Weblogic installation

Hi
I need a clarification regarding installation
can i install two different versions of weblogic (6.0 and 6.1) on the same server
sun(sparc) and run both of them at the same time.
Thanx
Ranga Rao

Hi Ranga,
Yes you can, say you install 6.0 in
/opt/bea
this will create a directory /opt/bea/wlserver6.0......
You can then install 6.1 in /opt/bea and it will use
/opt/bea/wlserver6.1......
Regards
Gareth
"Ranga Rao" <[email protected]> wrote in message
news:3c57f929$[email protected]..
>
Hi
I need a clarification regarding installation
can i install two different versions of weblogic (6.0 and 6.1) on the sameserver
sun(sparc) and run both of them at the same time.
Thanx
Ranga Rao

Similar Messages

Reconfigure existing OIM on fresh weblogic Installation

Hi,
My OIM 9.1.0.1 is configured on WebLogic 10.3 but I am not able to start the weblogic server. It hangs after showing the STARTING Message; not getting error
message also. So, is there any way in which I can reconfigure the existing OIM on fresh Weblogic installation. If yes, then kindly help.
Cheers,
Sunny

Are u able to login to the Weblogic Admin Console by using the URL
http://<hostname>:7001/console.
If Yes, then go to the deployed Applications and repdeply xellerate Application.
If No, then its time to reinstall Weblogic and OIM

Java upgrade over solaris 10 x86 32 bit for weblogic installation

Hi All I need to install weblogic over solaris 10 x86, for that i need following configuration :-
JDK Sun Java 2 JDK 6.0 Update 05 with the Java HotSpot™ Client and Server
VMs (32-bit) and all later service packs of 6.0
How can i update this java over solris or is it actually required.Can someone please help??
Sharad

I have solaris 10 x86 32 bit installed over my system and i have got this weblogic installer :-
Oracle WebLogic Server 11gR1 (10.3.4) Generic and Coherence V24338-01 1.1G
Would it be gud. or i would need something else. Actually thing is I am having windows machines over which i have installed solaris 10 x86 running over VM ware, i also upgraded java to 7 update. Now would it go fine with the mentioned file or I am going wrong somewhere,
Please suggest as i am running out of resources here.
Thanks in advance.

Weblogic installation with IBM JDK

Hi,
We are planning to install Oracle Fusion Middleware components 11gR1 (11.1.1.6+) on IBM AIX Power 64 Bit servers. When i checked the certification matrix IBM JDK 7 SR3+ IV33133 is the certified version of JDK for weblogic installation.
Please help me on how to exactly get/download the IBM JDK 7 SR3+ IV33133? I have checked the IBM JDK downloads page and not exactly getting how can we get SR3+ IV33133?
Best Regards,
Kartheek

Hi Prakash,
I guess the '+' sign in the IBM JDK 7 SR3 + IV33133 is bit tricky. I doubt whether it is IBM JDK 7 SR3 added with IV33133.
I have spent quite some time on this JDK installation and got to know that the 3rd party products that are certified to run only on specific versions of IBM's Java for AIX can be downloaded from IBM Java for ISVs download page.
Here are steps that i have followed to download the IBM JDK 7 SR3+ IV33133
1.Go to the IBM Java for ISVs download site at the following URL:
https://www14.software.ibm.com/webapp/iwm/web/preLogin.do?lang=en_US&source=swg-ibmjavaisv
2.Log in using your IBM ID and password.
3.Enter the associated Access Key MJ3D7TQGMK in the IBM Java for ISVs page
4.Click on submit
5.On the IBM SDK Interim Fixes (iFix) for Oracle page you will see the below JDK versions that are exactly matching the one provided in the certification matrix.
pap6470sr3ifx-20121213_01 (SR3+IV33133)
Java7_64.0.0.61.tar.gz (115 MB)
pap6470sr3ifx-20121213_01 (SR3+IV33133)
pap6470sr3ifx-20121213_01-sdk.tar.Z (184 MB)
6.installed the JDK
Please can you confirm that this procedure is correct?
Best Regards,
Kartheek

Mulitple WebLogic Installations One Server

Planning to install Oracle Forms Builder 11g on existing server for all developers to use. Already have a WebLogic and Fusion MIddleware Forms installation on the server for the ERP system we use, but want a separate installation for developers with different "user" so they can access and use the Forms builder. I do not want them to have access to current application or user. Is it advisable or possible to do a completely new and separate WebLogic/Forms installation with different oracle user on the same server?
Have been researching this but all I seem to find is that I can create new domains in the same MIddleware home, but want a completely separate WebLogic installation for security reasons.
Thank you
Curt

Hi Curt,
You can install a new Middleware home (with fresh install of weblogic) for your Oracle Forms Builder 11g on the same server.
You can use different Oracle user for this.
So in this case everything is different, Middleware home , oracle home and even the domain.
Thanks,
Sharmela

WebLogic Installation Log File

Where is the installation log file after WebLogic installation?
I am installing WebLogic6.1. Can I specify where the installation log file should
go? Where is it anyway?
I searched few directories do not see where it placed the installation lo file.

No, not as I know of. If you are experiencing some problems and you really want to
find more information about a problematic installation, you may do the following to
generate the debug output and you can send that debug info to me:
Windows: pressing down control key at the beginning of the installation until a
debug console window pops up.
Unix Installer ( .bin files): set LAXDEBUG=true in your environment before starting
your installation. tee or script the output to a file:
export LAXDEBUG=true
sh weblogic610.bin -i console 2>&1 | tee buildlog
Pure java installer (.zip file):
touch ia_debug
$JAVA_HOME/java -cp weblogic610.zip -i console 2>&1 | tee buildlog
The upgrade installer should have a clear log to tell you what went wrong in a
installation or uninstallation process. And the installation/uninstallation process
would be rolled back if anything went wrong. The exception is that if you manually
stoped it in some way, which way may catch and process later.
-Dan
Ashique wrote:
Yes, I am trying to do a full installation (in silent mode).
Every software has an installation log. Is that not pretty much standard?
How come weblogic does not have log? If something goes wrong during silent
installation, I would like to see a log file.
Are you sure that there is absolutely no log file for a full installation?
Dan Bai <[email protected]> wrote:
There is no log file for a full installer installation.
The log file for an servicepack upgrade installation lives under $BEA_HOME/logs.
Look into the directory corresponding to that servicepack.
Are you experiencing any problems with the full installer?
-Dan
Ashique wrote:
Where is the installation log file after WebLogic installation?
I am installing WebLogic6.1. Can I specify where the installation logfile should
go? Where is it anyway?
I searched few directories do not see where it placed the installationlo file.

Weblogic Installation gets managed server of old installation

Hi. In my CentOS I had a weblogic 10.3.3.0 with three managed servers, then I unistalled it, delete the folder of installation manually for the files that the uninstaller didn't erase and then I installed again weblogic (jdevstudio11113install.bin) with new managed servers and when I want to start them up it tells me that it doesn't exist that the only ones that exist are the old ones I had in the previous installation. So I assume they are in a hidden file that I had to remove or update with new managed servers, which sounds strange because that should be deleted during uninstall process. Anyway any hint would be highly appreciated. Greetings.

From what I understand about your problem you have a domain - Admin server running on one physical machine and Managed server running on another physical machine, when stopping the Managed server its getting hung at suspending state, which in turn is causing Admin server slow down in response or hang.
          Please confirm on this how are you stopping and starting your managed server
          make sure that you do not use localhost when creating domains which spread across more than one physical machine.
          Make sure that your Adminserver & Managed server have address as hostname's of physical server instead of Localhost
          You should be starting / stopping Managed server something like this
          startManagedWeblogic.sh -url t3://AdminserverHostName:PortNo <servername>
          stopManagedWeblogic.sh -url t3://AdminserverHostName:PortNo <servername>
          Let me know if you still have the problem.
          Weblogic Consultant

Java Path in weblogic Installation !

Hi all,
I am in the process to install 11g Forms and Reports on Windows 2008R2 Server .
for that these are the software's i have downloaded.
1) jdk-6u25-windows-x64
2) wls1035_generic
3) Forms and Reports 11.1.1.2 [64bit]
At first i have installed JDK,then i tried to install Weblogic server 10.3.5, but on the JDK selection i have not seen any JDK bundle.. even without selecting this i cant move to the next page.
Could anyone tell me the version of JDK i have installed is correct, and if its correct then what i have to do in the selection of JDK in weblogic server installation ?
Do i need to choose a the local JDK path from the below menu,, even i tried to locate the file but which file i have to choose i dont know,, kindly expecting experts help in this.
Regards
Hamid
Kindly review this also
In this link http://docs.oracle.com/cd/E21764_01/doc.1111/e14142/guimode.htm#BABHJJIH under Installation screens --> 6th screen ??
As per this document, i have not done any previous weblogic server installation in this server so its a fresh installation,,kindly let me know i have chosen the correct JDK ??
Edited by: Hameed on Mar 9, 2012 11:19 PM
(*************************************SOLVED*******************************************)
Edited by: Hameed on Mar 9, 2012 11:46 PM

Sorry

Weblogic installation abort - please HELP

Hi
I have a situation where Weblogic 6.1 sp2 installation failes in NT server. Only
one server is affected, I think there is something wrong with NT setup. It simple
aborts after it gets to the middle of the install without any warnings or messages.
Can anyone suggest anyghing, any direction to look at.
Thanks in advance...

I suggest you revert to the original memory settings. Your changes have apparently created multiple values for memory:
...-Xms256m -Xmx512m ... weblogic.policy -Xms512m -Xmx512m -XX:Compile...r.enable=true -Xms512m -Xmx512m ...

Weblogic installation fatal error

this is my first time so i don't know anything about weblogic so pls bear with me.
i downloaded wls1032_win32.exe (i hope this is the correct one to get), but during installation a fatal error occurs, 49% of installation, and when i checked the installer it is at "*configuring workshops*" if i remember it right. its a fatal error, not much info what caused it. i sent the same installer to a different pc, and it worked at that pc. not sure what is the problem, any ideas?
im using windows xp sp2
i also downloaded oepe111130_wls1032_win32.exe which includes eclipse if im not mistaken. please help, i opened all related post(24 pages) on this part of the forum, and nothing similar.
thanks in advance

was just about to post.
i looked around the documentation, i found out how to create a log using a command line, i did that and looked at the error logged. this is what i found
2553-01-07 14:35:09,719 ERROR [touch] com.bea.plateng.wizard.WizardController - Uncaught Exception
java.lang.IllegalArgumentException: Negative time
     at java.io.File.setLastModified(File.java:1258)
     at com.bea.plateng.common.util.Touch.touchFile(Touch.java:99)
     at com.bea.plateng.common.util.Touch.touchFile(Touch.java:96)
     at com.bea.plateng.common.util.Touch.touch(Touch.java:79)
     at com.bea.plateng.wizard.silent.tasks.TouchTask.execute(TouchTask.java:268)
     at com.bea.plateng.wizard.silent.tasks.AbstractSilentTask.run(AbstractSilentTask.java:28)
     at java.lang.Thread.run(Thread.java:619)
the highlighted part gave me an idea, i just remembered that my pc is set to THAI, due to one of my projects. i changed it back then it worked.
would be nice if the installer made a log even without the command line. was able to figure it out but still thank you very much for helping. kudos, you'll be rewarded regardless :) thanks

Java Change After WebLogic Installation

Hello,
I've installed WebLogic 10.3.6 with FMW 11.1.1.6 running on OEL 6.3. I'm running Java 1.7.0_5. I'm trying to deploy a vendor's web application. The deployment is fine. However, when I try to run the web application, I get various java errors. The vendor says they don't yet support Java 7.
If I uninstall Java 7 and install Java 6 build 33 (or 35), how can I reconfigure WebLogic to use the "new" jdk? Can I rerun the wls1036_generic.jar and just select the "new"jdk? Or do I have to uninstall WebLogic, change Java versions then reinstall WebLogic?
Thanks,
Mike Lamar
Baylor University

Hi Mike,
You can reframe your Java home with in script file while will reflect all the changes.
for specific to domain check with in setDomainEnv.sh or .cmd file or to entire installation check with commonEnv.sh or .cmd file with in %WLS_Home%/ common / bin/
Still you get any error let me know.
Regards,
Kal

Seperate OBIEE installation and Weblogic Installation

Hi,
Our requirement is to setup the HA system in the Production for the OBIEE. We have Admin server as active-passive on the 2 OBIEE instances.
We trying to setup the high availability of the Admin server as per the Oracle Enterprise Deployment guide. If I setup that and manually failover the Admin server the user cannot login if the Admin server is migrated to second application server.
So our next option is to install the weblogic on the NAS shared storage and scale out the OBIEE components on the 2nd Application server so that Active-Passive Admin server can access the same settings on the shared storage. So the question is it possible to separate the weblogic and OBIEE installation directories separately in order to achieve high availability.
Thanks:
Apurv.

The URL will be exactly the same as a Windows installation but will have your Unix server name. You will need to learn how to start and stop the OBIEE services and OC4J in Unix. This is pretty well documented on the Infrastructure Installation and Configuration Guide.

Weblogic installation in aix

hi
this is prabha,
i am new to weblogic, how to install the weblogic in AIX(any verstion), plz send ASAP.

You can go to weblogic documentation where installation on various platforms are properly documented. Please follow that,
http://download.oracle.com/docs/cd/E17904_01/wls.htm
Installation guide is here:
http://download.oracle.com/docs/cd/E17904_01/doc.1111/e14142/toc.htm

Weblogic Installation Problems

Hello
I have downloaded the net-installer to install only some parts of the Bea Weblogic
platform. However, when I want to start zhe installation process, I get following
error message:
current locale is not supported in X11, locale is set to CX locale modifiers are
not supported, using defaultUnable to instantiate GUI, defaulting to console mode.
** Error during execution, error code = 11.
I have tried to set the locale (with export LANG="X") to C, en_US, de_DE, but
it does not help.
regards, Volkher Scholz

What operating system? The platform support page for WebLogic Server is
located at:
http://www.weblogic.com/platforms/index.html
This page has the latest and greatest information on the platforms that
WebLogic is certified and supported on.
Thanks,
Michael
Michael Girdley
Product Manager, BEA WebLogic Server
BEA Systems Inc
Learning WebLogic? Buy the book.
http://www.learnweblogic.com/
"Vetra" <[email protected]> wrote in message
news:3a6c749e$[email protected]..
While doing the Weblogic 5.1 server setup on Pentium 4 machines following
memory read error occurs when almost 100% of the setup operation is
completed.
"The instruction at "0x500bf974" referenced memory at "0x00000e7f". The
memory could not be "read".
Click on OK to terminate the program
Click on CANCEL to debug the program
Any Suggestions....?

Shared Services / WebLogic Installation Problem

Hi,
I'm starting an install of 11.1.1.3 on a Windows 2003 EE R2 and have run into problems with the automatic deployment of the HSS application server. It appears that the config tool cannnot "reach" or start the WebLogic admin console.
Details:
WebLogic 9.2 MP3
hyperion has been created as a WL Admin
Node Manager is running on port 5556
Any thoughts or suggestions would be welcome.
Thanks
Mark

Are you just trying to do a standard automatic deployment? If so, the node manager doesn't really have much to do with that -- has anything been deployed on this box already?
The first thing the config tool is going to do is deploy the admin server, then Shared Services; has the admin server itself been deployed at this point?
Check your Hyperion Home directory and see if there's a .\deployments\Weblogic9 directory; if there is, go to .\bin under there, and look for 'startWebLogic.cmd'.
Before running that file, open a command prompt and type:
netstat -an | findstr 7001
7001 is the admin server port; if it's already running, you'll see a LISTEN entry there. If you don't see a LISTEN, run startWebLogic.cmd, wait for it to start, then run the above netstat command in another command prompt. If you now see a LISTEN command, try logging into the admin server:
http://<wlhost>:7001/console
Login is just 'hyperion'.
If that works, great! Try your Shared Services deployment again.
If there is no HYPHOME\deployments directory (this is created when the admin server is deployed), clear out the config tool log (HYPHOME\logs\config\configtool.log), try the deployment again, and then copy the pertinent sections here.
Remember also, the config tool -- in an automatic deployment scenario -- is going to create its own weblogic profile, called hyslProfile. If you already have existing weblogic domains running on this box, Hyperion isn't going to use them -- if you do, and they aren't in use by anything, it would probably be best to just remove them. It's possible that if there's another non-hyslProfile admin server running on :7001 on that machine, the config tool could be getting confused.
Edited by: Dr. Bloodmoney on Jul 8, 2011 1:07 PM

Weblogic installation

Similar Messages

Maybe you are looking for