Weblogic 64 bit on windows

Hi,
I am looking to install a 64 bit version of Weblogic Server on Windows and am not able to find one.
Where do i get the download file?
Thanks!

Hi,
For 64 bit architecture operating Systems you need to use *"Generic Jar Installer"*
Please refer to the following link:
Topic: Using WebLogic Generic Jar Installer
http://middlewaremagic.com/weblogic/?p=2731
WebLogic 10.3.5 Generic Jar: http://download.oracle.com/otn/nt/middleware/11g/wls/1035/wls1035_generic.jar
WebLogic 10.3.4 Generic Jar: http://download.oracle.com/otn/nt/middleware/11g/wls/wls1034_generic.jar
WebLogic 10.3.3 Generic Jar: http://download.oracle.com/otn/nt/middleware/11g/wls1033_generic.jar
WebLogic 10.3.2 Generic Jar: http://download.oracle.com/otn/nt/middleware/11g/wls/net_wls1032_generic.jar
WebLogic 10.3.0 Generic Jar: http://download.oracle.com/otn/bea/weblogic/server103/net_server103_generic.jar

Similar Messages

Weblogic server for Windows 7 64 bit operating system

Hi,
I have installed Personal Oracle 11g on my laptop. Next, I would like to install the weblogic server and then the Fusion middle ware. My goal is to have Oracle Forms, reports and discoverer running on the laptop. I dont see Weblogic server 64 bit for windows in the oracle product matrix. Can anyone suggest where I can get weblogic server for Winfows 7 64 bit machine?
Thanks,
RV

Hi,
Oracle WebLogic Server Downloads can be found at http://www.oracle.com/technology/software/products/ias/htdocs/wls_main.html
I believe Oracle WebLogic Server is not certified yet on Windows 7 64-bit, and this explains why you cannot find installation files to download. More details about the product certification can be found at:
Oracle Certification Matrix
http://www.oracle.com/technology/support/metalink/index.html
Regards,
Hussein

Weblogic 11g on Windows 2008 64 bit

It appears that Weblogic 11g for windows only comes in 32 bit and can run ok on 64 bit. I have 24 Gb of memory on the server and my question is will forms and reports user sessions be able to access all the memory? Or since Weblogic is 32 bit, will any forms and reports sessions be restricted to the first 3Gb of memory?
Edited by: user1065650 on Apr 3, 2012 2:21 PM

Hi
Weblogic 11g does come both for 32 Bit and 64 Bit for both Windows and Unix OS. Its just that for 64 Bit OS, for Windows, you need to download WLS Generic Installer (.jar extension) and follow the steps.
See this link and another post in this link for more details:
required weblogic 10.3.5 instllable for windows server 2008(64bit)
If you download and run .exe installer, yes it is 32 Bit. But for 64 bit machines, download .jar installer.
Thanks
Ravi Jegga

Upgrading windows 7 home premium 64 bit to windows 7 professional 64 bit

Can I upgrade Windows 7 Home Premium SP1 64 bit to Windows 7 Professional 64 bit without losing my program information, my settings or my desktop? If yes, how to proceed?
Thank you for your answer! Manuel

Apologies about the delay. I've been brooding.
Although we don't know where the specific relevant keys are on modern versions of iTunes, there's a shotgun approach we can take to dealing with them, which has a reasonable chance of success in this case. The complicating factor in your case is that you've got a 64-bit Windows. So there's an extra hoop to jump through.
The basic approach is the procedure from the following weblog entry:
[Solving setup errors by using the SubInACL tool to repair file and registry permissions|http://blogs.msdn.com/astebner/archive/2006/09/04/solving-setup-err ors-by-using-the-subinacl-tool-to-repair-file-and-registry-permissions.aspx]
The complicating factor is that we have to make an additional edit to the reset.cmd file.
When you're in Notepad, replacing the two YOURUSERNAME values with the name of your Windows 7 user account, in the first line of the batch file, replace the:
%programfiles%
... with:
%ProgramFiles(x86)%
(On a 64-bit Windows system, subinacl is installed in a different location than on 32-bit systems. So unless we make that change, the reset.cmd isn't going to be able to find subinacl and the reset.cmd won't work.)
While you're in Notepad editing the file, make sure each of the nine lines of the file start of a new line. (Sometimes they get smooshed up together on a single line, and then again the reset.cmd won't work.)
I'd strongly suggest setting up a System Restore point immediately prior to running the reset.cmd. There's instructions on that in the following document:
http://www.bleepingcomputer.com/tutorials/tutorial143.html#manual

Weblogic 7 for Windows

Hello,
I need some details.
Environment:
Weblogic 7.0 with some libraries which I can't see...
Windows 2000 Server, SP3
RedHat Linux 7.3, Apache 1.3.27
Where are weblogic_sp.jar, ext\ora920, ...?
http://e-docs.bea.com/wls/certifications/certifications/win2000.html#39532
http://edocs.bea.com/platform/docs70/support/supp_plat.html#975283
I found 2 very different pages... so a little bit confused. Different info
on those pages.
Where can I find Weblogic SP2 for Windows 2000 SP 3, ... For instance, in my
evaluation version there is no JDBC test tool, but there is driver for
Oracle 9.2.....
At "production", there is no driver for Oracle 9.2....
Also, about Apache 1.3.27. Is it supported?
"Smart Update" does not work...
It work at home, just now it shows that I need Service Pack 2 (7.0.2.0) for
my evaluation, but it does not work at "production", hope that problem is
only with firewall...
Thanks,
Fuad Efendiyev

Wayne,
Thank you,
The problem is that I know 2 sources to download Weblogic v.7 SP2:
http://commerce.bea.com
http://support.bea.com
I downloaded evaluation from first source 2 months ago, I downloaded also
version from second source yesterday. This versions are very different, and
I have not received any notification, have not seen any alert at BEA
website. (Now, both versions, from both sources, are the same)
The latest version installs empty folder ....\server\lib\linux
This folder should contain mod_... files, plug-in for Linux 1.3.27
However, I found necessary "plug-in" files when directly unzipped file
"server702_win32.exe".
May be installer checks "license.bea"? Tomorrow I'll check with production
license.
For evaluation, everything should be up-to-date.
I tried to find exact information, whether Weblogic SP2 (on Windows 2000
SP3) supported with Apache 1.3.27 (on Linux), and I found very strange
information at
http://e-docs.bea.com/wls/certifications/certifications/win2000.html#39532
"Certifications", Apache plug-in, 2.0.39
http://edocs.bea.com/platform/docs70/support/supp_plat.html#975283
"Support", "WebLogic Server certified on version 1.3.9 and higher" - ...
Sorry, I can't understand...
I would like also to see good API DOC, existing one does not contain some
information on some important classes which are mentioned throughout the
web-site.
I would like to see more about "weblogic-tags.jar", it is large enough
library for possible bugs...
Respectfully,
Fuad.
"Wayne W. Scott" <[email protected]> wrote in message
news:[email protected]...
Hello:
The charts you were looking at are just different presentations of material.
One shows
all of the supported WLS versions and SPs on Windows 2000. The other is a
list of all
the supported platforms for WebLogic Platform 7.0.
The bottom line is, WebLogic 5.1 through 7.0 all run on Windows 2000.
> Where can I find Weblogic SP2 for Windows 2000 SP 3 ...
What do you need? WebLogic 7.0 SP2? Just the SP upgrade or the whole
product?
You may download products at http://commerce.bea.com/downloads/products.jsp
HTH,
Wayne Scott
Fuad Efendiyev wrote:
By the way,
http://support.bea.com
- tried to register my evaluation license, something happened, sitestopped
responding...
After registering I should be able to download some patches.
Sorry for sending E-mail to this group, I really don't know where to send,
site stopped after I've changed something in my profile - is Weblogic
running on Microsoft?
Most probably I am using IE of MS...
"Fuad Efendiyev" <[email protected]> wrote in message
news:[email protected]...
Hello,
I need some details.
Environment:
Weblogic 7.0 with some libraries which I can't see...
Windows 2000 Server, SP3
RedHat Linux 7.3, Apache 1.3.27
Where are weblogic_sp.jar, ext\ora920, ...?
http://e-docs.bea.com/wls/certifications/certifications/win2000.html#39532
http://edocs.bea.com/platform/docs70/support/supp_plat.html#975283
I found 2 very different pages... so a little bit confused. Different info
on those pages.
Where can I find Weblogic SP2 for Windows 2000 SP 3, ... For instance, inmy
evaluation version there is no JDBC test tool, but there is driver for
Oracle 9.2.....
At "production", there is no driver for Oracle 9.2....
Also, about Apache 1.3.27. Is it supported?
"Smart Update" does not work...
It work at home, just now it shows that I need Service Pack 2 (7.0.2.0)for
my evaluation, but it does not work at "production", hope that problem is
only with firewall...
Thanks,
Fuad Efendiyev

Install Oracle DB 32-bit on Windows 2003 Server EM64T

I need to know if i can install Oracle 10.1.0.3 32 bit or 10gR2 32 bit on Windows
Standard Edition 2003 64 with Intel Xeon -64 bit?
Tks,
Elber

You must use the 64 bit edition. Only 10gR2 64bit is certified for this platform, 10gR1 was not produced for 64 bits and the 32bit edition is not supported.
From the Certify Matrix it states "Running 32-bit applications on a 64-bit operating system is generally referred to as "Compatibility-Mode" by many AMD64/EM64T hardware vendors. Irrespective of this terminology, 32-bit Oracle Database server is *not* certified on Windows x64. For the 32-bit Oracle database client, check the certification matrix for more details.".
~ Madrid
http://hrivera99.blogspot.com/

Migration from Oracle 9i 32 bit to Oracle 10G 64 bit on Windows 2003 Server

I am working on migrating Oracle 9i 32 bit to Oracle 10G 64 bit on Windows 2003 from Old server to new server. We have db around 500 GB and 3 schemas. I installed Oracle 10G on new server, created tablespaces, schema's blah blah and now doing export and import at schema level from old server to new server.
Import is taking more than 4 to 5 hours on new server. My manager is saying, window time is bit longer and he wants me to try possiblities to make this process faster. Can some one help me on this, to use the best possible method to complete this process faster?
Will below step work, if I try?
If I install, oracle 9i and 10g both on new server in different home directories and take the hot backup from old machine and restore on new machine in 9i home directory and use the upgrade configuration assistant from 10g and do the upgrade? Pls advice.
Thanks in advance,
Hari babu
Edited by: user6367891 on Mar 2, 2010 5:28 AM

It looks good.
I have one question in below steps:
To migrate an Oracle9i or older database to an Oracle Database 10g Release 1 (10.1) database for 64-bit Windows:
1 Perform steps 1 - 11 in "Migrating an Oracle Database 10g Release 1 (10.1) Database".
2 Shut down the database on the 64-bit computer:
SQL> SHUTDOWN IMMEDIATE;
3 Start the database migration:
SQL> STARTUP MIGRATE;
4 Migrate the database as described in Chapter 3, "Upgrading a Database to the New Oracle Database 10g Release" in Oracle Database Upgrade Guide.
In step 4, it says, migrate database as described in chapter 3. In chapter 3, it says, to do the upgrade the process using dbca or manually. Pls confirm whether do the upgrade process after issuing startup migrate or not.
Thanks in advance.

Is it Possible to install ODDC 32 bit on Windows Server 2008 R2(64bit)?

Hi All,
Is it Support to Install ODDC 32 bit on Windows Server 2008 R2(64 bit).
I am Posting this bcoz I did not found any ODDC related Blogs.
Please help on this
Thanks,
Raj

The certification matrix ( http://www.oracle.com/technetwork/middleware/webcenter/content/odc-cert-matrix-214688.pdf ) does not mention OS for ODDC Server, but as ODC is certified for Win Server 2008, R2, 32 or 64 bit, I believe the answer is yes.
Make sure, however, that you ODDC clients run on a different OS (see Exceptions).

I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit. Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help. Currently I am running Version 3.0.4 (322).

I need to know which update(s) I can apply to help stabalize the system.

Typing the body of the thread message in the title, huh? -)
I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit. Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help. Currently I am running Version 3.0.4 (322).
Only Apple could hamstring and tie Mac OS to Windows. There isn't any other than whether you can download the drivers into Windows (you can) but Apple puts a block on the installer setup even if your mac does not support it.
Windows 7 needs at least Boot Camp 3.1 and 3.3 is what you should already have. And you are not getting security updates if you don't have at least 10.6.8 as was pointed out. --- you arent using Software Update as you should. And you should backup and clone Mac (and Windows) as well.
You need Mountain Lion to use Boot Camp 5.x which supports Windows 7 & 8 and 64-bit.
I would upgrade to Lion if you can realizing that Rosetta and PowerPC are no longer supported though.
Mac 101: Using Windows on your Mac via Boot Camp
https://support.apple.com/kb/HT1461
http://www.apple.com/support/bootcamp/
Helpful Apple Support Resources (Forum Overview)
Boot Camp Support
Boot Camp Manuals
Boot Camp 5.0 Drivers
http://support.apple.com/kb/DL1638
Frequently asked question
http://support.apple.com/kb/HT4818
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdfcreate a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
https://support.apple.com/kb/HT4569
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf
Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
http://www.apple.com/support/bootcamp/
Is there a download of the Boot Camp 5 Support Software if I'm not using OS X Mountain Lion v10.8.3?
Yes, you can download the Boot Camp 5 Support Software here.
http://support.apple.com/kb/DL1638
How do I use the Boot Camp 5 Support Software I downloaded from the web page?
The download file is a .zip file. Double click it to uncompress it.
Double-click the Boot Camp disk image.
Copy the Boot Camp and "$WinPEDriver$" folders to the root level of a USB flash drive or hard drive that is formatted with the FAT file system (see question below for steps on how to format).
Install Windows, leaving the flash or hard drive attached to the USB port of your Mac.
Installation of the drivers can take a few minutes. Don't interrupt the installation process. A completion dialog box will appear when everything is installed. Click Finish when the dialog appears.
When your system restarts your Windows 8 installation is done.
Note: If the flash drive or hard drive was not attached when you installed Windows and was inserted after restarting into Windows 8, double-click the Boot Camp folder, then locate and double click the "setup.exe" file to start the installation of the Boot Camp 5 Support Software.
How do I format USB media to the FAT file system?
Use Disk Utility to format a disk to use with a Windows computer. Here's how:
Important: Formatting a disk erases all the files on it. Copy any files you want to save to another disk before formatting the disk.
Open Disk Utility.
Select the disk you want to format for use with Windows computers.
Click Erase, and choose one of the following from the Format pop-up menu:
If the size of the disk is 32 GB or less, choose MS-DOS (FAT).
If the size of the disk is over 32 GB, choose ExFAT.
Type a name for the disk. The maximum length is 11 characters.
Click the Erase button and then click Erase again.
Which versions of Windows are supported with Boot Camp 5?
64-bit versions of Windows 8 and Windows 7 are supported using the Boot Camp 5 Support Software. If you need to use a 32-bit version, you need to use Boot Camp 4 Support Software, and you must use Windows 7. 32-bit versions of Windows 8 are not supported via Boot Camp. For a complete list of Windows OS support, click here.

ITunes 32-bit upgrade to iTunes 64-bit on Windows 7 64 bit

Hi there!
I have a question about upgrading iTunes from 32-bit to 64-bit on Windows.
As I always do when I reformat my computer I save my "iTunes Library.itl" files and all those other files, backup my iTunes Music folder etc. Then I re-install iTunes on the new computer and put the iTunes Music folder and the library files back into their places and iTunes works just fine.
My question is this. I'm curently upgrading from Vista 32-bit to Win7 64-bit.
I can probaly keep using iTunes 32-bit in Win7 64-bit but what's the point. I have to make the transition some time anyway. So my question is. Can I do as I always do, install iTunes 32-bit in Win7 64-bit, as my files and then install iTunes 64-bit over the 32-bit installation? Or can a clean iTunes 64-bit installation use my old "iTunes Library.itl" files etc from my 32-bit installation of iTunes?
I hope this makes any sens.
Message was edited by: MrViklund

I have the answer and this might be useful for any one else wondering about this in the future. If it helped you or explained what you wanted to know. Replay to the post pls
It's quite easy actually. First have your "iTunes Library Extras", "iTunes Library Genius", "iTunes Library", and "iTunes Music Library" backed up. Download ans install iTunes 64-bit. I don't know what's so 64-bit about iTunes 64 since Win7 reports it as a 32-bit application in the task manager. But anyway. Install iTunes 64 and launch it. If you migrated your library to another drive like me go to settings in iTunes and change the directory to your location. Close iTunes. Replace the newly created files with your backed up files. Launch iTunes. iTunes will load and then update your library and from there you are set to go! so basically it is just like a normal upgrade. But if you hesitated to go from 32 to 64 like me, here is your answer.
By the way. I'm using Windows 7 64-bit with iTunes 64-bit and it works without problems and syncing with my iPod Touch also works flawlessly.

Install windows 10 64 bit on windows 7 professional 32 bit.

Hi. If I install the last build of windows 10 64 bit over windows 7 32 bit (formatting and not making the windows 7 to windows 10 update with windows update) then I'll have windows 10 for free or not? Thanks.

Hi，
This?
Quote:
We announced that a free upgrade for Windows 10 will be made available to customers running Windows 7, Windows 8.1, and Windows Phone 8.1 who upgrade in the first year after launch.*
http://blogs.windows.com/bloggingwindows/2015/01/21/the-next-generation-of-windows-windows-10/
Yolanda Zhu
TechNet Community Support

Itunes 64 bit on windows 7 is unable to install, i have the 64 bit installer version but it keeps saying "errors occurred" at the ( rolling back ) phase. HELP!

itunes 64 bit on windows 7 is unable to install, i have the 64 bit installer version but it keeps saying "errors occurred" at the ( rolling back ) phase. HELP!!!

I have the answer and this might be useful for any one else wondering about this in the future. If it helped you or explained what you wanted to know. Replay to the post pls
It's quite easy actually. First have your "iTunes Library Extras", "iTunes Library Genius", "iTunes Library", and "iTunes Music Library" backed up. Download ans install iTunes 64-bit. I don't know what's so 64-bit about iTunes 64 since Win7 reports it as a 32-bit application in the task manager. But anyway. Install iTunes 64 and launch it. If you migrated your library to another drive like me go to settings in iTunes and change the directory to your location. Close iTunes. Replace the newly created files with your backed up files. Launch iTunes. iTunes will load and then update your library and from there you are set to go! so basically it is just like a normal upgrade. But if you hesitated to go from 32 to 64 like me, here is your answer.
By the way. I'm using Windows 7 64-bit with iTunes 64-bit and it works without problems and syncing with my iPod Touch also works flawlessly.

11.1.2 64 bit on Windows 7

Hi,
Has anyone faced an issue where it says "IIS is not installed" when you try to install 11.1.2 64 bit on Windows 7 x64? IIS and WWWeb Services are fine as when I call http://localhost, I can see multilingual welcome screen of IIS7.
The problem occurs when the installer tries to install EPMA, HSF, FDM and HFM. Other components are installed and configured just fine.
Alp

This seems like another first release catastrophe then. It's very strange as me and my collegue sitting next to me installed Win 7 x64 to exactly same laptops, enabled IIS (with .net) using exactly the same options and started the installation from the same installation package! Voila! one installs everything without exception, the other fails in the parts I mentioned.
Despite these issues though, I must admit that the installation somehow feels so comfortable. Well, I wish I could have seen further then that, maybe tomorrow.
I will try John's configuration, let's see what's going to happen. Thanks guys.
Cheers,
Alp

I am using Lightroom 5.7, 64 bit with Windows 7 Professional. For no apparent reason, I now get an error message when I export a photo, say a raw image to a JPG. However, the exported image seems to be OK. But now I notice that my LR directory of folders

I am using Lightroom 5.7, 64 bit with Windows 7 Professional. For no apparent reason, I now get an error message when I export a photo, say a raw image to a JPG. However, the exported image seems to be OK. But now I notice that my LR directory of folders in Library view does not show images correctly: If there is a folder with sub-folder(s), the folder will indicate 0 images, but the sub-folders show the proper number of images. What happened and is there a fix? I tried uninstalling Lightroom and re-installing, but problem persists.
Here is a screen shot of the error message:
Message was edited by: Joseph Costanza, Jr.

See here for a solution.

32 bit ATI Windows 7 drivers for the tm2t?

Hi,
I'm trying to get my 32-bit (I need 32-bit because I have some other devices which only have 32-bit drivers) Windows 7 (fresh install) on my tm2t to work... but HP's "32-bit" Radeon drivers located here fail to install:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4062&lc=en&cc=us&dlc=en&sw_lang=&product=4121...
I've even tried the older version and it doesn't work as well. Strangely in the older version is a PDF document that seems to indicate that HP engineering has tested and delivered both the 64 and 32 bit versions...
Video Driver Release HP LUKE SG 1.0 M93
Packaging Version 8.672.4-091125a-092132C-HP
0OS Supported WIN7 32 & 64
Certification Status WHQLCERTIFIED
Significant file
(version)
ATIKMDAG.SYS
(8.01.01.973)
LIST OF FUNCTIONAL CHANGES and BUG FIXES (includes all OTS, EPR and ECR)
Packaging Version OTS/
EPR/
ECR/
others
Description
8.672.4-091125a
(BR No. – 092132)
N/A
N/A
N/A
• Updated to the latest base build 8.672.4 RC3.
• Intel Driver Version 8.15.10.1892.
• WHQL CERTIFIED
KEY KNOWN ISSUES OR MISSING FUNCTIONALITY
Issue Comments
SETUP ASIC IDs ATI Mobility Radeon HD 4550 (9555)
I've contacted support and they have tried to escalate this for me, but since then there hasn't been any updates since, so I thought I would try this channel as well. I'm hoping someone else from HP is reading this and will help me out.
BTW this isn't a new problem. I wished I had known it existed before and perhaps I would have avoided the tm2t and went for the X200t as has this other person (it seems he gave up on HP and returned the tm2t... so HP this is affecting your sales)...
http://forum.tabletpcreview.com/hp-touchsmart-tm2-wacom/31065-32-bit-windows-7-ati-driver.html
howard.

Hi,
For those who are in the same boat as me (and having NO follow up support from HP ) Here is a tip, download and install the most recent 32 bit Vista/Win7 ATI Mobility drivers. This current version does (finally!) have the support for the Radeon HD 4550 (9555). Here's the link:
https://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/mobile/10-7_mobility_vista_win7_32_dd_cc...
However this is just a partial fix. The switchable graphics does not work since this is the generic driver set from ATI. If anyone has a clue on how to hack/install the required stuff in please post here! Otherwise we'll need to wait on HP to provide this. HELLO HP?!

Weblogic 64 bit on windows

Similar Messages

Maybe you are looking for