Weblogic Domain creation failing in Linux
Hi Every one ..Need ur help .
I was trying to create the domain in 9.2mp3 and 10g3 and is failing repeatedly..
This is the error message am getting ..
Exception in thread "main" java.lang.NoClassDefFoundError: weblogic.WLST
at gnu.gcj.runtime.FirstThread.run() (/usr/lib64/libgcj.so.5.0.0)
at JvThreadRun(java.lang.Thread) (/usr/lib64/libgcj.so.5.0.0)
at JvRunMain(java.lang.Class, byte const, int, byte const, boolean) (/usr/lib64/libgcj.so.5.0.0)
at __gcj_personality_v0 (/tmp/InstallScripts/java.version=1.4.2)
at __libc_start_main (/lib64/tls/libc-2.3.4.so)
at JvRegisterClasses (/tmp/InstallScripts/java.version=1.4.2)
WARRNING: domain creation failed!
Your suggestions are appreciated.
need add weblogic.jar to classpath when run WLST,like
java -cp /app/weblogic/weblogic92/server/lib/weblogic.jar weblogic.WLST
Similar Messages
-
Weblogic domain creation fails with "The domain location must have write permission."
Hi
I am trying to install and setup weblogic in Linux RHEL 5.4
so I can test webservices . This is what i have done
WLS Zip Distribution for Oracle WebLogic Server 12.1.1.0 - downloaded & installed.
Followed the steps in README.
- extract contents of tar, setup home, run installation-configuration script, setup wls environment
Step 5:
Create a new WLS domain and start WLS. It is recommended that you create domains outside the MW_HOME.
$ mkdir /home/myhome/mydomain
$ cd /home/myhome/mydomain
$ $JAVA_HOME/bin/java $JAVA_OPTIONS -Xmx1024m -XX:MaxPermSize=128m weblogic.Server
-> returns the below error
$JAVA_HOME/bin/java $JAVA_OPTIONS -Xmx1024m -XX:MaxPermSize=128m weblogic.Server -Dweblogic.security.allowCryptoJDefaultJCEVerification=true
<Jun 25, 2013 3:39:57 PM EDT> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Jun 25, 2013 3:39:57 PM EDT> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Jun 25, 2013 3:39:58 PM EDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) 64-Bit Server VM Version 23.21-b01 from Oracle Corporation.>
/apps/Informatica/tdwdomain/config not found
No config.xml was found.
Would you like the server to create a default configuration and boot? (y/n): y
<Jun 25, 2013 3:40:03 PM EDT> <Info> <Management> <BEA-140013> </apps/Informatica/tdwdomain/config not found>
<Jun 25, 2013 3:40:03 PM EDT> <Info> <Security> <BEA-090065> <Getting boot identity from user.>
Enter username to boot WebLogic server:admin Enter password to boot WebLogic server:admin123
For confirmation, please re-enter password required to boot WebLogic server:admin123
<Jun 25, 2013 3:40:13 PM EDT> <Info> <Management> <BEA-141254> <Generating new domain directory in /apps/Informatica/tdwdomain.>
<Jun 25, 2013 3:40:17 PM EDT> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
There are 1 nested errors:
weblogic.management.ManagementException: Failure during domain creation
at weblogic.management.internal.DomainGenerator.generateDefaultDomain(DomainGenerator.java:119)
at weblogic.management.internal.DomainDirectoryService.start(DomainDirectoryService.java:82)
at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:461)
at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:166)
at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:883)
at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:570)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:469)
at weblogic.Server.main(Server.java:74)
Caused by: com.oracle.cie.domain.script.ScriptException: The domain location must have write permission.
at com.oracle.cie.domain.script.ScriptExecutor.writeDomain(ScriptExecutor.java:757)
at com.oracle.cie.domain.script.ScriptParserClassic$StateMachine.processWrite(ScriptParserClassic.java:573)
at com.oracle.cie.domain.script.ScriptParserClassic$StateMachine.execute(ScriptParserClassic.java:429)
at com.oracle.cie.domain.script.ScriptParserClassic.parseAndRun(ScriptParserClassic.java:148)
at com.oracle.cie.domain.script.ScriptParserClassic.doExecute(ScriptParserClassic.java:110)
at com.oracle.cie.domain.script.ScriptParser.execute(ScriptParser.java:72)
at com.oracle.cie.domain.DomainInfoHelper.executeSilentScript(DomainInfoHelper.java:854)
at com.oracle.cie.domain.DomainInfoHelper.createDefaultDomain(DomainInfoHelper.java:1775)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:601)
at weblogic.management.internal.CIEDomainGenerator.generateDefaultDomain(CIEDomainGenerator.java:62)
at weblogic.management.internal.DomainGenerator.generateDefaultDomain(DomainGenerator.java:114)
<Jun 25, 2013 3:40:17 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED.>
<Jun 25, 2013 3:40:17 PM EDT> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down.>
<Jun 25, 2013 3:40:17 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN.>
- Any help appreciated.
Thankshi,
the binaries available for download are all packaged with 32bit JVM. Please have a look at the link below
WebLogic Server 12c (12.1.1), WebLogic Server 11g (10.3.6) and Previous Releases
It also has binaries for linux available. I am quoting from the site verbatim for your reference:
The following provides links to WebLogic Server 12.1.1 installers with 32-bit JVMs for Windows and
Linux, the generic installer that can be used on any supported platform, and the zip distribution. The
generic installer and the zip distribution do not include a JVM/JDK. For instructions on using the
generic installer, see this document.
In case you want to use your own latest version of JDK which can be a 32/64 bit version, you need to use the generic installer.
The error which you are getting is due to permissions. Make sure you have a dedicated user for installing weblogic and the necessary permissions are granted to the user(linux) to the installation directories. May be the script is trying to install java at a particular location on your machine and failing. Hence the above error is displayed.
Please have a look at the docs, you will find steps for weblogic installation on linux.
Thanks,
Souvik. -
Oracle 11g(11.1.1.6) SOA Domain creation failed
Hi ,
I am new to SOA .I have downloaded s/w from OTN (ORACLE) site .I have followed the quick start guide for installation .Everything went well
I have successfully installed oracle XE ,weblogic server,OEPE,RCU,OracleServiceBus.
When I try to create a Soa domain.I am getting following exception
Preparing...
Extracting Domain Contents...
Creating Domain Security Information...
Domain Creation Failed!
Domain Location: C:\demos\domains\SOAOSBPS4DevDomain
Reason: null
Exception:
Traceback (innermost last):
File "<iostream>", line 6, in ?
File "<iostream>", line 21, in cd
at com.oracle.cie.domain.script.jython.CommandExceptionHandler.handleException(CommandExceptionHandler.java:51)
at com.oracle.cie.domain.script.jython.WLScriptContext.handleException(WLScriptContext.java:1538)
at com.oracle.cie.domain.script.jython.WLScriptContext.cd(WLScriptContext.java:602)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
com.oracle.cie.domain.script.jython.WLSTException: com.oracle.cie.domain.script.jython.WLSTException: com.oracle.cie.domain.script.ScriptException: No nested element JDBCDriverParams is found
I have selected converttoRACMultiDatasource radio button
If I dont select that radion button Soa domain is getting created successfully
Can anyone please let me know what could be the problem
ThanksHi Vijay
I have checked the post and tested the same on my installation everything looks right
SQL> SELECT comp_id, comp_name, version, status, mrc_name, owner FROM schema_ver
sion_registry;
COMP_ID
COMP_NAME
VERSION STATUS MRC_NAME
OWNER
BAM
BAM Services
11.1.1.5.0 VALID DEV
DEV_ORABAM
COMP_ID
COMP_NAME
VERSION STATUS MRC_NAME
OWNER
MDS
Metadata Services
11.1.1.6.0 VALID DEV
DEV_MDS
COMP_ID
COMP_NAME
VERSION STATUS MRC_NAME
OWNER
ORASDPM
SDP Messaging
11.1.1.6.0 VALID DEV
DEV_ORASDPM
COMP_ID
COMP_NAME
VERSION STATUS MRC_NAME
OWNER
SOAINFRA
SOA Infrastructure Services
11.1.1.6.0 VALID DEV
DEV_SOAINFRA
can any body suggest what will be wrong.I have been on this issue since 2 weeks -
Domain creation failed during OBIEE 11.1.1.6.0 installation
Hi,
I'm installing OBIEE 11.1.1.6.0 on Windows 7 Enterprise serv pack 1 64 bit computer. Installation went well till domain creation and domain creation failed.
how can I fix this issue. appreciate your help.
Thanks
Jay.I can see below exception in Installation log......I uninstalled and installed again still getting same error. how can I fix it?
Creating Weblogic Domain.
oracle.as.provisioning.exception.ASProvWorkflowException
at oracle.as.provisioning.weblogic.ASDomain._createDomain(ASDomain.java:2958)
at oracle.as.provisioning.weblogic.ASDomain.createDomain(ASDomain.java:2476)
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:633)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:48)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:113)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:371)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:64)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:160)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
oracle.as.provisioning.exception.ASProvisioningException
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:48)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:113)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:371)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:64)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:160)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
Caused by: oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:686)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
... 14 more -
Weblogic Domain creation silent scripts
Is there is any documentation about silent scripts syntax ?
I'm trying to automate weblogic domain creation from ant and I would like to get
more info about silent scrpt syntax"Giedrius" <[email protected]> wrote:
>
Is there is any documentation about silent scripts syntax ?Yes, if you're refering to Silent-Mode installation:
http://edocs.bea.com/wls/docs70/install/instsil.html
Both Windows and UNIX platforms are covered.
Brian J. Mitchell
Systems Administrator, TRX
email: [email protected] -
Error during weblogic domain creation using template.
Hi,
I have 2 machines(lets say Old and New). I have installed weblogic 10.3.5 in my Old machine where in I have used RCU 11.1.1.50. I have created a template of this domain. Now I have Weblogic 10.3.6 in my New machine and have used RCU 11.1.1.6.0. I am creating domain using the template created from Old machine where I am getting this error:
Component Schema=SOA Infrastructure
Driver=oracle.jdbc.xa.client.OracleXADataSource
URL=jdbc:oracle:thin:@localhost:1521/fcubs
User=DEV_SOAINFRA
Password=******
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='SOAINFRA' and version='11.1.1.5.0'
CFGFWK-60850: Test Failed!
CFGFWK-60853: A connection was established to the database but no rows were returned from the test SQL statement.
Component Schema=User Messaging Service
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@localhost:1521/fcubs
User=DEV_ORASDPM
Password=******
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='ORASDPM' and version='11.1.1.2.0'
CFGFWK-60850: Test Failed!
CFGFWK-60853: A connection was established to the database but no rows were returned from the test SQL statement.
Component Schema=OWSM MDS Schema
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@localhost:1521/fcubs
User=DEV_MDS
Password=******
SQL Test=select 1 from schema_version_registry where
+ owner=(select user from dual) and mr_type='MDS' and+
+ version='11.1.1.5.0'+
CFGFWK-60850: Test Failed!
CFGFWK-60853: A connection was established to the database but no rows were returned from the test SQL statement.
Component Schema=SOA MDS Schema
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@localhost:1521/fcubs
User=DEV_MDS
Password=******
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='MDS' and version='11.1.1.5.0'
CFGFWK-60850: Test Failed!
CFGFWK-60853: A connection was established to the database but no rows were returned from the test SQL statement.
Please help.
AbhayYou may simply ignore these errors. They are harmless.
As you created the template using older version, it is trying to find older version entry in new schema created by higher version of RCU and hence it is expected to fail.
Regards,
Anuj -
Weblogic domain extending failing
Hi ,
I am trying to update the existing domain but at the end of the step it fails with the below error. Any suggestion .?
com.oracle.cie.domain.security.external.ConfigSecurityException: oracle.security.opss.tools.lifecycle.LifecycleException: The schema DEV_OPSS is already in use for security store(s). Please create a new schema.
Thanks
RaghavI am getting similar error during ADF configuration with extending base_domain.
oracle.security.opss.tools.lifecycle.cie.OpssSecurityConfiguration - Error while processing initializeSubsystem. Exception oracle.security.opss.tools.lifecycle.LifecycleException: JPS-06501: Keystore demoidentity in stripe system already exists -
SOA Domain Creation Failed with FATAL Error
Hi,
I am in process of installing Oracle AIA FP. Before that I have to install and configure Oracle DB, WLS and SOA Suite with SOA Domain.
I installed everything with no error message. But when I am trying to create a new SOA Domain using './config.sh' from 'MW_HOME/Oracle_SO1/common/bin' directory, on second step where we select which components I want to add in my domain I selected following components;
1) Oracle SOA Suite
2) Oracle Enterprise Manager
3) Oracle Business Activity Monitor
4) Oracle WSM Policy Mmanager
5) Oracle JRF WebServices Async Services
6) Oracle JRF
7) WebLogic Advance Web Services for JAX-WS Extension
Note: All components are 11.1.1.0
As soon as I press 'Next' within 5-7 seconds a small windows pop ups saying *'A fatal error has occurred. This application will terminate'* with 'OK' button and 'config.sh' script finishes.
I am using AIX 5.3 and have following environment variables set before I execute 'config.sh'
export LANG=LC_ALL
export SKIP_ROOTPRE=TRUE
Also I just wanted to add that I installed it before and it worked fine and the I removed everything using 'rm -fr' and now reinstalling it again the whole thing.
Your help will be appreciated.
SJunejoHello Shiv,
I'm not able to log on to the default domain. If I creates a new domain the same problem apears. It is possible to build and deploy the TaskActionHandler in the new created domain?
Best regards
--tom -
Domain creation failed with patchset 10.1.3.3
Hi,
I have upgraded the SAO Suite 10.1.3.1 on my windows laptop with the Patchset 10.1.3.3. Next I create a new BPEL domain on BPEL Admin Console. It seems the domain is created correctly. The Logfile contains some errors. Perhaps the Process in the suitcase bpel_TaskActionHandler_1.0.jar has a incorrect format. I can't deploy any BPEL process to the process manager. What is going wrong during the installation of the patchset?
<2007-09-25 11:32:11,559> <INFO> <collaxa> <ServerManager::createDomain> Successfully created domain zonk under C:\oracle\OracleAS\bpel\domains\zonk
07/09/25 11:32:11 javax.ejb.EJBException: com.collaxa.cube.ejb.impl.BPELDomainManagerBean.getSyncStatistics(int, com.oracle.bpel.client.auth.DomainAuth); nested exception is: java.lang.NoSuchMethodException: com.collaxa.cube.ejb.impl.BPELDomainManagerBean.getSyncStatistics(int, com.oracle.bpel.client.auth.DomainAuth)
07/09/25 11:32:11 java.lang.NoSuchMethodException: com.collaxa.cube.ejb.impl.BPELDomainManagerBean.getSyncStatistics(int, com.oracle.bpel.client.auth.DomainAuth)
07/09/25 11:32:11 at java.lang.Class.getMethod(Class.java:1581)
07/09/25 11:32:11 at com.evermind.server.ejb.interceptor.MethodStateFactory.createMethodState(MethodStateFactory.java:112)
07/09/25 11:32:11 at com.evermind.server.ejb.deployment.ExposableBeanDescriptor.createMethodStates(ExposableBeanDescriptor.java:657)
07/09/25 11:32:11 at com.evermind.server.ejb.deployment.ExposableBeanDescriptor.getRemoteComponentMethodStates(ExposableBeanDescriptor.java:723)
07/09/25 11:32:11 at com.evermind.server.ejb.deployment.ExposableBeanDescriptor.getMethodState(ExposableBeanDescriptor.java:599)
07/09/25 11:32:11 at com.evermind.server.ejb.AbstractEJBObject.OC4J_getMethodState(AbstractEJBObject.java:385)
07/09/25 11:32:11 at DomainManagerBean_RemoteProxy_4bin6i8.loadSuitcaseArchive(Unknown Source)
07/09/25 11:32:11 at com.collaxa.cube.engine.deployment.CubeProcessMonitorWork.run(CubeProcessMonitorWork.java:113)
07/09/25 11:32:11 at oracle.tip.adapter.fw.jca.work.WorkerJob.go(WorkerJob.java:51)
07/09/25 11:32:11 at oracle.tip.adapter.fw.common.ThreadPool.run(ThreadPool.java:272)
07/09/25 11:32:11 at java.lang.Thread.run(Thread.java:595)
07/09/25 11:32:11 javax.ejb.EJBException: com.collaxa.cube.ejb.impl.BPELDomainManagerBean.getSyncStatistics(int, com.oracle.bpel.client.auth.DomainAuth); nested exception is: java.lang.NoSuchMethodException: com.collaxa.cube.ejb.impl.BPELDomainManagerBean.getSyncStatistics(int, com.oracle.bpel.client.auth.DomainAuth)
07/09/25 11:32:11 at com.evermind.server.ejb.EJBUtils.createEJBException(EJBUtils.java:365)
07/09/25 11:32:11 at com.evermind.server.ejb.EJBUtils.createEJBException(EJBUtils.java:356)
07/09/25 11:32:11 at com.evermind.server.ejb.interceptor.MethodStateFactory.createMethodState(MethodStateFactory.java:115)
07/09/25 11:32:11 at com.evermind.server.ejb.deployment.ExposableBeanDescriptor.createMethodStates(ExposableBeanDescriptor.java:657)
07/09/25 11:32:11 at com.evermind.server.ejb.deployment.ExposableBeanDescriptor.getRemoteComponentMethodStates(ExposableBeanDescriptor.java:723)
07/09/25 11:32:11 at com.evermind.server.ejb.deployment.ExposableBeanDescriptor.getMethodState(ExposableBeanDescriptor.java:599)
07/09/25 11:32:11 at com.evermind.server.ejb.AbstractEJBObject.OC4J_getMethodState(AbstractEJBObject.java:385)
07/09/25 11:32:11 at DomainManagerBean_RemoteProxy_4bin6i8.loadSuitcaseArchive(Unknown Source)
07/09/25 11:32:11 at com.collaxa.cube.engine.deployment.CubeProcessMonitorWork.run(CubeProcessMonitorWork.java:113)
07/09/25 11:32:11 at oracle.tip.adapter.fw.jca.work.WorkerJob.go(WorkerJob.java:51)
07/09/25 11:32:11 at oracle.tip.adapter.fw.common.ThreadPool.run(ThreadPool.java:272)
07/09/25 11:32:11 at java.lang.Thread.run(Thread.java:595)
07/09/25 11:32:11 Caused by: java.lang.NoSuchMethodException: com.collaxa.cube.ejb.impl.BPELDomainManagerBean.getSyncStatistics(int, com.oracle.bpel.client.auth.DomainAuth)
07/09/25 11:32:11 at java.lang.Class.getMethod(Class.java:1581)
07/09/25 11:32:11 at com.evermind.server.ejb.interceptor.MethodStateFactory.createMethodState(MethodStateFactory.java:112)
07/09/25 11:32:11 ... 9 more
<2007-09-25 11:32:11,684> <ERROR> <zonk.collaxa.cube.engine.deployment> <CubeProcessMonitorWork::run> Error while loading process archive C:\oracle\OracleAS\bpel\domains\zonk\deploy\bpel_TaskActionHandler_1.0.jar
javax.ejb.EJBException: com.collaxa.cube.ejb.impl.BPELDomainManagerBean.getSyncStatistics(int, com.oracle.bpel.client.auth.DomainAuth); nested exception is: java.lang.NoSuchMethodException: com.collaxa.cube.ejb.impl.BPELDomainManagerBean.getSyncStatistics(int, com.oracle.bpel.client.auth.DomainAuth)
java.lang.NoSuchMethodException: com.collaxa.cube.ejb.impl.BPELDomainManagerBean.getSyncStatistics(int, com.oracle.bpel.client.auth.DomainAuth)
Message was edited by:
tomkuehn
After opened the BPEL Console the following error stack will be displayed:
Build-Informationen:
***************************************************************************** Oracle BPEL Server Version 10.1.3.3.0 Build: 0 Build-Dauer: Fri Jun 15 06:05:31 PDT 2007 Build-Typ: release Quell-Tag: PCBPEL_10.1.3.3.0_GENERIC_070615.0525
Exception-Meldung:
[java.lang.NoSuchMethodException] com.collaxa.cube.ejb.impl.FinderBean.tryLookupInstanceByReferenceId(java.lang.String, com.oracle.bpel.client.auth.DomainAuth)
Exception Meldung:
java.lang.NoSuchMethodException: com.collaxa.cube.ejb.impl.FinderBean.tryLookupInstanceByReferenceId(java.lang.String, com.oracle.bpel.client.auth.DomainAuth) at java.lang.Class.getMethod(Class.java:1581) at com.evermind.server.ejb.interceptor.MethodStateFactory.createMethodState(MethodStateFactory.java:112) at com.evermind.server.ejb.deployment.ExposableBeanDescriptor.createMethodStates(ExposableBeanDescriptor.java:657) at com.evermind.server.ejb.deployment.ExposableBeanDescriptor.getRemoteComponentMethodStates(ExposableBeanDescriptor.java:723) at com.evermind.server.ejb.deployment.ExposableBeanDescriptor.getMethodState(ExposableBeanDescriptor.java:599) at com.evermind.server.ejb.AbstractEJBObject.OC4J_getMethodState(AbstractEJBObject.java:385) at FinderBean_RemoteProxy_4bin6i8.lookupDomain(Unknown Source) at com.oracle.bpel.client.Locator.lookupDomain(Locator.java:228) at index.jspService(_index.java:78) at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65) at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396) at java.security.AccessController.doPrivileged(Native Method) at javax.security.auth.Subject.doAsPrivileged(Subject.java:517) at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370) at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:259) at com.evermind.server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:51) at com.evermind.server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:193) at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:283) at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:198) at com.collaxa.cube.fe.DomainFilter.doFilter(DomainFilter.java:131) at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15) at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396) at java.security.AccessController.doPrivileged(Native Method) at javax.security.auth.Subject.doAsPrivileged(Subject.java:517) at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370) at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453) at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111) at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260) at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303) at java.lang.Thread.run(Thread.java:595)Hello Shiv,
I'm not able to log on to the default domain. If I creates a new domain the same problem apears. It is possible to build and deploy the TaskActionHandler in the new created domain?
Best regards
--tom -
Integrated Weblogic domain Creation error in jdeveloper
Hi all,
Hope all are doing well,
I have faced a problem creating a integrated domain in jdeveloper log file show
Log File: C:\Users\chakrapani\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\o.j2ee.adrs\CreateDefaultDomain.log
Label: JDEVADF_11.1.1.6.0_GENERIC_111205.1733.6192.1
Product Home: F:\Oracle\Middleware\jdev11g\jdeveloper\jdev\
Domain: C:\Users\chakrapani\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain
"F:\Oracle\Middleware\jdev11g\oracle_common\common\bin\wlst.cmd" "C:\Users\chakrapani\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\o.j2ee.adrs\CreateDefaultDomain.py"
Process started
wlst > '"F:\Oracle\MIDDLE~1\jdev11g\utils\config\10.3\setHomeDirs.cmd"' is not recognized as an internal or external command,
wlst > operable program or batch file.
wlst > The system cannot find the path specified.
Please provide a solutions...Have you set a middle ware home environment variable?
Looks like you try to install the wls in a different home.
Timo -
WLST Domain Creation using JRF template throws SQLRecoverableException
I am working on domain creation using templates and included the JRF template to use OPSS functionality.
I have run the RCU utility to create the required components that will have necessary tables to host OPSS data and also tested that it works with CC_STB user that i will use to connect from WLS.
I am able to ping the database server having RCU components from the VM where i want to create and configure the domain but when i configure the LocalSvcTblDataSource with the same ip address and try to setup the OPSS datasources, it gives me "Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified Error Code: 17002"
Below is my WLST python script:
#=======================================================================================
# Open a domain template.
#=======================================================================================
readTemplate("/u01/app/mw/Oracle_Home/wlserver/common/templates/wls/wls.jar")
#=======================================================================================
# Update the domain to enable the WebLogic Server domain with JRF and EM.
#=======================================================================================
addTemplate('/u01/app/mw/Oracle_Home/oracle_common/common/templates/wls/oracle.jrf_template_12.1.2.jar')
addTemplate('/u01/app/mw/Oracle_Home/em/common/templates/wls/oracle.em_wls_template_12.1.2.jar')
#=======================================================================================
# Configure the Administration Server and SSL port.
# To enable access by both local and remote processes, you should not set the
# listen address for the server instance (that is, it should be left blank or not set).
# In this case, the server instance will determine the address of the machine and
# listen on it.
#=======================================================================================
cd('Servers/AdminServer')
set('ListenAddress','')
set('ListenPort', 7001)
create('AdminServer','SSL')
cd('SSL/AdminServer')
set('Enabled', 'True')
set('ListenPort', 7002)
#=======================================================================================
# Define the user password for weblogic.
#=======================================================================================
cd('/')
cd('Security/base_domain/User/weblogic')
# Please set password here before using this script, e.g. cmo.setPassword('value')
cmo.setPassword('password')
#=======================================================================================
# Create and configure a JDBC Data Source, and sets the JDBC user.
#=======================================================================================
# Get RCU Configuration using RCU service table (STB) schema credentials
cd('/')
cd('JDBCSystemResource/LocalSvcTblDataSource/JdbcResource/LocalSvcTblDataSource')
cd('JDBCDriverParams/NO_NAME_0')
set('DriverName','oracle.jdbc.OracleDriver')
set('URL','jdbc:oracle:thin:@XX.XX.XX.XX:15210/xe')
set('PasswordEncrypted', 'password')
set('UseXADataSourceInterface', 'false')
cd('Properties/NO_NAME_0')
cd('Property/user')
cmo.setValue('CC_STB')
getDatabaseDefaults()
#=======================================================================================
# Write the domain and close the domain template.
#=======================================================================================
setOption('OverwriteDomain', 'true')
writeDomain('/u01/data/user_projects/domains/cc_domain')
closeTemplate()
#=======================================================================================
# Exit WLST.
#=======================================================================================
exit()
And the complete exception trace.
Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified
Error Code: 17002
Error: writeDomain() failed. Do dumpStack() to see details.
wls:/offline/base_domain>dumpStack();
com.oracle.cie.domain.script.jython.WLSTException: com.oracle.cie.domain.script.ScriptException: Domain Creation Failed!
Domain Location: /u01/data/user_projects/domains/cc_domain
Reason: oracle.security.opss.tools.lifecycle.LifecycleException: oracle.security.jps.service.policystore.PolicyStoreException: javax.persistence.PersistenceException: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.4.2.v20130514-5956486): org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified
Error Code: 17002
Exception:
oracle.security.opss.tools.lifecycle.LifecycleException: oracle.security.jps.service.policystore.PolicyStoreException: javax.persistence.PersistenceException: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.4.2.v20130514-5956486): org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified
Error Code: 17002
at com.oracle.cie.domain.script.jython.CommandExceptionHandler.handleException(CommandExceptionHandler.java:55)
at com.oracle.cie.domain.script.jython.WLScriptContext.handleException(WLScriptContext.java:1967)
at com.oracle.cie.domain.script.jython.WLScriptContext.writeDomain(WLScriptContext.java:1126)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:606)
at org.python.core.PyReflectedFunction.__call__(Unknown Source)
at org.python.core.PyMethod.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.core.PyInstance.invoke(Unknown Source)
at org.python.pycode._pyx5.writeDomain$15(/tmp/WLSTOfflineIni4846195865917165143.py:73)
at org.python.pycode._pyx5.call_function(/tmp/WLSTOfflineIni4846195865917165143.py)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyFunction.__call__(Unknown Source)
at org.python.pycode._pyx93.f$0(<console>:1)
at org.python.pycode._pyx93.call_function(<console>)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyCode.call(Unknown Source)
at org.python.core.Py.runCode(Unknown Source)
at org.python.core.Py.exec(Unknown Source)
at org.python.util.PythonInterpreter.exec(Unknown Source)
at org.python.util.InteractiveInterpreter.runcode(Unknown Source)
at org.python.util.InteractiveInterpreter.runsource(Unknown Source)
at org.python.util.InteractiveInterpreter.runsource(Unknown Source)
at weblogic.management.scripting.WLST.main(WLST.java:219)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:606)
at weblogic.WLST.main(WLST.java:29)
Caused by: com.oracle.cie.domain.script.ScriptException: Domain Creation Failed!
Domain Location: /u01/data/user_projects/domains/cc_domain
Reason: oracle.security.opss.tools.lifecycle.LifecycleException: oracle.security.jps.service.policystore.PolicyStoreException: javax.persistence.PersistenceException: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.4.2.v20130514-5956486): org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified
Error Code: 17002
Exception:
oracle.security.opss.tools.lifecycle.LifecycleException: oracle.security.jps.service.policystore.PolicyStoreException: javax.persistence.PersistenceException: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.4.2.v20130514-5956486): org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified
Error Code: 17002
at com.oracle.cie.domain.script.ScriptExecutor.runGenerator(ScriptExecutor.java:3706)
at com.oracle.cie.domain.script.ScriptExecutor.writeDomain(ScriptExecutor.java:991)
at com.oracle.cie.domain.script.jython.WLScriptContext.writeDomain(WLScriptContext.java:1117)
... 29 more
Caused by: com.oracle.cie.domain.security.external.ConfigSecurityException: oracle.security.opss.tools.lifecycle.LifecycleException: oracle.security.jps.service.policystore.PolicyStoreException: javax.persistence.PersistenceException: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.4.2.v20130514-5956486): org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified
Error Code: 17002
at oracle.security.opss.tools.lifecycle.cie.OpssSecurityConfiguration.initializeSubsystem(OpssSecurityConfiguration.java:129)
at com.oracle.cie.domain.DomainGenerator.run(DomainGenerator.java:315)
at java.lang.Thread.run(Thread.java:744)
Caused by: oracle.security.opss.tools.lifecycle.LifecycleException: oracle.security.jps.service.policystore.PolicyStoreException: javax.persistence.PersistenceException: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.4.2.v20130514-5956486): org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified
Error Code: 17002
at oracle.security.opss.tools.lifecycle.OpssDomainConfigImpl.checkIfFarmExists(OpssDomainConfigImpl.java:708)
at oracle.security.opss.tools.lifecycle.OpssDomainConfigImpl.configureDBSecurityStore(OpssDomainConfigImpl.java:339)
at oracle.security.opss.tools.lifecycle.OpssDomainConfigImpl.initializeSubsystem(OpssDomainConfigImpl.java:166)
at oracle.security.opss.tools.lifecycle.cie.OpssSecurityConfiguration.initializeSubsystem(OpssSecurityConfiguration.java:126)
... 2 more
Caused by: oracle.security.jps.service.policystore.PolicyStoreException: javax.persistence.PersistenceException: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.4.2.v20130514-5956486): org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified
Error Code: 17002
at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.processJPAException(JpsDBDataManager.java:2088)
at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.init(JpsDBDataManager.java:955)
at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.beginTransaction(JpsDBDataManager.java:1459)
at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.beginTransaction(JpsDBDataManager.java:1455)
at oracle.security.jps.internal.common.rdbms.util.JpsDbBootstrapImpl.<init>(JpsDbBootstrapImpl.java:162)
at oracle.security.opss.tools.lifecycle.OpssDomainConfigImpl.checkIfFarmExists(OpssDomainConfigImpl.java:679)
... 5 more
Caused by: javax.persistence.PersistenceException: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.4.2.v20130514-5956486): org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified
Error Code: 17002
at org.eclipse.persistence.internal.jpa.EntityManagerSetupImpl.deploy(EntityManagerSetupImpl.java:614)
at org.eclipse.persistence.internal.jpa.EntityManagerFactoryDelegate.getDatabaseSession(EntityManagerFactoryDelegate.java:186)
at org.eclipse.persistence.internal.jpa.EntityManagerFactoryDelegate.createEntityManagerImpl(EntityManagerFactoryDelegate.java:278)
at org.eclipse.persistence.internal.jpa.EntityManagerFactoryImpl.createEntityManagerImpl(EntityManagerFactoryImpl.java:304)
at org.eclipse.persistence.internal.jpa.EntityManagerFactoryImpl.createEntityManager(EntityManagerFactoryImpl.java:282)
at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.getVersion(JpsDBDataManager.java:1027)
at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.getEMFAndSubject(JpsDBDataManager.java:1124)
at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.init(JpsDBDataManager.java:907)
... 9 more
Caused by: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.4.2.v20130514-5956486): org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified
Error Code: 17002
at org.eclipse.persistence.exceptions.DatabaseException.sqlException(DatabaseException.java:324)
at org.eclipse.persistence.exceptions.DatabaseException.sqlException(DatabaseException.java:319)
at org.eclipse.persistence.sessions.DefaultConnector.connect(DefaultConnector.java:138)
at org.eclipse.persistence.sessions.DatasourceLogin.connectToDatasource(DatasourceLogin.java:162)
at org.eclipse.persistence.internal.sessions.DatabaseSessionImpl.loginAndDetectDatasource(DatabaseSessionImpl.java:690)
at org.eclipse.persistence.internal.jpa.EntityManagerFactoryProvider.login(EntityManagerFactoryProvider.java:215)
at org.eclipse.persistence.internal.jpa.EntityManagerSetupImpl.deploy(EntityManagerSetupImpl.java:554)
... 16 more
Caused by: java.sql.SQLRecoverableException: IO Error: Unknown host specified
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:465)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:546)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:232)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:521)
at java.sql.DriverManager.getConnection(DriverManager.java:571)
at java.sql.DriverManager.getConnection(DriverManager.java:187)
at org.eclipse.persistence.sessions.DefaultConnector.connect(DefaultConnector.java:98)
... 20 more
Caused by: oracle.net.ns.NetException: Unknown host specified
at oracle.net.resolver.HostnameNamingAdapter.resolve(HostnameNamingAdapter.java:191)
at oracle.net.resolver.NameResolver.resolveName(NameResolver.java:133)
at oracle.net.resolver.AddrResolution.resolveAndExecute(AddrResolution.java:416)
at oracle.net.ns.NSProtocol.establishConnection(NSProtocol.java:687)
at oracle.net.ns.NSProtocol.connect(NSProtocol.java:247)
at oracle.jdbc.driver.T4CConnection.connect(T4CConnection.java:1109)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:316)
... 27 more
Any help/pointers/hints will be helpful
Thanks,
SantoshHi Micheal,
Thanks a Lot for your response.
We have checked the OS requirements :
System Itanium 11i (11.31) B.11.31.0803.318a Base Quality Pack Bundle for HP-UX 11i v3, March 2008+
Response:
======
We have the higher version installed for this quality pack.
QPKBASE B.11.31.1109.367a Base Quality Pack Bundle for HP-UX 11i v3, September 2011
2) Required Packages : HPDesktopDev (version B.11.31.01)
Response:
=======
This package is also installed.
X11MotifDevKit B.11.31.01 HP-UX Desktop Developer's Toolkit - X11, Motif, and Imake
3) Required Operating System Patches
PHKL_36248
PHKL_36249
PHSS_37202
PHSS_37501
PHCO_38050
PHSS_38139
Response:
========
We have the supersets for these patches installed. The installation logs also confirm these patches at the OS level.
Check Name:Patches
Check Description:This is a prerequisite condition to test whether the patches recommended for installing the product are available on the system.
Checking for PHKL_36248; found PHKL_36248. Passed
Checking for PHKL_36249; found PHKL_36249. Passed
Checking for PHSS_37202; found PHSS_37202. Passed
Checking for PHSS_37501; found PHSS_37501. Passed
Checking for PHCO_38050; found PHCO_38050. Passed
Checking for PHSS_38139; found PHSS_38139. Passed
Check complete. The overall result of this check is: Passed
Regards
Sumit Kapila -
Error Creating weblogic domain
Iam getting the following error when creating the weblogic 11g domain on windows. Please help me
Preparing...
Extracting Domain Contents...
Creating Domain Security Information...
Domain Creation Failed!
Domain Location: C:\bea_oracle\user_projects\domains\base_domain
Reason: null
Exception:
Traceback (innermost last):
File "<iostream>", line 1, in ?
File "C:\bea_oracle\wlserver_10.3\common\wlst\modules\jython-modules.jar\Lib/socket$py.class", line 21, in ?
File "C:\bea_oracle\wlserver_10.3\common\wlst\modules\jython-modules.jar\Lib/string$py.class", line 434, in ?
at java.io.File.<init>(File.java:222)
at java.lang.Package$1.run(Package.java:527)
at java.lang.Package.defineSystemPackage(Package.java:520)
at java.lang.Package.getSystemPackages(Package.java:511)
at java.lang.ClassLoader.getPackages(ClassLoader.java:1464)
at java.lang.ClassLoader.getPackages(ClassLoader.java:1462)
at java.lang.Package.getPackages(Package.java:281)
at org.python.core.JavaImportHelper.buildLoadedPackages(Unknown Source)
at org.python.core.JavaImportHelper.tryAddPackage(Unknown Source)
at org.python.core.imp.import_next(Unknown Source)
at org.python.core.imp.import_name(Unknown Source)
at org.python.core.imp.importName(Unknown Source)
at org.python.core.ImportFunction.load(Unknown Source)
at org.python.core.ImportFunction.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.core.__builtin__.__import__(Unknown Source)
at org.python.core.imp.importFromAs(Unknown Source)
at org.python.core.imp.importFrom(Unknown Source)
at string$py.f$0(C:\wlst\jython_2.2.1\Lib\string.py:434)
at string$py.call_function(C:\wlst\jython_2.2.1\Lib\string.py)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyCode.call(Unknown Source)
at org.python.core.imp.createFromCode(Unknown Source)
at org.python.core.imp.createFromPyClass(Unknown Source)
at org.python.core.ZipFileImporter$ZipFileLoader.load_module(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
java.lang.NullPointerException: java.lang.NullPointerExceptionHello,
I have been digging a little...
The socket jython class makes a import string+ al line 21 and the string jython class makes a from strop import maketrans, lowercase, uppercase, whitespace+ at line 434.
If you look at the code of string.py seems that a failure of finding the strop module is controlled *¿!?*
In fact the strop.py and strop$py.class aren't inside the jython-modules.jar but I don't know how is that a null exception is trown when seems that except ImportError:+ takes care of cach it.
# Try importing optional built-in module "strop" -- if it exists,
# it redefines some string operations that are 100-1000 times faster.
# It also defines values for whitespace, lowercase and uppercase
# that match <ctype.h>'s definitions.
try:
from strop import maketrans, lowercase, uppercase, whitespace
letters = lowercase + uppercase
except ImportError:
pass # Use the original versionsPerhaps mr Satya Ghattu can help you in this issue.
Best reggards, -
OBIEE 11.1.1.5 install Hangs at Domain Creation.
Hi There,
I tried installing OBIEE 11.1.1.5 on Windows 7, 64 bit several times and its very disappointing it hangs at the domain creation. Tried everything the previous posts suggest, but no success,
1. Intstalled Oracle11g.
2. Installed loop back adopter.
2. RCU to create schemas.
3. Installed OBIEE 11.1.1.5
It did not work and finally, some other forums suggested to install in 2 steps, software Install Only and then configuration. For this I performed following additional steps
1. Installing Weblogic server, starting it to see if its working.
2. Changed the Java path to be under C: \ so it doesn't include spaces in the file path.
3. Software install only.
4. Config.cmd under the oracle directory.
Can somebody please help me, have been trying for few weeks now, and feel very very unaccomplished.
The last few lines of log file shows
Creating a new AdminServer Object ...
AdminServer port is 7002
Starting the domain ...
LOADING DLL : C:\Oracle\Middleware\Oracle_BI\install\config\\StartUtil64.dll
DEBUG : Loading DLL : C:\Oracle\Middleware\Oracle_BI\install\config\\StartUtil64.dll
DEBUG : Loaded DLL : C:\Oracle\Middleware\Oracle_BI\install\config\\StartUtil64.dll
After this it hangs and never comes back, appreciate any guidance please,
Thanks a lot!!!!!!!!!!Hi,
As you say, the OBIEE installation is hanging at the DOMAIN Creation, I suspect the JDK installation location here. I think the web logic domain creation tool just cannot run when the JDK is installed in say c:\Program Files\JAVA etc (any directory with a space). I think this is a bug.
Can you please let me know, if have JDK installed somewhere like this?
In this case, can you please rollback your installation and install JDK in say C:\JAVA and let us know if this works.
You might want to run the weblogic domain creation wizard through <wl_home>\common\bin\config.cmd to identify if its the same cause.
Hope this helps.
Thank you,
Dhar -
Creation of Weblogic Domain in console mode not working
Hi All,
I've installed the Middleware home with ADF Runtime installer (Installer was 12.1.2.0.0). Now, I'm trying to create and configure a domain based on the JRF Template. I'm executing the following command from Putty
Step1. Navigate to MW_HOME/wlserver/common/bin
Step2. execute "./config.sh -mode=console"
Its throwing the following error :
2014-07-21 17:03:41,643 WARNING [WizardController] com.oracle.cie.wizard.internal.engine.WizardControllerEngine - Duplicate action cause encountered: java.awt.HeadlessException:
No X11 DISPLAY variable was set, but this program performed an operation which requires it.
2014-07-21 17:03:41,643 SEVERE [WizardController] com.oracle.cie.wizard.internal.engine.WizardControllerEngine - Wizard error cause
java.awt.HeadlessException:
No X11 DISPLAY variable was set, but this program performed an operation which requires it.
at java.awt.GraphicsEnvironment.checkHeadless(GraphicsEnvironment.java:207)
at java.awt.Frame.<init>(Frame.java:420)
at java.awt.Frame.<init>(Frame.java:385)
at javax.swing.SwingUtilities$SharedOwnerFrame.<init>(SwingUtilities.java:1757)
at javax.swing.SwingUtilities.getSharedOwnerFrame(SwingUtilities.java:1832)
at javax.swing.JOptionPane.getRootFrame(JOptionPane.java:1697)
at javax.swing.JOptionPane.showOptionDialog(JOptionPane.java:863)
at javax.swing.JOptionPane.showConfirmDialog(JOptionPane.java:796)
at javax.swing.JOptionPane.showConfirmDialog(JOptionPane.java:758)
at com.oracle.cie.wizard.internal.cont.GUIContext.handleFatalErrorMessage(GUIContext.java:1141)
at com.oracle.cie.wizard.internal.cont.GUITaskContainer$MethodRunner.run(GUITaskContainer.java:188)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:302)
at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:733)
at java.awt.EventQueue.access$200(EventQueue.java:103)
at java.awt.EventQueue$3.run(EventQueue.java:694)
at java.awt.EventQueue$3.run(EventQueue.java:692)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.ProtectionDomain$1.doIntersectionPrivilege(ProtectionDomain.java:76)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:703)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:150)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:146)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:138)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:91)
2014-07-21 17:03:41,643 WARNING [WizardController] com.oracle.cie.wizard.internal.engine.WizardControllerEngine - Given state 'ERROR' does not follow current 'ERROR'
This vaguely means that its trying to open a GUI wizard, which is not what I intended to do. The argument -mode=console should run the installer in console mode, but its trying to launch it in GUI mode.
I searched online, but I have not found anything useful on this issue yet.
Am I missing something? Has anyone faced this problem before.
Any thoughts on this would be helpful !!
Thanks,
Shiva Shankar B NWeblogic 12C (12.1.2 to be precise), currently does not support console mode Domain creation. It supports only GUI mode and Silent mode.
Possible solution to create a 12.1.2 Weblogic domain fully qualified enough to deploy ADF Applications :
1. Install Xming, and enable X11 forwarding on Putty
2. Silent Mode installation: The Configuration wizard. ./config.sh -mode=silent -silent_script=xyz . Yes, it needs a silent script, not silent.xml. I did not try this way and instead resorted to WLST. Still there are not enough blogs that clearly tell you how to install domain based on JRF template. I stumbled upon a similar OTN forum post.
Here is the bunch of WLST commands if anyone is interested
#=======================================================================================
# Open a domain template.
#=======================================================================================
readTemplate("/u01/app/mw/Oracle_Home/wlserver/common/templates/wls/wls.jar")
#=======================================================================================
# Update the domain to enable the WebLogic Server domain with JRF and EM.
#=======================================================================================
addTemplate('/u01/app/mw/Oracle_Home/oracle_common/common/templates/wls/oracle.jrf_template_12.1.2.jar')
addTemplate('/u01/app/mw/Oracle_Home/em/common/templates/wls/oracle.em_wls_template_12.1.2.jar')
#=======================================================================================
# Configure the Administration Server and SSL port.
# To enable access by both local and remote processes, you should not set the
# listen address for the server instance (that is, it should be left blank or not set).
# In this case, the server instance will determine the address of the machine and
# listen on it.
#=======================================================================================
cd('Servers/AdminServer')
set('ListenAddress','')
set('ListenPort', 7001)
create('AdminServer','SSL')
cd('SSL/AdminServer')
set('Enabled', 'True')
set('ListenPort', 7002)
#=======================================================================================
# Define the user password for weblogic.
#=======================================================================================
cd('/')
cd('Security/base_domain/User/weblogic')
# Please set password here before using this script, e.g. cmo.setPassword('value')
cmo.setPassword('password')
# Create and configure a JDBC Data Source, and sets the JDBC user. Provide the Schema Credentials of the Service table
# Get RCU Configuration using RCU service table (STB) schema credentials
cd('/')
cd('JDBCSystemResource/LocalSvcTblDataSource/JdbcResource/LocalSvcTblDataSource')
cd('JDBCDriverParams/NO_NAME_0')
set('DriverName','oracle.jdbc.OracleDriver')
set('URL','jdbc:oracle:thin:@XX.XX.XX.XX:1521/xe.yourdomain.com')
set('PasswordEncrypted', 'schemaPassword')
set('UseXADataSourceInterface', 'false')
cd('Properties/NO_NAME_0')
cd('Property/user')
cmo.setValue('DEV_STB')
getDatabaseDefaults()
#=======================================================================================
# Write the domain and close the domain template.
#=======================================================================================
setOption('OverwriteDomain', 'true')
writeDomain('/u01/data/user_projects/domains/your_domain')
closeTemplate()
#=======================================================================================
# Exit WLST.
#=======================================================================================
exit()
Hoping to write a blog post soon..
Thanks,
Shiva Shankar B N -
OBIEE 11g installing in Linux. domain creation error
Hi,
OBIEE 11g installing in Linux server now. domain creation is in progress for about an hour and in log I can see below error.
Creating a new AdminServer Object ...
AdminServer port is 7001
Starting the domain ...
java.lang.OutOfMemoryError: PermGen space
java.lang.OutOfMemoryError: PermGen space
java.lang.OutOfMemoryError: PermGen space
domain creation is still running and looks like it is struck to start domain no idea how to solve the issue. waiting to see whether domain creation successful.
Please let me know how to fix this issue.
Thanks
Jay.Hi,
Have you try to increase MaxPermSize, it may occure memory issue.
change the Middleware/ORACLE_BI1/oui/oraparam.ini and fine it like below
JRE_MEMORY_OPTIONS=" -mx512m -XX:MaxPermSize=512m" then try to change it
JRE_MEMORY_OPTIONS=" -mx2048m -XX:MaxPermSize=2048m"
(i.e:It will increase the numbers for allocating more memory) then save it and then try to run config.bat (software only/enterprise) method and configure it.
Thanks
Deva
Maybe you are looking for
-
I followed all of these instructions, but still iCloud Calendar will not sync to Outlook Calendar. Calendar entries will sync from Outlook to iCloud, but not vice versa. What do I do now?.
-
I made a project in iDVD, burned it and now it doesn't show up (mount) on my desktop when I try to view it on my iBook. But it DOES play in a regular DVD player. Anyone have an idea why? Thanks in advance. Randy
-
How do I turn off Facebook birthdays
How do i remove Facebook's birthday notifications? I want to keep Facebook calendar integration, but I don't want the daily birthday notifications. Is there a way to turn them off using Facebook, iCloud, or any other way?
-
Describe the process flow in MM
hi i m new to MM, can u pls describe the process flow in MM thanks
-
Hello, I am having printing issues. My Xerox Phaser 6500DN is supposed to be great, but I can't get it to print nearly quick enough. At the quality that I need, it will only print one page every 4.5 minutes after sitting there saying "processing."