Weblogic, Apache and Virtual Hosts

Hello,
I have apache set for name-based Virtual Hosting (I'm serving 2 domains from the
same IP) and am running into the following problem:
Even though DOMAIN 2 has its own document root specified in the Apache httpd.conf
file, that is different than the document root for DOMAIN 1, both URLs are serving
up the same index.jsp from WebLogic (v. 5.1).
If I change the httpd.conf entry for DOMAIN 2, to serve up index.html instead
of index.jsp, it works????
Is there some setting I need in weblogic.properties???
Any help would be appreciated!!
Thanks,
Mark Mangano

Similar Messages

Help with apache and virtual hosts

I hope someone can help me I had installed shared point for testing and learning it. I had setup alternative mapping and know I want to add sub domain to my Apache web server. So I have sub domain redirecting back to share point. Also mine website is being redirected to share point. How I can have sub domain redirected to share point and main website go to my drupal ? I had created virtual host for main website but I still get redirected to share point.

I have this and the problem is that main domain goes to share point.
<VirtualHost xxxx.us:80>
ServerName xxxx.us
ServerAlias www.xxxx.us
DocumentRoot "/srv/http"
ServerAdmin [email protected]
ErrorLog "/var/log/httpd/error_log"
CustomLog "/var/log/httpd/access_log" common
<Directory />
Options FollowSymLinks
AddHandler cgi-script .cgi .pl
Options ExecCGI Indexes FollowSymLinks MultiViews +Includes
AllowOverride None
Order deny,allow
Deny from all
</Directory>
</VirtualHost>
<VirtualHost sharepoint.xxxx.us:80>
ServerName sharepoint.xxxx.us
ServerAlias sharepoint.xxxx.us
DocumentRoot "/srv/http"
ServerAdmin [email protected]
ErrorLog "/var/log/httpd/error_log"
CustomLog "/var/log/httpd/access_log" common
RewriteEngine On
RewriteLog "/var/log/httpd/rewrite_log"
RewriteLogLevel 9
RewriteCond %{HTTP_HOST} !^(sharepoint\.)?hebe\.us$
RewriteRule ^(.*)$ http://hebe.us$1 [L,R=301]
ProxyRequests On
ProxyPreserveHost On
ProxyVia full
ProxyPass / http://192.168.0.38/
ProxyPassReverse / http://192.168.0.38/
</VirtualHost>
Last edited by tritron4 (2013-06-19 17:01:08)

Apache Bridge and Virtual Hosts?

Hi,
 I'm running Apache 3.1.19 with the bridge to two clustered 'Weblogic
 5.1sp8's - Apache is configured for several virtual hosts.
 Is it better to run several instances of Apache each with its' own bridge -
 not entirely sure how the bridge is written/operating so the concern is
 that if the bridge blocks for one virtual host, it does so for all?
 How can I find out more about the bridge and how it's written? I've also
 heard mention of being able to configure the bridge to do weighted
 load-balancing rather than simple round-robin - can't find this in the
 bridge documentation though - can anyone help?
 Thanks!
 yrs James


 James,
 As my understanding of Apache plugin modules, it only supports
 round-robin load balancing at this time.
 Brian
 "pipex news" <[email protected]> wrote:
 >Hi,
 >
 >I'm running Apache 3.1.19 with the bridge to two clustered
 >'Weblogic
 >5.1sp8's - Apache is configured for several virtual hosts.
 >
 >Is it better to run several instances of Apache each with
 >its' own bridge -
 >not entirely sure how the bridge is written/operating
 > so the concern is
 >that if the bridge blocks for one virtual host, it does
 >so for all?
 >
 >How can I find out more about the bridge and how it's
 >written? I've also
 >heard mention of being able to configure the bridge to
 >do weighted
 >load-balancing rather than simple round-robin - can't
 >find this in the
 >bridge documentation though - can anyone help?
 >
 >Thanks!
 >
 >yrs James
 >
 >
 >
 >

CFCs and virtual hosts on Apache

I'm running Apache 2.0.x and using a virtual host to remap
the document root to a separate drive (d:\public\test)
When I try to use remoting, I get the error:
[RPC Fault faultString="File not found:
C:\WebServer\Apache2\htdocs\test\test.cfc"
faultCode="Server.Processing" faultDetail="null"]
at mx.rpc::AbstractInvoker/
http://www.adobe.com/2006/flex/mx/internal::faultHandler()
Now the htdocs directory is the primary document root for the
server, but this is being overridden by the specific document root
change in the virtual host entry. Regular CF pages that reference
this component work fine, but flex is throwing a fit.
Any ideas?
Chris

try cross domain xml in server root..may be it will work.
have a look on cross domain help page :
http://www.adobe.com/devnet/articles/crossdomain_policy_file_spec.html

Agent for Apache w/Virtual Hosts question

I have an apache installation with two vritual hosts defined. The AMAgent for apache is installed and working fine. But ... I only want the agent to manage one of the virtual hosts. The virtual hosts are IP based because they both run over SSL. How do I tell the agent to not manage the second virtual?
Mark

I've tried that, and no luck. We actually set com.sun.am.policy.agents.config.notenforced_list.invert to 'true', inverting the meaning of the not enforced list, and there is just one specific sub-URL (https://site1.foo.com/suburl/*) in the list. So everything else should already be 'not enforced'. And testing against other url's under site.foo.com shows that to be true.
The behaviour I am seeing is actually odd ... When I try to go to https://site2.foo.com/, I get redirected to https://site1.foo.com/. You would think that, if the Agent is the problem, then it would redirect me to the login url defined in AMAgent.properties. But it doesn't ... it just sends me to https://site1.foo.com/.
But I know the plugin is the issue because, if I comment out the reference to dsame.conf in httpd.conf, everything works as expected.
Mark

How to Install Physical and Virtual Host

I am getting licensing issues after I installed Essentials 2012R2 on a physical machine and then used the same license to virtualize it. It's saying my physical machine needs to hold all the FSMO roles in which my virtual machine is hosting those roles.
I read that Microsoft allows you to use the Essentials license for the physical and virtual server. Is that correct?
Is there a specific service I need to remove on the physical machine in order for these errors to stop? I still have the Windows Server Essentials Experience service installed. Is that what needs to be removed?
Thanks,
Doug

Hi Doug,
There is an article that provide details of licensing for Windows Server 2012 R2 Essentials. Please refer to and check if can help us to understand licensing for Windows Server 2012 R2 Essentials better.
Understanding Licensing for Windows Server 2012 R2 Essentials and the Windows
Server Essentials Experience role
Please also refer to following article and check if can help you.
Customize Deployment - Windows Server Essentials
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Http deny and virtual hosts

solaris 8 ips sp4 gw and server on 1 host
got 5 domains en added these to the platform.conf
and using ssl cert to access these domains.
everything works fine but when i add the url the user
can access only in the domain policy url list and deny the rest i get a 502 gateway error ! log gateway says
sessionid not allowed ! what's wrong ?
adding http://domain.sub.com in allow list doesn't help

Hi,
Is there a "*" in the deny URL list. Looks like portal gateway checks deny list and denys all the URL's
without even the virtual host. Please try removeing "*" from the deny list.
Hope this helps.
Regards,
Raj_indts
Developer Technical Support
Sun Microsystems http://www.sun.com/developers/support

Wiki and virtual hosts

Is there any way to limit the visibility of group wikis when using virtual hosts? Let me explain...
We have two public sub-domains that map to two virtual hosts on a single Leopard server box:
site1.example.com
site2.example.com
Each site has it's own wiki that is up and running just fine.
The problem is when we visit
site1.example.com/groups
we see the wikis for both site1 and site2 listed. When we click site1 we get through to the site1 wiki. When we click site2, we get a file not found error. The opposite happen when we visit site.example.com/groups.
What I'd really like is for site1.example.com/groups to only list the site1 wiki and site2.example.com/groups to only list the site2 wiki.
Is this possible?

I managed to do this by a 'cheap and nasty' method!
The group listing is created by the file
/usr/share/wikid/lib/appletemplates/grouplisting.xsl
it is the ONLY xsl file that cannot be overridden by a custom wikitheme, but it can be edited.
Within this file you will find an unordered list,
<ul class="contentlist">
</ul >
if you replace this by
<ul class="contentlist">
<script type="text/javascript">
if(location.hostname=='www.foobar1.com'||location.hostname=='foobar1.com')
document.write('<li><a href="http://www.foobar1.com/groups/group_name1/"><img src="/collaboration/images/group.jpg" alt="" width="32" height="32"/>title1A website that ...</a></li>');
document.write('<li><a href="http://www.foobar1.com/groups/groupname2/"><img src="/collaboration/images/group.jpg" alt="" width="32" height="32"/>title2Another website </a></li>');
document.write('<li><a href="http://www.foobar1.com/groups/groupname3/"><img src="/collaboration/images/group.jpg" alt="" width="32" height="32"/>title3A final website .</a></li>');
else if(location.hostname=='www.foobar2.com'||location.hostname=='foobar2.com')
document.write('<li><a href="http://www.foobar2.com/groups/group_name4/"><img src="/collaboration/images/group.jpg" alt="" width="32" height="32"/>title4 The Home site of </a></li>');
document.write('<li><a href="http://www.foobar2.com/groups/group_name5/"><img src="/collaboration/images/group.jpg" alt="" width="32" height="32"/>title5An online t;/span></a></li>');
else
document.write('<li><a href="http://www.foobar3.info/groups/group_name6/"><img src="/collaboration/images/group.jpg" alt="" width="32" height="32"/>title6 The Home site .</a></li>');
document.write('<li><a href="http://www.foobar3.info/groups/group_name7/"><img src="/collaboration/images/group.jpg" alt="" width="32" height="32"/>title7A wiki for .</a></li>');
</script>
</ul>
Save and restart the webserver from within serveradmin and it should appear.
OK, so it doesn't automatically respond to new groups as you create them but it's easily updated and, if you follow the instructions from a thread I started on wiki_entry tags you COULD update it from within an admin wiki
I don't claim it's pretty, or that it will survive apple's update once they have sorted out their inability to cope with virtual hosting, but it works.

Web App and Virtual Host and Clustering

 Hi,
 How are you doing?
 What is the best way to deploy a web application using a virtual host on a clustered
 environment?
 Here is what we are doing:
 o Deploy the web application on the virtual host
 o Deploy the virtual host on the cluster
 o Make the web appliation, the default application on the virtual host
 This seems to work, but I have additional questions?
 In the above deployment, looking at the deploy tab for the web application shows
 that the application is deployed to both the cluster as well as the virtual host.
 Even though we didn't explicitly deploy to the cluster! What happens if we deploy
 explicity (i.e., target) the web application to the cluster?
 What other approaches / configurations are you guys using?
 Thank you so much,
 -Bart Simpson


Never mind, I think I have a solution. Even though e-docs say that DefaultWebApp attribute at virtual host level was deprecated as of WL 8.1 (inline with Servlet 2.3 specification) one can directly edit config.xml file and add the attribute.
For instance, here is an example to set webapp APP1 as a default webapp for virtual host vhAPP1:
<VirtualHost
Name="vhAPP1"
DefaultWebApp="APP1"
... />

Servername and virtual host name is the same - how to handle this

Hi,
I set up a server with the hostname yxzwiki.org
In the Server app under Websites this domain points to /Sites
In this /Sites directory is all my content (several Wikis) and also the phpmyadmin.
What is the issue now?
I want this xyzwiki.org not only as the hostname but as a virtual host as well.
So I have the following entry in the corresponding conf file.
<VirtualHost *:80>
ServerName xyzwiki.org
ServerAdmin [email protected]
DocumentRoot "/Sites/xyzwiki/xyzenwiki"
DirectoryIndex index.html index.php
How can I handle this?
xyzwiki.org shows the content of /Sites/xyzwiki/xyzenwiki but I cannot e.g. get access to http://xyzwiki.org/phpmyadmin
Any ideas?
Thanks
Tristan

I guess I have talk more about this issue that people got the chance to help
xyz.org is the host name of our server.
The intention of this server is to run a wiki via mediawiki.
When we first set up the server we planned to have three language versions and the corresponding wikis were found on the server under
en.xyz.org for the English version
de.xyz.org for the German and
es.xyz.org for the Spanish version
But then we decided ONLY to concentrate on the English version and so prefix en became deprecated and we only want the domain xyz.org that shows the English Wiki.
The English wiki is on our server under /Sites/xyz-wiki/xyz-enwiki
In the Server.app I defined /Sites as the server website and I have a virtual host for xyz.org AS WELL that defines /Sites/tangowiki/tangoenwiki.
This seems to overrule the entry in the server.app as xyz.org shows the content of /Sites/xyz-wiki/xyz-enwiki
As I have other "services" as well under /Sites, e.g. phpmyadmin it is not possible for me with xyz.org/phpmyadmin to get to this service.
So what I am looking for is a trick that I can keep the /Sites directory as the main directory for xyz.org. I was thinking of a symlink for the index.php from /Sites/xyz-wiki/xyz-enwiki and to remove the virtual host entry but this does not work. Any other ideas.
Cheers
Tristan

FMS3 Linux and virtual host

Instaled FMS3 on my Linux box, but some strange things happen
with virtual host configuration:
1. add virtual host directory to /conf/_defaultRoot_ (just
making a copy of _defaultVHost_). It contains all needed files -
Application.xml and Vhost.xml with default settings
2. Restart the server
When I login into admin console, new vhost appears in the
list, but it's impossible to connect to it, or just restart it.
Permissions are ok.
Am I forgetting something?

I finnaly get it - FMS starts fmscore process for each vhost,
but after about 5-7 minutes of work every process quits. Logs don't
say anything, what can it be?
/opt/adobe/fms/fmscore -console -adaptor _defaultRoot_ -vhost
test.com -ap -conf /opt/adobe/fms/conf/Server.xml -name
_defaultRoot_:test.com:::
Adobe Flash Media Server (Core)Console mode.
Host: localhost IPv4: 127.0.0.1
Starting admin app on core (4651).
Core (4651) connecting to admin.
Core (4651) connected to admin.
Core (4651) connection to admin accepted.
Core (4651) sending register cmd to edge.
Core (4651) disconnected from edge.
Core (4651) disconnecting from admin.
Unloaded application instance admin

How do I configure Apache for Virtual Hosts?

This is whatI've done so far: I have a static IP. I have a registered domain name that points to this IP. I've made my sites in iWeb. Set up my computer for Personal Web Sharing. I've used Smultron to edit the httpd.conf files per this tutorial : http://www.macminicolo.net/videos/ServerVideo6.mov. Still no luck. I can't access the site from the internet.
Can anyone shed some light ?

Hi Joe,
Se if this helps...
http://mark-kirby.co.uk/2008/setting-up-virtual-hosts-on-os-x-leopard/

Apache mod_rewrite, htaccess and virtual host

Does not appear that the htaccess file is doing anything at all; I tested with a 301 redirect and even put some random nonsense in it in hopes to provoke a server error and nothing.
httpd.conf : http://pastebin.com/36qFCg5q
httpd-vhosts.conf
<VirtualHost *:80>
 DocumentRoot "/Users/jwindhall/Railo/tomcat/webapps/ROOT/dentist_app"
 ServerName xxx.com
 ServerAlias www.xxx.com
<Directory "/Users/jwindhall/Railo/tomcat/webapps/ROOT/dentist_app">
 Options All Includes Indexes
 Order allow,deny
 Allow from all
 AllowOverride All
</Directory>
ProxyRequests Off
<Proxy *>
Options All Includes Indexes
Order allow,deny
Allow from all
AllowOverride All
</Proxy>
ProxyPass / http://www.xxx.com:8080/
ProxyPassReverse / http://www.xxx.com:8080/
</VirtualHost>
jwindhall.conf:
<Directory "/Users/jwindhall/Railo/tomcat/webapps/ROOT/dentist_app">
Options Indexes MultiViews FollowSymlinks
AllowOverride All
Order allow,deny
Allow from all
</Directory>

The question etresoft was asking was around what goal or end or configuration you were trying to achieve here, and not who you might be. With some background on the problem and on the particular goal, we might be able to provide you with a more direct solution, or debug the error.
It looks like you're trying to run some Tomcat stuff. Something like this?
Though that articile doesn't indicate it, the provided set-up there looks to be specific to OS X client. Are you running OS X Server, or OS X client. And in either case, which version? (The management user interfaces do vary here, both by client and server, and by version.)
The article also looks to be for 10.6 or earlier, or it presumes that you have Java installed. That's not the default, so that's something you'll need to establish.
Apache redirects do work on OS X and OS X Server. If you're just testing that, get rid of Java and Tomcat and the rest (from your configuration test) and test just the URL redirects.
Apache is also sensitive to file protections and ownerships, as it strives to avoid allowing an attacker at your whole system (by default), though those protections can be overridden.
As a first step toward troubleshooting your current configuration, invoke the Apache configuration test on your system and see if it tosses any errors, and also check the Apache server logs for relevant errors. The logs are usually in the /var/log/apache2 directory, though that can be changed. This'll make sure the core giblets are working. The next steps would usually then involve checking the protections on the web directories, and then testing Java and Tomcat individually.
OS X Server is a little more simple to set up and (mostly) avoids needing to access the configuration files, and the directories and related are IMO a little easier to deal with; you're using Server Admin.app or Server.app (depending on the OS X Server version) to manage all that, and not a text editor.
And you may already be aware of this; do not try to use a GUI editor to edit the configuration files. TextWrangler will work here, but most other GUI editors won't. Using a command-line editor is more common; nano or vim or emacs or such. FWIW.

Clone and "virtual host"

I used rapid clone (note 230672.1) to clone 11.5.10.2.
Site uses big IP and a "virtual address" for the cloned 11i logon page.
I am able to logon but get an error using Administrator -> Security - User Define
"load: class oracle/apps/fnd/formsclient/formsLauncher class not found"
Anyone encountered this before?
Metalink notes don't help.

Hi Chirag
Do one thing
1) Start the vncserver as appsuser
2) You will get a value in my case test.erp.com:1
3)open a vncserver session from a client machine
4) set the display there export DISPLAY=test.erp.com:1.0
5) Now go to the xml file APPL_TOP/admin
6) search for display
7) put the value that u have set for the display (test.erp.com:1.0)
8)run autoconfig
hope this will help

Https and virtual host redirect configuration

Hello,
IAS10EE
Only one of a number of mod pl/sql applications needs to be available from the internet via https - https certificate has been installed and is working.
I've amended the default ssl.conf to try to redirect all https traffic to the one application see below
<VirtualHost *:443>
# added
ServerName portal.tw.com
ServerAlias portal.tw.com
Options +FollowSymLinks
DocumentRoot "/opt/ris/apex"
RewriteEngine On
RewriteRule .* https://%{SERVER_NAME}/pls/apex/f?p=103:101 [R=301,L]
RewriteLog /opt/ris/log/rewrite.log
## end add
Problem is that I cannot get a https://portal.tw.com to display when the rewrite rule is in
When taking out the rewrite all DADs are accessible which I do not want!
I cannot see any log entries in access_log, error_log, ssl_request_log that hints/explain the error
Has anyone any ideas how to modify above to get it working or how to troubleshoot this?
Many thanks
Pete

Thanks for your reply
in the access_log and ssl_request_log I can see that the page is being requested
so the redirect 301 is working but no page is sent back to the browser, the browser sort of hangs. I suspect the rewrite rule is missing something - Any ideas that I can try?
Thanks
Pete
Looking in ssl_request_log -
UNKNOWN SSL_RSA_WITH_RC4_128_MD5 "GET /pls/apex/f?p=103:101 HTTP/1.1" 395
an entry like this every second
Looking in current access_log*
[07/Nov/2006:00:12:20 -0800] "GET /pls/apex/f?p=103:101 HTTP/1.1" 301 395
an entry like this every second

Weblogic, Apache and Virtual Hosts

Similar Messages

Maybe you are looking for