Weblogic doesn't start up

Hi,
I use weblogic on my MacBook for few months now and I don't know why since this morning weblogic refuses to start up.
Apparently it fails to connect to this address: fd00:6587:52d7:1d76:62c5:47ff:fe97:19f6
I noticed this IPv6 address is the one defined as utun0 when I do a ifconfig. I don't know why weblogic uses this interface. As you can see in the log file, weblogic creates defaults channels for each interface (Channel Default[1], Channel Default[2], Channel Default[3] and so on...)
Is anyone could help me as I am completely stuck at the moment. Please find below the ifconfig result and the weblogic log file. Feel free to ask me anything if you need more information (log file, configuration, etc...)
Thanks you very much
ifconfig result:
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
options=3<RXCSUM,TXCSUM>
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en1: flags=8823<UP,BROADCAST,SMART,SIMPLEX,MULTICAST> mtu 1500
ether 60:c5:47:97:19:f6
media: autoselect (<unknown type>)
status: inactive
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=2b<RXCSUM,TXCSUM,VLAN_HWTAGGING,TSO4>
ether 3c:07:54:24:2c:a6
inet6 fe80::3e07:54ff:fe24:2ca6%en0 prefixlen 64 scopeid 0x5
inet 192.168.0.68 netmask 0xffffff00 broadcast 192.168.0.255
media: autoselect (1000baseT <full-duplex>)
status: active
p2p0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 2304
ether 02:c5:47:97:19:f6
media: autoselect
status: inactive
fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 4078
lladdr a4:b1:97:ff:fe:53:4a:40
media: autoselect <full-duplex>
status: inactive
vnic0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=3<RXCSUM,TXCSUM>
ether 00:1c:42:00:00:08
inet 10.211.55.2 netmask 0xffffff00 broadcast 10.211.55.255
media: autoselect
status: active
vnic1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=3<RXCSUM,TXCSUM>
ether 00:1c:42:00:00:09
inet 10.37.129.2 netmask 0xffffff00 broadcast 10.37.129.255
media: autoselect
status: active
utun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1380
inet6 fe80::62c5:47ff:fe97:19f6%utun0 prefixlen 64 scopeid 0xa
inet6 fd00:6587:52d7:1d76:62c5:47ff:fe97:19f6 prefixlen 64
Log file:
####<16-Jul-2013 15:21:38 o'clock BST> <Info> <Security> <Manuels-MacBook-Pro.local> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1373984498875> <BEA-000000> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
####<16-Jul-2013 15:21:38 o'clock BST> <Info> <Security> <Manuels-MacBook-Pro.local> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1373984498967> <BEA-000000> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
####<16-Jul-2013 15:21:39 o'clock BST> <Info> <WebLogicServer> <Manuels-MacBook-Pro.local> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1373984499268> <BEA-000000> <Starting WebLogic Server with Java HotSpot(TM) 64-Bit Server VM Version 20.51-b01-457 from Apple Inc.>
####<16-Jul-2013 15:21:40 o'clock BST> <Info> <Management> <Manuels-MacBook-Pro.local> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1373984500038> <BEA-000000> <Version: WebLogic Server 10.3.6.0 Tue Nov 15 08:52:36 PST 2011 1441050 >
####<16-Jul-2013 15:21:42 o'clock BST> <Notice> <WebLogicServer> <Manuels-MacBook-Pro.local> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1373984502100> <BEA-000000> <Server state changed to STARTING>
####<16-Jul-2013 15:21:42 o'clock BST> <Info> <WorkManager> <Manuels-MacBook-Pro.local> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1373984502110> <BEA-000000> <Initializing self-tuning thread pool>
####<16-Jul-2013 15:21:42 o'clock BST> <Info> <WebLogicServer> <Manuels-MacBook-Pro.local> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1373984502179> <BEA-000000> <WebLogic Server "Fiserv-SEM" version:
WebLogic Server 10.3.6.0 Tue Nov 15 08:52:36 PST 2011 1441050 Copyright (c) 1995, 2011, Oracle and/or its affiliates. All rights reserved.>
####<16-Jul-2013 15:21:42 o'clock BST> <Notice> <Log Management> <Manuels-MacBook-Pro.local> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1373984502245> <BEA-170019> <The server log file /Users/TheEwook/Dev/Tools/weblogic_domain/servers/Fiserv-SEM/logs/Fiserv-SEM.log is opened. All server side log events will be written to this file.>
####<16-Jul-2013 15:21:42 o'clock BST> <Info> <Log Management> <Manuels-MacBook-Pro.local> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1373984502249> <BEA-170023> <The Server Logging is initialized with Java Logging API implementation.>
####<16-Jul-2013 15:21:42 o'clock BST> <Info> <Diagnostics> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984502299> <BEA-320001> <The ServerDebug service initialized successfully.>
####<16-Jul-2013 15:21:42 o'clock BST> <Info> <Server> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984502358> <BEA-002622> <The protocol "t3" is now configured.>
####<16-Jul-2013 15:21:42 o'clock BST> <Info> <Server> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984502358> <BEA-002622> <The protocol "t3s" is now configured.>
####<16-Jul-2013 15:21:42 o'clock BST> <Info> <Server> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984502358> <BEA-002622> <The protocol "http" is now configured.>
####<16-Jul-2013 15:21:42 o'clock BST> <Info> <Server> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984502358> <BEA-002622> <The protocol "https" is now configured.>
####<16-Jul-2013 15:21:42 o'clock BST> <Info> <Server> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984502359> <BEA-002622> <The protocol "iiop" is now configured.>
####<16-Jul-2013 15:21:42 o'clock BST> <Info> <Server> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984502360> <BEA-002622> <The protocol "iiops" is now configured.>
####<16-Jul-2013 15:21:42 o'clock BST> <Info> <Server> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984502360> <BEA-002622> <The protocol "ldap" is now configured.>
####<16-Jul-2013 15:21:42 o'clock BST> <Info> <Server> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984502361> <BEA-002622> <The protocol "ldaps" is now configured.>
####<16-Jul-2013 15:21:42 o'clock BST> <Info> <Server> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984502365> <BEA-002622> <The protocol "cluster" is now configured.>
####<16-Jul-2013 15:21:42 o'clock BST> <Info> <Server> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984502365> <BEA-002622> <The protocol "clusters" is now configured.>
####<16-Jul-2013 15:21:42 o'clock BST> <Info> <Server> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984502370> <BEA-002622> <The protocol "snmp" is now configured.>
####<16-Jul-2013 15:21:42 o'clock BST> <Info> <Server> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984502370> <BEA-002622> <The protocol "admin" is now configured.>
####<16-Jul-2013 15:21:42 o'clock BST> <Info> <Server> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984502370> <BEA-002624> <The administration protocol is "t3s" and is now configured.>
####<16-Jul-2013 15:21:42 o'clock BST> <Info> <RJVM> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984502382> <BEA-000570> <Network Configuration for Channel "Fiserv-SEM"
Listen Address :7011
Public Address N/A
Http Enabled true
Tunneling Enabled false
Outbound Enabled false
Admin Traffic Enabled true>
####<16-Jul-2013 15:21:42 o'clock BST> <Info> <Server> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984502574> <BEA-002609> <Channel Service initialized.>
####<16-Jul-2013 15:21:42 o'clock BST> <Info> <Socket> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984502587> <BEA-000415> <System has file descriptor limits of - soft: 10,240, hard: -1>
####<16-Jul-2013 15:21:42 o'clock BST> <Info> <Socket> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984502588> <BEA-000416> <Using effective file descriptor limit of: 10,240 open sockets/files.>
####<16-Jul-2013 15:21:42 o'clock BST> <Info> <Socket> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984502588> <BEA-000406> <PosixSocketMuxer was built on May 13 2009 15:20:23>
####<16-Jul-2013 15:21:42 o'clock BST> <Info> <Socket> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984502613> <BEA-000436> <Allocating 4 reader threads.>
####<16-Jul-2013 15:21:42 o'clock BST> <Info> <Socket> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984502614> <BEA-000446> <Native IO Enabled.>
####<16-Jul-2013 15:21:42 o'clock BST> <Info> <IIOP> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984502745> <BEA-002014> <IIOP subsystem enabled.>
####<16-Jul-2013 15:21:43 o'clock BST> <Info> <Security> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984503713> <BEA-000000> <Starting OpenJPA 1.1.1-SNAPSHOT>
####<16-Jul-2013 15:21:43 o'clock BST> <Info> <Security> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984503992> <BEA-000000> <StoreServiceImpl.initJDO - StoreService is initialized with Id = ldap_N3oRW40rtyCl24gxSmEX77bo1x4=>
####<16-Jul-2013 15:21:44 o'clock BST> <Info> <Security> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984504262> <BEA-090516> <The Authorizer provider has preexisting LDAP data.>
####<16-Jul-2013 15:21:44 o'clock BST> <Info> <Security> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984504626> <BEA-090516> <The CredentialMapper provider has preexisting LDAP data.>
####<16-Jul-2013 15:21:44 o'clock BST> <Info> <Security> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984504637> <BEA-090516> <The RoleMapper provider has preexisting LDAP data.>
####<16-Jul-2013 15:21:44 o'clock BST> <Info> <Security> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984504769> <BEA-090093> <No pre-WLS 8.1 Keystore providers are configured for server Fiserv-SEM for security realm myrealm.>
####<16-Jul-2013 15:21:44 o'clock BST> <Notice> <Security> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984504769> <BEA-090082> <Security initializing using security realm myrealm.>
####<16-Jul-2013 15:21:44 o'clock BST> <Info> <Server> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984504992> <BEA-002622> <The protocol "[snmp, https, t3, cluster-broadcast-secure, ldaps, cluster-broadcast, ldap, http, iiop, admin, t3s, iiops]" is now configured.>
####<16-Jul-2013 15:21:44 o'clock BST> <Info> <XML> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984504998> <BEA-130036> <Initializing XMLRegistry.>
####<16-Jul-2013 15:21:45 o'clock BST> <Info> <messaging.interception> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984505005> <BEA-400000> <Initializing message interception service>
####<16-Jul-2013 15:24:17 o'clock BST> <Info> <Store> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984657137> <BEA-280008> <Opening the persistent file store "_WLS_Fiserv-SEM" for recovery: directory=/Users/TheEwook/Dev/Tools/weblogic_domain/servers/Fiserv-SEM/data/store/default requestedWritePolicy="Direct-Write" fileLockingEnabled=true driver="NIO".>
####<16-Jul-2013 15:24:17 o'clock BST> <Warning> <Store> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984657153> <BEA-280109> <Unable to load the native wlfileio library for the persistent file store "_WLS_Fiserv-SEM". The store will use buffered I/O. The store is still operating in a transactionally safe synchronous mode. See store open log messages for the requested and final write policies.>
####<16-Jul-2013 15:24:17 o'clock BST> <Info> <Store> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984657186> <BEA-280009> <The persistent file store "_WLS_Fiserv-SEM" (051f9e80-0950-4979-bb41-623f18426caa) has been opened: blockSize=512 actualWritePolicy="Direct-Write(single-handle-buffered)" explicitIOEnforced=false records=11.>
####<16-Jul-2013 15:24:17 o'clock BST> <Info> <JDBC> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984657321> <BEA-001135> <Initializing the JDBC service.>
####<16-Jul-2013 15:24:17 o'clock BST> <Info> <JDBC> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984657337> <BEA-001137> <Initialization complete.>
####<16-Jul-2013 15:24:17 o'clock BST> <Info> <JDBC> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984657337> <BEA-001138> <Resuming the JDBC service.>
####<16-Jul-2013 15:24:17 o'clock BST> <Info> <JDBC> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984657337> <BEA-001140> <Resume complete.>
####<16-Jul-2013 15:24:17 o'clock BST> <Info> <Connector> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984657376> <BEA-190000> <Initializing J2EE Connector Service......>
####<16-Jul-2013 15:24:17 o'clock BST> <Info> <Connector> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984657379> <BEA-190001> <J2EE Connector Service initialized successfully>
####<16-Jul-2013 15:24:17 o'clock BST> <Info> <JMS> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984657505> <BEA-040305> <JMS service is initialized and in standby mode.>
####<16-Jul-2013 15:24:17 o'clock BST> <Info> <JMS> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984657539> <BEA-040090> <Deployed 8 default connection factories.>
####<16-Jul-2013 15:24:17 o'clock BST> <Info> <JMS> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984657543> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory2" with its JNDI name "weblogic.jms.XAConnectionFactory2" is started.>
####<16-Jul-2013 15:24:17 o'clock BST> <Info> <JMS> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984657544> <BEA-040407> <Default connection factory "MessageDrivenBeanConnectionFactory" with its JNDI name "weblogic.jms.MessageDrivenBeanConnectionFactory" is started.>
####<16-Jul-2013 15:24:17 o'clock BST> <Info> <JMS> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984657544> <BEA-040407> <Default connection factory "DefaultConnectionFactory" with its JNDI name "weblogic.jms.ConnectionFactory" is started.>
####<16-Jul-2013 15:24:17 o'clock BST> <Info> <JMS> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984657544> <BEA-040407> <Default connection factory "TopicConnectionFactory" with its JNDI name "javax.jms.TopicConnectionFactory" is started.>
####<16-Jul-2013 15:24:17 o'clock BST> <Info> <JMS> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984657544> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory" with its JNDI name "weblogic.jms.XAConnectionFactory" is started.>
####<16-Jul-2013 15:24:17 o'clock BST> <Info> <JMS> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984657544> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory0" with its JNDI name "weblogic.jms.XAConnectionFactory0" is started.>
####<16-Jul-2013 15:24:17 o'clock BST> <Info> <JMS> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984657544> <BEA-040407> <Default connection factory "QueueConnectionFactory" with its JNDI name "javax.jms.QueueConnectionFactory" is started.>
####<16-Jul-2013 15:24:17 o'clock BST> <Info> <JMS> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984657544> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory1" with its JNDI name "weblogic.jms.XAConnectionFactory1" is started.>
####<16-Jul-2013 15:24:17 o'clock BST> <Info> <JMS> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984657546> <BEA-040306> <JMS service is active now.>
####<16-Jul-2013 15:24:17 o'clock BST> <Info> <HTTP> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984657588> <BEA-101128> <Initializing HTTP services.>
####<16-Jul-2013 15:24:17 o'clock BST> <Info> <HTTP> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984657612> <BEA-101135> <Fiserv-SEM is the default Web server.>
####<16-Jul-2013 15:24:17 o'clock BST> <Info> <HTTP> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984657612> <BEA-101052> <[HttpServer (defaultWebserver) name: Fiserv-SEM] Initialized>
####<16-Jul-2013 15:24:17 o'clock BST> <Info> <HTTP> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984657616> <BEA-101129> <Initializing the Web application container.>
####<16-Jul-2013 15:24:17 o'clock BST> <Info> <WTC> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984657660> <BEA-180046> <INFO: Logging service enabled.>
####<16-Jul-2013 15:24:17 o'clock BST> <Info> <WTC> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984657662> <BEA-180046> <INFO: TC Configuration Helper instantiated!>
####<16-Jul-2013 15:24:17 o'clock BST> <Info> <WTC> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984657663> <BEA-180046> <INFO: TC Task Manager instantiated!>
####<16-Jul-2013 15:24:17 o'clock BST> <Info> <WTC> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984657665> <BEA-180046> <INFO: TC security service instantiated!>
####<16-Jul-2013 15:24:17 o'clock BST> <Info> <WTC> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984657667> <BEA-180046> <INFO: TC Outbound routing service instantiated!>
####<16-Jul-2013 15:24:17 o'clock BST> <Info> <WTC> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984657668> <BEA-180046> <INFO: TC Transaction service instantiated!>
####<16-Jul-2013 15:24:17 o'clock BST> <Info> <WebService> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984657679> <BEA-220031> <The server does not support reliable SOAP messaging.>
####<16-Jul-2013 15:24:17 o'clock BST> <Info> <WebService> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984657679> <BEA-220027> <Web Service reliable agents are started on the server.>
####<16-Jul-2013 15:24:17 o'clock BST> <Info> <JMX> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984657848> <BEA-149512> <JMX Connector Server started at service:jmx:iiop://192.168.0.68:7011/jndi/weblogic.management.mbeanservers.runtime .>
####<16-Jul-2013 15:24:17 o'clock BST> <Info> <Management> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984657868> <BEA-141278> <Java entropy configuration is: System property "java.security.egd= file:/dev/./urandom"; JRE's java.security file property "securerandom.source= file:/dev/./urandom"; Blocking Config= false; JDK version= 1.6.0_51; Operating System= Mac OS X.>
####<16-Jul-2013 15:24:17 o'clock BST> <Info> <Management> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984657869> <BEA-141280> <Detected NON-BLOCKING java entropy configuration. This setting will provide the best performance on machines with few sources of entropy, but is less secure than a blocking entropy configuration.>
####<16-Jul-2013 15:24:17 o'clock BST> <Info> <Management> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984657869> <BEA-141187> <Java system properties are defined as follows:
awt.nativeDoubleBuffering = true
awt.toolkit = apple.awt.CToolkit
file.encoding = MacRoman
file.encoding.pkg = sun.io
file.separator = /
ftp.nonProxyHosts = local|*.local|169.254/16|*.169.254/16
gopherProxySet = false
http.nonProxyHosts = local|*.local|169.254/16|*.169.254/16
java.awt.graphicsenv = apple.awt.CGraphicsEnvironment
java.awt.printerjob = apple.awt.CPrinterJob
java.class.path = /System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/tools.jar:/Users/TheEwook/Dev/Tools/weblogic11g/wlserver/server/lib/weblogic_sp.jar:/Users/TheEwook/Dev/Tools/weblogic11g/wlserver/server/lib/weblogic.jar:/Users/TheEwook/Dev/Tools/weblogic11g/modules/features/weblogic.server.modules_10.3.6.0.jar:/Users/TheEwook/Dev/Tools/weblogic11g/wlserver/server/lib/webservices.jar:/Users/TheEwook/Dev/Tools/weblogic11g/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/Users/TheEwook/Dev/Tools/weblogic11g/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/Users/TheEwook/Dev/Tools/weblogic11g/wlserver/common/derby/lib/derbyclient.jar:/Users/TheEwook/Dev/Tools/weblogic11g/wlserver/server/lib/xqrl.jar
java.class.version = 50.0
java.endorsed.dirs = /System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/endorsed
java.ext.dirs = /Library/Java/Extensions:/System/Library/Java/Extensions:/System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/ext
java.home = /System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home
java.io.tmpdir = /var/folders/hw/hsfwq09x7lqcp19y_28s214w0000gn/T/
java.library.path = :/Users/TheEwook/Dev/Tools/weblogic11g/wlserver/server/native/macosx:.:/Library/Java/Extensions:/System/Library/Java/Extensions:/usr/lib/java
java.naming.factory.initial = weblogic.jndi.WLInitialContextFactory
java.naming.factory.url.pkgs = weblogic.jndi.factories:weblogic.corba.j2ee.naming.url:weblogic.jndi.factories:weblogic.corba.j2ee.naming.url
java.protocol.handler.pkgs = weblogic.net
java.runtime.name = Java(TM) SE Runtime Environment
java.runtime.version = 1.6.0_51-b11-457-11M4509
java.security.egd = file:/dev/./urandom
java.security.policy = /Users/TheEwook/Dev/Tools/weblogic11g/wlserver/server/lib/weblogic.policy
java.specification.name = Java Platform API Specification
java.specification.vendor = Sun Microsystems Inc.
java.specification.version = 1.6
java.vendor = Apple Inc.
java.vendor.url = http://www.apple.com/
java.vendor.url.bug = http://bugreport.apple.com/
java.version = 1.6.0_51
java.vm.info = mixed mode
java.vm.name = Java HotSpot(TM) 64-Bit Server VM
java.vm.specification.name = Java Virtual Machine Specification
java.vm.specification.vendor = Sun Microsystems Inc.
java.vm.specification.version = 1.0
java.vm.vendor = Apple Inc.
java.vm.version = 20.51-b01-457
javax.management.builder.initial = weblogic.management.jmx.mbeanserver.WLSMBeanServerBuilder
javax.rmi.CORBA.PortableRemoteObjectClass = weblogic.iiop.PortableRemoteObjectDelegateImpl
javax.rmi.CORBA.UtilClass = weblogic.iiop.UtilDelegateImpl
javax.xml.rpc.ServiceFactory = weblogic.webservice.core.rpc.ServiceFactoryImpl
javax.xml.soap.MessageFactory = weblogic.webservice.core.soap.MessageFactoryImpl
log4j.configuration = file:/Users/TheEwook/Dev/STPConfig/log4j.properties
mrj.build = 11M4509
mrj.version = 1070.1.6.0_51-457
org.omg.CORBA.ORBClass = weblogic.corba.orb.ORB
org.omg.CORBA.ORBSingletonClass = weblogic.corba.orb.ORB
org.xml.sax.driver = weblogic.xml.jaxp.RegistryXMLReader
org.xml.sax.parser = weblogic.xml.jaxp.RegistryParser
os.arch = x86_64
os.name = Mac OS X
os.version = 10.7.5
path.separator = :
platform.home = /Users/TheEwook/Dev/Tools/weblogic11g/wlserver
socksNonProxyHosts = local|*.local|169.254/16|*.169.254/16
sun.arch.data.model = 64
sun.boot.class.path = /System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/endorsed/javax-xml-bind.jar:/System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/endorsed/javax-xml-ws.jar:/System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/endorsed/jsr250-api.jar:/System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jsfd.jar:/System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/classes.jar:/System/Library/Frameworks/JavaVM.framework/Frameworks/JavaRuntimeSupport.framework/Resources/Java/JavaRuntimeSupport.jar:/System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/ui.jar:/System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/laf.jar:/System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/sunrsasign.jar:/System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jsse.jar:/System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jce.jar:/System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/charsets.jar
sun.boot.library.path = /System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Libraries
sun.cpu.endian = little
sun.io.unicode.encoding = UnicodeLittle
sun.java.command = weblogic.Server
sun.java.launcher = SUN_STANDARD
sun.jnu.encoding = MacRoman
sun.management.compiler = HotSpot 64-Bit Tiered Compilers
sun.os.patch.level = unknown
user.country = GB
user.dir = /Users/TheEwook/Dev/Tools/weblogic_domain
user.home = /Users/TheEwook
user.language = en
user.name = TheEwook
user.timezone = Europe/London
vde.home = /Users/TheEwook/Dev/Tools/weblogic_domain/servers/Fiserv-SEM/data/ldap
weblogic.Name = Fiserv-SEM
weblogic.classloader.preprocessor = weblogic.diagnostics.instrumentation.DiagnosticClassPreProcessor
weblogic.home = /Users/TheEwook/Dev/Tools/weblogic11g/wlserver/server
weblogic.management.discover = false
weblogic.management.server = t3://127.0.0.1:7001
weblogic.security.SSL.trustedCAKeyStore = /Users/TheEwook/Dev/Tools/weblogic11g/wlserver/server/lib/cacerts
wls.home = /Users/TheEwook/Dev/Tools/weblogic11g/wlserver/server
wlw.iterativeDev = false
wlw.logErrorsToConsole = false
wlw.testConsole = false
>
####<16-Jul-2013 15:28:06 o'clock BST> <Notice> <WebLogicServer> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <main> <<WLS Kernel>> <> <> <1373984886159> <BEA-000365> <Server state changed to STANDBY>
####<16-Jul-2013 15:28:06 o'clock BST> <Notice> <WebLogicServer> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <main> <<WLS Kernel>> <> <> <1373984886159> <BEA-000365> <Server state changed to STARTING>
####<16-Jul-2013 15:28:06 o'clock BST> <Info> <SAFService> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984886177> <BEA-281003> <SAF Service has been initialized.>
####<16-Jul-2013 15:28:06 o'clock BST> <Info> <SAFService> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984886186> <BEA-281002> <SAF Service has been started.>
####<16-Jul-2013 15:28:06 o'clock BST> <Info> <WseeCore> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984886190> <BEA-220502> <The Wsee Service is starting>
####<16-Jul-2013 15:28:06 o'clock BST> <Info> <Deployer> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984886206> <BEA-149209> <Resuming.>
####<16-Jul-2013 15:28:06 o'clock BST> <Info> <JDBC> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984886239> <BEA-001177> <Creating data source connection pool named JDBC STP, URL = jdbc:oracle:thin:@192.168.0.15:1521:xe, Properties = user=STP_STORAGE;.>
####<16-Jul-2013 15:28:06 o'clock BST> <Info> <Common> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984886253> <BEA-000626> <Free resources in pool "JDBC STP" will be tested every "120" seconds.>
####<16-Jul-2013 15:28:07 o'clock BST> <Info> <JDBC> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984887366> <BEA-001516> <Data source connection pool "JDBC STP" connected to Database: "Oracle", Version: "Oracle Database 11g Express Edition Release 11.2.0.2.0 - 64bit Production".>
####<16-Jul-2013 15:28:07 o'clock BST> <Info> <JDBC> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984887366> <BEA-001517> <Data source connection pool "JDBC STP" using Driver: "Oracle JDBC driver", Version: "11.2.0.3.0".>
####<16-Jul-2013 15:28:07 o'clock BST> <Info> <Common> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984887901> <BEA-000628> <Created "10" resources for pool "JDBC STP", out of which "10" are available and "0" are unavailable.>
####<16-Jul-2013 15:28:07 o'clock BST> <Info> <JDBC> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984887903> <BEA-001124> <Created Connection Pool named JDBC STP.>
####<16-Jul-2013 15:28:07 o'clock BST> <Info> <JDBC> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984887916> <BEA-001174> <Creating data source named JDBC STP, JNDI Name = jdbc/STPStoreDataSource.>
####<16-Jul-2013 15:28:07 o'clock BST> <Info> <JDBC> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984887964> <BEA-001512> <Data source JDBC STP has been successfully created.>
####<16-Jul-2013 15:29:23 o'clock BST> <Error> <Deployer> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984963524> <BEA-149205> <Failed to initialize the application 'aconite-stp' due to error weblogic.management.DeploymentException: Exception occured while downloading files.
weblogic.management.DeploymentException: Exception occured while downloading files
at weblogic.deploy.internal.targetserver.datamanagement.AppDataUpdate.doDownload(AppDataUpdate.java:43)
at weblogic.deploy.internal.targetserver.datamanagement.DataUpdate.download(DataUpdate.java:56)
at weblogic.deploy.internal.targetserver.datamanagement.Data.prepareDataUpdate(Data.java:97)
at weblogic.deploy.internal.targetserver.BasicDeployment.prepareDataUpdate(BasicDeployment.java:686)
at weblogic.deploy.internal.targetserver.BasicDeployment.stageFilesForStatic(BasicDeployment.java:729)
at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:104)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: java.net.ConnectException: Tried all: '1' addresses, but could not connect over HTTP to server: '[fd00:6587:52d7:1d76:62c5:47ff:fe97:19f6]', port: '7001'
at weblogic.net.http.HttpClient.openServer(HttpClient.java:333)
at weblogic.net.http.HttpClient.openServer(HttpClient.java:425)
at weblogic.net.http.HttpClient.New(HttpClient.java:252)
at weblogic.net.http.HttpURLConnection.connect(HttpURLConnection.java:213)
at weblogic.deploy.service.datatransferhandlers.HttpDataTransferHandler.getDataAsStream(HttpDataTransferHandler.java:75)
at weblogic.deploy.service.datatransferhandlers.DataHandlerManager$RemoteDataTransferHandler.getDataAsStream(DataHandlerManager.java:153)
at weblogic.deploy.internal.targetserver.datamanagement.AppDataUpdate.doDownload(AppDataUpdate.java:39)
at weblogic.deploy.internal.targetserver.datamanagement.DataUpdate.download(DataUpdate.java:56)
at weblogic.deploy.internal.targetserver.datamanagement.Data.prepareDataUpdate(Data.java:97)
at weblogic.deploy.internal.targetserver.BasicDeployment.prepareDataUpdate(BasicDeployment.java:686)
at weblogic.deploy.internal.targetserver.BasicDeployment.stageFilesForStatic(BasicDeployment.java:729)
at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:104)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
>
####<16-Jul-2013 15:29:23 o'clock BST> <Info> <WebLogicServer> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984963528> <BEA-000256> <Invoking weblogic.transaction.internal.StartupClass.main(null)>
####<16-Jul-2013 15:29:23 o'clock BST> <Info> <Diagnostics> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984963538> <BEA-320000> <The Diagnostics subsystem is initializing on Server Fiserv-SEM.>
####<16-Jul-2013 15:29:23 o'clock BST> <Info> <Store> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984963541> <BEA-280008> <Opening the persistent file store "WLS_DIAGNOSTICS" for recovery: directory=/Users/TheEwook/Dev/Tools/weblogic_domain/servers/Fiserv-SEM/data/store/diagnostics requestedWritePolicy="Disabled" fileLockingEnabled=true driver="NIO".>
####<16-Jul-2013 15:29:23 o'clock BST> <Info> <Store> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984963566> <BEA-280009> <The persistent file store "WLS_DIAGNOSTICS" (2e05de73-f3ac-4b6f-9d3e-29414eb88462) has been opened: blockSize=512 actualWritePolicy="Disabled(single-handle-non-direct)" explicitIOEnforced=false records=21.>
####<16-Jul-2013 15:29:23 o'clock BST> <Info> <Diagnostics> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984963642> <BEA-320077> <Initialized the Diagnostic Accessor Service.>
####<16-Jul-2013 15:29:27 o'clock BST> <Info> <J2EE> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373984967535> <BEA-160151> <Registered library Extension-Name: bea_wls_async_response (JAR).>
####<16-Jul-2013 15:29:27 o'clock BST> <Info> <WebService> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1373984967869> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceHttps for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<16-Jul-2013 15:29:28 o'clock BST> <Info> <WebService> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1373984968076> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceJms for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<16-Jul-2013 15:29:28 o'clock BST> <Info> <WebService> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1373984968087> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseService for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<16-Jul-2013 15:29:28 o'clock BST> <Info> <WebService> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1373984968098> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12Jms for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<16-Jul-2013 15:29:28 o'clock BST> <Info> <WebService> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1373984968118> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12 for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<16-Jul-2013 15:29:28 o'clock BST> <Info> <WebService> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1373984968128> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12Https for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<16-Jul-2013 15:30:23 o'clock BST> <Info> <Health> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <weblogic.GCMonitor> <<anonymous>> <> <> <1373985023664> <BEA-310002> <96% of the total memory in the server is free>
####<16-Jul-2013 15:31:56 o'clock BST> <Notice> <WebLogicServer> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <main> <<WLS Kernel>> <> <> <1373985116922> <BEA-000365> <Server state changed to ADMIN>
####<16-Jul-2013 15:32:01 o'clock BST> <Warning> <Log Management> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373985121922> <BEA-170011> <The LogBroadcaster on this server failed to broadcast log messages to the admin server. The Admin server may not be running. Message broadcasts to the admin server will be disabled.>
####<16-Jul-2013 15:34:29 o'clock BST> <Notice> <WebLogicServer> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <main> <<WLS Kernel>> <> <> <1373985269305> <BEA-000365> <Server state changed to RESUMING>
####<16-Jul-2013 15:34:29 o'clock BST> <Info> <Server> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373985269360> <BEA-002619> <Not all the ListenPort(s) started properly.>
####<16-Jul-2013 15:34:29 o'clock BST> <Error> <Server> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <DynamicListenThread[Default[3]]> <<WLS Kernel>> <> <> <1373985269360> <BEA-002606> <Unable to create a server socket for listening on channel "Default[3]". The address fe80:0:0:0:0:0:0:1%0 might be incorrect or another process is using port 7011: java.net.BindException: Can't assign requested address.>
####<16-Jul-2013 15:34:29 o'clock BST> <Error> <Server> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <DynamicListenThread[Default[4]]> <<WLS Kernel>> <> <> <1373985269360> <BEA-002606> <Unable to create a server socket for listening on channel "Default[4]". The address fe80:0:0:0:3e07:54ff:fe24:2ca6%0 might be incorrect or another process is using port 7011: java.net.BindException: Can't assign requested address.>
####<16-Jul-2013 15:34:29 o'clock BST> <Info> <Server> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373985269362> <BEA-002610> <Dynamic Listener Service initialized.>
####<16-Jul-2013 15:34:29 o'clock BST> <Notice> <Server> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373985269364> <BEA-002613> <Channel "Default[1]" is now listening on 10.211.55.2:7011 for protocols iiop, t3, ldap, snmp, http.>
####<16-Jul-2013 15:34:29 o'clock BST> <Notice> <Server> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373985269364> <BEA-002613> <Channel "Default" is now listening on 192.168.0.68:7011 for protocols iiop, t3, ldap, snmp, http.>
####<16-Jul-2013 15:34:29 o'clock BST> <Notice> <Server> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373985269365> <BEA-002613> <Channel "Default[2]" is now listening on 10.37.129.2:7011 for protocols iiop, t3, ldap, snmp, http.>
####<16-Jul-2013 15:34:29 o'clock BST> <Notice> <Server> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373985269365> <BEA-002613> <Channel "Default[5]" is now listening on 127.0.0.1:7011 for protocols iiop, t3, ldap, snmp, http.>
####<16-Jul-2013 15:34:29 o'clock BST> <Notice> <Server> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373985269365> <BEA-002613> <Channel "Default[6]" is now listening on 0:0:0:0:0:0:0:1:7011 for protocols iiop, t3, ldap, snmp, http.>
####<16-Jul-2013 15:34:29 o'clock BST> <Notice> <WebLogicServer> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373985269365> <BEA-000357> <Started WebLogic Independent Managed Server "Fiserv-SEM" for domain "mydomain" running in Development Mode>
####<16-Jul-2013 15:39:32 o'clock BST> <Warning> <JMX> <Manuels-MacBook-Pro.local> <Fiserv-SEM> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1373985572630> <BEA-149509> <Unable to establish JMX Connectivity with the Adminstration Server myserver at service:jmx:t3://[fd00:6587:52d7:1d76:62c5:47ff:fe97:19f6]:7001/jndi/weblogic.management.mbeanservers.domainruntime.
java.io.IOException
at weblogic.management.remote.common.ClientProviderBase.makeConnection(ClientProviderBase.java:196)
at weblogic.management.remote.common.ClientProviderBase.newJMXConnector(ClientProviderBase.java:84)
at javax.management.remote.JMXConnectorFactory.newJMXConnector(JMXConnectorFactory.java:339)
at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:248)
at weblogic.management.mbeanservers.runtime.internal.RegisterWithDomainRuntimeService.getDomainMBeanServerConnection(RegisterWithDomainRuntimeService.java:222)
at weblogic.management.mbeanservers.runtime.internal.RegisterWithDomainRuntimeService.notifyDomainRuntime(RegisterWithDomainRuntimeService.java:137)
at weblogic.management.mbeanservers.runtime.internal.RegisterWithDomainRuntimeService.start(RegisterWithDomainRuntimeService.java:91)
at weblogic.management.mbeanservers.runtime.internal.RegisterWithDomainRuntimeServiceLate.start(RegisterWithDomainRuntimeServiceLate.java:17)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: javax.naming.CommunicationException [Root exception is java.net.ConnectException: t3://[fd00:6587:52d7:1d76:62c5:47ff:fe97:19f6]:7001: Destination unreachable; nested exception is:
java.n

Similar Messages

[OIM] OIM on WebLogic doesn't start..

I have deployed OIM on WLS 10.3. It was working until today, I go into WLS concole and start the application. I get this error:
[HTTP:101216]Servlet: "XellerateBootstrapServlet" failed to preload on startup in Web application: "/xlWebApp". java.lang.NoClassDefFoundError: Could not initialize class com.thortech.xl.cache.CacheUtil at com.thortech.xl.webclient.util.tcMessageResourcesUtil.getCustomDefaultResources(Unknown Source)
I copied xlCache.jar to bea/user_projects/domains/oim_domain/lib but results are the same. Someone can help me with this?
Thanks!

Hi Derek,
thank you for the help. I started from xlStartWLS.sh but I get the same. Exceptions thrown appears to be relative to the same:
<Feb 1, 2011 6:35:00 PM ARST> <Error> <HTTP> <BEA-101165> <Could not load user defined filter in web.xml: com.thortech.xl.webclient.security.SecurityFilter.
java.util.MissingResourceException: Can't find bundle for base name xlDefaultAdmin, locale en_US
<Feb 1, 2011 6:35:02 PM ARST> <Error> <HTTP> <BEA-101216> <Servlet: "XellerateBootstrapServlet" failed to preload on startup in Web application: "/xlWebApp".
java.lang.NullPointerException
at com.thortech.xl.util.LocalizationUtil.getLocaleListFromResourceBundle(Unknown Source)
<Feb 1, 2011 6:35:02 PM ARST> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'Xellerate'.
weblogic.application.ModuleException: [HTTP:101216]Servlet: "XellerateBootstrapServlet" failed to preload on startup in Web application: "/xlWebApp".
java.lang.NullPointerException
at com.thortech.xl.util.LocalizationUtil.getLocaleListFromResourceBundle(Unknown Source)
java.lang.NullPointerException
at com.thortech.xl.util.LocalizationUtil.getLocaleListFromResourceBundle(Unknown Source)

Jdeveloper doesn't start after Weblogic upgrade.

I had Jdeveloper Studio 11.1.1.3 and Weblogic 10.3.3 and everything was working fine. I upgraded WLS to 10.3.4. Now, Jdeveloper doesn't start. jdeveloper.exe doesn't give any error. But nothing happens. We can see the process in Windows Task Manager. Running D:\WLS\Middleware\jdeveloper\jdev\bin\jdev.exe gives following error:
java.lang.NoClassDefFoundError: oracle/javatools/util/Maps$AbstractCacheMap$ReferenceType
at oracle.ide.model.NodeFactory.<clinit>(NodeFactory.java:74)
at oracle.ide.model.Node.setURL(Node.java:562)
at oracle.ide.model.Node.<init>(Node.java:419)
at oracle.ide.model.DataContainer.<init>(DataContainer.java:59)
at oracle.ide.model.IdeSystem.<init>(IdeSystem.java:67)
at oracle.ide.IdeCore.getSystem(IdeCore.java:590)
at oracle.ide.IdeCore.getPreferences(IdeCore.java:600)
at oracle.ide.IdeCore.startupImpl(IdeCore.java:1515)
at oracle.ide.Ide.startup(Ide.java:703)
at oracle.ideimpl.DefaultIdeStarter.startIde(DefaultIdeStarter.java:35)
at oracle.ideimpl.Main.start(Main.java:184)
at oracle.ideimpl.Main.main(Main.java:146)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.ide.boot.PCLMain.callMain(PCLMain.java:62)
at oracle.ide.boot.PCLMain.main(PCLMain.java:54)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.classloader.util.MainClass.invoke(MainClass.java:128)
at oracle.ide.boot.IdeLauncher.bootClassLoadersAndMain(IdeLauncher.java:189)
at oracle.ide.boot.IdeLauncher.launchImpl(IdeLauncher.java:89)
at oracle.ide.boot.IdeLauncher.launch(IdeLauncher.java:65)
at oracle.ide.boot.IdeLauncher.main(IdeLauncher.java:54)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccesorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.ide.boot.Launcher.invokeMain(Launcher.java:713)
at oracle.ide.boot.Launcher.launchImpl(Launcher.java:115)
at oracle.ide.boot.Launcher.launch(Launcher.java:68)
at oracle.ide.boot.Launcher.main(Launcher.java:57)
Caused by: oracle.classloader.util.AnnotatedClassNotFoundException:
Missing class: oracle.javatools.util.Maps$AbstractCacheMap$ReferenceType
Dependent class: oracle.ide.model.NodeFactory
Loader: ide-global:11.1.1.0.0
Code-Source: /D:/WLS/Middleware/jdeveloper/ide/extensions/oracle.ide.jar
Configuration: boot classpath entry in oracle.ide.boot.PCLMain.BOOT_ENTRIES
This load was initiated at ide-global:11.1.1.0.0 using the loadClass() method.
The missing class is not available from any code-source or loader in the system.
at oracle.classloader.PolicyClassLoader.handleClassNotFound(PolicyClassLoader.java:2190)
at oracle.classloader.PolicyClassLoader.internalLoadClass(PolicyClassLoader.java:1733)
at oracle.classloader.PolicyClassLoader.access$000(PolicyClassLoader.java:143)
at oracle.classloader.PolicyClassLoader$LoadClassAction.run(PolicyClassLoader.java:331)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1692)
at oracle.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1674)
... 35 more
IDE boot startup failed.
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.classloader.util.MainClass.invoke(MainClass.java:128)
at oracle.ide.boot.IdeLauncher.bootClassLoadersAndMain(IdeLauncher.java:189)
at oracle.ide.boot.IdeLauncher.launchImpl(IdeLauncher.java:89)
at oracle.ide.boot.IdeLauncher.launch(IdeLauncher.java:65)
at oracle.ide.boot.IdeLauncher.main(IdeLauncher.java:54)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.ide.boot.Launcher.invokeMain(Launcher.java:713)
at oracle.ide.boot.Launcher.launchImpl(Launcher.java:115)
at oracle.ide.boot.Launcher.launch(Launcher.java:68)
at oracle.ide.boot.Launcher.main(Launcher.java:57)
Caused by: java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.ide.boot.PCLMain.callMain(PCLMain.java:62)
at oracle.ide.boot.PCLMain.main(PCLMain.java:54)
... 17 more
Caused by: oracle.ide.ExitNotAllowedException
at oracle.ide.IdeCore$1.checkExit(IdeCore.java:241)
at java.lang.Runtime.exit(Runtime.java:88)
at java.lang.System.exit(System.java:904)
at oracle.ideimpl.Main.start(Main.java:199)
at oracle.ideimpl.Main.main(Main.java:146)
... 23 more
Boot startup failed.
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.ide.boot.Launcher.invokeMain(Launcher.java:713)
at oracle.ide.boot.Launcher.launchImpl(Launcher.java:115)
at oracle.ide.boot.Launcher.launch(Launcher.java:68)
at oracle.ide.boot.Launcher.main(Launcher.java:57)
Caused by: oracle.ide.ExitNotAllowedException
at oracle.ide.IdeCore$1.checkExit(IdeCore.java:241)
at java.lang.Runtime.exit(Runtime.java:88)
at java.lang.System.exit(System.java:904)
at oracle.ide.boot.IdeLauncher.launch(IdeLauncher.java:71)
at oracle.ide.boot.IdeLauncher.main(IdeLauncher.java:54)
... 8 more
Didn't get much info on googling. Any help is appreciated.
Thanks,
Vikas

Vikas,
When using JDeveloper, the integrated WLS and ADF version are tied to the JDeveloper version - you cannot upgrade individual bits and bobs like that. There is no problem, by the way, having multiple versions of JDeveloper installed at the same time. I currently have 11.1.1.3 and 11.1.1.4 installed (different directories, of course) with no issues. In fact, I used to have many, many more releases installed, but I decided to clean up ;)
John

Help: Pointbase db doesn't start when launching SP4 portal

Hi,
I downloaded WL platform SP4 today and installed (before the installation I uninstalled SP2)in my laptop. When I launch the examples portal, the pointbase db doesn't start. I tried both SP2 and SP3 in my laptop and both worked. The error messages below are directly copied from the console. My understanding is the portal server startup will automatically start pointbase db (I didn't do any configuration yet). Anybody know the problem and solution?
My laptop config:
Win XP, SP2, 1.6 GHz, 1GB memory
I am the admin user.
Thanks a lot!!
Error messages from the launching console:
<Jul 6, 2005 6:00:54 PM PDT> <Warning> <JDBC> <BEA-001129> <Received exception w
hile creating connection for pool "cgPool": SQL-server rejected establishment of
SQL-connection. Pointbase Server may not be running on localhost at port 9093.>
<Jul 6, 2005 6:01:28 PM PDT> <Warning> <JDBC> <BEA-001129> <Received exception w
hile creating connection for pool "portalPool": SQL-server rejected establishmen
t of SQL-connection. Pointbase Server may not be running on localhost at port 90
93.>
<Jul 6, 2005 6:01:34 PM PDT> <Alert> <JMS> <BEA-040052> <JMSServer "cgJMSServer"
store failed to open java.io.IOException: JMS JDBC store, connection pool = <cg
JMSPool-nonXA>, prefix = <weblogic>: connection pool does not exist.
java.io.IOException: JMS JDBC store, connection pool = <cgJMSPool-nonXA>, prefix
= <weblogic>: connection pool does not exist
at weblogic.jms.store.JDBCIOStream.throwIOException(JDBCIOStream.java:48
8)
at weblogic.jms.store.JDBCIOStream.checkPool(JDBCIOStream.java:1599)
at weblogic.jms.store.JDBCIOStream.open(JDBCIOStream.java:548)
at weblogic.jms.store.JMSStore.open(JMSStore.java:224)
at weblogic.jms.backend.BEStore.open(BEStore.java:262)
at weblogic.jms.backend.BEStore.start(BEStore.java:151)
at weblogic.jms.backend.BackEnd.openStores(BackEnd.java:1171)
at weblogic.jms.backend.BackEnd.resume(BackEnd.java:1290)
at weblogic.jms.JMSService.addJMSServer(JMSService.java:2260)
at weblogic.jms.JMSService.addDeployment(JMSService.java:2031)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(Depl
oymentTarget.java:337)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(Dep
loymentTarget.java:597)
at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeploy
ments(DeploymentTarget.java:575)
at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(
DeploymentTarget.java:241)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMB
eanImpl.java:754)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl
.java:733)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(Configurat
ionMBeanImpl.java:509)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
60)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
28)
at weblogic.management.internal.RemoteMBeanServerImpl.private_invoke(Rem
oteMBeanServerImpl.java:988)
at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBean
ServerImpl.java:946)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:954)
at weblogic.management.internal.MBeanProxy.invokeForCachingStub(MBeanPro
xy.java:481)
at weblogic.management.configuration.ServerMBean_Stub.updateDeployments(
ServerMBean_Stub.java:7691)
at weblogic.management.deploy.slave.SlaveDeployer.updateServerDeployment
s(SlaveDeployer.java:1304)
at weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.j
ava:347)
at weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resum
e(DeploymentManagerServerLifeCycleImpl.java:229)
at weblogic.t3.srvr.SubsystemManager.resume(SubsystemManager.java:131)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:966)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:361)
at weblogic.Server.main(Server.java:32)
>

The exception doesn't tell me much more than the DB connection / pool couldn't connect to the db.
Sometimes solving these types of problems where it should work, this works everywhere else, so what could be wrong here... Let me suggest that you install a new domain using a new root directory. IE c:\bea814 and not reuse c:\bea.
I'm guessing that an essential script or property file was not overwritten by the 814 install.
JBTW, 814 pointbase is a new version and is run on a new port from prior 8.x versions, the new port is 9093, where prior versions was 9092.
A diag. is after you start via, startWebLogic.cmd, to open a DOS window and run this command:
netstat -an
Look for a LISTEN on port 9093
This would confirm that 814's pointbase is started and there's a configuration issue with the connection pools.
Good luck, curt

My application doesn't start when I run the domain as windows service

I am using weblogic 10.3.2 and i created a domain called rec_domain and i have AdminServer
also i deployed application called myApplication to the rec_domain
then i created windows service to run the server as a windows service
The Script for Setting Up a Server as a Windows Service:
echo off
SETLOCAL
set DOMAIN_NAME=rec_domain
set USERDOMAIN_HOME=C:\Oracle\Middleware\user_projects\domains\rec_domain
set SERVER_NAME=AdminServer
set WLS_USER=usernmae
set WLS_PW=password
set PRODUCTION_MODE=true
set JAVA_VM=-jrockit
set JAVA_VENDOR=BEA
set JAVA_HOME=C:\Oracle\Middleware\jrockit_160_05
set MEM_ARGS=-Xms40m -Xmx250m
call "C:\Oracle\Middleware\wlserver_10.3\server\bin\installSvc.cmd"
ENDLOCAL
the service was created successfully and when i restart the computer it runs the adminserver successfully
but it doesn't start myApplication_
does anyone know where is the problem?
Edited by: Wael Ibrahim on 28/12/2009 05:48 ص

Hi Wael,
Can you please specify, What do u mean by Application Doesn't start? Is it Moving to PREPARED State Rather than ACTIVE state? Or the Application Health is not OK? Are you seeing any Warning or Error Message while starting the Server related to Deployment?
As the Production Mode is On...So I just wanted to confirm that By Mistake have u used the AutoDeploy feature to deploy Applications...Because the AutoDeploy Feature Doesn't Work in Production_Mode=true.
After Configuring the Windows Service Have you tried to Deploy the Application Freshly? Was it Successful?
Thanks
Jay SenSharma
http://jaysensharma.wordpress.com (WebLogic Wonders Are Here)
Edited by: Jay SenSharma on Dec 29, 2009 9:11 AM

Integrated wls doesn't start

Hi,
I'm using JDev 11.1.1.3.
I was working normally but suddenly the integrated wls doesn't start anymore.
When I start the server, the log stops here
<Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
Although the log says "RUNNING", the server is not running. If I test, through the server properties, all tests fail, except the HTTP.
I tried to delete the cache folder and re-install the middleware... the problem remains.
Thanks.

Hi,
bellow follows the entire log.
I can't launch the console... the log shows this message "<Logger><error> ServletContainerAdapter manager not initialized correctly."
*** Using port 7101 ***
D:\JDevCache\system11.1.1.3.37.56.60\DefaultDomain\bin\startWebLogic.cmd
[waiting for the server to complete its initialization...]
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\ext\jdbc\oracle\11g\ojdbc6dms.jar;C:\Oracle\MIDDLE~1\patch_wls1033\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.3.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar;.;C:\Program Files\Java\jre6\lib\ext\QTJava.zip
PATH=C:\Oracle\MIDDLE~1\patch_wls1033\profiles\default\native;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;C:\Oracle\MIDDLE~1\JDK160~1\jre\bin;C:\Oracle\MIDDLE~1\JDK160~1\bin;C:\oraclexe\app\oracle\product\10.2.0\server\bin;D:\ORACLE\PRODUCT\10.2.0\CLIENT_3\BIN;D:\ORACLE\PRODUCT\10.2.0\CLIENT_2;C:\Windows\SYSTEM32;C:\Windows;C:\Windows\SYSTEM32\WBEM;C:\Windows\SYSTEM32\WINDOWSPOWERSHELL\V1.0\;C:\PROGRAM FILES\TORTOISESVN\BIN;C:\Oracle\Middleware\jdeveloper\jdev\bin;C:\Oracle\Middleware\jdeveloper\ant\bin;C:\Oracle\Middleware\jdk160_14_R27.6.5-32\bin;C:\Program Files\QuickTime\QTSystem\;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_18"
Java(TM) SE Runtime Environment (build 1.6.0_18-b07)
Java HotSpot(TM) Client VM (build 16.0-b13, mixed mode)
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Djavax.net.ssl.trustStore=C:\Oracle\Middleware3\wlserver_10.3\server\lib\DemoTrust.jks -Dhttp.proxyHost=proxy.link.pt -Dhttp.proxyPort=3128 "-Dhttp.nonProxyHosts=*.msdev.pt|*.linkcom.pt|*sgps*|*sonae*|*mch*|172.20.*.*|*.nvsd.local|192.168.*.*|194.117.36.*|*.aitec.pt|*.link.pt|localhost|localhost.localdomain|127.0.0.1|::1|pwpmedeiros.aitec.pt|pwpmedeiros" -Dhttps.proxyHost=proxy.link.pt -Dhttps.proxyPort=3128 "-Dhttps.nonProxyHosts=*.msdev.pt|*.linkcom.pt|*sgps*|*sonae*|*mch*|172.20.*.*|*.nvsd.local|192.168.*.*|194.117.36.*|*.aitec.pt|*.link.pt|localhost|localhost.localdomain|127.0.0.1|::1|pwpmedeiros.aitec.pt|pwpmedeiros" -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Djps.app.credential.overwrite.allowed=true -Ddomain.home=D:\JDEVCA~1\SYSTEM~1.60\DEFAUL~1 -Dcommon.components.home=C:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Djrockit.optfile=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.domain.config.dir=D:\JDEVCA~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1 -Doracle.server.config.dir=D:\JDEVCA~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.security.jps.config=D:\JDEVCA~1\SYSTEM~1.60\DEFAUL~1\config\fmwconfig\jps-config.xml -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Digf.arisidbeans.carmlloc=D:\JDEVCA~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=D:\JDEVCA~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\arisidprovider -Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=D:\JDEVCA~1\SYSTEM~1.60\DEFAUL~1\oracle\store\gmds -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1033\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath weblogic.Server
<30/Ago/2011 18H01m BST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 16.0-b13 from Sun Microsystems Inc.>
<30/Ago/2011 18H01m BST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.3.0 Fri Apr 9 00:05:28 PDT 2010 1321401 >
<30/Ago/2011 18H01m BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<30/Ago/2011 18H01m BST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<30/Ago/2011 18H01m BST> <Notice> <LoggingService> <BEA-320400> <The log file D:\JDevCache\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<30/Ago/2011 18H01m BST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to D:\JDevCache\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00004. Log messages will continue to be logged in D:\JDevCache\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log.>
<30/Ago/2011 18H01m BST> <Notice> <Log Management> <BEA-170019> <The server log file D:\JDevCache\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.>
<30/Ago/2011 18H01m BST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<30/Ago/2011 18H01m BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<30/Ago/2011 18H01m BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<30/Ago/2011 18H01m BST> <Notice> <LoggingService> <BEA-320400> <The log file D:\JDevCache\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<30/Ago/2011 18H01m BST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to D:\JDevCache\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log00004. Log messages will continue to be logged in D:\JDevCache\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log.>
<30/Ago/2011 18H01m BST> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<30/Ago/2011 18H01m BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<30/Ago/2011 18H01m BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default[13]" is now listening on 0:0:0:0:0:0:0:1:7101 for protocols iiop, t3, ldap, snmp, http.>
<30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default[12]" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default[6]" is now listening on fe80:0:0:0:289b:22c3:bcf6:2bce:7101 for protocols iiop, t3, ldap, snmp, http.>
<30/Ago/2011 18H01m BST> <Warning> <Server> <BEA-002611> <Hostname "pwpmedeiros.aitec.pt", maps to multiple IP addresses: 169.254.251.192, 192.168.59.64, 192.168.181.1, 192.168.159.1, fe80:0:0:0:8935:43d7:b990:fbc0%17, fe80:0:0:0:289b:22c3:bcf6:2bce%18, fe80:0:0:0:e437:fbfb:c9ee:9352%19>
<30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on 192.168.59.64:7101 for protocols iiop, t3, ldap, snmp, http.>
<30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default[10]" is now listening on fe80:0:0:0:0:100:7f:fffe:7101 for protocols iiop, t3, ldap, snmp, http.>
<30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 192.168.159.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 192.168.181.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default[9]" is now listening on fe80:0:0:0:0:5efe:c0a8:b501:7101 for protocols iiop, t3, ldap, snmp, http.>
<30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default[5]" is now listening on fe80:0:0:0:e437:fbfb:c9ee:9352:7101 for protocols iiop, t3, ldap, snmp, http.>
<30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default[7]" is now listening on 169.254.251.192:7101 for protocols iiop, t3, ldap, snmp, http.>
<30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default[8]" is now listening on fe80:0:0:0:8935:43d7:b990:fbc0:7101 for protocols iiop, t3, ldap, snmp, http.>
<30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default[11]" is now listening on fe80:0:0:0:f102:6891:b891:3efd:7101 for protocols iiop, t3, ldap, snmp, http.>
<30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default[4]" is now listening on fe80:0:0:0:0:5efe:a9fe:fbc0:7101 for protocols iiop, t3, ldap, snmp, http.>
<30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on fe80:0:0:0:0:5efe:c0a8:3b40:7101 for protocols iiop, t3, ldap, snmp, http.>
<30/Ago/2011 18H01m BST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
<30/Ago/2011 18H01m BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<30/Ago/2011 18H01m BST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>

Weblogic server wont start, password not accepted

The weblogic server doesn't start. The password for user weblogic is no longer
working. We applied licenses yesterday and somehow the weblogic user password
got corrupted. Any ideas on how the password can be reset.

The weblogic server doesn't start. The password for user weblogic is no longer
working. We applied licenses yesterday and somehow the weblogic user password
got corrupted. Any ideas on how the password can be reset.

Recently my phone updated itself to ios 7, it wont let me sign into my iphone app store to download apps,i click on an app i want it just clicks but doesn't start to download any help?

recently my phone updated to ios 7, it wont let me sign into my iphone app store to download apps,i click on an app i want and it just clicks but doesn't start to download, i can see thats its not signed in so i tried to re set up my account under the app store in settings , but its just a grey area and wont let me click to input any information. this happened right after i updated my phone, any help?

Hi SarahHannah,
If you are having trouble activating iMessage, this article contains relevant troubleshooting steps:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Take care,
- Ari

SAP NETWEAVER COMPOSITION ENVIRONMENT 7.1 EHP1 - System doesn't start

Hello, 
 
after i get the message the installation was succesfully and i start the server the proces jstart.exe 
 
doesn't start completely. 
 
in the trace file dev_jstart in find this error message: 
 
F Starting process: D:\usr\sap\CE1\SYS\exe\uc\NTI386\jstart.EXE 
F arg[ 1] = -nodeId=1000 
F arg[ 2] = pf=D:\usr\sap\CE1\SYS\profile\CE1_J00_sjodevb1 
F arg[ 3] = -DSAPINFO=CE1_00_collector 
F arg[ 4] = -hostvm 
F arg[ 5] = -nodeName=collector 
F arg[ 6] = -file=D:\usr\sap\CE1\SYS\exe\uc\NTI386\startup.properties 
F arg[ 7] = -jvmFile=D:\usr\sap\CE1\J00\work\jstart.jvm 
F arg[ 8] = -traceFile=D:\usr\sap\CE1\J00\work\dev_collector 
F arg[ 9] = -javaOutFile=D:\usr\sap\CE1\J00\work\jvm_collector.out 
F arg[10] = -clusterId=bootstrap 
F arg[11] = -exitcode 
F arg[12] = 503 
 
an in the tracefile log_bootstrap.0 this error message: 
 
[Nov 19, 2009 5:17:50 PM ] Exception of type com.sap.sql.log.OpenSQLException caught: Could not load class com.sap.dbtech.jdbc.DriverSapDB with class loader com.sap.engine.offline.FileClassLoader@6caf16..
[EXCEPTION]
com.sap.sql.log.OpenSQLException: Could not load class com.sap.dbtech.jdbc.DriverSapDB with class loader com.sap.engine.offline.FileClassLoader@6caf16.
 at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:104)
 at com.sap.sql.connect.factory.VendorConnectionFactory.createInstance(VendorConnectionFactory.java:210)
 at com.sap.sql.connect.factory.VendorConnectionFactory.createVendorDriver(VendorConnectionFactory.java:43)
 at com.sap.sql.connect.factory.DriverPooledConnectionFactory.<init>(DriverPooledConnectionFactory.java:31)
 at com.sap.sql.connect.datasource.DataSourceManager.createPooledConnectionFactory(DataSourceManager.java:546)
 at com.sap.sql.connect.datasource.DataSourceManager.createDataSource(DataSourceManager.java:505)
 at com.sap.sql.connect.datasource.DataSourceManager.createDataSource(DataSourceManager.java:136)
 at com.sap.sql.connect.OpenSQLDataSourceImpl.getDataSource(OpenSQLDataSourceImpl.java:272)
 at com.sap.sql.connect.OpenSQLDataSourceImpl.getPooledConnection(OpenSQLDataSourceImpl.java:208)
 at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:357)
 at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:157)
 at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>(PersistenceHandler.java:48)
 at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>(ConfigurationCache.java:127)
 at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:262)
 at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:39)
 at com.sap.engine.bootstrap.HelperImpl.getConfigurationHandlerFactory(HelperImpl.java:38)
 at com.sap.engine.bootstrap.Synchronizer.<init>(Synchronizer.java:111)
 at com.sap.engine.bootstrap.Bootstrap.initializeSynchronizer(Bootstrap.java:74)
 at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:229)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:585)
 at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:161)
Caused by: java.lang.ClassNotFoundException: com.sap.dbtech.jdbc.DriverSapDB
 at com.sap.engine.offline.FileClassLoader.findClass(FileClassLoader.java:909)
 at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:800)
 at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:748)
 at com.sap.sql.connect.factory.VendorConnectionFactory.createInstance(VendorConnectionFactory.java:206)
 ... 22 more
 
 
any idea? 
 
 
thank you for your help 
thomas 

Hi Angie,
You will find the needed information here - http://service.sap.com/~form/handler?_EVENT=DISP_NEW&_APP=00200682500000001303&00200682500000002804=01200615320900001418
Release to Customer Available 09.05.2007
Default Release Available 14.12.2007
Good Luck!!!
GLM

How do I fix a initializing problem with my macbook pro? I only get to the blank screen with the apple logo and the "processing something"sign... it just doesn't start the system....

How do I fix a initializing problem with my macbook pro? I only get to the blank screen with the apple logo and the "processing something" sign... it just doesn't start the system....
Please help
Marcelo

If there is no loading bar, it's usually a problem with a third party kext file in OS X itself.
You can press the power button down to force a hardware shutdown, then reboot holding the shift key down on a wired or built in keyboard, this will disable them and you go around and update your third party software.
Gray, Blue or White screen at boot, w/spinner/progress bar
Also take this time to backup your users files off the machine if possible.
Most commonly used backup methods
Sometime that won't work and you need to do more
..Step by Step to fix your Mac

Chromium doesn't start and suspend, shutdown don't work occassionally

Hello,
I have this problem on my laptop but since chromium doesn't start on my desktop either, I don't think it's specific to laptops.
When I try to start chromium in a terminal, I get a blank window (I can tell because I use spectrwm):
ATTENTION: default value of option force_s3tc_enable overridden by environment.
[25148:25148:0215/130205:ERROR:background_mode_manager_aura.cc(14)] Not implemented reached in virtual void BackgroundModeManager::EnableLaunchOnStartup(bool)
I temporarily resorted to using Firefox instead, but at times it just freezes up while opening some pages. After that point, even killing firefox doesn't help: the system load level keeps on rising. I used pidof to check if firefox is still running, but I had no output from pidof. After having firefox to freeze, shutdown, suspend, etc don't work. The laptop goes to a black screen state, but the power LED remains on indefinitely.
These might be two separate issues, but they started together on my laptop.
Thanks in advance!
Last edited by SgrA (2015-02-15 09:47:08)

I also have issues wich starting up chromium (google-chrome and opera too).
Feb 15 10:09:58 localhost kernel: [ 102.301038] chromium[786]: segfault at 7ffffd294ff8 ip 00007fb4386962b2 sp 00007ffffd295000 error 6 in chromium[7fb43371e000+66c6000]
Feb 15 10:12:16 localhost kernel: [ 240.102784] chromium D 0000000000000000 0 786 1 0x00000104
Feb 15 10:12:16 localhost kernel: [ 240.102789] ffff8800c2d5bb68 0000000000000082 ffff8800c5635a90 0000000000013640
Feb 15 10:12:16 localhost kernel: [ 240.102793] ffff8800c2d5bfd8 0000000000013640 ffffffff81818540 ffff8800c5635a90
Feb 15 10:12:16 localhost kernel: [ 240.102796] ffff8800c2d5bb78 0000000000000246 ffffffff81a52047 ffff88042f5eeb08
Feb 15 10:12:16 localhost kernel: [ 240.102799] Call Trace:
Feb 15 10:12:16 localhost kernel: [ 240.102809] [<ffffffff8109e777>] ? try_to_wake_up+0x1e7/0x380
Feb 15 10:12:16 localhost kernel: [ 240.102814] [<ffffffff81551599>] schedule+0x29/0x70
Feb 15 10:12:16 localhost kernel: [ 240.102818] [<ffffffff81553e25>] rwsem_down_write_failed+0x175/0x360
Feb 15 10:12:16 localhost kernel: [ 240.102823] [<ffffffff812c0e63>] call_rwsem_down_write_failed+0x13/0x20
Feb 15 10:12:16 localhost kernel: [ 240.102827] [<ffffffff81553604>] ? down_write+0x24/0x40
Feb 15 10:12:16 localhost kernel: [ 240.102832] [<ffffffff8122c5cd>] do_coredump+0x16d/0xf30
Feb 15 10:12:16 localhost kernel: [ 240.102837] [<ffffffff81080524>] ? force_sig_info+0xd4/0xf0
Feb 15 10:12:16 localhost kernel: [ 240.102841] [<ffffffff8107e3d7>] ? __sigqueue_free.part.15+0x37/0x40
Feb 15 10:12:16 localhost kernel: [ 240.102846] [<ffffffff8108180c>] get_signal+0x38c/0x710
Feb 15 10:12:16 localhost kernel: [ 240.102852] [<ffffffff81014617>] do_signal+0x37/0x800
Feb 15 10:12:16 localhost kernel: [ 240.102855] [<ffffffff81550f08>] ? __schedule+0x3e8/0xa50
Feb 15 10:12:16 localhost kernel: [ 240.102859] [<ffffffff81014e48>] do_notify_resume+0x68/0xa0
Feb 15 10:12:16 localhost kernel: [ 240.102863] [<ffffffff81556322>] retint_signal+0x48/0x86
Feb 15 10:12:16 localhost kernel: [ 240.102871] Watchdog D 0000000000000004 0 794 1 0x00000104
Feb 15 10:12:16 localhost kernel: [ 240.102874] ffff880402757d40 0000000000000082 ffff8800c5632840 0000000000013640
Feb 15 10:12:16 localhost kernel: [ 240.102877] ffff880402757fd8 0000000000013640 ffff880418841420 ffff8800c5632840
Feb 15 10:12:16 localhost kernel: [ 240.102880] ffff880402757ce8 ffff880402757e70 00000000ffffff92 ffff880402757c98
Feb 15 10:12:16 localhost kernel: [ 240.102883] Call Trace:
Feb 15 10:12:16 localhost kernel: [ 240.102888] [<ffffffff810dbe32>] ? hrtimer_cancel+0x22/0x30
Feb 15 10:12:16 localhost kernel: [ 240.102893] [<ffffffff810ed4e6>] ? futex_wait+0x206/0x280
Feb 15 10:12:16 localhost kernel: [ 240.102897] [<ffffffff810dbbc0>] ? __run_hrtimer+0x250/0x250
Feb 15 10:12:16 localhost kernel: [ 240.102900] [<ffffffff81551599>] schedule+0x29/0x70
Feb 15 10:12:16 localhost kernel: [ 240.102903] [<ffffffff81553c65>] rwsem_down_read_failed+0xe5/0x130
Feb 15 10:12:16 localhost kernel: [ 240.102906] [<ffffffff810ed0d0>] ? futex_wake+0x80/0x160
Feb 15 10:12:16 localhost kernel: [ 240.102910] [<ffffffff812c0e34>] call_rwsem_down_read_failed+0x14/0x30
Feb 15 10:12:16 localhost kernel: [ 240.102913] [<ffffffff815535d7>] ? down_read+0x17/0x20
Feb 15 10:12:16 localhost kernel: [ 240.102918] [<ffffffff81060aed>] __do_page_fault+0x1ed/0x600
Feb 15 10:12:16 localhost kernel: [ 240.102923] [<ffffffff8110e7f9>] ? seccomp_phase1+0x99/0x210
Feb 15 10:12:16 localhost kernel: [ 240.102927] [<ffffffff81060f22>] do_page_fault+0x22/0x30
Feb 15 10:12:16 localhost kernel: [ 240.102930] [<ffffffff81557598>] page_fault+0x28/0x30
Feb 15 10:12:43 localhost kernel: [ 267.288947] chromium[920]: segfault at 7fff3faceff8 ip 00007fa90fcc62bc sp 00007fff3facf000 error 6 in chromium[7fa90ad4e000+66c6000]
It started happening after upgrade:
[2015-02-15 09:43] [ALPM] upgraded chromium (40.0.2214.94-1 -> 40.0.2214.111-1)
I was wondering if it has anything to do with some X-related upgrades:
[2015-02-15 09:42] [ALPM] upgraded xorg-server-common (1.16.3-2 -> 1.16.4-1)
[2015-02-15 09:43] [ALPM] upgraded xorg-server (1.16.3-2 -> 1.16.4-1)
[2015-02-15 09:48] [ALPM] upgraded xorg-server-devel (1.16.3-2 -> 1.16.4-1)
[2015-02-15 09:45] [ALPM] upgraded nvidia (346.35-5 -> 346.35-6)
I tried to downgrade chromimu to 40.0.2214.94-1 and it didn't help. I tried to downgrade nvidia, xorg-server and xorg-server-devel to previous versions, when everything worked and X chouldn't start.
Other observations are that if I start chromium, the ps command hangs and I have to reboot the system to be able to use ps command again.
Linux lisa 3.18.6-1-ARCH #1 SMP PREEMPT Sat Feb 7 08:44:05 CET 2015 x86_64 GNU/Linux
It's worth mentioning that I also run spectrwm, like SgrA, however i don't have other issues with freezing on shutdown etc.

Remote Update Manager on Yosemite doesn't start

Hi to all, I have recently updated my 15 iMac (year 2012) to Yosemite.
After the upgrade, the Adobe Remote Update Manager tool doesn't start, with an error 1.
In the console, I see these lines:
Any suggestions?
Many thanks

Same problem here on my wife's mid-2012 Macbook Air. Really annoying.

Apple logo comes up but ipod doesn't start

When I turn on the device the Apple logo comes up but the ipod doesn't start and go to the menus it just stays with the logo. When I hold down the play/pause on the click wheel to put it to sleep a symbol of a triangle with an exclamation point in the center comes up along with "www.apple.com/support/ipod." I tried rebooting it with Menu/select but nothing happens.

Unfortunately, on a "classic" iPod that uses a hard drive for storage, the most likely cause is a faulty hard drive.
You can try putting the iPod into Disk Mode
http://support.apple.com/kb/HT1363
If that works, connect it to the computer and run iTunes. iTunes may prompt you to do a Restore. This will erase the iPod, re-install its software, and set it to default settings. If the cause is data corruption or a software issue (and the hard drive has no physical problem), the Restore should fix it.

Doesn't start when starting as administrator. Error Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.

Update firefox, it asked me to update flash, I tried to update flash but it said I had to close firefox. A box came up and said the Flash install would continue when I closed firefox. I closed all firefox windows and no update of flash occurred. I tried relaunching firefox but got the "Doesn't start when starting as administrator. Error Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system." message. I rebooted the system, no improvement. I tried to run firefox as administrator and got the same message. Either I find a fix or I won't be able to use firefox and will have to go back to ie.

-> press '''CTRL''' + '''SHIFT''' + '''ESC''' to Open Task Manager -> Processes tab -> right-click '''firefox.exe''' and click '''End Process Tree''' -> close Task Manager
Troubleshooting extensions and themes
* https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Troubleshooting plugins
* https://support.mozilla.com/en-US/kb/Troubleshooting%20plugins
Check and tell if its working.

RT app doesn't start on power-up or re-boot

Hi Again, Gang:
This one is stumping me. I've finished a cRIO application, and am now in the process of getting it ready for distribution. The RT part of the app runs fine when I upload it from the host PC. When I set the app to run at startup from NV RAM, it doesn't run. Well, actually, to make matters worse--it DID run ONCE! This morning I powered the cRIO, then did other things for a while. I later looked at the unit and saw the user LED was flashing the sequence that says it's working.
I've read through the troubleshooting stuff on the web site. I've FTPd into the box and it looks like it's set up right. The dip switches are all off. I've waited for 10 mins to see if comes up after a while. I've experimented with the FPGA upload settings to see if that's the issue. (The RT won't get very far if the FPGA doesn't start) Is it possible that something with the shared variable engine is holding it up?
I'm about out of ideas. I really hope that someone can give me some!
Thanks in advance!
Roger

hi!!
Have you got any solutions. it seems there some bugs in lv2010. we are facing similar problems. some times every thing works but after restart it shows some error(blinking of yellow LED on RT).some time variable are not being published .i am working with mutltiple target in a single project. i have tried all options like auto deploy variable(ON/OFF)
seperate libraries for each target eventhough applications is similar for all targets. Just shareing my experience(pain)
Regards
Nageswar

Weblogic doesn't start up

Similar Messages

Maybe you are looking for