Weblogic console - the button "change & lock" is missing

I just installed weblogic 10.3.5 server in my PC, and found in weblogic console, on the left pane – Change center, the button “change & lock” is missing. How could I get the button back?
Thank you very much!

Click in the admin console on Preferences, User Preferences and uncheck Automatically Acquire Lock and Activate Changes.
Than the Lock&Edit button will appear.

Similar Messages

Unable to Start the Weblogic Console, "The domain edit lock error persists"

Hi, I have read a post regarding "The domain edit lock is owned by another session in exclusive mode" error in Weblogic server Using JDeveloper, I am also getting the same error when I ran the JDeveloper, But to change the settings I am Unable to open the Console for WebLogic Server Administration in My System(PC).
"http://127.0.0.1:7001/console" or "http://localhost:7001/console" both are not opening. I have not Installed Weblogic Server separately but I configured My application using JDeveloper. I am getting the above error in JDev Console. I am using the JDeveloper 11g version.
Your Help will be greatly helpful to me.
Thanks,
Srinivas Reddy.

Problem is solved in opening the WebLogic Admin Console... But When I try to deploy the application Some errors Like Validation Failed for Schemas..
this type of messages are coming in red color in admin console.
can any one help on this..?

Using internet banking the gold security lock is missing from bottom right task bar

I am disturbed that the 'safe & secure ' gold padlock symbol that usually appears when using Internet Banking is no longer down near the bottom right Task Bar area. I always log in via the 'Address Bar'. Any reason ? Many thanks.

Ideally you should focus on the new identity button that is explained in the previous posts.
However, there is an addon that adds the padlock icon to Firefox 4. https://addons.mozilla.org/en-US/firefox/addon/padlock-icon/
Because the status bar at the bottom of the window is no longer shown by default, this addon displays the padlock inside the identity button. For users who are trained to look for a padlock, this might help them to move their attention to the new identity button.

Can i make a button change anchor link when you scroll down the site?

I am trying to make a scroll site.. and i have navigation buttons on the right, a full menu, but also a "1 topic up" button and "1 topic down" button.
Is there any way that i can have those buttons change anchor link when you scroll down the site.
Example:
I am at home, then i press "1 topic down" and gets scrolled to the next topic on the website, but then i cant make the button change to link to the anchor below that, so the button becomes useless after that 1 press.
Is that in any way possible in Muse to make it change link?

Hi
You can try to create different buttons on page positions where down scrolling will be active with separate button actions. For example you click on "I topic down" , page scrolls and there is another button placed with "Next Topic down" , on click this would scroll the page more and similarly along the length of page.
Button with anchor link scrolling down the page cannot be used for different anchor links, creating different buttons with anchors is the solution.
Thanks,
Sanjit

Setting up a toggle button where the caption changes when clicked

Good day all;
I am designing a new form and I am trying to figure out how to use 1 button to either display a field or hide a field.
What I am looking for exactly is the following.
A button that will default with the caption “Hide Field X” when the form is opened (and Field X is visible). When the user clicks on this button, “Field X” is hidden and the caption on the button changes to “Display Field X”. When the user clicks on this button “Field X” is displayed and the caption on the button changes to “Hide Field X”. I guess what I am looking for is a toggle switch with a caption change depending on “Field X” Presence.
Thanks for any suggestions
Chomp

Hi Chomp,
If you have a look at the Edit button Table 5 it will show how to change the caption of the button: http://assure.ly/gk8Q7a.
Niall

Default Web Application is not visible in Weblogic Console

We are using Weblogic 5.1.0 SP7
          We moved our Application from the Implicitly Defined Default Web
          Application which is configurated by the
          weblogic properties to a Web Application. Because we don't want to
          change any URL in our Application, we
          decided to deploy it as Explicitly Defined Default Web Application.
          By this we recordniced that the weblogic.httpd.defaultWebApp property
          worked not that way descibed in the
          Weblogic Documentation. You have to write the path to the WebApp not the
          name!
          So we have the following Entry in the weblogic.properties:
          weblogic.httpd.defaultWebApp=i:/if_home2/web
          This works fine. The Server starts and serves the WebApp the way we
          expected. But wenn we start the Weblogic
          Console the WebApp ist not visible in the "myserver/HTTP/Servlet web
          applications" folder. This one is empty
          now! Previously the "General" Entry for the Implicitly Defined Default
          Web Application was shown here, which
          showed our Servlets and JSP's and their hit count and parameters.
          So there is no chance to monitor the Servlets and JSP's of the default
          Web Application.
          I tried to deploy our WebApp a secound time with
          weblogic.httpd.webApp.OurApp=i:/if_home2/web
          but this create a second independent WebApp. OurApp is shown in the
          Weblogic Console but it does not monitor
          the hits to the default WebApp. So this is not a solution!
          Any idea to make the default Web Application visible in the Weblogic
          Console?


in my development environment i checked in site collection feature, it isn't available in site collection feature but still i am getting those web parts in web part gallery while adding it on page.
Also, in Production environment, feature is available in /templates/features folder after deployment, but not available in web part gallery while adding it on page.
I tried with uploading .webpart file which is available in /templates/features production environment as i mentioned, is running for one web part. Not for second web part and giving me security error.
As, uploading .webpart file is not feasible solution, please tell me how could i do that with .wsp file?
please tell me what could be another workaround.

Default Web Application ist not visible in WebLogic Console

We are using Weblogic 5.1.0 SP7
          We moved our Application from the Implicitly Defined Default Web
          Application which is configurated by the weblogic properties to a Web
          Application. Because we don't want to change any URL in our Application,
          we decided to deploy it as Explicitly Defined Default Web Application.
          By this we recordniced that the weblogic.httpd.defaultWebApp property
          worked not that way descibed in the Weblogic Documentation. You have to
          write the path to the WebApp not the name!
          So we have the following Entry in the weblogic.properties:
          weblogic.httpd.defaultWebApp=i:/if_home2/web
          This works fine. The Server starts and serves the WebApp the way we
          expected. But wenn we start the Weblogic Console the WebApp ist not
          visible in the "myserver/HTTP/Servlet web applications" folder. This one
          is empty now! Previously the "General" Entry for the Implicitly Defined
          Default Web Application was shown here, which showed our Servlets and
          JSP's and their hit count and parameters.
          So there is no chance to monitor the Servlets and JSP's of the default
          Web Application.
          I tried to deploy our WebApp a secound time with
          weblogic.httpd.webApp.OurApp=i:/if_home2/web
          but this create a second independent WebApp. OurApp is shown in the
          Weblogic Console but it does not monitor the hits to the default WebApp.
          So this is not a solution!
          Any idea to make the default Web Application visible in the Weblogic
          Console?


Hello Nadar,
Tell me how are you starting server in the cluster, through nodemanager or commnadline.
Kuldeep

Email Submit Button - Change Text/Confirm submission

I have an Email Submit Button on my survey, which I am 'distributing'. I would like for it to do 2 things once you click on the "Email Submit Button":
1) Text of the button changes once it been clicked on in order to show that the survey was submitted. Right now, all I can figure is how to have the text change when you roll over the box or for the secnod you click on the box-- i want the caption to change once its been clicked.
2) a text box appears below that can act as a "thank you for submitting your survey...".
any help and advice is much appreciated!

Thanks for the response Paul. I feel like i'm very close, but I'm still not there... I'm not sure where to enter this javascript you sent me. The only script I know to find is the XML Source ...if that's the right place, where do I enter your code?
<field name="Button1" y="241.3mm" x="66.675mm" w="73.025mm" h="9.525mm"><
ui><
button/></
ui><
caption><
value><
exData contentType="text/html"><
body xmlns="http://www.w3.org/1999/xhtml" xmlns:xfa="http://www.xfa.org/schema/xfa-data/1.0/" xfa:APIVersion="2.5.6290.0">simply CLICK HERE to submit via e-mail</body></
exData></
value><
para vAlign="middle" hAlign="center" spaceAbove="0pt" spaceBelow="0pt" textIndent="0pt" marginLeft="0pt" marginRight="0pt"/></
caption><
border hand="right">
<?templateDesigner StyleID apbx2?>
<edge stroke="raised"/><
fill><
color value="212,208,200"/></
fill></
border><
bind match="none"/></
field></
subform>

In version 8 the "stop loading the current page" icon is missing. How do I get it back?

I just installed version 8, and even though the features page says that the "stop loading the current page" will be a part of the default navigation toolbar, that icon is not on the toolbar. How do I get it to be there

In Firefox 4 and newer versions, the Go, Stop and Reload buttons are combined in one button at the right end of the URL or Address bar. The button changes depending on the activity:
*green Go arrow when typing in the address bar
*red Stop ("X") button while page is loading
*gray Reload (circular arrow) when page is finished loading.
See image at the bottom of this reply
Separate buttons are possible:
#Open Customize Toolbar window by clicking Firefox button > Option > Toolbar Layout '''''OR''''' clicking View > Toolbars > Customize if using the Menu Bar '''''OR''''' right-click in an empty space on a toolbar and choose Customize
#While the Customize window is open, Stop and Reload buttons will show separated between the address bar and the search bar
#While the Customize window is open, drag the buttons anywhere on the Navigation toolbar
#*order Reload-Stop will combine into one button
#**leaving in this order between URL/Location/Address bar and Search bar will cause it to re-combine with the "Go" button at the right end of the URL/Location/Address bar
#**leaving in this order elsewhere, the Reload and Stop buttons will combine into one button
#*order Stop-Reload will remain separate buttons
#*or drag a "Separator" from the Customize window between Reload-Stop and they will remain separate
#click Done at bottom right of Customize window to finish
See: https://support.mozilla.com/en-US/kb/how-do-i-customize-toolbars
'''If this reply solves your problem, please click "Solved It" next to this reply when signed-in to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

Play Button Changes Color To Red, Can I Change It?

In the Sliding Planes theme, when I preview, the Play button (originally dark blue) turns red. It has to be something set in the theme since other themes have a change in color of the Play button as well (sometimes to yellow and other colors). Is this changeable? I would rather the color not change and stay dark blue. Thanks a lot!

Ok, I think you answered my question. I just want to make sure you know that it's not the highlighting persay that I'm talking about, it's just the fact that the button changes and stays to red, it's not that it only gets red when you're selecting it but that once the menu starts and the text flies in and the drop zones are in motion the top writting and everything is the color I want but the Play button turns red automatically before I select it or anything. But I think you answered my question in that the theme I selected requires the Play button to turn red automatically to distinguish it from other buttons. I wouldn't mind it turning red when I would press enter or something to play, like for a second to change color to know that I cliked it, but what bothers me is that it's red the whole time which off sets the color scheme that I'm trying to make on the menu. Thanks again

Where is the button formerly known as stop?

On previous versions of FF there was a 'Stop' button that canceled what seemed to be a transaction going nowhere. Where is that button now?

Starting in Firefox 4, the Go, Stop and Reload buttons are combined in one button at the right end of the URL or Address bar. The button changes depending on the activity:
*green Go arrow when typing in the address bar
*red Stop ("X") button while page is loading
*gray Reload (circular arrow) when page is finished loading.
Separate buttons are possible:
#Open Customize Toolbar window by clicking Firefox button > Option > Toolbar Layout '''''OR''''' clicking View > Toolbars > Customize if using the Menu Bar '''OR''' right-click in an empty space on a toolbar and choose Customize
#Stop and Reload buttons will show separated between the address bar and the search bar
#drag the buttons anywhere on the Navigation toolbar
#*order Reload-Stop will combine into one button
#*order Stop-Reload will remain separate buttons
#*or drag a "Separator" from the Customize window between Reload-Stop and they will remain separate
#click Done at bottom right of Customize window to finish
See: https://support.mozilla.com/en-US/kb/how-do-i-customize-toolbars
'''If this reply solves your problem, please click "Solved It" next to this reply when signed-in to the forum.'''
Not related to your question, but...
You need to update some plug-ins:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]

How to retain the button over state while scrolling over a Pop-up Menu

Are there updated instruction for Fireworks 8?
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15926&sliceId=1

I just wouldn't use those menus at all - there are much
better ways. Have
you considered them?
Check the uberlink and MacFly tutorials at PVII -
http://www.projectseven.com/
and the Navbar tutorial/articles at Thierry's place
http://tjkdesign.com/articles/dropdown/
Or this one (more recent article):
http://tjkdesign.com/articles/Pure_CSS_Dropdown_Menus.asp
Or to get it done fast, go here -
http://www.projectseven.com/tutorials/navigation/auto_hide/index.htm
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"turpya" <[email protected]> wrote in
message
news:f2ilfs$7gr$[email protected]..
> Hi,
>
> I am trying to work out how to retain button over state
while scrolling
> over a
> pop-up menu. By default the button changes back to mouse
out state, when
> scrolling over menu items for that button.
>
> I have tried to follow the advice in the below technote
(see link below),
> but
> it seems the instructions are incorrect.
>
> I am using Fireworks 8 - it appears the instructions are
for a prior
> version.
> I cannot find function fwLoadMenus() mentioned in Step 3
(number 6.).
>
> Has anyone accomplished this in Fireworks 8, that could
provide me with
> instructions?
>
> Thanks in advance,
>
> turpya.
>
>
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_15926
>

Button "change" disappers in BSP degree audit

Hi,
I find the following strange behaviour in BSP degree audit, when I want to change an existing but not released degree audit run.
1. When I select the student in the BSP application and list the audit runs for a study program, the application shows correctly five buttons: "create", "change", "display", "delete" and "cancel". Four of them are greyed correctly, as no audit run is selected yet.
When I now select an audit run, the buttons "change", "display" and "delete" disappear, so I can not change or delete the audit run anymore. To me, this behaviour seems not to be correct.
2. When I create a new audit run in this situation, no "save"-button appears. This also seems not to be correct.
Can anybody reproduce this behaviour as well? Is this a bug?
Thank you
Andreas Born

Unfortunately this comes not out-of-the-box. Remember you are in a web browser and not in SAPGUI. If you need it you can do one of two things:
1. develop such a tool by yourself
2. check out the possibilities WebDynpro for ABAP offers you (available as of SAP NetWeaver 7.0).
Regards,
Volker

Highlight the button when the slideshow switches slides

Hi All..
i have the slideshow that works perfectly thanks to help from this forum.. the 3 externally loaded SWFs rotate with fade in/outf effect on their own as well as per button click. What I would like to add to it is having the the buttons change appearance (Tint or anything) - just to show which slide the user is currently seeing. I'm very new to AS and I would really appreciate is someone would just point me in a direction of where I should place that function. Thanks so much ahead of time - here's my code:
// Attach Music
var req:URLRequest = new URLRequest("squeeak3.mp3");
var sound:Sound = new Sound();
var controller:SoundChannel = new SoundChannel();
var b:Boolean;
if(!b) {
 b=true;
function soundLoaded(event:Event):void
 controller = sound.play(0,1000);
 play_btn.addEventListener(MouseEvent.CLICK, playSound);
 stop_btn.addEventListener(MouseEvent.CLICK, stopSound);
function playSound(event:MouseEvent):void
 SoundMixer.stopAll();
 controller = sound.play(0,1000);
function stopSound(event:MouseEvent):void
 controller.stop();
 SoundMixer.stopAll();
sound.addEventListener(Event.COMPLETE, soundLoaded);
sound.load(req);
//Import classes for easier use
import fl.transitions.Tween;
import fl.transitions.TweenEvent;
import fl.transitions.easing.*;
//Timer
var tl:MovieClip = this;
var slideDuration:uint = 8000;// or use whatever
var slideTimer:Timer=new Timer(slideDuration,0);
slideTimer.addEventListener(TimerEvent.TIMER,autoAdvanceF);
var previousBtn:SimpleButton;
var btnA:Array = [one_btn,two_btn,three_btn];
function autoAdvanceF(e:TimerEvent):void {
 nextButtonF(previousBtn).dispatchEvent(new MouseEvent(MouseEvent.CLICK));
function nextButtonF(btn:SimpleButton):SimpleButton {// use class type of your buttons
 for (var i:uint=0; i<btnA.length; i++) {
 if (btnA[i]==btn) {
 return btnA[(i+1)%btnA.length];
 return null;
//Load external SWF into main
var Xpos:Number = 0;
var Ypos:Number = 0;
var loaderA:Array = [];
//Btns universal function (whenver any button is clicked, the loader will be removed
function btnClick(event:MouseEvent):void {
 slideTimer.reset();
 slideTimer.start();
 previousBtn = SimpleButton(event.currentTarget);
 var loader:Loader = new Loader();
 loaderA.push(loader);
 var newSWFRequest:URLRequest = new URLRequest("swfs/" + event.target.name + ".swf");
 loader.contentLoaderInfo.addEventListener(Event.COMPLETE,loadComplete );
 loader.load(newSWFRequest);
 loader.x = Xpos;
 loader.y = Ypos;
 loader.alpha = 0;
 addChildAt(loader,0);
var tween:Tween;
function loadComplete(e:Event):void {
 for (var i:int=loaderA.length-2; i>=0; i--) {
 tl["tween_"+i] = new Tween(loaderA[i], "alpha", None.easeIn, loaderA[i].alpha, 0, 1, true);
 tl["tween_"+i].addEventListener(TweenEvent.MOTION_FINISH,onMotionFinish);
 e.target.loader.contentLoaderInfo.removeEventListener(Event.COMPLETE, loadComplete);
 tween = new Tween(e.target.loader, "alpha", None.easeIn, 0, 1, 1, true);
function onMotionFinish(e:TweenEvent) {
 Loader(e.target.obj).unload();
 removeChild(e.target.obj);
 loaderA.splice(loaderAIndex(Loader(e.target.obj)),1);
 e.target.obj = null;
function loaderAIndex(loader:Loader):int{
 for(var i:int=0;i<loaderA.length;i++){
 if(loaderA[i]==loader){
 return i;
 return -1;
/// Button Listerners
one_btn.addEventListener(MouseEvent.CLICK,btnClick);
two_btn.addEventListener(MouseEvent.CLICK,btnClick);
three_btn.addEventListener(MouseEvent.CLICK,btnClick);
btnA[0].dispatchEvent(new MouseEvent(MouseEvent.CLICK));

use:
var lastClickedButton:MovieClip (or SimpleButton or Sprite);
// Attach Music
var req:URLRequest = new URLRequest("squeeak3.mp3");
var sound:Sound = new Sound();
var controller:SoundChannel = new SoundChannel();
var b:Boolean;
if(!b) {
 b=true;
function soundLoaded(event:Event):void
 controller = sound.play(0,1000);
 play_btn.addEventListener(MouseEvent.CLICK, playSound);
 stop_btn.addEventListener(MouseEvent.CLICK, stopSound);
function playSound(event:MouseEvent):void
 SoundMixer.stopAll();
 controller = sound.play(0,1000);
function stopSound(event:MouseEvent):void
 controller.stop();
 SoundMixer.stopAll();
sound.addEventListener(Event.COMPLETE, soundLoaded);
sound.load(req);
//Import classes for easier use
import fl.transitions.Tween;
import fl.transitions.TweenEvent;
import fl.transitions.easing.*;
//Timer
var tl:MovieClip = this;
var slideDuration:uint = 8000;// or use whatever
var slideTimer:Timer=new Timer(slideDuration,0);
slideTimer.addEventListener(TimerEvent.TIMER,autoAdvanceF);
var previousBtn:SimpleButton;
var btnA:Array = [one_btn,two_btn,three_btn];
function autoAdvanceF(e:TimerEvent):void {
 nextButtonF(previousBtn).dispatchEvent(new MouseEvent(MouseEvent.CLICK));
function nextButtonF(btn:SimpleButton):SimpleButton {// use class type of your buttons
 for (var i:uint=0; i<btnA.length; i++) {
 if (btnA[i]==btn) {
 return btnA[(i+1)%btnA.length];
 return null;
//Load external SWF into main
var Xpos:Number = 0;
var Ypos:Number = 0;
var loaderA:Array = [];
//Btns universal function (whenver any button is clicked, the loader will be removed
function btnClick(event:MouseEvent):void {
 if(lastClickedBtn!=null){
// lastClickedBtn - undo highlight
lastClickedBtn=event.currentTarget;
// event.currentTarget = do hightlight
 slideTimer.reset();
 slideTimer.start();
 previousBtn = SimpleButton(event.currentTarget);
 var loader:Loader = new Loader();
 loaderA.push(loader);
 var newSWFRequest:URLRequest = new URLRequest("swfs/" + event.target.name + ".swf");
 loader.contentLoaderInfo.addEventListener(Event.COMPLETE,loadComplete );
 loader.load(newSWFRequest);
 loader.x = Xpos;
 loader.y = Ypos;
 loader.alpha = 0;
 addChildAt(loader,0);
var tween:Tween;
function loadComplete(e:Event):void {
 for (var i:int=loaderA.length-2; i>=0; i--) {
 tl["tween_"+i] = new Tween(loaderA[i], "alpha", None.easeIn, loaderA[i].alpha, 0, 1, true);
 tl["tween_"+i].addEventListener(TweenEvent.MOTION_FINISH,onMotionFini sh);
 e.target.loader.contentLoaderInfo.removeEventListener(Event.COMPLETE, loadComplete);
 tween = new Tween(e.target.loader, "alpha", None.easeIn, 0, 1, 1, true);
function onMotionFinish(e:TweenEvent) {
 Loader(e.target.obj).unload();
 removeChild(e.target.obj);
 loaderA.splice(loaderAIndex(Loader(e.target.obj)),1);
 e.target.obj = null;
function loaderAIndex(loader:Loader):int{
 for(var i:int=0;i<loaderA.length;i++){
 if(loaderA[i]==loader){
 return i;
 return -1;
/// Button Listerners
one_btn.addEventListener(MouseEvent.CLICK,btnClick);
two_btn.addEventListener(MouseEvent.CLICK,btnClick);
three_btn.addEventListener(MouseEvent.CLICK,btnClick);
btnA[0].dispatchEvent(new MouseEvent(MouseEvent.CLICK));

Button changes style when connected to Application Manager

I've connected the standard axButtons to the application manager in a custom OI built in CSharp using Visual Studio 2008. When I run the OI, the buttons change from the standard style (rounded edges, etc.) to what looks like a classic style (squared edges, no color gradient, etc.). At first I thought this might be a limitation of CSharp, but when I ran the executable CSharp UI (shipped with Teststand), the buttons look correct. Is there a reference that I've not added or something? I've followed (pretty much copied) the code found in the full-featured CSharp UI, leaving out functions that I didn't need.
Below is the only real code involving the two buttons. It's pretty simple so I imagined it's a project property that I've setup incorrectly. I've also included the namespaces I included.
Thanks for any help
using NationalInstruments.TestStand.Interop.API;using NationalInstruments.TestStand.Interop.UI;using NationalInstruments.TestStand.Interop.UI.Support;using NationalInstruments.TestStand.Utility;
// Connect Sequence Controls this.axSequenceFileViewMgr1.ConnectCommand(this.axEntryPoint1Button, CommandKinds.CommandKind_ExecutionEntryPoints_Set, 0, CommandConnectionOptions.CommandConnection_NoOptions); this.axSequenceFileViewMgr1.ConnectCommand(this.axEntryPoint2Button, CommandKinds.CommandKind_ExecutionEntryPoints_Set, 1, CommandConnectionOptions.CommandConnection_NoOptions);
Solved!
Go to Solution.

Scott, once again, thanks for your help. I've tried several things relating to this manifest file, all to no avail. First, I tried pasting the lines you mention into the <program>.vshost.exe.manifest file (the vshost file was the only manifest file that I could find, is this the correct one?)--no change. In the "Application" tab on the project properties, I can select create w/o manifest or embed manifest. I tried both, but from this point the original manifest file was deleted during the build process and did not show up anymore.
The project includes the windows common buttons as well as the teststand .NET controls. I assume this would accomplish the lines you mentioned, but I am a .NET newbie so I could be wrong there.
I've attached a 2008 C# Express project which includes no code, only a windows common button and a teststand button on a form. When I run this program, I see the same behavior. Can you take a look at this, and let me know if you see the same behavior?
Thanks,
Shawn
Attachments:
TS_Control_Test.zip ‏62 KB

Weblogic console - the button "change & lock" is missing

Similar Messages

Maybe you are looking for