Weblogic Console hangs when connecting to one of two servers in a cluster

          Hello,
          Please email me as well as posting reply if possible as resolution is required
          immediately.
          We have two Weblogic 5.1 servers (named server1 & server2) running in a cluster
          using multicast over a VLAN and a DNS entry of "mycluster" to point to the list
          of two IP addresses.
          Both servers say they have joined the cluster upon startup, however, only one
          of them (server2) reports when the other one (server1) has joined, but not vice
          versa.
          Also, the Weblogic Console only displays server1 in the cluster, and hangs when
          it tries to attach to server2, which generates exceptions on server2. The error
          is as follows:
          <Kernel> ExecuteRequest failed. NullPointerException at weblogic.cluster.MemberStash.getManagedSubObjects(MemberStash.java:259).
          I expect this would also prevent replication from working properly.
          One other thing that might be related to the above is that when the URL "mycluster:7001"
          is used directly in the web browser, it sometimes (not always, not sure if it
          matters on which machine) gives the error: "Inconsistent cookie: primary !=
          me".
          Two IIS web servers are being proxied to the cluster URL, and round-robin load
          balancing of the app servers appears to work fine from this perspective.
          Both servers appear to be working properly otherwise.
          Many thanks for any clues,
          Ben
          

          primary != me occurs when you restart WLS but do not exit the browser, then hit
          WLS (the browser has a stale cookie).
          Mike
          "Ben Yenko-Martinka" <[email protected]> wrote:
          >
          >Hello,
          >
          >Please email me as well as posting reply if possible as resolution is
          >required
          >immediately.
          >
          >We have two Weblogic 5.1 servers (named server1 & server2) running in
          >a cluster
          >using multicast over a VLAN and a DNS entry of "mycluster" to point to
          >the list
          >of two IP addresses.
          >Both servers say they have joined the cluster upon startup, however,
          >only one
          >of them (server2) reports when the other one (server1) has joined, but
          >not vice
          >versa.
          >Also, the Weblogic Console only displays server1 in the cluster, and
          >hangs when
          >it tries to attach to server2, which generates exceptions on server2.
          > The error
          >is as follows:
          ><Kernel> ExecuteRequest failed. NullPointerException at weblogic.cluster.MemberStash.getManagedSubObjects(MemberStash.java:259).
          >I expect this would also prevent replication from working properly.
          >
          >One other thing that might be related to the above is that when the URL
          >"mycluster:7001"
          >is used directly in the web browser, it sometimes (not always, not sure
          >if it
          >matters on which machine) gives the error: "Inconsistent cookie: primary
          >!=
          >me".
          >
          >Two IIS web servers are being proxied to the cluster URL, and round-robin
          >load
          >balancing of the app servers appears to work fine from this perspective.
          >Both servers appear to be working properly otherwise.
          >
          >Many thanks for any clues,
          >Ben
          

Similar Messages

  • Roland UM-ONE  CD-ROM does not mount on iMac OS 10.8.2 Roland driver for 10.8 installed as directed. No power ready light shows when connecting UM-ONE. System Profiler shows it, but not configured. Older UM-1X works fine. UM-ONE works on Dell Windows XP.

    UM-ONE
    Roland supplied CD-ROM does not mount or read by iMac OS 10.8.2, works with old TiBook and Dell laptop, however.
    Got latest driver from RolandUS.com (um_1mx8d_v100), installed as directed.
    No power ready light shows when connecting UM-ONE.
    System Profile shows it there, but not configured.
    With Audio MIDI Setup opened to MIDI Studio window, UM-ONE does not appear.
    Tried many things without success. Tried swapping UM-1X (formerly on Dell laptop) with UM-ONE. UM-ONE installed and worked there without any issues. MIDI instrument communicates fine.
    The UM-1X works without complaint and as expected when connected to any USB port on either the Dell or iMac, even a hub or keyboard port, just as it formerly had before changing operating systems, etc. It is old, but reliable.
    Upshot is, for now, that UM-1X works with either the Dell or the iMac, but is currently attached to the iMac. UM-ONE (2011 model) only works with the Dell (Windows XP).

    Same problem here! The only difference is that I'm using a MacBook pro 13 inch (2011)

  • ACE 20 | When connection to one serverfarm/VIP cross 1000 all other serverfarms and VIP of that context are facing very very slowness

    Dear Community
    Hi !!
    We are  Facng a typical issue and scraching Head since sometime Now and Now seek help and sugesstions
    I have a ACE with 10 Context. Now There is a Particular Context  which have 6 server farms and all have under different VIP.
    Have raised Multiple TAC cases and Captured Millions of Packets but no reason. The ACE resource and CPU Usage is Normal and no increase noticed.
    Issues Happening is that when connection to one serverfarm cross 1000, all other serverfarms and VIP  of that context  are facing very very slowness ,and  they have no relation with each other both Physically and Fictionally
    If any of you have heard of similar issue can you refer me a solution if the issue is with ACE 

    Hi Shirshendu,
    Replied to you on other thread.
    Regards,
    Kanwal

  • 31.3.0 hangs when connecting to my IMAPS server (problem with intermediate certificates or SSL in general?).

    After update to 31.3.0 Thunderbird hangs when connecting to IMAPS server aie.de (intermediate certificates in chain). No error message is given, Thunderbird just hangs with out updating the subject lines of the inbox.

    It is a configuration problem of the courier imap ssl daemon, resolution is shown [http://xf.wiki.mithi.com/index.php/Error_observed_in_/var/log/messages_log,_imapd:_couriertls:_accept:_error:1408F10B:SSL_routines:SSL3_GET_RECORD:wrong_version_number#Resolution here]

  • ITunes 11.1 hangs when connecting to iCloud. How can I download 11.0.5?

    Arrrrgh! iTunes 11.1 hangs on my system Windows 7 x64 when trying to connect to iCloud. It runs fine if I start it in safe mode (I have no third party plug-ins installed).
    How do I download iTunes 11.0.5???? I've been searching on the Internt for the last 1/2 hour and it looks like Apple prevents users from downloading 11.0 once 11.1 (piece of crap) is out. WHY?????????

    Hi,
    I've been able to resolve the problem of iTunes crashing by emptying the SycServices folder - by following the steps described at the foot of this comment. I've also been able to sync my iPhone contacts with my Address Book ...but I cannot sync my Address Book with Outlook 2011 ...  and thus my iPhone linking to Outlook 2011.
    I'm aware that 'Sync Services' were depreciated in 10.8 and was hoping that this would be restored in full in v: 10.9.3. I understand that MicroSoft needs Sync Services to be reintroduced into the OS to enable the sync to work again for linking up with Outlook 2011 - which appear to be blank in my Sync Services preferences window as follows ....
    I would be mighty grateful for any ideas/solutions on how to resolve this problem. Synching Outlook 2011 with my iPhone was so easy in the past!
    Simon
    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Application Support/SyncServices
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. Log out or restart the computer and empty the Trash. Test.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
    Re: iTunes ver 11.2.1 hangs when connecting to iPhone 

  • Catalyst switch hangs when connecting via console port

    Hi,
    I've just started work for a company - they have no network documentation or knowledge of their current set-up whatsoever.
    For the LAN in the office they have Cisco Catalyst WS-C3524-XL switches. But it doesn't seem like these are even configured with an IP address for management purposes.
    So, I thought I would connect via a console cable to have a look at their configurations and also to investigate some performance problems some users were having on the LAN.
    BUT - when I connected to the console cable, all the switch LEDs stopped flickering happily and went solid and everyone in the office lost their network connectivity! (I wasn't popular!)
    Rebooting the switch with the console port still connected had no effect - the LEDs remained solid and there was no network connectivity. However, when I removed my console cable, everything started working again!
    Does anyone have any ideas a) what can have caused this and b) how I can resolve this problem and connect to the switches without disrupting all the other users!
    Note: I subsequently connected to a spare WS-C3524-XL switch using the same laptop and same console cable without any problems.

    Hi,
    thanks for the response.
    no, I can't login to the switch(es) at all. There seems to be no response from hyperterminal at all. (Then I noticed that the LEDs had gone "solid" and that everyone started to complain they had lost network connection!)
    Even when I powered off and powered on the switch with the console port still connected, nothing appeared on the hyperterminal screen.
    However, as mentioned, I'm able to connect to one of our spare switches using the same settings, same laptop, and same console cable - so I guess that would rule these things out as being the cause?
    Its definitely a strange one, especially as it seems to be affecting all 3 of the live switches!

  • Console hanging when doing LDAP query

    Hi,
    I am able to connect to a test LDAP server (that has 10 users) from WLS and am
    able to see the users in Web interface of the Console under Security>realms>myRealm>users.
    This works as desired. No problem.
    But when I try to connect to an LDAP server that has 1900 users the console hangs
    up and eventually times out. The query strings are all fine because I verified
    them using an external LDAP browser.
    I checked in MyTestServer>Monitoring>Performance and it is using only 25% of the
    memory. So it is not a memory issue. Then I set the logging threshold to 'info'
    but there are no special messages.
    Now I am wondering where else should I look for to fix this. It works fine when
    there are small number of users. But when there are large number of users, WebLogic
    just hangs...
    Thanks,
    Dan

    WLS build from BEA comes with SP1. This is what I am using at the moment. So I
    am not sure what SP1 are you referring to!
    The SP1 for Platform is yet to be released though. But this is more of a server
    issue (I think). Also, I looked up in the 'known bugs' section. This is not listed
    in there...
    * Do you know what exactly is causing this problem?
    * Is there a work around?
    -Dan
    "Noah Campbell" <[email protected]> wrote:
    >
    This is a known issue. Supposedly a fix is scheduled for Service Pack
    1.
    "Dan Backman" <[email protected]> wrote:
    BTW, I am using WLS 8.1 (platform) server. I tried with 250 users in
    the LDAP server
    and the WL Admin console still hangs when trying to access MyTestServer>Security>Myrealm>users.
    -Dan
    "Dan Backman" <[email protected]> wrote:
    Hi,
    I am able to connect to a test LDAP server (that has 10 users) fromWLS
    and am
    able to see the users in Web interface of the Console under Security>realms>myRealm>users.
    This works as desired. No problem.
    But when I try to connect to an LDAP server that has 1900 users the
    console hangs
    up and eventually times out. The query strings are all fine becauseI
    verified
    them using an external LDAP browser.
    I checked in MyTestServer>Monitoring>Performance and it is using only
    25% of the
    memory. So it is not a memory issue. Then I set the logging threshold
    to 'info'
    but there are no special messages.
    Now I am wondering where else should I look for to fix this. It works
    fine when
    there are small number of users. But when there are large number ofusers,
    WebLogic
    just hangs...
    Thanks,
    Dan

  • Console hanging when press a button

    I just installed the trial version of weblogic 5.1 on redhat linux 7 with
    sun jdk1.3
    After making the changes described in the installation guide I can run the
    server and connect to it with the console.
    The console is able to navigate around the server and see stuff like what
    ejb's are deployed but any time I press a button that has an ellipses (eg
    "Shutdown Server..." or "New Deployment...") the console hangs.
    This does not happen when I press other buttons (eg "Disconnect" or "Garbage
    Collect").
    I could not see this problem in the newsgroup or on the web site, so if
    anybody can tell me how to solve it I would be very grateful.
    Thanks,
    Barry.

    Hi --
    Sounds like a GUI (swing?) problem of some kind. Consider using the
    Admin Servlets to see the same information. The console isn't really
    a necessary part of Administering the server.
    Also, the console is gone in 6.0... it's replaced with a web-based
    configuration tool -- much better.
    Cheers,
    -jg
    Barry Dunne wrote:
    >
    I just installed the trial version of weblogic 5.1 on redhat linux 7 with
    sun jdk1.3
    After making the changes described in the installation guide I can run the
    server and connect to it with the console.
    The console is able to navigate around the server and see stuff like what
    ejb's are deployed but any time I press a button that has an ellipses (eg
    "Shutdown Server..." or "New Deployment...") the console hangs.
    This does not happen when I press other buttons (eg "Disconnect" or "Garbage
    Collect").
    I could not see this problem in the newsgroup or on the web site, so if
    anybody can tell me how to solve it I would be very grateful.
    Thanks,
    Barry.

  • Latest iTunes Hanging when connecting iPad 2 and iPhone 4

    Hi,
    I have an iMac running OSX. I have updated both mavericks and Itunes to the lastest updates. When using itunes it will start fine. Then when connecting either ipad or iphone, itunes then hangs with the spinning circle. I have left this for well over 2 hours now. The only way out is to quit itunes. I have tried the iTunes help but with no sucess as yet.
    I have created a new user and the problem does diappear.,so its not an ipad/iphone or mac issue. I have tried removing my library and then connecting a device but iTunes does the same thing. I am guessing something within my Mac user profile is stopping it.
    Please help, its driving me mad.
    P.S I also have a mac book which is working fine.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
    SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar at the top of the screen.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    ☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Sqlplus hanging when connecting by specifying user/pwd

    Hi All,
    Oracle 11G R2 on WIndows 2008 R2
    I have cloned a server, serverA, and created a new server, lets say serverB. Two things i changed for this serverB:
    1) edited tnsnames entry so that the alias TST now points to this new serverB hostname (previously it was pointing to serverA)
    2) deleted and recreated the listener
    Now when i try to connect to my instance using sqlplus and the username/pwd, it hangs here:
    D:\ORACLE\DATABASE\ORA11G\database>sqlplus sys/blahblhablhar@tst as sysdba
    SQL*Plus: Release 11.2.0.3.0 Production on Tue May 7 15:18:36 2013
    Copyright (c) 1982, 2011, Oracle.  All rights reserved.If i try to connect using
    D:\ORACLE\DATABASE\ORA11G\database>sqlplus / as sysdba - IT WORKS.
    I tried to recreate my pwd file using orapwd and no luck.
    Any ideas as to why i cannot connect using the first method? Also, when i try to connect to this instance using SQL developer from my laptop, it also hangs when i do the 'Test' button..??
    Thanks in advance.
    Edited by: MSandico on 7-May-2013 12:43 PM
    Edited by: MSandico on 7-May-2013 12:47 PM

    Here it is:
    D:\ORACLE\DATABASE\ORA11G\database>lsnrctl status
    LSNRCTL for 64-bit Windows: Version 11.2.0.3.0 - Production on 08-MAY-2013 13:32
    :59
    Copyright (c) 1991, 2011, Oracle.  All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=SERVERA.corp.XXX.com)(PORT=1521)))
    STATUS of the LISTENER
    Alias                     LISTENER
    Version                   TNSLSNR for 64-bit Windows: Version 11.2.0.3.0 - Produ
    ction
    Start Date                07-MAY-2013 10:57:31
    Uptime                    1 days 2 hr. 35 min. 28 sec
    Trace Level               off
    Security                  ON: Local OS Authentication
    SNMP                      OFF
    Listener Parameter File   D:\Oracle\Database\ora11g\network\admin\listener.ora
    Listener Log File         D:\ORACLE\DATABASE\diag\tnslsnr\IDCORATST01\listener\a
    lert\log.xml
    Listening Endpoints Summary...
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=SERVERA.corp.XXX.com)(PO
    RT=1521)))
      (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
    Services Summary...
    Service "CLRExtProc" has 1 instance(s).
      Instance "CLRExtProc", status UNKNOWN, has 4 handler(s) for this service...
    Service "MMSPRD7XDB" has 1 instance(s).
      Instance "mmsprd7", status READY, has 1 handler(s) for this service...
    Service "mmsprd7" has 1 instance(s).
      Instance "mmsprd7", status READY, has 1 handler(s) for this service...
    The command completed successfully
    D:\ORACLE\DATABASE\ORA11G\database>lsnrctl service
    LSNRCTL for 64-bit Windows: Version 11.2.0.3.0 - Production on 08-MAY-2013 13:33
    :22
    Copyright (c) 1991, 2011, Oracle.  All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=SERVERA.corp.XXX.com)(PORT=1521)))
    Services Summary...
    Service "CLRExtProc" has 1 instance(s).
      Instance "CLRExtProc", status UNKNOWN, has 4 handler(s) for this service...
        Handler(s):
          "DEDICATED" established:0 refused:0
             LOCAL SERVER
          "DEDICATED" established:0 refused:0
             LOCAL SERVER
          "ORACLE SERVER" established:0 refused:0 current:0 max:25 state:ready
             CLRExtProc
             (ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\NTN_498_D98D5B78_8ADC.ORA))
          "ORACLE SERVER" established:0 refused:0 current:0 max:25 state:ready
             CLRExtProc
             (ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\NTN_498_D98D5B78_4773.ORA))
    Service "MMSPRD7XDB" has 1 instance(s).
      Instance "mmsprd7", status READY, has 1 handler(s) for this service...
        Handler(s):
          "D000" established:0 refused:0 current:0 max:1022 state:ready
             DISPATCHER <machine: SERVERA, pid: 2136>
             (ADDRESS=(PROTOCOL=tcp)(HOST=SERVERA.corp.XXX.com)(PORT=521
    94))
    Service "mmsprd7" has 1 instance(s).
      Instance "mmsprd7", status READY, has 1 handler(s) for this service...
        Handler(s):
          "DEDICATED" established:7 refused:0 state:ready
             LOCAL SERVER
    The command completed successfully
    D:\ORACLE\DATABASE\ORA11G\database>Anything strike y'all yet?

  • DPM Console hangs when adding servers by Modify Protection Group

    Hi Guys,
    I hope you can help
    I've created several protection groups and need to add a couple more servers to each, but I'm having issues where the DPM console hangs. This is what I'm doing:
    Under Protection:
    Right Click the Protection Group and select: Modify protection group...
    Under "Select Group Members" - expand the server and select it's volume or SQL DB, etc and click Next
    Under "Select Data Protection Method", I click Next
    Now the MMC stops working. There are no error messages, no unresponsive notifications, it just doesn't do anything.
    I can't click Back, Next, Cancel, Help or change any of the other options on this page.
    I left it once and went to bed, when I came back 12 hours later, nothing had changed.
    I have to open task manager and force close the MMC and reopen but I'm unable to add any additional servers. I can create new Protection Groups but would rather avoid this.
    For reference
    OS: Server 2012 R2 64bit
    DPM: 2012 R2 UR4
    The issue occurs using local console over RDP or via the client console on Windows 7
    Does anyone have an idea how I can get around this issue?
    Thanks
    Ryan

    After further playing - It's not isolated to adding servers. I actually can't continue past the "Select Data Protection Method" page even if I don't change anything in terms of the selection lists.
    Anyone else having issues or know what the problem is?

  • OCIStmtExecute hangs when connection is lost

    Hi,
    If the connection to the Oracle server for some reason is lost, the call to OCIStmtExecute could hang for several minutes. When OCIStmtExecute finally returns a new call to OCIStmtExecute does not hang but of course it returns with error.
    How can I prevent OCIStmtExecute from hanging several minutes first time when connection is lost?
    I'm using nonblocking mode, but it obviously doesnt prevent OCIStmtExecute from hanging the first time after connection loss.
    Can anybody help me?
    Thanks in advance!
    Br,
    Ole Hansen

    Although Bug 18336207 is still in status  "80 - Development to QA/Fix Delivered Internal" - it seems that it was fixed in the final Release 3 (v4.121.2.20141216)
    (at least I can't reproduce it anymore).
    Thanks

  • ActiveMQ-CPP client hangs when connect ActiveMQ-CPP client & OpenMQ broker

    I am trying to connect an ActiveMQ-CPP client with an Oracle OpenMQ broker via STOMP. Both manufacturers claim this will work, and I have been able to get an ActiveMQ-CPP client to connect to an ActiveMQ broker via STOMP, an OpenMQ client with an OpenMQ broker via STOMP, and an OpenMQ client with an ActiveMQ broker via STOMP without problems, but the only one missing is what I need- ActiveMQ-CPP client to connect with OpenMQ broker.
    I am using Fedora Linux and am using the provided "example" script for ActiveMQ-CPP, changing the brokerURL to be "tcp://localhost:61613?wireFormat=stomp" instead, where the OpenMQ STOMP bridge is located at localhost:61613.
    On the OpenMQ end, I receive the request to connect by the client and I start a connection:
    INFO: Create JMS connection for user admin with client id ID:csa-nexus-57767-1281630228652-1:0
    Aug 12, 2010 8:23:48 AM
    INFO: Started JMS connection 8950669406784000768[ID:csa-nexus-57767-1281630228652-1:0] for user admin
    This is where the ActiveMQ-CPP client hangs at "connection->start", or if this is removed, "connection->createSession".
    Any help would be appreciated. Thanks!

    I need to use ActiveMQ-CPP because I need a C++ messaging client which supports failover, which OpenMQ's C client does not. I thought it was unlikely that it wouldn't be able to connect as well. I can't find a good way to debug the ActiveMQ-CPP client enough to know whether the problem is on the ActiveMQ-CPP client's end or the OpenMQ broker's end.
    Here is the source code for installing ActiveMQ-CPP, that is how you install it: http://activemq.apache.org/cms/activemq-cpp-322-release.html.
    The example comes bundled with ActiveMQ-CPP installation, but I'll show you parts of the main.cpp file that does all of the work:
    class HelloWorldConsumer : public ExceptionListener,
    public MessageListener,
    public Runnable {
    private:
    this->brokerURI = brokerURI;
    virtual ~HelloWorldConsumer(){
    cleanup();
    void close() {
    this->cleanup();
    void waitUntilReady() {
    latch.await();
    virtual void run() {
    try {
    auto_ptr<ConnectionFactory> connectionFactory( ConnectionFactory::createCMSConnectionFactory( brokerURI ) );
    // Create a Connection
    connection = connectionFactory->createConnection("admin", "admin");
    connection->start();
    connection->setExceptionListener(this);
    // Create a Session
    if( this->sessionTransacted == true ) {
    session = connection->createSession( Session::SESSION_TRANSACTED );
    } else {
    session = connection->createSession( Session::AUTO_ACKNOWLEDGE );
    // Create the destination (Topic or Queue)
    if( useTopic ) {
    destination = session->createTopic( "TEST.FOO" );
    } else {
    destination = session->createQueue( "TEST.FOO" );
    // Create a MessageConsumer from the Session to the Topic or Queue
    consumer = session->createConsumer( destination );
    consumer->setMessageListener( this );
    std::cout.flush();
    std::cerr.flush();
    // Indicate we are ready for messages.
    latch.countDown();
    // Wait while asynchronous messages come in.
    doneLatch.await( waitMillis );
    } catch( CMSException& e ) {
    // Indicate we are ready for messages.
    latch.countDown();
    e.printStackTrace();
    // Called from the consumer since this class is a registered MessageListener.
    virtual void onMessage( const Message* message ){
    static int count = 0;
    try
    count++;
    const TextMessage* textMessage =
    dynamic_cast< const TextMessage* >( message );
    string text = "";
    if( textMessage != NULL ) {
    text = textMessage->getText();
    } else {
    text = "NOT A TEXTMESSAGE!";
    printf( "Message #%d Received: %s\n", count, text.c_str() );
    } catch (CMSException& e) {
    e.printStackTrace();
    // Commit all messages.
    if( this->sessionTransacted ) {
    session->commit();
    // No matter what, tag the count down latch until done.
    doneLatch.countDown();
    // If something bad happens you see it here as this class is also been
    // registered as an ExceptionListener with the connection.
    virtual void onException( const CMSException& ex AMQCPP_UNUSED) {
    printf("CMS Exception occurred. Shutting down client.\n");
    ex.printStackTrace();
    exit(1);
    int main(int argc AMQCPP_UNUSED, char* argv[] AMQCPP_UNUSED) {
    activemq::library::ActiveMQCPP::initializeLibrary();
    std::cout << "=====================================================\n";
    std::cout << "Starting the example:" << std::endl;
    std::cout << "-----------------------------------------------------\n";
    std::string brokerURI =
    "tcp://localhost:61613"
    "?wireFormat=stomp"
    // "&soConnectTimeout=5"
    // "&connection.sendTimeout=5"
    // "&connection.useAsyncSend=true"
    // "&transport.useInactivityMonitor=false"
    // "&connection.alwaysSyncSend=true"
    // "&connection.useAsyncSend=true"
    // "&transport.commandTracingEnabled=true"
    // "&transport.tcpTracingEnabled=true"
    // "&wireFormat.tightEncodingEnabled=true"
    //============================================================
    // set to true to use topics instead of queues
    // Note in the code above that this causes createTopic or
    // createQueue to be used in both consumer an producer.
    //============================================================
    bool useTopics = true;
    bool sessionTransacted = false;
    int numMessages = 2000;
    long long startTime = System::currentTimeMillis();
    HelloWorldProducer producer( brokerURI, numMessages, useTopics );
    HelloWorldConsumer consumer( brokerURI, numMessages, useTopics, sessionTransacted );
    // Start the consumer thread.
    Thread consumerThread( &consumer );
    consumerThread.start();
    // Wait for the consumer to indicate that its ready to go.
    consumer.waitUntilReady();
    // Start the producer thread.
    Thread producerThread( &producer );
    producerThread.start();
    // Wait for the threads to complete.
    producerThread.join();
    consumerThread.join();
    long long endTime = System::currentTimeMillis();
    double totalTime = (double)(endTime - startTime) / 1000.0;
    consumer.close();
    producer.close();
    std::cout << "Time to completion = " << totalTime << " seconds." << std::endl;
    std::cout << "-----------------------------------------------------\n";
    std::cout << "Finished with the example." << std::endl;
    std::cout << "=====================================================\n";
    activemq::library::ActiveMQCPP::shutdownLibrary();
    // END SNIPPET: demo The places where the code will hang upon connection are "connection->start() and connection->createSession()". Again, this happens with any ActiveMQ client, no matter the language, and via Stomp, both should be supported. But using an OpenMQ client with ActiveMQ broker works perfectly. And using this code with its own ActiveMQ broker still via Stomp works perfectly as well.
    Thanks!

  • One Report, Two Servers, Debugging

    I have a report that uses multi-select parameters.
    It is deployed on two SSRS 2008 R2 Report Servers.
    It will run on one but not other.
    Are there any kinds of SSRS 2008 R2 debugging tools to find out what is the difference between the two servers?
    It may be an ODBC driver but I am not sure.
    Thank you.

    First we need to identify what is generating the error on the one server. This error occurs when you pass too much for a given data type. For instance, on one server an int parameter value that is generated from a SQL query might result in a bigint value
    that overflows the int data type. Or a string passed to a char(10) might exceed 10 characters while it does not on the other server.
    What is the query text where these 2 parameters are used?
    If you remove these parameters from the data set filter, will the report run without the error?
    If so, what are the values for these 2 parameters? (add 2 text boxes to the report to display the parameter values using Join(Parameters!Parameter1.Value,"; "))
    Then we need to determine why it is not happening on the other.
    Why is it deployed to 2 servers? Is it connecting to different data sources?
    What is the difference between the two servers where it is deployed.
    "You will find a fortune, though it will not be the one you seek." -
    Blind Seer, O Brother Where Art Thou
    Please Mark posts as answers or helpful so that others may find the fortune they seek.

  • WebLogic 10.3.2 console hangs when attempting configuration changes

    Hi,
    I am running:
    WebLogic 10.3.2
    Windows XP x86 64bit
    JRockit JVM 1.6.0
    I have done a fresh install (twice) and whenever I start the main admin console and try to create a new server or deployment it just sits there and hangs. There are no other servers setup just the defualt AdminServer in development mode. The only other variable is that I have versions 9.2 & 10.3.0 of WL installed - in seperate home locations however so they should not conflict.
    Here's a thread dump........
    ============
    1.
    ============
    "Main Thread" waiting for lock weblogic.t3.srvr.T3Srvr@1265e12 WAITING
         java.lang.Object.wait(Native Method)
         java.lang.Object.wait(Object.java:485)
         weblogic.t3.srvr.T3Srvr.waitForDeath(T3Srvr.java:849)
         weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:465)
         weblogic.Server.main(Server.java:67)
    "(Signal Handler)" RUNNABLE
    null
    "(OC Main Thread)" RUNNABLE
    null
    "(Code Generation Thread 1)" RUNNABLE
    null
    "(Code Optimization Thread 1)" RUNNABLE
    null
    "(VM Periodic Task)" RUNNABLE
    null
    "(Attach Listener)" RUNNABLE
    null
    "Finalizer" RUNNABLE
         jrockit.memory.Finalizer.waitForFinalizees(Native Method)
         jrockit.memory.Finalizer.access$700(Finalizer.java:12)
         jrockit.memory.Finalizer$4.run(Finalizer.java:189)
         java.lang.Thread.run(Thread.java:619)
    "Reference Handler" RUNNABLE
         java.lang.ref.Reference.waitForActivatedQueue(Native Method)
         java.lang.ref.Reference.access$100(Reference.java:11)
         java.lang.ref.Reference$ReferenceHandler.run(Reference.java:82)
    "(Sensor Event Thread)" RUNNABLE
    null
    "VM JFR Buffer Thread" RUNNABLE native
    null
    "Timer-0" waiting for lock java.util.TaskQueue@12618b6 WAITING
         java.lang.Object.wait(Native Method)
         java.lang.Object.wait(Object.java:485)
         java.util.TimerThread.mainLoop(Timer.java:483)
         java.util.TimerThread.run(Timer.java:462)
    "Timer-1" waiting for lock java.util.TaskQueue@1410fe0 TIMED_WAITING
         java.lang.Object.wait(Native Method)
         java.util.TimerThread.mainLoop(Timer.java:509)
         java.util.TimerThread.run(Timer.java:462)
    "[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'" RUNNABLE
         sun.management.ThreadImpl.getThreadInfo0(Native Method)
         sun.management.ThreadImpl.getThreadInfo(ThreadImpl.java:145)
         weblogic.platform.VM15.threadDumpAsString(VM15.java:22)
         weblogic.platform.VM.threadDumpAsString(VM.java:137)
         weblogic.t3.srvr.JVMRuntime.getThreadStackDump(JVMRuntime.java:111)
         sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         java.lang.reflect.Method.invoke(Method.java:597)
         weblogic.management.jmx.modelmbean.WLSModelMBean.getAttribute(WLSModelMBean.java:525)
         com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.getAttribute(DefaultMBeanServerInterceptor.java:666)
         com.sun.jmx.mbeanserver.JmxMBeanServer.getAttribute(JmxMBeanServer.java:638)
         weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$12.run(WLSMBeanServerInterceptorBase.java:326)
         weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.getAttribute(WLSMBeanServerInterceptorBase.java:324)
         weblogic.management.mbeanservers.internal.JMXContextInterceptor.getAttribute(JMXContextInterceptor.java:163)
         weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$12.run(WLSMBeanServerInterceptorBase.java:326)
         weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.getAttribute(WLSMBeanServerInterceptorBase.java:324)
         weblogic.management.mbeanservers.internal.SecurityInterceptor.getAttribute(SecurityInterceptor.java:298)
         weblogic.management.jmx.mbeanserver.WLSMBeanServer.getAttribute(WLSMBeanServer.java:273)
         weblogic.management.mbeanservers.domainruntime.internal.ManagedMBeanServerConnection.getAttribute(ManagedMBeanServerConnection.java:304)
         weblogic.management.mbeanservers.domainruntime.internal.FederatedMBeanServerInterceptor.getAttribute(FederatedMBeanServerInterceptor.java:308)
         weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$12.run(WLSMBeanServerInterceptorBase.java:326)
         weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.getAttribute(WLSMBeanServerInterceptorBase.java:324)
         weblogic.management.mbeanservers.internal.JMXContextInterceptor.getAttribute(JMXContextInterceptor.java:163)
         weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$12.run(WLSMBeanServerInterceptorBase.java:326)
         weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.getAttribute(WLSMBeanServerInterceptorBase.java:324)
         weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$12.run(WLSMBeanServerInterceptorBase.java:326)
         weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.getAttribute(WLSMBeanServerInterceptorBase.java:324)
         weblogic.management.mbeanservers.internal.SecurityInterceptor.getAttribute(SecurityInterceptor.java:298)
         weblogic.management.jmx.mbeanserver.WLSMBeanServer.getAttribute(WLSMBeanServer.java:273)
         weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder$5$1.run(JMXConnectorSubjectForwarder.java:326)
         weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder$5.run(JMXConnectorSubjectForwarder.java:324)
         weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
         weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder.getAttribute(JMXConnectorSubjectForwarder.java:319)
         javax.management.remote.rmi.RMIConnectionImpl.doOperation(RMIConnectionImpl.java:1404)
         javax.management.remote.rmi.RMIConnectionImpl.access$200(RMIConnectionImpl.java:72)
         javax.management.remote.rmi.RMIConnectionImpl$PrivilegedOperation.run(RMIConnectionImpl.java:1265)
         javax.management.remote.rmi.RMIConnectionImpl.doPrivilegedOperation(RMIConnectionImpl.java:1367)
         javax.management.remote.rmi.RMIConnectionImpl.getAttribute(RMIConnectionImpl.java:600)
         javax.management.remote.rmi.RMIConnectionImpl_WLSkel.invoke(Unknown Source)
         weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:174)
         weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:222)
         javax.management.remote.rmi.RMIConnectionImpl_1032_WLStub.getAttribute(Unknown Source)
         javax.management.remote.rmi.RMIConnector$RemoteMBeanServerConnection.getAttribute(RMIConnector.java:878)
         javax.management.MBeanServerInvocationHandler.invoke(MBeanServerInvocationHandler.java:263)
         weblogic.management.jmx.MBeanServerInvocationHandler.doInvoke(MBeanServerInvocationHandler.java:504)
         weblogic.management.jmx.MBeanServerInvocationHandler.invoke(MBeanServerInvocationHandler.java:380)
         $Proxy73.getThreadStackDump(Unknown Source)
         com.bea.console.actions.core.server.ThreadStackDumpAction.getCollection(ThreadStackDumpAction.java:61)
         com.bea.console.actions.BaseTableAction.display(BaseTableAction.java:46)
         com.bea.console.actions.BaseDisplayAction.execute(BaseDisplayAction.java:92)
         org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
         org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.access$201(PageFlowRequestProcessor.java:97)
         org.apache.beehive.netui.pageflow.PageFlowRequestProcessor$ActionRunner.execute(PageFlowRequestProcessor.java:2044)
         org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors.wrapAction(ActionInterceptors.java:91)
         org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processActionPerform(PageFlowRequestProcessor.java:2116)
         com.bea.console.internal.ConsolePageFlowRequestProcessor.processActionPerform(ConsolePageFlowRequestProcessor.java:261)
         org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
         org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:556)
         org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:853)
         org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:631)
         org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:158)
         com.bea.console.internal.ConsoleActionServlet.process(ConsoleActionServlet.java:256)
         org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
         com.bea.console.internal.ConsoleActionServlet.doGet(ConsoleActionServlet.java:133)
         org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1199)
         com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:686)
         com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.renderInternal(ScopedContentCommonSupport.java:266)
         com.bea.portlet.adapter.scopedcontent.StrutsStubImpl.render(StrutsStubImpl.java:107)
         com.bea.netuix.servlets.controls.content.NetuiContent.preRender(NetuiContent.java:292)
         com.bea.netuix.nf.ControlLifecycle$6.visit(ControlLifecycle.java:428)
         com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:727)
         com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
         com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
         com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
         com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
         com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
         com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
         com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
         com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
         com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
         com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
         com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
         com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
         com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
         com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
         com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
         com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
         com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
         com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
         com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
         com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
         com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
         com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
         com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:146)
         com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:395)
         com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361)
         com.bea.netuix.nf.Lifecycle.runOutbound(Lifecycle.java:208)
         com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:162)
         com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:388)
         com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:258)
         com.bea.netuix.servlets.manager.UIServlet.doGet(UIServlet.java:211)
         com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:196)
         com.bea.netuix.servlets.manager.SingleFileServlet.service(SingleFileServlet.java:251)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         com.bea.console.utils.MBeanUtilsInitSingleFileServlet.service(MBeanUtilsInitSingleFileServlet.java:47)
         weblogic.servlet.AsyncInitServlet.service(AsyncInitServlet.java:130)
         weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
         weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
         weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
         weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
         weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
         weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
         weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    "weblogic.time.TimeEventGenerator" waiting for lock weblogic.time.common.internal.TimeTable@7bc04d TIMED_WAITING
         java.lang.Object.wait(Native Method)
         weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:286)
         weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.java:117)
         java.lang.Thread.run(Thread.java:619)
    "weblogic.timers.TimerThread" waiting for lock weblogic.timers.internal.TimerThread@7af929 TIMED_WAITING
         java.lang.Object.wait(Native Method)
         weblogic.timers.internal.TimerThread$Thread.run(TimerThread.java:267)
    "[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'" waiting for lock weblogic.work.ExecuteThread@141130f WAITING
         java.lang.Object.wait(Native Method)
         java.lang.Object.wait(Object.java:485)
         weblogic.work.ExecuteThread.waitForRequest(ExecuteThread.java:157)
         weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    "Thread-7" waiting for lock java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject@141149d WAITING
         sun.misc.Unsafe.park(Native Method)
         java.util.concurrent.locks.LockSupport.park(LockSupport.java:158)
         java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.await(AbstractQueuedSynchronizer.java:1925)
         java.util.concurrent.LinkedBlockingQueue.take(LinkedBlockingQueue.java:399)
         weblogic.utils.concurrent.JDK15ConcurrentBlockingQueue.take(JDK15ConcurrentBlockingQueue.java:89)
         weblogic.store.internal.PersistentStoreImpl.getOutstandingWork(PersistentStoreImpl.java:567)
         weblogic.store.internal.PersistentStoreImpl.run(PersistentStoreImpl.java:615)
         weblogic.store.internal.PersistentStoreImpl$2.run(PersistentStoreImpl.java:383)
    "ExecuteThread: '0' for queue: 'weblogic.socket.Muxer'" RUNNABLE
         weblogic.work.ExecuteThread.notifyRequest(ExecuteThread.java:145)
         weblogic.work.RequestManager.executeIt(RequestManager.java:247)
         weblogic.work.SelfTuningWorkManagerImpl.scheduleInternal(SelfTuningWorkManagerImpl.java:166)
         weblogic.work.SelfTuningWorkManagerImpl.schedule(SelfTuningWorkManagerImpl.java:149)
         weblogic.work.WorkManagerLifecycleImpl.schedule(WorkManagerLifecycleImpl.java:156)
         weblogic.servlet.internal.MuxableSocketHTTP.resolveServletContext(MuxableSocketHTTP.java:406)
         weblogic.servlet.internal.MuxableSocketHTTP.dispatch(MuxableSocketHTTP.java:347)
         weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:105)
         weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '1' for queue: 'weblogic.socket.Muxer'" RUNNABLE native
         weblogic.socket.NTSocketMuxer.getIoCompletionResult(Native Method)
         weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:81)
         weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '2' for queue: 'weblogic.socket.Muxer'" RUNNABLE native
         weblogic.socket.NTSocketMuxer.getIoCompletionResult(Native Method)
         weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:81)
         weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "VDE Transaction Processor Thread" waiting for lock [email protected] WAITING
         java.lang.Object.wait(Native Method)
         java.lang.Object.wait(Object.java:485)
         com.octetstring.vde.backend.standard.TransactionProcessor.waitChange(TransactionProcessor.java:367)
         com.octetstring.vde.backend.standard.TransactionProcessor.run(TransactionProcessor.java:212)
    "DoSManager" TIMED_WAITING
         java.lang.Thread.sleep(Native Method)
         com.octetstring.vde.DoSManager.run(DoSManager.java:433)
    "Thread-11" waiting for lock java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject@734dcd WAITING
         sun.misc.Unsafe.park(Native Method)
         java.util.concurrent.locks.LockSupport.park(LockSupport.java:158)
         java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.await(AbstractQueuedSynchronizer.java:1925)
         java.util.concurrent.LinkedBlockingQueue.take(LinkedBlockingQueue.java:399)
         weblogic.utils.concurrent.JDK15ConcurrentBlockingQueue.take(JDK15ConcurrentBlockingQueue.java:89)
         weblogic.store.internal.PersistentStoreImpl.getOutstandingWork(PersistentStoreImpl.java:567)
         weblogic.store.internal.PersistentStoreImpl.run(PersistentStoreImpl.java:615)
         weblogic.store.internal.PersistentStoreImpl$2.run(PersistentStoreImpl.java:383)
    "weblogic.GCMonitor" waiting for lock java.lang.ref.ReferenceQueue$Lock@11a9ae0 TIMED_WAITING
         java.lang.Object.wait(Native Method)
         java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:118)
         weblogic.platform.GCMonitorThread.waitForNotification(GCMonitorThread.java:88)
         weblogic.platform.GCMonitorThread.run(GCMonitorThread.java:64)
    "DynamicListenThread[Default]" RUNNABLE native
         java.net.PlainSocketImpl.socketAccept(Native Method)
         java.net.PlainSocketImpl.accept(PlainSocketImpl.java:390)
         java.net.ServerSocket.implAccept(ServerSocket.java:453)
         java.net.ServerSocket.accept(ServerSocket.java:421)
         weblogic.socket.WeblogicServerSocket.accept(WeblogicServerSocket.java:38)
         weblogic.server.channels.DynamicListenThread$SocketAccepter.accept(DynamicListenThread.java:528)
         weblogic.server.channels.DynamicListenThread$SocketAccepter.access$200(DynamicListenThread.java:420)
         weblogic.server.channels.DynamicListenThread.run(DynamicListenThread.java:171)
         java.lang.Thread.run(Thread.java:619)
    "DynamicListenThread[Default[1]]" RUNNABLE native
         java.net.PlainSocketImpl.socketAccept(Native Method)
         java.net.PlainSocketImpl.accept(PlainSocketImpl.java:390)
         java.net.ServerSocket.implAccept(ServerSocket.java:453)
         java.net.ServerSocket.accept(ServerSocket.java:421)
         weblogic.socket.WeblogicServerSocket.accept(WeblogicServerSocket.java:38)
         weblogic.server.channels.DynamicListenThread$SocketAccepter.accept(DynamicListenThread.java:528)
         weblogic.server.channels.DynamicListenThread$SocketAccepter.access$200(DynamicListenThread.java:420)
         weblogic.server.channels.DynamicListenThread.run(DynamicListenThread.java:171)
         java.lang.Thread.run(Thread.java:619)
    "[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'" waiting for lock weblogic.work.ExecuteThread@125148e WAITING
         java.lang.Object.wait(Native Method)
         java.lang.Object.wait(Object.java:485)
         weblogic.work.ExecuteThread.waitForRequest(ExecuteThread.java:157)
         weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    "[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'" waiting for lock weblogic.work.ExecuteThread@11a9d86 WAITING
         java.lang.Object.wait(Native Method)
         java.lang.Object.wait(Object.java:485)
         weblogic.work.ExecuteThread.waitForRequest(ExecuteThread.java:157)
         weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    Thanks for any help in advance...

    Hi thanks for your reply. Very strangely without making any changes I left it alone for an hour or so and it seems to be ok after that!

Maybe you are looking for

  • JTree, displaying data from a database

    Hi, im doing an application that will display the listing of courses, and allow users to book them. For the display of courses, i plan to use JTree to display them. However my problem arises from fetchin data and putting them into the tree. This file

  • Ugly, ugly, Chromium did not shutdown correctly hack.

    Chromium constantly gives errors when I launch it.  Either says it didn't shutdown correctly or that there was a problem with my user profile.  The following bash script checks to see if it is running and if it isn't it clears Chromium's cache and de

  • Can an hp laserlight cd recorder be used with a mac book ?

    I have a hp laserlight cd recorder/burner that plugs into a usb port. the software is for windows. Is it possible to use it with my macbook ?

  • Is Recovery Tool good for Nomad Jukebox Zen Xtra?

    Computer OS is XP Pro Email support was useless. They gave me three different answers!

  • Unable to save pictures.

    I try taking a picture and get this message: Ciphering material does not match this device My default save location is the media card. Solved! Go to Solution.