Weblogic installation in aix

hi
this is prabha,
i am new to weblogic, how to install the weblogic in AIX(any verstion), plz send ASAP.

You can go to weblogic documentation where installation on various platforms are properly documented. Please follow that,
http://download.oracle.com/docs/cd/E17904_01/wls.htm
Installation guide is here:
http://download.oracle.com/docs/cd/E17904_01/doc.1111/e14142/toc.htm

Similar Messages

Weblogic installation with IBM JDK

Hi,
We are planning to install Oracle Fusion Middleware components 11gR1 (11.1.1.6+) on IBM AIX Power 64 Bit servers. When i checked the certification matrix IBM JDK 7 SR3+ IV33133 is the certified version of JDK for weblogic installation.
Please help me on how to exactly get/download the IBM JDK 7 SR3+ IV33133? I have checked the IBM JDK downloads page and not exactly getting how can we get SR3+ IV33133?
Best Regards,
Kartheek

Hi Prakash,
I guess the '+' sign in the IBM JDK 7 SR3 + IV33133 is bit tricky. I doubt whether it is IBM JDK 7 SR3 added with IV33133.
I have spent quite some time on this JDK installation and got to know that the 3rd party products that are certified to run only on specific versions of IBM's Java for AIX can be downloaded from IBM Java for ISVs download page.
Here are steps that i have followed to download the IBM JDK 7 SR3+ IV33133
1.Go to the IBM Java for ISVs download site at the following URL:
https://www14.software.ibm.com/webapp/iwm/web/preLogin.do?lang=en_US&source=swg-ibmjavaisv
2.Log in using your IBM ID and password.
3.Enter the associated Access Key MJ3D7TQGMK in the IBM Java for ISVs page
4.Click on submit
5.On the IBM SDK Interim Fixes (iFix) for Oracle page you will see the below JDK versions that are exactly matching the one provided in the certification matrix.
pap6470sr3ifx-20121213_01 (SR3+IV33133)
Java7_64.0.0.61.tar.gz (115 MB)
pap6470sr3ifx-20121213_01 (SR3+IV33133)
pap6470sr3ifx-20121213_01-sdk.tar.Z (184 MB)
6.installed the JDK
Please can you confirm that this procedure is correct?
Best Regards,
Kartheek

Oracle 11g R2 RAC installation on AIX

hi,
I wana setup Oracle 11g R2 RAC on Ibm with AIX. Is there any good document or cookbook explaining step by step procedure for the installation...I'll be thankful
thanx

Hi;
Please check below links which is mention about 11gR2 Rac installation on AIX
11gR2 RAC installation in AIX help urgent
Re: 11gR2 RAC installation in AIX help urgent...!!!!
11gR2 RAC Installation Manual (with ASM+Rawdevice)
http://www.goodus.com/knowledge_pds/%EA%B8%B0%EC%88%A0%EB%85%B8%ED%8A%B8_11gR2_RAC_Guide.pdf
Regard
Helios

Oracle DB 9201 installation on AIX 5L with 32 bit architecture!!

Hi,
I have installed AIX 5L on 32 bit kernel machine.
Thereafter I have installed Oracle 9.2.0.1 Database!!
But whenever I am running sqlplus or listener it gives me an error that "you cannot run 64 bit application on 32 bit machine"
but I am able to run DBCA or NETCA command from oracle home directory & it runs properly. It also create & configure the listener but due to the above mismatch it could not start!!
Can any one help !!
Regards,
Indraneel

Same thread into Installation Forum : Re: Oracle DB 9201 installation on AIX 5L with 32 bit architecture!!
Nicolas.

Reconfigure existing OIM on fresh weblogic Installation

Hi,
My OIM 9.1.0.1 is configured on WebLogic 10.3 but I am not able to start the weblogic server. It hangs after showing the STARTING Message; not getting error
message also. So, is there any way in which I can reconfigure the existing OIM on fresh Weblogic installation. If yes, then kindly help.
Cheers,
Sunny

Are u able to login to the Weblogic Admin Console by using the URL
http://<hostname>:7001/console.
If Yes, then go to the deployed Applications and repdeply xellerate Application.
If No, then its time to reinstall Weblogic and OIM

Java upgrade over solaris 10 x86 32 bit for weblogic installation

Hi All I need to install weblogic over solaris 10 x86, for that i need following configuration :-
JDK Sun Java 2 JDK 6.0 Update 05 with the Java HotSpot™ Client and Server
VMs (32-bit) and all later service packs of 6.0
How can i update this java over solris or is it actually required.Can someone please help??
Sharad

I have solaris 10 x86 32 bit installed over my system and i have got this weblogic installer :-
Oracle WebLogic Server 11gR1 (10.3.4) Generic and Coherence V24338-01 1.1G
Would it be gud. or i would need something else. Actually thing is I am having windows machines over which i have installed solaris 10 x86 running over VM ware, i also upgraded java to 7 update. Now would it go fine with the mentioned file or I am going wrong somewhere,
Please suggest as i am running out of resources here.
Thanks in advance.

Mulitple WebLogic Installations One Server

Planning to install Oracle Forms Builder 11g on existing server for all developers to use. Already have a WebLogic and Fusion MIddleware Forms installation on the server for the ERP system we use, but want a separate installation for developers with different "user" so they can access and use the Forms builder. I do not want them to have access to current application or user. Is it advisable or possible to do a completely new and separate WebLogic/Forms installation with different oracle user on the same server?
Have been researching this but all I seem to find is that I can create new domains in the same MIddleware home, but want a completely separate WebLogic installation for security reasons.
Thank you
Curt

Hi Curt,
You can install a new Middleware home (with fresh install of weblogic) for your Oracle Forms Builder 11g on the same server.
You can use different Oracle user for this.
So in this case everything is different, Middleware home , oracle home and even the domain.
Thanks,
Sharmela

10g rac deinstall and 11.2.0.3 rac installation on aix 6.1

Hi,
I have to perform deinstallation of 2 node 10g rac on aix and on same setup i need to install 2 node 11.2.0.3 rac on aix 6.1.
As being a newbie in this please guide me from where to find the exact documentation for the same.
Also, In linux we need to install oracleasm rpm, In AIX do we need the same?
Thanks.

Following are the OS requirement for Oracle 11gr2 installation on AIX
AIX 5L V5.3 TL 09 SP1 ("5300-09-01") or higher, 64 bit kernel (Part Number E10854-01)
AIX 6.1 TL 02 SP1 ("6100-02-01") or higher, 64-bit kernel
AIX 7.1 TL 00 SP1 ("7100-00-01") or higher, 64-bit kernel
Following can be confirmed from metalink ID 169706.1

WebLogic Installation Log File

Where is the installation log file after WebLogic installation?
I am installing WebLogic6.1. Can I specify where the installation log file should
go? Where is it anyway?
I searched few directories do not see where it placed the installation lo file.

No, not as I know of. If you are experiencing some problems and you really want to
find more information about a problematic installation, you may do the following to
generate the debug output and you can send that debug info to me:
Windows: pressing down control key at the beginning of the installation until a
debug console window pops up.
Unix Installer ( .bin files): set LAXDEBUG=true in your environment before starting
your installation. tee or script the output to a file:
export LAXDEBUG=true
sh weblogic610.bin -i console 2>&1 | tee buildlog
Pure java installer (.zip file):
touch ia_debug
$JAVA_HOME/java -cp weblogic610.zip -i console 2>&1 | tee buildlog
The upgrade installer should have a clear log to tell you what went wrong in a
installation or uninstallation process. And the installation/uninstallation process
would be rolled back if anything went wrong. The exception is that if you manually
stoped it in some way, which way may catch and process later.
-Dan
Ashique wrote:
Yes, I am trying to do a full installation (in silent mode).
Every software has an installation log. Is that not pretty much standard?
How come weblogic does not have log? If something goes wrong during silent
installation, I would like to see a log file.
Are you sure that there is absolutely no log file for a full installation?
Dan Bai <[email protected]> wrote:
There is no log file for a full installer installation.
The log file for an servicepack upgrade installation lives under $BEA_HOME/logs.
Look into the directory corresponding to that servicepack.
Are you experiencing any problems with the full installer?
-Dan
Ashique wrote:
Where is the installation log file after WebLogic installation?
I am installing WebLogic6.1. Can I specify where the installation logfile should
go? Where is it anyway?
I searched few directories do not see where it placed the installationlo file.

Xlc file Required for Oracle Product Installation on AIX 6.1

Hi All,
I am trying to install Oracle 11g Forms & Reports on AIX 6.1 [TL12].
I have installed JDK and Weblogic Server without any Errors.
When we reach 93% on software Alone installation with 11g Forms & Reports, we got some error
ERROR IN INVOKING TARGET 'RELINK' OF MAKEFILE '///INS_PRECOMP.mk'We raised a SR for this Error, Oracle Support given one solution to follow.
>
Yes, there is a known issue with AIX OS.
Before starting the Oracle Fusion Middleware 11g Classic installation on IBM AIX, check for "xlc" availability on the system. It should be present either under /usr/bin/ or under >/usr/vac/bin directory.
If /usr/vac/bin/xlc is present, create the following symlink as root user:
# ln -s /usr/vac/bin/xlc /usr/local/bin/xlc
If /usr/bin/xlc is present, create the following symlink as root user:
# ln -s /usr/bin/xlc /usr/local/bin/xlc
Please clean up the failed install and start new install once you follow the above steps and let me know the results.But Unfortunately in our AIX 6.1 Box we dont have any 'XLC', in any of the folder in entire file system.
What is this XLC ?? if that is not available how to create the SYMLINK ?
Kindly Some one Advice me.
Regards,
Paja

Hi Paja,
I would recommend you o post this thread under application server/weblogic forum.
Arik

11gR2 RAC installation in AIX fails while running root.sh on node2

Hi
We are in the process on installing 11gR2 RAC on AIX 6.1
But the installation is failing on node 2while running root.sh with the following error.
DiskGroup DATA creation failed with the following message:
ORA-15018: diskgroup cannot be created
ORA-15017: diskgroup "DATA" cannot be mounted
ORA-15003: diskgroup "DATA" already mounted in another lock name space
Configuration of ASM failed, see logs for details
Did not succssfully configure and start ASM
CRS-2500: Cannot stop resource 'ora.crsd' as it is not running
CRS-4000: Command Stop failed, or completed with errors.
Command return code of 1 (256) from command: XXXXX/grid/bin/crsctl stop resource ora.crsd -init
Stop of resource "ora.crsd -init" failed
Failed to stop CRSD
Please help
Regards

HI,
the second node (second root.sh) should not want to "create" the diskgroup data, since it is already there.
This pretty much sounds like you tried to start both root.sh (on the first node and on the second node) at the same time, not waiting for it to finish on the first node.
It is important, that before you start the root.sh on the second node, it has to be finished successfully on the first node for the cluster to update the information.
Sebastian

Solution Manager 4.0 Installation Error AIX 5.3 / Oracle 10.2.0.1

Hi All,
I am facing an error in the installation step of Solution Manager 4.0 on AIX 5.3 / Oracle 10.2.0.1
Hostname : INXXXXSAPIDES
The ABAP instance is not coming up and the Installation failed.I tried to bring up the instance manually.But was not successful.
Workprocess traces :
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0x7000001732fa070
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0x7000001732fa470
S using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2176 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 5720kb, dir_size: 5664kb.
A Attached to PXA (address 0x7000001e0000000, size 150000K)
A abap/pxa = shared unprotect gen_local
A PXA INITIALIZATION FINISHED
A -PXA--
A
Signal 6 encountered.
=> 64 bit R/3 Kernel
=> 64 bit AIX Kernel
=> Heap limit = unlimited
=> Stack limit = unlimited
=> Core limit = unlimited
=> File size limit = unlimited
=> Heap address = 0x0x113a1f5c0
=> Stack address = 0xfffffffffffded0
=> Stack low = 0xfffffffffffb5e0
=> Stack high = 0xffffffffffff810
=> Stack Trace:
 pthread_kill() at 0x900000000490650
 praise() at 0x900000000490070
 raise() at 0x900000000059624
 abort() at 0x900000000084a90
TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M ThErrPrivHandle: set th_errno (11)
M Entering ThReadDetachMode
M *** ERROR => ThIErrHandle: bad value for th_act_em_hdl (8), detach T0/M0 [thxxhead.c 10721]

DEV_DISP 
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 102
Release check o.K.
Sat Jul 28 22:41:18 2007
ERROR => W0 (pid 442462) died [dpxxdisp.c 14319]
ERROR => W2 (pid 635048) died [dpxxdisp.c 14319]
ERROR => W3 (pid 598164) died [dpxxdisp.c 14319]
ERROR => W4 (pid 770084) died [dpxxdisp.c 14319]
ERROR => W5 (pid 815142) died [dpxxdisp.c 14319]
ERROR => W6 (pid 761862) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xbf --> 0xbd
ERROR => W7 (pid 671804) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xbd --> 0xb9
ERROR => W8 (pid 630958) died [dpxxdisp.c 14319]
ERROR => W9 (pid 622786) died [dpxxdisp.c 14319]
ERROR => W10 (pid 549070) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xb9 --> 0xb1
ERROR => W11 (pid 544802) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xb1 --> 0xa1
ERROR => W12 (pid 508062) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xa1 --> 0x81
Sat Jul 28 22:41:55 2007
ERROR => W1 (pid 802934) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0x81 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
stderr1
Command: dw.sapSM4_DVEBMGS10
 pf=/usr/sap/SM4/SYS/profile/SM4_DVEBMGS10_INSISCSAPIDES
ICM up and operational (pid: 675892) ***
timezone value meaningless. BSD libraries linked?
work process W1 died => ThSigHandler: signal
timezone value meaningless. BSD libraries linked?
work process W2 died => ThSigHandler: signal
timezone value meaningless. BSD libraries linked?
work process W12 died => ThSigHandler: signal
timezone value meaningless. BSD libraries linked?
.timezone value meaningless. BSD libraries linked?
work process W4 died => ThSigHandler: signal
work process W8 died => ThSigHandler: signal
timezone value meaningless. BSD libraries linked?
Can someone please help me in this.
Thanks
Siva
Message was edited by:
 siva sakthi

I found the solution..
There was a a problem in the timezone setting for the server.After changing it and rebooting it worked perfectely.

Dialog instance installation on AIX

Hi,
I am palnning to install Dialog instance of ECC5.0 with oracle database on AIX5.3
OS.
I am having some queries.
1: what file system is requied for dialog instance on AIX ( both for oracle and application)
2: whether /sapmnt and /usr/sap/trans I have to make as NFS or not.
3: whether oracle client installation it will ask in between of dialog installation if not then when it will ask.
4: What about oracle patch installation.
Please reply its urgent.
Thanks
Manoj

01. Yes
Only 3 Mounts you require ( assuming local Kernel Upgrade)
/usr/sap/trans
/sapmnt/<SID>/global
/sapmnt/<SID>/profile
02. Please check 1st Point answer
03. NW2004s demands for Oracle Client installation cd. check in NW2004.
04. Patch is for Oracle Server ( not for client)
Rgds
PR

ABAP Engine Installation on AIX Cluster

Dear All,
I want to install ABAP Engine on Clustered IBM Server environment with O.S. AIX and Oracle DB. I am new to AIX and Cluster environment. Can anyone help me with the installation guide, or any related documents in this regard will be helpful..
If possible please mail me the procedure / guide on [email protected]
thanks.
Prashant.

Hi,
The required documents for installation are available on http://service.sap.com/instguides
Regards,
Siddhesh

ASM installation on AIX?

We are installing Oracle 10gR2 on a new AIX server, we want to use ASM for a single instance on this server. I am told that you need to install ASM instance first and I see some threads that elude to an option from the Orcle Installer to "install and configure ASM only" .
When I click on the "type of install", running the installer from the Disk1 ./runinstaller - I get only two options, enterprise edition or standard edition.
If I look at the "custom" install option it shows the ability to "configure for ASM" but I'm thinking that option would be used to configure an instance to USE an already up and running ASM instance.
How do I install JUST an ASM instance, or does the installer actually create the ASM instance during the custom install if one does not exist?

On the initial screen choose those options that say "Advanced" or "Software Only" or similar things: It is there.

Weblogic installation in aix

Similar Messages

Maybe you are looking for