NK!-872106207!NONE]
Mon Jan 30 22:10:43 2012 <2598413279794431> Found cookie from cookie header: JSESSIONID=6RGCPnbTFRG7LBrTRpFnv1QLnQHkxkqr4pjGhhGJyrJWJ1rv86NK!-872106207!NONE
Mon Jan 30 22:10:43 2012 <2598413279794431> Parsing cookie JSESSIONID=6RGCPnbTFRG7LBrTRpFnv1QLnQHkxkqr4pjGhhGJyrJWJ1rv86NK!-872106207!NONE
Mon Jan 30 22:10:43 2012 <2598413279794431> getpreferredServersFromCookie: [-872106207!NONE]
Mon Jan 30 22:10:43 2012 <2598413279794431> primaryJVMID: [-872106207]
secondaryJVMID: [NONE]
Mon Jan 30 22:10:43 2012 <2598413279794431> No of JVMIDs found in cookie: 1
Mon Jan 30 22:10:43 2012 <2598413279794431> getPreferredFromCookie: Start Position is 0, listLen is 2
Mon Jan 30 22:10:43 2012 <2598413279794431> getPreferredFromCookie: Either JVMIDs not set or they are stale. Will try to get JVMIDs from WLS
Mon Jan 30 22:10:43 2012 <2598413279794431> initJVMID: Iterating SrvrList from position 0
Mon Jan 30 22:10:43 2012 <2598413279794431> ======internal request /bea_wls_internal/WLDummyInitJVMIDs======
initJVMID: Trying Host[192.168.1.100] Port[7004] SecurePort[7004] useSSL [1] ioTimeout [30] socketTimeout [2]
Mon Jan 30 22:10:43 2012 <2598413279794431> New SSL URL: match = 0 oid = 0
Mon Jan 30 22:10:43 2012 <2598413279794431> Connect returns -1, and error no set to 146, msg 'Connection refused'
Mon Jan 30 22:10:43 2012 <2598413279794431> Error connecting to host 192.168.1.100:7004
Mon Jan 30 22:10:43 2012 <2598413279794431> *******Exception type [CONNECTION_REFUSED] (Error connecting to host 192.168.1.100:7004 errno = 146) raised at line 1723 of ../nsapi/URL.cpp
Mon Jan 30 22:10:43 2012 <2598413279794431> initJVMID: Failed to retrieved JVMID for 192.168.1.100:7004:7004
Mon Jan 30 22:10:43 2012 <2598413279794431> initJVMID: Marked server as BAD
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: Closing SSL context
Mon Jan 30 22:10:43 2012 <2598413279794431> .....internal request /bea_wls_internal/WLDummyInitJVMIDs.....processed
Mon Jan 30 22:10:43 2012 <2598413279794431> ======internal request /bea_wls_internal/WLDummyInitJVMIDs======
initJVMID: Trying Host[192.168.1.200] Port[7004] SecurePort[7004] useSSL [1] ioTimeout [30] socketTimeout [2]
Mon Jan 30 22:10:43 2012 <2598413279794431> New SSL URL: match = 0 oid = 0
Mon Jan 30 22:10:43 2012 <2598413279794431> Connect returns -1, and error no set to 150, msg 'Operation now in progress'
Mon Jan 30 22:10:43 2012 <2598413279794431> EINPROGRESS in connect() - selecting
Mon Jan 30 22:10:43 2012 <2598413279794431> Setting peerID for new SSL connection
Mon Jan 30 22:10:43 2012 <2598413279794431> 0ae2 0436 0000 1b5c ...6...\
Mon Jan 30 22:10:43 2012 <2598413279794431> Local Port of the socket is 39188
Mon Jan 30 22:10:43 2012 <2598413279794431> Remote Host 192.168.1.200 Remote Port 7004
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: Certificate validation succeeded
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: Negotiated to cipher: 3
Mon Jan 30 22:10:43 2012 <2598413279794431> SSLWrite sent 171
Mon Jan 30 22:10:43 2012 <2598413279794431> SSLWrite completed, sent 171
Mon Jan 30 22:10:43 2012 <2598413279794431> Reader::fill() SSLRead returned: 0 290
Mon Jan 30 22:10:43 2012 <2598413279794431> URL::parseHeaders: CompleteStatusLine set to [HTTP/1.1 404 Not Found]
Mon Jan 30 22:10:43 2012 <2598413279794431> URL::parseHeaders: StatusLine set to [404 Not Found]
Mon Jan 30 22:10:43 2012 <2598413279794431> parsed all headers OK
Mon Jan 30 22:10:43 2012 <2598413279794431> Parsing cluster list: -872106207!182584374!7002!7004
Mon Jan 30 22:10:43 2012 <2598413279794431> parseJVMID: Parsing JVMID '-872106207!182584374!7002!7004'
Mon Jan 30 22:10:43 2012 <2598413279794431> parseJVMID: Actually parsing '-872106207!182584374!7002!7004'
Mon Jan 30 22:10:43 2012 <2598413279794431> ServerInfo struct for JVMID '-872106207' populated
Server Details are:
OrigHostInfo [192.168.1.200]
isOrigHostInfoDNS [0]
Host [192.168.1.200]
Port [7002]
SecurePort [7004]
Mon Jan 30 22:10:43 2012 <2598413279794431> Initializing lastIndex=0 for a list of length=1
Mon Jan 30 22:10:43 2012 <2598413279794431> initJVMID: Trying to locate Primary or Secondary using SrvrInfo with JVMID [-872106207]
Mon Jan 30 22:10:43 2012 <2598413279794431> initJVMID: Found Primary 192.168.1.200:7002:7004
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: Closing SSL context
Mon Jan 30 22:10:43 2012 <2598413279794431> .....internal request /bea_wls_internal/WLDummyInitJVMIDs.....processed
Mon Jan 30 22:10:43 2012 <2598413279794431> getPreferredFromCookie: Found 1 servers
Mon Jan 30 22:10:43 2012 <2598413279794431> attempt #0 out of a max of 5
Mon Jan 30 22:10:43 2012 <2598413279794431> trying connect to PRIMARY '192.168.1.200'/7002/7004
Mon Jan 30 22:10:43 2012 <2598413279794431> getPooledConn: No more connections in the pool for Host[192.168.1.200] Port[7002] SecurePort[7004]
Mon Jan 30 22:10:43 2012 <2598413279794431> New SSL URL: match = 0 oid = 22
Mon Jan 30 22:10:43 2012 <2598413279794431> Connect returns -1, and error no set to 150, msg 'Operation now in progress'
Mon Jan 30 22:10:43 2012 <2598413279794431> EINPROGRESS in connect() - selecting
Mon Jan 30 22:10:43 2012 <2598413279794431> Setting peerID for new SSL connection
Mon Jan 30 22:10:43 2012 <2598413279794431> 0ae2 0436 0000 1b5c ...6...\
Mon Jan 30 22:10:43 2012 <2598413279794431> Local Port of the socket is 39189
Mon Jan 30 22:10:43 2012 <2598413279794431> Remote Host 192.168.1.200 Remote Port 7004
Mon Jan 30 22:10:43 2012 <2598413279794431> created a new connection to preferred server '192.168.1.200/7004' for '/xlWebApp/images/cab.gif', Local port:39189
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: CA certificate missing basicConstraints, validation failed
Mon Jan 30 22:10:43 2012 <2598413279794431> ERROR: SSLWrite failed
Mon Jan 30 22:10:43 2012 <2598413279794431> SEND failed (ret=-1) at 793 of file ../nsapi/URL.cpp
Mon Jan 30 22:10:43 2012 <2598413279794431> *******Exception type [WRITE_ERROR_TO_SERVER] raised at line 794 of ../nsapi/URL.cpp
Mon Jan 30 22:10:43 2012 <2598413279794431> Marking 192.168.1.200:7004 as bad
Mon Jan 30 22:10:43 2012 <2598413279794431> got exception in sendRequest phase: WRITE_ERROR_TO_SERVER [os error=0, line 794 of ../nsapi/URL.cpp]: at line 3160
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: Closing SSL context
Thanks

"One of the tests is to lose one of the nodes for the apache plugin redirects the node that has less overhead."
Note that the plug-in does a round robin load balancing, for example, in the case of three server (1,2,3) it does 1-2-3-1-2-3-1...
with server 3 going down it does 1-2-1-2-1...
An example configuration (with SSL off) looks as follows:
LoadModule weblogic_module   "/home/oracle/weblogic12.1.1/apache/modules/mod_wl.so"
<IfModule weblogic_module>
     ConnectTimeoutSecs 10
     ConnectRetrySecs 2
     DebugConfigInfo ON
     WLSocketTimeoutSecs 2
     WLIOTimeoutSecs 300
     Idempotent ON
     FileCaching ON
     KeepAliveSecs 20
     KeepAliveEnabled ON
     DynamicServerList ON
     WLProxySSL OFF
</IfModule>
<Location /LoadTest6>
     SetHandler weblogic-handler
     WebLogicCluster 172.31.0.175:7002,172.31.0.113:7003
</Location>Also see the complete example here: http://middlewaremagic.com/weblogic/?p=7795
"the plugin sometimes redirects to the other active node"
This is somewhat strange, do you have session binding turned off?
"and on another occasion shows the oracle management console identity manager without the colors of the basic look and feel."
This could happen due to mime types (not really sure just a hunch). Here is a general story on this concept: https://developer.mozilla.org/en/Properly_Configuring_Server_MIME_Types
and the apache module: http://httpd.apache.org/docs/2.2/mod/mod_mime.html

Apache Proxy Plugin (2.22) and Weblogic 9.2 - using SSL

Hello,
I need some help configuring Apache 2.22 to proxy to Weblogic 9.2. I'm able to do this without SSL. But when I introduce SSL into the mix, it does not work. Here's what I'm doing:
1. I set the secure port in the httpd.conf file (7002 is my secure port) - this is within a IfModule mod_weblogic.c tag:
WebLogicHost WLServer
WebLogicPort 7002
2. I download the secure certificate for my weblogic site by double-clicking on the secure lock icon in IE6. When the Certificate window opens, I go to the Details tab and click the Copy to File button. In the Certificate Download Wizard, I click Next and select Base-64 encoded X.509 (.CER) option and click Next again. Then I enter a path and filename for the certificate file and click Next and then Finish.
3. I enter the following parameters in the httpd.conf file (this is not in any tag like IfModule - is that wrong?):
SecureProxy ON
TrustedCAFile "C:\Program Files\Apache Software Foundation\Apache2.2\WLServer_TrustedCA.cer"
4. I restarted Weblogic and Apache
5. When I try to go to my web site, I get the following error:
Failure of server APACHE bridge:
No backend server available for connection: timed out after 10 seconds or idempotent set to OFF.
Can someone please help?
Thanks much,
Alex

Thanks Hussain for replying. I was able to set this up using Max Button's post (see my earlier post from today). The parameters I set inside the <Location> tag are:
SecureProxy ON
WLProxySSL ON
RequireSSLHostMatch false
TrustedCAFile C:\PROGRA~1\APACHE~1\Apache2.2\WLServer_TrustedCA.pem
EnforceBasicConstraints false
Thanks for looking into this anyhow!

Weblogic 8.1 Apache Plug-In

Where can I find the plug-in for WLS 8.1/Apache 2.0/Windows 2003?

Hi Vishwas,
Thank you for the reply. I forgot to mention that Apache and WebLogic are on Solaris 9 platform.
Accesing a webapp hosted on WebLogic through Apache->plug-in->WebLogic return 500 internal server error, but other webapps hosted on the same WebLogic domain works properly. Looking at the Response Hdrs from WebLogic shows that WLS returns transfer-encoding=chunked. The other webapps which work properly has content-length set and transfer-encoding is not chunked.
So, the question is does Apache Plug-in for weblogic 8.1 SP5 read the chunked data properly?
Thanks,
Janani

Problems using 4096 bit SSL certificate with WebLogic Apache 2.2 plug-in

Hi,
'm using WebLogic 9.2 MP3 and Apache HTTP Server (version 2.2) Plug-In. For security reasons, I have SSL installed on both Apache and WebLogic. So Apache must communicate with WebLogic via https.
I get the following error when attempting to access WebLogic via Apache:
Internet Explorer cannot display the webpage
These are the last lines in wlproxy log:
Fri Feb 26 14:08:59 2010 <71212672221392> INFO: SSL is configured
Fri Feb 26 14:08:59 2010 <71212672221392> SSL Main Context not set. Calling InitSSL
Fri Feb 26 14:08:59 2010 <71212672221331> INFO: Initializing SSL library
I've found that the problem is caused by using a 4096 bit intermediate cert. When I include this 4096 bit cert in the file referenced by plugin parameter "TrustedCAFile", it is unable to load it. I've tested 4096 bit certs from a few different certificate authorities, and consistently see this problem, so I know the problem is not related to the specific certificate. If I use a 2048 bit intermediate certificate, everything works perfectly fine.
Do you know if there are limitations to the certificate length that the plug-in can use?

Yes 4096 bit Certificates are not supported by the plugin.
You can use up to 2048 bit.
There is a Bug which clearly mentions it.
I dont remember the Bug Number, but an Oracle Support person will be able to tell you.
Hope this helps.
Faisal Khan
Edited by: Faisal Khan on Feb 27, 2010 2:08 PM

Apache Proxy Plug-in with WebLogic 8.1 SP5 - Transfer Encoding:Chunked

Hello All,
Configuration: Apache 2.0.48
Plugin - mod_wl128_20.so
WebLogic Version - 8.1 SP5
There is no SSL between Apache and WebLogic server.
Apache seems to have issue when the response from WebLogic has: Hdrs from WLS:[Transfer-Encoding]=[chunked]
I turned on the debugging on Apache side with DebugAll flag and WLS sends data to Apache plug-in.
Is is a known issue? Is there any CR to fix it? Please let me know if you need further details.
Any help is appreciated.
Thanks,
Janani

Hi Vishwas,
Thank you for the reply. I forgot to mention that Apache and WebLogic are on Solaris 9 platform.
Accesing a webapp hosted on WebLogic through Apache->plug-in->WebLogic return 500 internal server error, but other webapps hosted on the same WebLogic domain works properly. Looking at the Response Hdrs from WebLogic shows that WLS returns transfer-encoding=chunked. The other webapps which work properly has content-length set and transfer-encoding is not chunked.
So, the question is does Apache Plug-in for weblogic 8.1 SP5 read the chunked data properly?
Thanks,
Janani

Can't install weblogic server sp5(apache bridge) on linux

Hi.
I can't install weblogic server service pack 5(weblogic for apache
bridge,mod_wl.so) on redhat linux 6.2,my apache server version is 1.3, and
it work without sp5,when I use new mod_wl.so overwrite old one, apache
server can't start.
Please help,
Thanks
Jason Shi([email protected])

What exact problems are you having? I'm using WLS 5.1 SP5 + apache
1.3.12 + mod_ssl just fine.
John Salvo
Jason wrote:
>
Hi.
I can't install weblogic server service pack 5(weblogic for apache
bridge,mod_wl.so) on redhat linux 6.2,my apache server version is 1.3, and
it work without sp5,when I use new mod_wl.so overwrite old one, apache
server can't start.
Please help,
Thanks
Jason Shi([email protected])

Weblogic 5.1 sp3 with Apache or Stronghold on Solaris 2,7

Hi All,
We are planning to use Apache or Stronghold(most probably Stronghold as it
supports SSL which I was told Apache does not support) and WebLogic 5.1 sp
3. Has anyone used this combination before if so we would like to know if
you have faced any integration issues with this ? If you do what kind of
integration issues were they ? Just connection related or scalability
related ? Has anyone used WebLogic built-in webservevr in production
environment ? How does it scale up ?
Thanks
Prasad

Would you please let me know when exactly(date) the sp4 was released
Thanks,
Ravi.
Vinod Mehra <[email protected]> wrote:
Checkout the 510 service pack 4. It has these binaries:
1. mod_wl.so for standard Apache (non EAPI) installations
2. mod_wl_ssl.so for Apache + SSL/EAPI installations(Stronghold, modssl etc)
3. mod_wl_ssl_raven.so for Apache + Raven installations
mod_wl_ssl_raven.so was required because Raven applies frontpage patches which
makes it incompatible with mod_wl_ssl.so
--Vinod.
Filip Hanik wrote:
Apache supports SSL with two implementations
1. http://www.apache-ssl.org/
2. Apache with OpenSSL (mod_ssl)
On Solaris there are no problems integrating weblogic and Apache.
I would not recommend using the weblogic web server, the performance of image
streaming and serving static webpages is not the greatest - apache will do a
much better job for you.
Weblogic also has a plug in for apache on Solaris that supports fail over. ie.
if one of your weblogic server goes down then apache can reconnect to another
one
Filip Hanik
[email protected]
In article <396a70f4$[email protected]>,
[email protected] says...
Hi All,
We are planning to use Apache or Stronghold(most probably Stronghold as it
supports SSL which I was told Apache does not support) and WebLogic 5.1 sp
3. Has anyone used this combination before if so we would like to know if
you have faced any integration issues with this ? If you do what kind of
integration issues were they ? Just connection related or scalability
related ? Has anyone used WebLogic built-in webservevr in production
environment ? How does it scale up ?
Thanks
Prasad

How to install Apache-Weblogic brige for Windows NT 4.0

I had installed weblogic 5.1 and Apache 1.3.6 at Windows NT 4.0 SP4.Use
apache as web server ,weblogic as web application server. But I can not find
the way to install Apache-Weblogic brige, can anybody help me?

That is correct. However, we plan to add ports to these other platforms in
the future.
Thanks,
Michael
Michael Girdley
WLS Product Manager
cedar z <[email protected]> wrote in message
news:8ec3s4$5pv$[email protected]..
It's seem that wl5.1 has no weblogic-to-apache brige for window NT.
zhao wrote in message <8ebo1h$2gs$[email protected]>...
I had installed weblogic 5.1 and Apache 1.3.6 at Windows NT 4.0 SP4.Use
apache as web server ,weblogic as web application server. But I can notfind
the way to install Apache-Weblogic brige, can anybody help me?

Overriding default errror page for Apache-Weblogic bridge

I am writing this problem again as nobody has replied me with any solution.
I want to overide the default error page that comes up when weblogic is down
for some reason in apache-weblogic bridge. I looked into the weblogic
documentation and specfied the following in the apache configuration file
ErrorPage http://www.domain.com/systemerror.html
But for some reason it is not able to locate the domain as well as the page.
But if try the same url in the browser, it works. Please help.
Rakesh

I am using the plugin and using the error page successfully. Apache and WL
use the same document root, and the error page is located within the
document root:
Within the httpd.conf, I have:
<IfModule mod_weblogic.c>
# Config file for WebLogic which defines parameters for plugin
Include conf/weblogic.conf
</IfModule>
Within the weblogic.conf, I have:
ErrorPage unavailable.html
Provide your configuration settings.
"Rakesh Gupta" <[email protected]> wrote in message
news:39d3bcd3$[email protected]..
Well, we are using weblogic supplied apache plugin and I am following all
the steps that is specified in setting up apache plugins in weblogic
documentation. I do not think it is apache network problem as apache is
working fine.
The think the problem is somewhere in the weblogic-apache plugin module.
"Jesse E Tilly" <[email protected]> wrote in message
news:[email protected]..
[email protected] (Rakesh Gupta) wrote in <[email protected]>:
I am writing this problem again as nobody has replied me with any
solution.
I want to overide the default error page that comes up when weblogic is
down for some reason in apache-weblogic bridge. I looked into the
weblogic documentation and specfied the following in the apache
configuration file
ErrorPage http://www.domain.com/systemerror.html
But for some reason it is not able to locate the domain as well as the
page. But if try the same url in the browser, it works. Please help.
Rakesh
as worded, that sounds like a network setup problem on the apache server
side.
however, it seems that you want a server-connection-timeout error toreturn
an specific error page via the plug-in. This all depends on how theplugin
works. If it is how I think it works, there needs to be an INI
setting
to sepcify a page. Why? Because the plug-in effectively has control of
the response. It either needs a way hand control back to the web serveror
needs to have error pages of its own.
BEA?
Jesse

Weblogic 6 - apache on NT

Similar Messages

Maybe you are looking for