Weblogic 8.0 configuration for JSTL
Hi all!
Can anybody please guide me how to configure Weblogic 8.0 for web development using JSTL ?
thanks for any sort of support!
I have installation doc. for weblogic 8.0 SP4
If you need it send a mail to
[email protected]
Regards,
Rengaraj.RWhat does this have to do with using JSTL? You don't need installation docs for that. If anybody wants them, they can go to BEA to get them.
%
Similar Messages
-
Multiple Apache-Weblogic plug-in configurations for the same host
Hi BEA,
I have a situation where I have more than one weblogic server/cluster both using
the same Apache to proxy. Reading the Apache plug-in configuration I gather that
below should work. In Apache (httpd.conf):
<Location /path1>
SetHandler weblogic-handler
WeblogicHost app1
WeblogicPort 7001
</Location>
<Location /path2>
SetHandler weblogic-handler
WeblogicHost app2
WeblogicPort 7001
</Location>
In this case the later Location of the two works fine and the other seems like
it is just not there. (If the two are switched the other works fine...) The thing
is that, if possible, I would like to avoid splitting the two locations onto two
different VirtualHosts (which works).
Does anyone have any ideas on how to solve this and still avoid the use of multiple
VirtualHost-definitions?
Is it due to a limitation in Apache module architecture that the configuration
above does not work or is it a design choice in the plug-in?
//GG
Gunnar,
I would post this Apache proxy plug in question to the
weblogic.developer.interest.plug-in forum
Chuck Nelson
DRE
BEA Technical Support
-
Weblogic 10.3 configuration for serving static content
When we deploy Web Application the default document root of application will be its own root directory. If we want to have all the xml files on the disk to be in different location other than our deployment directory you can use virtual directory mapping in our Applications deployment descriptors. Below is the information on virtual directory mapping.
virtual-directory-mapping
=============================================================================
Use the virtual-directory-mapping element to specify document roots other than the default document root of the Web application for certain kinds of requests, such as image requests. All images for a set of Web applications can be stored in a single location, and need not be copied to the document root of each Web application that uses them. For an incoming request, if a virtual directory has been specified servlet container will search for the requested resource first in the virtual directory and then in the Web application’s original document root. This defines the precedence if the same document exists in both places.
Example:
<virtual-directory-mapping>
<local-path>c:/usr/gifs</local-path>
<url-pattern>/images/*</url-pattern>
<url-pattern>*.jpg</url-pattern>
</virtual-directory-mapping>
<virtual-directory-mapping>
<local-path>c:/usr/common_jsps.jar</local-path>
<url-pattern>*.jsp</url-pattern>
</virtual-directory-mapping>
Below edocs link has more information virtual directory mapping.
http://e-docs.bea.com/wls/docs103/webapp/weblogic_xml.html#wp1039396
- - TarunHi,
I have a web application deployed to one of the managed server nodes.
I need to access web application using the url http://<host>:<port>/webApp/
I dont want to use that way.
I need to access the welcome file directly without using the web application name like the one below.
http://<host>:<port>/welcome.jsp
I have read about virtual-directory-mapping and I have ran the examples which comes with weblogic installation.
I have changed the weblogic.xml that comes with my application as follows
<?xml version="1.0"?>
<!DOCTYPE weblogic-web-app PUBLIC "-//BEA Systems, Inc.//DTD Web Application 8.1//EN" "http://www.bea.com/servers/wls810/dtd/weblogic810-web-jar.dtd">
<weblogic-web-app>
<virtual-directory-mapping>
<local-path>G:/Test</local-path>
<url-pattern>/*.html</url-pattern>
<url-pattern>/index.jsp</url-pattern>
</virtual-directory-mapping>
</weblogic-web-app>
I have pasted fast_track.html and index.jsp to g:/Test folder.
After i restart the managed server, am still getting" 404 Page not found" error.
Kindly help.
Thanks,
Charan
Edited by: charan27 on Sep 2, 2010 8:11 AM -
How can I list all the domains configured for Weblogic Servers?
How can I list all the domains configured for Weblogic Servers?
I saw a note, which says the following:
"WebLogic Server does not support multi-domain interaction using either the Administration Console, the weblogic.Admin utility, or WebLogic Ant tasks. This restriction does not, however, explicitly preclude a user written Java application from accessing multiple domains simultaneously."
In my case, I just want to list all the domains, is that possible by using any scripts?
Thanks
AJIf you use WLS Node Manager and the Config Wizard was used to create the domains, then the list of domains should be in a location like this:
<MIDDLEWARE_HOME>\wlserver_10.3\common\nodemanager\nodemanager.domains
Enterprise Manager Grid Control also has support for multi-domain management of WLS in a console. -
Weblogic 8.1 (SP4) configuration for console log
Weblogic version: 8.1 SP4
By default in console (cmd window) log, date and time format is as below.e.g
<Jul 11, 2008 12:22:35 PM IST>
I need to see time in millisecond. Is there any configuration for this?
please help.Assuming the log entries you care about are generated by your application, and not the infrastructure, you're better off adding millisecond detail to your application log messages. If you're using commons-logging, you can tie this to the WL server log implicitly through configuration, or you could use NonCatalogLogger to explicitly log to the WL server log.
-
How to do Apache configuration for two different domains
Hi ,
I was just trying out some clustering workshop on weblogic. I faced a issue..here is the scenario :
I have two clusters :
Cluster1 : 3 managed servers (server1,server2,server3)
Cluster2 : 2managed servers (server4,server5)
I have two sample applications which i have deployed on these two clusters i.e app1 on cluster1 and app2 on cluster2.
These two aplications are deployed successsfully as i am able to open these applicatons from browser by calling the individual port of the managed server like : http://localhost:7003/app1.
Now i have installed a apache server on my laptop and configured the http.conf file.
Issue : I am not able to call both the application from apache. If there is only one cluster then it is working fine and for two application only one cluster (application) is working that too whose port is defined in the last.
Here are the contents of my httpd.conf file :
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do not begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "C:/Program Files/Apache Software Foundation/Apache2.2" will be interpreted by the
# server as "C:/Program Files/Apache Software Foundation/Apache2.2/logs/foo.log".
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which httpd.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths to avoid confusion.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
ServerRoot "C:/Program Files/Apache Software Foundation/Apache2.2"
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available before they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule authn_alias_module modules/mod_authn_alias.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
#LoadModule disk_cache_module modules/mod_disk_cache.so
#LoadModule dumpio_module modules/mod_dumpio.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule filter_module modules/mod_filter.so
#LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
#LoadModule ldap_module modules/mod_ldap.so
#LoadModule logio_module modules/mod_logio.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule status_module modules/mod_status.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule unique_id_module modules/mod_unique_id.so
#LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule version_module modules/mod_version.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule weblogic_module modules/mod_wl.so
*<IfModule mod_weblogic.c>*
WebLogicCluster 127.0.0.1:7005,127.0.0.1:7007,127.0.0.1:7003,127.0.0.1:7103,127.0.0.1:7104
MatchExpression /app1
*</IfModule>*
*<Location /weblogic>*
SetHandler weblogic-handler
WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007,127.0.0.1:7103,127.0.0.1:7104
DebugConfigInfo ON
PathTrim /weblogic
*</Location>*
*<IfModule mod_weblogic.c>*
WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007
MatchExpression /app2
*</IfModule>*
*<Location /weblogic>*
SetHandler weblogic-handler
WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007
DebugConfigInfo ON
PathTrim /weblogic
*</Location>*
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User daemon
Group daemon
</IfModule>
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin <adminurl>
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName <servername>
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "C:/Program Files/Apache Software Foundation/Apache2.2/htdocs"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "C:/Program Files/Apache Software Foundation/Apache2.2/htdocs">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named explicitly --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you do define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "logs/error.log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you do
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and not in this file.
CustomLog "logs/access.log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "logs/access.log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://<url>/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock logs/cgisock
</IfModule>
# "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402<url>/subscription_info.html
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#EnableMMAP off
#EnableSendfile off
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
#Include conf/extra/httpd-autoindex.conf
# Language settings
#Include conf/extra/httpd-languages.conf
# User home directories
#Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
#Include conf/extra/httpd-default.conf
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
So here for the above configuration only app2 i am able to call and for app1 its saying "404 page not found".
Can soomebody help me in cofiguring apache so that i can call both the applications.
Thanks,
Ankit>
<IfModule mod_weblogic.c>
WebLogicCluster 127.0.0.1:7005,127.0.0.1:7007,127.0.0.1:7003,127.0.0.1:7103,127.0.0.1:7104
MatchExpression /app1
</IfModule>
<Location /weblogic>
SetHandler weblogic-handler
WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007,127.0.0.1:7103,127.0.0.1:7104
DebugConfigInfo ON
PathTrim /weblogic
</Location>
<IfModule mod_weblogic.c>
WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007
MatchExpression /app2
</IfModule>
<Location /weblogic>
SetHandler weblogic-handler
WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007
DebugConfigInfo ON
PathTrim /weblogic
</Location>
>
This configuration is weird little bit. There is MatchExpression /app1 and MatchExpression /app2 and at the same time two <Location /weblogic> sections. Are you sure you understand what that configuration stands for?
Try something like this ...
<Location /app1>
SetHandler weblogic-handler
WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007,127.0.0.1:7103,127.0.0.1:7104
DebugConfigInfo ON
</Location>
<Location /app2>
SetHandler weblogic-handler
WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007
DebugConfigInfo ON
</Location>
where /app1 and /app2 are contexts of your weblogic applications.
http://download.oracle.com/docs/cd/E11035_01/wls100/plugins/apache.html
http://httpd.apache.org/docs/2.0/mod/core.html#location -
How to configure for remote JMS client?
I have my own Java JMS test program for performance measurements.
I am using the JNDI and JMS provider functionality of the WebLogic 9.1 app-server but my test program is just pure JMS 1.02 sender/receiver clients - ie it is NOT part of, or deployed as a J2EE application.
SINGLE MACHINE TEST
===================
In a single machine environment I was able to
- configure a JMSServer
- configure a JMSSystemModule
- configure resources for ConnectionFactories and Queue and Topics
I then made what I believe to be a 'standalone' application module copied from some mysystemmodule-jms.xml and with that I somehow worked out how to deploy it using the weblogic.Deployer tool.
The deployment apparently set up the JNDI and my JMS client could gain access to the administered objects and do what it does.
Everything works.
TWO MACHINE TEST
================
I now have a second machine.
I want to put my JMS sender client on this new machine and I want the JMS server and JMS receiver client to be unchanged from the SINGLE MACHINE TEST.
But I really don't know quite how to proceed from here...
Do I need to install the WebLogic app-server on the sender machine or is the weblogic.jar all I need?
What is necessary configuration for JNDI access on the sender machine?
Can I in fact use my original SINGLE MACHINE server unchanged as I am hoping?
I don't think I want a "thin" client because I read that performance is impacted (and these are performance tests)
Remember this is NOT a J2EE application. There is no MDB; no client-container; no descriptors etc. Maybe that makes it more complicated - I don't know.
Sorry for such basic questions but if somebody can just point me to an appropriate example or tutorial it could save me days...
Thankyou.Hi,
My problem is on similar lines. I have an applet based UI working on RMI/t3 protocol.
I am using weblogic 9.2 as my app server.
When my applet is executed on JRE 1.5x it works fine.
But when I use JRE1.4x it gives the following exception
java.lang.NoClassDefFoundError: javax/management/InvalidAttributeValueException
at weblogic.rmi.internal.Stub.<clinit>(Stub.java:21)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:141)
at weblogic.rmi.internal.StubInfo.class$(StubInfo.java:34)
at weblogic.rmi.internal.StubInfo.<clinit>(StubInfo.java:34)
at java.lang.Class.forName0(Native Method)
I have analyzed the reason for this.
the class javax/management/InvalidAttributeValueException was included in java 1.5 and above. So JRE 1.4 does not have it.
In previous versions of weblogic this class was a part of their 'weblogic.jar' file and in weblogic 9.2 it is not a part of weblogic.jar file so when I am using JRE1.4 and weblogic 9.2 then it obviously does not find this class hence the above exception.
I tried to put this all together and made custom made client jar file incliding the necessary classes. I was able to get throght this exception only land up in following exception.
java.lang.VerifyError: class weblogic.utils.classloaders.GenericClassLoader overrides final method .
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(Unknown Source)
at java.security.SecureClassLoader.defineClass(Unknown Source)
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
at weblogic.jndi.WLInitialContextFactoryDelegate.<clinit>(WLInitialContextFactoryDelegate.java:204)
at weblogic.jndi.spi.EnvironmentManager$DefaultFactoryMaker.<clinit>(EnvironmentManager.java:26)
at weblogic.jndi.spi.EnvironmentManager.getInstance(EnvironmentManager.java:48)
at weblogic.jndi.Environment.getContext(Environment.java:307)
at weblogic.jndi.Environment.getContext(Environment.java:277)
at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
at javax.naming.spi.NamingManager.getInitialContext(Unknown Source)
at javax.naming.InitialContext.getDefaultInitCtx(Unknown Source)
at javax.naming.InitialContext.init(Unknown Source)
at javax.naming.InitialContext.<init>(Unknown Source)
I really need to support clients using Jre 1.4 and Jre 1.5
I will really appreciate any help on this one.
Please advise.
Thank you all. -
Using weblogic as web server for Enterprise Manager can someone pls help?
hello,
can i have your help on this?
i want to use Weblogic as web server instead of apache in the structure of Enterprise Manager 10g R3?
have any of you try this? can someone please provide me some link related to how to configure Weblogic as web server for Enterprise Manager.
Many thanks in advance
Cheers,
CosminYou'll probably have better luck posting in the Enterprise Manager forum:
Enterprise Manager -
Using Weblogic as web server for Enterprise Manager 10g R3?
hello,
can i have your help on this?
i want to use Weblogic as web server instead of apache in the structure of Enterprise Manager 10g R3?
have any of you try this? can someone please provide me some link related to how to configure Weblogic as web server for Enterprise Manager.
Many thanks in advance
Cheers,
CosminIm dont think its possible to do this with enterpise manager (Dbcosole), It might be possible with GRID .. have a look here
http://www.oracle.com/technology/products/wag/index.html -
Help required in Weblogic 6 - Creation & Configuration of Web Application
Forum Home > Enterprise JavaBeans[tm]
Topic: Help required in Weblogic 6 - Creation & Configuration of Web Application
Duke Dollars
2 Duke Dollars assigned to this topic. Reward the best responses to your question
using the icons below, or transfer additional Duke Dollars to this topic.
Welcome moinshariff!
Watching this topic.
Previous Topic Next Topic
This topic has 1 reply on 1 page (Most recent message: Jan 23, 2002 1:05 AM)
Author: moinshariff Jan 22, 2002 4:55 AM
Hi,
I am using Weblogic 6. I have created a new Web
Application called Web (I have not used the DefaultWebApp_myserver).
And I have the following settings:
Name : Web
URI : Web
and Path : C:\Web
and placed my JSP files under c:\Web\
I am able to access the first page, but after that I am not able to access the
second page.
I get "Error 404--Not Found" on the browser. Basically the class file is not getting
created under /Web-inf/_tmp_war_myserver_myserver_Web/jsp_servlet/ folder .
I tried a work around for this. I copied all my files under one more folder called
web and placed this under C:\Web
The it works. Now I have 2 copied off all the files, 1 copy under c:\web and another
copy under c:\web\web\.
If I have the files under DefaultWebApp_myserver and have the setting as
Name: DefaultWebApp_myserver
URI: DefaultWebApp_myserver
Path: .\config\mydomain\applications
everything works fine.
Can any one please let me know if there is any configuration which has to be done
so that I do not duplicate the code in 2 directories
Thanks in advance.
Regards,
MoinForum Home > Enterprise JavaBeans[tm]
Topic: Help required in Weblogic 6 - Creation & Configuration of Web Application
Duke Dollars
2 Duke Dollars assigned to this topic. Reward the best responses to your question
using the icons below, or transfer additional Duke Dollars to this topic.
Welcome moinshariff!
Watching this topic.
Previous Topic Next Topic
This topic has 1 reply on 1 page (Most recent message: Jan 23, 2002 1:05 AM)
Author: moinshariff Jan 22, 2002 4:55 AM
Hi,
I am using Weblogic 6. I have created a new Web
Application called Web (I have not used the DefaultWebApp_myserver).
And I have the following settings:
Name : Web
URI : Web
and Path : C:\Web
and placed my JSP files under c:\Web\
I am able to access the first page, but after that I am not able to access the
second page.
I get "Error 404--Not Found" on the browser. Basically the class file is not getting
created under /Web-inf/_tmp_war_myserver_myserver_Web/jsp_servlet/ folder .
I tried a work around for this. I copied all my files under one more folder called
web and placed this under C:\Web
The it works. Now I have 2 copied off all the files, 1 copy under c:\web and another
copy under c:\web\web\.
If I have the files under DefaultWebApp_myserver and have the setting as
Name: DefaultWebApp_myserver
URI: DefaultWebApp_myserver
Path: .\config\mydomain\applications
everything works fine.
Can any one please let me know if there is any configuration which has to be done
so that I do not duplicate the code in 2 directories
Thanks in advance.
Regards,
Moin -
Error: Invalid configuration for the JMS adapter
Hi!
I'm doing a test with CEP to get messages from a JMS WebLogic queue but I'm getting the following error:
<BEA-2045010> <The application context "Teste" could not be initialized: org.springframework.beans.FatalBeanException: Error in initialization context lifecycle; nested exception is java.lang.IllegalArgumentException: Invalid configuration for the JMS adapter, you must Bean or specify a converter or a type of event.
Teste.context.xml:
<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:osgi="http://www.springframework.org/schema/osgi"
xmlns:wlevs="http://www.bea.com/ns/wlevs/spring"
xmlns:jdbc="http://www.oracle.com/ns/ocep/jdbc"
xmlns:spatial="http://www.oracle.com/ns/ocep/spatial"
xsi:schemaLocation="
http://www.springframework.org/schema/beans
http://www.springframework.org/schema/beans/spring-beans.xsd
http://www.springframework.org/schema/osgi
http://www.springframework.org/schema/osgi/spring-osgi.xsd
http://www.bea.com/ns/wlevs/spring
http://www.bea.com/ns/wlevs/spring/spring-wlevs-v11_1_1_3.xsd
http://www.oracle.com/ns/ocep/jdbc
http://www.oracle.com/ns/ocep/jdbc/ocep-jdbc.xsd
http://www.oracle.com/ns/ocep/spatial
http://www.oracle.com/ns/ocep/spatial/ocep-spatial.xsd">
<wlevs:event-type-repository>
<wlevs:event-type type-name="Pet">
<wlevs:class>testewithprotobuf.MyPet$Pet</wlevs:class>
</wlevs:event-type>
</wlevs:event-type-repository>
<wlevs:adapter id="pet_messageAdapter" provider="jms-inbound">
<wlevs:listener ref="pet_inputChannel" />
<wlevs:instance-property name="converterBean"
ref="PetMessageConverter" />
</wlevs:adapter>
<wlevs:channel id="pet_inputChannel" event-type="Pet">
<wlevs:listener ref="pet_messageProcessor" />
</wlevs:channel>
<bean id="PetMessageConverter" class="testewithprotobuf.PetMessageConverter" />
<bean id="PetBean" class="testewithprotobuf.PetBean" />
<wlevs:processor id="pet_messageProcessor">
<wlevs:listener ref="pet_outputChannel" />
</wlevs:processor>
<wlevs:channel id="pet_outputChannel" event-type="Pet">
<wlevs:listener ref="PetBean" />
</wlevs:channel>
</beans>
My converter class:
import java.util.Collections;
import java.util.List;
import javax.jms.BytesMessage;
import javax.jms.JMSException;
import javax.jms.Message;
import testewithprotobuf.MyPet.Pet;
import com.bea.wlevs.adapters.jms.api.InboundMessageConverter;
import com.bea.wlevs.adapters.jms.api.MessageConverterException;
import com.google.protobuf.InvalidProtocolBufferException;
public class PetMessageConverter implements InboundMessageConverter {
@SuppressWarnings("rawtypes")
@Override
public List convert(Message message) throws MessageConverterException,
JMSException {
BytesMessage bytesMessage = (BytesMessage) message;
long bodyLen = bytesMessage.getBodyLength();
byte[] buffer = new byte[(int) bodyLen];
bytesMessage.readBytes(buffer);
try {
Pet pet = Pet.parseFrom(buffer);
return Collections.singletonList(pet);
} catch (InvalidProtocolBufferException e) {
throw new MessageConverterException(e);
Please, what's wrong?
Thanks!This error usually indicates that you have both event type and converter bean specified or neither specified. In your case, that doesn't appear to the case from looking at the spring file. Could you also paste the contents of your configuration file from META-INF/wlevs directory?
-
Configuration for Transaction Management
Hi,
I am working with Weblogic Server SP1. I am facing a problem in configuring for
Transaction Management.
I have a session EJB say SEJB and two entity EJB say EEJB1 and EEJB2. EEJB1 is
for the parent table
and EEJB2 is for the child table.
I have two records in the database REC1 and REC2.
REC2 has dependencies and cannot be deleted, while REC1 can be deleted.
In weblogic-ejb-jar.xml I have configured as follows:
<weblogic-enterprise-bean>
<ejb-name>SEJB</ejb-name>
<stateless-session-descriptor>
<pool>
<max-beans-in-free-pool>300</max-beans-in-free-pool>
<initial-beans-in-free-pool>150</initial-beans-in-free-pool>
</pool>
</stateless-session-descriptor>
<reference-descriptor>
<ejb-reference-description>
<ejb-ref-name>EEJB</ejb-ref-name>
<jndi-name>EEJBean</jndi-name>
</ejb-reference-description>
</reference-descriptor>
<jndi-name>SEJBn</jndi-name>
</weblogic-enterprise-bean>
Further, in ejb-jar.xml I have set up the <trans-attribute> as RequiresNew for
Session Bean while Supports
for the EEJB. Something like this:...
<container-transaction>
<method>
<ejb-name>SEJB</ejb-name>
<method-intf>Remote</method-intf>
<method-name>*</method-name>
</method>
<trans-attribute>RequiresNew</trans-attribute>
</container-transaction>
In spite of this setting, when, through the client, I am selecting the two records
REC1 and REC2 at the same
time and deleting them, REC1 gets deleted while REC2 does not and gives a TransactionRollbackException.
Ideally, since both are part of a single transaction, both should have been rolled
back.
Please suggest if I am missing on some kind of configuration parameter or setting.
I'll be more than
happy to provide some more details to get the problem solved.
I can also be reached at [email protected]
Thanks in advance,
Regards,
Rishi
TCode: SWF5
Enterprise_Extensions:
-> EA-FS
Enterprise_Business_Functions:
-> FIN_TRM*
Rg
Lorenz -
Dear Members,
Greetings for the day!
I am working on NWBC for HTML in Plant Maintenance module.
We have configured some changes in SPRO for customizing the UI elements( like visibility, mandatory ) like tabs and fields in transactions like IW21( Create Notification).
As of now separate parallel configuration needs to be carried out in NWBC for HTML in PM module to achieve the same UI features for creating notifications and this is time consuming.
Is there any way to read the configuration done in SPRO for the SAP GUI's and leverage the same in NWBC for HTML.
Appreciate your time in responding to this.
Thanks & Regards,
Ram.>
<IfModule mod_weblogic.c>
WebLogicCluster 127.0.0.1:7005,127.0.0.1:7007,127.0.0.1:7003,127.0.0.1:7103,127.0.0.1:7104
MatchExpression /app1
</IfModule>
<Location /weblogic>
SetHandler weblogic-handler
WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007,127.0.0.1:7103,127.0.0.1:7104
DebugConfigInfo ON
PathTrim /weblogic
</Location>
<IfModule mod_weblogic.c>
WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007
MatchExpression /app2
</IfModule>
<Location /weblogic>
SetHandler weblogic-handler
WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007
DebugConfigInfo ON
PathTrim /weblogic
</Location>
>
This configuration is weird little bit. There is MatchExpression /app1 and MatchExpression /app2 and at the same time two <Location /weblogic> sections. Are you sure you understand what that configuration stands for?
Try something like this ...
<Location /app1>
SetHandler weblogic-handler
WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007,127.0.0.1:7103,127.0.0.1:7104
DebugConfigInfo ON
</Location>
<Location /app2>
SetHandler weblogic-handler
WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007
DebugConfigInfo ON
</Location>
where /app1 and /app2 are contexts of your weblogic applications.
http://download.oracle.com/docs/cd/E11035_01/wls100/plugins/apache.html
http://httpd.apache.org/docs/2.0/mod/core.html#location -
How to tell weblogic server which configuration I want to use
Hi Everyone,
I write the logmodule class, configuration class, Action class, client class
and my policy file my.policy.
I add the VM parameter when I start weblogic server
"-Djava.security.auth.policy=D:\bea\wlserver6.1/lib/my.policy"
But I don't know how to let weblogic server know my configuration class, so
that the server will create it when my client code create LoginContext
object.
Some artical told me that add the configuration class name in java.security
file, like the following
login.configuration.provider=mypackage.myConfig
unfortunately, it don't work :(
I always got the exception message
No Configuration Class Name Supplied
Does anyone kindly tell me how to let the system know my configuration class
name?
Regards,
xlzhouHi,
we are facing the same problem, if you get the solution would you please help
us out?
Regards
Sudipto
[email protected] (Joe Zhou) wrote:
I almost got same problem.
I wrote a deme which is using jaas.
The client part:
Properties property = new Properties(System.getProperties());
property.put("weblogic.security.jaas.ServerURL",
"http://localhost:7001");
System.setProperties(property);
// Set configuration class name to load SampleConfiguration, the
//Configuration for the JAAS code example
property = new Properties(System.getProperties());
property.put("weblogic.security.jaas.Configuration",
"test.servlets.TestConfig");
System.setProperties(property);
// Set Configuration file name to load sample configuration policy
file.
property = new Properties(System.getProperties());
property.put("weblogic.security.jaas.Policy",
"C:/bea/wlserver6.1/config/mydomain/Test.policy");
System.setProperties(property);
loginContext = new LoginContext("TestPolicy", new
MyCallbackHandler());
The Test.policy:
TestPolicy
test.servlets.TestLoginModule required debug=true;
And I add "-Djava.security.auth.policy=%WL_HOME%\config\mydomain\Test.policy"
when I start weblogic server.
But when I run the code, I got the exception:
Invalid Configuration Class Name: test.servlets.TestConfig
java.lang.NullPointerException
at javax.security.auth.login.LoginContext.loadLoginModule(LoginContext.j
ava:101)
at javax.security.auth.login.LoginContext.<init>(LoginContext.java:54)
at test.servlets.TestSecure.doPost(TestSecure.java:69)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:265)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:200)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
rvletContext.java:2456)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
pl.java:2039)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
Seems the problem is in my TestConfig.
I just copy the SampleConfig.java as my TestConfig.java (modified a
little) and copy the ConfigParser.java (those are in the
samples\examples\security\jaas\examples\security\jaas)
Any suggestion???
BTW, all the necessary classes is in the .war file.
Thanks in advance.
Joe
"Xiao Ling Zhou" <[email protected]> wrote in message news:<[email protected]>...
Hi Everyone,
I write the logmodule class, configuration class, Action class, clientclass
and my policy file my.policy.
I add the VM parameter when I start weblogic server
"-Djava.security.auth.policy=D:\bea\wlserver6.1/lib/my.policy"
But I don't know how to let weblogic server know my configuration class,so
that the server will create it when my client code create LoginContext
object.
Some artical told me that add the configuration class name in java.security
file, like the following
login.configuration.provider=mypackage.myConfig
unfortunately, it don't work :(
I always got the exception message
No Configuration Class Name Supplied
Does anyone kindly tell me how to let the system know my configurationclass
name?
Regards,
xlzhou -
Error starting Portal or Commerce Server when Configured for Oracle
I've been attempting to configure Portal 4.0 to work with Oracle. I'm running Oracle
8i. I carefully followed the instructions found in "Configuring WebLogic Portal for
Oracle Databases". Specifically, I setup the tablespaces, connection pools and successfully
run the scripts to populate the tables. I am confident the Oracle OCI driver is configured
properly (have done this many times). However, after I make all of the necessary
changes and launch the server, I receive the following error:
Starting WebLogic Server ....
<Jun 26, 2002 4:47:32 AM PDT> <Notice> <Management> <Loading configuration file .\config\wlcsDomain\config.xml
..> <Jun 26, 2002 4:47:39 AM PDT> <Emergency> <Server> <Unable to initialize the
server: 'Fatal initialization exception
Throwable: java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSException:
An error occured creating a database connection for the realm.]
java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSException:
An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:91)
at weblogic.security.acl.Realm.getRealm(Realm.java:62)
at weblogic.security.SecurityService.initializeRealm(SecurityService.java:258)
at weblogic.security.SecurityService.initialize(SecurityService.java:115)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:402)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
'>
The WebLogic Server did not start up properly.
Exception raised:
java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSException:
An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:91)
at weblogic.security.acl.Realm.getRealm(Realm.java:62)
at weblogic.security.SecurityService.initializeRealm(SecurityService.java:258)
at weblogic.security.SecurityService.initialize(SecurityService.java:115)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:402)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
The startup appears to have trouble with the RDBMS security realm. I tried a) leaving
the settings "as-is", configured for Cloudscape, or b) modified to point to my instance
of Oracle (are their additional things I need to load in Oracle to support it using
the RDBMS realm). Is there a way I can disable the security realm to at least get
the server up-and-running (via the web.xml). I've installed and reinstalled many
times, trying various combinations of things.
Any help would be hugely appreciated!
Thanks,
jeffI finally found this bug in the release notes, i'm surprised one of the bea guys couldn't
answer this....
"Mike Friesen" <[email protected]> wrote:
>
I had the same type of problem with portal 4.0. Trying downloading the
newest 7.0, I found it works much better.
Mike
"K C" <[email protected]> wrote in message news:[email protected]...
I found this as well. However, i still am not able to run the portal afterconfiguring
for oracle. While running create_all, i get many errors like "can binda
LONG value
only for insert into a LONG column"
the table are being created, this appears to occur in the "insertingrequired bootstrap
data" phase.
thanks
"Joshua Davies" <[email protected]> wrote:
You probably followed the instructions too closely. I had the same
problem,
due to
something that's not quite a "bug" in the installation instructions.Look
back at
the section "Update Settings for the RDBMS Security Realm" in thedeployment
guide
(http://edocs.bea.com/wlp/docs40/deploygd/oraclnew.htm#1039294).
In the table in step 2, they show the URL on top, and the Driverclassname
underneath
it. HOWEVER... on the actual data screen, the Driver is on top and the
URL is underneath
it. If you're not being very very careful, it's easy to swap thesetwo
values
and put the URL in the Driver input box and the Driver in the URL input
box. Make
sure you haven't accidentally done this; if you have, you can stillchange
this in
the config.xml file (do a text search for an element RDBMSRealm withan
"name" attribute
of "wlcsRealm").
Verify that it looks like this:
<RDBMSRealm DatabaseDriver="weblogic.jdbc.oci.Driver"
DatabaseURL="jdbc:weblogic:oracle"
Name="wlcsRealm"
and not this:
<RDBMSRealm DatabaseDriver="jdbc:weblogic:oracle"
DatabaseURL="weblogic.jdbc.oci.Driver"
Name="wlcsRealm"
Very subtle gotcha...
"Jeff Davis" <[email protected]> wrote:
I've been attempting to configure Portal 4.0 to work with Oracle. I'm
running
Oracle
8i. I carefully followed the instructions found in "Configuring WebLogic
Portal for
Oracle Databases". Specifically, I setup the tablespaces, connectionpools
and successfully
run the scripts to populate the tables. I am confident the Oracle OCIdriver
is configured
properly (have done this many times). However, after I make all of thenecessary
changes and launch the server, I receive the following error:
Starting WebLogic Server ....
<Jun 26, 2002 4:47:32 AM PDT> <Notice> <Management> <Loading
configuration
file .\config\wlcsDomain\config.xml
...> <Jun 26, 2002 4:47:39 AM PDT> <Emergency> <Server> <Unable toinitialize
the
server: 'Fatal initialization exception
Throwable: java.lang.IllegalAccessError:Exception[com.bea.p13n.security.realm.RDBMSException:
An error occured creating a database connection for the realm.]
java.lang.IllegalAccessError:Exception[com.bea.p13n.security.realm.RDBMSException:
An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:91)
at weblogic.security.acl.Realm.getRealm(Realm.java:62)
atweblogic.security.SecurityService.initializeRealm(SecurityService.java:258)
atweblogic.security.SecurityService.initialize(SecurityService.java:115)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:402)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
'>
The WebLogic Server did not start up properly.
Exception raised:
java.lang.IllegalAccessError:Exception[com.bea.p13n.security.realm.RDBMSException:
An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:91)
at weblogic.security.acl.Realm.getRealm(Realm.java:62)
atweblogic.security.SecurityService.initializeRealm(SecurityService.java:258)
atweblogic.security.SecurityService.initialize(SecurityService.java:115)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:402)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
The startup appears to have trouble with the RDBMS security realm. Itried
a) leaving
the settings "as-is", configured for Cloudscape, or b) modified to point
to my instance
of Oracle (are their additional things I need to load in Oracle tosupport
it using
the RDBMS realm). Is there a way I can disable the security realm toat
least get
the server up-and-running (via the web.xml). I've installed andreinstalled
many
times, trying various combinations of things.
Any help would be hugely appreciated!
Thanks,
jeff
Maybe you are looking for
-
I have an MI Server Installed. It worked well for nearly a month. The server version info in brief is WebAS 6.40 with SP20. MI Client's version is SP20.Now I am getting a strange problem. For a new installation of the Client, when I create a new Use
-
How do I identify and delete duplicates from itunes?
Try as I might I cant figure it out. Googling tells me nothing.
-
Linking and ECC document to CRM complaint
Hello! I have to implement the method GET_SEARCH_HELP of the badi CRM_COPY_BADI_EXTERN to get the reference document number in ECC from CRM. Somebody knows how can i do it? Thanks!!
-
Integration with Cisco IP Phones
Possible to integrate Lync to Cisco IP Phones?
-
Why does calender in OSX 10.9 not support add attachments any more
In the latest update 10.9 I do not have the option to add atachements [documents] to my Calender item. In iCloud is this still posible. Any solution?