WebLogic domain spread across two machines

Hi All,
I have a weblogic domain that spreads across two machines. First machine hosts the Admin server, (BAM , SOA) managed servers and the second machine hosts the (APPs and FIN) managed servers. As you can see the managed servers hosts different applications and not related with clustering. I want to know in such a setup do we need to have separate weblogic installation on both first and second machines or just have WebLogic installation on the first machine and have the second machine reference the first's WL installation.
What's the best practice.
Regards

I mean for a domain spread over two machines, I need to have weblogic installation on both machines and not just the one running admin server. I read somewhere WebLogic installations have 1 to N relation with domains. Seems like for a domain spread across two machines, two WL installations and two licences. Am I right?

Similar Messages

How can one share iTunes Library across two machines at the same time?

**I have setup 1 of 2 machines to host all the songs in my iTunes library. I then went to machine 2 of 2 and held down option key on start up of iTUnes, changed the location of the liobrary on machine 2 to a shared folder on machine 1.**
**This works awesome and I can use itunes on each of the machines 1 and 2 with no duplicate library in my home.**
**Problem: I can only run one machine at a time. I can not run itunes on both machines at the same time. The error message from machine 2 is ITUNES library is locked and cant write to the folder. iTunes works correct if I QUIT iTunes on machine 1.**
**Can iTunes run at the same time on 2 machines and access the same library?**
*Thank You Troy*

Troy Yoho wrote:
Can iTunes run at the same time on 2 machines and access the same library?
in a way, yes.
set up _*Home Sharing*_ on both machines.
JGG

Sharing a monthly subscription across two machines

I have subscribed to Acrobat Standard XI on a monthly account on a Laptop and all is good. But I now want to use it on a desktop as well. Is this possible without without paying again?

Yes. You can activate the software on a maximum of two computers at the same time.

Sync iTunes library across two machine

i have a desktop (at home) and a laptop (work and travel). is it possible to have the libraries synced without having to purchase each song twice?

this is actually something i do regularly. i have a laptop and a desktop that both have the same purchased content from iTunes. the way to do it is to use the same iTunes login account on both computers. the tricky part is getting the files on both computers (last i checked anyway) but its not too hard to do it once you establish a method for doing so.
would be nice if you could purchase something on one computer and use the "check for purchases" feature on the other computer to download your purchases on multiple computers. but as far as i know, it doesnt work that way.
as long as iTunes is setup to keep the media folder organized, you could simply purchase an item on one computer, and share out your itunes folder on your local network. connect to the shared folder from the other computer, and import the media you just purchased into itunes.
as far as i know this is the only way to have the same purchased content on multiple computers. again, the key is using the same itunes account on both computers to do this.

Creating two soa-infra managed servers on one Weblogic domain

I would like one weblogic domain that includes two soa-infra each pointing to its own datastore.
I would like to know if this is possible? If so, can someone point me to any documentation on how to accomplish this?
Thank you,
David

No, still waiting for some kind of answer.

Dangers of Working on Two Machines?

Are there any inherent problems in maintaining a copy of my iWeb "domain" file on two machines? Do they both get updated every time i open iWeb?
Must the "second" copy be saved in my home folder's Library/Application/Support/iWeb/ folder ??
All is working well ... I just would like to update my iWeb site from my mini ....

Are there any inherent problems in maintaining a copy of my iWeb "domain" file on two machines? Do they both get updated every time i open iWeb?
No, they don't. They are on different computers. You have to devise a strategy to use the same file on both computers.
In the old days I used a floppy to transport a file. Now I use a USB Stick. You can also put the file on the server and work from there. Just double-click to open it in iWeb.
Practice.

Regarding install of obiee11g on two machines Should be part of same domain

Hi Experts,
Actually we need a requirement like this i.e
I want to install obiee 11g on two machines
Should be part of same domain
But want to run only one service on one host
Like bi server on one host
And presentation on another host
Can any one please help on this
Thanks in Advance,
Siva Shankar

Hi,
you can get all the info the installation and configuration guide.
Here´s the link:
http://download.oracle.com/docs/cd/E10415_01/doc/bi.1013/b31765.pdf
http://gerardnico.com/wiki/dat/obiee/installation_11.1 -- Step by step install obiee plese refer this link .
Weblogin install steps._
http://www.togotutor.com/weblogic/windows-weblogic-10-3-4-installation.php -- please refer the below link step by step with screen shot.
Cluster steup:_
You have to modify below config files OBIEE 11g clustering setup.
1. Nqsconfig
2.Nqsclusterconfig
3.odbc.ini
4.web.xml
5.instanceconfig.xml
Please refer the below links.
http://www.rittmanmead.com/2010/07/obiee-11gr1-scaleout-clustering-and-high-availability/
Please send me your mail id I will provide obiee installation link on my blog -- in this blog step by step is ther how to install obiee.
Hope this help's
Thanks
satya

Add cluster nodes from multiple machines to WebLogic domain in OEM 10.2.0.5

Hello,
I want to monitor a WebLogic domain in Oracle Enterprise Manager 10.2.0.5 with the following layout:
- Admin server on machine 1
- managed server, cluster node a on machine 2
- managed server, cluster node b on machine 3
How can I do this?
When I go to "Add Weblogic Domain", I can enter the admin adress (machine 1) and tick the box to say that there is an agent running on another host (where I specify machine 2). However I do not see a possibility to discover managed servers from machine 3.
Does anyone know how to do this?
Thanks,
Nadja

LSNRCTL> status
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.1.0.6.0 - Production
Start Date 28-JAN-2010 00:36:10
Uptime 0 days 17 hr. 11 min. 52 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /oracle/app/oracle/product/11.1.0/db/network/admin/listener.ora
Listener Log File /oracle/app/oracle/diag/tnslsnr/corp1052/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=corp1052)(PORT=1521)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+ASM2", status READY, has 1 handler(s) for this service...
Service "+ASM_XPT" has 1 instance(s).
Instance "+ASM2", status READY, has 1 handler(s) for this service...
Service "dex.example.com" has 2 instance(s).
Instance "dex1", status READY, has 1 handler(s) for this service...
Instance "dex2", status READY, has 2 handler(s) for this service...
Service "dexXDB.example.com" has 2 instance(s).
Instance "dex1", status READY, has 1 handler(s) for this service...
Instance "dex2", status READY, has 1 handler(s) for this service...
Service "dex_XPT.example.com" has 2 instance(s).
Instance "dex1", status READY, has 1 handler(s) for this service...
Instance "dex2", status READY, has 2 handler(s) for this service...
The command completed successfully
The output of SQLPlus:
[oracle@dbhost: db]$ bin/sqlplus dex@DEX
SQL*Plus: Release 11.1.0.6.0 - Production on Thu Jan 28 18:40:11 2010
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Enter password:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - 64bit Production
With the Partitioning, Real Application Clusters, OLAP, Data Mining
and Real Application Testing options

Spread image across two pages and print the full pages

Hi there,
Im having a bit of trouble with InDesign CS3.
I want to place an image across two facing pages but can't seem to make it go further than one page.
Also I want to figure out how to print full pages, currently I am only able to print what is contained in the pruple bounding box on the page, any part of the image outwith this is cropped off leaving a white border on the page - this isn't an issue for all but my title page and this two page image I require.
Any tips.
Cheers
malc

I don't understand the inability to place an image that spans two pages (not that I necessarily think this is a good thing to do under most circumstances, but that's a different discussion). Can you see both pages in the same spread? How about providing some details about what you are doing, and maybe a screen shot showing what's happening. Perhaps you're using a frame on the master page?
The second part sounds like a printer issue, but that's hard to know without knowing what your "purple" guides (presumably the page margins) are set to. Most printers are not able to print to the edge of the sheet of paper, regardless of what might be included on the page, so you get a white border that will vary in size depending on the printer model. Generally speaking, to print a bleed you must extend the items beyond the page edge (to insure there is no white edge left fom misaligment in the cutter) and print on a larger sheet, then trim to finished size.

Double spreads - can I place an image across two pages in facing page mode?

Hi, I'm just getting into Pages to be able to create custom wedding album designs easily (I use Aperture). I'd really like to be able to place an image across two facing pages and I noticed that there is a 'facing page' mode, but this looks like it only applies to the view.
I tried laying an image across two 10x13 inch pages, but of course this doesn't work. I also tried to insert a 10x26 inch page as an alternative so that I can treat it as a double page. However, when I try to do this, every page resets to that size.
Is there a way of creating two page sizes (one normal, the other double width) in the same document so I can do this, or is there a way of spreading an image across two facing pages?
Thanks

brown,
You've bumped into one of Pages' limitations -- it won't allow one image across a spread. I've heard rumors of people kludging it by cutting the image in half, and putting each half on the spread pages.
-Dennis

How do you get an image to spread horizontally across two pages?

My son needs to complete a project using DK style, where images spread across facing pages. Can this be accomplished with Pages? If so, please give me a step-by-step procedure. If this cannot be done with Pages, what reasonably-priced program can do this? Thank you for your time.

Swift Publisher can do this.
In Pages split the image into a left half and a right half, positioning each half with the Metric inspector to appear on the left and right pages.
Peter

Two application deployed on same weblogic domain

Hi
Can OSSO (Oracle Single Sign On) and OAM (Oracle Access manager) both be deployed on the same server in the same Weblogic Domain? My hunt is it is possible as long as the port nbumber is different. Any feedback are welcome.
thanks

AFAIK OAM cannot be deployed on Weblogic till next gen release which is quite far right now. So there's no point of asking if both can be deployed on the same server since OAM cannot be deployed on weblogic at all.

How to run 2 weblogic instance in the same machine

is it possible to run 2 weblogic instance in the same machine ?
I have created 2 domains ...domain-1 and domain-2 in my hard disk and both of them have startWeblogic.cmd in them..
but i cant run them simultaneously though individually they run.
they differ by HTTP port and Debug port but still they dont run simultaneously
can you please comment ?

yea...i thought about it .
but as both of them are same application and they are using the same DB connection pool , JMS queue ....i just dont want to mix all these.
so i have created two seperate domian . and i run them individually and they work fine.
However , they are having different ports though .
But when i run the second one while the first one is running ....the second one does not starts up
here is the error when i click on startsWeblogic.cmd when the other is already running.
java version "1.4.2_08"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_08-b03)
BEA WebLogic JRockit(TM) 1.4.2_08 JVM R24.5.0-61 (build ari-49095-20050826-1856-win-ia32, Native Threads, GC strategy: pa
Starting WLS with line:
d:\bea\JROCKI~1\bin\java -jrockit -Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=8453,server=y,suspend=n -Djava.
=== Debugging ===
This window is necessary for debugging code using WebLogic Workshop
ERROR: Proxy already running...
weblogic.debugging.comm.TransportException
at weblogic.debugging.comm.ServerConnectInfo.createTransport()Lweblogic/debugging/comm/CommTransport;(ServerConne
at weblogic.debugging.engine.ProxyThread.run()V(ProxyThread.java:77)
at java.lang.Thread.run()V(Unknown Source)
at java.lang.Thread.startThreadFromVM(Ljava/lang/Thread;)V(Unknown Source)
Caused by: java.net.BindException: Address in use
at jrockit.net.SocketNativeIO.bind(ILjava/net/InetAddress;I)I(Unknown Source)
at jrockit.net.SocketNativeIO.bind(Ljava/io/FileDescriptor;Ljava/net/InetAddress;I)I(Unknown Source)
at java.net.AbstractSocketImpl.bind(Ljava/net/InetAddress;I)V(Unknown Source)
at java.net.PlainSocketImpl.bind(Ljava/net/InetAddress;I)V(Unknown Source)
at java.net.ServerSocket.bind(Ljava/net/SocketAddress;I)V(ServerSocket.java:318)
at java.net.ServerSocket.<init>(IILjava/net/InetAddress;)V(ServerSocket.java:185)
at java.net.ServerSocket.<init>(I)V(ServerSocket.java:97)
at weblogic.debugging.comm.ServerConnectInfo.createTransport()Lweblogic/debugging/comm/CommTransport;(ServerConne
... 3 more
Could not bind to Weblogic server (Error attaching to Weblogic Server.).
Message was edited by:
Unknown_Citizen

Run 2 Weblogic domains from the same console

Hi
I have a question.
Currently now i have 2 domains, each domain was installed with Admin server and managed servers.
I have 1 nodemanager.
During the installation of the domains i had to provide different ports for the weblogic instances, so i have 2 different consoles to access the WL to manage domains.
The question:
Is there any way to handle and admin 2 different domains (which running on the same machine) from same WL console ?
Thanks

We do not have a way to administer two weblogic domains from same console.
But,I think you can install Oracle Enterprise Manager to manage your middleware infrastructure.

Weblogic Domain overwriting a different Domains config location

Okay so here is the issue. I have two Weblogic Domains, lets say Domain1 and Domain2. For some reason recently Domain2 has decided that it is going to write to bea/domains/Domain1. This includes the config.xml, /jdbc and /nodemanager. Now I have verified that the startWeblogic.sh is setting the correct Domain2 locations however could this possibly be something with the Node Manager that is over riding these properties? Thanks for the help.
My current machine is a Sun Solaris 10 box running Weblogic 10g.

hi,
the binaries available for download are all packaged with 32bit JVM. Please have a look at the link below
WebLogic Server 12c (12.1.1), WebLogic Server 11g (10.3.6) and Previous Releases
It also has binaries for linux available. I am quoting from the site verbatim for your reference:
The following provides links to WebLogic Server 12.1.1 installers with 32-bit JVMs for Windows and
Linux, the generic installer that can be used on any supported platform, and the zip distribution. The
generic installer and the zip distribution do not include a JVM/JDK. For instructions on using the
generic installer, see this document.
In case you want to use your own latest version of JDK which can be a 32/64 bit version, you need to use the generic installer.
The error which you are getting is due to permissions. Make sure you have a dedicated user for installing weblogic and the necessary permissions are granted to the user(linux) to the installation directories. May be the script is trying to install java at a particular location on your machine and failing. Hence the above error is displayed.
Please have a look at the docs, you will find steps for weblogic installation on linux.
Thanks,
Souvik.

WebLogic domain spread across two machines

Similar Messages

Maybe you are looking for