Weblogic apache HTTP configuration question

Hi All,
Here is my current configuration:
Oracle Weblogic 10.01
Linux Centos 5
Apache HTTP 2.2
LoadModule weblogic_module modules/mod_wl_22.so
<Location /TESTCRM>
<IfModule mod_weblogic.c>
SetHandler weblogic-handler
WeblogicHost 192.168.100.20
WebLogicPort 8002
CookieName SAGPHSESSIONID
Debug ON
KeepAliveEnabled ON
WLSocketTimeoutSecs 5
WLLogFile "D:/Apache2.2/logs/wlproxy.log"
</IfModule>
</Location>
It works fine. http://localhost/TESTCRM load the application located on the Weblogic server.
Is there way to exclude certain directory from being loaded from weblogic server?
We want resource folder to be loaded from local apache machine.
http://localhost/TESTCRM/resource (resource folder is located on the apache htdoc folder)
How can I exclude the resource folding loading via weblogic module? Is that possible? What alternative option do I have? I am new with apache so any help will really appropriate it.
Here is wlproxy.log (error it trying to load resource from weblogic server but it getting 404 since it does not exist there)
================New Request: [GET /TESTCRM/resources/resources/css/reset-min.css HTTP/1.1] =================
Fri Oct 16 11:33:29 2009 <314012557072091> INFO: SSL is not configured
Fri Oct 16 11:33:29 2009 <314012557072091> Using Uri /TESTCRM/resources/resources/css/reset-min.css
Fri Oct 16 11:33:29 2009 <314012557072091> After trimming path: '/TESTCRM/resources/resources/css/reset-min.css'
Fri Oct 16 11:33:29 2009 <314012557072091> The final request string is '/TESTCRM/resources/resources/css/reset-min.css'
Fri Oct 16 11:33:29 2009 <314012557072091> Host extracted from serverlist is [192.168.100.20]
Fri Oct 16 11:33:29 2009 <314012557072091> Initializing lastIndex=0 for a list of length=1
Fri Oct 16 11:33:29 2009 <314012557072091> getListNode: created a new server node: id='192.168.100.20:8002' server_name='172.24.0.81', port='80'
Fri Oct 16 11:33:29 2009 <314012557072091> attempt #0 out of a max of 5
Fri Oct 16 11:33:29 2009 <314012557072091> Trying a pooled connection for '192.168.100.20/8002/8002'
Fri Oct 16 11:33:29 2009 <314012557072091> getPooledConn: No more connections in the pool for Host[192.168.100.20] Port[8002] SecurePort[8002]
Fri Oct 16 11:33:29 2009 <314012557072091> general list: trying connect to '192.168.100.20'/8002/8002 at line 2619 for '/TESTCRM/resources/resources/css/reset-min.css'
Fri Oct 16 11:33:29 2009 <314012557072091> INFO: New NON-SSL URL
Fri Oct 16 11:33:29 2009 <314012557072091> Connect returns -1, and error no set to 10035, msg 'Unknown error'
Fri Oct 16 11:33:29 2009 <314012557072091> EINPROGRESS in connect() - selecting
Fri Oct 16 11:33:29 2009 <314012557072091> Local Port of the socket is 1281
Fri Oct 16 11:33:29 2009 <314012557072091> Remote Host 192.168.100.20 Remote Port 8002
Fri Oct 16 11:33:29 2009 <314012557072091> general list: created a new connection to '192.168.100.20'/8002 for '/TESTCRM/resources/resources/css/reset-min.css', Local port:1281
Fri Oct 16 11:33:29 2009 <314012557072091> URL::parseHeaders: CompleteStatusLine set to [HTTP/1.1 404 Not Found]
Fri Oct 16 11:33:29 2009 <314012557072091> URL::parseHeaders: StatusLine set to [404 Not Found]
Fri Oct 16 11:33:29 2009 <314012557072091> parsed all headers OK
Fri Oct 16 11:33:29 2009 <314012557072091> sendResponse() : r->status = '404'
Fri Oct 16 11:33:29 2009 <314012557072091> for 192.168.100.20/8002/8002, updated JVMID: -574096105
Fri Oct 16 11:33:29 2009 <314012557072091> canRecycle: conn=1 status=404 isKA=0 clen=1214 isCTE=0
Fri Oct 16 11:33:29 2009 <314012557072091> closeConn: URL.canRecycle() returns false, deleting URL '192.168.100.20/8002'
Fri Oct 16 11:33:29 2009 <314012557072091> request [TESTCRM/resources/resources/css/reset-min.css] processed sucessfully..
Let me know if you need any other information
Thanks
Sayef

have you tried:
WLExcludePathOrMimeType /TESTCRM/resource
http://download-llnw.oracle.com/docs/cd/E15051_01/wls/docs103/plugins/plugin_params.html#wp1143055

Similar Messages

  • HTTPS Configuration question

    I've just been handed an iWS6.1 server and need to setup HTTPS. That's easy, not much different than ldap, messaging server and Portal.
    But my question is "How should I provide the HTTPS service?" From a quick read of the docs, I could do 1 of 2 things.
    1. Add a https listener to the current virtual web server: www.xyz.com
    2. Define a new virtual server and call it wwws.xyz.com
    The https service would be used to authenticate users and present pages under www.xyz.com. The big advantage I see to using wwws.xyz.com is that it would force developers to put all their https dependant code in one spot, but I could be mistaken on that assumption.
    Thanks,
    Roger S.

    First of all, there is nothing wrong with letting Outlook connect via HTTP internally as well. This is actually the direction Exchange is going (in fact, in Exchange 2013 all Outlook connectivity takes place via Outlook Anywhere).
    Second, it's a fallback mechanism and all that the option does is either attempt to connect first via RPC and then HTTP or first HTTP and then RPC.
    Third, your Internet connection speed is also irrelevant in this case since it is your network adapter speed which counts and that is most likely your local LAN speed and even higher than that.
    Anyway, to answer your question; Yes, what Outlook considers slow is configurable via the Registry.
    However, since the full answer is a bit more complex, it is a bit hard to explain it here so I turned it into a blog post:
    http://www.howto-outlook.com/howto/outlookanywherefastslow.htm
    Robert Sparnaaij
    [MVP-Outlook]
    Outlook guides and more: HowTo-Outlook.com
    Outlook Quick Tips: MSOutlook.info

  • Configuring Apache HTTP Server with Oracle Weblogic Server plugin

    Hello friends,
    I have a scenario of OIM 9.1.0.2 on Oracle Application Server 11g and Weblogic Server Apache HTTP Server.
    Oracle WebLogic Server is configured in cluster (node1 and node2), also use the Oracle Weblogic Server plugin for integration with Apache.
    One of the tests is to lose one of the nodes for the apache plugin redirects the node that has less overhead.
    When the mode is node1 and node2 stop start mode and try to access the management console of Oracle Identity Manager, the plugin sometimes redirects to the other active node, and on another occasion shows the oracle management console identity manager without the colors of the basic look and feel.
    Deputy of the Apache HTTP Server log, do you expect your comments to solve this case?
    *************************************************log****************************************************
    Server Details are:
    OrigHostInfo [192.168.1.200]
    isOrigHostInfoDNS [0]
    Host [192.168.1.200]
    Port [7002]
    SecurePort [7004]
    Mon Jan 30 22:10:43 2012 <2600713279794431> Initializing lastIndex=0 for a list of length=1
    Mon Jan 30 22:10:43 2012 <2600713279794431> initJVMID: Trying to locate Primary or Secondary using SrvrInfo with JVMID [-872106207]
    Mon Jan 30 22:10:43 2012 <2600713279794431> initJVMID: Found Primary 192.168.1.200:7002:7004
    Mon Jan 30 22:10:43 2012 <2600713279794431> INFO: Closing SSL context
    Mon Jan 30 22:10:43 2012 <2600713279794431> .....internal request /bea_wls_internal/WLDummyInitJVMIDs.....processed
    Mon Jan 30 22:10:43 2012 <2600713279794431> getPreferredFromCookie: Found 1 servers
    Mon Jan 30 22:10:43 2012 <2600713279794431> attempt #0 out of a max of 5
    Mon Jan 30 22:10:43 2012 <2600713279794431> trying connect to PRIMARY '192.168.1.200'/7002/7004
    Mon Jan 30 22:10:43 2012 <2600713279794431> getPooledConn: No more connections in the pool for Host[192.168.1.200] Port[7002] SecurePort[7004]
    Mon Jan 30 22:10:43 2012 <2600713279794431> New SSL URL: match = 0 oid = 22
    Mon Jan 30 22:10:43 2012 <2600713279794431> Connect returns -1, and error no set to 150, msg 'Operation now in progress'
    Mon Jan 30 22:10:43 2012 <2600713279794431> EINPROGRESS in connect() - selecting
    Mon Jan 30 22:10:43 2012 <2600713279794431> Setting peerID for new SSL connection
    Mon Jan 30 22:10:43 2012 <2600713279794431> 0ae2 0436 0000 1b5c ...6...\
    Mon Jan 30 22:10:43 2012 <2600713279794431> Local Port of the socket is 39186
    Mon Jan 30 22:10:43 2012 <2600713279794431> Remote Host 192.168.1.200 Remote Port 7004
    Mon Jan 30 22:10:43 2012 <2600713279794431> created a new connection to preferred server '192.168.1.200/7004' for '/xlWebApp/images/spacer.gif', Local port:39186
    Mon Jan 30 22:10:43 2012 <2600713279794431> INFO: CA certificate missing basicConstraints, validation failed
    Mon Jan 30 22:10:43 2012 <2600713279794431> ERROR: SSLWrite failed
    Mon Jan 30 22:10:43 2012 <2600713279794431> SEND failed (ret=-1) at 793 of file ../nsapi/URL.cpp
    Mon Jan 30 22:10:43 2012 <2600713279794431> *******Exception type [WRITE_ERROR_TO_SERVER] raised at line 794 of ../nsapi/URL.cpp
    Mon Jan 30 22:10:43 2012 <2600713279794431> Marking 192.168.1.200:7004 as bad
    Mon Jan 30 22:10:43 2012 <2600713279794431> got exception in sendRequest phase: WRITE_ERROR_TO_SERVER [os error=0,  line 794 of ../nsapi/URL.cpp]: at line 3160
    Mon Jan 30 22:10:43 2012 <2600713279794431> INFO: Closing SSL context
    Mon Jan 30 22:10:43 2012 <2598413279794431>
    ================New Request: [GET /images/cab.gif HTTP/1.1] =================
    Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: SSL is configured
    Mon Jan 30 22:10:43 2012 <2598413279794431> SSL Main Context not set. Calling InitSSL
    Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: SSL configured successfully
    Mon Jan 30 22:10:43 2012 <2598413279794431> Using Uri /images/cab.gif
    Mon Jan 30 22:10:43 2012 <2598413279794431> After trimming path: '/images/cab.gif'
    Mon Jan 30 22:10:43 2012 <2598413279794431> adding prepend path: /xlWebApp/
    Mon Jan 30 22:10:43 2012 <2598413279794431> The final request string is '/xlWebApp/images/cab.gif'
    Mon Jan 30 22:10:43 2012 <2598413279794431> Host extracted from serverlist is [192.168.1.100]
    Mon Jan 30 22:10:43 2012 <2598413279794431> Host extracted from serverlist is [192.168.1.200]
    Mon Jan 30 22:10:43 2012 <2598413279794431> Initializing lastIndex=0 for a list of length=2
    Mon Jan 30 22:10:43 2012 <2598413279794431> getListNode: created a new server node: id='192.168.1.100:7004,192.168.1.200:7004' server_name='OIMSERVER', port='443'
    Mon Jan 30 22:10:43 2012 <2598413279794431> getPreferred: availcookie=[JSESSIONID=6RGCPnbTFRG7LBrTRpFnv1QLnQHkxkqr4pjGhhGJyrJWJ1rv86NK!-872106207!NONE]
    Mon Jan 30 22:10:43 2012 <2598413279794431> Found cookie from cookie header: JSESSIONID=6RGCPnbTFRG7LBrTRpFnv1QLnQHkxkqr4pjGhhGJyrJWJ1rv86NK!-872106207!NONE
    Mon Jan 30 22:10:43 2012 <2598413279794431> Parsing cookie JSESSIONID=6RGCPnbTFRG7LBrTRpFnv1QLnQHkxkqr4pjGhhGJyrJWJ1rv86NK!-872106207!NONE
    Mon Jan 30 22:10:43 2012 <2598413279794431> getpreferredServersFromCookie: [-872106207!NONE]
    Mon Jan 30 22:10:43 2012 <2598413279794431> primaryJVMID: [-872106207]
    secondaryJVMID: [NONE]
    Mon Jan 30 22:10:43 2012 <2598413279794431> No of JVMIDs found in cookie: 1
    Mon Jan 30 22:10:43 2012 <2598413279794431> getPreferredFromCookie: Start Position is 0, listLen is 2
    Mon Jan 30 22:10:43 2012 <2598413279794431> getPreferredFromCookie: Either JVMIDs not set or they are stale. Will try to get JVMIDs from WLS
    Mon Jan 30 22:10:43 2012 <2598413279794431> initJVMID: Iterating SrvrList from position 0
    Mon Jan 30 22:10:43 2012 <2598413279794431> ======internal request /bea_wls_internal/WLDummyInitJVMIDs======
    initJVMID: Trying Host[192.168.1.100] Port[7004] SecurePort[7004] useSSL [1] ioTimeout [30] socketTimeout [2]
    Mon Jan 30 22:10:43 2012 <2598413279794431> New SSL URL: match = 0 oid = 0
    Mon Jan 30 22:10:43 2012 <2598413279794431> Connect returns -1, and error no set to 146, msg 'Connection refused'
    Mon Jan 30 22:10:43 2012 <2598413279794431> Error connecting to host 192.168.1.100:7004
    Mon Jan 30 22:10:43 2012 <2598413279794431> *******Exception type [CONNECTION_REFUSED] (Error connecting to host 192.168.1.100:7004 errno = 146) raised at line 1723 of ../nsapi/URL.cpp
    Mon Jan 30 22:10:43 2012 <2598413279794431> initJVMID: Failed to retrieved JVMID for 192.168.1.100:7004:7004
    Mon Jan 30 22:10:43 2012 <2598413279794431> initJVMID: Marked server as BAD
    Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: Closing SSL context
    Mon Jan 30 22:10:43 2012 <2598413279794431> .....internal request /bea_wls_internal/WLDummyInitJVMIDs.....processed
    Mon Jan 30 22:10:43 2012 <2598413279794431> ======internal request /bea_wls_internal/WLDummyInitJVMIDs======
    initJVMID: Trying Host[192.168.1.200] Port[7004] SecurePort[7004] useSSL [1] ioTimeout [30] socketTimeout [2]
    Mon Jan 30 22:10:43 2012 <2598413279794431> New SSL URL: match = 0 oid = 0
    Mon Jan 30 22:10:43 2012 <2598413279794431> Connect returns -1, and error no set to 150, msg 'Operation now in progress'
    Mon Jan 30 22:10:43 2012 <2598413279794431> EINPROGRESS in connect() - selecting
    Mon Jan 30 22:10:43 2012 <2598413279794431> Setting peerID for new SSL connection
    Mon Jan 30 22:10:43 2012 <2598413279794431> 0ae2 0436 0000 1b5c ...6...\
    Mon Jan 30 22:10:43 2012 <2598413279794431> Local Port of the socket is 39188
    Mon Jan 30 22:10:43 2012 <2598413279794431> Remote Host 192.168.1.200 Remote Port 7004
    Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: Certificate validation succeeded
    Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: Negotiated to cipher: 3
    Mon Jan 30 22:10:43 2012 <2598413279794431> SSLWrite sent 171
    Mon Jan 30 22:10:43 2012 <2598413279794431> SSLWrite completed, sent 171
    Mon Jan 30 22:10:43 2012 <2598413279794431> Reader::fill() SSLRead returned: 0 290
    Mon Jan 30 22:10:43 2012 <2598413279794431> URL::parseHeaders: CompleteStatusLine set to [HTTP/1.1 404 Not Found]
    Mon Jan 30 22:10:43 2012 <2598413279794431> URL::parseHeaders: StatusLine set to [404 Not Found]
    Mon Jan 30 22:10:43 2012 <2598413279794431> parsed all headers OK
    Mon Jan 30 22:10:43 2012 <2598413279794431> Parsing cluster list: -872106207!182584374!7002!7004
    Mon Jan 30 22:10:43 2012 <2598413279794431> parseJVMID: Parsing JVMID '-872106207!182584374!7002!7004'
    Mon Jan 30 22:10:43 2012 <2598413279794431> parseJVMID: Actually parsing '-872106207!182584374!7002!7004'
    Mon Jan 30 22:10:43 2012 <2598413279794431> ServerInfo struct for JVMID '-872106207' populated
    Server Details are:
    OrigHostInfo [192.168.1.200]
    isOrigHostInfoDNS [0]
    Host [192.168.1.200]
    Port [7002]
    SecurePort [7004]
    Mon Jan 30 22:10:43 2012 <2598413279794431> Initializing lastIndex=0 for a list of length=1
    Mon Jan 30 22:10:43 2012 <2598413279794431> initJVMID: Trying to locate Primary or Secondary using SrvrInfo with JVMID [-872106207]
    Mon Jan 30 22:10:43 2012 <2598413279794431> initJVMID: Found Primary 192.168.1.200:7002:7004
    Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: Closing SSL context
    Mon Jan 30 22:10:43 2012 <2598413279794431> .....internal request /bea_wls_internal/WLDummyInitJVMIDs.....processed
    Mon Jan 30 22:10:43 2012 <2598413279794431> getPreferredFromCookie: Found 1 servers
    Mon Jan 30 22:10:43 2012 <2598413279794431> attempt #0 out of a max of 5
    Mon Jan 30 22:10:43 2012 <2598413279794431> trying connect to PRIMARY '192.168.1.200'/7002/7004
    Mon Jan 30 22:10:43 2012 <2598413279794431> getPooledConn: No more connections in the pool for Host[192.168.1.200] Port[7002] SecurePort[7004]
    Mon Jan 30 22:10:43 2012 <2598413279794431> New SSL URL: match = 0 oid = 22
    Mon Jan 30 22:10:43 2012 <2598413279794431> Connect returns -1, and error no set to 150, msg 'Operation now in progress'
    Mon Jan 30 22:10:43 2012 <2598413279794431> EINPROGRESS in connect() - selecting
    Mon Jan 30 22:10:43 2012 <2598413279794431> Setting peerID for new SSL connection
    Mon Jan 30 22:10:43 2012 <2598413279794431> 0ae2 0436 0000 1b5c ...6...\
    Mon Jan 30 22:10:43 2012 <2598413279794431> Local Port of the socket is 39189
    Mon Jan 30 22:10:43 2012 <2598413279794431> Remote Host 192.168.1.200 Remote Port 7004
    Mon Jan 30 22:10:43 2012 <2598413279794431> created a new connection to preferred server '192.168.1.200/7004' for '/xlWebApp/images/cab.gif', Local port:39189
    Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: CA certificate missing basicConstraints, validation failed
    Mon Jan 30 22:10:43 2012 <2598413279794431> ERROR: SSLWrite failed
    Mon Jan 30 22:10:43 2012 <2598413279794431> SEND failed (ret=-1) at 793 of file ../nsapi/URL.cpp
    Mon Jan 30 22:10:43 2012 <2598413279794431> *******Exception type [WRITE_ERROR_TO_SERVER] raised at line 794 of ../nsapi/URL.cpp
    Mon Jan 30 22:10:43 2012 <2598413279794431> Marking 192.168.1.200:7004 as bad
    Mon Jan 30 22:10:43 2012 <2598413279794431> got exception in sendRequest phase: WRITE_ERROR_TO_SERVER [os error=0,  line 794 of ../nsapi/URL.cpp]: at line 3160
    Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: Closing SSL context
    Thanks

    "One of the tests is to lose one of the nodes for the apache plugin redirects the node that has less overhead."
    Note that the plug-in does a round robin load balancing, for example, in the case of three server (1,2,3) it does 1-2-3-1-2-3-1...
    with server 3 going down it does 1-2-1-2-1...
    An example configuration (with SSL off) looks as follows:
    LoadModule weblogic_module   "/home/oracle/weblogic12.1.1/apache/modules/mod_wl.so"
    <IfModule weblogic_module>
         ConnectTimeoutSecs 10
         ConnectRetrySecs 2
         DebugConfigInfo ON
         WLSocketTimeoutSecs 2
         WLIOTimeoutSecs 300
         Idempotent ON
         FileCaching ON
         KeepAliveSecs 20
         KeepAliveEnabled ON
         DynamicServerList ON
         WLProxySSL OFF
    </IfModule>
    <Location /LoadTest6>
         SetHandler weblogic-handler
         WebLogicCluster 172.31.0.175:7002,172.31.0.113:7003
    </Location>Also see the complete example here: http://middlewaremagic.com/weblogic/?p=7795
    "the plugin sometimes redirects to the other active node"
    This is somewhat strange, do you have session binding turned off?
    "and on another occasion shows the oracle management console identity manager without the colors of the basic look and feel."
    This could happen due to mime types (not really sure just a hunch). Here is a general story on this concept: https://developer.mozilla.org/en/Properly_Configuring_Server_MIME_Types
    and the apache module: http://httpd.apache.org/docs/2.2/mod/mod_mime.html

  • Configuring Apache HTTP as an RPS to weblogic for SSO on PSFT

    Longback i configured Apache HTTP as an Reverse proxy to weblogic for singlesignon with OAM.
    that time i downloaded the Apache HTTP server Plugin from the below link
    http://e-docs.bea.com/wls/docs92/plugins/apache.html
    but after oracle aquiring the oracle i can not able to find the link for Apache plugin .
    can any one please upadte the new url to download APACHE HTTP server plugin

    It seems the WebLogic Server plug-ins for Apache web server are available for download only through My Oracle Support (MetaLink)
    Check below:
    http://www.oracle.com/technology/deploy/security/wls-security/2793.html
    The page mentions that the web server plug-in is available for download via Doc ID # 7825156.
    You can also have a look at http://www.oracle.com/technology/deploy/security/alerts/alert_cve2008-3257.html
    Hope this helps.

  • Installing and Configuring the Apache HTTP Server Plug-In

    Hi,
    I am using WL10.3 in Linux machine.
    I have an environment where I have a single WL server in a domain that is deployed with the web-application
    And I have another domain where I have two managed servers in a cluster that is deployed with the business.
    Now, I want to configure a Apache HTTP server to make it work as a proxy along with the weblogic.
    In my current scenario, the stand alone server proxies the req to the cluster and that is defined in a jndi.properties.
    Now, what should I do if I want to use the Apache
    I have the following questions:
    1. Forget about my env, generally how can I install and configure Apache HTTP plug-in?
    I see we already having libproxy_61.so file inside /bea/wlserver_10.3/server/plugin/linux/i686
    Do i need to install the patch even then as told in http://www.oracle.com/technology/deploy/security/wls-security/2793.html?
    2. While am adding the lines in httpd.conf ,
    LoadModule weblogic_module modules/mod_wl_22.so
    Should I put ibproxy_61.so instead of mod_wl_22.so in this line?
    3. Just by configuring the proxy, the session replication and load balancing will be ensured?
    4.And for my configuration as stated at the beginning few lines, what can be the best architecture?
    Your help is really appreciated.

    Hi,
    Below blog would give you a clear understanding of the Integrating Apache with Weblogic. All your questions are been answered in the below blog.
    http://www.prasannatech.net/2008/07/integrating-apache-tomcat-weblogic.html
    You can for sure apply the patch provided in CVE-2008-3257).
    Keep posted with your findings and let us know if you need any further clarification.
    Regards,
    Hussain

  • Configuring Apache HTTP as an RPS

    Longback i configured Apache HTTP as an Reverse proxy to weblogic for singlesignon with OAM.
    that time i downloaded the Apache HTTP server Plugin from the below link
    http://e-docs.bea.com/wls/docs92/plugins/apache.html
    but after oracle aquiring the oracle i can not able to find the link for Apache plugin .
    can any one please upadte the new url to download APACHE HTTP server plugin

    Hi,
    You can download the latest apache plugins from the below link.
    http://www.oracle.com/technology/software/products/ias/htdocs/wls_main.html
    Click on the "see all files" options of the Oracle WebLogic Server 10.3, and you can download the same under the
    Mandatory for 10.3 installers.
    Cheers,
    Raj

  • Apache Configuration Question

    Simple question:
    I'm doing a one-off PHP/MySQL application where everything runs locally. Firewall activated, so I'm not too worried about security. :-/ Apache is configured as included with Tiger. Using Marc Lianage's PHP binary. MySQL is 5.0.
    Here the rub: I have a bunch of images in /Users/MyDir/Images that I want to access from HTML pages being served from /Library/WebServer/Documents/Dir/Path/prog.php.
    This is what I added right under the <Directory /> block (under, not in) in httpd.conf:
    <pre>
    <Directory /Users/MyUser/Images>
    Order allow,deny
    Allow from all
    </Directory>
    </pre>
    Horribly insecure. I know. The problem is that these files aren't being served. The HTML is fine, but nothing is rendered. Is my directive correct? Is there something else I'm missing?
    Thanks,
    Mark
    P.S. I couldn't find a high-traffic Usenet group for this question--any suggestions?
    Message was edited by: chollapete for formatting.

    Gnarlodious for the win!
    I'll just recap the fix for anyone who searches after me:
    The way I read the apache.org documentation, being able to access directories and files not under the Apache Documents root seems to require both the Alias directive and the Directory directive in the httpd.conf configuration file.
    It also requires that the entire filepath be have *nix file permissions set so the Apache user has permission to access the entire actual pathname. Experimentation showed that all directories in the pathname have to have both read and execute permissions set. Since Apache as configured by Apple runs as a different user and group than you, all directories in the pathname must be world-readable and world-executable.
    However, when I commented out the <Directory> block shown below, it still worked the way I wanted. So, maybe you just need the Alias directive.
    I'm certainly no Unix guru and everything I'm doing runs locally behind a firewall, so know what you're doing if you use this information. :-/
    Here's the recap of what I added to httpd.conf:
    <pre>
    Alias /image_dir /Users/MyDir/SubDir
    #<Directory /Users/MyDir/SubDir>
    #Options Indexes FollowSymLinks MultiViews
    #AllowOverride None
    #Order allow,deny
    #Allow from all
    #</Diretory>
    </pre>
    This was placed immediately after the <Directory "/Library/WebServer/Documents"> block that is part of the as-shipped configuration file. This, and the aforementioned changes to make the actual filepath accessible to the apache process.
    HTH. Use at your own risk!
    Peace out.

  • WebLogic Apache bridge problems on uploading large files via HTTP post

    I have a problem uploading files larger than quarter a mega, the jsp
    page does a POST
    to a servlet which reads the input stream and writes to a file.
    Configuration: Apache webserver 1.3.12 connected to the Weblogic 5.1
    application server
    via the bridge(mod_wl_ssl.so) from WebLogic Service pack 4.
    The upload goes on for about 30 secs and throws the following error.
    "Failure of WebLogic APACHE bridge:
    IO error writing POST data to 100.12.1.2:7001; sys err#: [32] sys err
    msg [Broken pipe]
    Build date/time: Jul 10 2000 12:29:18 "
    The same upload(in fact I uploaded a 8 MEG file) using the
    Netscape(NSAPI) WebLogic
    connector.
    Any answers would be deeply appreciated.

    I have a problem uploading files larger than quarter a mega, the jsp
    page does a POST
    to a servlet which reads the input stream and writes to a file.
    Configuration: Apache webserver 1.3.12 connected to the Weblogic 5.1
    application server
    via the bridge(mod_wl_ssl.so) from WebLogic Service pack 4.
    The upload goes on for about 30 secs and throws the following error.
    "Failure of WebLogic APACHE bridge:
    IO error writing POST data to 100.12.1.2:7001; sys err#: [32] sys err
    msg [Broken pipe]
    Build date/time: Jul 10 2000 12:29:18 "
    The same upload(in fact I uploaded a 8 MEG file) using the
    Netscape(NSAPI) WebLogic
    connector.
    Any answers would be deeply appreciated.

  • Weblogic apache plugin and webservices

    Can I use the weblogic plugin on a DMZ based Apache server and use a 3 tier architecture
    to implement webservices.
    Using this model can a external application contact my webservices running in
    my internal network and can my weblogic/webservices server contact an external
    application/webservices using the same route i.e through the apache webserver
    and weblogic plugin.
    Any documentation regarding the architecture?

    Hi Anil,
    Not sure this is possible, unless you are using it as a proxy and setup
    the proper host/port mappings, see:
    http://edocs.bea.com/wls/docs81/webserv/client.html#1072224
    We have a very responsive security newsgroup, you might ask your
    configuration question there:
    http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=xover&group=weblogic.developer.interest.security&utag=
    Sorry, not much help (SNMH)
    Bruce
    Anil Jacob wrote:
    >
    Can I use the weblogic plugin on a DMZ based Apache server and use a 3 tier architecture
    to implement webservices.
    Using this model can a external application contact my webservices running in
    my internal network and can my weblogic/webservices server contact an external
    application/webservices using the same route i.e through the apache webserver
    and weblogic plugin.
    Any documentation regarding the architecture?

  • Weblogic Apache Plugins -Put/Delete Method

    Hi ,
    I need to find out if the weblogic plugin Apache supports the use of http PUT and DELETE operations (instead of GET and POST) and if so I need an example plugin configuration where the clients are using the "PUT" and "DELETE" operations. And, again assuming the plugin supports PUT and DELETE, are there any known issues with there use in conjunction with the plugin.

    Hi ,
    Here is the details about the HTTP Put/Delete Protocol :-
    Supported :-
    HTTP Put and Delete Protocol is supported in Weblogic and Weblogic Apache Plugin .
    In Apache also these protocols are supported .
    Configuration :-
    If you want to configure it older version of Apache we have to use the (WebDav) of the apache .But you don't have do anything for newer version
    as this module should be there and we have to do only configuration for Apache for this module .
    Configuration of WebDab is here in newer version of Apache:-
    http://www.serverwatch.com/tutorials/article.php/2176771/Enabling-WebDAV-on-Apache.htm
    We don't have to do anything on Weblogic and Apache Weblogic Plugin side .As by default they support these protocols.
    Usage :-
    I tested this in my environment by sending a Put request to Weblogic Plugin using the Tool called "Fiddler".
    I sent a request to Weblogic Plugin using this tool and it works . Even i checked on the Apache plugin log files also that it works.
    There is good note from apache how to use the Put/Delete function in Apache .
    Please follow this link for usage for Put/Delete for Apache for uploading files to server . How this make life easy .
    http://www.apacheweek.com/features/put
    http://stackoverflow.com/questions/1051004/how-to-send-put-delete-http-request-in-httpurlconnection
    Security Risk :-
    Please keep in mind that there is security risk when we use this protocol which is clearly explain in the note when we use this in the example above.
    Here is a nice article also which explains the security concerns of Put :-
    https://www.golemtechnologies.com/articles/http-put-security
    Tested hitting localhost/console
    Edited the request header GET /console/login/LoginForm.jsp HTTP/1.1 to PUT /console/login/LoginForm.jsp HTTP/1.1
    Got the following in the apache log file
    ================New Request: [PUT /console/ HTTP/1.1] =================
    Wed May 29 19:24:35 2013 <608013698698758> INFO: SSL is not configured
    Wed May 29 19:24:35 2013 <608013698698758> Using Uri /console/
    Wed May 29 19:24:35 2013 <608013698698758> After trimming path: '/console/'
    Wed May 29 19:24:35 2013 <608013698698758> The final request string is '/console/'
    Wed May 29 19:24:35 2013 <608013698698758> SEARCHING id=[10.157.153.243:7001] from current ID=[10.157.153.243:7001]
    Wed May 29 19:24:35 2013 <608013698698758> The two ids matched
    Wed May 29 19:24:35 2013 <608013698698758> @@@FOUND...id=[10.157.153.243:7001], server_name=[localhost], server_port=[80]
    Wed May 29 19:24:35 2013 <608013698698758> attempt #0 out of a max of 5
    Wed May 29 19:24:35 2013 <608013698698758> Trying a pooled connection for '10.157.153.243/7001/7001'
    Wed May 29 19:24:35 2013 <608013698698758> getPooledConn: No more connections in the pool for Host[10.157.153.243] Port[7001] SecurePort[7001]
    Wed May 29 19:24:35 2013 <608013698698758> general list: trying connect to '10.157.153.243'/7001/7001 at line 2716 for '/console/'
    Wed May 29 19:24:35 2013 <608013698698758> INFO: New NON-SSL URL
    Wed May 29 19:24:35 2013 <608013698698758> Connect returns -1, and error no set to 10035, msg 'Unknown error'
    Wed May 29 19:24:35 2013 <608013698698758> EINPROGRESS in connect() - selecting
    Wed May 29 19:24:35 2013 <608013698698758> Local Port of the socket is 3175
    Wed May 29 19:24:35 2013 <608013698698758> Remote Host 10.157.153.243 Remote Port 7001
    Wed May 29 19:24:35 2013 <608013698698758> general list: created a new connection to '10.157.153.243'/7001 for '/console/', Local port:3175
    Wed May 29 19:24:35 2013 <608013698698758> Hdrs from clnt:[Host]=[localhost]
    Wed May 29 19:24:35 2013 <608013698698758> Hdrs from clnt:[Connection]=[keep-alive]
    Wed May 29 19:24:35 2013 <608013698698758> Hdrs from clnt:[Accept]=[text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8]
    Wed May 29 19:24:35 2013 <608013698698758> Hdrs from clnt:[User-Agent]=[Mozilla/5.0 (Windows NT 5.1) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/27.0.1453.94 Safari/537.36]
    Wed May 29 19:24:35 2013 <608013698698758> Hdrs from clnt:[Accept-Encoding]=[gzip,deflate,sdch]
    Wed May 29 19:24:35 2013 <608013698698758> Hdrs from clnt:[Accept-Language]=[en-US,en;q=0.8]
    Wed May 29 19:24:35 2013 <608013698698758> Hdrs from clnt:[Cookie]=[ADMINCONSOLESESSION=yQ7GRmLfKBhHdJrQ55t4X2v9y0v1NZCGj5qtfQdshz6w87nPc4nW!419247034]
    Wed May 29 19:24:35 2013 <608013698698758> URL::sendHeaders(): meth='PUT' file='/console/' protocol='HTTP/1.1'
    Wed May 29 19:24:35 2013 <608013698698758> Hdrs to WLS:[Host]=[localhost]
    Wed May 29 19:24:35 2013 <608013698698758> Hdrs to WLS:[Accept]=[text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8]
    Wed May 29 19:24:35 2013 <608013698698758> Hdrs to WLS:[User-Agent]=[Mozilla/5.0 (Windows NT 5.1) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/27.0.1453.94 Safari/537.36]
    Wed May 29 19:24:35 2013 <608013698698758> Hdrs to WLS:[Accept-Encoding]=[gzip,deflate,sdch]
    Wed May 29 19:24:35 2013 <608013698698758> Hdrs to WLS:[Accept-Language]=[en-US,en;q=0.8]
    Wed May 29 19:24:35 2013 <608013698698758> Hdrs to WLS:[Cookie]=[ADMINCONSOLESESSION=yQ7GRmLfKBhHdJrQ55t4X2v9y0v1NZCGj5qtfQdshz6w87nPc4nW!419247034]
    Wed May 29 19:24:35 2013 <608013698698758> Hdrs to WLS:[Connection]=[Keep-Alive]
    Wed May 29 19:24:35 2013 <608013698698758> Hdrs to WLS:[WL-Proxy-SSL]=[false]
    Wed May 29 19:24:35 2013 <608013698698758> Hdrs to WLS:[WL-Proxy-Client-IP]=[127.0.0.1]
    Wed May 29 19:24:35 2013 <608013698698758> Hdrs to WLS:[Proxy-Client-IP]=[127.0.0.1]
    Wed May 29 19:24:35 2013 <608013698698758> Hdrs to WLS:[X-Forwarded-For]=[127.0.0.1]
    Wed May 29 19:24:35 2013 <608013698698758> Hdrs to WLS:[X-WebLogic-KeepAliveSecs]=[30]
    Wed May 29 19:24:35 2013 <608013698698758> Hdrs to WLS:[X-WebLogic-Force-JVMID]=[419247034]
    Wed May 29 19:24:35 2013 <608013698698758> URL::parseHeaders: CompleteStatusLine set to [HTTP/1.1 302 Moved Temporarily]
    Wed May 29 19:24:35 2013 <608013698698758> URL::parseHeaders: StatusLine set to [302 Moved Temporarily]
    Wed May 29 19:24:35 2013 <608013698698758> Hdrs from WLS:[Connection]=[close]
    Wed May 29 19:24:35 2013 <608013698698758> Hdrs from WLS:[Date]=[Wed, 29 May 2013 23:24:35 GMT]
    Wed May 29 19:24:35 2013 <608013698698758> Hdrs from WLS:[Transfer-Encoding]=[chunked]
    Wed May 29 19:24:35 2013 <608013698698758> Hdrs from WLS:[Location]=[http://localhost/console/console.portal?_nfpb=true]
    Wed May 29 19:24:35 2013 <608013698698758> Hdrs from WLS:[Content-Type]=[text/html; charset=UTF-8]
    Wed May 29 19:24:35 2013 <608013698698758> Hdrs from WLS:[X-WebLogic-JVMID]=[419247034]
    Wed May 29 19:24:35 2013 <608013698698758> Hdrs from WLS:[X-Powered-By]=[Servlet/2.5 JSP/2.1]
    Wed May 29 19:24:35 2013 <608013698698758> parsed all headers OK
    Wed May 29 19:24:35 2013 <608013698698758> sendResponse() : r->status = '302'
    Wed May 29 19:24:35 2013 <608013698698758> Hdrs to client (add):[Date]=[Wed, 29 May 2013 23:24:35 GMT]
    Wed May 29 19:24:35 2013 <608013698698758> Hdrs to client (add):[Location]=[http://localhost/console/console.portal?_nfpb=true]
    Wed May 29 19:24:35 2013 <608013698698758> Hdrs to client (add):[X-Powered-By]=[Servlet/2.5 JSP/2.1]
    Wed May 29 19:24:35 2013 <608013698698758> canRecycle: conn=1 status=302 isKA=0 clen=-1 isCTE=1
    Wed May 29 19:24:35 2013 <608013698698758> closeConn: URL.canRecycle() returns false, deleting URL '10.157.153.243/7001'
    Wed May 29 19:24:35 2013 <608013698698758> request [console/] processed successfully..................
    Regards
    Sahil Soni
    ------------------------------------------------------------------------------------------------------------------------------

  • Setting up the Apache HTTP Plugin for several BEA Servers

    Hey together,
    i would like to setup the apache http plugin for several bea-servers.
    I am running apache 1.x on my hp-ux system. There are 2 bea-server-domains on this box and both should be proxied by the plugin simultaneously.
    As far as i know it isn't possible to run 2 or more instances of the apache webserver. I heard of virtualhosts, maybe i should try this one out.
    Somebody knows how to deal with this problem or does any1 know if virtualhosts could cope with my needs?
    Thanks in advance

    Ok here i am again and i'm stuck. Here my wishes again:
    there are 2 weblogic-instances (domains) running on a machine xxx, instance A listening on port 8041, instance B listening on port 8051. I want to configure apache virtualhosts in combination with weblogic plugins, so that request with /ld will be sent to instance A while requests with /ldd will be sent to instance B. Both are no clusters. Therefore i tried it with the following configuration (httpd.conf):
    <VirtualHost xxx:8080>
         DocumentRoot "/opt/hpws/apache/htdocs"
         ServerName xxx:8080
         <IfModule mod_weblogic.c>
         WebLogicHost xxx
         WebLogicPort 8041
         #MatchExpression *
         #PathPrepend=/test2
         </IfModule>
         <Location /ld>
         SetHandler weblogic-handler
         PathTrim /ld
         </Location>
    </VirtualHost>
    # VirtualHost2 = xxx:8090
    <VirtualHost xxx:8090>
         DocumentRoot "/opt/hpws/apache/htdocs"
         ServerName xxx:8090
         <IfModule mod_weblogic.c>
         WebLogicHost xxx
         WebLogicPort 8051
         #MatchExpression *
         #PathPrepend=/test2
         </IfModule>
         <Location /ldd>
         SetHandler weblogic-handler
         PathTrim /ldd
         </Location>
    Doesnt really work. Can some1 help please?
    Thanks

  • Apache HTTP proxying for load balancing only to a group of non-clustered WL servers

              Hi,
              We're running WL Server 6.1 SP 2 on Solaris 2.8.
              For the Apache HTTP proxy plugin, if you use the WebLogicCluster http.conf option,
              do the WL servers you want to load balance across have to be part of a WebLogic
              cluster (if you are prepared to do without failover, as I know it would need to be
              a proper WL cluster to replicate session info for failover). Can you load balance
              across a group of non-clustered WL servers, and maintain the user session to the
              one WL server so that it doesn't switch between servers on alternate requests for
              the same user session, or must the servers be configured as a WebLogic cluster?
              Paul
              We find that if you have a collection of WL servers that are not configured as a
              cluster, that it will load balance alternate requests to each server, but it will
              not pin a user to a single machine according to their session so for 2 servers, 2
              differetn sessions get created, one on each machine.
              Is this because it doesn't normally do this, but sends the user alternately to a
              primary then secondary which works in a cluster because the session is replicated.
              I thought the secondary was only used when the primary failed.
              

    We're running WL Server 6.1 SP 2 on Solaris 2.8.          >
              > For the Apache HTTP proxy plugin, if you use the WebLogicCluster http.conf
              option,
              > do the WL servers you want to load balance across have to be part of a
              WebLogic
              > cluster (if you are prepared to do without failover, as I know it would
              need to be
              > a proper WL cluster to replicate session info for failover). Can you load
              balance
              > across a group of non-clustered WL servers, and maintain the user session
              to the
              > one WL server so that it doesn't switch between servers on alternate
              requests for
              > the same user session, or must the servers be configured as a WebLogic
              cluster?
              You don't have to use the clustering option. To get failover, you'll have to
              use the JDBC persistence option of WL.
              > We find that if you have a collection of WL servers that are not
              configured as a
              > cluster, that it will load balance alternate requests to each server, but
              it will
              > not pin a user to a single machine according to their session so for 2
              servers, 2
              > differetn sessions get created, one on each machine.
              >
              > Is this because it doesn't normally do this, but sends the user
              alternately to a
              > primary then secondary which works in a cluster because the session is
              replicated.
              > I thought the secondary was only used when the primary failed.
              The primary/secondary stuff requires clustering. If Apache continues to
              "load balance" after the first request, you need to either use JDBC session
              persistence or use a different load balancer (like mod_jk for Apache or a
              h/w load balancer with support for sticky).
              Peace,
              Cameron Purdy
              Tangosol, Inc.
              http://www.tangosol.com/coherence.jsp
              Tangosol Coherence: Clustered Replicated Cache for Weblogic
              "Paul Hammond" <[email protected]> wrote in message
              news:[email protected]...
              >
              

  • Problems using 4096 bit SSL certificate with WebLogic Apache 2.2 plug-in

    Hi,
    'm using WebLogic 9.2 MP3 and Apache HTTP Server (version 2.2) Plug-In. For security reasons, I have SSL installed on both Apache and WebLogic. So Apache must communicate with WebLogic via https.
    I get the following error when attempting to access WebLogic via Apache:
    Internet Explorer cannot display the webpage
    These are the last lines in wlproxy log:
    Fri Feb 26 14:08:59 2010 <71212672221392> INFO: SSL is configured
    Fri Feb 26 14:08:59 2010 <71212672221392> SSL Main Context not set. Calling InitSSL
    Fri Feb 26 14:08:59 2010 <71212672221331> INFO: Initializing SSL library
    I've found that the problem is caused by using a 4096 bit intermediate cert. When I include this 4096 bit cert in the file referenced by plugin parameter "TrustedCAFile", it is unable to load it. I've tested 4096 bit certs from a few different certificate authorities, and consistently see this problem, so I know the problem is not related to the specific certificate. If I use a 2048 bit intermediate certificate, everything works perfectly fine.
    Do you know if there are limitations to the certificate length that the plug-in can use?

    Yes 4096 bit Certificates are not supported by the plugin.
    You can use up to 2048 bit.
    There is a Bug which clearly mentions it.
    I dont remember the Bug Number, but an Oracle Support person will be able to tell you.
    Hope this helps.
    Faisal Khan
    Edited by: Faisal Khan on Feb 27, 2010 2:08 PM

  • Apache HTTP Server Plug-In for HPUX

    First action:
    Installation of
    BEA Weblogic Server 6.1 Servicepack 4
    Apache Webserver Version 2.0.43
    gcc 3.0.2
    on
    HP-UX hansapp4 B.11.11 U 9000/800
    Apache Webserver can be started !
    Aditional Action:
    Installation of BEA's Apache HTTP Server Plug-In
    as a dynamic shared object:
    Copy of mod_wl_20.so to APACHE_HOME/modules
    Adaption of httpd.conf by adding line
    "LoadModule weblogic_module modules/mod_wl_20.so"
    Result:
    Apache Webserver cannot be started !
    Start of
    root@hansapp4:/usr/local/apache2/bin> ./apachectl configtest
    gives:
    Syntax error on line 234 of /usr/local/apache2/conf/httpd.conf:
    Cannot load /usr/local/apache2/modules/mod_wl_20.so into server:
    Call to mmap() failed - TEXT /usr/local/apache2/modules/mod_wl_20.so

    While the question is for AS 8, you can try this (mod_proxy-based):
    http://docs.sun.com/source/817-3652-10/agplugin.html#wp34000
    -Alexis

  • Installing the Apache HTTP Server Plug-In as a Dynamic Shared Object

    My environment is: Windows 2000 Server SP3 + Apache 2.0.45 + WebLogic 7.0 SP2
    I followed the install guide.
    1. Locate the shared object file for your platform. >>> No problem
    2. Enable the shared object. >>> No problem
    3. Install the Apache HTTP Server Plug-In in the Apache server with a support
    program called apxs (APache eXtenSion) that builds DSO-based modules outside of
    the Apache source tree, and adds the following line to the httpd.conf file:
    >>> I don't know how to do this. where can I find apxs,
    >>> and should I add "AddModule mod_so.c" in httpd.conf
    >>> I did it, but Apache -t tell me:
    >>> Syntax error on line 173 of D:/Program/Apache/Apache2/conf/httpd.conf:
    Invalid command 'AddModule', perhaps mis-spelled or defined by a module not incl
    uded in the server configuration
    I don't understand the 4th step, where can I find 'perl' and how to use it?
    thanks.

    For Apache 2.x I think you use LoadModule instead of AddModule. That's what
    the docs say anyway.
    "muli" <[email protected]> wrote in message
    news:3ed558aa$[email protected]..
    >
    My environment is: Windows 2000 Server SP3 + Apache 2.0.45 + WebLogic 7.0SP2
    >
    I followed the install guide.
    1. Locate the shared object file for your platform. >>> No problem
    2. Enable the shared object. >>> No problem
    3. Install the Apache HTTP Server Plug-In in the Apache server with asupport
    program called apxs (APache eXtenSion) that builds DSO-based modulesoutside of
    the Apache source tree, and adds the following line to the httpd.conffile:
    I don't know how to do this. where can I find apxs,
    and should I add "AddModule mod_so.c" in httpd.conf
    I did it, but Apache -t tell me:
    Syntax error on line 173 ofD:/Program/Apache/Apache2/conf/httpd.conf:
    Invalid command 'AddModule', perhaps mis-spelled or defined by a modulenot incl
    uded in the server configuration
    I don't understand the 4th step, where can I find 'perl' and how to useit?
    >
    thanks.

Maybe you are looking for

  • How do I install iWork from my old MacBook on my new iMac?

    I bought a multi license iWork cd back in 2009 and I want to install it on my new iMac. Is there any way to install it without using the remote disk option? Thanks!

  • Is it fair that apple make your device out of date

    It really is not right that apple can make your device outdated when there is nothing wrong with it. I have 2 ipads ones, 1 ipad two,  1 iphone four, 1 iphone two, and 1 ipod touch two. The Ipod touch and the iphone 2 work fine but are becoming more

  • When exporting a video slideshow to my desktop it will start and then just end with no progress so I have to cancel it.

    When exporting a video slideshow to my desktop it will start and then just end with no progress so I have to close it out.  I get no warnings or any explanations. Any ideas?  I am running Windows 7.  No problem viewing it in LR.  Thanks

  • Explain plan is different for same query

    Hi all, I have a query, which basically selects some columns from a remote database view. The query is as follows: select * from tab1@remotedb, tab2@remotedb where tab1.cash_id = tab2.id and tab1.date = '01-JAN-2003' and tab2.country_code = 'GB'; Now

  • CE 7.2  startup issue

    Hi there, I am trying to start CE 7.2  and it fails with Jstart showing the following message in dev_jstart Mon May  9 03:32:10 2011 F  ******************************************************************************** F  Java environment properties (/