Weblogic 8.1 sp2 app deployments need too much time

Hi,
I've just installed the new Weblogic 8.1 sp2 version.
With this new version, I've got a very small application, and when I start Weblogic
or redeploy that application, it lasts a lot (2 minutes) when it
just needed a few seconds with Weblogic 8.1 sp1.
I've posted my weblogic.xml. Is there any option I should consider related to
this? Do you need any extra information?
Thanks,
[weblogic.xml]

Hi,
it's me again.
I've been trying many things, and none worked.
I've tried removing all EJBs from the app. I've tried changing from devolpment
to production mode, and it even went slower. I've tried removing pool from the
server. I've tried changing JVM parameters in the startWeblogic.cmd, something
like this:
-hotspot -ms128m -mx128m -XX:MaxPermSize=128m -XX:NewSize=64m
and even with greater values.
I've tried changing values in weblogic.xml for jsp precompile or debug.....
Nothing worked. My app (it's incredibly simple!!) takes over one minute and a
half to be deployed. It uses struts 1.1 and my weblogic is installed on W2k Prof.
sp4.
I never came across this problem with Weblogic 8.1 sp1 and prior versions.
Any idea??? My development is becoming as slow as a turtle :.-(
"Ignacio Sanchez" <[email protected]> wrote:
>
>
>
Hi,
I've just installed the new Weblogic 8.1 sp2 version.
With this new version, I've got a very small application, and when I
start Weblogic
or redeploy that application, it lasts a lot (2 minutes) when it
just needed a few seconds with Weblogic 8.1 sp1.
I've posted my weblogic.xml. Is there any option I should consider related
to
this? Do you need any extra information?
Thanks,

Similar Messages

0PM_OM_OPA_2 needs too much time

hi, experts,
I started a DELTA info-package to 0PM_OM_OPA_2 and the program in r/3 obviosly needs too much time. So in BW I get an error message and the process is interrupted. When I check the extractor via RSA3 every thing is ok, besides the long time for the extraction. Any idea, how can I solve the problem?
best regards
neven

hi, Frank,
thanks for your tip. But, how about the SETUP-Tables? Do I need to delete and refill some SETUP-Tables for this data source ( Transactions LBWG and OLIIBW )?
best regards
neven

Bought i phone 6 64 GB just 3 days before performance is very bad.Couldn't even open app store it takes too much time for opening a web page.

bought i phone 6 64 GB just 3 days before performance is very bad.Couldn't even open app store it takes too much time for opening a web page.

You may need to reset your network settings, making sure the network you're accessing is stable: tap Settings > General > Reset > Reset Network Settings.
If your iPhone still can't connect to App Store, tap Settings > iTunes & App Store > tap the Apple ID and sign out > later, sign in with your Apple ID.

Apps are using too much memory. how do i find out how much each app is using?

MACAir Memory 128gb: the apps are using too much memory. i get not sufficient memory for upgrades. how can i find out how much memory each app is using?

Mavericks is designed to use RAM differently for good reason. Normal
http://appleinsider.com/articles/13/06/12/compressed-memory-in-os-x-109-maverick s-aims-to-free-ram-extend-battery-life
Mavericks uses RAM much more efficiently than any other previous version of OS X. Mavericks now has a memory compression feature that will compress the memory occupied by applications that aren't being actively used and give the freed up RAM to the application that needs it the most.
Memory Pressure graph that tells you how stressed is the system in terms of memory.
Fore more information about OS X Mavericks new system management technologies visit:
http://www.apple.com/osx/advanced-technologies/
See page 5 here:
http://images.apple.com/media/us/osx/2013/docs/OSX_Mavericks_Core_Technology_Ove rview.pdf

Hi from the last two days my iphone have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.

Hi, from the last two days my iphone( iphone 4 with ios 5) have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.

The Basic Troubleshooting Steps are:
Restart... Reset... Restore...
iPhone Reset
http://support.apple.com/kb/ht1430
Try this First... You will Not Lose Any Data...
Turn the Phone Off...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
Turn the Phone On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414

Combining clob taking too much time - need help

Hello,
I want to append clob values into another clob value like
declare
v_temp clob;
v_c1_temp clob;
cursor c1 as select clob_data from t;
-- here t table contains clob_data column holding clob data
-- t table have more then 1500 rows
begin
v_temp := '';
open c1 into v_c1_temp;
loop
v_temp := v_temp + v_c1_temp; --------- combining clob (concat may be used)
end loop;
close(c1);
end;
above part also repeats in outer loop (not shown here)
my problem is :- it is taking too much time - you dont believe 90% more time due to that concatenation.
is it any smart way to do same thing?
It will be very helpful to me.

Hi ,
You should also always try and have the latest BI content patch installed but I don't think this is the problem. It seems that there
are alot of objects to collect. Under 'grouping' you can select the option 'only necessary objects', please check if you can
use this option to install the objects that you need from content.
Best Regards,
Des.

HT201328 Hello, I needed to do a hard reset on my iPhone 3GS and it's taking me too much time. It's taking almost 12 hours by now!!!! I did it by going to "Settings, General, Reset, Erase All Content and Settings", confirm it and then the iPhone turns

Hello,
I needed to do a hard reset on my iPhone 3GS and it's taking me too much time. It's taking almost 3 hours by now!!!!
I did it by going to "Settings, General, Reset, Erase All Content and Settings", confirm it and then the iPhone turns off, gets the screen black with only the animated circle going on. And it's been there since then.
Is this a symptom of something bad? Should I do the hard reset by another way?

Hello Ali Syed,
It sounds like your phone is stuck at the spinning gear icon on the screen after Erasing all Content and Settings on your device. I would start by resetting the device with this process:
To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
From: Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
If the issue persists you may need to put the phone into recovery mode, and then restore it with iTunes as a new device:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Thank you for using Apple Support Communities.
Take care,
Sterling

USB need too much power-nothing is detached?

USB-Devices deactivated
Please remove the device, that needs too much power.
A window comes up, that the usb needs too much power, but nothing is detached too my computer. The right usb is not working anymore. What to do?
Best Anna

Does the device work on another computer? It may have failed.
You may try a powered hub or a USB 'Y' connection cable.
Ciao.

Backing Up Requires Too Much TIme

I have been messing around with iTunes for the past 6 hours. When I talked to an associate they encouraged me to download the new iTunes. In return I am currently having to wait hours for my iPod to be "Back uped." I found some helpful hints online and followed them - including deleting all my apps. Still, my iPod will not go past backing up. It makes me so mad that a process that should take no longer than 10 minutes has wasted almost 7 hours of my day. Apple needs to fix this problem IMMEDITELY.

richardfit wrote:
pc taking too long to boot, touchsmart loading on every boot up, taking way too much time
disable inside application, use msconfig, uninstall other applications, etc.... (as I try to replicate your grammar and style)

White MacBook takes too much time to boot up

Hi there.
I got the topcase(keyboard) of my MacBook repaired. (White MacBook 2006) and after that it takes nearly 7 up to 10 seconds after pressing the power button that I first see apple logo and it boots up.
I'm not sure but seems like that detecting the hardwares take too much time .
any solution?
PS: I'm running Snow Leopard(10.6.2)

macbig wrote:
OK, 32 seconds is not good. I don't think it has anything to do with a keyboard repair. You need to try a little maintenance: Reset Pram - http://docs.info.apple.com/article.html?artnum=2238
Repair Permissions - http://support.apple.com/kb/HT1452
Run Disk Utility >applications>utilities>disk utilities>verify disk
How much free space do you have on your HD: Right click on HD icon and select "get info" in the drop down menu (if you don't have right click capabilities, highlight your HD icon, go file in the Apple menu, and select "get info" in the drop down menu. Let us know your results.
Yes PRAM was the the problem, I've already tried it from this thread http://discussions.apple.com/thread.jspa?threadID=2303507&tstart=0
by the way thank you .

SAP GUI taking too much time to open transactions

Hi guys,
i have done system copy from Production to Quality server completely.
after that i started SAP on Quality server, it is taking too much time for opening SAP transactions (it is going in compilation mode).
i started SGEN, but it is giving time_out errors. please help me on this issue.
MY hardware details on quality server
operating system : SuSE Linux 10 SP2
Database : 10.2.0.2
SAP : ECC 6.0 SR2
RAM size : 8 GB
Hard disk space : 500 GB
swap space : 16 GB.
regards
Ramesh

Hi,
>i started SGEN, but it is giving time_out errors. please help me on this issue.
You are supposed to run SGEN as a batch job and so, it should be possible to get time out errors.
I've seen Full SGEN lasting from 3 hours on high end systems up to 8 full days on PC hardware...
Regards,
Olivier

Taking too much time incollecting in business content activation

Hi all,
I am collecting business content object for activation. I have selected 0fiAA_cha object,while cllecting in the activation but it is taking too much time and then it asks for source
system authorisation and then throws error maximum run time exceded. i have selected data flow before there.
What can be the reason for it.
Please help..

Hi ,
You should also always try and have the latest BI content patch installed but I don't think this is the problem. It seems that there
are alot of objects to collect. Under 'grouping' you can select the option 'only necessary objects', please check if you can
use this option to install the objects that you need from content.
Best Regards,
Des.

BPC application is taking too much time to load

Hi experts!
I'm facing a very weird problem...
We've developed a BPC application (app name: USM).
This application is taking too much time to be loaded in some computers (around 8 minutes to load). Yes, in SOME computers.
There is around 100.000 registers in the database and most coming from material master data.
If I try to load this USM application in another computer, the process loads smoothly. The computer's hardware is all the same, the server is hyper estimated and everyone is in the same network.
I talked to infrastructure departament and we made several tests. We run BPC on the server (loaded quickly), on several computers (some loads quickly, others don't), used wireless and cable connection (got all the same result) and checked communication between BW and BPC but it is ok.
After all, I tried to load APSHEL application in the same enviroment and it loaded intantly. So, I guess it is something wrong with my application. But if was this, I suppose it should happen to all computers and not only with part of them.
Have anybody ever seen something like this?
Thank you in advance.
Rubens
Edited by: Rubens Massayuki Kumori on May 12, 2011 8:43 PM
Edited by: Rubens Massayuki Kumori on May 12, 2011 8:46 PM

Hi Rubens,
I would try making a couple of test:
1. I will install the client in a machine that is located in the same network segment, or try using a vpn that comunicates with the server bypassing all security devices, only to see if the network it's the problem.
2. Making a full optimize of one application to see if maybe the problem it's related to the segmentation of the cubes (i don't think that this is the problem but give it a try).
It is very wierd that in some computers happends and in others don't... also try to clean up the local cache of the applications in those computers that are giving to you bad performce and retry.
hope it helps,

PRS600 ereader taking too much time to load all the books

Whenever I open My PRS600 from complete shutdown it takes too much time to load all the files which are present in Memory card. Is anyone else facing same issue?

Hello,
Recently, I have been having some serious issues when it comes to my Sony PRS-600. I am running on a Windows 7 64-bit, and an updated Reader Library 3.3
The issue comes when transferring books to the e-reader from the library, and from the e-reader to a collection. The problem is that the software becomes intolerably slow while it's processing the command. The Reader Library software window grays out, displays (Not Working) and if clicked on it, shades to a white color and displays either "cancel operation" or "wait until program responds". If I do close the operation, it appears as if the e-reader doesn't follow the operation and still displays "Do not disconnect". Since I do not see any other way to disconnect (other than the eject option), I remove the USB plug which causes a bit more issues with the reader (such as removing all of my collections, for example!).
But anyway, that's not the main issue here. The main issue is that the book transferring is really slow. I need to wait a couple of minutes (or even more) just for the software to process. Moving just 1 MB of data requires so much time as if it's 1 GB. Sometimes it's random and does it fast, and sometimes the application is better not to be dealt with at all while it's processing the command. If I would inspect My Computer, the simple loading of the e-reader storage icons and information would make the Windows Explorer to "crash" (e.g, close all windows and then reopen them). It just happens that in all randomness even the creation of a collection makes the software slow.
So to recap: the reader software is slow when adding and moving books.
I hope someone will help me resolve this annoyance.
Thank you,
KQ

IPad Air too much time to open a link from Mail

SInce the last update to iOS 8.02 my iPad Air takes too much time to open a web link from the Mail App, Safari open itself with a long delay.
furthermore The attachments into email are often not readable, have to reload the message to be able to open the attachment.
LAst but not least, I have too many messages not downloaded from the iMap server and I can read just the title of it.

There's a large thread around about this Dolphin problem.
Disabling Nepomuk in System Settings has proved to be the
cure in many cases.
Deej

Weblogic 8.1 sp2 app deployments need too much time

Similar Messages

Maybe you are looking for