Weblogic Application redeployment not working

Hi guys
I am running on WL10.0 (WLP10.2). I was trying to implement application-redeployment. I gave version name to app, and update it. But application just keeps on waiting (deploy Running status). Where as it should come to Active state and the older version should be retired state.
Is it working for anyone?
Thanks

I have seen this many times wls 9 and 10. I usually follow these steps to get it in active state.
1. Shutdown all the JVMs.
2. Start Admin server and undo any unactivated changes
3. delete the cache directory on all the jvms. (check also permission for all the files)
4. bring up the managed servers
5. update the application again.
It works for me most of the time. Hope this helps.
regards,
Harsha

Similar Messages

WebLogic 11g: Weblogic-Application-Version not taken into account

Hello,
I'm trying to set up Production Redeployment on my EAR, under WebLogic 10.3.6.
However, I can't figure out how to make Weblogic-Application-Version work in MANIFEST.MF
Here is my EAR structure:
MyApplication
--- APP-INF
--- --- lib
--- --- classes
--- META-INF
--- --- application.xml
--- --- weblogic-application.xml
--- --- MANIFEST.MF <- file I update
--- WebApp1
--- --- META-INF
--- --- --- MANIFEST.MF
--- --- WEB-INF
--- --- --- classes
--- --- --- lib
--- --- --- web.xml
--- --- --- weblogic.xml
--- WebApp2
--- --- same as WebApp1
MANIFEST.MF content is the following:
Manifest-Version: 1.0
Weblogic-Application-Version: VERSION_1
The problem is that it's not taken into account when I deploy the application in the WebLogic console.
When I use staged mode, the line Weblogic-Application-Version: VERSION_1 is removed from the staged MANIFEST.MF file.
The only way to manage to version my application is to add the flag -appversion to weblogic.Deployer, but I don't want to use that on a Production environment (and it's not recommended in the documentation!).
Any idea why Weblogic-Application-Version not taken into account? I tried to add debug mode to node weblogic/debug but with no success.
Thanks by advance,
Julien

I tested it at my end and was able to redeploy it successfully with the application versions.
Are you saying that by deploying through weblogic console,the archive version is not honoring/getting picked up .is that correct?
if yes, what does your weblogic console shows for archive version,when you first try to deploy your application with the VERSION_1.
I mean,when you are on the "Optional Settings" Page.Do you see the Archive Version as VERSION_1?
Deployments >> Click on the Install >> select your application ( MyAPP)>> Install this deployment as an application >> Select deployment targets >> Optional Settngs
Example from the Optional settings Page for My application
What do you want to name this deployment?
Name: MyAPP
Archive Version:
VERSION_1
This can confirm that the application being deployed is versioned one and if it doesn't shows up,then you need to check why its not getting picked up.?
Moreover,You can enable the "deploy" debug flag to see whats going wrong in your case during the deployment process
Server > Debug > Weblogic > Deploy
Do refer the below viewlet on the Production Redeployment
http://download.oracle.com/otn_hosted_doc/wls/redeployment/wls-side-by-side-non-annotation_viewlet_swf.html

Application does not work properly when I press a CommanButton

Hi all, I am having a problem with weblogic 10.3.5.
It turns out that an application built with JDeveloper 11.1.5, I test it, and everything goes well in the JDeveloper integrated Weblogic.
But when deploy in a standalone weblogic 10.3.5 server, the application does not work properly when I press a CommanButton to go to another page search (the property "action" is set correctly) , but nothing happens, stays in the same home page. Similarly when a commanButton link to run a task-flow, It do not work , however in the JDeveloper integrated Weblogic it runs correctly.
How I can solve these problems?
Thanks.

Thanks Frank for help us, but when I writing this comment we are doing at home. So, we going to test the page in a stand alone weblogic server 10.3.5. We wrote the URL as :
" http://<our ip>:7001/myApp/faces/index.jspx "
this application contains a report desing and compiled with iReport 4.5.1 ( last version in the moment ), we can see the report when I press a commanButton without any problem.
But now, we need try your suggestions in the office, and give you more information about it . Thanks for the moment.
In the Afternoon we gonna give you more information about it .

Application is not working when changing of oracle server domain name

Hi friends
We decided to change oracle server domain name due to some reason .. we changed the domain name but application running on the other server cannot connect to this domain i don't know whats the problem . I change the enterprise manager ( emca -config dbcontrol db -repos recreate_) according to the new domain but some of the future not working like date,etc. can anyone help me how to rectify it plz.

Mohd khalid wrote:
Hi friends
We decided to change oracle server domain name due to some reason .. we changed the domain name but application running on the other server cannot connect to this domain i don't know whats the problem . I change the enterprise manager ( emca -config dbcontrol db -repos recreate_) according to the new domain but some of the future not working like date,etc. can anyone help me how to rectify it plz.I am really confused that what's not working? What I have understood is that you recreated the EM repository. So where does "some of the future not working like date,etc." come into it? Are you checking date from EM ? Which application is not working, your application or EM or both or somethingn else? Tell us the complete version, error information and also post the output of
emctl status dbconsoleHTH
Aman....

Application is not working in Enterprise Portal (Access Denied)

Hi,
I have created one application..........This application contains one DropDownByKey element whenever i run this application all the material numbers are automatically populated from R/3....... once i selected material number all the fields related to that material number are displyed in my view..... It is working fine in my NWDS(WebDynpro).....
I have integrated this application into Enterprise Portal their i am not getting any data into DropDownList box from R/3.... when i run the application i am getting "ACESS DENIED" error ............
But i have another applicaton(FlightList) which is already integrated into Enterprise Portal..... its working fine......This is also accessing data from R/3.... but its working......
The material application is not working........
Please Help Me.....
Thanks & Regards
Ravi Shankar B
<b></b>

Hi,
How have you defined the property "WAS host" for the portal system that you have created for the back-end?
You might get this error if the way you have defined this WAS host property and the way you are calling the portal are different. For example, if your WAS host property is "<hostname>:<portnumber>" and you are calling your portal as "localhost:<portnumber>", then you will get this error.
Also are you connecting to your portal using the fully qualified domain name? Don't call the portal simply as
<i>http://<host>:<port>/irj</i> but call it as http://<host>.<domain>:<port>/irj.
Regards,
Satyajit.

Application is not working due to memory issue

Hi Friesnds,
Kindly help me regarding settings in java. Scenario is like that. I have one server having two jboss versions (jboss-4.2.3 GA and jboss- 3.2.6). Each having java memory (JVM settings) 1 GB. The total memory of that server is 3 GB.
Problem is that every two days my application is not working due to memory issue. Once i freed the memory (through run the commands - (1). sync
(2). echo 3 > /proc/sys/vm/drop_caches
Application works fine.
I heared that the above command (echo 3 > /proc/sys/vm/drop_caches) can't run frequently because of server crash.
Kindly help me regarding this issue and provide the resolution.
Let me know if you need more information from my side.
Thanks
Ashish Shukla

All of the above. I tested on 4 different networks and had no luck, I also had friends test my network and the other networks with their iPhones and all had no issues using FaceTime.
Also after I wiped my phone (erased all content and settings) I was able to successfully initiate a FaceTime call with no changes to my network and was also able to initiate another call when connected to another previously tested network that didn't work before. Once I restored from backup though, FaceTime stopped working again.
I did find this discussion: https://discussions.apple.com/thread/5163024?start=0&tstart=0
and tried the suggestions found there too. That discussion describes my issue I am having as well.

Application loader not working on blackberry curve 8310

Hi all,
I have some problem with my 8310. I want to install a asian langague, but application loader not working. I have a error message :
"The blackberry desktop software does not have
Blackberry device software for the device that
you have connected to the computer. Contact
your wireless service provider or system administrator"
blackberry desktop manager version 4.2.2.14
blackberry device manager version 4.2.2.10
application loader version 4.2.2.16
What is the good package to install ?
Thanks in advance.

hello, you have a 8310. You must use an OS for the exact model. Using one for 8300 or 8330 will not work.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Application does not work on firefox 3.5

If the application is not working in mozilla firefox 3.5 then we are not able to test it in any other browser through this tool.
What should be the fix for this issue

Hi Shilpa,
Can you please provide more details about your configuration and the symptoms of what is not working for you?
What OS are you using?
What version of Flash Player do you have installed? (You can find out here: http://kb2.adobe.com/cps/155/tn_15507.html )
Are you using Firebug and the BrowserLab for Firebug add-on, or are you just using BrowserLab standalone?
Does BrowserLab work in any other browser for you such as IE or Safari?
What are the exact steps you are taking and what do you see that you say BrowserLab is not working for you?
Mark

MAM application is not working for some users

Hi All,
Tha MAM application is not working for some users.Different users have different workcenters other than that I dont see any other change. When I run MAM30_090_GETLIST in the backend I can see the no of customized users.But I cant see same no of users in the MEREP_207 table for the Syncbo MAM30_090 and strcture id TOP in the middleware. There is a data when I checked under worklist monitor for that user. But neither the MAM application nor MAM data is downloading to that device.
If I use different user on the same device I can see the MAM application and MAM data.
What could be the wrong in this case. Any help would be highly appreciated.
Mobile Client:MI 70 SP 15 Patch 0 Build 200802280918
Middleware:SAP NetWeaver 2004s with Patch leve 15
Backend:SAP ECC 6.0
Application:MAM 3.0
Thanks and Regards,
Ameer.

Hi,
from your description the source of your issue is quite obvious: some of the MAM users configured in spro are not configured properly.
For T01 SyncBos the number of TOP records in merep_207 MUST be the same as number of headers returned by an appropriate getList FM in the backend.
You need to solve this before you can go any further.
Reason why a record is not recorded in MEREP_207 - getdetail failed for whatever reason. So execute MAM30_ML_getdetail for each of the users that is not replicated in the middleware and check if there are errors in RETURN table. If there is no error - one of the common reason for replication fail is when there are records in item tables that have duplicate primary keys.
Regards,
Larissa Limarova

I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries)

I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries).
Thank you for your help! - I did try looking for all available specs about Keynote on the Apple iTunes website, and found nothing that could help me. HELP!

1
Close all iWork applications
2
Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
3
empty the trash
4
shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
5
Reinstall Keynote by logging into the Mac App Store using download / install

I updated my Ipad 2 last night, and now my Kobo application is not working. Any ideas?

So, last night, updated my Ipad 2, it took ages, but went smoothly. Two things I noticed right away--my Kobo application is not working (opens, but bookmarked screen is blank), and when I went to the App store to see if I had missed a Kobo update perhaps, the APP update screen was frozen and wouldn't allow me to select ANY updates. Anyone have some advice?

Try giving it a reset. Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot and see if that helps.

MY WHATSAPP HAUTELOOK FACEBOOK APPLICATIONS ARE NOT WORKING WITH THE NEW UPDATE iOS 7 ITS DRIVING ME CRAZY! HOW CAN I FIX IT?

I DOWNLOADED THE NEW UPDATED VERSION FOR THE IPHONE !!!
AND MY APPLICATIONS ARE NOT WORKING AT ALL
WHENEVER I ENTER TO WHATSAPP A MESSAGE POPS UP FROM NOWHERE SAYING SOMETHING ABOOUT PUSH UP NOTIFICATION!!
AND THAT I SHOULD CONNECT IT TO ITUNES, THEN I CONNECT IT TO ITUNES AND ITUNES IS NOT LETTING ME SIGN IN WITH MY APPLE ID ITUNES IS NOT WORKING/!!!
ALSO WHENEVER I OPEN HAUTELOOK APP ON THE IPHONE IS FREEZING MY PHONE WITH THE PUSH UP NOTIFICATION WINDOW, AND I CLICK OK AND IT STILL APPEARS OVER AND OVER AGAIN
PLZ HELP ME!!!!!!!!!!!!!!!!!!!!!

If you do not have enough space, then you would have to free up more space.
You can also update via itunes on your computer.

What do we do if Applications are not working in iPod touch?and why?

What do we do ifif applications are not working in iPod touch?why??

Try here:
iOS: Troubleshooting applications purchased from the App Store
Things can happen for various reasons and most of the time the reason is never found but vry frequently it can be corrected.

TS1702 I upgraded software from Snow Leopard to OSX Lion. Now my Office Mac applications would not work

I upgraded software for my MacBook from Snow Leopard to OSX Lion. Now my Office for Mac applications would not work. Can anybody help? Thanks

Aribalto wrote:
I upgraded software for my MacBook from Snow Leopard to OSX Lion. Now my Office for Mac applications would not work. Can anybody help? Thanks
Quite seriously, though, if you wish to use MS Office to it's full potential and if you depend on it on a regular basis, then upgrading to Office 2011 is the only reccommended way to go. You can use the free Apps mentioned, learn to use iWorks (which I love, but others don't) or make your system a shambles and lose your easy to use interface by the other method. Deduct the cost of Parallels from MS Office and it becomes pretty cheap, if that is the only PPC program you wish to use, which is the norm as PPC is long gone from development.
MS Office 2011 is not expensive if it is one of your major work tools. Think of those who had to update their Adobe software!
Anyhow Cheers
Pete

Some of my applications is not working anymore.

Some of my applications is not working anymore.
I want to know why, and how to fix it

What do you mean by not working?
I would try in order:
- Resetting the iPod:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Deleting the app and redownloading it. This might result in loosing app data.
- Restore the iPod via iTunes. First from backup up and if problem persists, restore to factory defaults.

Weblogic Application redeployment not working

Similar Messages

Maybe you are looking for