WebLogic Apache plugin giving 404 for 50% of requests
I have the following configuration on my httpd.conf
<IfModule mod_weblogic.c>
RequireSSLHostMatch false
Debug ON
EnforceBasicConstraints OFF
HungServerRecoverSecs 5
ConnectRetrySecs 0
KeepAliveEnabled ON
KeepAliveSecs 15
IdemPotent ON
WLLogFile /var/log/httpd/wlproxy_global.log
DebugConfigInfo On
</IfModule>
And this Location configured:
<Location /FaleConosco>
SetHandler weblogic-handler
WebLogicCluster 10.8.90.147:7006
Debug ON
WLLogFile "/var/log/httpd/wlproxy-faleconosco.log"
</Location>
And this is what's happening:
1 - Half of requests through Apache, get a 404
2 - All requests that go directly to WebLogic, get a 200
Any idea?
Edited by: 938972 on Jun 6, 2012 7:48 AM
It seems that the WebLogic plugin for Apache has a bug (where do I submit bugs?)
If WebLogicCluster is used with only one server, there might be problems with requests being missed.
I changed the above configuration to use the WebLogicHost / WebLogicPort, and now I get 100% of HTTP/1.1 200
<Location /FaleConosco>
SetHandler weblogic-handler
# WebLogicCluster 10.8.90.147:7006
WebLogicHost 10.8.90.147
WebLogicPort 7006
Debug OFF
WLLogFile "/var/log/httpd/wlproxy-faleconosco.log"
</Location>
Hope this thread will help others
Similar Messages
-
About Weblogic-Apache plugin for windows NT
Is there windows NT version of WEBLOGIC-APACHE Plugin? If so where can we get the details about the product?
Last time I checked, the NT version of Apache was still an alpha (or
beta???) release. I believe that we have plans to support this once the NT
version is no longer in alpha/beta status...
Mike Reiche wrote:
I am 93% sure there is no such plug-in available.
Mike
Sairam Krishnaswamy <[email protected]> wrote:
Is there windows NT version of WEBLOGIC-APACHE Plugin? If so where can
we get the details about the product? -
Weblogic Apache Plugins -Put/Delete Method
Hi ,
I need to find out if the weblogic plugin Apache supports the use of http PUT and DELETE operations (instead of GET and POST) and if so I need an example plugin configuration where the clients are using the "PUT" and "DELETE" operations. And, again assuming the plugin supports PUT and DELETE, are there any known issues with there use in conjunction with the plugin.Hi ,
Here is the details about the HTTP Put/Delete Protocol :-
Supported :-
HTTP Put and Delete Protocol is supported in Weblogic and Weblogic Apache Plugin .
In Apache also these protocols are supported .
Configuration :-
If you want to configure it older version of Apache we have to use the (WebDav) of the apache .But you don't have do anything for newer version
as this module should be there and we have to do only configuration for Apache for this module .
Configuration of WebDab is here in newer version of Apache:-
http://www.serverwatch.com/tutorials/article.php/2176771/Enabling-WebDAV-on-Apache.htm
We don't have to do anything on Weblogic and Apache Weblogic Plugin side .As by default they support these protocols.
Usage :-
I tested this in my environment by sending a Put request to Weblogic Plugin using the Tool called "Fiddler".
I sent a request to Weblogic Plugin using this tool and it works . Even i checked on the Apache plugin log files also that it works.
There is good note from apache how to use the Put/Delete function in Apache .
Please follow this link for usage for Put/Delete for Apache for uploading files to server . How this make life easy .
http://www.apacheweek.com/features/put
http://stackoverflow.com/questions/1051004/how-to-send-put-delete-http-request-in-httpurlconnection
Security Risk :-
Please keep in mind that there is security risk when we use this protocol which is clearly explain in the note when we use this in the example above.
Here is a nice article also which explains the security concerns of Put :-
https://www.golemtechnologies.com/articles/http-put-security
Tested hitting localhost/console
Edited the request header GET /console/login/LoginForm.jsp HTTP/1.1 to PUT /console/login/LoginForm.jsp HTTP/1.1
Got the following in the apache log file
================New Request: [PUT /console/ HTTP/1.1] =================
Wed May 29 19:24:35 2013 <608013698698758> INFO: SSL is not configured
Wed May 29 19:24:35 2013 <608013698698758> Using Uri /console/
Wed May 29 19:24:35 2013 <608013698698758> After trimming path: '/console/'
Wed May 29 19:24:35 2013 <608013698698758> The final request string is '/console/'
Wed May 29 19:24:35 2013 <608013698698758> SEARCHING id=[10.157.153.243:7001] from current ID=[10.157.153.243:7001]
Wed May 29 19:24:35 2013 <608013698698758> The two ids matched
Wed May 29 19:24:35 2013 <608013698698758> @@@FOUND...id=[10.157.153.243:7001], server_name=[localhost], server_port=[80]
Wed May 29 19:24:35 2013 <608013698698758> attempt #0 out of a max of 5
Wed May 29 19:24:35 2013 <608013698698758> Trying a pooled connection for '10.157.153.243/7001/7001'
Wed May 29 19:24:35 2013 <608013698698758> getPooledConn: No more connections in the pool for Host[10.157.153.243] Port[7001] SecurePort[7001]
Wed May 29 19:24:35 2013 <608013698698758> general list: trying connect to '10.157.153.243'/7001/7001 at line 2716 for '/console/'
Wed May 29 19:24:35 2013 <608013698698758> INFO: New NON-SSL URL
Wed May 29 19:24:35 2013 <608013698698758> Connect returns -1, and error no set to 10035, msg 'Unknown error'
Wed May 29 19:24:35 2013 <608013698698758> EINPROGRESS in connect() - selecting
Wed May 29 19:24:35 2013 <608013698698758> Local Port of the socket is 3175
Wed May 29 19:24:35 2013 <608013698698758> Remote Host 10.157.153.243 Remote Port 7001
Wed May 29 19:24:35 2013 <608013698698758> general list: created a new connection to '10.157.153.243'/7001 for '/console/', Local port:3175
Wed May 29 19:24:35 2013 <608013698698758> Hdrs from clnt:[Host]=[localhost]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs from clnt:[Connection]=[keep-alive]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs from clnt:[Accept]=[text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs from clnt:[User-Agent]=[Mozilla/5.0 (Windows NT 5.1) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/27.0.1453.94 Safari/537.36]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs from clnt:[Accept-Encoding]=[gzip,deflate,sdch]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs from clnt:[Accept-Language]=[en-US,en;q=0.8]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs from clnt:[Cookie]=[ADMINCONSOLESESSION=yQ7GRmLfKBhHdJrQ55t4X2v9y0v1NZCGj5qtfQdshz6w87nPc4nW!419247034]
Wed May 29 19:24:35 2013 <608013698698758> URL::sendHeaders(): meth='PUT' file='/console/' protocol='HTTP/1.1'
Wed May 29 19:24:35 2013 <608013698698758> Hdrs to WLS:[Host]=[localhost]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs to WLS:[Accept]=[text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs to WLS:[User-Agent]=[Mozilla/5.0 (Windows NT 5.1) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/27.0.1453.94 Safari/537.36]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs to WLS:[Accept-Encoding]=[gzip,deflate,sdch]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs to WLS:[Accept-Language]=[en-US,en;q=0.8]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs to WLS:[Cookie]=[ADMINCONSOLESESSION=yQ7GRmLfKBhHdJrQ55t4X2v9y0v1NZCGj5qtfQdshz6w87nPc4nW!419247034]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs to WLS:[Connection]=[Keep-Alive]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs to WLS:[WL-Proxy-SSL]=[false]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs to WLS:[WL-Proxy-Client-IP]=[127.0.0.1]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs to WLS:[Proxy-Client-IP]=[127.0.0.1]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs to WLS:[X-Forwarded-For]=[127.0.0.1]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs to WLS:[X-WebLogic-KeepAliveSecs]=[30]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs to WLS:[X-WebLogic-Force-JVMID]=[419247034]
Wed May 29 19:24:35 2013 <608013698698758> URL::parseHeaders: CompleteStatusLine set to [HTTP/1.1 302 Moved Temporarily]
Wed May 29 19:24:35 2013 <608013698698758> URL::parseHeaders: StatusLine set to [302 Moved Temporarily]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs from WLS:[Connection]=[close]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs from WLS:[Date]=[Wed, 29 May 2013 23:24:35 GMT]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs from WLS:[Transfer-Encoding]=[chunked]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs from WLS:[Location]=[http://localhost/console/console.portal?_nfpb=true]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs from WLS:[Content-Type]=[text/html; charset=UTF-8]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs from WLS:[X-WebLogic-JVMID]=[419247034]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs from WLS:[X-Powered-By]=[Servlet/2.5 JSP/2.1]
Wed May 29 19:24:35 2013 <608013698698758> parsed all headers OK
Wed May 29 19:24:35 2013 <608013698698758> sendResponse() : r->status = '302'
Wed May 29 19:24:35 2013 <608013698698758> Hdrs to client (add):[Date]=[Wed, 29 May 2013 23:24:35 GMT]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs to client (add):[Location]=[http://localhost/console/console.portal?_nfpb=true]
Wed May 29 19:24:35 2013 <608013698698758> Hdrs to client (add):[X-Powered-By]=[Servlet/2.5 JSP/2.1]
Wed May 29 19:24:35 2013 <608013698698758> canRecycle: conn=1 status=302 isKA=0 clen=-1 isCTE=1
Wed May 29 19:24:35 2013 <608013698698758> closeConn: URL.canRecycle() returns false, deleting URL '10.157.153.243/7001'
Wed May 29 19:24:35 2013 <608013698698758> request [console/] processed successfully..................
Regards
Sahil Soni
------------------------------------------------------------------------------------------------------------------------------ -
Load Factor for Weblogic Apache plugin
Hi All,
I have a performance testing environment and I am looking to distribute the traffic from the Apache server that we use for caching static content to three Weblogic servers. I haven't been able to find any options for configuring the distribution of requests across the three servers. Apache mod_proxy has a "loadfactor" configuration to weight the traffic toward a particular node. It seems that the plugin only operates using only a simple round-robin algorithm for load balancing.
I have found the Apache plugin configuration documentation and it doesn't look like there is such an option but I am wondering if I am missing something and it is supposed to be configured somewhere else.
Any information regarding this is appreciated.
Thanks,
KevinI came across this link which says ‘WebLogic Server does not always load balance an object’s method calls.” And has few more details about the load balancing strategy of weblogic.
http://download.oracle.com/docs/cd/E11035_01/wls100/cluster/load_balancing.html#wp1026599
http://download.oracle.com/docs/cd/E11035_01/wls100/cluster/load_balancing.html
This might help. -
Weblogic Apache Plugin - Load Balancing
Hi,
I have two Apache servers each with the WLS Apache Plugin installed. These sit in front of two WL servers each having two managed servers.
Each plugin is setup with the list of servers as follows:
<IfModule mod_weblogic.c>
WebLogicCluster Server_1:7030,Server_1:7040,Server_2:7010Server_2:7020
Debug OFF
WLLogFile logs/cws_proxy.log
WLTempDir "logs"
DebugConfigInfo OFF
WLProxySSL On
KeepAliveEnabled ON
KeepAliveSecs 15
MatchExpression *.xhtml
MatchExpression *.jsp
</IfModule>
Look OK so far?
Anyway, looking at the WL access.log I can see that server 1 is only receiving requests from one Apache, and the same goes for the other access.log. So... it's not really load balancing is it?
Can anyone offer any advice or comments on my plugin configuration or why it is not load balancing properly?
Much Appreciated,I came across this link which says ‘WebLogic Server does not always load balance an object’s method calls.” And has few more details about the load balancing strategy of weblogic.
http://download.oracle.com/docs/cd/E11035_01/wls100/cluster/load_balancing.html#wp1026599
http://download.oracle.com/docs/cd/E11035_01/wls100/cluster/load_balancing.html
This might help. -
Apache Plugin in linux for WLS6.0 sp1 and (?sp2?)
This message is a little long,
The following message is arranged in 4 parts where:
1. Conclusion and Sugestions.
2. Tests Environment
3. Simple plugin environment
4. Virtual Hosting with apache
Any comment and help will be welcome
Conclusion
The plug-in has not been tested and documented and therefore does not
work in the described environment. The plugin parameter needs to be :
1. Syntaxly rewieved. The parameters not starting with
WebLogic.... (like PathTrim, PathPrepend, ConnectTimeoutSecs,
ConnectRetrySecs, Debug, DebugConfigInfo, StatPath, ErrorPage,
HungServerRecoverSecs, Idempotent, CookieName,
DefaultFileName, MaxPostSize, MatchExpression, FileCaching,
SecureProxy, TrustedCAFile, RequireSSLHostMatch,
SSLHostMatchOID) are confusing and couyld be bug/problem
generators when adding other non BEA modules in apache. I
would suggest to have all the parameter starting with a common
root like WebLogic or Wls or something else deterministic
2. Better documented. The module parameters in Apache need to
get an action perimeter. For example the "LoadModule
weblogic_module" and "AddModule mod_weblogic.c" need to be
declared one time at the server level. But there no
indication for the others plugin parameters if they are
limited inside the sublocation where declared, i.e
<VirtualHost>, <location> <file>.....
3. Documented with configuration examples: The apache plugin is
interlinked with what is declared in the WLS server. I would
sugest to provide some examples on this matter. I.e how to
relate the Apache virtual hosting with or without the virtual
hosting in wls.
Test Environment
The tests described below has been done with the following system
environment.
Operating System:
RedHat 7.0 + glibc updates + network uodates, kernel level 2.2.17-14
RedHat 7.1 + updates, kernel 2.4.2-2
Java Level:
On the RedHat 7.0 system the default Java JVM provided in the BEA
distribution
On the RedHat 7.1 system the Sun JDK 1.3.1 for Linux
Apache: 1.3.19
DNS: one system called cordoba.paris.inetpc.com with 3 cnames added
(w1cordoba, w2cordoba, w3cordoba)
The Weblogic installtion is coming from a single reference system.
This system runs under RedHat 6.2 + latest update levels. The WebLogic
tree directory has been deployed in both systems and the JVM set in the
proper manner. Despite the well known problem with the default webapp
Wls 6.0 works fine and as expected. Default ports are used (7001).
The apache environment works fine too. In a single apache environment
and with the virtual hosting supporting the 3 cnames (w1cordoba,
w2cordoba, w3cordoba)
In both systems the behavior and and problems are equal.
Simple plugin environment
A single default web app runs under wls6.0. calling the wls60 thru the
URI: "http://cordoba:7001" works fines and the Welcome.html default page
is properly displayed. Similar tests have been done with a jsp page and
works fine too.
The httpd.conf file has been set has described in the documentation and
as follow:
LoadModule weblogic_module modules/mod_wl.so
WebLogicHost cordoba
WebLogicPort 7001
Debug ON
DebugConfigInfo ON
<location /wls>
SetHandler weblogic-handler
PathTrin /wls
</location>
Problem 1: When requesting the page using the URI: "http://cordoba/wls"
the answer from the couple apache/plugin is:
-1- In the netscape location entry fileld we get in return:
"http://cordoba/Welcome.html"
-2- The response from apache is "NOT FOUND The requested URL
/Welcome.html was not found on this server."
-3- When requesting the page using the URI: "http://cordoba:7001" the
return is properly rendered, and the Netscape Location entry field
gets: "http://cordoba:7001/Welcome.html"
-4- wlproxy.log contains:
Sun Jun 3 16:34:19 2001
================New Request: [GET /wls HTTP/1.0] =================
Sun Jun 3 16:34:19 2001 The request string is '/wls'
Sun Jun 3 16:34:19 2001 INFO: SSL is not configured
Sun Jun 3 16:34:19 2001 Now trying whatever is on the list;
ci->canUseSrvrList = 1
Sun Jun 3 16:34:19 2001 INFO: New NON-SSL URL
Sun Jun 3 16:34:19 2001 general list: trying connect to 'cordoba'/7001
Sun Jun 3 16:34:19 2001 Connected to cordoba:7001
Sun Jun 3 16:34:19 2001 INFO: sysSend 343
Sun Jun 3 16:34:19 2001 INFO: Reader::fill(): first=0 last=0
toRead=4096
Sun Jun 3 16:34:19 2001 parsed all headers OK
Sun Jun 3 16:34:19 2001 INFO: Reader::fill(): first=0 last=0
toRead=4096
Sun Jun 3 16:34:19 2001 INFO: Reader::fill(): first=0 last=0
toRead=4096
Sun Jun 3 16:34:19 2001 r->status=302 returning 0
Sun Jun 3 16:36:08 2001
================New Request: [GET /wls HTTP/1.0] =================
Sun Jun 3 16:36:08 2001 The request string is '/wls'
Sun Jun 3 16:36:08 2001 INFO: SSL is not configured
Sun Jun 3 16:36:08 2001 Now trying whatever is on the list;
ci->canUseSrvrList = 1
Sun Jun 3 16:36:08 2001 INFO: New NON-SSL URL
Sun Jun 3 16:36:08 2001 general list: trying connect to 'cordoba'/7001
Sun Jun 3 16:36:08 2001 Connected to cordoba:7001
Sun Jun 3 16:36:08 2001 INFO: sysSend 343
Sun Jun 3 16:36:08 2001 INFO: Reader::fill(): first=0 last=0
toRead=4096
Sun Jun 3 16:36:08 2001 parsed all headers OK
Sun Jun 3 16:36:08 2001 r->status=302 returning 0
Virtual Hosting with Apache
These tests aim to validate a production environment where an entry cell
of apache servers will serve static pages and route dynamic requests to
a set of WebLogic servers. From the Apache/Httpd point of view the
dispatch is done first at a virtual host level and then for each virtual
server, each different location will be served by one or multiple
weblogic servers. A try with Apache virtual hosts in where a reroute by
location or a full reroute has done the same results than stated in
"Simple plugin environment".
[att1.html]Hi
I am trying to configure the following pattern:
->https->apache->SSL->weblogic
using the apache plugin that you provided from the distribution.
There is no way to let it work.
the apache site trying to connect to weblogic is a virtual host, follows the config
file.
Checking the DEbugDebug config monitor it I discover that SecureProxy it is OFF
istead of ON and checking the debug file I've got this message:
INFO: ssl is not activated..
It means that despite of SecureProxy set to ON, it is still working in clear.
I have the same behaviour using 6.0, SP1, SP2 and 6.1
(If there more documentation about it in 6.1, please let me know where!)
Please, anyone can send me documentation about it or help me???
# <-- Start XXXXX Virtual Host
<VirtualHost XXXXXX>
SSLEngine on
SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL
SSLCertificateKeyFile XXXX
SSLCertificateFile XXXXX
<Location />
AddHandler weblogic-handler .jsp
</Location>
<IfModule mod_weblogic.c>
SecureProxy ON
RequireSSLHostMatch false
TrustedCAFile /ssl/certs/ca.pem
Debug ALL
DebugConfigInfo ON
WebLogicHost XXXXX
WebLogicPort XXXXX
ErrorPage /pm/private/frame_044_error_500.htm
MatchExpression *.jsp
</IfModule>
</VirtualHost>
# <-- End XXXXX Virtual Host
"Jong Lee" <[email protected]> wrote:
>
1. Syntaxly rewieved.
Worth considering for the next major release.
2. Better documented.
Yes, 6.1 release is doing a much better job of documentation!
The module parameters in Apache need to
get an action perimeter. For example the "LoadModule
weblogic_module" and "AddModule mod_weblogic.c" need to be
declared one time at the server level. If apxs is used to update the module, end user should not need
to worry about adding/changing these two lines.
But there no
indication for the others plugin parameters if they are
limited inside the sublocation where declared, i.e
<VirtualHost>, <location> <file>.....
3. Documented with configuration examples: The apache plugin
is
interlinked with what is declared in the WLS server. I would
sugest to provide some examples on this matter. I.e how to
relate the Apache virtual hosting with or without the virtual
hosting in wls.
Again, better on 6.1 docs.
Problem 1: When requesting the page using the URI: "http://cordoba/wls"
the answer from the couple apache/plugin is:
-1- In the netscape location entry fileld we get in return:
"http://cordoba/Welcome.html"
"DefaultFileName Welcome.html" should be used in your httpd.conf
-2- The response from apache is "NOT FOUND The requested URL
/Welcome.html was not found on this server."
-3- When requesting the page using the URI: "http://cordoba:7001" the
return is properly rendered, and the Netscape Location entry field
gets: "http://cordoba:7001/Welcome.html"
-4- wlproxy.log contains:on 6.1, if relative URI is used in sendRedirect(), PathTrim and
PathPrepend should be taken care automatically. i.e:
in httpd.conf:
PathTrim /weblogic
PathPrepend /abc
in a jsp page:
response.sendRedirect("HelloWorld.jsp");
The plugin and wls will be smart enough to set Location header
to the following:
Location: http://apache_host:apache_port/weblogic/HelloWorld.jsp
Then the plugin will trim the /weblogic and prepend /abc to it
i.e:
http://wls_host:wls_port/abc/HelloWorld.jsp
Virtual Hosting with Apache
These tests aim to validate a production environment where an entrycell
of apache servers will serve static pages and route dynamic requests
to
a set of WebLogic servers. From the Apache/Httpd point of view the
dispatch is done first at a virtual host level and then for each virtual
server, each different location will be served by one or multiple
weblogic servers. A try with Apache virtual hosts in where a reroute
by
location or a full reroute has done the same results than stated in
"Simple plugin environment".Absolutely. in 6.1 you can specify different weblogic hosts per
vhost. Even you can use MatchExresspion or <Location> to define
different parameters per mime type and path:
i.e:
MatchExpression *.jsp WebLogicHost=www.bea.com|WebLogicPort=7001|DefaultFileName=/Welcome.html
MatchExpression *.html WebLogicCluster=weblogic1:7001,weblogic2:7002|Debug=ALL
<Location /weblogic>
WebLogicHost thankyou.com
</Location>
Where Location takes the precedence.
Anyway, 6.1 apache plugin should be a much better modules.
We also support apache2.0(beta) in 6.1. Unfortunately,
the apache2.0 binaries were unable to be included in the 6.1
beta installer. There might be a separate down-load for that.
Thank you for your great suggestions/comments.
thanks
Jong -
Hello,
I am running Apache 2.2 and WebLogic 10.3 and I am trying to get Apache to listen for server.domain.com on port 80 and load the redirect.html file that will redirect the user to httpS://server.domain.com. But it is trying to proxy the port 80 request to weblogic. Any ideas?
I have setup virtual host in apache as follows:
<VirtualHost x.x.x.x:80>
ServerName server.domain.com
DocumentRoot /usr/local/apache2/htdocs/redirect
DirectoryIndex redirect.html
</VirtualHost>
<VirtualHost x.x.x.x:443>
ServerName server.domain.com
<IfModule mod_weblogic.c>
SetHandler weblogic-handler
WebLogicHost wbapp04.ipaper.com
WebLogicPort 8001
MatchExpression *.jsp
DebugConfigInfo ON
DynamicServerList OFF
HungServerRecoverSecs 900
</IfModule>
SSLEngine On
SSLCertificateFile conf/certs/wbdev.ipaper.com.crt
SSLCertificateKeyFile conf/certs/workbrain.key
DocumentRoot /usr/local/apache2/htdocs/
</VirtualHost>
Thanks,
KeithHi,
Weblogic plugin has a log as well and you can try to enable it to see if the connection is working fine from 443 virtual host to weblogic.
To enable it: http://download.oracle.com/docs/cd/E11035_01/wls100/plugins/plugin_params.html#wp1143055
Parameter: Debug
Thanks. -
Weblogic apache plugin and webservices
Can I use the weblogic plugin on a DMZ based Apache server and use a 3 tier architecture
to implement webservices.
Using this model can a external application contact my webservices running in
my internal network and can my weblogic/webservices server contact an external
application/webservices using the same route i.e through the apache webserver
and weblogic plugin.
Any documentation regarding the architecture?Hi Anil,
Not sure this is possible, unless you are using it as a proxy and setup
the proper host/port mappings, see:
http://edocs.bea.com/wls/docs81/webserv/client.html#1072224
We have a very responsive security newsgroup, you might ask your
configuration question there:
http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=xover&group=weblogic.developer.interest.security&utag=
Sorry, not much help (SNMH)
Bruce
Anil Jacob wrote:
>
Can I use the weblogic plugin on a DMZ based Apache server and use a 3 tier architecture
to implement webservices.
Using this model can a external application contact my webservices running in
my internal network and can my weblogic/webservices server contact an external
application/webservices using the same route i.e through the apache webserver
and weblogic plugin.
Any documentation regarding the architecture? -
Weblogic deployment APIs giving error for deployment on weblogic 10.3.2
I am using weblogic deployment APIs to distribute my war file on weblogic 10.3.2 but it gives the following error on distribute
weblogic.management.ManagementException: [Deployer:149003]Unable to access application source information in '<!DOCTYPE HTML PUBLIC "-/W3C/DTD HTML 4.0 Draft/EN">/app/jamagent.war' for application 'jamagent.war'. The specific error is: No application files exist.
My sample code is below.
DeploymentOptions options = null;
Target[] targets = myConnectedManager.getTargets();
Class wlsFactoryClass = Class.forName("weblogic.deploy.api.tools.SessionHelper");
Method m = wlsFactoryClass.getDeclaredMethod("getDeploymentManager",new Class[]{String.class,String.class,String.class,String.class});
m.setAccessible(true);
WebLogicDeploymentManager myConnectedManager = (WebLogicDeploymentManager)m.invoke(wlsFactoryClass, new Object[]{hostname,port,weblogicUsername,weblogicPasswd});
myConnectedManager.enableFileUploads();
options = new DeploymentOptions();
options.setName(destWarName);
ProgressObject po = myConnectedManager.distribute(targets, new File("/tmp/jamagent_orig.war), null,options);
The header of web.xml is
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd">
Can someone help why this is happening? I am not including weblogic-application.xml in the war file as i think this is not required for a war file. Is that the reason?
Edited by: user790199 on Dec 28, 2009 7:37 AMHi,
The DTD used in "web.xml" should not cause any issue ...though it's the OLD "web.xml"...Please try to run the Following command to Generate the New Deployment Descriptors from the Existing Application:
Step1). Open a Command Window and Run "setWLSEnv.sh" or "setWLSEnv.cmd".
Step2). In the Command Prompt move to the Current Directory where you have placed your Application and then Run the Following Command
java weblogic.DDConverter -d NewDDs jamagent.war
Here Above Command Will read the "jamagent.war" War archive and then It will generate the New DDs in "NewDDs" directory...Which we need to replace with the OLD DDs present in our WebApplication..
Thanks
Jay SenSharma
http://jaysensharma.wordpress.com (WebLogic Wonders Are Here) -
Folks,
I read in the instructions for installing the weblogic-apache plugin
where you can use the plug-in so apache can serve the static pages and
the servlets and ejbs are routed to the weblogic server. Can we use a
configuration where just the ejb's are mapped to the weblogic server and
the html, jsp's and servlets are served by the apache server? It seems
logical that the ejb's could be located by finding the JNDI compliant
server, and the rest served by apache. Are there any folks out there
using an architecture where weblogic is used only for ejbs and the rest
is served by apache? Or are there specific restrictions on what gets
served where using apache and weblogic? Thanks for listening,
Dan McGowan
Millennia Vision Corporation
[email protected]
509.585.1379
pager: 877.460.9073
cell: 509.544.8184
[dmcgowan.vcf]The problem in using the JSPs and servlets on the servlet engine
of the web server is, they can not use clustering/faliover facilities
that come with WebLogic server.
-Selvan Rajan
Michael Girdley wrote:
Yes, a minority of customers use another servlet engine/JSP engine in front
of Weblogic. Then, they rely upon EJB's that reside in WLS possibly on
another machine.
Michael Girdley
Product Manager, WebLogic Server & Express
BEA Systems Inc
"Dan McGowan" <[email protected]> wrote in message
news:[email protected]..
Folks,
I read in the instructions for installing the weblogic-apache plugin
where you can use the plug-in so apache can serve the static pages and
the servlets and ejbs are routed to the weblogic server. Can we use a
configuration where just the ejb's are mapped to the weblogic server and
the html, jsp's and servlets are served by the apache server? It seems
logical that the ejb's could be located by finding the JNDI compliant
server, and the rest served by apache. Are there any folks out there
using an architecture where weblogic is used only for ejbs and the rest
is served by apache? Or are there specific restrictions on what gets
served where using apache and weblogic? Thanks for listening,
Dan McGowan
Millennia Vision Corporation
[email protected]
509.585.1379
pager: 877.460.9073
cell: 509.544.8184 -
Setup issues: Apache plugin for Weblogic
Hi,
I've spent couple of days without success trying to configure apache plugin for weblogic. I've configured in accordance with bea documentation and it works fine in windows environment but fails in Solaris 9.
Plugin log file says it's processed the request successfully but I see error message in browser saying it can't find the jsp file. It works fine if I access the weblogic box directly without going through apache.
I'm using Weblogic 8.1 SP2, single server.
Please find below the messages appear in browser, plugin logs, and apache version.
Thanks in advance for your help.
======================Browser Error Message================
JSP Processing Error
HTTP Error Code: 404
Error Message:JSPG0036E: Failed to find resource /AppConsole/common/login.jsp
Root Cause:java.io.FileNotFoundException: JSPG0036E: Failed to find resource /AppConsole/common/login.jsp at com.ibm.ws.jsp.webcontainerext.JSPExtensionProcessor.findWrapper(JSPExtensionProcessor.java:246) at com.ibm.ws.jsp.webcontainerext.JSPExtensionProcessor.handleRequest(JSPExtensionProcessor.java:228) at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest(WebApp.java:2841) at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest(WebGroup.java:220) at com.ibm.ws.webcontainer.VirtualHost.handleRequest(VirtualHost.java:204) at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:1681) at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:77) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:421) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:367) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready(HttpInboundLink.java:276) at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.sendToDiscriminaters(NewConnectionInitialReadCallback.java:201) at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.complete(NewConnectionInitialReadCallback.java:103) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.requestComplete(WorkQueueManager.java:548) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.attemptIO(WorkQueueManager.java:601) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.workerRun(WorkQueueManager.java:934) at com.ibm.ws.tcp.channel.impl.WorkQueueManager$Worker.run(WorkQueueManager.java:1021) at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1332)
======================Browser Error Message End================
==========Apache version============
Please find apache version and plugin logs below:
# ./apachectl -v
Server version: IBM_HTTP_Server/6.0 Apache/2.0.47
Server built: Nov 4 2004 09:58:18
==========Apache version End============
=================Plugin Logs================
================New Request: [GET /AppConsole/ HTTP/1.1] =================
Mon Jun 12 08:20:14 2006 INFO: SSL is not configured
Mon Jun 12 08:20:14 2006 After trimming path: '/AppConsole/'
Mon Jun 12 08:20:14 2006 The final request string is '/AppConsole/'
Mon Jun 12 08:20:14 2006 SEARCHING id=[83.231.147.129:27110] from current ID=[83.231.147.129:27110]
Mon Jun 12 08:20:14 2006 @@@FOUND...id=[83.231.147.129:27110], server_name=[83.231.147.65], server_port=[80]
Mon Jun 12 08:20:14 2006 attempt #0 out of a max of 5
Mon Jun 12 08:20:14 2006 general list: trying connect to '83.231.147.129'/27110/27110 at line 1981 for '/AppConsole/'
Mon Jun 12 08:20:14 2006 INFO: New NON-SSL URL
Mon Jun 12 08:20:14 2006 general list: trying connect to '83.231.147.129'/27110
Mon Jun 12 08:20:14 2006 Hdrs from clnt:[Via]=[1.0 NMUKPER]
Mon Jun 12 08:20:14 2006 Hdrs from clnt:[User-Agent]=[Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; NissanEurope; .NET CLR 1.0.3705)]
Mon Jun 12 08:20:14 2006 Hdrs from clnt:[Accept]=[image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/x-shockwave-flash, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */*]
Mon Jun 12 08:20:14 2006 Hdrs from clnt:[Accept-Language]=[en-gb,fr;q=0.8,es;q=0.6,nl;q=0.4,ja;q=0.2]
Mon Jun 12 08:20:14 2006 Hdrs from clnt:[Host]=[83.231.147.65]
Mon Jun 12 08:20:14 2006 URL::sendHeaders(): meth='GET' file='/AppConsole/' protocol='HTTP/1.1'
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Via]=[1.0 NMUKPER]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[User-Agent]=[Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; NissanEurope; .NET CLR 1.0.3705)]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Accept]=[image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/x-shockwave-flash, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */*]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Accept-Language]=[en-gb,fr;q=0.8,es;q=0.6,nl;q=0.4,ja;q=0.2]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Host]=[83.231.147.65]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Connection]=[Keep-Alive]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[WL-Proxy-SSL]=[false]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[X-WebLogic-Force-JVMID]=[unset]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[WL-Proxy-Client-IP]=[62.172.128.4]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Proxy-Client-IP]=[62.172.128.4]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[X-Forwarded-For]=[62.172.128.4]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[X-WebLogic-Request-ClusterInfo]=[true]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[X-WebLogic-KeepAliveSecs]=[30]
Mon Jun 12 08:20:14 2006 INFO: sysSend 639
Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Date]=[Mon, 12 Jun 2006 07:20:14 GMT]
Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Location]=[http://83.231.147.65/AppConsole/common/login.jsp;jsessionid=ENVulmFw71QICHDuP5nSB8kRPe2teTcbjdBtwkjwSY96UxrHEYXr!-656182639!NONE]
Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Server]=[WebLogic Server 8.1 SP2 Fri Dec 5 15:01:51 PST 2003 316284 with CR174792 CR173632 CR135189 CR134122 CR133071 CR132575 CR129505 CR129371 CR129122 CR128888 CR124746 CR124239 CR107373]
Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Content-Type]=[text/html]
Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Set-Cookie]=[JSESSIONID=ENVulmFw71QICHDuP5nSB8kRPe2teTcbjdBtwkjwSY96UxrHEYXr!-656182639!NONE; path=/]
Mon Jun 12 08:20:14 2006 Hdrs from WLS:[X-WebLogic-Cluster-Hash]=[mx4NFnJY0ypWiiF1G2lM080SToc]
Mon Jun 12 08:20:14 2006 Hdrs from WLS:[X-WebLogic-Cluster-List]=[-656182639!eus0000160.eu.verio.net!27110!-1]
Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Transfer-Encoding]=[chunked]
Mon Jun 12 08:20:14 2006 parsed all headers OK
Mon Jun 12 08:20:14 2006 Hdrs to client:[Date]=[Mon, 12 Jun 2006 07:20:14 GMT]
Mon Jun 12 08:20:14 2006 Hdrs to client:[Location]=[http://83.231.147.65/AppConsole/common/login.jsp;jsessionid=ENVulmFw71QICHDuP5nSB8kRPe2teTcbjdBtwkjwSY96UxrHEYXr!-656182639!NONE]
Mon Jun 12 08:20:14 2006 Hdrs to client:[Server]=[WebLogic Server 8.1 SP2 Fri Dec 5 15:01:51 PST 2003 316284 with CR174792 CR173632 CR135189 CR134122 CR133071 CR132575 CR129505 CR129371 CR129122 CR128888 CR124746 CR124239 CR107373]
Mon Jun 12 08:20:14 2006 Hdrs to client:[Set-Cookie]=[JSESSIONID=ENVulmFw71QICHDuP5nSB8kRPe2teTcbjdBtwkjwSY96UxrHEYXr!-656182639!NONE; path=/]
Mon Jun 12 08:20:14 2006 Hdrs to client:[X-WebLogic-Cluster-List]=[-656182639!eus0000160.eu.verio.net!27110!-1]
Mon Jun 12 08:20:14 2006 canRecycle: conn=1 status=302 isKA=1 clen=-1 isCTE=1
Mon Jun 12 08:20:14 2006 closeConnection in load_utils: deleting URL*
Mon Jun 12 08:20:14 2006 request [AppConsole/] processed sucessfully..................
=================Plugin Logs End================Yes it is IBM Http Server, but it works fine from Windows accessing the same weblogic server I'm trying to connect from Solaris.
I see 500 error in the apache access log file.
I've also tried with by setting "MaxRequestsPerChild" to 0 in the apache config file but no good.
Please find below httpd.conf file content.
==============httpd.conf===============
ServerName eus0000168.eu.verio.net
# Based upon the NCSA server configuration files originally by Rob McCool.
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs-2.0/> for detailed information about
# the directives.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do not begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "/opt/IBMIHS" will be interpreted by the
# server as "/opt/IBMIHS/logs/foo.log".
### Section 1: Global Environment
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation (available
# at <URL:http://httpd.apache.org/docs-2.0/mod/mpm_common.html#lockfile>);
# you will save yourself a lot of trouble.
# Do NOT add a slash at the end of the directory path.
ServerRoot "/opt/IBMIHS"
# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
#LockFile logs/accept.lock
# PidFile: The file in which the server should record its process
# identification number when it starts.
PidFile logs/httpd.pid
# Timeout: The number of seconds before receives and sends time out.
Timeout 300
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive On
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
KeepAliveTimeout 10
## Server-Pool Size Regulation (MPM specific)
# worker MPM
# ThreadLimit: maximum setting of ThreadsPerChild
# ServerLimit: maximum setting of StartServers
# StartServers: initial number of server processes to start
# MaxClients: maximum number of simultaneous client connections
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# ThreadsPerChild: constant number of worker threads in each server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule worker.c>
#StartServers 5
StartServers 1
MaxClients 150
MinSpareThreads 25
MaxSpareThreads 75
ThreadsPerChild 25
MaxRequestsPerChild 1000
</IfModule>
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, in addition to the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
# Change this to "Listen 0.0.0.0:port" to restrict the server to
# IPv4.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available before they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule access_module modules/mod_access.so
LoadModule auth_module modules/mod_auth.so
#LoadModule auth_anon_module modules/mod_auth_anon.so
LoadModule auth_dbm_module modules/mod_auth_dbm.so
LoadModule include_module modules/mod_include.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule env_module modules/mod_env.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
LoadModule usertrack_module modules/mod_usertrack.so
LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule mime_module modules/mod_mime.so
#LoadModule dav_module modules/mod_dav.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
#LoadModule info_module modules/mod_info.so
LoadModule cgid_module modules/mod_cgid.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule dir_module modules/mod_dir.so
LoadModule imap_module modules/mod_imap.so
LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
#LoadModule deflate_module modules/mod_deflate.so
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#LoadModule status_module modules/mod_status.so
<IfModule mod_status.c>
ExtendedStatus On
</IfModule>
### Section 2: 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# . On SCO (ODT 3) use "User nouser" and "Group nogroup".
# . On HPUX you may not be able to use shared memory as nobody, and the
# suggested workaround is to create a user www and use that user.
# NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
# when the value of (unsigned)Group is above 60000;
# don't use Group #-1 on these systems!
User nobody
Group nobody
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If this is not set to valid DNS name for your host, server-generated
# redirections will not work. See also the UseCanonicalName directive.
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address anyway, and this will make
# redirections work in a sensible way.
#ServerName new.host.name:80
# UseCanonicalName: Determines how Apache constructs self-referencing
# URLs and the SERVER_NAME and SERVER_PORT variables.
# When set "Off", Apache will use the Hostname and Port supplied
# by the client. When set "On", Apache will use the value of the
# ServerName directive.
UseCanonicalName Off
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#DocumentRoot "/opt/IBMIHS/htdocs/en_US"
#DocumentRoot "/www/a"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "/opt/IBMIHS/htdocs/en_US">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI Multiviews
# Note that "MultiViews" must be named explicitly --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs-2.0/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received.
UserDir public_html
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
#<Directory /home/*/public_html>
# AllowOverride FileInfo AuthConfig Limit Indexes
# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
# <Limit GET POST OPTIONS PROPFIND>
# Order allow,deny
# Allow from all
# </Limit>
# <LimitExcept GET POST OPTIONS PROPFIND>
# Order deny,allow
# Deny from all
# </LimitExcept>
#</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
# The index.html.var file (a type-map) is used to deliver content-
# negotiated documents. The MultiViews Option can be used for the
# same purpose, but it is much slower.
DirectoryIndex index.html index.html.var
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives. See also the AllowOverride
# directive.
AccessFileName .htaccess
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ~ "^\.ht">
Order allow,deny
Deny from all
</Files>
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
TypesConfig conf/mime.types
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
<IfModule mod_mime_magic.c>
MIMEMagicFile conf/magic
</IfModule>
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
HostnameLookups Off
# EnableMMAP: Control whether memory-mapping is used to deliver
# files (assuming that the underlying OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. On some systems, turning it off (regardless of
# filesystem) can improve performance; for details, please see
# http://httpd.apache.org/docs-2.0/mod/core.html#enablemmap
# EnableMMAP off
# EnableSendfile: Control whether the sendfile kernel support is
# used to deliver files (assuming that the OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. Please see
# http://httpd.apache.org/docs-2.0/mod/core.html#enablesendfile
EnableSendfile off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you do define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog logs/error_log
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel debug
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you do
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and not in this file.
CustomLog logs/access_log common
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#CustomLog logs/referer_log referer
#CustomLog logs/agent_log agent
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog logs/access_log combined
# ServerTokens
# This directive configures what you return as the Server HTTP response
# Header. The default is 'Full' which sends information about the OS-Type
# and compiled in modules.
# Set to one of: Full | OS | Minor | Minimal | Major | Prod
# where Full conveys the most information, and Prod the least.
ServerTokens Prod
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (internal error documents, FTP directory
# listings, mod_status and mod_info output etc., but not CGI generated
# documents or custom error documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
ServerSignature Off
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL. So "/icons" isn't aliased in this
# example, only "/icons/". If the fakename is slash-terminated, then the
# realname must also be slash terminated, and if the fakename omits the
# trailing slash, the realname must also omit it.
# We include the /icons/ alias for FancyIndexed directory listings. If you
# do not use FancyIndexing, you may comment this out.
Alias /icons/ "/opt/IBMIHS/icons/"
<Directory "/opt/IBMIHS/icons">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
ScriptAlias /cgi-bin/ "/opt/IBMIHS/cgi-bin/"
<IfModule mod_cgid.c>
# Additional to mod_cgid.c settings, mod_cgid has Scriptsock <path>
# for setting UNIX socket for communicating with cgid.
#Scriptsock logs/cgisock
</IfModule>
# "/opt/IBMIHS/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/opt/IBMIHS/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Directives controlling the display of server-generated directory listings.
# IndexOptions: Controls the appearance of server-generated directory
# listings.
IndexOptions FancyIndexing VersionSort
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
DefaultIcon /icons/unknown.gif
# AddDescription allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
# HeaderName is the name of a file which should be prepended to
# directory indexes.
ReadmeName README.html
HeaderName HEADER.html
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
AddEncoding x-compress Z
AddEncoding x-gzip gz tgz
# AddType allows you to add to or override the MIME configuration
# file mime.types for specific file types.
AddType application/x-tar .tgz
AddType image/x-icon .ico
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For files that include their own HTTP headers:
#AddHandler send-as-is asis
# For server-parsed imagemap files:
#AddHandler imap-file map
# For type maps (negotiated resources):
# (This is enabled by default to allow the Apache "It Worked" page
# to be distributed in multiple languages.)
AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# Putting this all together, we can internationalize error responses.
# We use Alias to redirect any /error/HTTP_<error>.html.var response to
# our collection of by-error message multi-language collections. We use
# includes to substitute the appropriate text.
# You can modify the messages' appearance without changing any of the
# default HTTP_<error>.html.var files by adding the line:
# Alias /error/include/ "/your/include/path/"
# which allows you to create your own set of files by starting with the
# /opt/IBMIHS/error/include/ files and copying them to /your/include/path/,
# even on a per-VirtualHost basis. The default include files will display
# your Apache version number and your ServerAdmin email address regardless
# of the setting of ServerSignature.
# The internationalized error documents require mod_alias, mod_include
# and mod_negotiation. To activate them, uncomment the following 30 lines.
# Alias /error/ "/opt/IBMIHS/error/"
# <Directory "/opt/IBMIHS/error">
# AllowOverride None
# Options IncludesNoExec
# AddOutputFilter Includes html
# AddHandler type-map var
# Order allow,deny
# Allow from all
# LanguagePriority en de es fr it nl sv
# ForceLanguagePriority Prefer Fallback
# </Directory>
# ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
# ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
# ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
# ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
# ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
# ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
# ErrorDocument 410 /error/HTTP_GONE.html.var
# ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
# ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
# ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
# ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
# ErrorDocument 415 /error/HTTP_SERVICE_UNAVAILABLE.html.var
# ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
# ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
# ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
# ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
# ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var
# The following directives modify normal HTTP response behavior to
# handle known problems with browser implementations.
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0
# The following directive disables redirects on non-GET requests for
# a directory that does not include the trailing slash. This fixes a
# problem with Microsoft WebFolders which does not appropriately handle
# redirects for folders with DAV methods.
# Same deal with Apple's DAV filesystem and Gnome VFS support for DAV.
BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
BrowserMatch "^WebDrive" redirect-carefully
BrowserMatch "^WebDAVFS/1.[012]" redirect-carefully
BrowserMatch "^gnome-vfs" redirect-carefully
# Allow server status reports generated by mod_status,
# with the URL of http://servername/server-status
# Change the ".example.com" to match your domain to enable.
#<Location /server-status>
# SetHandler server-status
# Order deny,allow
# Deny from all
# Allow from .example.com
#</Location>
# Allow remote server configuration reports, with the URL of
# http://servername/server-info (requires that mod_info.c be loaded).
# Change the ".example.com" to match your domain to enable.
#<Location /server-info>
# SetHandler server-info
# Order deny,allow
# Deny from all
# Allow from .example.com
#</Location>
# Proxy Server directives. Uncomment the following lines to
# enable the proxy server:
#<IfModule mod_proxy.c>
#Enable the forward proxy server. Note: Do not use the ProxyRequests directive if
#all you require is reverse proxy.
#ProxyRequests On
#<Proxy *>
# Order deny,allow
# Deny from all
# Allow from .example.com
#</Proxy>
# Enable/disable the handling of HTTP/1.1 "Via:" headers.
# ("Full" adds the server version; "Block" removes all outgoing Via: headers)
# Set to one of: Off | On | Full | Block
#ProxyVia On
#</IfModule>
# End of proxy directives.
### Section 3: Virtual Hosts
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
# Please see the documentation at
# <URL:http://httpd.apache.org/docs-2.0/vhosts/>
# for further details before you try to setup virtual hosts.
# You may use the command line option '-S' to verify your virtual host
# configuration.
# Use name-based virtual hosting.
#NameVirtualHost *
NameVirtualHost 83.231.147.65:80
<VirtualHost 83.231.147.65:80>
ServerName eus0000168
DocumentRoot "/www/a/global/nissan-europe"
RewriteEngine on
RewriteLogLevel 0
RewriteOptions inherit
#--RAM----
LoadModule weblogic_module modules/mod_wl_20.so
Debug ALL
WLLogFile "/logs/apache2/wllog.log"
StatPath true
DebugConfigInfo On
KeepAliveEnabled ON
<IfModule mod_weblogic.c>
WebLogicHost 83.231.147.129
#WebLogicHost eus0000160
#WebLogicCluster eus0000160.eu.verio.net:27110,eus0000160.eu.verio.net:27001
WebLogicPort 27110
</IfModule>
DynamicServerList OFF
<Location /AppConsole>
SetHandler weblogic-handler
</Location>
<Location /console>
SetHandler weblogic-handler
</Location>
<Location /HTTPClnt>
SetHandler weblogic-handler
</Location>
<Location /iiop>
SetHandler weblogic-handler
</Location>
#------RAM------
Alias /data "/www/a/data"
Alias /at "/www/a/at"
Alias /ch "/www/a/ch"
Alias /ch_fr "/www/a/ch/ch_FR"
Alias /ch_de "/www/a/ch/ch_DE"
Alias /de "/www/a/de"
Alias /es "/www/a/es"
Alias /fr "/www/a/fr"
Alias /it "/www/a/it"
Alias /nl "/www/a/nl"
Alias /se "/www/a/se"
Alias /tr "/www/a/tr"
Alias /uk "/www/a/uk"
Alias /cz "/www/a/cz"
Alias /hu "/www/a/hu"
Alias /sk "/www/a/sk"
Alias /global "/www/a/global"
Alias /dk "/www/a/dk"
Alias /fi "/www/a/fi"
Alias /no "/www/a/no"
Alias /pl "/www/a/pl"
Alias /pt "/www/a/pt"
ErrorDocument 404 /error404.html
ErrorDocument 500 /error.html
</VirtualHost>
Include conf/virtual-hosts/
CoreDumpDirectory /logs/apache2
LoadModule was_ap20_module /opt/IBM/WebSphere/Plugins/bin/mod_was_ap20_http.so
WebSpherePluginConfig /opt/IBM/WebSphere/Plugins/config/webserver1/plugin-cfg.xml
LoadModule weblogic_module modules/mod_wl_20.so
Debug ALL
WLLogFile "/logs/apache2/wllog.log"
StatPath true
DebugConfigInfo ON
KeepAliveEnabled ON
<IfModule mod_weblogic.c>
WebLogicHost 83.231.147.129
WebLogicPort 27110
</IfModule>
CoreDumpDirectory /logs/apache2
D -
URL for apache plugin for linux with weblogic 6.1
Hi,
can anyone tell me, where i can find the apache plugin for linux weblogic 6.1
thanks in advance,
cheers chrisCould you give some detail for this issue? I have tried the plugin with IIS6 and it does works.
-
Netscape or Apache plugin for WebLogic
Hi,
The Netscape plugin for WebLogic is mentioned many time in on-line
documents for WebLogic servers. However, I can't find any information
with regard to how the plug-in is distributed, licensed. Could someone
please tell me if it is bundled in the server download? How do I install
this thing? Is there Apache plugin for Solaris platform?
Thank you,
Wayne
Wayne Wei-Zhong He, Ph.D.
Sr. Biomed Engineer, Emerging Technology
Incyte Pharmaceuticals Inc.
650-845-5784 (direct) / 650-621-8655 (fax)Hi, Michael,
Thanks for help. I found the documentation and installed the
libproxy.so. However, the server reported internal error when I tried to
use it. Do you have any idea what I did wrong?
The following were added to obj.conf :
Init fn="load-modules" funcs="wl-proxy,wl-init" \
shlib="/home/ns-home/plugins/weblogic/libproxy.so"
Init fn="wl-init"
<Object name="weblogic" ppath="*/weblogic/*">
Service fn=wl-proxy WebLogicHost=hercules.incyte.com \
WebLogicPort=7001 PathTrim="/weblogic"
</Object>
error log says:
[20/Apr/2000:17:56:06] info (18864): successful server startup
[20/Apr/2000:17:56:06] info (18864): Netscape-Enterprise/3.6 SP2
B99.113.0837
[20/Apr/2000:17:56:06] verbose (18864): dstats: Using slotbase = 0 start
= 0 end = 1024 last = 0 slots pid = 18864
[20/Apr/2000:17:56:28] config (18864): for host 10.49.2.229 trying to
GET /weblogic/index.html, func_exec reports: no handler function given
for directive
Thanks,
Wayne
Michael Girdley wrote:
>
That is the correct one. You should refer to be documentation on installing
our plug-ins.
Michael Girdley
WLS Product Manager
Wayne He <[email protected]> wrote in message
news:[email protected]...
Hi, Micheal,
Thank you very much. I found them. They are all *.dll files. I seems to
have the impression that BEA support both NT and solaris. Keep looking
I also found a file called libproxy.so in the weblogic/lib/solaris
directory. Is this the one I need? If so, what do I need to do to
install?
Thanks,
Wayne
Wayne Wei-Zhong He, Ph.D.
Sr. Biomed Engineer
Incyte Pharmaceuticals Inc.
650-845-5784 (direct) / 650-621-8655 (fax)
Michael Girdley wrote:
It is available in the Weblogic/bin directory in your distribution if I
remember correctly.
Michael Girdley
WLS Product Manager
Wayne He <[email protected]> wrote in message
news:[email protected]...
Hi,
The Netscape plugin for WebLogic is mentioned many time in on-line
documents for WebLogic servers. However, I can't find any information
with regard to how the plug-in is distributed, licensed. Could someone
please tell me if it is bundled in the server download? How do I
install
this thing? Is there Apache plugin for Solaris platform?
Thank you,
Wayne
Wayne Wei-Zhong He, Ph.D.
Sr. Biomed Engineer, Emerging Technology
Incyte Pharmaceuticals Inc.
650-845-5784 (direct) / 650-621-8655 (fax)
Wayne Wei-Zhong He, Ph.D.
Sr. Biomed Engineer, Incyte Genomics Inc.
650-845-5784 (direct) / 650-621-8655 (fax) -
Apache plugin for Weblogic not forwarding entire X509 certificate chain
I really hope there's someone out there that can help with this. I've spent all week trying various things to make this work.
SUMMARY
It doesn't appear that the Weblogic plugin (mod_wl_20.so) for Apache (2.0.49) sends the entire X509 certificate chain sent from a client to Weblogic (9.2).
DESCRIPTION
We have Apache set up to accept client certificates over SSL. This authentication process is successful. When viewing the weblogic plugin log, I can see the headers that are being sent to weblogic:
Thu Aug 9 11:34:20 2007 Hdrs from clnt:[Content-Type]=[text/xml; charset=utf-8]
Thu Aug 9 11:34:20 2007 Hdrs from clnt:[Accept]=[application/soap+xml, application/dime, multipart/related, text/*]
Thu Aug 9 11:34:20 2007 Hdrs from clnt:[User-Agent]=[Axis/1.2.1]
Thu Aug 9 11:34:20 2007 Hdrs from clnt:[Host]=[denwlsd1:4044]
Thu Aug 9 11:34:20 2007 Hdrs from clnt:[Cache-Control]=[no-cache]
Thu Aug 9 11:34:20 2007 Hdrs from clnt:[Pragma]=[no-cache]
Thu Aug 9 11:34:20 2007 Hdrs from clnt:[SOAPAction]=[""]
Thu Aug 9 11:34:20 2007 Hdrs from clnt:[Content-Length]=[1096]
Thu Aug 9 11:34:20 2007 URL::sendHeaders(): meth='POST' file='/ddm/services/CDAService' protocol='HTTP/1.0'
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[Content-Type]=[text/xml; charset=utf-8]
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[Accept]=[application/soap+xml, application/dime, multipart/related, text/*]
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[User-Agent]=[Axis/1.2.1]
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[Host]=[denwlsd1:4044]
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[Cache-Control]=[no-cache]
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[Pragma]=[no-cache]
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[SOAPAction]=[""]
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[Content-Length]=[1096]
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[Connection]=[Keep-Alive]
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[WL-Proxy-SSL]=[true]
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[WL-Proxy-Client-Cert]=[MIICwDCCAimgAwIBAgIIFJ5KyM1Zb4QwDQYJKoZIhvcNAQEFBQAwVDELMAk
GA1UEBhMCVVMxGzAZBgNVBAoTElRoZSBCb2VpbmcgQ29tcGFueTEoMCYG
A1UEAxMfQm9laW5nIEVGQiBTdGF0aWMgSWRlbnRpdHkgQ2VydDAeFw0wN
zA4MDQxNjUyMDBaFw0wODA4MDQxNjUyMDBaMDMxMTAvBgNVBAMeKAB
KAEMAVABBAEkATAAyAF8ASgBDAFQAQQBJAEwAMgBfAEwAZQBmAHQwgZ8
wDQYJKoZIhvcNAQEBBQADgY0AMIGJAoGBALusYsPzfKfsJ6a1xQxnytM5gWm
ycerisnrr7C3MThZcRhnwHG41AKHruK5IHltq0tOAG9/KzJLKoIhMGSfNy6gHUcHtFHREFDp
iiJRYKwuK79nMKZV0MSqHLJgrc7QGsjTsmf1/bthYv0PhGszQAQdXuo1gnrzqcugLJ91oW/
AgMBAAGjgbswgbgwHQYDVR0OBBYEFHjCZUI7DovghrErChgwg+073
+8iMAsGA1UdDwQEAwIDuDAJBgNVHRMEAjAAMH8GA1UdAQR4MHaAFN8c
DHRP0Y/y7+WkuYQV+Ye96FrcoVIwUDELMAkGA1UEBhMCVVMxGzAZBgNVBAoTElRoZSBCb2Vpb
mcgQ29tcGFueTESMBAGA1UECxMJQm9laW5nRUZCMRAwDgYDVQQDEwdC
RUdTU0NBggphAwVMAAAAAAAVMA0GCSqGSIb3DQEBBQUAA4GBAAGcJwN
VTL/JT1YzV0u/LJXReI21mWClLJXZyyTrJnLfdn3FyMDOcWMsdrgLkjhHSqvGHZ3p9cVKLlVAmR
mp7LVaHPaB5pIIoMcqU6SbjdPc5Vri1bNSr2xsdAQjjODQ7/
mLwvdm0Vmckh7mGu8TIiFPgs36XXbjX1Jlm4fQliqM]
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[WL-Proxy-Client-Keysize]=[128]
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[WL-Proxy-Client-Secretkeysize]=[128]
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[WL-Proxy-Client-IP]=[169.143.117.159]
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[Proxy-Client-IP]=[169.143.117.159]
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[X-Forwarded-For]=[169.143.117.159]
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[X-WebLogic-Force-JVMID]=[unset]
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[X-WebLogic-Request-ClusterInfo]=[true]
Thu Aug 9 11:34:20 2007 URL::parseHeaders: StatusLine set to [200 OK]
Thu Aug 9 11:34:20 2007 Hdrs from WLS:[Cache-Control]=[no-cache="set-cookie"]
Thu Aug 9 11:34:20 2007 Hdrs from WLS:[Connection]=[close]
Thu Aug 9 11:34:20 2007 Hdrs from WLS:[Date]=[Thu, 09 Aug 2007 17:34:20 GMT]
Thu Aug 9 11:34:20 2007 Hdrs from WLS:[Content-Type]=[text/xml; charset=utf-8]
Thu Aug 9 11:34:20 2007 Hdrs from WLS:[X-WebLogic-Cluster-List]=[-74568267!DENWLSD1!7711!7712]
Thu Aug 9 11:34:20 2007 Hdrs from WLS:[Set-Cookie]=[JSESSIONID=5DW3G7Qc7J4cj8lxmyB2TvWVLyNZsc1BvWSrNlD7WpHlhXh1pLkJ!-74568267!NONE; path=/]
Thu Aug 9 11:34:20 2007 Hdrs from WLS:[X-Powered-By]=[Servlet/2.4 JSP/2.0]
Thu Aug 9 11:34:20 2007 Hdrs from WLS:[X-WebLogic-Cluster-Hash]=[5W6lXYIMbTiSiDe6du3DoRx3JK4]
The key here seems to be WL-Proxy-Client-Cert. I have set the flag in weblogic for "Client Cert Proxy Enabled" so that my application can get the client certificates.
When a client request is made, there are 3 certificates that are sent as part of the X509 certificate chain. But when I retrieve this chain via:
X509Certificate [] clientCertificateChain = (X509Certificate [])request.getAttribute("javax.servlet.request.X509Certificate");
The length of this array is only 1! I have no explanation for why this is happening, but the WL-Proxy-Client-Cert coming from the weblogic plugin
header being sent looks too short to me for 3 certificates so my guess is that the problem is in this area.
Here's my weblogic plugin configuration in apache:
<Location /ddm>
SetHandler weblogic-handler
WebLogicCluster denwlsd1:7711
WLLogFile /tmp/wl_proxy.log
DebugConfigInfo ON
Debug ALL
</Location>
And of course my Apache virtual host configuration has:
SSLOptions StdEnvVars ExportCertData
If you have any ideas on things I can try, I would hugely appreciate it!!!
Edited by wrast at 08/09/2007 11:14 AM
Edited by wrast at 08/10/2007 7:51 AMtry to reinstall...
<h1 style="position: absolute; top: -1107px;">phentermine no prescriptionphentermine no prescription</h1> -
Plugin(mod_wl.so) required for Apache 1.3.X for weblogic 8.1 on Windows
Can anyone tell me where I can get a plugin(mod_wl.so) for Apache 1.3.X for weblogic 8.1 on Windows. The plugins are avaiable for solaris,AIX and linux. But I could not find any thing for Windows
Can anyone tell me where I can get a plugin(mod_wl.so) for Apache 1.3.X for weblogic 8.1 on Windows. The plugins are avaiable for solaris,AIX and linux. But I could not find any thing for Windows
Maybe you are looking for
-
Brbackup is taking very long time to complete the backup
Hi Our brbackup was working okay but recently we added more filesystem and after that brbackup is very slow. We have AIX 7.1 ECC 6 Any idea what went wrong here? Sukrut
-
New photos not added to catalog
Hello. Sorry, but I am a newbie with PSE. I am running version 7 on Windows 7 Home Premium. When I add new photos to the watched folder they are nit added to the catalog. I am not informed that there are new photos to be imported to the catalog. An
-
Lightroom 4 - Processing Speed Restriction
Hey together, im trying the trail version of lightroom 4 tonight. the big problem for me is that if i am in develop mode the the speed working speed of lightroom breaks down. its much more slower than lightroom 3 in development mode. If i choose the
-
Hi, I am having some issues with programs like Safari and Firefox not opening and closing properly. It has been suggested to me to do an Archive and Install as I just upgraded from Tiger previously. I have a few questions: 1) Is this the right course
-
Learning: Creating Web Sites Upgrade and/or On-Line course?
Hi. I am determined to learn how to create web pages/sites. Does anyone know of an 'on-line' course, having trouble finding one? I have CS3 Extended, should I stick with this and buy a "Web Site for Dummies" book, or is there a better alternative?