WEBLOGIC 700 server Installation step

hello sir please give me steps to install weblogic 700 server

hello sir please give me steps to install weblogic 700 server

Similar Messages

  • Afaria Server Installation Steps

    Hello ,
    I have downloaded few files from SAP Service market place , but dont know what are the steps need to take care for Proper and smooth installation .
    Files information are below :
    1) 51042956.zip
    2) Afaria70001_0-21010386.zip
    3) Afaria70002_0-21010386.zip
    4) Afaria70003_0-21010386.zip
    5) Afaria70004_0-21010386.zip
    Can you please provide me info to install above files ?
    and also if its possible then provide me some links then i can refer .
    Thanks & Regards ,
        Kunal Varaiya

    You can also find installation guides in service market place
    Login to ServiceMarketPlace--> softwares and downloads-->Installation and Upgrades--> Installation and Upgrade GUides -->SAP Mobile --> Afaria --> choose the service pack you downloaded --> here you can find the installation guides
    This might also help you --> check in Setting up Afaria Environment Column from below document
    Afaria - Architect & Admin
    How-To Guide: Afaria Technical Prerequisites for iOS, Android and Blackberry

  • OIM multiple server installation steps doc

    Hi All,
    I have installed OIM 9.1.0 with jboss 4.0.3 SP1 its working fine. Now I want to install OIM in multiple servers. If any one having step-by-step document for installing OIM in multiple server please share me the step Or any doc.
    Thanks in advance.
    Sincerely
    vyas

    You can setup database clusters (RAC). You can setup a cluster for the application server. You can deploy just the xlWebApp (front end) to servers, and have the xlScheduler on others. You can also host the JMS servers on different nodes of the cluster.
    OIM is not Novell, so it will work different. See the clustering documentation with the JBOSS documentation.
    -Kevin

  • Get stuck in Installation step due to language change in the OTN

    Hi Friends
    I am following the crystal train Instructions to setup Development Environment for BPEL
    these are the steps given in that
    Step1 : Oracle Database 10g Instructions
    Step 2 : Repository Creation Utility
    Step 3 : Oracle Weblogic Server 10.3.3
    Step 4 : Oracle SOA Suite 11.1.1.2.0
    Step 5 : Upgrade to Oracle SOA Suite 11.1.1.3.0
    Step 6 : Domain Creation
    Step 7 : Verification of Admin Server Installation
    Step 8 : Verification of SOA Server Installation
    Step 9 : Verification of BAM Server Installation
    Step 10 : JDeveloper Installation
    Step 11 : SOA Extension for JDeveloper Installation
    Step 12 : Oracle Service Bus 11g Installation
    Step 13 : Extension of Weblogic Domain With OSB
    Step 14 : Verification of OSB Server Installation
    Step 15 : SOAP UI
    Step 16 : JMS Adapter
    Step 17 : DB Adapter
    Step 18 : BAM Adapter
    I have completed until step 11
    But in the
    Step 12 : Oracle Service Bus 11g Installation
    As per the document step
    I want to download oracle service bus(11.1.1.3.0)
    This will get downloaded as ofm_osb_generic_11.1.1.3.0_disk1_1of1.zip
    But in my case i went to that link but i cannot find oracle service bus(11.1.1.3.0).so i put the requirement in the searh region ..but i find this software oracle service bus(11.1.1.3.0) In chinese and japanese language ... please help to get download this software and to complete my installation process
    Thanks in Advance
    Ur help ll be appriciable
    Thiliban

    Hi Friends
    where ever i go i am getting pointed to download Oracle Service Bus 11g (11.1.1.4.0)
    if i down load "Oracle Service Bus 11g (11.1.1.4.0)" ll it affects my installtion process because i have done every thing based on the document ...
    more over i have installed This sofwware in my system
    Repository Creation Utility (11.1.1.3.3)
    Oracle Weblogic Server 10.3.3
    Oracle SOA Suite 11.1.1.3.0
    oracle Jdeveloper 11g(11.1.1.3.0)
    If i install "Oracle Service Bus 11g (11.1.1.4.0)" ll it affect my process??? (or )ll It support the process??
    I have downloded the "Oracle Service Bus 11g (11.1.1.4.0)" .when i try to install
    it just asked for
    Welcome=> next
    step 2 install software update => i clicked skip software updates =>next
    step3 installation location => i got
    Oracle Middleware home => c:\Oracle \Middleware\
    Oracle HOme Directory : Oracle_OSB1
    when i click next=>i get error message
    (INST-07286 :specified oracle Middleware home location does not have version 10.3.4.0 of weblogic server .if the version iscorrect then configuring with the weblogic server will fail)
    so i tried this one
    Oracle Middleware home => c:\Oracle \Middleware\wlserver_10.3
    Oracle HOme Directory : Oracle_OSB1
    =>next
    I get INST -07248 specified middleware home location is not a valid location
    PLEASE HELP ME I STRUGGLING A LOT TO INSTALL THIS SOFTWARE PLEASE
    Thanks In advance
    your help will be appreciable
    Thiliban
    Edited by: Newbie on Jan 31, 2011 4:29 AM

  • WebLogic as Web Server Installation using WebLogic Express

    Hi all,
    I am in a process of installing WebLogic Web server. I downloaded WebLogic Express from bea site, and it turns out to be the same bin file that I had used for WebLogic Server installation. During the installation, I did not come across an specific steps meant for WebLogic Express (which is a web server + servlet/jsp container)
    Can some one please guide me at the earlier as regards installation steps for WebLogic Web Server,
    Regards,

    Jim,
    I am trying to set up WLS 9.1 and got this error.
    Could you help me with this? Why I am getting it?
    Thanks!
    Marvin
    ####<Jan 16, 2008 10:54:13 PM EST> <Error> <HTTP> <netwave8888> <MedRecServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1200542053359> <BEA-101359> <The servlet weblogic.servlet.AsyncInitServlet init method failed while it was run in the background. The exception was: java.lang.ExceptionInInitializerError.
    java.lang.ExceptionInInitializerError
         at java.lang.Class.forName(Ljava.lang.String;ZLjava.lang.ClassLoader;)Ljava.lang.Class;(Unknown Source)
         at weblogic.servlet.AsyncInitServlet.createDelegate(AsyncInitServlet.java:43)
         at weblogic.servlet.AsyncInitServlet.initDelegate(AsyncInitServlet.java:92)
         at weblogic.servlet.internal.WebAppServletContext$AsyncInitRequest.run(WebAppServletContext.java:1641)
         at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:179)
    org.apache.commons.logging.LogConfigurationException: java.lang.reflect.InvocationTargetException
         at org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactoryImpl.java:532)
         at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:272)
         at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:246)
         at org.apache.commons.logging.LogFactory.getLog(LogFactory.java:395)
         at org.apache.struts.action.ActionServlet.<clinit>(ActionServlet.java:375)
         at java.lang.Class.forName(Ljava.lang.String;ZLjava.lang.ClassLoader;)Ljava.lang.Class;(Unknown Source)
         at weblogic.servlet.AsyncInitServlet.createDelegate(AsyncInitServlet.java:43)
         at weblogic.servlet.AsyncInitServlet.initDelegate(AsyncInitServlet.java:92)
         at weblogic.servlet.internal.WebAppServletContext$AsyncInitRequest.run(WebAppServletContext.java:1641)
         at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:179)
    java.lang.reflect.InvocationTargetException
         at jrockit.reflect.NativeConstructorInvoker.newInstance([Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
         at java.lang.reflect.Constructor.newInstance([Ljava.lang.Object;I)Ljava.lang.Object;(Unknown Source)
         at org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactoryImpl.java:525)
         at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:272)
         at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:246)
         at org.apache.commons.logging.LogFactory.getLog(LogFactory.java:395)
         at org.apache.struts.action.ActionServlet.<clinit>(ActionServlet.java:375)
         at java.lang.Class.forName(Ljava.lang.String;ZLjava.lang.ClassLoader;)Ljava.lang.Class;(Unknown Source)
         at weblogic.servlet.AsyncInitServlet.createDelegate(AsyncInitServlet.java:43)
         at weblogic.servlet.AsyncInitServlet.initDelegate(AsyncInitServlet.java:92)
         at weblogic.servlet.internal.WebAppServletContext$AsyncInitRequest.run(WebAppServletContext.java:1641)
         at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:179)
    java.lang.NoClassDefFoundError: org/apache/log4j/LogManager
         at org.apache.log4j.Category.getInstance(Category.java:514)
         at org.apache.commons.logging.impl.Log4JCategoryLog.<init>(Log4JCategoryLog.java:104)
         at jrockit.reflect.NativeConstructorInvoker.newInstance([Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
         at java.lang.reflect.Constructor.newInstance([Ljava.lang.Object;I)Ljava.lang.Object;(Unknown Source)
         at org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactoryImpl.java:525)
         at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:272)
         at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:246)
         at org.apache.commons.logging.LogFactory.getLog(LogFactory.java:395)
         at org.apache.struts.action.ActionServlet.<clinit>(ActionServlet.java:375)
         at java.lang.Class.forName(Ljava.lang.String;ZLjava.lang.ClassLoader;)Ljava.lang.Class;(Unknown Source)
         at weblogic.servlet.AsyncInitServlet.createDelegate(AsyncInitServlet.java:43)
         at weblogic.servlet.AsyncInitServlet.initDelegate(AsyncInitServlet.java:92)
         at weblogic.servlet.internal.WebAppServletContext$AsyncInitRequest.run(WebAppServletContext.java:1641)
         at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:179)
    >
    ####<Jan 16, 2008 10:54:13 PM EST> <Info> <Management> <netwave8888> <MedRecServer> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1200542053609> <BEA-141052> <The auto deployment poller has started.>

  • Weblogic server installation in red hat linux 5

    hi i am new to the weblogic server i am trying to install weblogic server in redhat linux i downloaded .bin file from oracle
    i enter these commands
    chmod +x  wls1035_oepe111172_linux32.bin
    ./wls1035_oepe111172_linux32.bin
    The directory "/tmp" does not have enough space for extraction.
    Please input another directory or [Exit]: Exit
    i got the error message
    please reply i will appreciate your hep

    Steps for preparing the installation can be found here: http://download.oracle.com/docs/cd/E17904_01/doc.1111/e14142/prepare.htm#i1183981
    To run the installation steps presented here can be followed: http://download.oracle.com/docs/cd/E17904_01/doc.1111/e14142/guimode.htm#i1082009

  • Start multiple domains simultaneously on 1 Weblogic server installation?

    Is it okay to start and run multiple domains simultaneously. Better yet, when having multiple domains on 1 WLS server, should each domain have a different port number in order to be run simultaneously?
    Here's my scenario - I installed Oracle Business Intellgence, which by default installs and configures WLS server for certain Business Intelligence applications (BI Publisher). This instance was running fine and good and still is.
    Then I had another application, Oracle Data Integrator, which has a Console piece that requires a domain on WLS. So instead of modifying the existing domain for Oracle Business Intelligence, I created a new domain via the Configuration Wizard and selected those components for Oracle Data Integrator.
    therefore current domains:
    ...\domains\bifoundation_domain --> installed automatically as part of Oracle Business Intelligence
    ...\domains\odi11g --> I created this domain after I
    Now I have 2 domains under 1 WLS Server (windows 7 64bit), but if I startWeblogic.cmd for the bifoundation_domain, and I startWeblogic.cmd for the odi11g...then only the components for the bifoundation_domain become available via the WLS Console.
    Questions:
    - Can I run both domains simultaneously?
    - Should I have modified the bifoundation_domain to include Oracle Data Integrator component; therefore only having 1 domain but having everything run under that domain?
    - Does the Port for each domain matter? both bifounddation_domain and odi11g domain use ports 7001
    Are there any other considerations? Thanks much.

    Hi,
    It is perfectly OK to run multiple domains on a single Weblogic server installation. Only constraint would be you have enough capacity available on your server to start multiple instances.
    Things to note is, if your domain1 is running on listen address : port { localhost : 7001 } then your other domain should be configured on a different port say {localhost : 8001 }. If you want both domain to run on same port then go for virtual IP's to be plumbed on your physical network interface and configure as,
    domain1 - { ip1 : 7001 }
    domain2 - { ip2 : 7001 }
    this way you will can access both domain admin console on same port.
    Remember, Weblogic resources cannot be shared between domain, however a single nodemanager will be enough to monitor both the domains.
    * rank it if answer is helpful :) *
    Thanks,
    Ranjan

  • Fatal Error during Installation of Weblogic Application Server 11g (10.3.4)

    Hi,
    I have installed Weblogic server 10.3.4 in the first attempt but when I was deploying an ear, Server gets crashed (JDK was crashed) and after that I was unable to start the server because it was giving an error for JDK.
    Then I uninstalled existing Weblogic server and tried installing server (same version using same setup) once again but it is not allowing. It is asking me for directory (WLS Home Directory), Complete/Custom and when installing finally, it is flagging an error (when 39% installation is complete) "Fatal Error encountered during file installation, the installer will now cleanup and exit! C:\<Home Directory>\wlserver_10.3\common\bin\consol.exe (Access is denied)".
    Can any one please help me in resolving this error. Thanks in advance
    Regards,
    Priya

    Hello,
    You need to check the permissions on the middleware home directory.  Give permissions and then try to install weblogic server, it will work. 
    Are you trying to do first time weblogic server installations.  If you have already domain created then from there also you can create a seperate domain
    Regards

  • Do I need to set  system env variables for weblogic and SOA server installation?

    Hi All,
       I already have two weblogic application servers on my machine(that were installed by others).
    I observed some environment variables were also set in System variables(ORACLE_HOME,WEB_SERVER_HOME etc) section in Env variables section(Start Menu---> Computer --> properties ---).But why do we need to have system environment variables wherein we already have those variables in files like setDomainEnv.bat or/and setSOADoaminEnv.bat for each server.
    And one more thing system variables will be applicable for all servers(the whole machine) right.It may spoil the installation of new servers and present servers as variables should be unique to each server.
        I want to install weblogic and SOA server installation.
    So Can I remove the existing system variables(as they will applicable for every server) and install weblogic and SOA server installation without setting up the environment variables?
    Especially I have multiple Weblogic servers,In that case how it would be to have environment variables(JAVA_HOME,WL_HOME,ORACLE_HOME etc)?
    Please guide me on this to installl SOA suite .
    Thanks in advance

    Hi All,
       I already have two weblogic application servers on my machine(that were installed by others).
    I observed some environment variables were also set in System variables(ORACLE_HOME,WEB_SERVER_HOME etc) section in Env variables section(Start Menu---> Computer --> properties ---).But why do we need to have system environment variables wherein we already have those variables in files like setDomainEnv.bat or/and setSOADoaminEnv.bat for each server.
    And one more thing system variables will be applicable for all servers(the whole machine) right.It may spoil the installation of new servers and present servers as variables should be unique to each server.
        I want to install weblogic and SOA server installation.
    So Can I remove the existing system variables(as they will applicable for every server) and install weblogic and SOA server installation without setting up the environment variables?
    Especially I have multiple Weblogic servers,In that case how it would be to have environment variables(JAVA_HOME,WL_HOME,ORACLE_HOME etc)?
    Please guide me on this to installl SOA suite .
    Thanks in advance

  • 64bit weblogic server installation on windows

    Hi,
    We are trying to install 64bit Oracle weblogic Server 10.3.2 on windows 2007 Server. As per the documentation, The installation requires 64bit java installation and then execute the wl_1032_server.jar file.
    We installed weblogic Server successfully and did not find any errors while installing the weblogic server. We created one Managed Server with the default options. We are able to start the Admin Server with out any problems.
    But we are unable to start the managed weblogic server and we are getting the following error message while starting the managed webserver.
    I have also tried with setting the following memory args also. But I am getting the same error in the managedserver log files.
    set MEM_ARGS=-Xms512m -Mmx1024m -MaxPermSize=512m
    <Feb 19, 2010 11:57:01 PM EST> <Notice> <WebLogicServer> <BEA-000330> <Started WebLogic Managed Server "new_ManagedServer_1" for domain "base_domain" running in Production Mode>
    Exception in thread "[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
    The WebLogic Server encountered a critical failure
    Reason: PermGen space
    Exception in thread "main" java.lang.OutOfMemoryError: PermGen space
    <Feb 19, 2010 11:57:10 PM> <FINEST> <NodeManager> <Waiting for the process to die: 1848>
    Can you please help us in configuring the 64bit weblogic server. Do we need to make any special configurations.
    Thanks and Regards,
    S R Prasad

    Thanks,
    You are right and I've found a documentation below. Did you checked your Environment Variables or try to use full path of 64 bit Java installation?
    How do I select between 32 and 64-bit operation? What's the default? The options -d32 and -d64 have been added to the Java launcher to specify whether the program is to be run in a 32 or 64-bit environment. On Solaris these correspond to the ILP32 and LP64 data models, respectively. Since Solaris has both a 32 and 64-bit J2SE implementation contained within the same installation of Java, you can specify either version. If neither -d32 nor -d64 is specified, the default is to run in a 32-bit environment.
    Other Java commands (javac, javadoc, etc.) will rarely need to be executed in a 64-bit environment. However, the -d32/-d64 options may be passed to these commands and then on to the Java launcher using the established -J prefix option (eg: -J-d64).
    All other platforms (Windows and Linux) contain separate 32 and 64-bit installation packages. If both packages are installed on a system, you select one or the other by adding the appropriate "bin" directory to your path. For consistency, the Java implementations on Linux accept the -d64 option.
    Regards,
    Kadir

  • Which Weblogic server installation do I need??

    I need to download and install Oracle 11g Portal, Forms, Reports and Discoverer (11.1.1.2.0) for Windows 7 Professional. On its main page, Oracle says that I have to download and install Weblogic Server before I can install Forms 11g. When I go to Weblogic Server download page, I see two versions: The package installer (815 MB), and the net installer (40 MB). Which one of them do I need for my purpose? Also, do I need something else (other than the database ofcourse and the Weblogic Server) to download and install before putting Forms 11g?
    Thanks

    When I go to Weblogic Server download page, I see two versions: The package installer (815 MB), and the net installer (40 MB)?
    Both Installer will do the same thing....You can choose any one of them
    *"Package Installer":* It's Size will be always much more than the Net-Installer....If you want to Once download the Installer in your PC and then want to run it in separate Boxes again & Again where u may not have Internet connectivity ...then you need to choose "Package Installer". When you run the Package installer, you can also select the specific product components you want to install, thereby also enabling you to minimize the installation footprint.
    Downloading the Package installer is recommended if you want to perform multiple WebLogic Server installations at your site. In a typical scenario, you download the Package installer only once, then make it available to each machine on which you wish to have the product installed. (You can run the installer from each machine directly over the local network, or copy the installer onto each machine and run it.)
    *"Net Installer":* If you want to install the WebLogic and donot want the Installer keeo with you for future use...This is good. It has 40 MB size ...because this 40MB installer will start Downloading rest of the part of the complete installer from the Oracle N/W on the fly. Unlike the Net installer, the Package installer does not provide for any reduction in download time or the amount of disk space required for the installation files.
    Thanks
    Jay SenSharma
    http://jaysensharma.wordpress.com (WebLogic Wonders Are Here)

  • WebLogic Server installation Crashing with a fatal error - SIGSEGV

    Hello WLS Gurus,
    I am in the process of installing Discoverer 11 and I am facing problems with launching wls1036_generic.jar installer.
    I have installed installed Java 7 as follows:
    cd /u02/appldisc/11.1.1/Middleware
    tar -xvzf jdk-7u25-linux-x64.tar.gz
    JAVA_HOME=/u02/appldisc/11.1.1/Middleware/jdk1.7.0_25
    I then excuted:
    $JAVA_HOME/bin/java -Xmx1024m -jar wls1036_generic.jar
    and the installer crashed with this error output:
    # A fatal error has been detected by the Java Runtime Environment:
    #  SIGSEGV (0xb) at pc=0x0000003b09e14d70, pid=28328, tid=139864618293008
    # JRE version: 7.0_25-b15
    # Java VM: Java HotSpot(TM) 64-Bit Server VM (23.25-b01 mixed mode linux-amd64 compressed oops)
    # Problematic frame:
    # C  [ld-linux-x86-64.so.2+0x14d70]
    # Failed to write core dump. Core dumps have been disabled. To enable core dumping, try "ulimit -c unlimited" before starting Java again
    # If you would like to submit a bug report, please visit:
    #   http://bugreport.sun.com/bugreport/crash.jsp
    # The crash happened outside the Java Virtual Machine in native code.
    # See problematic frame for where to report the bug.
    ---------------  T H R E A D  ---------------
    Current thread (0x00007f34d03b9000):  JavaThread "AWT-EventQueue-0" [_thread_in_native, id=28346, stack(0x00007f34c4d3d000,0x00007f34c4e3e000)]
    siginfo:si_signo=SIGSEGV: si_errno=0, si_code=128 (), si_addr=0x0000000000000000
    Registers:
    RAX=0x0000000000000001, RBX=0x00007f34d02bea50, RCX=0x000000009e982203, RDX=0x000000001fabfbff
    RSP=0x00007f34c4e39ab8, RBP=0x00007f34c4e39c00, RSI=0x0000000000000000, RDI=0x0000000000000058
    Can someone help?
    Thanks
    Mathias

    See
    “Generic WebLogic Server Installer generates a Crash immediately after opening GUI on ld-linux-x86-64.so.2 Library (Doc ID 1570688.1)” which states that
    “ This is an issue with AVX support appearing on newer hardware. Default glibc is incompatible with it. This problem happens due to a Red Hat Bug: Segmentation fault in dynamic loader on AVX enabled CPU “
    Solution:
    1. Set the following Environment Property on your active Shell.
      - open a bash terminal and type in:
    $ export LD_BIND_NOW=1
    2. Re-Run the installer as bellow example.
      $JAVA_HOME/bin ./java -jar wls1036_generic.jar
    Mathias

  • SAP installation steps by steps notes of 4.7 on WIN2003 Server

    Hi All,
    I need the installation steps of SAP IDES 4.7 on windows 2003 server with screen shots.
    I have one more doubt.
    I have installed WINDOWS XP MEDIA CENTRE.
    Is it possible to install 4.7 on this?
    Is so then how?
    I have 120GB HDD and 1GB RAM.
    Is it fine to install 4.7 or should i upgrade?
    If there is any notes with screen shots please me at [email protected]
    Thanks in advance.

    Please follow the below process:
    System Configuration -
    P-IV - 2.4 Ghz with 1 GB RAM
    HDD - 160 GB,
    Partion's C: 10 GB, D & E - 50 GB, F - 40GB
    1. Install OS (Windows 2003 Advanced Server)
    Computer/Hostname Name - india
    after OS, Install Lookback Adapter with IP 192.168.1.1/24
    Check Optimsation Setting in File and Printer Sharing
    of Network Adapter
    Make following entry in host file (system32\drivers\etc\hosts)
    192.168.1.1 india SAPTRANSHOST
    2. Install winzip
    3. Install Sun java SDK 2 - 1.4.2_3 in default location (c:\j2sdk1.4.2_03)
    make following entries in the environment variables. under both
    administrator and system variables
    JAVA_HOME C:\j2sdk1.4.2_03
    PATH %JAVA_HOME%\bin;%PATH%
    4. Increase the SIze of Virtual Memory to 3 GB.
    5. Install Ntpatch from F:\SAPINST\NT\I386\NTPATCH\R3DLLINS.EXE
    6. Install Oracle from F:\RDBMS1\NT\I386\sapserver.cmd
    Database Name - Orahome92 and Path - d:\oracle\ora92
    Select not to create database.
    click in the checkbox Net configuration Assistant select - perform using typical configurations
    make following entries in the environment variables. under both
    administrator and system variables
    CLASSPATH D:\oracle\ora92\jdbc\lib\classes12.jar;%CLASSPATH%
    7. Patch Installation of Oracle ( 9.2.0.2.1)
    Stop the following services
    OracleOraHome92Agent - D:\oracle\ora92\bin\agntsrvc.exe
    OracleServiceV11 - d:\oracle\ora92\bin\ORACLE.EXE V11
    Install the Oracle Patch from F:\RDBMS3\NT\I386\patches\9.2.0.2.1\setup.exe
    8. Install SAP by clicking on F:\SAPINST\SAPINST\NT\SETUP.CMD
    Select to Install Central Instance
    SAP System ID - V11
    Instance No. - 00
    11. Now click on run SAPinst ORACLE SAPINST - Prepare New Installation
    12. Now click on run SAPinst ORACLE SAPINST - SAPinst Server with GUI select
    select to install Database Instance
    Select The drive for SAPsearch, SAPBackup, SAPcheck, SAPTrace - d:\
    Drive for redolog - e:\
    SAPdata drives
    sapdata1 d:\ size 8.52 gb
    sapdata2 e:\ size 10.7 gb
    sapdata3 d:\ size 10.35 gb
    sapdata4 e:\ size 12.00 gb
    log file are created in -
    OriglogA d:\
    mirrlogA e:\
    OriglogB d:\
    mirrlogB e:\
    MNLS not installed
    13. Database instance will take the longest time approx 150 Minutes
    following process take the longest to install
    Database tablespaces
    Database Load - r3load jobs
    Updating Database Statistics
    14. Install the SAP GUI
    15. Start the SAP R3 System by right clicking on SID and selecting All Task then Start
    16. Login into the client 000 using username SAP* and run the following transcations.
    SICK - installation check
    SE06 - Post Installation Activity
    STMS - Transport Management SYstem
    17. Login into client 001
    -using userid SAP* and change the password
    -using userid DDIC and change the password
    18. Login into client 066
    -using userid EARLYWATCH and change the password
    I sent this to your mail Id also.
    Please reward if helpful.

  • Weblogic Administrator Server won't start after a fresh WCC install

    Hi guys, i followed this [install documentation|http://docs.oracle.com/cd/E23943_01/doc.1111/e14538/qiecm.htm#sthref8] to install wls and WCC on a OEL6 (64bit), all went relatively smoothly. Then when I get ready to start weblogic admin server for the first time, it errors out on me.
    system:
    -Oracle Enterprise Linux6 (64bit)
    -WebLogic Server 12.1.1
    -Webcenter Content 11g
    -Oracle DB 11g
    basic steps I've took:
    1) RCU installed UCM, URM, IPM, and IBR schemas into 11g DB
    2) installed wls, created a basic domain (base_domain) with Admin Server as a place holder
    3) installed WCC, create new domain (wcc_domain) with Admin Server
    4) start wls Admin Server: $WCC_DOMAIN_HOME/bin/startWebLogic.sh
    5) error.......
    [high level error msg]
    Feb 12, 2013 10:27:07 PM oracle.security.jps.internal.keystore.file.FileKeyStoreManager openKeyStore
    WARNING: Opening of file based keystore failed.
    <Feb 12, 2013 10:27:07 PM CST> <Error> <Security> <BEA-090892> <The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-06514: Opening of file based keystore failed.>
    <Feb 12, 2013 10:27:07 PM CST> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-06514: Opening of file based keystore failed.
    weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-06514: Opening of file based keystore failed.
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1402)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1022)
         at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
         at weblogic.security.SecurityService.start(SecurityService.java:148)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         Truncated. see log file for complete stacktrace
    Caused By: oracle.security.jps.JpsRuntimeException: JPS-06514: Opening of file based keystore failed.
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:167)
         at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:369)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
         Truncated. see log file for complete stacktrace
    Caused By: oracle.security.jps.JpsException: JPS-06514: Opening of file based keystore failed.
         at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPDPService(PolicyUtil.java:2855)
         at oracle.security.jps.internal.policystore.PolicyUtil.getPDPService(PolicyUtil.java:3099)
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:164)
         at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:369)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         Truncated. see log file for complete stacktrace
    Caused By: oracle.security.jps.service.keystore.KeyStoreServiceException: JPS-06514: Opening of file based keystore failed.
         at oracle.security.jps.internal.keystore.file.FileKeyStoreManager.openKeyStore(FileKeyStoreManager.java:374)
         at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.doInit(FileKeyStoreServiceImpl.java:105)
         at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:77)
         at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:67)
         at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:157)
         Truncated. see log file for complete stacktrace
    [high level error msg]
    steps I've took to tackle this problem:
    1) removed $WCC_DOMAIN/security folder, then re-enter username/password
    <result> can't find SerializedSystemIni.dat file
    2) create a boot.properties file in folder
    <result> same keystore error as above
    3) re-generate a new SerializedSystemIni.dat file [described here|http://www.wikiconsole.com/wiki/?p=3041]
    <result> same keystore error as above
    4) tried modify cwallet.sso [described here|https://forums.oracle.com/forums/thread.jspa?threadID=2266436]
    <result> can't modify, content in sso file is encrtyped
    5) review message with debug option enabled
    <result> it said error from LDAP [described here|http://docs.oracle.com/cd/E17904_01/core.1111/e10043/aptrouble.htm] but I don't have LDAP enabled/installed
    6) create a key store based on WCC install doc (IRM section)
    <result> same keystore error as above
    none of the steps above work, only option left I can think of, is maybe install it with wls 10.3 (seems like that's what the installation doc used). I honestly hope it could be as simple as that, but if I'm missing anything critical, please let me know.
    Thank you
    p.s: please feel free to ask me to post the long lengthy debug output

    Hi ,
    First and foremost I am not sure why you have used WLS 12c to be installed for WCC environment . That is currently a non-supported configuration .
    Secondly you are starting the admin server from <domain_home>/bin ? If yes , then go up the directory and start it from <domain_home> itself .
    Check if that works .
    Thanks,
    Srinath

  • OIM problem with weblogic administration server (configuring OIM)

    Hi,
    I have this software installed:
    - Oracle database 11gR2 (schemas made with RCU)
    - SOA Suite generic 11.1.1.2.0
    - Repository Creation Utility
    - Weblogic Server 1034
    - JDK 1.6.0_24
    - IAM_generic 11.1.1.1.3.0 (OIM)
    when I'm configuring the oracle identity management 11.1.1.3.0 and I'm in the weblogic administration server screen I write in the fields:
    url administration server : t3://localhost:7001
    Username: weblogic
    Password: ****** (correct)
    when it tries to connect to weblogic I get an error that says:
    INST-6180: It has not been possible to get the URL server managed by the OIM domain // (spanish translation of the error)
    then if look at the weblogic standard output (and in the admin server log) I see the following error
    ####<23-feb-2011 21H04' CET> <Warning> <RMI> <WIN-5GJP37O0LUL> <AdminServer> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1298491447915> <BEA-080003> <RuntimeException thrown by rmi server: javax.management.remote.rmi.RMIConnectionImpl.getAttribute(Ljavax.management.ObjectName;Ljava.lang.String;Ljavax.security.auth.Subject;)
    java.lang.NullPointerException.
    java.lang.NullPointerException
         at java.util.concurrent.ConcurrentHashMap.get(ConcurrentHashMap.java:768)
         at weblogic.management.mbeanservers.internal.JMXContextInterceptor.getMBeanContextLoader(JMXContextInterceptor.java:475)
         at weblogic.management.mbeanservers.internal.JMXContextInterceptor.getAttribute(JMXContextInterceptor.java:146)
         at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$12.run(WLSMBeanServerInterceptorBase.java:326)
         at java.security.AccessController.doPrivileged(Native Method)
         at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.getAttribute(WLSMBeanServerInterceptorBase.java:324)
         at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$12.run(WLSMBeanServerInterceptorBase.java:326)
         at java.security.AccessController.doPrivileged(Native Method)
         at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.getAttribute(WLSMBeanServerInterceptorBase.java:324)
         at weblogic.management.mbeanservers.internal.SecurityInterceptor.getAttribute(SecurityInterceptor.java:299)
         at weblogic.management.jmx.mbeanserver.WLSMBeanServer.getAttribute(WLSMBeanServer.java:279)
         at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder$5$1.run(JMXConnectorSubjectForwarder.java:326)
         at java.security.AccessController.doPrivileged(Native Method)
         at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder$5.run(JMXConnectorSubjectForwarder.java:324)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
         at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder.getAttribute(JMXConnectorSubjectForwarder.java:319)
         at javax.management.remote.rmi.RMIConnectionImpl.doOperation(RMIConnectionImpl.java:1404)
         at javax.management.remote.rmi.RMIConnectionImpl.access$200(RMIConnectionImpl.java:72)
         at javax.management.remote.rmi.RMIConnectionImpl$PrivilegedOperation.run(RMIConnectionImpl.java:1265)
         at java.security.AccessController.doPrivileged(Native Method)
         at javax.management.remote.rmi.RMIConnectionImpl.doPrivilegedOperation(RMIConnectionImpl.java:1367)
         at javax.management.remote.rmi.RMIConnectionImpl.getAttribute(RMIConnectionImpl.java:600)
         at javax.management.remote.rmi.RMIConnectionImpl_WLSkel.invoke(Unknown Source)
         at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:667)
         at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:522)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
         at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:518)
         at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
    Thanks for your time

    As mentioned earlier in this thread please use 10.3.3 weblogic .
    I have created 8 post step by step installation series for OIM/OAM/OAAM/OAPM inclding SOA here http://onlineappsdba.com/index.php/2010/08/05/oracleidm-11g-step-by-installation-of-oam-oim-oaam-oapm-oin-111130-part-i-load-schema/
    IDAM 11g certification matrix is at http://www.oracle.com/technetwork/middleware/id-mgmt/identity-accessmgmt-11gr1certmatrix-161244.xls
    Atul Kumar
    - Book "OAM/OIM 11g for Administrators" -> http://onlineappsdba.com/index.php/2011/02/23/my-book-oracle-identity-access-manager-11g-for-administrators-is-now-available-in-raw-format/
    Edited by: onlineAppsDBA.com on May 15, 2011 2:15 PM

Maybe you are looking for

  • Problem with totaling amounts in a loop

    Hello, I am having trouble with some code I am writing in that I cannot get my totals to continuously add inside my loop and print out to the screen. I have gotten this far, and I am attempting to use JOptionPane which is something I am unfamiliar wi

  • BPM Application: Task access related issue

    Hi Gurus, I have one secure (using ADF security) Application(Simple ADF Application), which will write data in XML format into a JMS Queue.After login to application,user can use that functionality. Then that message is fetched by one BPM Application

  • Direct Path Reads instead of Sequential Reads for index range scan

    Database is 11.2. I have two development schemas, with the same table loaded in each schema - a 5 million row table. The execution path for the sql statement is the same against both tables; it's doing an index range scan. But it would appear Oracle

  • Blocking calls

    Any program for blocking unwanted calls pls.

  • Array in Properties File

    I thought I could make a properties file that looked like this: my.array.values=blah my.array.values=blah blah my.array.values=oh blahbady blah...then I can get the properties out as an array. Did I just imaging that or something? How would I get an