Weblogic Integration 2.1 sp2

When I run the wlintegration21sp2_win.exe install script, nothing happens. No warning, no errors, just a small splash screen, then nothing.

Edith Barra wrote:
We have being dealing with this problem for a long time and we haven´t been able
to find a solution, so we would appreciate your helping us with this.
We have Weblogic Server 6.1 SP3 and Process Integration 2.1 SP2. We are working
with Sybase 12.004 and JConnector 5.5. The following is the message that we have
been receiving :
deploying application wlpi-ejb.jar:
Unable to deploy EJB: BusinessOperationRO from wlpi-ejb.jar: weblogic.
utils.AssertionError: ***** ASSERTION FAILED *****[ Table: BUSINESSOPERATION Full
Table Check failed, but table all columns were found! ]
Any idea?
EdyHi. This is not a jdbc question, but rather an EJB issue, so you should definitely post your
question to the EJB newsgroup. I have looked as far as identifying that the exception
you see is thrown by:
ejb20.utils.TableVerifier.verifyTableAndColumnsExist(), and oddly, this is after
every individual test passed but the initial call to checkTableAndColumns()
failed.
Joe Weinstein at BEA

Similar Messages

Help: Why cann't I install WebLogic Integration?

Hi,
I have installed WebLogic Server 6.0 on e:\bea (Windows 2000). When I
install WebLogic Integration 2.0 sp2, I get the message "WebLogic Server 6.0
is a prerequisite for this installion, you do not seem to have it installed
to e:\bea". How can I do?

I have the same problem like yang.
I use 6.0.sp2 !
Any ideas?
Maik
"Christo" <[email protected]> wrote:
Is it 6.0 SP2?
"yang songqi" <[email protected]> wrote in message
news:[email protected]..
Hi,
I have installed WebLogic Server 6.0 on e:\bea (Windows 2000).When I
install WebLogic Integration 2.0 sp2, I get the message "WebLogic Server6.0
is a prerequisite for this installion, you do not seem to have itinstalled
to e:\bea". How can I do?

Problem on starting weblogic integration 2.1

I would like to ask you for advise/information on the start-up of the
weblogic integration 2.1.
I have tried to setup the weblogic integration 2.1 (sp1) at home, but
without any success yet.
There was nothing helpful that I can found in the BEA knowledge base.
My weblogic server 6.1 (sp2) starts up alone normally and working fine, and
I have followed
all the steps in the installation document, including create and setup the
database.
I have also executed the setenv.cmd and make sure the domain in use is
"wlidomain".
When I try to start up the weblogic integration 2.1, it give me the
following exception.
C:\bea\wlintegration2.1\config\wlidomain>startWeblogic.cmd
The WebLogic Server did not start up properly.
Exception raised:
java.lang.ArrayIndexOutOfBoundsException
at com.bea.utils.misc.ProcessUtil.base64ToBytes(ProcessUtil.java:552)
at com.bea.utils.misc.Process.validate(Process.java:1231)
at com.bea.utils.misc.Process.isValidSignature(Process.java:518)
at com.bea.utils.misc.ProcessManager.memCheck(ProcessManager.java:647)
at weblogic.t3.srvr.T3Srvr.checkAccess(T3Srvr.java:286)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:343)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
Thanks in advance, and looking forward for your reply soon.
Best Regards,
Matthew Ho

Hi.
Try posting this on either weblogic.integration.interest or
weblogic.integration.developer.
Thanks,
Michael
Matthew Ho wrote:
I would like to ask you for advise/information on the start-up of the
weblogic integration 2.1.
I have tried to setup the weblogic integration 2.1 (sp1) at home, but
without any success yet.
There was nothing helpful that I can found in the BEA knowledge base.
My weblogic server 6.1 (sp2) starts up alone normally and working fine, and
I have followed
all the steps in the installation document, including create and setup the
database.
I have also executed the setenv.cmd and make sure the domain in use is
"wlidomain".
When I try to start up the weblogic integration 2.1, it give me the
following exception.
C:\bea\wlintegration2.1\config\wlidomain>startWeblogic.cmd
The WebLogic Server did not start up properly.
Exception raised:
java.lang.ArrayIndexOutOfBoundsException
at com.bea.utils.misc.ProcessUtil.base64ToBytes(ProcessUtil.java:552)
at com.bea.utils.misc.Process.validate(Process.java:1231)
at com.bea.utils.misc.Process.isValidSignature(Process.java:518)
at com.bea.utils.misc.ProcessManager.memCheck(ProcessManager.java:647)
at weblogic.t3.srvr.T3Srvr.checkAccess(T3Srvr.java:286)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:343)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
Thanks in advance, and looking forward for your reply soon.
Best Regards,
Matthew Ho--
Michael Young
Developer Relations Engineer
BEA Support

Location for dll files in weblogic server 6.1 sp2

"where to keep *.dll files in weblogic server 6.1 sp2". Application is deployed on weblogic server 6.1 sp2. Application is being integrated with webmethod to publish data. For that we need to put awssl40jn.dll in weblogic server. Could not able to locate where to put this dll file.

You can have the dll's anywhere. You just need to mention the location
in java.library.path.
For example if you have your Dll's in C:\bea\lib
You need to mention the following in your command line args:
java -Djava.library.path=C:\bea\lib ****Other Command Line Args****
weblogic.Server
Hope this helps.
-Kiran
"Dave Martin" <[email protected]> wrote in message news:<[email protected]>...
I don't see a DLL like yours in a fresh install of WLS 6.1 SP2
This is the complete list of DLLs I find in my fresh install of WLS 6.1 SP2 (starting
from the BEA home) on Windows:
/jdk131/bin/dt_shmem.dll
/jdk131/bin/dt_socket.dll
/jdk131/bin/jdwp.dll
/jdk131/jre/bin/ActPanel.dll
/jdk131/jre/bin/agent.dll
/jdk131/jre/bin/awt.dll
/jdk131/jre/bin/classic/jvm.dll
/jdk131/jre/bin/cmm.dll
/jdk131/jre/bin/dcpr.dll
/jdk131/jre/bin/dt_socket.dll
/jdk131/jre/bin/fontmanager.dll
/jdk131/jre/bin/hotspot/jvm.dll
/jdk131/jre/bin/hpi.dll
/jdk131/jre/bin/hprof.dll
/jdk131/jre/bin/ioser12.dll
/jdk131/jre/bin/java.dll
/jdk131/jre/bin/jawt.dll
/jdk131/jre/bin/jcov.dll
/jdk131/jre/bin/JdbcOdbc.dll
/jdk131/jre/bin/jdwp.dll
/jdk131/jre/bin/jpeg.dll
/jdk131/jre/bin/jpins32.dll
/jdk131/jre/bin/jpishare.dll
/jdk131/jre/bin/jsound.dll
/jdk131/jre/bin/msvcrt.dll
/jdk131/jre/bin/net.dll
/jdk131/jre/bin/NPJava11.dll
/jdk131/jre/bin/NPJava12.dll
/jdk131/jre/bin/NPJava131.dll
/jdk131/jre/bin/NPJava32.dll
/jdk131/jre/bin/NPOJI600.dll
/jdk131/jre/bin/packager.dll
/jdk131/jre/bin/server/jvm.dll
/jdk131/jre/bin/server/jvm_g.dll
/jdk131/jre/bin/verify.dll
/jdk131/jre/bin/zip.dll
/wlserver6.1/bin/fastfile.dll
/wlserver6.1/bin/iisforward.dll
/wlserver6.1/bin/iisproxy.dll
/wlserver6.1/bin/jsafe.dll
/wlserver6.1/bin/md5.dll
/wlserver6.1/bin/md5_g.dll
/wlserver6.1/bin/nodemanager.dll
/wlserver6.1/bin/oci816_7/weblogicoci37.dll
/wlserver6.1/bin/oci816_7/weblogicoxa37.dll
/wlserver6.1/bin/oci816_8/weblogicoci37.dll
/wlserver6.1/bin/oci816_8/weblogicoxa37.dll
/wlserver6.1/bin/oci817_8/weblogicoci37.dll
/wlserver6.1/bin/oci817_8/weblogicoxa37.dll
/wlserver6.1/bin/oci901_8/weblogicoci37.dll
/wlserver6.1/bin/oci901_8/weblogicoxa37.dll
/wlserver6.1/bin/proxy30.dll
/wlserver6.1/bin/proxy35.dll
/wlserver6.1/bin/proxy36.dll
/wlserver6.1/bin/stackdump.dll
/wlserver6.1/bin/stackdump_g.dll
/wlserver6.1/bin/terminalio.dll
/wlserver6.1/bin/wlenv.dll
/wlserver6.1/bin/wlntio.dll
/wlserver6.1/bin/wlntio_g.dll
/wlserver6.1/bin/wlntrealm.dll
/wlserver6.1/bin/wlntrealm_ms.dll
/wlserver6.1/uninstaller/resource/iawin32.dll
/wlserver6.1/uninstaller_servicepack/resource/iawin32.dll
manoj <[email protected]> wrote:
"where to keep *.dll files in weblogic server 6.1 sp2". Application is
deployed on weblogic server 6.1 sp2. Application is being integrated
with webmethod to publish data. For that we need to put awssl40jn.dll
in weblogic server. Could not able to locate where to put this dll file.

BEA WebLogic Integration 2.1 is now available

Hi all,
BEA WebLogic Integration 2.1 is now available!
Read the press release at
http://www.bea.com/press/releases/2001/1022_portal_wli.shtml
Download the software for evaluation purposes from
http://commerce.bea.com/downloads/weblogic_integration.jsp
Regards, David Burke
ECI Product Management
BEA Systems, Ltd.

Ashish,
WLI 2.1 does not run on WLS 6.0, only WLS 6.1 SP1.
WLI 2.0 -> WLS 6.0 SP2
WLI 2.1 -> WLS 6.1 SP1
Cheers,
Chris
Ashish Agrawal wrote:
Hi David,
I downloaded WLI2.1 and installed it successfully.
I am using WLS 6.1 SP1 with WL2.1.
Please tell me does WL2.1 supports WLS 6.0 as I am getting error in deploying
a JCA adapter in WL2.1 + WLS 6.0 SP2.
The same adapter was successfully deployed using WL2.1 + WL6.1
Thanx in advance
Ashish Agrawal
ASAP Solutions.
"R J David Burke" <[email protected]> wrote:
Hi all,
BEA WebLogic Integration 2.1 is now available!
Read the press release at
http://www.bea.com/press/releases/2001/1022_portal_wli.shtml
Download the software for evaluation purposes from
http://commerce.bea.com/downloads/weblogic_integration.jsp
Regards, David Burke
ECI Product Management
BEA Systems, Ltd.

WebLogic Integration eval fails installation

I installed WebLogic 6.0 SP2 and the EJB 2.0 Upgrade as told in the installation
document, but the Integration Installer fails giving the message "No existing
Weblogic" and exists.
Does anybody had this problem before ?
regards,
Linus

I would, but there doesn't seem to be a group like that on
newsgroups.bea.com...
Linus
"Chuck" <[email protected]> schrieb im Newsbeitrag
news:3bc5f959$[email protected]..
>
Linus,
I would post this message in the weblogic.integration.install newsgroupsince
the problem is related to the Integration Installer and not the WebLogicServer
installer

Issue with creating array of custom data type - WebLogic Integration

Hi,
We are doing WebLogic integration with Siebel for which from Siebel side we have generated java wrapper class which has all the methods, input\outputs defined and in\out params are serialized along with get\set methods. Following are the details of the input\output args.
Account_EMRIO.java
public class Account_EMRIO implements Serializable, Cloneable, SiebelHierarchy {
protected String fIntObjectFormat = null;
protected String fMessageType = "Integration Object";
protected String fMessageId = null;
protected String fIntObjectName = "Account_EMR";
protected String fOutputIntObjectName = "Account_EMR";
protected ArrayList <AccountIC> fintObjInst = null;
Above class also includes constructors\overloaded constructor\getters\setters
public AccountIC getfintObjInst() {
if(fintObjInst != null) {
return (AccountIC)fintObjInst.clone();
}else{
return null;
public void setfintObjInst(AccountIC val) {
if(val != null) {
if(fintObjInst == null) {
fintObjInst = new ArrayList<AccountIC>();
fintObjInst.add(val);
For the nested user defined data type AccountIC, it is defined in another java class as below
AccountIC.java
public class AccountIC implements Serializable, Cloneable, SiebelHierarchy {
protected String fname = null;
protected String fParent_Account_Id= null;
protected String fPrimary_Organization = null;
With the above, I was able to get all the AccountIC in the wsdl correctly and using this I was able to set the input param in the client
WSDL:
<xs:complexType name="accountEMRIO">
<xs:sequence>
<xs:element name="fIntObjectFormat" type="xs:string" minOccurs="0"/>
<xs:element name="fIntObjectName" type="xs:string" minOccurs="0"/>
<xs:element name="fMessageId" type="xs:string" minOccurs="0"/>
<xs:element name="fMessageType" type="xs:string" minOccurs="0"/>
<xs:element name="fOutputIntObjectName" type="xs:string" minOccurs="0"/>
<xs:element name="fintObjInst" type="tns:accountIC" minOccurs="0"/>
</xs:sequence>
<xs:complexType name="accountIC">
<xs:sequence>
<xs:element name="fName" type="xs:string" minOccurs="0"/>
<xs:element name="fParent_Account_Id" type="xs:string" minOccurs="0"/>
<xs:element name="fPrimary_Organization" type="xs:string" minOccurs="0"/>
minOccurs="0"/>
</xs:sequence>
</xs:complexType>
Now, I wanted to make slight difference in getter method of class Account_EMRIO method getfintObjInst so that an array of AccountIC is retured as output.
public ArrayList<AccountIC> getfintObjInst() {
if(fintObjInst != null) {
return (ArrayList<AccountIC>)fintObjInst.clone();
}else{
return null;
With the above change, once the wsdl is generated, I am no longer getting fintObjInst field for AccountIC due to which I am unable to get the array list of accountIC
WSDL:
<xs:complexType name="accountEMRIO">
<xs:sequence>
<xs:element name="fIntObjectFormat" type="xs:string" minOccurs="0"/>
<xs:element name="fIntObjectName" type="xs:string" minOccurs="0"/>
<xs:element name="fMessageId" type="xs:string" minOccurs="0"/>
<xs:element name="fMessageType" type="xs:string" minOccurs="0"/>
<xs:element name="fOutputIntObjectName" type="xs:string" minOccurs="0"/>
</xs:sequence>
</xs:complexType>
The issue that I am facing here is, we have a custom data type(AccountIC) which has several fields in it. In the output I need a array of AccountIC. In the java bean, when this type was defined as
protected ArrayList <AccountIC> fintObjInst = null; I was unable to get a array of AccountIC. this gets complicated as inside a AccountIC there is array of contacts as well and all the time I am getting just the first records and not a array.
To summarize: How to get xsd:list or maxoccurs property for a field in WSDL for the user defined\custom datatype?
Can someone help me with this.
Thanks,
Sudha.

can someone help with this??

Weblogic Integration Interview Questions and Answers

Can some one send me WebLogic Integration interview questions and answers to [email protected] and [email protected]
Thank you.

hi all,
can any one help us how to get or retrieve DataSource Names in weblogic using java code.
it is very urgent. please copy the java code here.
Somu :)

Weblogic Integration 10r3 error in msg-header-2_0.xml

Hello,
I am trying to go through te WLI workshops, but cannot publish a WLI process.
The Tutorial_Process_Application RequestQoute.java has the following error in the msg-header-2_0.xml:
Severity and Description Path Resource Location Creation Time Id
Referenced file contains errors (http://www.w3.org/TR/1999/REC-html401-19991224/strict.dtd). For more information, right click on the message and select "Show Details..." Tutorial_Process_Application_Utility/schemas/system msg-header-2_0.xsd line 1 1257804610777 410
A new WLI project from scratch gives te same error, it is as if the msg-header-2_0.xml is not correctly generated when the WLI process is created.

Aha! problem solved :)
The tutorial states : 'Select the Add WebLogic Integration System and Control Schemas to Utility Project check box to add the system schemas to the Schemas folder under the Utility project.'
If you do that it does not work, and i get the errors I discribed in the post, howerver if ypu leave it blanked out, the process can be published, without error or warnings.
As I am new to WLI (use to work with Oracle Bpel) I have no idea about the importance of adding the Integration system and control schemas to the utility project.
However as my goal is to work through the workshops, I wil worry about it later.
Edited by: DaveVQ on 14-nov-2009 5:39

WLST and WebLogic Integration

Hi all,
I have installed WebLogic Integration 8.5 bundle. Meaning i have also installed weblogic server 8.1. on Windows XP
I am now trying to use Weblogic Scripting Tool WLST. But there is no tools on the menu(tools->weblogic scripting tool) this was added in the 9.1 installation...
How do I configure my installation weblogic server 8.1 with WLI8.5 to run WLST?
after i run setELSEnv.cmd to set the environment. Then i try java weblogic.WLST and the error is "java.lang.NoClassDefFoundError: weblogic/WLST"
Where are the libs, how do i configure WLST to run.
I also tried starting the WLST from the 9.1 installation, but it cannot connect to 8.1 installation, tough connecting to 9.1 installation is no problem. If i try i get this error: "weblogic.management.ManagementRuntimeException: java.lang.NoSuchMethodError: isCachable"
(I installed weblogic 9.1 and there the WLST was installed during installation and all works just fine. unfortenatly my system must run on 8.1->wli8.5)

Hi
I am trying to use WLST tool for configuring Weblogic domain in 9.1 OFFLINE.
I have done with almost all except JTA configuration.
Can you please give me smaples for the same.
The following is part iof my script...
readTemplate('F:/AuctionDoc/Installer/inDomain.jar')
cd('/JDBCSystemResource/localNonTxPool/JdbcResource/localNonTxPool')
create('myJdbcDataSourceParams','JDBCDataSourceParams')
cd('JDBCDataSourceParams/NO_NAME_0')
set('JNDIName', 'jdbc/NonTxDataSource')
#JDBC settings and other JMS settings worked
But the JTA settings dint work
#=======================================================================================
# Set JTA timeout
#=======================================================================================
cd("/JTA/inInstDomain")
set("TimeoutSeconds", "1200")
set("AbandonTimeoutSeconds", "1200")
I have to do the above OFFLINE.
I could not locate the JTA folder or any thing related with JTA configuration to do offline using WLST
Can you please give an example of JTA settings
Thanks
Binu

Upgrading a project from Weblogic Integration 8.1.3 to Weblogic Integration

Can anyone offer any advice to assist me in upgrading a project from Weblogic Integration 8.1.3 to Weblogic Integration 9.2.1?
Here are some nuances of the project:
* The JNDI, JDBC, & JMS server resources are secured; access is controlled by Deployment Descriptor run-as/security-role/... tags and custom CSPs
* The application is currently build for deployment using wlwBuild ant task (class in workshop.core.WlwBuildTask which is located in the 8.1.3 {weblogic.home}/workshop/wlw-ide.jar - so far I can't find this class/task in my 9.2.1 install)
* The following are the application characteristics (and utilized WLI features): multiple web apps, EJBs, JMS, Page flow/netUI, web services, WLI controls (process, java, transformation), XMLBeans
* One of the project goals is to not make any functional changes and modify as little code as necessary (the only expected justification for a modification is a) fallout out from the JVM 1.5 upgrade or b) something is no longer available in WLI 9.2)
I know there is a edocs page with a tutorial for upgrading from 8.1.4 or 8.1.5 to 9.2, but I am interested in knowing if anyone has insight on upgrading directly from 8.1.3?
Thanks in advance for any and all assistance.
Regards,
Andy Frank

just as a followup to my original message.. regarding the 8.1.4 install log that had all the warnings with the msi it expected and the different one it found... at the bottom of the log..this is what I got;
Property(S): SourcedirProduct = {AC76BA86-7AD7-1033-7B44-A81300000003}
MSI (s) (6C:30) [11:11:23:828]: Product: Adobe Reader 8.1.4 - Update 'KB408682' installed successfully.
MSI (s) (6C:30) [11:11:23:828]: Product: Adobe Reader 8.1.4 -- Installation operation completed successfully.
when i go into adobe reader -> help -> about i stillget 8.1.3

When will WebLogic Integration 9.2 Certification will be available?

Currently it seems only Integration Developer based on WLI 8.1 is available. Since I am using WLI 9.2 not is not suitable.
Anyone know when BEA plan to have WLI 9.2 certification available

T C wrote:
I have also run into the "Run Database Scripts" dialog box after creation of a domain. When I started the domain I got the following error:
<[Security:090737]An exception occured while getting connection to validate the configuration settings
va.sql.SQLException: [Security:090735]The DBMS connection was not usable
I have BEA 9.2 Platform running on Windows 2000 Professional Service pack 3.
Incidentally, I started pointbase manually (startPointBase.cmd), started PointBase Console (startPointBaseConsole.cmd) in order to execute the SQLAuthenticator.sql script. This all failed because this SQL script refers to tables GROUPS and USERS, which did not exist in my PointBase schema.
What worked for me was:
1. Create a new domain, and only select Workshop for WebLogic, WebLogic Portal, and WebLogic Integration options.
2. Select YES to Customize Environment and Services Settings tab.
3. Take defaults until the Run Database Scripts dialog box.
4. On the Run Database Scripts dialog box, run the scripts for p13nDatasource and cgDataSource-nonXA.
5. Take default on the remaining steps, and after domain creation the "Run Database Scripts" dialog box shouldn't appear, and the domain should start properly.I'm curious though as what would one do if instead of PointBase DB, we use MS SQL 2000,
for all the relevant databases in an Integration domain? Thanks.
---Nam

When will Weblogic Integration 9.2 release?

Dear all,
Could anyone provide me some information about the release date of Weblogic Integration 9.2?
Cheers,
Xuehui

There is one link here - not sure if it is the one you need
http://www.oracle.com/technetwork/middleware/ias/downloads/wls-main-097127.html
HTH
Srini

Understanding Weblogic Integration 9.2

Hi All,
I am very new to Weblogic Integration and we were asked to make our application use WLI. Our application has many source feeds and we also interface with SAP with Web Services calls. I am totally new to Weblogic Integration and I would appreciate if anyone can point me to the starting point. I want to learn how WLI works and how to write controls etc.
I downloaded Weblogic platform and tried to follow through the tutorial that Bea provides, but could not find any help. Tried to search for books online but could not find any. Any help regarding resources i.e. books or online "free" tutorials/courses is greatly appreciated.
Thank you,
S

Sarin,
I have worked on an WLI project,where integration was with SAP.We used iWay adapter to integrate with SAP system.With respect to WLI, you need to learn JPD(Java Process Definition),Data Transformation,XQuery,Event generators,Channel file,need a very good understanding of XSD(Schema Definition).Also you need to work with WLI console(http://localhost:7001/wliconsole),where you can create your business calendars,event generators.The weblogic workshop help would be a good starting point.Again you can find lots of documents at http://www.edocs.bea.com.
Let me know if you have any specific question.
Regards
Bishnu
Edited by bishnu_kumar at 05/21/2007 1:29 AM

Bea Weblogic Integration 9.2 Unix installer

Hi
Can somebody please help me to get Bea Weblogic Integration 9.2 Unix installer ? I want it for developement purpose on unix machine.
I am not able to find it on the oracle product site.
Thank you.

There is one link here - not sure if it is the one you need
http://www.oracle.com/technetwork/middleware/ias/downloads/wls-main-097127.html
HTH
Srini

Weblogic Integration 2.1 sp2

Similar Messages

Maybe you are looking for