Weblogic 8.1SP6 NodeManager Services Problem

After upgrading to Weblogic 8.1 SP6 from SP3 we had problems starting the Node Manager process as windows, we were able to successfully install it as windows service but when starting Node Manager process it was crashing with below exception in Event Generator log.
occurred on 05/11/2009 @ 15:00:18.870 The exception generated was 80000007 at address 00000000
(ntdll!KiFastSystemCallRet)
The problem is caused because of version of beasvc.exe which is shipped with Weblogic 8.1 SP6. As a work around for this problem we have to make sure that system PATH does not have any spaces in it, which may cause this issue. Clean up the system PATH environment variable so that no spaces exist, and try starting the service. There is patch available on this for weblogic 8.1 SP6.
- - Tarun
Edited by: Tarun Boyella on May 13, 2009 11:02 AM

I did a reinstallation and the problem didnt re-occur. So one neednt work on this problem.
Priya

Similar Messages

Unable to start WLS 9.2 nodemanager service

I have installed the nodemanager on the machine and can run it from the command line using
beasvc -debug "BEA Products NodeManager (D_bfapps_bea_weblogic92)"
This should run the service from the command line as if I started it from the computer management window correct? I ask this b/c the installed service will not start, and I get the following error:
"Could not start the BEA Products NodeManager(D_bfapps_bea_weblogic92) service on Local Computer.
Error 1067: The process terminated unexpectedly."
There is no other information logged on the machine. Please help!
Thanks.

Have you gotten a resolution to this problem? If so, please post the solution. I'm having this exact same problem. I installed WebLogic 9.2 and then installed NodeManager 9.2 as a Windows service. The NodeManager service actually ran for a couple of days--I was able to stop and start WLS servers and connect to the NodeManager via WLST. However, a day or two later the NodeManager service stopped working. Just like you, no debugging information is logged when the service fails. I CAN start NodeManager with startnodemanager.cmd. However, I need the NodeManager Windows Service to work. I opened a ticket with BEA regarding this issue, but they have not come back with a solution, yet.

Apache Virtual Hosts and Weblogic 5.1SP6

Running:
WebLogic Server 5.1.0 w/ Service Pack 6
Solaris 7
Hello, I've been reading through the newsgroups and saw alot of information on
setting up apache and weblogic to handle virtual hosts, but am still having problems
getting it to work.
I have 2 domains that will be served up by one instance of Apache using NameBased
virtual hosts and I would like to have our one instance of WebLogic 5.1SP6 handle
them as well.
Excerpt from my httpd.conf file:
NameVirtualHost 216.xx.x.xx:80
<VirtualHost vcstgws011:80>
ServerName vcstgws011.domain1.com
Port 80
DocumentRoot /opt/vci-10.8/webapps/www
DirectoryIndex index.jsp
<Directory "/opt/vci-10.8/webapps/www">
Options Indexes FollowSymLinks MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
</VirtualHost>
<VirtualHost vcstgws011:80>
ServerName www.domain2.com
Port 80
DocumentRoot /opt/vci-10.8/webapps/www/dsl
DirectoryIndex index.jsp
<Directory "/opt/vci-10.8/webapps/www">
Options Indexes FollowSymLinks MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
</VirtualHost>
Under my default server configuration I have the WebLogic stuff:
<IfDefine WL>
WebLogicCluster vcstgas011.domain1.com:7001
Debug on
DebugConfigInfo on
ConnectTimeoutSecs 60
HungServerRecoverSecs 300
Debug on
DebugConfigInfo on
<Files *.jsp>
SetHandler weblogic-handler
</Files>
<Location /weblogic>
SetHandler weblogic-handler
PathTrim /weblogic
</Location>
<Location /servlet>
SetHandler weblogic-handler
</Location>
<Location /Admin*>
SetHandler weblogic-handler
</Location>
<Location /j_security_check>
SetHandler weblogic-handler
</Location>
</IfDefine>
And here's an excerpt from my weblogic.properties file:
# HTTPD
weblogic.httpd.enable=true
# DocumentRoot configuration
weblogic.httpd.defaultWebApp=/opt/vci-10.8/webapps/www
weblogic.httpd.indexDirectories=true
Any help would be appreciated.
Thanks,
Mark

Anyone have success with Name-Based virtual hosts using same instance of WebLogic?
"Mark Mangano" <[email protected]> wrote:
>
Running:
WebLogic Server 5.1.0 w/ Service Pack 6
Solaris 7
Hello, I've been reading through the newsgroups and saw alot of information
on
setting up apache and weblogic to handle virtual hosts, but am still
having problems
getting it to work.
I have 2 domains that will be served up by one instance of Apache using
NameBased
virtual hosts and I would like to have our one instance of WebLogic 5.1SP6
handle
them as well.
Excerpt from my httpd.conf file:
NameVirtualHost 216.xx.x.xx:80
<VirtualHost vcstgws011:80>
ServerName vcstgws011.domain1.com
Port 80
DocumentRoot /opt/vci-10.8/webapps/www
DirectoryIndex index.jsp
<Directory "/opt/vci-10.8/webapps/www">
Options Indexes FollowSymLinks MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
</VirtualHost>
<VirtualHost vcstgws011:80>
ServerName www.domain2.com
Port 80
DocumentRoot /opt/vci-10.8/webapps/www/dsl
DirectoryIndex index.jsp
<Directory "/opt/vci-10.8/webapps/www">
Options Indexes FollowSymLinks MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
</VirtualHost>
Under my default server configuration I have the WebLogic stuff:
<IfDefine WL>
WebLogicCluster vcstgas011.domain1.com:7001
Debug on
DebugConfigInfo on
ConnectTimeoutSecs 60
HungServerRecoverSecs 300
Debug on
DebugConfigInfo on
<Files *.jsp>
SetHandler weblogic-handler
</Files>
<Location /weblogic>
SetHandler weblogic-handler
PathTrim /weblogic
</Location>
<Location /servlet>
SetHandler weblogic-handler
</Location>
<Location /Admin*>
SetHandler weblogic-handler
</Location>
<Location /j_security_check>
SetHandler weblogic-handler
</Location>
</IfDefine>
And here's an excerpt from my weblogic.properties file:
# HTTPD
weblogic.httpd.enable=true
# DocumentRoot configuration
weblogic.httpd.defaultWebApp=/opt/vci-10.8/webapps/www
weblogic.httpd.indexDirectories=true
Any help would be appreciated.
Thanks,
Mark

Starting the WebLogic server, the NodeManager and the ManagedWebLogicServer (oam_server1)

DB Tier - 12.0.1 - Linux x86_64 SLES11-SP2
Application Tier - Linux x86_64 SLES11-SP2
Fusion MiddleWare - 11.1.2.2
I have installed all components for the OAM server and have gotten it up and running following docs located at
http://docs.oracle.com/cd/E40329_01/install.1112/e49521/install.htm#BABLBHBC
When starting the stack, I find that I have to open three separate xTerm windows for starting the WebLogic server, the NodeManager and the ManagedWebLogicServer (oam_server1). These windows have to be kept open until you decide to stop the servers.
Is there anyway to start the servers with 'nohup' so that they are running in the background? If someone inadvertently kills the VNC sessions, that will mean that the services that were started in that particular vnc session will also be killed.
There has to be another way around this.....and I'm looking to see if anyone on here can help with suggestions.
Thanks

DB Tier - 12.0.1 - Linux x86_64 SLES11-SP2
Application Tier - Linux x86_64 SLES11-SP2
Fusion MiddleWare - 11.1.2.2
I have installed all components for the OAM server and have gotten it up and running following docs located at
http://docs.oracle.com/cd/E40329_01/install.1112/e49521/install.htm#BABLBHBC
When starting the stack, I find that I have to open three separate xTerm windows for starting the WebLogic server, the NodeManager and the ManagedWebLogicServer (oam_server1). These windows have to be kept open until you decide to stop the servers.
Is there anyway to start the servers with 'nohup' so that they are running in the background? If someone inadvertently kills the VNC sessions, that will mean that the services that were started in that particular vnc session will also be killed.
There has to be another way around this.....and I'm looking to see if anyone on here can help with suggestions.
Thanks

How do I run a weblogic platform portal 8.1 on a weblogic server 7.0 service pack 4?

Hello.
How do I run a weblogic platform portal 8.1 on a weblogic server 7.0 service
pack 4?
Is that a supported configuration? any problems / Issues ?
Weblogic Integrator

Why the hell do you want to do that ? ? ?
just run it on 8.1, if you need to get info from the 7.0 server just get it.
8.1 is a whole new framework, what you suggest a hack that is probably not supported.
nerdi
"Integrator" <[email protected]> wrote:
>
Hello.
How do I run a weblogic platform portal 8.1 on a weblogic server 7.0
service
pack 4?
Is that a supported configuration? any problems / Issues ?
Weblogic Integrator

Can't re-add printer after removing from eprint center - 'Web Services Problem'

I have an HP Photosmart Premium C310 series printer (Model Number CN503B) which I have been using with ePrint for about 18 months. Aside from intermittent issues it has worked, I use a chromebook most of the time so rely on the ePrint option via Google Cloud Print.
Last week it stopped working, with every job in the list showing as cancelled. Following advice on the forum I removed the email address of the printer from the eprint center. I thought it would then be simple to add the printer back. However, I have been unable to connect the printer to the web service so I cannot create the code I need to add the printer back.
STEPS TO REPRODUCE:
1. Factory reset printer settings
2. Factory reset network settings
3. Restart printer and Reboot router
3. Settings -> Network -> Wireless Setup Wizard
4. Choose correct SSID, enter password for WPA
5. ‘Connected to Network’
6. Settings -> Web -> Enable Web Services
7. ‘Accept terms’ screen -> Accept
8. ‘Checking for product updates’ screen shows briefly then returns to 'accept terms' screen
9. Next it makes a ping sound and shows ‘Web Services Problem’ ‘Problem connecting to Web Services Server’, it then pings again a few seconds later (which ties in with what I see in the network logs as a second attempt)
10. Log on to printer via web interface and set IP address of printer to manual IP outside DHCP range (as advice on other threads in this forum). Check DNS setting valid (same as gateway server which all other devices on network are also using successfully as DNS)
11. Repeat steps 6 and 7 - still same error message
I consider myself technically savvy and have followed all advice I can find on this forum including the following:
1. reverting to printer and network defaults
2. rebooting router
3. assigning static IP address to printer outside of DHCP range of router
4. connecting to printer via web interface and setting DNS to variously: same as gateway, google DNS (8.8.8.8), ISP DNS
5. adjusting firewall settings on router to explicitly allow and log outbound connection on the HP ports (already had a rule allowing all outbound connections)
As mentioned, the printer worked fine with ePrint previously so I suspect the ePrint server is rejecting a request from my printer for some reason, maybe because there is old / corrupt data on the server regarding my specific printer.
I’m logging outbound traffic from the printer and here are what the router logs show me (printer IP replaced with 192.168.x.x below, even though it is not public )
Thu, 2013-04-11 09:13:42 - TCP Packet - Source:192.168.x.x, 36475 Destination:15.201.202.81,80 - [HTTP rule match]
Thu, 2013-04-11 09:13:43 - TCP Packet - Source:192.168.x.x, 51463 Destination:15.201.224.79,443 - [HTTPS rule match]
Thu, 2013-04-11 09:13:44 - TCP Packet - Source:192.168.x.x, 53044 Destination:15.201.224.79,443 - [HTTPS rule match]
Thu, 2013-04-11 09:13:44 - TCP Packet - Source:192.168.x.x, 51463 Destination:15.201.224.79,443 - [HTTPS rule match]
Thu, 2013-04-11 09:13:44 - TCP Packet - Source:192.168.x.x, 53044 Destination:15.201.224.79,443 - [HTTPS rule match]
Thu, 2013-04-11 09:13:51 - TCP Packet - Source:192.168.x.x, 64270 Destination:15.201.224.79,443 - [HTTPS rule match]
Looks like both are HP sites: first is 'g4t2674.houston.hp.com' and the second secure one is ‘registration-pro-site2eprint.houston.hp.com’ which sound likely to be correct. That suggests the DNS is working but that the registration server doesn’t like the request for some reason.
I had the printer registered for Google Cloud Print but I have now deleted that also and it doesn’t seem to have made any difference (assume it just formats and forwards to the HP ePrint email anyway).
One hack that sheds some further light is to switch off wifi on the printer and then switch on ePrint. Eprint gives an error but stays set as 'on'. When I then switch wifi back on I can then at least check for product updates (it tells me I have the latest product updates). However, web services are still a 'no go'. Network traffic for that product update exchange looks like this:
Thu, 2013-04-11 10:14:51 - TCP Packet - Source:192.168.x.x,63960 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,63938 Destination:15.240.238.56,80 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,63960 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,39054 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,63938 Destination:15.240.238.56,80 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,39054 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x,63960 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x,63938 Destination:15.240.238.56,80 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x,39054 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x,63938 Destination:15.240.238.56,80 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x ,39054 Destination:2.16.226.12,443 - [Any(ALL) rule match]
So clearly the printer can communicate to those servers well enough to find it has the latest firmware.
I realise this is a lot of information but hopefully some of it is helpful for troubleshooting.
Thank you in advance for any help!

The issue disappeared this weekend. I didn't change anything so it must have been something server side. I notice others with the same issue have also seen it resolved.
Thanks to all those who contributed and tried to help out. Although disappointed I went for a long time without ePrint I'm glad that action was apparently taken to resolve in the end.

File Proxy Service Problem on errors

In continuation of this thread...
File Proxy Service Problem on errors
We are now facing two problems.
1.The proxy service is executed twice
2.File is getting moved to error directory with prefixed file names which we are not able to retrieve and use in the notification email.
Not sure how to fix :(

1.The proxy service is executed twice Check if this is due to transaction timeout issue as discussed here. Re: OSB File polling working twice with the same file
2.File is getting moved to error directory with prefixed file names which we are not able to retrieve and use in the notification email.I am not sure wehther you have any option here. You can check with support. Alternatively can raise notification mail with the timestamp and some file/business identifier from the file. The support person can then open the file from error directory to verify the file/business id in the file or educate the support user that the files will have a prefix

Customer Service Problems

After fighting with Verizon customer service over two service issues without any possibility of resolution I am canceling my account.
I’m doing this reluctantly because as a long-term shareholder of Verizon I would like to see the company succeed and keep profitable. Yet I am appalled by the cavalier, disrespectful, obstructionist treatment from your staff in dealing with customer service problems. When you were just the telephone company and operated as a monopoly in a regulated industry, you had to take customer issues seriously.   Now that you are an unregulated telecommunications giant it seems that you don’t feel the need to respond to your customers. Someone in your company needs to hear this and put a stop to these destructive business practices.
In brief, the first issue involved arranging a service call for interruption of internet service. The entire process kept me on the phone for a total of 3 hours over several days. I have given up my land line and use a cell phone exclusively. Verizon’s communication systems and staffing levels caused me to wait on hold for 10-15 for each person that I spoke to. Then each conversation averaged 10 minutes.   In addition, I was transferred to different departments but I did not understand the reason for the transfers. Then the pattern of hold-talk-transfer began again. Several times my calls were dropped necessitating more repeats of the hold-talk-transfer pattern. Some of your staff were South Asian and they either garbled or misunderstood English, thus prolonging the conversation beyond the average of 10 minutes.   During that time I incurred cell phone charges of $.45/ minute.
After the service was restored I called Verizon customer service and asked for a service credit to compensate me for those out-of-pocket expenses over and above 30 minutes which I consider to be a reasonable amount of time to arrange a service call. They denied any responsibility for the amount of time it took to arrange the service call or the amount of time to complain about their service. I was not happy with the outcome so I requested to speak with someone who was a decision maker and had authority to negotiate a settlement. I also asked to have them communicate with me through email. I was told that communicating through email was not possible. These calls followed the same pattern of hold-talk-transfer averaging 30 minutes each. I repeated myself to 3 or 4 people who wrote down my complaint before I got to a manager who had decision making authority. The manager denied any responsibility for the amount of time it took to arrange the service call and would not authorize a service credit.
The second issue involved billing. I signed up for auto-pay to have my monthly bill deducted directly from my bank account. Verizon’s computer system deducted the bill twice, overdrawing my account. I incurred a bank overcharge fee. The same pattern of hold-talk-transfer began for this complaint as well. The customer service staff refused to take responsibility for this error as well. Their solution required me to spend more time and incur extra expenses. I had to repeat myself to 3 or 4 complaint takers before I reached the same manager who denied my first request. He denied any responsibility for this billing problem too.   I had to have my bank retrieve the money under a fraud compliant.
Verizon is one of the largest *communications* corporations in the world.  If your internal systems can't handle customer service calls in a reasonable amount of time, then there is a problem. If your customer service staff is unwilling to take responsibility for such inadequacies and solve the issues that emerge from them, then there is a problem. If a customer has to contact the CEO of the company to try to resolve two service related issues, then there is a problem. When all of those actions prove inadequate, then there is a *communications* problem.
Customer service has flagged my account and put me down as a “problem” customer. Instead of offering even a token settlement, they are prepared to stonewall me by maintaining that the company is just not at fault and that they tried to solve the problems but I wouldn’t cooperate or accept their solutions. Early on in the process, if someone told me that Verizon messed up just a little, but still couldn’t compensate me, I would have accepted that, albeit reluctantly, and dropped the matter.
This is not the way I do business and I resent it when others don’t feel the need to honor any kind of code. I grew up working in my family’s retail liquor store. From the time I was a kid I learned four customer service lessons that I’ve carried over into my adult life:
Admit when you are wrong and try to make up for the mistake.
Never argue with a customer over small things.
Listen to the compliant and don’t just dismiss it out-of-hand
Try to make things right even though you may not be directly responsible for problem.
For my two problems, Verizon customer service staff didn’t even come close to following these common sense rules. I’ve learned that if you ask their customer service people they will repeat back to you some type of business code that they say they operate under. But their behavior tells a different story.
Unfortunately when I spoke with {edited for privacy} of the Executive Presidential Appeals office, I was taken somewhat aback by his manner and demeanor, which was coarse and inappropriate for a customer service discussion, and which I found personally offensive. He and members of his staff agreed to send me emails specifying which part of the Terms of Service they based their decisions on. To date I have not received the communications they promised.
Is this the image of your company that you want the public to see? Are you willing to just shrug off these complaints as an isolated case that is too small to concern yourself about? I’m afraid the answer will be yes. Not only do you feel that you are too big to fail, but you are too big to care.   Customer service means solving problems not manufacturing bad will and resentment.
My purpose in writing this note has been twofold: to make one last effort to solve my problem and to hope that someone will take note about the issues about customer service practices that are harmful to the company. I'd be happy to speak with someone with real authority to deal
with my issues but have no interest in repeating my past experiences.
It's too bad that this had to happen since the solution could have been so easy and simple.
I plan to publish some form of this letter and distribute it to the public.
Solved!
Go to Solution.

Therefore, I request to please clear this unacceptable due balance, and contact Experian to removed and clarified the mistake in my credit report.
RE:  Cancellation fee charged on internet DSL service charged by mistake. {edited for privacy}
A $65 balance remain for a cancellation fee on internet DSL service, by Verizon New York mistake.
In February of 2010, I set up my phone and TV in a vacation plan but keep my internet service active. After a month I had a vacation plan, suddenly without notification, my internet service was suspended and a cancellation fee was issued.
My final statement was $ 24.47. I cleared a check from Verizon.
I contacted Verizon online to request connect my internet service and discuss the issue on the cancellation fee. The response was that I should pay the internet cancellation fee, and paid a new activation.
After fighting with Verizon customer service over the unacceptable fee charge service issue without any possibility of resolution I cancel my home phone which was in a vacation plan.
Later I kept receiving the statement with this cancellation fee every month. I called and discussed the issue more than 6 times during the next 6 months, The entire process kept me on the phone for a total of 2 hours over several months. The costumer representatives responded that the issue was in an investigation.
Later,  a Collector company start chasing me to get the $65 paid. Phone number: {edited for privacy}, Inclusive, they made an offer to reduce the amount if I accept to pay or contact Verizon to request a clarification.
By the end of the year, I contacted Verizon costumer services one more time but the representative stated that the account is not visible anymore.
Convinced that the problem on this account was resolved, the second week of November, I called Verizon to reestablish my account with a new home phone number and Internet DSL connection.
The answer was that  following Verizon policy I was unable to get a new account if a balance remain.
After I explained the events, a manager (non-identified) who spoke to me by phone told me that Verizon will investigate the issue and I should wait for approval.
On November 16, my account was confirmed approved and clear of debt, therefore, Verizon welcome me back with Home phone and internet DSL Service and confirmation on my online registration.
New number:{edited for privacy} ; Email:{edited for privacy}
Also, during the months of January and February 2010, Verizon New York, made other charges mistakes in my account (See details below) that have been resolved with an apologize and a refund.
Events that prove the lack of training and support Verizon customer and billing service have.
Chronology of the emails exchanged between Verizon Ecenter and myself after I requested investigation with the charges.
01/10/10   I have contacted Verizon customer support regarding of a mistake in my internet service statement.Tracking # 430824. Reference: Duplicate charges for Internet Security suites service.
1/12/10 Verizon eCenter responded. Angela. ' Apologized for the inconvenience. 'The cancellation and credit will appear on the next bill'.
2/08/10 Verizon eCenter responded. Cheniqua. 'I have issued a credit of $6.52 for a Verizon internet security suite charges'; your internet charges
2/04/10 I have contacted Verizon customer support in regard of clarification in my Direct TV  statement.
Tracking # {edited for privacy}. Reference: Balance from Direct TV due to my recently requesting vacation plan.
2/06/10 Verizon eCenter responded (John) Verizon Bill statement: February 26 = $6,73 paid
2/06/10 I have contacted Verizon customer support in regard of a mistake in my home phone statement.
Reference: By mistake, international fee in my home phone (inactive line/vacation plan) was charged.
Tracking # {edited for privacy}
2/08/10 Verizon eCenter responded. (Linnette) 'I apologize for the error'.
A credit for the international plan has been applied to your account and will appear on the next statement.'
2/08/10 Verizon eCenter responded (Cheniqua) 'The regional essential calling plan does not qualify for a discount during vacation suspension. Which prove that my home phone was in a vacation plan.
2/15/10 I have contacted Verizon customer support in regard of a non-notified, neither requested suddenly suspension on my internet DSL service and charged a cancellation fee for this suspension.
Tracking # {edited for privacy}
2/16/10 Verizon eCenter responded (Michael) I am sorry for the inconvenience you have experienced.
Please contact our Consumer Sales and Solutions Center directly at 1-800-Verizon or (800) 837-4966
Monday through Friday between 8:00 AM to 6:00 PM Local Time.
2/16/10 Verizon eCenter (Sue) responded : I am sorry for the inconvenience you have experienced.
I understand your frustration and concern regarding canceling your internet service in error. In order to provide you with the best customer service, please contact our Consumer DSL Sales and Solutions department directly at (800) 567-6789 and a representative will be happy to assist you.
I stand on my decision of not pay for someone else mistakes.
Your actions have damaged my integrity as a good costumer and citizenship.
Without doubt after this problem get clearly resolved, you will lose this good costumer, get a negative feedback and I am planning to publish this letter at every web forum available.

Urgent web service problem. can not find url of WSDL

Hi all,
I met a web service problem recently.
1 I have set up a web service and reside it on Java System Application server9.0. But there's a bug of this web server, which will stop after the user log off the server. I have installed the Application server as a windows service. It suppose to run all the time. I don't know why the server stop after I log off.
2 For that reason, I tried to migrant my web service from the java application server to Tomcat5.5. I deployed my web service to folder webApps. But I don't know the WSDL url of the web service, which is the web reference for my frent-end c#.net application.
Anybody can give me some idea?
Many thanks

Nobody knows?
Please help me

No Service Problem in iPhone After iOS 8

no service problem in iphone 4s after upgradeing to ios 8
tried all the tips which are given in iphone support and he sim card many times bt still face same problem

Have you tried these?
http://www.iphonetopics.com/ipad-2-ios-8-no-service-bug/

Running JRA recording with Weblogic running as a service

Is it possible to run JRA recording while running the WebLogic application server as a service?
The spec for our environment is as follows:
- JRockit JVM version: JRRT 3.1.0 1.4.2
- Weblogic version: 8.1 SP6
- OS: Windows XP SP3
Ideally, we would like to be able to run JRA recording every hour as an automated process, however as there is no java.exe process to attach to it seems this might not be a possibility? I appreciate is certainly possible to run the application as a console application and attach to the PID of a running java process using JRCMD if WebLogic is not running as a service. Are there any solutions for taking JRA recordings when JRockit is running in a Weblogic Service?

Tim,
You can try to run beasvc.exe in debug mode, from a command prompt after the
server is booted. You can run it by: >beasvc -debug ...
This will simulate the service being started in the foreground so that you can
see output messages. You may be trying to run beasvc in a way that is not
intended. If you continue to have issues, you should open a case with BEA
Support.
Regards,
Glenn
Developer Relations Engineer
BEA Support
Tim Isenhart wrote:
I want to collect performance data from weblogic running as a service. I
customized the commandline in the installSvc script and inserted a profiler
class in front of weblogic.Server.
When i start the service, beasvc crashes.
How can i work around this without resorting to running a manual script ?
Thx,
Tim

Where to download weblogic server 6.1 service pack 1?

hi ,
can you please lemme know the link to download weblogic server 6.1 service pack 1?

The latest version WLS6.1 sp2. you can download the server from
http://commerce.bea.com/downloads/weblogic_server.jsp.
Thanks
Yu
"rajesh" <[email protected]> wrote in message
news:3c3c9567$[email protected]..
hi ,
can you please lemme know the link to download weblogic server 6.1service pack 1?

Weblogic running as a service

I want to collect performance data from weblogic running as a service. I
customized the commandline in the installSvc script and inserted a profiler
class in front of weblogic.Server.
When i start the service, beasvc crashes.
How can i work around this without resorting to running a manual script ?
Thx,
Tim

Tim,
You can try to run beasvc.exe in debug mode, from a command prompt after the
server is booted. You can run it by: >beasvc -debug ...
This will simulate the service being started in the foreground so that you can
see output messages. You may be trying to run beasvc in a way that is not
intended. If you continue to have issues, you should open a case with BEA
Support.
Regards,
Glenn
Developer Relations Engineer
BEA Support
Tim Isenhart wrote:
I want to collect performance data from weblogic running as a service. I
customized the commandline in the installSvc script and inserted a profiler
class in front of weblogic.Server.
When i start the service, beasvc crashes.
How can i work around this without resorting to running a manual script ?
Thx,
Tim

TS4429 9 months 6 replacements and still the no service problem. Only a restart will bring the service back.I have tried all the suggestion to fix this but it is still happening. Please Help

I have had 6 replacement Iphone 4s and still my issue has not been resolved. What more must I do to have a telephone that can receive phone calls without me having to check it every 20 mins to make sure I have network service. Renewing the simcard has also not worked.

I was thinking that Kabel Deutschland might be the problem but my wife has a Iphone 3GS on the same network and she never has the no service problem. Also when I said I have had 6 replacements yes they all had at one time or another this issue with no service but they had other issues like not switching off or bright spots on the screen etc etc. Also the sim card has been replaced twice

Nodemanager starting problem

Hi Experts,
I have installed RCU/Weblogic 11g and SOA 11g successfully with out any issues.
When I try to start Node manager, I am getting following issue (default it taken 5556 port number and it is a new system where I have installed above softwares)
Issue
[oramw@HDCHBSCGN20109 bin]$ ./startNodeManager.sh
+ CLASSPATH=/mwhome/BEA/Middleware/patch_wls1034/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/mwhome/BEA/Middleware/patch_ocp360/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/mwhome/BEA/Middleware/jrockit_160_22_D1.1.1-3/lib/tools.jar:/mwhome/BEA/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/mwhome/BEA/Middleware/wlserver_10.3/server/lib/weblogic.jar:/mwhome/BEA/Middleware/modules/features/weblogic.server.modules_10.3.4.0.jar:/mwhome/BEA/Middleware/wlserver_10.3/server/lib/webservices.jar:/mwhome/BEA/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/mwhome/BEA/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar::/mwhome/BEA/Middleware
+ export CLASSPATH
+ export PATH
+ cd /mwhome/BEA/Middleware/wlserver_10.3/common/nodemanager
+ set -x
+ '[' '' '!=' '' ']'
+ '[' '' '!=' '' ']'
+ /mwhome/BEA/Middleware/jrockit_160_22_D1.1.1-3/bin/java -jrockit -Xms128m -Xmx256m -Dcoherence.home=/mwhome/BEA/Middleware/coherence_3.6 -Dbea.home=/mwhome/BEA/Middleware -Xverify:none -Djava.security.policy=/mwhome/BEA/Middleware/wlserver_10.3/server/lib/weblogic.policy -Dweblogic.nodemanager.javaHome=/mwhome/BEA/Middleware/jrockit_160_22_D1.1.1-3 weblogic.NodeManager -v
<Jun 24, 2011 9:59:01 AM> <INFO> <Loading domains file: /mwhome/BEA/Middleware/wlserver_10.3/common/nodemanager/nodemanager.domains>
Jun 24, 2011 9:59:01 AM weblogic.nodemanager.server.NMServerConfig initDomainsMap
INFO: Loading domains file: /mwhome/BEA/Middleware/wlserver_10.3/common/nodemanager/nodemanager.domains
Even it is not created nodemanager.properties file
Please help me to resolve the same.
Thanks,
Phani

this could help
http://blog.whitehorses.nl/2010/10/05/installing-application-integration-architecture-on-soa-suite-11g-r1-ps2/
have you done the step
"Change the NodeManager Options ( wlserver_10.3\common\nodemanager\nodemanager.properties ) and set StopScriptEnabled & StartScriptEnabled options to true"
ah yes but you said you have no "nodemanager.properties" file.... weird...you can still create it by hand....

Weblogic 8.1SP6 NodeManager Services Problem

Similar Messages

Maybe you are looking for