Weblogic HTTP Authentication on 11g webservice

Hi all
We are recently migrating webservice from 10g to 11g, but keep 10g client use for connecting the new 11g interface. Due to previous technical limitation, the 10g client is found failed to connect 11g and thus we built a middleware between them. The webservice server side (11g) is protected with HTTP authentication on weblogic and we found that both 11g client and the middleware can connect the server side successfully authenticated. Only when we use the 10g to connect the middleware, server side blocks the transaction with error code 401 unauthorized. Can everybody know any tricks behind, thanks.
11g ws client -----> [HTTP AUTH] --------> 11g server side [ OK ]
Middleware -> 11g ws client ------> [HTTP AUTH] -------> 11g server side [ OK ]
10g client --------> Middleware -> 11g ws client ------> [HTTP AUTH] -------> 11g server side [ FAILED ]
Cheers
Chris
Edited by: Nexus Chris on Dec 17, 2012 10:13 AM
Edited by: Nexus Chris on Dec 17, 2012 10:13 AM

Hi,
guess this is the wrong forum and you should post this question on the WLS or SOA forum here on OTN. I imagine that the two services a different in the way that 10g is JAX-RCP and 11g uses JAX-WS. Anyway, the two forums I mentioned may be best to get this sorted
Frank

Similar Messages

Webservice with HTTP authentication

Hi,
how do i supply the userid an password for a http authenticated webservice. I already choose the option for http authentication on the security tab on the logical port.
Alos tried to find it in the Visual Admin to the server but i am stuck.
Greetings Danny.

There are two ways to do this
Option 1: Hard code the Username/Password
For this, use the method _setUser and _setPassword.
These are methods for your model class Request_<WebService>_PortType.... (the model class for the webservice). I invoked these methods in the wdDoInit method of the component controller class.
For example, i imported the WSDL for the RFC SXMB_GET_MESSAGE_LIST and used it like this:
Request_SXMB_GET_MESSAGE_LISTPortType_SXMB_GET_MESSAGE_LIST oRequest =
new Request_SXMB_GET_MESSAGE_LISTPortType_SXMB_GET_MESSAGE_LIST();
oRequest._setUser("bcuser");
oRequest._setPassword("password");
Option 2: Use HTTP Destinations
Open Visual Administrator and goto node Services, Destination Service. Create a HTTP destination with the URL of the webservice, maybe choose basic authentication and give the username / password. Now, you could use this HTTP destination in the component controller class. Even though there is a method _setHTTPDestinationName, this did not work for me. I had to write the following code to retrieve the URL, username, password from the HTTP destination
import javax.naming.Context;
import javax.naming.InitialContext;
import javax.naming.NamingException;
import java.net.HttpURLConnection;
 InitialContext ctx ;
 Object obj;
 DestinationService dstService;
 Destination destination;
 HTTPDestination httpDestination ;
 HttpURLConnection httpurlconnection = null;
 Properties destprop = null;
 String url = "";
 String username = "";
 String password = "";
 ctx = new InitialContext();
 obj = ctx.lookup(DestinationService.JNDI_KEY);
 dstService = (DestinationService) obj;
 destination = dstService.getDestination("HTTP","NC_IS");
 destprop = destination.getDestinationProperties();
 httpDestination = (HTTPDestination) destination;
 url = httpDestination.getUrl();
 username = destprop.getProperty("USERNAME");
 password = destprop.getProperty("PASSWORD");
(I know the java code sucks and the purists will hang me; nevertheless it works)
Besides the code, you need to do the following as well:
(1) In the Package explorer, select your project, right click, cick on "Set Additional Libraries.."
(2) Select security.class and tc/sec/destinations/interface
(3) Click on menu Project > Properties, goto Webdynpro refereces node in the tree and add the following
 (a) Interface References: tcsecdestinations~interface
 (b) Service References: tcsecdestinations~service
All the best, try option 1 first before you embark on the second one.
Regards, Parag.

UCM 11g web services with HTTP authentication

Is it possible to setup UCM 11g web services with HTTP authentication?
I did setup UCM 11g web services using OWSM policies and are working well.
But my development team wants to consume web services with only HTTP authentication (simple user name and password), do not want to use Keystore files and encryption.
Please help me guys.
Thank you in advance

Hi ,
If you are looking to use the WSDL to execute ucm services then use SoapUI IDE on development , there it requires only the http authentication method .
Let me know if this is the actual requirement which you were looking for or if I have missed the point .
I use this to quickly test WSDL and verify if the service being invoked is actually correct or not .
Thanks,
Srinath
Edited by: Srinath Menon on Apr 26, 2013 11:32 AM

Failed to start Oracle Weblogic Server node in 11g

Hello friends,
I have a problem starting the Weblogic Server node Oracle 11g (10.3.5).
Any suggestions to solve the problem
Logs----------------------------------------------------------------------------------
<Nov 3, 2011 12:33:03 PM> <INFO> <NodeManager> <Server output log file is '/opt/middleware/user_projects/domains/DomainOWL/servers/Server01/logs/Server01.out'>
<Nov 3, 2011 12:33:07 PM PET> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Nov 3, 2011 12:33:07 PM PET> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Nov 3, 2011 12:33:11 PM PET> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Server VM Version 19.1-b02 from Sun Microsystems Inc.>
<Nov 3, 2011 12:33:18 PM PET> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 >
<Nov 3, 2011 12:33:24 PM PET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Nov 3, 2011 12:33:24 PM PET> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Nov 3, 2011 12:33:25 PM PET> <Notice> <Log Management> <BEA-170019> <The server log file /opt/middleware/user_projects/domains/DomainOWL/servers/Server01/logs/Server01.log is opened. All server side log events will be written to this file.>
<Nov 3, 2011 12:33:25 PM PET> <Warning> <NodeManager> <BEA-300043> <Node manager native library not found - server process id not saved.>
<Nov 3, 2011 12:33:26 PM PET> <Error> <Socket> <BEA-000438> <Unable to load performance pack. Using Java I/O instead. Please ensure that a native performance library is in: '"/opt/jdk1.6.0/jre/lib/sparcv9/server:/opt/jdk1.6.0/jre/lib/sparcv9:/opt/jdk1.6.0/jre/../lib/sparcv9:/opt/middleware/patch_wls1035/profiles/default/native:/opt/middleware/patch_ocp360/profiles/default/native:/opt/middleware/wlserver_10.3/server/native/solaris/sparc64:/opt/middleware/wlserver_10.3/server/native/solaris/sparc64:/opt/middleware/wlserver_10.3/server/native/solaris/sparc64/oci920_8:/usr/jdk/packages/lib/sparcv9:/lib/64:/usr/lib/64"'
>
<Nov 3, 2011 12:33:37 PM PET> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Nov 3, 2011 12:33:40 PM PET> <Warning> <Store> <BEA-280101> <The persistent file store "_WLS_Server01" is forced to use buffered I/O and so may have significantly degraded performance. Either the OS/hardware environment does not support the chosen write policy or the native wlfileio library is missing. See store open log messages for the requested and final write policies. See the documentation on store synchronous write policy configuration for advice.>
<Nov 3, 2011 12:33:49 PM PET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Nov 3, 2011 12:33:49 PM PET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Nov 3, 2011 12:33:56 PM PET> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<Nov 3, 2011 12:33:56 PM PET> <Notice> <Cluster> <BEA-000197> <Listening for announcements from cluster using unicast cluster messaging>
<Nov 3, 2011 12:33:56 PM PET> <Notice> <Cluster> <BEA-000133> <Waiting to synchronize with other running members of oimClusterT.>
<Nov 3, 2011 12:34:26 PM PET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Nov 3, 2011 12:34:27 PM PET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Nov 3, 2011 12:34:27 PM PET> <Notice> <Cluster> <BEA-000162> <Starting "async" replication service with remote cluster address "null">
<Nov 3, 2011 12:34:31 PM PET> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias DemoIdentity from the jks keystore file /opt/middleware/wlserver_10.3/server/lib/DemoIdentity.jks.>
<Nov 3, 2011 12:34:31 PM PET> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file /opt/middleware/wlserver_10.3/server/lib/DemoTrust.jks.>
<Nov 3, 2011 12:34:31 PM PET> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file /opt/jdk1.6.0/jre/lib/security/cacerts.>
<Nov 3, 2011 12:34:33 PM PET> <Alert> <Security> <BEA-090152> <Demo trusted CA certificate is being used in production mode: [
Version: V3
Subject: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: SunPKCS11-Solaris RSA public key, 512 bits (id 58638024, session object)
modulus: 9550192877869244258838480703390456015046425375252278279190673063544122510925482179963329236052146047356415957587628011282484772458983977898996276815440753
public exponent: 65537
Validity: [From: Thu Mar 21 15:12:27 PET 2002,
 To: Tue Mar 22 15:12:27 PET 2022]
Issuer: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
SerialNumber: [ 33f10648 fcde0deb 4199921f d64537f4]
Certificate Extensions: 1
[1]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
Key_CertSign
Algorithm: [MD5withRSA]
Signature:
0000: 9D 26 4C 29 C8 91 C3 A7 06 C3 24 6F AE B4 F8 82 .&L)......$o....
0010: 80 4D AA CB 7C 79 46 84 81 C4 66 95 F4 1E D8 C4 .M...yF...f.....
0020: E9 B7 D9 7C E2 23 33 A4 B7 21 E0 AA 54 2B 4A FF .....#3..!..T+J.
0030: CB 21 20 88 81 21 DB AC 90 54 D8 7D 79 63 23 3C .! ..!...T..yc#<
] The system is vulnerable to security attacks, since it trusts certificates signed by the demo trusted CA.>
<Nov 3, 2011 12:34:33 PM PET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=Entrust Root Certification Authority - G2,OU=(c) 2009 Entrust\, Inc. - for authorized use only,OU=See www.entrust.net/legal-terms,O=Entrust\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 3, 2011 12:34:33 PM PET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 3, 2011 12:34:34 PM PET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 3, 2011 12:34:34 PM PET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 3, 2011 12:34:34 PM PET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 3, 2011 12:34:34 PM PET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 3, 2011 12:34:34 PM PET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 3, 2011 12:34:34 PM PET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 3, 2011 12:34:34 PM PET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 3, 2011 12:34:34 PM PET> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on 192.168.1.10:7006 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Nov 3, 2011 12:34:34 PM PET> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 192.168.1.10:7005 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Nov 3, 2011 12:34:34 PM PET> <Notice> <WebLogicServer> <BEA-000330> <Started WebLogic Managed Server "Server01" for domain "DomainOWL" running in Production Mode>
Exception in thread "[STANDBY] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
 at java.lang.ClassLoader.defineClass1(Native Method)
 at java.lang.ClassLoader.defineClassCond(ClassLoader.java:632)
 at java.lang.ClassLoader.defineClass(ClassLoader.java:616)
 at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:141)
 at java.net.URLClassLoader.defineClass(URLClassLoader.java:283)
 at java.net.URLClassLoader.access$000(URLClassLoader.java:58)
 at java.net.URLClassLoader$1.run(URLClassLoader.java:197)
 at java.security.AccessController.doPrivileged(Native Method)
 at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
 at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
 at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
 at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
 at weblogic.work.ExecuteThread.execute(ExecuteThread.java:217)
 at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Exception in thread "[ACTIVE] ExecuteThread: '8' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '14' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '16' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
<Nov 3, 2011 12:36:27 PM PET> <Error> <HTTP> <BEA-101020> <[ServletContext@15375304[app:bea_wls_deployment_internal module:bea_wls_deployment_internal.war path:/bea_wls_deployment_internal spec-version:null]] Servlet failed with Exception
java.lang.OutOfMemoryError: PermGen space
>
Exception in thread "[ACTIVE] ExecuteThread: '13' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "Timer-1" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '23' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
<Nov 3, 2011 12:36:53 PM PET> <Error> <HTTP> <BEA-101020> <[ServletContext@15375304[app:bea_wls_deployment_internal module:bea_wls_deployment_internal.war path:/bea_wls_deployment_internal spec-version:null]] Servlet failed with Exception
java.lang.OutOfMemoryError: PermGen space
>
<Nov 3, 2011 12:36:24 PM PET> <Error> <Socket> <BEA-000405> <Uncaught Throwable in processSockets
java.lang.OutOfMemoryError: PermGen space.
java.lang.OutOfMemoryError: PermGen space
>
<Nov 3, 2011 12:36:33 PM PET> <Error> <JMX> <BEA-149501> <An exception occurred while registering the MBean com.bea:Name=idmAdminServerT,Type=Server at property WebService.
java.lang.OutOfMemoryError: PermGen space
>
Exception in thread "[ACTIVE] ExecuteThread: '21' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '9' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '24' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '17' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[STANDBY] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
<Nov 3, 2011 12:37:16 PM PET> <Warning> <Socket> <BEA-000402> <There are: 5 active sockets, but the maximum number of socket reader threads allowed by the configuration is: 4. You may want to alter your configuration.>
Exception in thread "[ACTIVE] ExecuteThread: '20' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '15' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '12' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '25' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
<Nov 3, 2011 12:39:41 PM PET> <Error> <HTTP> <BEA-101216> <Servlet: "CoordinatorPortTypeServlethttp" failed to preload on startup in Web application: "wls-wsat.war".
java.lang.OutOfMemoryError: PermGen space
>
<Nov 3, 2011 12:42:32 PM PET> <Error> <HTTP> <BEA-101017> <[ServletContext@15375304[app:bea_wls_deployment_internal module:bea_wls_deployment_internal.war path:/bea_wls_deployment_internal spec-version:null]] Root cause of ServletException.
java.lang.OutOfMemoryError: PermGen space
>
<Nov 3, 2011 12:43:15 PM PET> <Error> <HTTP> <BEA-101017> <[ServletContext@15375304[app:bea_wls_deployment_internal module:bea_wls_deployment_internal.war path:/bea_wls_deployment_internal spec-version:null]] Root cause of ServletException.
java.lang.OutOfMemoryError: PermGen space
>
<Nov 3, 2011 12:43:26 PM PET> <Error> <Socket> <BEA-000405> <Uncaught Throwable in processSockets
java.lang.OutOfMemoryError: PermGen space.
java.lang.OutOfMemoryError: PermGen space
>
Exception in thread "[ACTIVE] ExecuteThread: '18' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
java.lang.OutOfMemoryError: PermGen space
Exception in thread "[STANDBY] ExecuteThread: '19' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
<Nov 3, 2011 12:45:53 PM PET> <Error> <HTTP> <BEA-101017> <[ServletContext@15375304[app:bea_wls_deployment_internal module:bea_wls_deployment_internal.war path:/bea_wls_deployment_internal spec-version:null]] Root cause of ServletException.
java.lang.OutOfMemoryError: PermGen space
>
Exception in thread "[ACTIVE] ExecuteThread: '22' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '11' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '10' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "weblogic.timers.TimerThread" java.lang.OutOfMemoryError: PermGen space
Thanks

<Nov 4, 2011 11:42:08 AM PET> <Error> <Socket> <BEA-000405> <Uncaught Throwable in processSockets
java.lang.OutOfMemoryError: PermGen space.
java.lang.OutOfMemoryError: PermGen space
 at java.lang.ClassLoader.defineClass1(Native Method)
 at java.lang.ClassLoader.defineClassCond(ClassLoader.java:632)
 at java.lang.ClassLoader.defineClass(ClassLoader.java:616)
 at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:141)
 at java.net.URLClassLoader.defineClass(URLClassLoader.java:283)
 Truncated. see log file for complete stacktrace
>
<Nov 4, 2011 11:42:34 AM PET> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: java.lang.OutOfMemoryError: PermGen space
java.lang.OutOfMemoryError: PermGen space
 at java.lang.Class.getDeclaredMethods0(Native Method)
 at java.lang.Class.privateGetDeclaredMethods(Class.java:2427)
 at java.lang.Class.getDeclaredMethod(Class.java:1935)
 at java.io.ObjectStreamClass.getInheritableMethod(ObjectStreamClass.java:1349)
 at java.io.ObjectStreamClass.access$2200(ObjectStreamClass.java:52)
 Truncated. see log file for complete stacktrace
>
The WebLogic Server encountered a critical failure
Reason: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '12' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "main" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '14' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '15' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '25' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '22' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
<Nov 4, 2011 11:44:08 AM PET> <Warning> <Socket> <BEA-000402> <There are: 5 active sockets, but the maximum number of socket reader threads allowed by the configuration is: 4. You may want to alter your configuration.>
Exception in thread "[ACTIVE] ExecuteThread: '27' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '21' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '23' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
<Nov 4, 2011 11:44:43 AM PET> <Error> <Socket> <BEA-000405> <Uncaught Throwable in processSockets
java.lang.OutOfMemoryError: PermGen space.
java.lang.OutOfMemoryError: PermGen space
I made the change and continue with the same problem, you can tell me which file should make this change, very grateful

Basic http authentication not working when consuming Web Service in BPEL.

Hi,
I am consuming an AXIS Web Service from BPEL 10.1.3. The Web Service uses basic http
authentication so we need a way to get username and password into the http
header. In the Oracle BPEL Process Manager Administrator's Guide 10g
(10.1.3.1.0) section 1.3.4.1 HTTP Basic Authentication (10.1.2.0.2) is stated
that this can be done using the properties httpUsername and httpPassword. I
have set the 2 for the partner link in bpel.xml but username and password does
not get in to the http header. Has anybody got an idea?
Regards Pete

I'm having the same sorts of problems with 10.1.3.1.0. I've got a deployed BPEL suitcase that's trying to hit a BASIC AUTH-secured web service running on a WebLogic 8.1 server. I've set up my partner link according to the documentation, and the BPEL console Descriptor tab even shows the parameters correctly:
partnerLinkBindings
client
 wsdlLocation awardService.wsdl
spsAwardSubmitPartnerLink
 basicHeaders credentials
 basicUsername ko1
 basicPassword xxxxx
 wsdlLocation IAwardDraftServiceRef1.wsdl
However, when I funnel the resultant call to the endpoint specified in IAwardDraftServiceRef1.wsdl, none of the fields I would expect show up in the HTTP header:
POST /pd2WebServices/service/IAwardDraftService HTTP/1.1
Host: vm-orcl-app-srv:4444
Connection: Keep-Alive, TE
TE: trailers, deflate, gzip, compress
User-Agent: Oracle HTTPClient Version 10h
SOAPAction: ""
Accept-Encoding: gzip, x-gzip, compress, x-compress
Content-type: text/xml; charset=UTF-8
Content-length: 3800
<?xml version="1.0" encoding="UTF-8"?>
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"><env:Body><IAwardDraftSubmitNew xmlns="http://www.caci.com/pd2/pub">
<IAwardDraft>
<accessController/>
<agreementEndDate/>
Is there some other configuration piece I'm missing?? I've tried the other variation using httpBasicHeaders, with the same results. I even noted that the "Oracle® BPEL Process Manager Administrator's Guide" says that "Starting with Oracle BPEL Process Manager release 10.1.3, all partner link properties are automatically propagated into the HTTP header." I've tried putting "extra" parms in the partner link bindings, but they don't show up either.
What am I missing??
Thanks,
Mike

Basic authentication of a WebService -- Possible?

Hi All,
I have a web service that's defined like this:
<mx:Webservice wsdl="
http://username:password@intranet/webservices/myservice.asmx?WSDL"
/>
username and password are replace with the username and
password used by IIS's basic authentication subsystem to restrict
access to the web service.
This seems to work just fine in Opera and Firefox, but in IE,
it just hands. No fault or anything, it just hangs there, waiting
for the WSDL to load.
I've only tested in IE6, I'm not sure if it does the same in
IE7.
Is this a bug in Flex/Flash, a bug in IE, or something else
entirely? Is there a different way to do basic authentication with
web services?
-Josh

I'd use an HTTP sniffer to see if you can glean any more info
about what exactly is going over the wire and what might be
different in the MSIE case.

Access denied - http authentication

Hi all,
I have a java web service client that needs to connect to a .net web service. When I set up the client in Netbeans 6, the wizard asks to accept the certificate - which I do.
The .net web services provider gave me a username and password to access the web service, but when I typed it in, I got an error.
When I run the web service client, I get:
com.sun.xml.ws.client.ClientTransportException: request requires HTTP authentication: Access Denied
Where can I supply the authentication details for the client to access the server?
Thanks and regards,
Brenda

Can someone PLEASE tell me how to perform HTTP authentication when connecting from a java webservice client to a .Net web service?
I have tried:
<code>
((BindingProvider)port).getRequestContext().put(BindingProvider.USERNAME_PROPERTY, "94648137");
((BindingProvider)port).getRequestContext().put(BindingProvider.PASSWORD_PROPERTY, "Retail03");
</code>
but have had no luck. The web service is using LDAP authentication over HTTPS.
TIA
Brenda

Issue with HTTP Authentication

I am trying to implement an authentication/timeout
          system whereby the initial login is done by a standard
          HTML form (posted). When the session times out and the
          user requests a service, the session is "revived" by
          custom HTTP Authentication. In this way, a complex set
          of frames and multiple windows is not disrupted by a
          new window.
          The problem is that one a user HTTP Authenticates, the
          AUTHORIZATION header value stays until the browser is
          closed. Consequently, the user never has to
          authenticate again, even when the session times out,
          because when the servlet requests authorization, it is
          right there in the servlet request.
          So my question is, how do I clear or remove the
          AUTHORIZATION header item from the client ?
          Thanks.
          //Nicholas


Hi,
Opened a TAC and he confirmed that 8.2.1 supports the SDI for http/asdm authentication.
http://www.cisco.com/en/US/docs/security/asa/asa82/release/notes/asarn82.html#wp340497
Regards
Amar

How do we determine the HTTP authentication header for our hosted solution?

How do we determine the HTTP authentication header (adobeconnect_admin_httpauth) from our hosted solution? The documentation says to find it in a custom.ini file but I have no clue how to access that.
I need to supply that to the adobeconnect plugin used with a Moodle instance, screnshot below.
If it helps, when I click "Test Connection", I see the following output.
A series of tests have been run in order to determine whether the Adobe Connect Pro server has been properly setup for this integration to work and to also determine whether the user credentials provided in the activity global settings has the correct permissions to perform the neccessary tasks required by the activity module. If any of the tests below have failed, this activity module will not function properly.
For further assistance and documentation in how to set up your Adobe Connect Pro server please consult the MoodleDocs help page for this activity module Help page
Sending common-info call:
successfully obtained the session key: na11breezrirhb4f4ryf5shqy
successfully logged in as admin user
Testing retrevial of shared content, recording and meeting folders:
error obtaining shared content folder
XML request:
<?xml version="1.0" encoding="UTF-8"?> <params><param name="action">sco-shortcuts</param></params>
XML response:
<?xml version="1.0" encoding="utf-8"?> <results><status code="no-access" subcode="no-login"/></results>
error obtaining forced-archives (meeting recordings) folder
XML request:
<?xml version="1.0" encoding="UTF-8"?> <params><param name="action">sco-shortcuts</param></params>
XML response:
<?xml version="1.0" encoding="utf-8"?> <results><status code="no-access" subcode="no-login"/></results>
error obtaining meetings folder
XML request:
<?xml version="1.0" encoding="UTF-8"?> <params><param name="action">sco-shortcuts</param></params>
XML response:
<?xml version="1.0" encoding="utf-8"?> <results><status code="no-access" subcode="no-login"/></results>
error creating meeting testmeetingtest folder
XML request:
<?xml version="1.0" encoding="UTF-8"?> <params><param name="action">sco-update</param><param name="type">meeting</param><param name="name">testmeetingtest</param><param name="folder-id"/><param name="date-begin">2015-03-14T06:53:39.000+00:00</param><param name="date-end">2015-03-14T07:53:39.000+00:00</param></params>
XML response:
<?xml version="1.0" encoding="utf-8"?> <results><status code="invalid"><invalid field="folder-id" type="id" subcode="format"/></status></results>
error creating user testusertest
XML request:
<?xml version="1.0" encoding="UTF-8"?> <params><param name="action">principal-update</param><param name="first-name">testusertest</param><param name="last-name">testusertest</param><param name="login">[email protected]</param><param name="password">9B396EA828A00203FB3E8E69010FE537</param><param name="extlogin">[email protected]</param><param name="type">user</param><param name="send-email">false</param><param name="has-children">0</param><param name="email">[email protected]</param></params>
XML response:
<?xml version="1.0" encoding="utf-8"?> <results><status code="no-access" subcode="no-login"/></results>
What are we missing?
Thanks!

Here is the docuementation for loging in with an HTTP Headder Adobe Connect 9 * Log in from an application
Seeing as there may be some modification to files on the server, you may need to work with Adobe Support to see if they can be modified in the Hosted environment.Adobe Connect Help | Adobe Connect Support

Error when using Weblogic Http PubSub

Hi,
I am using Weblogic 10.3 with Weblogic Http PubSub with JMS. Weblogic doesn't start if configuration file WEB-INF/weblogic.xml contains the following tag:
<wls:container-descriptor>
 <wls:prefer-web-inf-classes>true</wls:prefer-web-inf-classes>
</wls:container-descriptor>
Here follows the stack trace:
<16-mar-2010 16.40.31 CET> <Error> <HTTP Pubsub Server JMS support> <BEA-2152102> <Cannot initialize topic listener for JMS channel
javax.jms.InvalidSelectorException: weblogic.messaging.kernel.InvalidExpressionException: Expression : "$002Freps$0030$002FsendImportCCData IS NOT NULL"
 at weblogic.jms.dispatcher.DispatcherAdapter.convertToJMSExceptionAndThrow(DispatcherAdapter.java:110)
 at weblogic.jms.dispatcher.DispatcherAdapter.dispatchSync(DispatcherAdapter.java:45)
 at weblogic.jms.client.JMSSession.consumerCreate(JMSSession.java:2914)
 at weblogic.jms.client.JMSSession.setupConsumer(JMSSession.java:2687)
 at weblogic.jms.client.JMSSession.createConsumer(JMSSession.java:2628)
 Truncated. see log file for complete stacktrace
javax.jms.InvalidSelectorException: weblogic.messaging.kernel.InvalidExpressionException: Expression : "$002Freps$0030$002FsendImportCCData IS NOT NULL"
 at weblogic.jms.dispatcher.Request.handleThrowable(Request.java:87)
 at weblogic.jms.dispatcher.Request.getResult(Request.java:52)
 at weblogic.messaging.dispatcher.Request.wrappedFiniteStateMachine(Request.java:1124)
 at weblogic.messaging.dispatcher.DispatcherImpl.syncRequest(DispatcherImpl.java:184)
 at weblogic.messaging.dispatcher.DispatcherImpl.dispatchSync(DispatcherImpl.java:219)
 Truncated. see log file for complete stacktrace
javax.jms.InvalidSelectorException: weblogic.messaging.kernel.InvalidExpressionException: Expression : "$002Freps$0030$002FsendImportCCData IS NOT NULL"
 at weblogic.jms.dispatcher.DispatcherAdapter.convertToJMSExceptionAndThrow(DispatcherAdapter.java:110)
 at weblogic.jms.dispatcher.DispatcherAdapter.dispatchSync(DispatcherAdapter.java:45)
 at weblogic.jms.frontend.FEConsumer.<init>(FEConsumer.java:259)
 at weblogic.jms.frontend.FESession$2.run(FESession.java:989)
 at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
 Truncated. see log file for complete stacktrace
javax.jms.InvalidSelectorException: weblogic.messaging.kernel.InvalidExpressionException: Expression : "$002Freps$0030$002FsendImportCCData IS NOT NULL"
 at weblogic.jms.dispatcher.Request.handleThrowable(Request.java:87)
 at weblogic.jms.dispatcher.Request.getResult(Request.java:52)
 at weblogic.messaging.dispatcher.Request.wrappedFiniteStateMachine(Request.java:1124)
 at weblogic.messaging.dispatcher.DispatcherImpl.syncRequest(DispatcherImpl.java:184)
 at weblogic.messaging.dispatcher.DispatcherImpl.dispatchSync(DispatcherImpl.java:219)
 Truncated. see log file for complete stacktrace
javax.jms.InvalidSelectorException: weblogic.messaging.kernel.InvalidExpressionException: Expression : "$002Freps$0030$002FsendImportCCData IS NOT NULL"
 at weblogic.jms.backend.BETopicImpl.activateSubscriptionQueue(BETopicImpl.java:225)
 at weblogic.jms.backend.BETopicImpl.createConsumer(BETopicImpl.java:373)
 at weblogic.jms.backend.BESessionImpl.createBEConsumer(BESessionImpl.java:390)
 at weblogic.jms.backend.BESessionImpl.createConsumer(BESessionImpl.java:400)
 at weblogic.jms.backend.BESessionImpl.invoke(BESessionImpl.java:297)
 Truncated. see log file for complete stacktrace
>
<16-mar-2010 16.40.31 CET> <Error> <HTTP Pubsub Server> <BEA-2150029> <ControllerServlet initialization failed: Cannot create JMS ChannelManager [com.bea.httppubsub.jms.internal.JmsChannelManagerImpl].
java.lang.RuntimeException: Cannot create JMS ChannelManager [com.bea.httppubsub.jms.internal.JmsChannelManagerImpl].
 at com.bea.httppubsub.internal.ChannelManagerFactoryImpl.createJmsChannelManager(ChannelManagerFactoryImpl.java:54)
 at com.bea.httppubsub.internal.ChannelManagerFactoryImpl.<init>(ChannelManagerFactoryImpl.java:27)
 at com.bea.httppubsub.internal.PubSubServerFactoryImpl.createPubSubServer(PubSubServerFactoryImpl.java:116)
 at com.bea.httppubsub.internal.PubSubServerFactoryImpl.createPubSubServer(PubSubServerFactoryImpl.java:60)
 at com.bea.httppubsub.servlet.ControllerServlet.init(ControllerServlet.java:171)
 Truncated. see log file for complete stacktrace
java.lang.reflect.InvocationTargetException
 at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
 at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
 at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
 at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
 at com.bea.httppubsub.internal.ChannelManagerFactoryImpl.createJmsChannelManager(ChannelManagerFactoryImpl.java:51)
 Truncated. see log file for complete stacktrace
java.lang.RuntimeException: [HTTP Pubsub Server JMS support:2152102]Cannot initialize topic listener for JMS channel
javax.jms.InvalidSelectorException: weblogic.messaging.kernel.InvalidExpressionException: Expression : "$002Freps$0030$002FsendImportCCData IS NOT NULL"
 at weblogic.jms.dispatcher.DispatcherAdapter.convertToJMSExceptionAndThrow(DispatcherAdapter.java:110)
 at weblogic.jms.dispatcher.DispatcherAdapter.dispatchSync(DispatcherAdapter.java:45)
 at weblogic.jms.client.JMSSession.consumerCreate(JMSSession.java:2914)
 at weblogic.jms.client.JMSSession.setupConsumer(JMSSession.java:2687)
 at weblogic.jms.client.JMSSession.createConsumer(JMSSession.java:2628)
 at weblogic.jms.client.JMSSession.createConsumer(JMSSession.java:2617)
 at weblogic.jms.client.WLSessionImpl.createConsumer(WLSessionImpl.java:908)
 at com.bea.httppubsub.jms.internal.TopicListener.initialize(TopicListener.java:52)
 at com.bea.httppubsub.jms.internal.JmsChannelManagerImpl.initJmsTopicListeners(JmsChannelManagerImpl.java:68)
 at com.bea.httppubsub.jms.internal.JmsChannelManagerImpl.<init>(JmsChannelManagerImpl.java:37)
 at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
 at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
 at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
 at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
 at com.bea.httppubsub.internal.ChannelManagerFactoryImpl.createJmsChannelManager(ChannelManagerFactoryImpl.java:51)
 at com.bea.httppubsub.internal.ChannelManagerFactoryImpl.<init>(ChannelManagerFactoryImpl.java:27)
 at com.bea.httppubsub.internal.PubSubServerFactoryImpl.createPubSubServer(PubSubServerFactoryImpl.java:116)
 at com.bea.httppubsub.internal.PubSubServerFactoryImpl.createPubSubServer(PubSubServerFactoryImpl.java:60)
 at com.bea.httppubsub.servlet.ControllerServlet.init(ControllerServlet.java:171)
 at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
 at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
 at weblogic.security.service.SecurityManager.runAs(Unknown Source)
 at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
 at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
 at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48)
 at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:521)
 at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1893)
 at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1870)
 at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1790)
 at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:2999)
 at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1371)
 at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:468)
 at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204)
 at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
 at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60)
 at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
 at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:117)
 at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204)
 at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
 at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60)
 at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
 at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:635)
 at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
 at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
 at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:16)
 at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:162)
 at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
 at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
 at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
 at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
 at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:196)
 at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
 at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
 at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
 at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
 at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
 at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
 at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
 at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
 at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: javax.jms.InvalidSelectorException: weblogic.messaging.kernel.InvalidExpressionException: Expression : "$002Freps$0030$002FsendImportCCData IS NOT NULL"
 at weblogic.jms.dispatcher.Request.handleThrowable(Request.java:87)
 at weblogic.jms.dispatcher.Request.getResult(Request.java:52)
 at weblogic.messaging.dispatcher.Request.wrappedFiniteStateMachine(Request.java:1124)
 at weblogic.messaging.dispatcher.DispatcherImpl.syncRequest(DispatcherImpl.java:184)
 at weblogic.messaging.dispatcher.DispatcherImpl.dispatchSync(DispatcherImpl.java:219)
 at weblogic.jms.dispatcher.DispatcherAdapter.dispatchSync(DispatcherAdapter.java:43)
 ... 58 more
Caused by: javax.jms.InvalidSelectorException: weblogic.messaging.kernel.InvalidExpressionException: Expression : "$002Freps$0030$002FsendImportCCData IS NOT NULL"
 at weblogic.jms.dispatcher.DispatcherAdapter.convertToJMSExceptionAndThrow(DispatcherAdapter.java:110)
 at weblogic.jms.dispatcher.DispatcherAdapter.dispatchSync(DispatcherAdapter.java:45)
 at weblogic.jms.frontend.FEConsumer.<init>(FEConsumer.java:259)
 at weblogic.jms.frontend.FESession$2.run(FESession.java:989)
 at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
 at weblogic.security.service.SecurityManager.runAs(Unknown Source)
 at weblogic.jms.frontend.FESession.consumerCreate(FESession.java:985)
 at weblogic.jms.frontend.FESession.invoke(FESession.java:2931)
 at weblogic.messaging.dispatcher.Request.wrappedFiniteStateMachine(Request.java:961)
 ... 61 more
Caused by: javax.jms.InvalidSelectorException: weblogic.messaging.kernel.InvalidExpressionException: Expression : "$002Freps$0030$002FsendImportCCData IS NOT NULL"
 at weblogic.jms.dispatcher.Request.handleThrowable(Request.java:87)
 at weblogic.jms.dispatcher.Request.getResult(Request.java:52)
 at weblogic.messaging.dispatcher.Request.wrappedFiniteStateMachine(Request.java:1124)
 at weblogic.messaging.dispatcher.DispatcherImpl.syncRequest(DispatcherImpl.java:184)
 at weblogic.messaging.dispatcher.DispatcherImpl.dispatchSync(DispatcherImpl.java:219)
 at weblogic.jms.dispatcher.DispatcherAdapter.dispatchSync(DispatcherAdapter.java:43)
 ... 68 more
Caused by: javax.jms.InvalidSelectorException: weblogic.messaging.kernel.InvalidExpressionException: Expression : "$002Freps$0030$002FsendImportCCData IS NOT NULL"
 at weblogic.jms.backend.BETopicImpl.activateSubscriptionQueue(BETopicImpl.java:225)
 at weblogic.jms.backend.BETopicImpl.createConsumer(BETopicImpl.java:373)
 at weblogic.jms.backend.BESessionImpl.createBEConsumer(BESessionImpl.java:390)
 at weblogic.jms.backend.BESessionImpl.createConsumer(BESessionImpl.java:400)
 at weblogic.jms.backend.BESessionImpl.invoke(BESessionImpl.java:297)
 at weblogic.messaging.dispatcher.Request.wrappedFiniteStateMachine(Request.java:961)
 ... 71 more
If I remove the tags above, everything works correctly. I cannot understand what is the problem.
I am adding Weblogic Http PubSub to an existent application (so I do not know why tags have been inserted).
Does anyone can help me understand this problem?
Thanks in advance.
Regards,
Giuseppe

Hi Giuseppe --
I would open a service request with Oracle support for this.
-steve-

Adobe PDF Viewer X in Safari 5 not displaying documents protected by HTTP Authentication

I have the latest Adobe Reader X release (10.0.0) for Mac OS X 10.6 in Safari 5.0.3. The PDF Viewer is unable to display files hosted on directories protected by HTTP Authentication. The progress bar keeps spinning forever.
I've tried it on several Macs and various Apache web servers, with both Basic and Digest Authentification.
Adobe PDF Viewer running on Mac OS X 10.5 doesn't have this problem. Adobe PDF Viewer X running on Windows XP with Safari 5 doesn't either. So it is specific to the latest release for Mac OS X 10.6.
Any idea for a fix? I can't revert to a previous version of Reader since the older plug-in doesn't run in 64-bit Safari (the default on Snow Leopard) - please don't tell me to force Safari to run in 32-bit mode.
Is it at least a known bug that will be fixed soon?

You mean disabling HTTP Authentication? Yes, of course. And it works without it. That's how I know that the cause of the problem is HTTP Authentication.

Video behind http authentication does not play in Safari on iOS8.

Videos (quicktime and probably others) that are sitting behind http authenticated sites do not play properly in IOS8. This is true even with the new 8.0.2. When clicking on the mov file, Safari starts the integrated player (the player with the play button), but nothing plays and you can't press the play button.
Since I have access to the Apache web server that serves up the video, I can see what's happening on the backend. I see that Safari or the iOS video player Safari starts up fails to pass the authentication credentials to the server. I see a bunch of http 401 error messages (failed authentication) in the logs. When moving the same video to a not authenticated site, iOS8 does the right thing.
iOS7 (and before) and Safari on OSX does the right thing on authenticated sites. It authenticates properly with the server and plays the video.
Chrome on iOS8 also doesn't work either. Safari and Chrome use different versions of webkit, so I'm assuming its the video player that the browsers call on that's not passing the authentication off to the web server when making the http request.
Anyone else run into this problem or have a workaround? I reported this as a bug, but Apple hasn't acknowledged it yet.

I also have the same Exact Problem, only your explanition appears more technical and understandable. This problem appears more severe on YouTube.com videos and alike, however it is also severly choppy and problematic on other sites. Surprisingly Live Broadcast videos work better than not Live videos, however this is not something I'd like when my data isn't throttled yet. I crosstested it to see if there is any issues on my iPhone 4S (iOS 6, last version) and Galaxy S4 (Android Kit Kat, last version on S4) and there is no issues on those devices so it is an iOS 8(+0.1/0.2) and iOS 8.1 problem and I am 100% confident about it.
I do think it is the video player's problem with Websites and Webstreaming. There is no problems playing music videos on my device's storage. I didn't get that many error messages but it just doesn't play properly on Safari and Chrome, like what you are experiencing too. I may go ahead and report it too because it is gotten to a point where it is annoying to watch videos. It is not just an over 4G (+ or - LTE) only issue, it is also via Wifi even so it is a tad better. I can't tolerate playing a video 15 seconds in, have to wait 15 more seconds for it to play, it plays to 0:35 then I have to wait 15 more seconds. Even a 240p video, it does it so, it is clearly not a tolerable bug. I don't have a work around so far (tried everything from reset to wipe the phone and reinstall all the apps).
My Device is an iPhone 6+ with iOS 8.1 (yes, it is not just exclusive to the iPhone 5S. I assume it also effects the iPhone 6 based on technical specifications).

Weblogic security authentication; question to interact with the realm

Hi, I have a quick question about weblogic security authentication....
We are using weblogic 81sp3. We have user-group info in an Novell eDirectory LDAP server.
Currently, a Novell Authenticator provider is configured under : Security > Realms > myRealm > Providers > Authentication This tells Weblogic from where to get the user and groups. Weblogic caches this information of the logged on users for certain time ( example : 60 secs ) after which it cleans the cache for all inactive users. We want to interact with the Weblogic cache. Add more user profile information to this cache and use it in our application .
Does somebody know how to programmatically interact with Weblogic user-group cache - read , write , update and delete user-group info in cache and control time to live for the cache ?

already checked
TTLCache class which weblogic provides. But they seem to depracetd it
help ?

Http authentication failing on all sites, does not even prompt me for user/pass

Hi,
After an apt-get update, sites that use HTTP authentication do not prompt for credentials and go straight to HTTP:401. It is only affecting this browser, others have no issues. I also updated a FF in Windows, no issues there after the update.

Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

HTTPS Authentication

Hi,
I am searching for a good design to implement the HTTPS authentication and data retrieval using BPEL process. Here is my uses case.
I have a csv file on a external server, this file requires authentication, the moment I click the link https://host.com/2009/03/12/Test.csv, it will ask us to enter the ID and password and upon user verification we can save or open the file.
Now I want to use an adapter or partner link in BPEL to read the file providing the user details. What would be the best approach to implement this. If any one has pointers please help me.
Thanks
Ramana.

Hi Ramana,
The whole bunch of the SSL(HTTP/S) and ecryption policies are well documented at : http://download.oracle.com/docs/cd/B31017_01/integrate.1013/b28982/security.htm
Also, since you want to make your application HTTPS enabled then you need to follow : http://download.oracle.com/docs/cd/B25221_04/core.1013/b25209/part4.htm#BEHBDFGD
Hope this helps!
Cheers
Anirudh Pucha
Edited by: Anirudh Pucha on Mar 11, 2009 7:02 PM

Weblogic HTTP Authentication on 11g webservice

Similar Messages

Maybe you are looking for