Weblogic is using only one of the available cpus!

Hi all, I have this problem: weblogic application server 9 mp2 on a linux server with 4 cpus is using only one cpu. The jvm seems to be pinned on one cpu.
Is there something to set or a particular jvm parameter? I'm using the jrockit jvm.
Thanks
Marco Strullato

Firefox is 32 bit if you want to use all 8 cores you can use a 64 bit variant of firefox such as
* Waterfox - http://www.waterfoxproject.org/
* Nightly 64bit - http://forums.mozillazine.org/viewtopic.php?t=2239223&f=23 (Linux Only)
'''NOTE:''' Both of these versions of firefox are unstable and may combust.

Similar Messages

Hi, If I have 1 license for creative cloud, will it possible to install in 2 computers (1 laptop and 1 desktop)? When I am in the office I can use desktop and at home I can use laptop? At the same time I will be using only one devise. Will that be possi

Hi, If I have 1 license for creative cloud, will it possible to install in 2 computers (1 laptop and 1 desktop)? When I am in the office I can use desktop and at home I can use laptop? At the same time I will be using only one devise. Will that be possible? Thanks

Yes. Yes. Yes.
Mylenium

I am using only one Apple ID. The problem, since iOS 6, is the App Store purchased items screen just shows loading screen it finally crashes or gives the error message 'can not connect to Apple store'

I am using only one Apple ID. The problem, since iOS 6, is the App Store purchased items screen just shows loading screen it finally crashes or gives the error message 'can not connect to Apple store'

I am using only one Apple ID. The problem, since iOS 6, is the App Store purchased items screen just shows loading screen it finally crashes or gives the error message 'can not connect to Apple store'

How to use Mulitple DAQs with a single triggered event on only one of the DAQs

I have three PXI6115 and would like to tie all these to a single triggered event on one of the DAQs. I've scaned the examples and any assistance would be greatly appreciated....

TCjr,
Please refer to your other post:
How to use Multiple DAQs with a single triggered event on only one of the DAQs

Database uses only one cpu core from 16 available

Hi,
we have an server with 16 CPU cores, and we discovered from em that it uses only 1 core with 100% and the others are idle.
the initialization parameters for CPU are:
cpu_count 16
parallel_threads_per_cpu 2
resource_manager_cpu_allocation 16.
What can we do to use all 16 cores.
Regards
Nicoale Ancuta

Nicolae Ancuta wrote:
Very interesting poit of view, but since I have for some period of time 1 core on 100% and other cores are idle or 0%,
I don't think that we can say that linux and oracle database 11g is using the best from that server, can you?Well, I did not offer a point of view. I offered fact - a reason why on x86 architecture it is faster to keep threads on the same CPU (if sufficient CPU capacity) then run such threads across CPUs.
As for what you are seeing - we cannot see it. So the only data we have is what you offered. And that does not suffice in making any kind of call as to why you are seeing, or even describing the symptoms correctly.
Why don't you try another example? 3 client server applications. Each client post a request (huge update 100% CPU, small update 0% CPU, huge select 100% CPU). What the server does, it switches between those 2 huge requests an uses only one core on 100% abd the others 15 are sleeping. Why don't use each request on different core and reduce the time?Define "+huge request+". Database operations are typically I/O intensive - not CPU intensive. There are also a number of processes. So if PMON for example is showing high CPU, then that means something different as when DBWR is showing high CPU, versus a dispatcher process showing high CPU.
So you need to provide a lot more detail for us to speculate as to what the problem could be, never mind offering a solution.

VPLS (ATM-Ethernet) using only one circuit in the main ethernet site

Hi Everybody
We are needing to connect the following topology in our MPLS net:
The main site connects to the net through an Ethernet circuit and the remote sites are connected through ATM circuits. we need to use only one vlan in the main site. It is possible to connect this topoligy using only one vlan in the main site through VLPS? or pseudowires? which other solution can we use to solve this problem?
thanks a lot.

I understand your best option will be to run AToM/L2VPN internetworking and have a PVC from a remote locate to be "internetworked" to a sub-interfaces (representing a vlan) at the central site which have an Ethernet connection.
Take a look at this example:
http://www.cisco.com/en/US/docs/ios/wan/configuration/guide/wan_l2vpn_iwkg_ps6922_TSD_Products_Configuration_Guide_Chapter.html#wp1055162
HTH,
-W

HT204053 i RECENTLY PURCHASED ANOTHER IPHONE. MY INTERNET IS NOT WORKING. I JUST CREATED AN APPLE ID. WHAT'S NEXT? I NOW HAVE TWO DIFFERENT ACCOUNTS WITH DIFFERENT USER NAMES. HOW CAN I USE ONLY ONE ACCOUNT FOR ITUNES, ICLOUD APPLE ID ETC???

I RECENTLY PURCHASED ANOTHER IPHONE. MY INTERNET IS NOT WORKING. I JUST CREATED AN APPLE ID. WHAT'S NEXT? I NOW HAVE TWO DIFFERENT ACCOUNTS WITH DIFFERENT USER NAMES. HOW CAN I USE ONLY ONE ACCOUNT FOR ITUNES, ICLOUD APPLE ID ETC???

Welcome to the Apple community.
iTunes and iCloud and different accounts, you will need to delete both accounts from your device before adding the new details in their place.
For iCloud go to settings > iCloud, scroll down and hit the delete button. You can then sign back in using your correct details. For iTunes go to settings >store, tap your account ID and then sign out, you can then sign back in using your correct Apple ID.

Design Problem : How to design/code a java client which is deployed to all the machines in a cluster and make sure that only one of the java client is active

          hi ,
          I have to design a java client (which is basically a JMS message listener)which
          is deplloyed to all the servers in the cluster. But as these are message listeners,
          i want only one of the instance to be active at a time.
          If the server on which the client is active goes down , I want the second server
          to start listening to messages.
          How do i design this ? Also is there a public api for multicasting that we can
          use ?
          Anybody has an idea on how to go about this..
          Thanks
          nisha


Hi Nisha,
          Failover message listeners? Sounds like you want MDBs, which are deployed on all nodes in a
          cluster. If your JMS destination is a queue, then only one MDB will pick up the message. And just
          like any other ejb service, MDBs failover.
          Gene
          "Nisha" <[email protected]> wrote in message news:[email protected]..
          hi ,
          I have to design a java client (which is basically a JMS message listener)which
          is deplloyed to all the servers in the cluster. But as these are message listeners,
          i want only one of the instance to be active at a time.
          If the server on which the client is active goes down , I want the second server
          to start listening to messages.
          How do i design this ? Also is there a public api for multicasting that we can
          use ?
          Anybody has an idea on how to go about this..
          Thanks
          nisha

Need to use only one sender and receiver communication channel.

Hello Experts.
I have a scenario where in I have to use only one sender and receiver communication channel to push files from different source directories to different receiver directories.
For Eg;
Sender
D://dir1/file1 --->                  E://dir1/File1
F://dir2/file2 ---->                 G://dir2/file2
H://dir3/file3----->                 I://dir3/file3.
Can this be achieved by using pass through scenario?
Please let me know if the requirement is not clear.
Thanks in advance.
Advit Ramesh

Hi Advit,
I think it is possible. You have to use the Advanced Selection for Source file in the sender channel to define multiple files to be picked up. Also, the Dynamic configuration must also be enabled and used in the mapping so you can manipulate the target directory and target file name based on your source files.
For Polling from multiple directories:
http://wiki.scn.sap.com/wiki/display/XI/File+Sender+Adapter+-+Polling+Multiple+Directories
Dynamic Configuration:
Dynamic file name and directory in Receiver File Adapter - summary of possibilities - Process Integration - SCN Wiki

How do you use only one plugin in Logic for multiple guitar tracks? I want to only use one instance of Pod Farm and run all my guitar tracks through that one instance.

I want to be able to use only one instance of Pod Farm for my guitars, and have all of my guitar tracks run through it while I'm recording.

What he said. Or here is a similar approach with a picture.
1. Press the SEND button on every stereo (or mono) guitar track you want to send through the effect. Then select a free bus.
2. Make sure you turn up the amount of send (in db). Holding alt while leftclicking on this circle sets the send level to 0 db wich is good.
3. Open the mixer (Cmd+2). Please see that I here have turned the output off from the stereo guitar track. That way the only output will be the BUS, in your case the AmpTrack bus where all your guitars will pass through. If you want both the original guitar sound AND the Ampfarm effect then just set all outputs on your guitar tracks to Stereo Out, like the AmpF Bus track is set in my picture.
4. Insert your AmpFarm plugin here. I don´t have that plug so I inserted Waves Renes Axe for demo purpose.
Adjust the volume/effect of every guitartrack by turning the circle input shown as 2. in my picture.
I now see that you mentioned Pod Farm, not AmpFarm. But I guess it´s the same trick.
Have fun.
Heyclown.
Message was edited by: WizardSongs - Typhoos

Can't sign in to iMessage and Facetime with my Apple ID, only one or the other

I have an iPhone 5 running iOS 6.1.2 on AT&T.
I've noticed I am unable to use my Apple ID for both Facetime and iMessage; if I am signed in to one of them, I'm unable to sign in to the other. I get in a loop of the phone repeatedly popping up a password entry screen for the Apple ID.
If I cancel the process and sign out of either, I can successfully sign in to the other. But no matter which I sign into first, I cannot sign in to both at the same time. >__< It's working fine on my other iDevices (iPad 1, iPhone 4), this is the only one having the issue. The issue has been happening since my purchase of the iPhone 5 last year.
Any ideas on a fix? It's driving me nuts. I've even just restored my phone and still receiving the exact same issue. Thanks in advance for any help as I am at a loss. ;(

I THINK I might have found out a fix. First, I went in and signed into iMessages, but left Facetime logged out. I then went in Settings and turned off FaceTime altoghter. Afterwards I went to ensure iMessages was still signed in (Paranoia perhaps lol). Then I went back in and re-enabled FaceTime. The information was inserted back in, but Caller ID for Facetime was unchecked, so I selected my email address instead of phone. And both have oddly been working fine and stayed signed in since. No password requests at all.
I have zero clue why this works, but it does. I only figured it out thanks to obcessive behavoir and inablilty to accept it was broken lol. Anyone else with the issue want to confirm if it works for them as well?

Multiple Qaawses but use only one Qaaws at a time

Hi,
In Dashboard , I have two Qaawses (Qaaws1 and Qaaws2). When I am trying to generate SWF file both the qaawses are running. My requirement is, in Excel file I will set a flag value in one cell (0/1).
If the cell value is '0' then the Dashboard should use only Qaaws1.
If the cell value is '1' then the Dashboard should use only Qaaws2.
In essence my requirement is, even though multiple Qaawses are present in Dashboard, the Dashboard should be able to use only one Qaaws at a time based on my requirement (i.e., based on flag bit value 0/1).
Can any one suggest, solution for this?
Thanks in advance.
Regards,
M. N. Kishore Babu.

Hi David,
Thank you very much for the response and sorry for the delay.
Our actual scenario is a s follows:
We pass customer id and shipper Group Id as an input parameters to the flash variables from front end (through Java program). And these two values will written in Excel cells (let say Customer id in A1, and Shipper Group Id in B1)
Now there are two Qaawses, Qaaws1 and Qaaws2 in the xlf in addition to flash variables.
Qaaws 1 query is as follows :
select * from shp_details where customer id = A1
Qaaws 2 query is as follows :
select * from shp_details where customer id = A1 and ShipperGroup_id = B1
On front end we have two drop downs, Dropdown1 is for customer id and Dropdown2 is for Shipper Group Id.
When we select an item in Dropdown1, from front end we pass only Customer Id and when we select an item in Dropdown2, we pass both Customer Id and Shipper Group Id.
Our requirement is,
When we select Dropdown1 (we are passing only customer id), we expect only Qaaws1 to be executed.
When we select Dropdown2 (we are passing both customer id and shipper Group Id), we expect only Qaaws2 to be executed.
Please let me know, if I need to provide any further clarification.
Thanks & Regards,
M. N. Kishore Babu.

Parallelism in oracle using only one dual-core processor

Hi, is usefull or could i use parallel execution in oracle using only one dual core processor?
Can someone explain me why?

Hi
To take advantage of parallel processing you need enough resources (mainly CPU and I/O). If you run serially and the bottleneck is the CPU, then parallel processing might help. On the contrary, if the bottleneck is located in the I/O sub-system, throwing more CPU to it would not make things better. So, it's a question of balance between the CPU and I/O resources you have.
HTH
Chris

Is third-party SO/PO process possible using only one company code?

Hi friend,
1) my client wants to implement third-party PO process but also wants a way of keeping track of inventory during this process. I know that inventory should be tracked on the vendor side and not on our client side since we're doing third-party PO.
However my client wants to track inventory (in an inventory g/l account like 120100) so that when my client post a Goods Receipt, the inventory account
gets Debited and when client post the outgoing invoice to customer, the inventory account gets Credited. In this way, my client can track
if the customer have received the ordered item or not.
The problem is that third-party PO posts to consumption account but DOES NOT post to inventory account. Is there any way of
setting this up so that in addition to posting to comsumption account every time a Goods Receipt occurs?
2) i tried to create "Individual Purchase Order" (customer order from client -> client order from
vendor -> vendor ships item to client -> client then ships item to customer) so that posting will hit inventory account.
However, i find that taking this approach involves setting up a Plant for vendor (A), a Plant for our Client (B), and a Plant for Customer (C).
Because when i do a Goods Receipt, the stock has move from Plant A to Plant B. Then when i do a Goods Issue to the customer, it asks for the receiving plant. I assume this means that the stock moves from Plant B to Plant C.
Also, from the reading i did on the forum, i get the impression that i need to create more than one Company Code if i were to do
third-party PO. Do the Vendors have to be created in a different company code then the Customer? Or does it mean that Just the
plant (like Plant A) needs to be created in a different Company Code then Plant B and Plant C?
3) can i do third-party PO using only ONE company code?
Can anyone provide some clarification on this issue? I've read tons of posting but none really helped clear this issue up.
Thanks so much.

Dear Kishore,
Individual PO processing is not third party process at all. In third party process the vendor delivers the goods dirctly to the customer - please check what SAP help says.
http://help.sap.com/saphelp_46c/helpdata/en/dd/5601d4545a11d1a7020000e829fd11/content.htm
Dear Queyen,
One important point of third party process is that there's no need to keep stock of materials - that is in harmony with reality. Why does your customer want to keep stock from the goods if they doesn't receive at all? Is it coreect? It doesn't correspond to the fact.
You can do statistical (ghost) GR against the third-party PO and you can see the goods movement in MB51 - I think this should be enough.
http://help.sap.com/saphelp_46c/helpdata/en/dd/560287545a11d1a7020000e829fd11/frameset.htm
BR
Csaba

Spry menu bar -- only one of the submenus of a drop down set works.

I created a spry drop-down menu bar for navigation within my site for a special event (on October 19). Most items have only one filie (e.g., tickets) but some of the items (e.g., Historic Homes) have up to 8 sub-items.
I renamed the spry file. I defined all my menu and sub menu items using the dialog box. I styled the bar for both basic state and "hover."
So far, so good.
I then created multiple new pages by using "Save As" (the original menu bar file)-- substituting appropriate text to to make the additional item and sub item files.
But when I link it all up and test it, only ONE of the submenus work. The menu disappears from the other sub menu pages when I navigate to them. Users can't get back to the original menu choices..
This is the first time with a Spry Menu bar.
Can you help?
Susan

Without seeing your code, I'm guessing your lists and sub-lists are not properly coded. Check your HTML & CSS with the validation tools below:
Code validation tools
CSS - http://jigsaw.w3.org/css-validator/
HTML - http://validator.w3.org/
Nancy O.

Weblogic is using only one of the available cpus!

Similar Messages

Maybe you are looking for