Weblogic configuration wizard is not displaying correctly on windows 7

Please check the image attached. link .
I only see buttons and check boxes, no text in it. It is only happening for oracle wizards. Other apps are working okay. This is on windows 7, virtual machine access via VM Player.

I found the solution to my problem: I installed the Super facebook App. AKA (Social fixer)

Similar Messages

Indesign CS3 .indd icons not displaying correctly in Windows 7 64 bit.

GDay InDesign Gurus.
Ive just recently moved over to Windows 7 64 bit and have noticed that my InDesign .indd file icons are being displayed as a blank file type instead of the IND icon type. The .indd files open up correctly in InDesign upon double clicking so the issue is more of a convenience one. I have checked that the file association has been set to InDesign which is all ok as the files open up fine just there is no IND icon displayed in the file; my Photoshop and Illustrator files are all fine and display correctly but it would be nice if I could easily see my .indd files.
Ive searched the web for a solution but have not been able to fine one associated to Windows 7 64 bit.
Any help you guys can provide would be highly appreciated.
Thanks guys.
Regards Stuart K

http://forums.adobe.com/message/1319918#1319918
Bob

Report Links in OBIEE 11g Dashboard not displayed correctly

In the Dashboard pages the Report Links for Export are not displayed correctly .
Instead of showing the multiple options for export/download it shows just text.

It can be done by doing below steps.
1) before doing this take a backup of instanconfig.xml file and do the below changes...
You can configure various options that change the way that right-click interactions are handled in views for an analysis at runtime. The elements in the instanceconfig.xml file specify the default settings for a new or upgraded analysis. You can edit the properties of an analysis in Presentation Services to modify how the analysis handles right-click interactions in views.
Before you begin this procedure, ensure that you are familiar with the information in Section 3.4, "Using a Text Editor to Update Configuration Settings."
To manually configure for interactions in views:
2) C:\Oracle\Middleware\instances\instance1\config\OracleBIPresentationServicesComponent\coreapplication_obips1\instanceconfig.xml
Open the instanceconfig.xml file for editing,
3)
Locate the sections in which you must add the elements
Include the elements and their ancestor elements as appropriate, as shown in the following example:
<ServerInstance>
<Analysis>
<InteractionProperties>
<InteractionPropertyAddRemoveValues>false</InteractionPropertyAddRemoveValues>
<InteractionPropertyCalcItemOperations>false</InteractionPropertyCalcItemOperations>
<InteractionPropertyDrill>false</InteractionPropertyDrill>
<InteractionPropertyGroupOperations>false</InteractionPropertyGroupOperations>
<InteractionPropertyInclExclColumns>false</InteractionPropertyInclExclColumns>
<InteractionPropertyMoveColumns>false</InteractionPropertyMoveColumns>
<InteractionPropertyRunningSum>false</InteractionPropertyRunningSum>
<InteractionPropertyShowHideSubTotal>false</InteractionPropertyShowHideSubTotal>
<InteractionPropertySortColumns>false</InteractionPropertySortColumns>
</InteractionProperties>
</Analysis>
</ServerInstance>
4) Save your changes and close the file.
5)
Restart Oracle Business Intelligence.
Mark as correct if it is helpful :)
Thanks.

HTML Content not displayed correctly in UWL

Hi all,
I have setup UWL to connect to SRM 5.0 system. I have no problem retrieving alerts from the backend. However, alerts with HTML content are not displayed correctly in the UWL. Instead of parsing the HTML content, the html tags are displayed instead.
Am I missing some configurations here?
Thanks in advance.

Hi Benny;
Please see:
My Oracle Support FAQ [ID 747242.5] << What are the browser requirements for accessing My Oracle Support?
If you have still problem you can go wiht SR
Regard
Helios

Outlook web login screen not displaying correctly on Exchange 2007 service pack install

Hello everyone,
I believe our exchange server installed a service pack 3 update and after rebooting the server, we noticed that the Outlook web access login screen is not displaying correctly. The page looks white with some black X's (I think that's where the
pictures/background images used to be). We tried to restart the ISS service with no luck. I would appreciate any help you guys can provide.
Thanks,
Brian Kourdou

Hi,
I have seen this issue in another similar thread, that issue was solved by re-creating the OWA virtual directory.
Please try the following steps to solve this issue.
Open EMC, navigate to Server Configuration -> Client Access, under Outlook Web App tab, double-click owa (default web site) properties.
Then check InternalURL, ExternalURL, Forms-Based Authentication settings ect
Open EMS, use Get-OwaVirtualDirectory get the list of virtual directories and identify the directory which is giving the problem.
Remove it with this command
Remove-OwaVirtualDirectory “owa (Default Web Site)”
Now create it again with the following command
New-OwaVirtualDirectory -OwaVersion “Exchange2007″ -Name “owa (Default Web Site)”
Then configure the “owa” virtual directory settings like InternalURL, ExternalURL, Forms-Based Authentications etc… & check the OWA by logging with some test users.
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

Flash not displaying correctly for only one web site

In the last 3 or 4 days I seem to have problems with the flash content of one single web site not displaying correctly from my laptop. I have the same problem from both IE (version7.0.5730.11) and from FF (3.5.8). The site works fine from my desktop system so it's not the site specifically. The site (www.transparent.com/wotd/today/spanish.htm) has an embeded flash segment that does not display correctly and thus I can't click on two of the embedded buttons. It also does not display the background pattern for the flash. I'm running flash 10.0.45.2 based upon right clicking from within the embedded flash which takes me to the Adobe page with my version info. The Adobe page seems to display fine.
As far as I know I'm not having problems with another instance of flash - only this site.
Any thoughts on how to diagnose the problem? I've not added any new programs since this website stopped working but do have some background "tune up" programs that run. I'm assuming some settings are out of wack but don't know where to start looking. Any help folks woulc provide would be appreicated.

Well, that is hard to tell. Like I said the website may have updated their technology. Just because it works with the Desktop, doesn't mean there is not a reason that the laptop might not have a problem. You have 2 different systems and
most likely different configurations.
You may want to check Tools and in the add ons for both, look for Shockwave Flash Object...ActiveX Control..Flash10e.ocx should be installed and enabled.
Also for each check C:\Windows\System32\Macromed\Flash Right click the Flash folder and make sure for IE that the files are vs 10.0.45.2 by checking the properties.
If you have the correct Flash files and the correct SWO then, some other cause would be looked at.
It has been my experience to not "assume", but verify:-)
Thanks,
eidnolb

Images inside pop-ups in CHM not displaying correctly

I am generating a CHM using RoboHelp 10 on a Windows XP machine.
I have a few pop-ups in some topics. These pop-ups contain screen shots. After generating the CHM, when I click the pop-ups to view the screen shots, they are not displayed correctly. That is, half of the image does not appear and there are no horizontal scroll bars either to scroll. This happens for pop-ups that appear on the left side of a topic. The images inside pop-ups that appear to the right side of a topic appear fine when clicked.
The help file was originally created using RH 7. I upgraded the source files to RH 10 successfully and there were no errors during the upgradation.
I even tried generating the CHM on other systems with RH10 and the same system configuration as mine but ended up with the same results. I assume there is some compatibility issue maybe between RH 7 and RH10.
Looking forward to any helpful insights here as this is pretty urgent at the moment for me to resolve the aforementioned issue at the earliest.

Hi Rick,
Thank you for the response. Alas, updating the DHTML effects doesn't help. In the project that am working, I have used hyperlinks that are marked to be displayed as auto-sizing pop-ups.
I also tried editing the eHlpDhtm.js file as mentioned in the thread here, https://forums.adobe.com/thread/1297423#expires_in=86399993&token_type=bearer&access_token =eyJhbGciOiJSUzI1NiIsIng1dSI6I…. But that was of no avail either.
Do you have any other insights here?
Regards,
Anamika
P.S. Am using RH 10.0.1.292.

When I excute rsplan ,but the application is not displayed correctly why?

when I excute rsplan ,but the application is not displayed correctly in our explore ,who can tell me what reason? 3ks very much

Hi,
please take a look at the following note:
919850 Problems with the planning modeler and the planning wizzard
Hope this helps ...
Matthias Nutt
SAP Consulting Switzerland
thanks Matthias Nutt 's reply
thanks very much
throuht you answer I have kown some about this ,and now I can modling throuht URL,but still can not start rsplan in gui ,whether I must to configuration a web service ,and that you can give me something about how to step to step configuration that,
thanks again

Options do not display correctly

When I go to Tools>>Options the VI Server: Machine Access page does not display correctly instead I get the message "Cannot display selected Category page". The VI Server: Configuration page _does_ display correctly.

Don't know if this will fix it, but try renaming the LabVIEW.ini file in the LabVIEW directory to something like LabVIEW.ini.bak. Then launch LabVIEW and see if you can access that page. If you do, then you might have a corruption in that file, which stores configuration information as well as preferences. You can try to see if the old file contained the line "server.tcp.acl=... (long list of numbers)" and delete it to see if that fixes the problem without having to resort to creating a new preferences/config file (assuming that fixes it).
Message Edited by smercurio_fc on 07-08-2009 01:29 PM

Photoshop TIFFs with layer masks do not display correctly

I am sure other people must have this problem, but I cannot find any related posts so here goes:
I open an image using the "open in external editor" command (typically a RAW file converted to a TIFF), edit in Photoshop and save the file (as a TIFF, I do not use PSD format)
If the PS edit contains any layer masks or alpha channels (masks in the channel pallet) it does not display correctly when it reappears in Aperture. Only the top most mask will display, assuming I have multiple layer masks in the PS edit.
Not only will the TIFF only appear as the mask in Aperture, but Aperture will print or email the mask, not the PS edited file as it should appear.
It seems that Aperture only recognizes the layer mask (or alpha channel mask) as the image, and all the other layers etc are disregarded.
Is this a confirmed bug, or is there some setting I have not correctly configured or some other issue?
I love Aperture, but this problem is nearly a deal-breaker for my workflow, and would be for any serious photoshop user, I would imagine!
I cannot believe this is still a problem in version 1.5, which is the version I am using (thus my system is 10.4.8)

David,
I assume you mean in the edited PS TIFF file:
In different cases I have either:
A. A TIFF file with layer a layer mask
B. A TIFF file with multiple layer masks
C. A TIFF file with an alpha channel mask
D. A TIFF file with multiple alpha channel masks
E. A TIFF file with any combination of the above
the outcome is the same, they all do not display correctly in Aperture. It does not seem to matter if the file was opened in PS from Aperture via the open with external editor command or if it was worked on outside Aperture entirely then imported. I do have maximize compatibility in PS checked (though I understand this is only for PSD files, though perhaps I am wrong here)
any thoughts?

Umlauts are not displayed correctly in different programs

Hello!
I live in germany, but my locale is set to "en_US.UTF8" because I like to have everything in english.
I do not have any problems with umlauts on the machine, but when I connect with sFTP oder Samba to it, the umlauts in files are not displayed correctly.
Look at this example
The upper word is how it looks in "ssh putty" (=locally on the machine), the bottom one is from "filezilla" (from my windows host)
This is my locale
locale
LANG=en_US.UTF-8
LC_CTYPE="en_US.UTF-8"
LC_NUMERIC="en_US.UTF-8"
LC_TIME="en_US.UTF-8"
LC_COLLATE="en_US.UTF-8"
LC_MONETARY="en_US.UTF-8"
LC_MESSAGES="en_US.UTF-8"
LC_PAPER="en_US.UTF-8"
LC_NAME="en_US.UTF-8"
LC_ADDRESS="en_US.UTF-8"
LC_TELEPHONE="en_US.UTF-8"
LC_MEASUREMENT="en_US.UTF-8"
LC_IDENTIFICATION="en_US.UTF-8"
LC_ALL=
When I create a file "asd_aöü" locally on the machine (with the help of ssh - putty), it looks fine, but when I connect by samba or filezilla again the umlauts are not displayed correctly.
Do you understand my problem? What can I do?
Thanks!
Last edited by cyberius (2011-02-19 10:12:19)

Did you check the locale settings on your Windows machine?

Date can not display correctly in excel from .jsp

Hi,
I create a .jsp report to export the data to excel. the report run OK, except the date field can not display correctly.
for example in database :start date ='01-oct-2003'
in the except it displays to 02/06/02.
It seem all the date field can not be control in the report, and control by somthing else
Doese anyone come accross this problem?
Thanks

Hi Rong,
Are you using the following demonstration to build your JSP?
http://otn.oracle.com/products/reports/htdocs/getstart/demonstrations/index.html
(Output to Excel with Oracle9i Report)
I tried to do the same, and inserted a database date field in the JSP using Reports. I found the following:
While making the template inside Excel, if I make sure that the format of the date cells is "Date" - some particular date format, the date field values from Reports does not get exported correctly.
However, if you make sure that inside the template, the format of the date cells is not date, but "General", then the date field values are correctly exported to Excel.
Pl try it and let us know.
Navneet.

BPS_WB: Please Wait Dialog Box not Displaying correctly???

When we switched our Planning Interfaces to using the New Planning Interface Design the Please Wiat Dialog Box does not display correctly.
When a Request is fired and the client is waiting for the Response all that shows is a white block in the middle of the screen with no dialog screen or other information.
It maybe associated with the following:
function bpsOpenURLSelf(doIt, url)
      if (doIt) {
        try {
            document.body.style.cursor = "wait"; // works only in IE
        } catch (ex) {} // ignore
        open(url,'_self');
      // note: function with doIt==false is used to check
      //       existence of the opener window
Or it may be associated with a CSS issue?
I am currently using IE 6.0.2900.2180.
Any thoughts would be appreciated!
Thanks, ATC

Hi Alan,
please implement SAP note 845305.
Regards
Marc
SAP NetWeaver RIG

Search box not displaying correctly in Safari

How can the search bar on the Apple site not display correctly in Safari? I find this odd that Apple would allow this. It displays like 2 search boxes overlapping each other. It still functions correctly but it is a little embarrassing since I am always bashing windows pro browser display.

Hi
Welcome to Apple Discussions
Might be a corrupted cache or cookies issue. First, go to Safari Preferences>Security>Show Cookies. Type Apple in the Spotlight panel. Highlight/remove the cookies. Then, go to the Safari Menu>Empty Cache. Try the Apple site.
If the double search panel still appears, go to the Finder: Your User Account>Library>Caches. There, move to the trash the com.apple.safari file. Restart Safari and try the Apple site again.
Post back

Why is Times New Roman not displaying correctly in Illustrator CS5?

Alright, so I'm running Windows 7 64-bit and Illustrator CS5.
Times New Roman Regular does not display correctly on my machine when using Illustrator CS5, but Bold, Italic, Italic Bold display just fine. Times New Roman does display correctly in every other program I use. InDesign, Word, etc. I've attached a screenshot to show what I mean. Please help!

Hi,
I have an absolutely same bug - looks like font substitute
I had reinstall font family - no changes. Win 8.1 Illustrator CC.

Weblogic configuration wizard is not displaying correctly on windows 7

Similar Messages

Maybe you are looking for