WebLogic 7 and IIS 5.0

I am setting up Weblogic configuring it to use IIS. This is the error I recieve when trying to connect Error: Message from the ISAPI plugin:
No backend server available for connection: timed out after 20 seconds.

Your question was already answered Re: Session.getAttribute gets Null in Servlet. Locking.

Similar Messages

WebLogic 8.1SP4 and IIS

Hi,
I want to configure weblogic with IIS and have found enough articles on how to proxy IIS to point to a single instance or a clustered environment but not on how to proxy IIS to multiple WebLogic servers
I have the application running on
http://<weblogic-server>:7201/elms
http://<weblogic-server>:7301/elms
http://<weblogic-server>:7401/elms
and I want to be able to access these via the IIS through these URLs:
http://<IIS_Server>/elms
http://<IIS_Server>/elms_sit
http://<IIS_Server>/elms_uat
Is this configuration possible? Any help would be highly appreciated.
Thanks
Sandeep

Since you are attempting to proxy by path you need to configure the iisforward.dll as stated in step #3 here:
http://e-docs.bea.com/wls/docs81/plugins/isapi.html#100382

SSL between WebLogic 10.0 and IIS 6.0 does'nt work

Hi,
I don't understand why the SSL connection between WL10.0 and IIS 6.0 doesn't work. My ini file is below:
WebLogicHost=10.0.162.31
WebLogicPort=7002
ConnectTimeoutSecs=20
ConnectRetrySecs=2
WlForwardPath=/weblogic
PathTrim=/weblogic
Debug=ON
SecureProxy=ON
TrustedCAFile=C:\trustedca.pem
EnforceBasicConstraints=off
RequireSSLHostMatch=false
where 'trustedca.pem' is the pem extracted (and converted) from wlsdemoca contained into DemoTrust.jks and '7002' is my ssl listen port.
I need to set any more parameter??
My wlpsoxy.log for one request is:
================New Request: [crl4/.wlforward] =================
Thu Apr 17 10:27:32 2008 <351612084388524> SSL is not being used
Thu Apr 17 10:27:32 2008 <351612084388524> resolveRequest: wlforward: /crl4/
Thu Apr 17 10:27:32 2008 <351612084388524> URI is /crl4/, len=6
Thu Apr 17 10:27:32 2008 <351612084388524> Request URI = [crl4/]
Thu Apr 17 10:27:32 2008 <351612084388524> attempt #0 out of a max of 10
Thu Apr 17 10:27:32 2008 <351612084388524> Trying a pooled connection for '10.0.162.31/7001/7001'
Thu Apr 17 10:27:32 2008 <351612084388524> getPooledConn: No more connections in the pool for Host[10.0.162.31] Port[7001] SecurePort[7001]
Thu Apr 17 10:27:32 2008 <351612084388524> general list: trying connect to '10.0.162.31'/7001/7001 at line 1239 for '/crl4/'
Thu Apr 17 10:27:32 2008 <351612084388524> INFO: New NON-SSL URL
Thu Apr 17 10:27:32 2008 <351612084388524> Connect returns -1, and error no set to 10035, msg 'Unknown error'
Thu Apr 17 10:27:32 2008 <351612084388524> EINPROGRESS in connect() - selecting
Thu Apr 17 10:27:32 2008 <351612084388524> Local Port of the socket is 1476
Thu Apr 17 10:27:32 2008 <351612084388524> Remote Host 10.0.162.31 Remote Port 7001
Thu Apr 17 10:27:32 2008 <351612084388524> general list: created a new connection to '10.0.162.31'/7001 for '/crl4/', Local port: 1476
Thu Apr 17 10:27:32 2008 <351612084388524> WLS info in sendRequest: 10.0.162.31:7001 recycled? 0
Thu Apr 17 10:27:32 2008 <351612084388524> URL::parseHeaders: CompleteStatusLine set to [HTTP/1.1 200 OK]
Thu Apr 17 10:27:32 2008 <351612084388524> URL::parseHeaders: StatusLine set to [200 OK]
Thu Apr 17 10:27:32 2008 <351612084388524> parsed all headers OK
Thu Apr 17 10:27:32 2008 <351612084388524> sendResponse() : uref->getStatus() = '200'
Thu Apr 17 10:27:32 2008 <351612084388524> Going to send headers to the client. Status :200 OK
Thu Apr 17 10:27:32 2008 <351612084388524> Content Length = 264
Thu Apr 17 10:27:32 2008 <351612084388524> canRecycle: conn=1 status=200 isKA=1 clen=264 isCTE=0
Thu Apr 17 10:27:32 2008 <351612084388524> closeConn: pooling for '10.0.162.31/7001'
Thu Apr 17 10:27:32 2008 <351612084388524> request [crl4/] processed successfully ..................
Thu Apr 17 10:27:57 2008 <351612084387971> timed out 1 connections, idle for (at least) 25 secs
Any idea that help me?

I had a look into the xlclient.cmd file and went to the JAVA directory which is being used. And did a search for the "cacerts" and found out that there is a file named cacerts in the JAVA_HOME/jre/lib/security folder over there.
But how does that relate to the problem of running the keytool command successfully at the right place (OIM_DC_HOME) ?
Any hints Kevin....
Thanks,
- oidm.

Weblogic 8.0 and IIS 5.0 plug in issue

hi,
I have a computer with Windows 2000 server and IIS 5.0 installed.
I am trying to open a connection with a Weblogic Server 8 SP3 on another machine.
My iisproxy.dll and iisproxy.ini
are on the folder: C:\WINNT\system32\inetsrv
iisproxy.ini :
WlForwardPath=/IhmActivation
Debug=ALL
WebLogicHost=toto
WebLogicPort=49162
WLLogFile=C:\iisproxy3.log
I have configured iisproxy.dll in IIS 5.0
Based on what I entered in my configuration file iisproxy.ini, if I type the URL:
http://localhost/IhmActivation/here.do
it should point to
http://toto:49162/IhmActivation/here.do
I get a 401 message:
Going to send headers to the client. Status :401 Unauthorized xxx
The login and password are ok.
So I do not know where the problem comes from.
Does anyone have an idea please ?
Thanks for your help.

Since you are attempting to proxy by path you need to configure the iisforward.dll as stated in step #3 here:
http://e-docs.bea.com/wls/docs81/plugins/isapi.html#100382

Secure Communication between Weblogic 5.1 and IIS

I have WL5.1 and IIS running on two separate machines. I've installed
SSL certificates on IIS. So the traffic between the browser and IIS is
encrypted.
When the "iisforward" filter is used to forward servlet execute to
Weblogic I get a message on the browser which says "You're about to be
redirected to a connection which is not secure. The information you're
sending to the current site might be retransmitted to a non-secure site. Do
you wish to continue?"
This makes sense as IIS does not know where the filter is forwarding this
data. But how do I get rid of that message? There does not seem to be a way
in 5.1 for the plugin/filter on IIS to communicate securely over SSL to the
Weblogic server.
Thanks,
- Ayush

Can you give more details on how you configured credentials on jboss end.
post this on jboss forumn as the solution lies in jboss configuration not that of wls.

Apache, Weblogic and Windows NT

The documentation for WL6b2 states that Apache and IIS are preferred web servers for WL6. I see an IIS proxy dll in the documentation but I can't find anything about configuring WL6 to work with Apache on NT. What am I missing?
Thanks,
Brian Ketelsen
Geneva Pharmaceuticals

Answered this one myself by looking at Apache mod_proxy documents. For those who care, use Mod_Proxy in Apache by setting a ProxyPass and ProxyPassReverse statement to forward weblogic traffic to the weblogic instance and port on the same machine.
Brian Ketelsen
Geneva Pharmaceuticals.
"Brian Ketelsen" <[email protected]> wrote:
>
The documentation for WL6b2 states that Apache and IIS are preferred web servers for WL6. I see an IIS proxy dll in the documentation but I can't find anything about configuring WL6 to work with Apache on NT. What am I missing?
Thanks,
Brian Ketelsen
Geneva Pharmaceuticals

WL 5.1 and IIS

Hi,
          I have a problem connecting to a WL-Server with an ASP within IIS. This
          is the test.asp-file:
          <%@ Language=VBScript %>
          <html>
               <head>
                    <title>Example 1</title>
               </head>
               <body>
                    <%
                         Dim server
                         Set server = GetObject("java:weblogic.com.Server")
                    %>
                    <%=FirstVar%>
               </body>
          </html>
          I have started WL under SDK. On the IIS-server, I have included the
          WL-pathes into the classpath and the trusted classpath (jview
          weblogic.com.Export ...). But when I call test.asp from a browser the
          error message
          ==========
          error '800401e5'
          No object for moniker
          /magicsshd/test.asp, line 14
          ==========
          occurs. Can anybody help me accessing Weblogic from IIS?
          Thanks a lot,
               Andreas Bunge


Thr problem is that you must set Execute rights to the IIS web at the
Configuration settings (exactly as seen in the documentation).
"Davide Bruzzone" <[email protected]> ha scritto nel messaggio
news:8iubob$mgp$[email protected]..
I'm trying to hook IIS up to the evaluation version of WebLogic Server 5.1
that I installed...
I followed the instructions that I found on the Installing theMicrosoft-IIS
(proxy) plug-in page. I then copied HelloWorld.jsp into the
d:\weblogic\myserver\public_html directory, and tried to bring it up in a
browser by typing in localhost/HelloWorld.jsp. At this point, I got the
following error:
** Begin error message **
HTTP Error 403
403.1 Forbidden: Execute Access Forbidden
This error can be caused if you try to execute a CGI, ISAPI, or other
executable program from a directory that does not allow programs to be
executed.
Please contact the Web server's administrator if the problem persists.
** End error message **
I then tried adding a virtual directory called public_html to my defaultWeb
site. This didn't help. I even tried creating a directory calledpublic_html
inside public_html, setting execute privilages on it, and putting a copyof
HelloWorld.jsp in there. This allowed me to type
localhost/public_html/HelloWorld.jsp into my browser, and to see the JSP
source code!?#...
This is what my iisproxy.ini file looks like (It lives in d:\weblogic):
** Begin iisproxy.ini **
# This file contains initialization name/value pairs
# for the IIS/WebLogic plug-in.
WebLogicHost=localhost
WebLogicPort=7001
WebLogicCluster=
ConnectTimeoutSecs=20
ConnectRetrySecs=2
** End iisproxy.ini **
Any suggestions/help from someone who's done this before would be greatly
appreciated. We can't run/evaluate the product before we can crawl andwalk.
>
Cheers...
Dave Bruzzone
WebCredenza, Inc.
[isapi2.gif]

What is difference between Weblogic and OSB

Hi,
The title says it all.
What is the difference between Oracle WebLogic and Oracle Service Bus?
Assuming both products are part of the Oracle strategy, when would I use each product?
I am really struggling as I cannot find a link with this information.
Many thanks
Jason

Jason,
Weblogic is application server. Service Bus is a product which runs on top of Weblogic.
You can find plenty information about both products on the web.
Regards,
Milan

Java SSO and IIS

This is a repeat of this post: Java SSO and IIS
Noone answered there.
Hello,
my organization uses Java SSO authentication in Oracle Application Server. Now we want to "expand" SSO so that our IIS applications can benefit from Oracle SSO and user needn't print user name / password again. Is there any way to use Java SSO in IIS? In this project we use Java SSO, not Oracle Identity Management.
Thanks in advance

Hi ,
I was installed and configured policy agent successfully.while i am trying to access the application url i am getting following error.
I am using IIS6.0 and access manager 7.1.
Error 2824:15b9918 AuthService: AuthService::processLoginStatus() Exception message=[Application user ID is not valid.] errorCode='107' templateName=login_failed_template.jsp.
2009-03-10 00:03:05.828 Error 2824:15b9918 PolicyEngine: am_policy_evaluate: InternalException in AuthService::processLoginStatus() with error message:Exception message=[Application user ID is not valid.] errorCode='107' templateName=login_failed_template.jsp and code:3
2009-03-10 00:03:05.828 Warning 2824:15b9918 PolicyAgent: am_web_is_access_allowed()(http://fcs-ylwkuzfoz1q.ramesh.com:99/website.html, GET) denying access: status = Access Manager authentication service failure
2009-03-10 00:03:05.828 Debug 2824:15b9918 PolicyAgent: am_web_is_access_allowed(): Successfully logged to remote server for GET action by user unknown user to resource http://fcs-ylwkuzfoz1q.ramesh.com:99/website.html.
2009-03-10 00:03:05.828 Info 2824:15b9918 PolicyAgent: am_web_is_access_allowed()(http://fcs-ylwkuzfoz1q.ramesh.com:99/website.html, GET) returning status: Access Manager authentication service failure.
2009-03-10 00:03:05.828 Debug 2824:15b9918 PolicyAgent: HttpExtensionProc(): status after am_web_is_access_allowed = Access Manager authentication service failure (3)
2009-03-10 00:03:05.828 Error 2824:15b9918 PolicyAgent: HttpExtensionProc(): status: Access Manager authentication service failure (3)
2009-03-10 00:03:05.828 Debug 2824:15b9918 PolicyAgent: OnSendResponse(): HTTP Status code is 500
can any one please help me to resolve this.
Thanks
Ramesh Kumar GV

Server crashes running CFMX7 and IIS

The sequence of events is that the server runs fine....for a
short while, then either CF services or all the Web services become
unavailalbe. Sometimes the whole machine goes down, and must be
rebooted. Sometimes if the machine does not go down, restarting CF
services or the Web services IIS solves the issue and the site
becomes available againl.
There are no server logs pointing to any hardware or Windows
operating system system problems. Running Windows 2003 Server and
IIS 6 with CFMX7.
Sometimes when the server goes down, I get a Jrun connection
error. But I really think that the server is just getting
overloaded with these erroneous 404 errors that are showing up
every couple of minutes/seconds in the application log.
These are 404 errors for pages that have been off the Website
for years, in some cases. It feels like a Web crawler is going
through the site looking for old erroneous pages and not finding
them.
I have built a completely new server, and now have twice the
hard-drive space and twice the RAM, but it is beginning to crash
just like the previous server. And the application log is filling
up, just like the prevous server.
We have re-assigned IP addresses, so this new server now has
the same IP address that the old one had, and even though it has a
new name, all references to the old name are being forwarded to the
new server....So our problem has followed us to the new machine.
Iiiiiiiieeeeeee. I am in the twlight zone, and can't get out.
Does anyone have any idea how I can tell where these 404 errors
might be coming from? How do I get a referrer on a log file error?
Or any other ideas at all. I am at my wits end, and if I
don't solve this problem am in serious trouble here. WCW

Willow315 wrote:
> The sequence of events is that the server runs
fine....for a short while, then
> either CF services or all the Web services become
unavailalbe. Sometimes the
> whole machine goes down, and must be rebooted.
Goes down? Do you mean 100% CPU and unresponsive or do you
mean it
completely locks up and doesn't even answer pings anymore?
> Sometimes when the server goes down, I get a Jrun
connection error. But I
> really think that the server is just getting overloaded
with these erroneous
> 404 errors that are showing up every couple of
minutes/seconds in the
> application log.
What is the first error you see in your *-out.log? Is JRun
maximizing
the allocated RAM when it goes down?
> Iiiiiiiieeeeeee. I am in the twlight zone, and can't get
out. Does anyone have
> any idea how I can tell where these 404 errors might be
coming from? How do I
> get a referrer on a log file error?
In your IIS logging settings, enable referrer logging. And
you might
check if there is a "Check that file exists" checkbox in IIS
where you
mapped the .cfm extension to CF.
Jochem
Jochem van Dieten
Adobe Community Expert for ColdFusion

IE11 Problem with Windows 8.1 and IIS 8.5

I have upgraded my computer from Windows 8 to Windows 8.1, 64bit and IIS 8.5 is installed on the upgraded machine. I am unable to view with IE11 the default page of the default website hosted on the local machine. The problem occurs with both
the desktop version of IE11 and the Windows 8 metro style version.
When Chrome is installed on the machine the page is visible but when using IE11 a "This page can't be displayed" message appears. The IIS Log Files reveal that it is receiving nothing from IE11. Other machines I have that have also been upgraded
to Windows 8.1 exhibit the same fault.
The strange thing is that when viewing pages on other networked machines exhibiting the same problem, you can see the pages on the remote machines but in all instances the local page cannot be viewed.
It appears that there is a problem with IE11. Uninstalling and reinstalling IE11 does not fix the problem.
Can anyone help me? Assitance with this problem would be most appreciated.

Description
<dir>
</dir><dir></dir><dir></dir><dir>
Faulting Application Path: C:\Program Files (x86)\Internet Explorer\iexplore.exe
</dir>
Problem signature
<dir>
</dir><dir></dir><dir></dir><dir>
Problem Event Name: APPCRASH
Application Name: IEXPLORE.EXE
Application Version: 11.0.9600.16384
Application Timestamp: 52157231
Fault Module Name: MSHTML.dll
Fault Module Version: 11.0.9600.16432
Fault Module Timestamp: 52620354
Exception Code: c0000005
Exception Offset: 002964a7
OS Version: 6.3.9600.2.0.0.256.48
Locale ID: 2057
Additional Information 1: ab90
Additional Information 2: ab9026eb5cad8b25f882a373e2d752b2
Additional Information 3: d486
Additional Information 4: d48664e52db6f0b0676e13c96e422192
</dir>
Extra information about the problem
<dir>
</dir><dir></dir><dir></dir><dir>
Bucket ID: 45b7b98d077be82c89ec9142c2213a5f (-374769956)
</dir>

Crystal 8 Web Component Server ond Windows Server 2003 and IIS 6

I am trying to get Crystal 8 Web Component and Page Server to run on Windows 2003 Server with IIS 6. I have done the following:
Added the .cri and .rpt ISAPI extension mappings
Have Cache ISAPI extentions selected
Deselected "verify that file exists"
Aded the .cri and .rpt MIME types
Added wcsinsapi.dll as a IIS 6.0 extension
The above resolved all HTTP 40x.x errors but when trying to access a report from IE I receive the following error:
Error: Could not connect to the Web Component Server.
The page server and web component server services are running and I do see the listen ports (6401, 6403) active.
I know this is old software but it works quite well under a Windows 2000 Server and other web postings indicate that it is possible to run Crystal 8 under WS2003 and IIS 6.
Does any one know of a white paper/support document that details how to run Crystal 8 under Windows Server 2003 and IIS 6?
Has any one done this successfully?
Any tips as to cause of the "Could Not Connect" problem would be greatly appreciated.

Well as it turns out it looks like it was just this server.
We tried everything, and I added those user accounts to full
permission for the Coldfusion folders and we just could not get it
to work. We tried it on another couple servers running 2003, and it
installed perfectly right out of the box with no other permissions
needed. And those servers were all running default configs with no
other permissions done.
We still have no idea what was the problem, but at least for
now it seems to be this server. But I will tell you what, that II6
stuff seems to be a bit of a pain, we had major problems installing
new version of PHP with it too. Oh well, good luck to you
too!

Problems Installing ColdFusion 9 (64 bit) on Windows 7 and IIS 7.5

Problem: Empty response for static Files including images, CSS and js files. The response code is 200 OK, but there is no actual response (it's empty).
The ColdFusion Administration web site works correctly except it's not displaying any images, css and js. Why it is serving up dynamic content and not static is a mystery.
Installed ColdFusion 9 (64 bit) Multiserver Option on Windows 7 running IIS 7.5.
I have verified that IIS 7.5 is correctly configured for Static Content for both the handler mappings and the modules.
The Configuration for IIS 7.5 install looks like this:
The ColdFusion web configuration tools shows that it is connected to all instances of IIS.
I have uninstalled ColdFusion9 and IIS 7.5, and reinstalled many times but get the same problem: Empty responses for Static Files.
Help is appreciated.

To Clarify the blurry picture, this is what the IIS 7.5 install options look like:
Web Mgmt Tools > II6 Mgmt Compatility > IIS Metabase & II6 Compatability
WWW Services > Application Dev Features > .Net Extensibility and ASP.Net and CGI and ISAPI Extensions & ISAPI Filters
Common HTTP Features > Default Document and Directory Browsing and HTTP Errors and Static Content
Security > Request Filtering

Do I need to set system env variables for weblogic and SOA server installation?

Hi All,
   I already have two weblogic application servers on my machine(that were installed by others).
I observed some environment variables were also set in System variables(ORACLE_HOME,WEB_SERVER_HOME etc) section in Env variables section(Start Menu---> Computer --> properties ---).But why do we need to have system environment variables wherein we already have those variables in files like setDomainEnv.bat or/and setSOADoaminEnv.bat for each server.
And one more thing system variables will be applicable for all servers(the whole machine) right.It may spoil the installation of new servers and present servers as variables should be unique to each server.
    I want to install weblogic and SOA server installation.
So Can I remove the existing system variables(as they will applicable for every server) and install weblogic and SOA server installation without setting up the environment variables?
Especially I have multiple Weblogic servers,In that case how it would be to have environment variables(JAVA_HOME,WL_HOME,ORACLE_HOME etc)?
Please guide me on this to installl SOA suite .
Thanks in advance

Hi All,
   I already have two weblogic application servers on my machine(that were installed by others).
I observed some environment variables were also set in System variables(ORACLE_HOME,WEB_SERVER_HOME etc) section in Env variables section(Start Menu---> Computer --> properties ---).But why do we need to have system environment variables wherein we already have those variables in files like setDomainEnv.bat or/and setSOADoaminEnv.bat for each server.
And one more thing system variables will be applicable for all servers(the whole machine) right.It may spoil the installation of new servers and present servers as variables should be unique to each server.
    I want to install weblogic and SOA server installation.
So Can I remove the existing system variables(as they will applicable for every server) and install weblogic and SOA server installation without setting up the environment variables?
Especially I have multiple Weblogic servers,In that case how it would be to have environment variables(JAVA_HOME,WL_HOME,ORACLE_HOME etc)?
Please guide me on this to installl SOA suite .
Thanks in advance

NOT WORKING - Tomcat 4.0.5 and IIS 5

I'm trying to set up Tomcat to work with IIS 5 on windows 2000 server.
I got everything working fine locally. I deployed my app and it's working fine on localhost:8080. Now I want to be able to see it from the outside and some files that I try to view from my domain come up with the actual source code.
I ran with several tutorials that keep saying "Hey, you did it...it's was so easy wasn't it?" and they don't say anything when it all goes wrong. No one goes the extra step to help out when these easy instructions do nothing. I'm looking at this for far too long now and I'm losing my mind slowly.
I have IIS running and restarted it with jakarta virtual directory that has a green arrow up. But localhost doesn't find the pages. So I'm not sure what could be wrong.
I'm having a lot of trouble with the workers.properties file. If anyone could help me with that it would be great. The uriworkmap seems to be quite simple, and goes the same way as the web.xml server uri-mapping. But I'm not sure what could be wrong.
I also tried to get tomcat to service jsp files and IIS everything else, but still nothing.
Thanks in advance,
Lior

Well, something was wrong with my configurations of the registry amongst other things. Now I have everything in place and I played with the workers.prop file. However, it still doesn't work. I get the following in the isapi_redirect.log file:
[Tue Oct 15 12:11:00 2002] [jk_isapi_plugin.c (806)]: Using registry.
[Tue Oct 15 12:11:00 2002] [jk_isapi_plugin.c (808)]: Using log file C:\tomcat\logs\iis_redirect.log.
[Tue Oct 15 12:11:00 2002] [jk_isapi_plugin.c (809)]: Using log level 0.
[Tue Oct 15 12:11:00 2002] [jk_isapi_plugin.c (810)]: Using extension uri /jakarta/isapi_redirect.dll.
[Tue Oct 15 12:11:00 2002] [jk_isapi_plugin.c (811)]: Using worker file C:\tomcat\conf\workers.properties.
[Tue Oct 15 12:11:00 2002] [jk_isapi_plugin.c (812)]: Using worker mount file C:\tomcat\conf\uriworkermap.properties.
[Tue Oct 15 12:11:00 2002] [jk_uri_worker_map.c (159)]: Into jk_uri_worker_map_t::uri_worker_map_alloc
[Tue Oct 15 12:11:00 2002] [jk_uri_worker_map.c (199)]: Into jk_uri_worker_map_t::uri_worker_map_open
[Tue Oct 15 12:11:00 2002] [jk_uri_worker_map.c (217)]: jk_uri_worker_map_t::uri_worker_map_open, rule map size is 5
[Tue Oct 15 12:11:00 2002] [jk_uri_worker_map.c (262)]: Into jk_uri_worker_map_t::uri_worker_map_open, suffix rule /.jsp=ajp13 was added
[Tue Oct 15 12:11:00 2002] [jk_uri_worker_map.c (262)]: Into jk_uri_worker_map_t::uri_worker_map_open, suffix rule /refcoapp/.jsp=ajp13 was added
[Tue Oct 15 12:11:00 2002] [jk_uri_worker_map.c (262)]: Into jk_uri_worker_map_t::uri_worker_map_open, suffix rule /examples/.jsp=ajp13 was added
[Tue Oct 15 12:11:00 2002] [jk_uri_worker_map.c (273)]: Into jk_uri_worker_map_t::uri_worker_map_open, match rule /examples/servlet/=ajp13 was added
[Tue Oct 15 12:11:00 2002] [jk_uri_worker_map.c (302)]: Into jk_uri_worker_map_t::uri_worker_map_open, there are 4 rules
[Tue Oct 15 12:11:00 2002] [jk_uri_worker_map.c (324)]: jk_uri_worker_map_t::uri_worker_map_open, done
[Tue Oct 15 12:11:00 2002] [jk_worker.c (82)]: Into wc_open
[Tue Oct 15 12:11:00 2002] [jk_worker.c (207)]: Into build_worker_map, creating 1 workers
[Tue Oct 15 12:11:00 2002] [jk_worker.c (213)]: build_worker_map, creating worker ajp12
[Tue Oct 15 12:11:00 2002] [jk_worker.c (138)]: Into wc_create_worker
[Tue Oct 15 12:11:00 2002] [jk_worker.c (152)]: wc_create_worker, about to create instance ajp12 of ajp12
[Tue Oct 15 12:11:00 2002] [jk_ajp12_worker.c (264)]: Into ajp12_worker_factory
[Tue Oct 15 12:11:00 2002] [jk_worker.c (161)]: wc_create_worker, about to validate and init ajp12
[Tue Oct 15 12:11:00 2002] [jk_ajp12_worker.c (182)]: Into jk_worker_t::validate
[Tue Oct 15 12:11:00 2002] [jk_ajp12_worker.c (194)]: In jk_worker_t::validate for worker ajp12 contact is localhost:8007
[Tue Oct 15 12:11:00 2002] [jk_worker.c (177)]: wc_create_worker, done
[Tue Oct 15 12:11:00 2002] [jk_worker.c (223)]: build_worker_map, removing old ajp12 worker
[Tue Oct 15 12:11:00 2002] [jk_worker.c (235)]: build_worker_map, done
[Tue Oct 15 12:11:00 2002] [jk_worker.c (102)]: wc_open, done
[Tue Oct 15 12:11:23 2002] [jk_isapi_plugin.c (555)]: HttpFilterProc started
[Tue Oct 15 12:11:23 2002] [jk_isapi_plugin.c (600)]: In HttpFilterProc Virtual Host redirection of /localhost/examples/jsp/num/numguess.jsp
[Tue Oct 15 12:11:23 2002] [jk_uri_worker_map.c (351)]: Into jk_uri_worker_map_t::map_uri_to_worker
[Tue Oct 15 12:11:23 2002] [jk_uri_worker_map.c (368)]: Attempting to map URI '/localhost/examples/jsp/num/numguess.jsp'
[Tue Oct 15 12:11:23 2002] [jk_uri_worker_map.c (416)]: jk_uri_worker_map_t::map_uri_to_worker, Found a suffix match ajp13 -> *.jsp
[Tue Oct 15 12:11:23 2002] [jk_isapi_plugin.c (617)]: HttpFilterProc [examples/jsp/num/numguess.jsp] is a servlet url - should redirect to ajp13
[Tue Oct 15 12:11:23 2002] [jk_isapi_plugin.c (639)]: HttpFilterProc check if [examples/jsp/num/numguess.jsp] is points to the web-inf directory
[Tue Oct 15 12:11:23 2002] [jk_isapi_plugin.c (679)]: HttpExtensionProc started
[Tue Oct 15 12:11:23 2002] [jk_worker.c (123)]: Into wc_get_worker_for_name ajp13
[Tue Oct 15 12:11:23 2002] [jk_worker.c (127)]: wc_get_worker_for_name, done did not found a worker
[Tue Oct 15 12:11:23 2002] [jk_isapi_plugin.c (701)]: HttpExtensionProc could not get a worker for name ajp13
[Tue Oct 15 12:11:23 2002] [jk_isapi_plugin.c (722)]: HttpExtensionProc error, could not get a worker for name ajp13
I have no idea why it cannot get the worker. This is the prop file I have:
workers.tomcat_home=c:\tomcat
workers.java_home=c:\jdk1.3.1_04
ps=\
worker.list = ajp13
worker.ajp13.type = ajp13
worker.ajp13.host = localhost
worker.ajp13.port = 8009
Thanks.

WebLogic and Maven in 5 minutes

Hi guys, I wrote a short tutorial on how to develop a JEE5 application with Maven that deploys on WebLogic with split-deploy, for fast develop/deploy/fix/redeploy cycles:
http://www.lucamasini.net/Home/java-enterprise/weblogic-and-maven-in-5-minutes
Hope can be useful for someone.
Ciao.
L.
Edited by: Luca Masini on Jun 5, 2011 8:52 PM

thanks Luca, very appreciated.

WebLogic 7 and IIS 5.0

Similar Messages

Maybe you are looking for