Weblogic- Fusion Middleware 11g domain JPS security issue.

Hello All,
I'm not very familar with the extensive Security "JPS" managembnt inside weblogic including fusion middleware and the domain security policy.
I just wanted to remove the below line from my "Reports Engine" configuration and now I'm stuck with the further below error constantly.
As far as I can tell the Domain security provide is configure to OID (which I don't even use). All teh files .sso, system_jazn... are all available and have never been deleted or changed.
Fusion Report Engine config (want to remove the security )
=======================================
<engine minEngine="3" maxIdle="30" maxEngine="8" id="rwEng" engLife="50" defaultEnvId="GICQA" class="oracle.reports.engine.EngineImpl"/>
    
    JPS security errors
============
[2012-08-20T13:49:57.567-04:00] [reports] [TRACE:32] [REP-56025] [oracle.reports.server] [tid: 10] [ecid: 0000J_59wD2Fc5WFLzINOA1GCbZ5000001,0] [SRC_CLASS: oracle.reports.utility.RWLogger] [SRC_METHOD: writeln] RWServer:startServer Reports Server is starting up.
[2012-08-20T13:49:58.098-04:00] [reports] [WARNING] [] [oracle.reports.server] [tid: 10] [ecid: 0000J_59wD2Fc5WFLzINOA1GCbZ5000001,0] Multicast:init java.net.SocketException: Unrecognized Windows Sockets error: 0: no Inet4Address associated with interface
[2012-08-20T13:49:58.098-04:00] [reports] [WARNING] [] [oracle.reports.server] [tid: 10] [ecid: 0000J_59wD2Fc5WFLzINOA1GCbZ5000001,0] Multicast:init java.net.SocketException: Unrecognized Windows Sockets error: 0: no Inet4Address associated with interface
[2012-08-20T13:49:58.113-04:00] [reports] [NOTIFICATION:16] [REP-65000] [oracle.reports.server] [tid: 10] [ecid: 0000J_59wD2Fc5WFLzINOA1GCbZ5000001,0] Multicast:init Communication channel is initialized.
[2012-08-20T13:49:58.113-04:00] [reports] [TRACE:16] [] [oracle.reports.server] [tid: 10] [ecid: 0000J_59wD2Fc5WFLzINOA1GCbZ5000001,0] [SRC_CLASS: oracle.reports.utility.RWLogger] [SRC_METHOD: writeln] Multicast:registerReceiver Packet handler registered
[2012-08-20T13:49:58.113-04:00] [reports] [NOTIFICATION:16] [] [oracle.reports.server] [tid: 10] [ecid: 0000J_59wD2Fc5WFLzINOA1GCbZ5000001,0] ServerPacketHandler:start ServerPacketHandler started successfully
[2012-08-20T13:50:00.219-04:00] [reports] [NOTIFICATION:16] [] [oracle.reports.server] [tid: 10] [ecid: 0000J_59wD2Fc5WFLzINOA1GCbZ5000001,0] SecurityHelper:start Security system rwJaznSec successfully started.
[2012-08-20T13:50:00.531-04:00] [reports] [TRACE:16] [] [oracle.reports.server] [tid: 10] [ecid: 0000J_59wD2Fc5WFLzINOA1GCbZ5000001,0] [SRC_CLASS: oracle.reports.utility.RWLogger] [SRC_METHOD: writeln] ReportsCacheHandler:init JOC is initialized
[2012-08-20T13:50:00.578-04:00] [reports] [TRACE:16] [] [oracle.reports.server] [tid: 10] [ecid: 0000J_59wD2Fc5WFLzINOA1GCbZ5000001,0] [SRC_CLASS: oracle.reports.utility.RWLogger] [SRC_METHOD: writeln] JobManager:start Job id sequence = null
[2012-08-20T13:50:00.594-04:00] [reports] [NOTIFICATION] [] [oracle.reports.server] [tid: 10] [ecid: 0000J_59wD2Fc5WFLzINOA1GCbZ5000001,0] Failed initializing JPS D:\Oracle\Middleware\asinst_1\config\ReportsServerComponent\RptSvr_GICPHXAP11_asinst_1\rwserver.conforacle.security.jps.service.credstore.CredStoreException: Could not find the key specified
[2012-08-20T13:50:00.594-04:00] [reports] [INCIDENT_ERROR] [REP-50125] [oracle.reports.server] [tid: 10] [ecid: 0000J_59wD2Fc5WFLzINOA1GCbZ5000001,0] REP-50125 : An internal exception occurred: oracle.security.jps.service.credstore.CredStoreException: Could not find the key specified. [[
oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
     at oracle.reports.utility.Utility.newRWException(Utility.java:1053)
     at oracle.reports.utility.Utility.newRWException(Utility.java:1066)
     at oracle.reports.server.ServerConfig.getValueFromCSF(ServerConfig.java:1354)
     at oracle.reports.server.ServerConfig.getElementProperties(ServerConfig.java:1294)
     at oracle.reports.server.ServerConfig.getElementProperties(ServerConfig.java:1038)
     at oracle.reports.server.JobStoreDB.start(JobStoreDB.java:77)
     at oracle.reports.server.RWServer.startServer(RWServer.java:1038)
     at oracle.reports.server.RWServer.jniMain(RWServer.java:305)
]]Can anybody assist.
Thanks in advance
Jan S.

Hello Kalyan,
I looked at the bug you mentioned and this seem to be related to JSP files as opposed to JPS security. I've searche metalink and may have found some similar and possibly the exact error.
*Error PKI-02002: Unable to open the wallet. Check password When Starting a Reports Server [ID 1316651.1]*
Thanks
Jan S.

Similar Messages

Installing OAM 10.1.4.3 with Oracle Fusion Middleware 11g

Hi All,
I am installing OAM 10.1.4.3 with Oracle Fusion Middleware 11g. The installation issue in creating an OID "start Oracle Internet Directory" was resolved. However, when I am installing OAM identity server it asked for the Configuration DN and Searchbase. I tried to enter dc="myCompany" as Config DN and Searchbase it did not accept. I was really stuck in my installation.
How will I check my searchbase and configdn in Fusion Middleware 11g?
Your help is very much appreciated. I need this ASAP.
thanks.

The product configuration DN is the node into which the product meta-data will be stored.
If your root suffix is dc=abc,dc=com it is considered best practice to define another node such as ou=apps.
The product will create o=oblix under the configuration DN.
I mention this in many of my responses on this forum: If you are trying to get going with OAM without training or professional help, you will find it a tough road. Get some training or bring in someone who knows the product.
Mark

Fusion Middleware 11g Weblogic, forms and Reports in Solaris 11 zone

Hi,
Any one Installed Fusion Middleware 11g Weblogic, forms and Reports on Solaris 11 zone ??
So Pls Let me know Weblogic and Fusion Middleware 11g versions which are working
I try
Weblogic 10.3.3 Installed 64 Bit Went OK
Fusion Middleware 11g 11.1.1.2.0 Errors While Relink few items like frmbldr etc
Then Fusion Middleware 11g Patchset5 11.1.1.6 Still Same Errors Relink few items like frmbldr etc
Then Cconfig.sh failed at create domain
Regards

Hi Deepak,
Just config.sh or config.cmd file and try to change the JDK with in and try to configure new domain from there.
Regards,
Kal

Weblogic - Fusion Middleware Cluster - Clarification - 11g

Hello All,
I've checked the forum and would need just a little clarification regarding weblogic cluster & fusion Middleware + Load Balancing.
My current Setup is:
==============
1 APP Server: Runs Fusion Middleware 11g Forms and Reports + Weblogic + OHS (windows 2008R2)
1 DB Server: Standalone database 11gR2 installation (windows 2008R2)
I've been asked to add a new app server and setup load balancing between the two app servers in order to split the incoming forms & reports requests.
What do I do? Do I install the new app server like the first one and just add it to an existing domain(clustering)? Is there a difference between fusion middleware clustering and weblogic clustering (as in database RAC - the whole idea being failover 24/7 no single point of failure?)
I would appreciate any assistance, and need not great detail, just need to make sense of the whole thing.
I'm already on with the following document: [http://docs.oracle.com/cd/E21764_01/web.1111/e13709/toc.htm]
Thanks in advance
Jan S.

Hi Jan
You are almost there. I would like to clarify some points for you.
1. You already have WLS + Forms/Reports and of course Backend RCU Database that has all the meta data for Forms/Reports. This RCU database is on single server Oracle database.
I've been asked to add a new app server and setup load balancing between the two app servers in order to split the incoming forms & reports requests.
2. The first question for above requirement is, do you need the new Server on the same Existing physical box or a different remote physical box. If on the same physical box (which I doubt), then there is NO need to install any new software like WLS, Forms/Reports etc. All you do is create a new Managed Server and add it to your existing Domain. NOW, do you currently have a Clustered Domain. If you, all you do is add this new server to that cluster. If not, then you need to add a New cluster and add your old and this NEW managed server to that Cluster. If your existing domain is only single server and is very recent, I would prefer create a brand new Cluster domain with Different Port numbers (you can change port numbers anytime later also). Then add/create one or two managed servers.
3. If you are give a new physical box for this new managed server, then YES, you do need to install exactly SAME version of Weblogic Server and same version of Forms/Reports server on this new machine. Then create a Cluster Domain with 2 managed servers. One managed server on first box where you will have Admin Server + Managed Server 1. Then run pack command. Go to other machine. Run unpack command to create second Managed Server. Now you got 2 managed servers in a Single Clustered Domain.
4. Now comes the Load Balancing Part. Never ever expose the individual managed server host and port and WebApp urls for any Clustered Domain. Instead install Apache Http Web App Server which I guess is same as Oracle Http Server. Oracle renamed it (there is no need for this, but it may be company policy). Anyhow all you do is, just install Apache Web Server. Copy some .dll (.so on linux) files to this apache installation. Then update httpd.conf file or weblogic.conf file with details of clustered weblogic domain managed servers host, port, url patterns etc.
5. All the External Requests will now go to Apache Web Server like http://apachehost:apacheport/xxxUrl. This Apache will take care of LOAD Balancing, Failover etc and based on input url pattern will redirect requests to back end cluster of weblogic managed servers.
6. The backend RCU database that has Metadata for Forms/Reports NEED NOT be Clustered. If you really have extremely heavy data, then you can have Oracle RAC database. Have multiple DB Nodes in RAC. For each Node, create a DataSource in Weblogic conolse and finally one master Multi Data Soiurce that uses all these single Datasources. But very rarely you really need RAC or clustered database for RCU. So for now, just go with single non-clustered Database that has RCU Schemas.
In conclusion, even though you have Forms/Reports, just follow the standard normal Weblogic Clustered domain Architecture for your requirement. All clustering is at application server level and nothing to do with any Oracles softwares like SOA/BPM, Forms/Report, BI etc etc.
Thanks
Ravi Jegga

Cannot start Enterprise Manager for Fusion Middleware 11g

Dear all,
Because I want to install Oracle EGRCM v8.0.1 in Linux x86_64, so I installed Oracle Weblogic 11gR1 and SOA Suite 11g first.
After installation successfully, I created a base_domain as default, and can start weblogic administration server ( http://localhost:7001/console ) successfully.
Now I want to use Enterprise Manager for Fusion Middleware 11g. Per "*Oracle® Fusion Middleware Administrator's Guide 11g Release 1 (11.1.1)*", the EM should be available now and the access URL should be http://localhost:7001/em . But when I try to access it, the following error returned:
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
+10.4.5 404 Not Found+
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
So I try to start with emctl in *$MW_HOME/oracle_common/bin/*, the error is as following:
+./emctl: line 387 /d02/Middleware/oracle_common/perl/bin/perl: No such file or directory+.
I check the path and find out that no directory named "perl" under */d02/Middleware/oracle_common*. So I try to copy the necessary dir from the dir installed Oracle Database 11g ( *$ORACLE_HOME* ), but it returns following error:
OC4J Configuration issue. /d02/Middleware/oracle_common/sysman/j2ee not found.
I try to copy necessary dir from *$ORACLE_HOME* but still cannot start EM.
Please give some advise about how I can start EM for Fusion Middleware 11g, any idea is appreciate!
Best Regards,
Kenny Wang

Ravi Jegga wrote:
Hi Kenny
See this post of mine: Re: Fusion Middleware Console
For any SOA Domain, unless you have Enterprise Manager Facet enabled (during domain creation process or adding later on by extending it), you will not be able to access the EM Console. For quick testing, open config.xml file for your domain and check the modules specially em module as shown below. It should be there. This is for one of my SOA Cluster Domains with SOA on top of WLS 10.3.2
<app-deployment>
<name>em</name>
<target>AdminServer</target>
<module-type>ear</module-type>
<source-path>C:\beawls1032\user_projects\applications\soaDomainCluster1/em.ear</source-path>
<deployment-order>400</deployment-order>
<security-dd-model>DDOnly</security-dd-model>
<staging-mode>nostage</staging-mode>
</app-deployment>
Thanks
Ravi JeggaHello Ravi:
I too like Kenny experienced the EXACT same thing this morning. I was trying to figure out how to modify the formsweb.cfg and I remembered from when I install Oracle9i/10g AS a few years back, that it was on the Enterprise Manager Console for forms (different than the EM for the database). Well that's different than the consoles for Weblogic Server and Weblogic Server for Forms. I ran into the same errors Kenny did, and I followed your steps except that I did install into the domain the Enterprise Manager so when I looked at the config.xml I do see the same code that you posted above. Yet I still get the error when accessing
http://computer:7001/em
Also when trying to run emctl (I copied the perl directory from the database) and same error as Kenny. Any tips/clues?
I'm running on Red Hat Enterprise Linux 5, Oracle 11g (database, Fusion Middleware).
Thanks,
Gio

Oracle Fusion Middleware 11G B2B Document Type not getting Identified

Hello,
I have installed Oracle Fusion Middleware 11g on my local machine and created a custom document type with proper .xsd definition and XPath Expression Identifier in Oracle B2B interface and configured its trading partners ( Host & Remote ) along with an agreement between the partners.
I have also configured the host listening channel of Generic-File type which picks xml files from my c:\orclsrvs_in folder.
My problem is that the moment I drop any sample file in the expected directory, it gets picked up from B2B , but there isn't any record of the same under Reports and Metrics links.
The Business message, Application message and Conversation message tabs are also not showing any information about the record picked, but in wire message tab, the record is shown in PROCESSING state.
I am not able to conclude whats wrong behind this.. where can i track the logs for the same ??
kindly help to resolve this issue.
Thanks & Regards
Hiteshkumar Chaudhary

Hi Hitesh,
i came to know that B2B extracts the TP name from the filename itselfYes, in case of Generic File, Generic SFTP and Generic FTP, file name provides the necessary values to Oracle B2B to identify the Trading Partner. You can define your own file name format in the Delivery Channel under Transport Protocol Parameters in field "Filename format" (It's an optional field but it is always good to define your own format, otherwise B2B will take it's default format - TradingPartner_DocumentType_Revision_msgType_msgId_replytoMsgID_extension.xml ). Following Filename formats can be used -
%FROM_PARTY%
%TO_PARTY%
%DOCTYPE_NAME%
%DOCTYPE_REVISION%
%MSG_ID%
%TIMESTAMP%
These file name formats can be used in any combination; for example,
%TO_PARTY%_%DOCTYPE_NAME%_%DOCTYPE_REVISION%.dat
Note - Any file extension is allowed.
what are the system parameters to be set in weblogic console and how?? This activity is part of the pre and post installation steps. If you have done those without getting any errors then nothing else is required.
how shall I reinstall XEngine properly ??XEngine is part of B2B installation. If B2B gets installed without flashing any errors then we assume that other components of this part has installed properly.
Regards,
Anuj
Edited by: Anuj Dwivedi, Infosys on Aug 28, 2009 5:51 PM

Oracle Application Server 10g/Oracle Fusion Middleware 11g

Hi folks, This question related to migration/upgrade of Oracle Application Server infrastructure.
I see that the Oracle has come up with Oracle Fusion Middleware 11g. Is it the next release of Oracle Application Server 10g. I have the following questions. Appreciate if any one can provide answers to the following questions. Please correct me if my understanding of these oracle products is not right! Thanks
1. What is the future of Oracle Application Server?
2. Is it Oracle Fusion Middleware(OFM) 11g is the upgrade path if one need
to upgrade?
3. Is it expected that expected that customers need(if require) to move to OFM 11g?
4. Does OFM 10g comes with Oracle Application Server? If not what does
it comes with?
5. If it does not, what about customers having applications built using oracle forms and reports? Does OFG 11g
support Oracle forms and reports?
I understand that OFM 10g comes with Oracle web logic server!
Thanks in advance.
movva

To run Forms and Reports in Oracle Fusion Middleware 11g you have to use the distribution "Portal, Forms, Reports and Discoverer" in the FMW 11g software pack.
The structure of what we used to call "the application server" has changed a bit however, in the following way:
- In 11g you need to install the Javaserver WebLogic software (version 10.3.3 for the current Forms 11g version 11.1.1.3) first.
In 10g the installation of the Javaserver (OC4J) was part of the App server install.
Note that you just have to install the software, the configuration script for creating a Forms app server instance creates the WebLogic domain (comparable with the OC4J instance) for you.
- In 11g the Fusion Middleware software installation is separate from the creation of an application server instance.
This is more convenient and comparable to Oracle database and Weblogic installation.
- The Fusion Middleware Configuration script installs two parts of the product: 1. A WebLogic Domain. 2. A Fusion Middleware instance.
The first contains everything related to Java, such as the servlet configuration file (formsweb.cfg), while the latter contains everything that has less to do with the Javaserver
- No more Infrastructure server
The Infrastructure server does not exist anymore. If you want to use Single Sign On with Forms/Reports 11g you can install Identity Management 10.1.4.3 (or use Identity Management 11g, and configure separately the 10.1.4.3 Single Sign On) or keep your old 10g Infrastructure installation.
During installation you just have to specify you want to use OID and SSO and it configures out of the box.
Under normal circumstances the same licenses apply to 10g and 11g (as long as you do not use WebLogic for other purposes).

Problem with Reports Server on Fusion Middleware 11g

Hi,
We recently installed a new Weblogic Fusion Middleware Server 11g and I'm trying to get the reports server to start. When I issue the opmnctl command to start the standalone report server it says it is unable to do so but does not explain why. Our old 10g reports server was on Windows Server 2003 and the new 11g one is on Linux RHEL 4 so there are some differences, I'm hoping someone can give me a hand to find out what the problem is - at the moment I'm flying blind.
Thanks
Adam

In the documentation that Shail pointed to, take a look at the Migration Assistant part:
http://download.oracle.com/docs/cd/E12839_01/doc.1111/e10394/migtool.htm#i1004902
*"The Oracle Forms Migration Assistant updates obsolete usage in your PL/SQL code in order to upgrade your Forms 6i applications to Oracle Forms 11g."*
I think it is clear that you can upgrade from 6i to 11g in one step... you need to upgrade to 10g first if you are coming from pre 6i versions ...
http://download.oracle.com/docs/cd/E12839_01/doc.1111/e10394/plsqlconv.htm#i1007147
*"If you are upgrading from releases of Forms before Forms 6i to Oracle Forms 11g, you must first upgrade your applications to Forms 10g, and then upgrade* them to Oracle Forms 11g."+
You can also decide not to use the Migration assistant and open the 6i objects (.fmb, .mmb, etc) with the Forms Builder 11g and they would be upgraded to 11g by simply saving the object.
http://download.oracle.com/docs/cd/E12839_01/doc.1111/e10394/fmbfmt.htm#i1008219

Fusion middleware 11g installation steps

Hello,
I am trying to install Oracle Fusion Middleware 11g and found some of the binaries to be installed.Please let me know if these are the software needed and
Also, please confirm which product needs to be installed first. Here, is what my guessing order is currently. Please correct me if I am wrong.
1.     Install Oracle 11g Database
2.     Create Repository for OIM 11g Through Repository Creation Utility(RCU) ofm_rcu_win32_11.1.1.3.3_disk1_1of1
3.     Install Web logic Server wls1033_oepe111150_win32
4.     Install Identity Management 11.1.2.0 ofm_idm_win_11.1.1.2.0_32_disk1_1of1
5.     Overwrite Identity Management 11.1.3.0 ofm_idm_win_11.1.1.3.0_32_disk1_1of1
6.     Install Identity And Access Management 11.1.1.3.0 ofm_iam_generic_11.1.1.3.0_disk1_1of1
7.     Install SOA Component ofm_soa_generic_11.1.1.2.0_disk1_1of1
8.     Overwrite SOA Component ofm_soa_generic_11.1.1.3.0_disk1_1of1
Thanks,
Krish.

Krish,
There are two main installable products in IdM 11g
A) OID/OVD/OIM 11.1.1.4 (current in 11.1.1.5) - You don't need SOA for this and steps to install/configure are documented on my blog http://onlineappsdba.com/index.php/2011/03/23/install-oracle-identity-management-oimidm-11114-oid-ovd-oif-high-level-steps/
B) OAM/OIM/OAAM/OIN/OAPM 11.1.1.3 - You need SOA 11.1.1.3 only if you are selecting OIM . For step by step installation and configuration check
http://onlineappsdba.com/index.php/2010/08/05/oracleidm-11g-step-by-installation-of-oam-oim-oaam-oapm-oin-111130-part-i-load-schema/ (This is 8 part series)
Note : If you are installing 11.1.1.3 then select weblogic 10.3.3 and for 11.1.1.4 select weblogic 10.3.4 ()
Atul Kumar
- Book "OAM/OIM 11g for Administrators" -> http://onlineappsdba.com/index.php/2011/02/23/my-book-oracle-identity-access-manager-11g-for-administrators-is-now-available-in-raw-format/

Deploying forms on Fusion Middleware 11g

Hi everyone! I will post my thread in english and spanish.
English:_
I have developed a simple form using developer 11g on a windows pc, and now I want to deploy it on a SLES10 server that has installed WebLogic Server 10.3/Fusion Middleware 11g. The form just has a button. When a user press it, appears a modal window showing a message (WHEN-BUTTON-PRESSED event with a message('') invocation). From the developer´s PC the form works fine, showing the modal window, but when I execute the form from the server using http:\\<server>:<port>\forms\frmservlet?form=<form_name> I see the form in the applet but when I press the button, nothing happens... no modal window, no error, nothing at all. It seems that the trigger is not firing.
Can anyone help me, please?
Español:_
Desarrollé un form trivial utilizando developer 11g bajo windows y quiero desplegarlo en un servidor linux que tiene instalado WebLogic server 10.3 con Fusion Middleware 11g. El form solo tiene un botón que al presionarlo hace un message mostrando en una ventana un mensaje ( evento WHEN-BUTTON-PRESSED invocando el built-in message('') ). Al ejecutar el form desde la pc de desarrollo puedo verlo sin problemas así como también su ventana modal, pero cuando subo el fmx al servidor para desplegarlo, lo veo bien pero al presionar el botón no hace nada. Ni siquiera da error... da la sensación de que no se ejecuta el evento WHEN-BUTTON-PRESSED.
Alguien tiene alguna sugerencia?
Thanx, Gracias!!
Gastón.-

Hi Sid
1. Check if your .EAR file has a .WAR file for the WebServices. It should have a war file. And open war file like in winzip and under Web-Inf you should see a WSDL folder that should have .wsdl and .xsd files etc. Open this .wsdl and look at the URL. Try opening that URL in the browser.
If you EAR do not have WAR file. Select your application -> Right click properties -> Deployment and select your deployment profile and under Application Assembly make sure to check the box for your webservices project.
From Weblogic Admin Console, make sure your EAR is deployed successfully and there also you can expand it and see the WAR module under this. And you should be able to test your webservice wsdl from this war file from one of the tabs in weblogic console.
Thanks
Ravi Jegga

Fusion Middleware 11g (Forms) Application setup

Hi,
This is a requirement in Weblogic server set up for a Fusion Middleware 11g (Forms) Application
I have 2 requirements:
If there is a url say https://abc.world.corp/
1. I wanted to restrict the user from accessing https://abc.world.corp/admin (this is an admin console)
2. I want the user to receive an error message if he types a wrong url like https://abc.world.corp0/ or https://abc.world.cor/
I would like to know how to set up this. Can somebody provide a solution.
Thanks in Advance
Ram

Hi Michael,
Thanks for your valuable inputs.
Below line in CRMS_KR.htm was causing the problem because while directly hitting the CRMS_KR.htm we had hard-coded all the tag values which in other case is read from formweb.cfg
Before:
*<PARAM NAME="serverURL" VALUE="/forms/lservlet?ifcfs=/forms/frmservlet?acceptLanguage=en-us">*
We modified it to
After:
*<PARAM NAME="serverURL" VALUE="/forms/lservlet">*
Now we are able to hit the below URL sucessfully
http://scrmskr.apac.nsroot.net:7801/forms/html/CRMS_KR.htm
Thanks & Regards,
Harish

Oracle Designer 10g (10.1.2.6) + Oracle Fusion Middleware 11g

Hi,
Can Oracle Designer 10g (10.1.2.6 - last release) generated files (*.fmx, *.plx, *.mmx, *.rep...) be deployed onto Oracle Fusion Middleware 11g platform (Portal, Forms, Reports and Discoverer 11.1.1.2.0 + Weblogic Server 10.3.3) without further recompiling?
With regards,
Goran

Mark Striekwold wrote:
In the release notes for Designer 10.1.2.6 there are steps on Configuring Oracle Designer to Work With Oracle Forms 11g (this is a quote from Designer 10.1.2.6 has now been released.
Indeed, there is a note about configuring Designer to work with Forms 11g in the release notes.
Thanks, Mark.
With regards,
Goran

Trouble with Documentation ZIP File for Fusion Middleware 11g (11.1.1.6)

Hello,
I downloaded E23943_01.zip, which is the 2.5 GB documentation set for Fusion Middleware 11g (11.1.1.6), WebLogic 10.3.6. WinZip will not open the ZIP file due to this error: too many entries in central directory according to end of central directory info. My other ZIP programs report essentially the same error as WinZip.
When I first encountered the error, I assumed my download did not complete correctly; but I downloaded it three times, with the same error. All three downloads had the same file sizes, and I even binary-compared two of them, which were identical.
I am suspicious that the source E23943_01.zip file on Oracle's site is corrupt. Can anyone corroborate or refute my suspicions?
Thanks,
effdj

you can download from the edelivery site
https://edelivery.oracle.com/EPD/Download/get_form?egroup_aru_number=11493752

Report Instance not getting started in Oracle Fusion Middleware 11g Report

Hi
Report Instance not getting started in Oracle Fusion Middleware 11g Report Instance Error
Rep-50125 Java.lang.nullpointerexception
I just installed Oracle Forms,Reports 11g 11.1.1.3.0 in my machine
Even I started opmnctl(Oracle Process Management Control). Its too running fine.
Please Guide me the settings need to do to start the report instance.
Regards
Murali N S

Hello,
Copy rwlpr.exe from Oracle_Home\bin to Oracle_Instance\config\reports\bin
Regards

Can JDev 10.1.3 ADF application run in Oracle Fusion Middleware 11g?

Hi,
We have a 10.1.2.0.2 application server and our JDeveloper 10.1.3 ADF application is running in a separate 10.1.3 home because it was unable to run in the first one. We are thinking about upgrading to Fusion Middleware 11g and I'm wondering if anyone knows will I be able to set it up somehow so that the JDev application runs in this or would I leave it in the 10.1.3?
Thanks
Adam

I dont think this would be feasible till project fusion is through.
Thanks
Tapash

Weblogic- Fusion Middleware 11g domain JPS security issue.

Similar Messages

Maybe you are looking for