Weblogic config restores wrong old files on boot

Hi,
I'm installing a new weblogic domain for an environment from a source env and once I configure everything in the config.xml and the surrounding domain config files I start the admin and everything is fine. The settings in the domain are correct.
Then I start one of the JVMs and during boot the old config.xml (from source env) appears along with its backups and uses the old config.xml.
Why does that happen?
I tried deleting domain_bak in servers dir, I cleaned all JVM cache but the old files still get restored. I see them listed in domain_bak's file __deleted_files_index__ but only their names are there, nothing more.
What to do??
Thanks.

Hi,
I understood that there is a managed server that is using the old config.xml; did you try deleting the managed server directory? I had a problem like this some years ago and I had to delete this directory (I had made a backup before) and then I started that managed server and a new directory was created with the new configuration.
Best regards,
Raúl

Similar Messages

Time machine cant restore my old files

I erased my hard-drive 2 days ago and i have been unable to restore my old files backed up with time machine. Every time i tried to restore the Address book or i Cal, it always says that i already have the same file and if i want to keep both or replace the old one. And if i do replace it, it seems to work but my Address book remain empty.
When i go through my backed files with the time machine machine, i can see some of my old data but i just dont how to restore them. Can anybody tell the right way of restoring the i Cal and the address book??
thanks

I had something simlar and discovered that the permissions on my backup disk we're completely and remarkably (in that the new owner or the entire backup was a non-administrator user on my system) changed.
My symptoms were like yours: backups from before a certain date not highlighted in white (i.e. not available for browsing via Time Machine).
My restore became a nightmare of knife-and-fork work. Very disappointing.
Please try this:
Browse your backup disk (i.e. the disk you pointed Tome Machine at) with Finder or Terminal. Down a couple of levels you'll come to a folder containing one subfolder for every backup taken. Go to one of the backups you cannot open via Time Machine (so any 12th Jan backup name will start with "2008-01-12...", and so forth).
Browse into the backup folder. The sub folders to open are:
1. the name of your hard drive
2. Users
In the ./Users folder there'll be a folder in there with your username. I f if, like mine, the permissions have been hosed then you'll be able to tell pretty easily.
If you're using Finder then do a Get Info on the "yourusername" folder and tell us what permissions are set. If you're using Terminal, do an ls -la on the same directory and report back.

Unable to restore System Recovery Files in desktop folder

I owned an HP Pavilion A6037C desktop computer (Running Vista). It began to give me serious issues in July so i used the HP System Backup and Restore program to create a backup of all my files. i saved these files on an external HD so i wouldn't lose my files if the computer crashed. This backup was created in a folder called MINWINPC. In that folder was this file name "Backup Files 2011-5-7 234595". in that folder was a file list
Backup.001.App
Backup.002.fbw
Backup.003.fbw
Backup.004.fbw
and so on ....
I have since removed the first computer (although i still have it in my posession), and have replaced it with an HP Pavilion P6245f desktop running Windows 7.
Now that i have a newer desktop in place i wanted to install some of my old files from my backup that is saved on my external hard drive. i've connected the external hard drive to the new computer and i've ran the Backup.001.App. It restored my old files to a folder on my desktop called "Shortcut to System Recovery Files". It's a rather large file (i believe 50 GB) that is stored in another folder titled "C". In this folder i can see the seperate file folders i'm assuming were from my original desktop. when i access my username and select for instance "My Pictures" folder, it shows a list of all my orginal files. When i double click a picture, it says :
"File not readable. You can not open this file. Please check the readability of this file."
when i try to open any other type of file (such as .pdf's or word documents, or spreadsheets), it basically says the same thing.
"Can not access the document C:\(filelocation). The document may already be open or a read only document. The name and path may be invalid. The document may no longer exist, or it may already be open".
PLEASE HELP   All i want to do is restore my pictures, documents, and emails .   HOW CAN I RESTORE THESE FILES TO MY NEW COMPUTER ????????

I owned an HP Pavilion A6037C desktop computer (Running Vista). It began to give me serious issues in July so i used the HP System Backup and Restore program to create a backup of all my files. i saved these files on an external HD so i wouldn't lose my files if the computer crashed. This backup was created in a folder called MINWINPC. In that folder was this file name "Backup Files 2011-5-7 234595". in that folder was a file list
Backup.001.App
Backup.002.fbw
Backup.003.fbw
Backup.004.fbw
and so on ....
I have since removed the first computer (although i still have it in my posession), and have replaced it with an HP Pavilion P6245f desktop running Windows 7.
Now that i have a newer desktop in place i wanted to install some of my old files from my backup that is saved on my external hard drive. i've connected the external hard drive to the new computer and i've ran the Backup.001.App. It restored my old files to a folder on my desktop called "Shortcut to System Recovery Files". It's a rather large file (i believe 50 GB) that is stored in another folder titled "C". In this folder i can see the seperate file folders i'm assuming were from my original desktop. when i access my username and select for instance "My Pictures" folder, it shows a list of all my orginal files. When i double click a picture, it says :
"File not readable. You can not open this file. Please check the readability of this file."
when i try to open any other type of file (such as .pdf's or word documents, or spreadsheets), it basically says the same thing.
"Can not access the document C:\(filelocation). The document may already be open or a read only document. The name and path may be invalid. The document may no longer exist, or it may already be open".
PLEASE HELP   All i want to do is restore my pictures, documents, and emails .   HOW CAN I RESTORE THESE FILES TO MY NEW COMPUTER ????????

HT5096 I back up wrong one. I select wrong file when I restore my whole files to my desktop. Right now my desktop looks like my laptop. How can I restore or back to my old desktop?

I got a mail from apple that I need to replace my hard drive ( recall). I back up in my timecapsul and restore all my files. After I finished my restore files I realized that I did my laptop one....not desk top files so my desk top looks exact like my lap top.
I whole design program is different....I tried to restore files but I couldn't....whole system looks different....I need help...Im not good at using computer....I just need to back my desk top like previous one....please please help me
How to restore my desktop files.....How can I undo this step?? This is a night mare....please please help me.....

Thanks for the comment Linc Davis. I really appreciate that. I tried do what you told, but it doesnt work....i need to start over like pc so i can get back my old desktop.....this is nightmare!!!! i dont know what to do.....command +R doesnt work......

What's wrong? Verify and compare Cisco 2901 config after loading old config from Cisco 2801

Hi Cisco Community / Friends,
I am new to this site though I have cisco account for many years. I am a CCNA ,I passed my certification on January 2013 I seldom use and utilized my skills on networking becuase of my type of work. I am Project Eng'r working in a System integrator company . Anyway, I would like to ask assistance on the configurations of my Cisco router for this gov't projects.. Here's the situation.
We have a new project for the VSAT Comm'n of Coast Watch Station , The VSAT was installed 7 years ago. The VSAT was only used for a year by this Gov't agency because of subscription issue. Now, they wants to revive and use their VSAT facilities for the Coast watch monitoring. Now, some of this routers are working up to now and for some site are already defective so I need to replace the old 2801 router with a new equivalent model which is Cisco 2901. My plan was just to load the old config into the new Cisco 2901 router. However, after loading it to the new router, I am a little worried because I've got some errors received. I load the old config by copying the old files, edit it in notepad, and load the config using Secure CRT (terminal emulator). When I copy the old config of cisco 2801 to new router cisco 2901 , below are the command not recognized on Cisco 2901. What's wrong ? What are these commands for?
Appreciate your comments and help on this matter.. Thank You very much
Note: I Attached the original config from Cisco 2801 and the other file is the config after I load the config file to Cisco 2901.
(Errors see below)
CWS_4_Pandami(config-erm)#mmi polling-interval 60
                         ^
% Invalid input detected at '^' marker.
CWS_4_Pandami(config-erm)#no mmi auto-configure
                               ^
% Invalid input detected at '^' marker.
CWS_4_Pandami(config-erm)#no mmi pvc
                               ^
% Invalid input detected at '^' marker.
CWS_4_Pandami(config-erm)#mmi snmp-timeout 180
                                                        ^
% Invalid input detected at '^' marker.
CWS_4_Pandami(config-if)#interface GigabitEthernet0/1
CWS_4_Pandami(config-if)# description ===CWS4 SAT Modem===
CWS_4_Pandami(config-if)# bandwidth 256
CWS_4_Pandami(config-if)# ip address 192.168.42.1 255.255.255.0
CWS_4_Pandami(config-if)# duplex auto
CWS_4_Pandami(config-if)# speed auto
CWS_4_Pandami(config-if)# priority-group 1
                                                    ^
% Invalid input detected at '^' marker.
CWS_4_Pandami(config)#access-list 100 permit ip any any dscp cs5
CWS_4_Pandami(config)#priority-list 1 protocol ip high list 100
                          ^
% Invalid input detected at '^' marker.

Hi
From Cisco's website:
The Modem Management Interface (MMI) is software that enables auto-provisioning for the Cisco 827 routers. The MMI uses a fixed PVC to communicate with the Proxy Element (PE) residing on the digital subscriber line access multiplexer (DSLAM). Using MMI, the Cisco 827 router updates the running image and downloads the prescribed configuration using a configuration file or configuration values in a provisioning information database.
The customer premise equipment (CPE) can be automatically configured using the Cisco DSL CPE download, but it can be configured only with the image provisioning feature.
So because this is your device, you don't want to use MMI anyways.
And "priority-list" is QoS. Probably that QoS-command is old and removed, because now QoS is configured using class-maps and policy-maps.

Hi, Had boot issue and got the following from DU repair function on Macintosh hd: updating boot support.....Error: Disk utility can't repair this disk.....reformat and restore backed up files. How is that done or do I go to Genius?

In reference to question the computer gave no warning but lost internet connectivity. I shut down for a while and when returned it would only boot to gray logo screen with spinning gear. Ran disk utility and on Mac HD drive it stopped after "Updating boot support partitions as required". Then in red: Error: Disk utility can' repair this disk ....disk, and restore backed up files. I'm running OS X 10.8 and had just updated the iOS about three days ago. Not familiar with reformat process on MacBook Pro and would like some ideas whether I should go to the Genius Bar here in Sydney or try it on my own. I have been using time machine to back up to a 1TB La Cie drive right up to the crash. Thanks for any advice.

Well it turned out the drive was shot. Took it to the genius bar yesterday and they ran a test on the drive before trying the restore routine again. Drive failed.
Replaced the drive and got the MBP back today. Pretty quick and decent service once you get an appointment.
Now having trouble figuring how to do the Time Machine saved files. Have several applications which I'd like to keep but not sure how to trans the apps from my backup to the new. Hunting for answers on that on the web.
Thanks for you help, Eustace.

Having trouble restoring old files from an external Time Machine back-up to a new internal hard drive...HELP!

O.k. So my main hard drive died on my iMac and I had to replace it. I have my old system backed up on my external with Time Machine. How do I access it to get my old files back on my new hard drive? I have read multiple forums and I have yet to find a solution. I was told that when I first turn the computer on and get to the third screen, it would ask me if I wanted to restore from a previous back-up. It did but it didn't show my external until I went through the set-up and got to my home screen. The drive showed then. It also asked to install updates...and I did. So everything is up to date. I have not turned time machine on yet because I'm affraid that if I do, it will erase my old back-up on my external. I tried using the Migration Assistant in Utilities and all I get is the spinning wheel when I tried to get that to work. So now I am here asking for help. I'm not very hopeful that I'm going to be able to get all of my old files back... Any help would be greatly appreciated.

Thank you for the video link. I did it pretty much exactly the way the young man explained. The one thing I didn't do was click "customize" as he does and unclick the multiple language support and he also clicks "rosetta" to support older programs. I wonder if that's the issue? The guys at Macmall told me that I would need to update the o.s. before I restored. I did that originally but have since (as mentioned before) erased the main drive. I noticed that when he does his install, his external drive does not show up on the list in which you want to install the o.s. on... should I unplug my external? I'm just trying to look at ever detail. I know the recovery file is there. The one thing it (the external) did say before I started posting here was "in progress". I'm not sure what that means? I promise I'm not an idiot. I consider myself an above average user. I usually help other that have issues... but I've yet to restore from a Time Machine back-up and I'm looking forward to learning how to do it.... the right way. I appreciate all of the advice. I have some pretty important files on my external back-up. I am really hoping that this is possible. I'm beginning to think the external is where the issue lies. The "in progress" next to the file name concerns me. I know there's a lot of data on the drive because it's nearly half full. So there's stuff there....
Deep breath in...... reeee laaaaaaaxxxx

My daughter's iPhone 3gs has just been replaced by Apple. When she tried to restore her backup files she was told to upgrade to itunes 10, but she can't because her Macbook is too old to run it. What do we need to do?

My daughter's iPhone 3gs has just been replaced by Apple. When she tried to restore her backup files she was told to upgrade to itunes 10, but she can't because her Macbook is too old to run it. What do we need to do to get all her stuff onto the new phone?

Here's what I'd do, go back to the Apple store, take the phone & computer. Ask the geniuses how to fix this since they replaced the phone. You never know, they may just update the computer for free...its happened before...can't gurantee it will happen for you, but worth a try.
Otherwise, you're looking at purchasing a retail copy of Leopard, however if her computer can handle Snow Leopard you can purchase the $29 upgrade disk & install a full copy of SL.

Old mac wont boot xcpt via firewire, want to move iphoto files from old to new, where are the pics stored?

old mac wont boot xcpt via firewire, want to move iphoto files from old to new, where are the pics stored?

Photos are stored in your home folder (~pictures).
Barry

I just had to restore my entire system. i cannot find some of the old files on time machine

i only wanted to restore a few files that i had on my time machine backup. the problem is that i cannot find those files when i pull up the time machine. help, please.

If they are truly old files that you deleted at some point in the past, then they may have been erased by Time Machine for more recent backups. In that case they would be gone.

Why are some of my old files on my mac after I do a complete restore?

Whenever I get a new Mac or I restore my old one some of my old files such as music photos and movies are on my new one. I think it is auto saving some of my email attachments. It seems a lot of the images where ones that I took or veiwed with my Ipod/iPhone. Is there anyway to stop this?

If i deauthorize this PC can i reauthorize it after i do a complete restore thus saving that precious last authorization in case of an emergency?
Yes.
Note that if and when you reach the maximum of five authorizations, you can (once per year) deauthorize all the systems. There will be at that time a button in your iTunes Store account information for performing that deauthorization. You could then authorize those systems you're using.
if i create a new i tunes account can i play the songs currently on my ipod and those purchased with the old account?
If you mean a new iTunes Store account, that account authorization would only be valid for content purchase through that account. It will have no effect on authorizations from your current iTunes Store account.
Regards.

Restoring old files to bb z10

Is there a way to get my latest back up file onto my z10 if my bb id is different from when i backed it up to when i restored it to factory settings? if anybody can help i would deeply appreciate it. i am mostly concerned with restoring my documents.

Reference http://supportforums.blackberry.com/t5/BlackBerry-World/How-to-regain-access-to-your-BBID/m-p/254671...
See the paragraph concerning deleting a BBID using information in the original email you received when you created the BBID. If you followed those directions, then according to the post, you should be able to create a new ID with the same username and email address and everything would transfer to the new ID. I don't know if that would then allow you to restore the old backup if you signed in with the new ID created with the old credentials. Maybe. However, if you simply deleted the ID, then for certain you are out of luck.
If you just deleted the ID then it is gone, doesn't exist anymore. If you created a new ID with the same username and password it will effectively be a different ID.
- Ira

MAC OSX 10.3.6 having Boot Problems(Gray Screen with Spinning wheel all the Time) ,How to restore all the files without Mac Startpup Disc,still is not possible i want to download full CD from Apple Site, Is It Possible to Download!

Hi Frnds,Small Favour for me,...
MAC OSX 10.3.6 having Boot Problem(Gray Screen with Spinning wheel all the Time) ,How to restore all the files without Mac Startpup Disc,still is not possible i want to download full CD from Apple Site, Is It Possible to Download!, Windows 7 is working perfectly , can i restore any files in MAC OSX 10.3.6 through Windows 7, or i need the MAC OSX 10.3.6 Bootable Files i need to enter the MAC OSX....

Hi Frnds,Small Favour for me,...
MAC OSX 10.3.6 having Boot Problem(Gray Screen with Spinning wheel all the Time) ,How to restore all the files without Mac Startpup Disc,still is not possible i want to download full CD from Apple Site, Is It Possible to Download!, Windows 7 is working perfectly , can i restore any files in MAC OSX 10.3.6 through Windows 7, or i need the MAC OSX 10.3.6 Bootable Files i need to enter the MAC OSX....

HT1414 How can I retrived my old files after iOS was restored by 1 of the apple store?

How can retrived my old files, games and pictures after iOS was loaded?

Restore off of your computer, and set up your phone off your previous back-up.

I recently took my imac in for a recall on the hard drive, they replaced my hard drive, i used time machine to restore all my files. Now when I turn time machine on it says back up failed not enough space, it is not overwriting old back ups.

I recently took my imac in for a recall on the hard drive, they replaced my hard drive, i used time machine to restore all my files. Now when I turn time machine on it says back up failed not enough space, it is not overwriting old back ups. Why? Please help

http://pondini.org/TM/FAQ.html

Weblogic config restores wrong old files on boot

Similar Messages

Maybe you are looking for