WebLogic Maintenance Packs Vs Installations?
I installed WebLogic 9.2.3 on Windows XP Professional. I know, it isn't up to date, but that is what the place I work at has on their test and production servers. I am setting up a development environment for myself and I would rather the WL I am using match theirs.
WebLogic 9.2.3 seems to be running and the example programs/example server seems to be running.
On the Oracle downloads page there is a download called "*Oracle WebLogic Server 9.2 MP4*"
http://www.oracle.com/technetwork/middleware/weblogic/downloads/wls-main-097127.html
Does the "MP" mean "maintenance pack"? Does the "maintenance pack" install a full version of WebLogic, just bugfixes/an upgrade?
I tried running "*Oracle WebLogic Server 9.2 MP4*", but I got this message
The product maintenance level of the current installer (9.2.4.0) is not compatible with the maintenance level of the product installed on your system( 9.2.3.0 ). Please obtain a compatible installer or perform maintenance on your current system to achieve the desired level.+
Does that mean that I need a "Oracle WebLogic Server 9.2 MP*3*" and if so, where can I get one? Would I then install MP4?
Like I wrote, things seem to be running well, what would this pack do for me?
Thanks in advance for the information. I am totally new to WebLogic
Hi!
This happens because of the confusion between the full installer and the upgrade installer. This error indicates that the standard installer was run instead of the upgrade installer. The standard installer is used for installing a new product or adding options to an existing installation of the same version.
TYo upgrade your current instalation to a later Service Pack or Maintenance Pack, please use Smart Update or download an Upgrade Installer.
The nomenclature has been changed for WLS 10.x. In the same way, in 8.x it was SP instead of MP.
Hope this helps.
-Cris
Similar Messages
-
I'm using smart update util to upgrade my 10.3.1 weblogic installation. In Oracle Smart Update util I selecte Maintenance Packs->Update and it bring up a BEA Smart Update application which finds 10.3.3.0 as the upgrade option.
After selecting this option, clicking ok and accepting the defaults the upgrade operation starts. About halfway through it fails with a Fatal Error message. Looking through the bsu.log I found this error:
2011-03-03 15:57:12,571 WARN [installTwoJdks_gui] com.bea.plateng.wizard.installer.gui.tasks.ProgressTwoJdksTask - JDK archive /tmp/linux32_jdk160_18.zip did not exist, trying jdks directory...
2011-03-03 15:57:12,574 ERROR [installTwoJdks_gui] com.bea.plateng.wizard.WizardController - Uncaught Exception
java.lang.UnsatisfiedLinkError: Can't load library: /weblogic/utils/bsu/upg10330/libjni.so
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1677)
at java.lang.Runtime.load0(Runtime.java:770)
at java.lang.System.load(System.java:1005)
at com.bea.plateng.common.jni.JNIUtil.loadLibrary(JNIUtil.java:207)
at com.bea.plateng.common.jni.JNIUtil$ZipFile.<clinit>(JNIUtil.java:442)
at com.bea.plateng.wizard.installer.gui.tasks.ProgressTwoJdksTask.execute(ProgressTwoJdksTask.java:272)
at com.bea.plateng.wizard.gui.tasks.AbstractGUITask.run(AbstractGUITask.java:42)
at java.lang.Thread.run(Thread.java:619)
The file does exist at that location: /weblogic/utils/bsu/upg10330/libjni.so
Also failing in the middle of the upgrade messed up the weblogic installation - I had to revert to a backup I made before starting the upgrade.
Any ideas as to why this fails ?Maybe it helps checking read permissions of /weblogic/utils/bsu/upg10330/libjni.so file and directories...
-
Error: while applying Maintenance Pack
Hiii..,
IM applying the Maintanence Pack Patch 7303030, im upgrading my Apps version from 12.0.4 to 12.1.1.
Im following the MEtalink Document *Oracle E-Business Suite Release 12.1.1 Maintenance Pack Installation Instructions [ID 752619.1]*
while applying the patch i got the following error,
There are now 36259 jobs remaining (current phase=A2):
3 running, 0 ready to run and 36256 waiting.
Deferred: file cst4274743.sql on worker 4 for product bom username BOM. (Deferment number 2 for this job)
Assigned: file cst4274743.sql on worker 4 for product bom username BOM.
FAILED: file cst4274743.sql on worker 4 for product bom username BOM.
Completed: file zxdrpidx.sql on worker 3 for product zx username ZX.
Completed: file xtrdstrg.sql on worker 2 for product xtr username XTR.
Completed: file peovndis.sql on worker 1 for product per username HR.
ATTENTION: All workers either have failed or are waiting:
FAILED: file cst4274743.sql on worker 4.
ATTENTION: Please fix the above failed worker(s) so the manager can continue.
Plz anyone can help me in resolving the issue..
Thankss..Hi;
Please check worker logs file for error details.? Did you check alert.log? Did you try to restart workers via adctrl utulity?
Regard
Helios -
Installation hangs at 72% during Weblogic server 9.2 installation
I had already Weblogic portal server in my machine working fine. 3 days back when I opened workshop, it said "Could not create Java Virtual Machine" and was not starting. After that I reduced xms and xmx values in workshop.ini file and it worked but it gave other problems like outofmemory. So, I uninstalled that.
And When I tried to reinstall the Weblogic portal 9.2, installation went till 72% and when it turned to "Creating Sample Domains..." it got hang. I couldn't install it at all. Can someone please explain why it happened and how to resolve it? First of all I could not understand why suddenly it said "Could not create Java Virtual Machine"???????
I have Windows Xp Service pack 2 with 3 GB of RAM memory and 7 GB free space in C drive.Dear Senthil,
It seems your RAM is getting utilized by some other processes on your machine , Check all of them as you have enough RAM required by WLS. Also for next installation , delete all the files created by earlier installation .
Also importantly unset the environment variables got set by earlier WLS installation. -
Multilingual Maintenance Packs
I'm currently busy with setting up a Campus Solutions demo environment and I've got a question. I've used the installation files from the edelivery website which includes Feature pack March 2011. From the maintenance log in the database I can see the following Maintenance packs are included:
HCM 9 Maintenance Pack 10 - Delta
HCM 9 Maintenance Pack 10 - Delta
HCM 9 Maintenance Pack 9 - Delta
HCM 9 Maintenance Pack 8 - Delta
HCM 9 Maintenance Pack 7 - Delta
HCM 9 Maintenance Pack 6 - Cumulative
HCM 9 Maintenance Pack 6 - Cumulative
HCM 9 Maintenance Pack 6 - Cumulative
HCM 9 Maintenance Pack 6 - Delta
HCM 9 Maintenance Pack 5 - Cumulative
HCM 9 Maintenance Pack 5 - Cumulative
HCM 9 Maintenance Pack 5 - Cumulative
HCM 9 Maintenance Pack 5 - Cumulative
HCM 9 Maintenance Pack 5 - Delta
HCM 9 Maintenance Pack 4 - Cumulative
HCM 9 Maintenance Pack 4 - Delta
HCM 9 Maintenance Pack 3 - Delta
HCM 9 Maintenance Pack 3 - Cumulative
HCM 9 Maintenance Pack 2 - Delta
HCM 9 Maintenance Pack 2 - Cumulative
HCM 9 - Maintenance Pack 1
I understand the difference between the cumulative and delta (although it is a bit weird they are both listed) MP's.
Now comes the question however; I want to apply the Multilingual versions of the Maintenance packs as well, since the database will be running on a different language then English. According to Oracle it is not recommended to apply a ML Maintenance pack once the non-ML is already applied. The ML version of the Maintenance packs is however not included, so I have to install these. I also found a article on the support website which said that I should only apply the language which is other then English in that case. Does anyone have any idea how to exclude the English from the ML Maintenance pack? As far as I can see all the scripts and steps in the Maintenance pack don't easily let you exclude something like this. I'm a bit baffled about the statement from Oracle support on that matter, since they don't mention anything on how to do such a thing at all.
Any insights will be appreciated.Michael,
Usually Engish is the base language and any other language is setup and written to the translate tables.
Since you have chosen Dutch as the base language, English is now in the translate tables.
I cannot contradict Oracle on this point.
If you are not sure, make a copy of your database and try installing the ML.
The Change Assistent will automatically exclude languages other than English and Dutch.
After applying the ML see if the language related tables are still correctly filled.
If correct, keep on going.
If not, set your copy of the database back and swap the base language to English (which is common use)
After this you should not encounter any issues applying (ML) patches
Hakan
Edited by: Hakan Biroglu on Feb 15, 2012 8:34 AM -
Error when install maintenance pack 2
I install maintenance pack 2 today. It stops at BR688701_01.dms. The error is:
Started: Thu Jul 30 12:20:14 2009
Data Mover Release: 8.49
Database: PSDB (ENG)
SQL Error. Error Position: 36 Return: 904 - ORA-00904: "YEAR": 标识符无UPDATE PS_GPBR_RC_IREN SET YEARCD = YEAR
Error: SQL execute error for UPDATE PS_GPBR_RC_IREN SET YEARCD = YEAR
Ended: Thu Jul 30 12:20:14 2009
Unsuccessful completion
PeopleTools 8.49 - Data Mover
Copyright (c) 2009 PeopleSoft, Inc.
All Rights Reserved
Started: Thu Jul 30 12:20:14 2009
Data Mover Release: 8.49
Database: PSDB (ENG)
Message Set Number: 200
Message Number: 0
Message Reason: File: Data MoverSQL error. Stmt #: 0 Error Position: 36 Return: 904 - ORA-00904: "YEAR": 标识符无效
Failed SQL stmt:UPDATE PS_GPBR_RC_IREN SET YEARCD = YEAR (200,0)
SQL Error. Error Position: 36 Return: 904 - ORA-00904: "YEAR": 标识符无效
UPDATE PS_GPBR_RC_IREN SET YEARCD = YEAR
Error: SQL execute error for UPDATE PS_GPBR_RC_IREN SET YEARCD = YEAR
Ended: Thu Jul 30 12:20:14 2009
Unsuccessful completion
I find that the table PS_GPBR_RC_IREN has no row.
My entironment :
RedHat4
weblogic 9.2
oracle database 10.2.0.1
peopletools 8.49
hrms and campus solution 9.0
Edited by: hzg on Jul 30, 2009 12:25 PMYes, the column name is correct. When the error happened, I fond that the content of the BR688701_01.dms is:
UPDATE PS_GPBR_RC_IREN SET YEARCD = YEAR;
UPDATE PS_GPBR_SEFIP_EFDT SET YEARCD = YEAR;
UPDATE PS_GPBR_SEFIP_PARM SET YEARCD = YEAR;
UPDATE PS_GPBR_SERV_T_DT SET YEARCD = YEAR;
UPDATE PS_GPBR_SERV_T_DTA SET YEARCD = YEAR;
UPDATE PS_GPBR_SERV_T_DTL SET YEARCD = YEAR;
UPDATE PS_GPBR_STAKER_DTA SET YEARCD = YEAR;
UPDATE PS_GPBR_STAKER_MST SET YEARCD = YEAR;
I thought the error may be caused by the ‘YEAR’. However, I found that the tables had no row. So the command ‘UPDATE’cann’t execute. Does it mean I can skip this step? -
Applying maintenance pack 12.1.3 on 12.1.1
Hi,
I am preparing the steps need Applying maintenance pack 12.1.3 on current 12.1.1.
Platform is Linux
I am refering to "Oracle E-Business Suite Release 12.1.3 Readme [ID 1080973.1]"
Please confirm if these steps are ok to follow or not
*1). Database Preparation.*
I refered the note "Database Preparation Guidelines for an E-Business Suite Release 12.1.1 Upgrade [ID 761570.1]"
1.1). As i am on R12.1.1 with default database (11.1.0.7) i would choose patch E -> section B. And apply the following patches
7111245
7211965
7330434
7486407
7627743
7639602
7684818
8199107
8639653
8940108
9026927
9066130
9554727
9743057
1.2). Apply Oracle Service Patch 5880762
Apply patch 5880762.
1.3). Do i need to set the initiialization parameters??? As i am already on R12.
to disable fast validation for PL/SQL recompilations:
disablefast_validate=TRUE
2). 10g AS preparation.
As i am already on
ias_version -> 10.1.3.4.0
forms_version -> 10.1.2.3.0
Do i need to apply any patches????
3). Main course:
3.1). Apply the PATCH R12.AD.B.DELTA.3
3.2). Apply the patch 12.1.3 Patch 9239090
3.3). Apply the patch Patch 9239095
4). Post installation steps:
4.1). Apply mandatory Patch 9817770
4.2). Apply mandatory Patch 9966055
4.3). Run autoconfig, create appsutil.zip for db tier, run preclone on both tiers
4.4). Apply the NLS translation patch 9239090
Thanx
taherHi Taher
Most of your questions have been answered already, but here is a complete summary of answers to all your questions.
Q 1.1). As i am on R12.1.1 with default database (11.1.0.7) i would choose patch E -> section B. And apply the following patches
A 1.1). "path E -> section B" is the correct path for you.
The database patches required for 12.1.3 are the same as for 12.1.1, so they should already have been applied, but since it is possible that new patch requirements were released after you did the 12.1.1 installation you should re-check that you have the required patches.
The quickest way to find out which patches have been applied is as follows; (note, since the output of opatch changes between versions you might need to fine-tune the first command to get the desired results)
a) Retrieve a listing of existing patches
opatch lsinventory | grep 'applied on' | awk '{print $2}' > appliedPatches.txt
b) Create a file (newPatches.txt) with a listing of the new patches that need to be applied
c) cat newPatches.txt | grep -v -f appliedPatches.txt
You will get a list of patches that have not been applied.
NOTE: Not all database patches are necessarily relevant to your environment, but since is it difficult for an Apps DBA to determine which patches are not relevant then it is strongly recommended that you apply all the patches.
Q 1.2). Apply Oracle Service Patch 5880762
A 1.2). This patch is an 11i patch which is only required when you are upgrading from 11i to R12.1.1. You don't need this patch.
Q 1.3). Do i need to set the initiialization parameters??? As i am already on R12.
A 1.3). The "_disable_fast_validate=TRUE" is a compulsory setting that is required for certain types of upgrades. If you don't set this parameter then you could encounter problems during the patch.
You must unset this parameter after the upgrade.
Q2). 10g AS preparation.
As i am already on
ias_version -> 10.1.3.4.0
forms_version -> 10.1.2.3.0
Do i need to apply any patches????
A2). The same applies as for the database patches. i.e. the patches required for 12.1.3 are the same as for 12.1.1, so they should already have been applied, but since it is possible that new patch requirements were released after you did the 12.1.1 installation you should re-check that you have the required patches.
You need to confirm that the patches listed in the "Apply Any Additional Patches" (in both notes 437878.1 and 728531.1) have been applied. Use this command on the web server to create a file with a list of applied patches;
opatch lsinventory | grep 'applied on' | awk '{print $3}' > appliedPatches.txt
Q3). Main course:
A3). All of question 3 is 100% correct
(NOTE: You only need the NLS patch if you are running a language other than American English)
Regards
Frank -
I m new in weblogic. Can any one tel me , whats mean by the service packs in weblogic server.
What are the service packs available for weblogic server versions 8, 9, 10 and 11g.Hi,
Service Packs are the Fixes (For the known issues) which are published as part of a New Build of respective WebLogic Major Version.
Feature vise or API wise we will not find any Changes in the Same WebLogic Version'e Maintenence Pack(Service Pack)...New Features or APIs are included in the Next Major Version of WLS Servers...
NOTE: as part of any Serice pack New Features/Enhancements are never included...Only the Fixes goes as part of them. major Changes goes inNext release of WLS.
For WLS8.1 we have the following Maintenance packs:
WLS8.1 SP1
WLS8.1 SP2
WLS8.1 SP3
WLS8.1 SP4
WLS8.1 SP5
WLS8.1 SP6
For WLS9.2 we have the following Maintenance packs:
WLS9.2 MP1
WLS9.2 MP2
WLS9.2 MP3
For WLS10 we have the following Maintenance packs:
WLS10.0 MP1
WLS10.0 MP2
WLS10.3 (GA) onwards...No Service packs
WLS11g (Also called as WLS 10.3.1)
WLS10.3.2
WLS10.3.3
Service packs are available...
Thanks
Jay SenSharma
http://weblogic-wonders.com/weblogic (WebLogic Wonders Are Here) -
Error While Applying 11.5.9 Maintenance Pack
Hi all,
Please can anybody guide me what to do for these errors which are coming while I am a Applying 11.5.9 Maintenance Pack (I did log a TAR or SR for this but its taking time for Oracle to come back and its pretty urgent for my client)
The error is coming while I am running 'peupgptu.sql' and the error is as follows -
ERROR at line 1:
ORA-20001: DateTrack update not allowed for a record which started today
Cause: You have tried to complete a date effective update for the record
which starts on the same day.
Action: Change your DateTrack mode to correction or alter your
effective
date.
ORA-06512: at "APPS.DT_API", line 2166
ORA-06512: at "APPS.PER_PTU_SHD", line 500
ORA-06512: at "APPS.PER_PTU_UPD", line 687
ORA-06512: at "APPS.PER_PTU_UPD", line 825
ORA-06512: at "APPS.HR_PER_TYPE_USAGE_INTERNAL", line 306
ORA-06512: at "APPS.HR_PER_TYPE_USAGE_INTERNAL", line 694
ORA-06512: at line 192
ORA-06512: at line 354
Later on we did changed the start date of the errored records but now we are not even able to login into APPS.
Has anybody faced similar kind of problem.
(we are upgrading from Oracle Financials 11.5.5 to 11.5.10.2 and Platform is HP Tru64 UNIX)
Thanks,
HPHi,
Have you looked for this error at Metalink's site?
Try to look to this Note:298811.1 "Patch 2669606 Failed On Peupgptu.sql With ORA-20001 ORA-6512".
HTH.
Kind regards,
Francisco Mtz. -
Do I need to set system env variables for weblogic and SOA server installation?
Hi All,
I already have two weblogic application servers on my machine(that were installed by others).
I observed some environment variables were also set in System variables(ORACLE_HOME,WEB_SERVER_HOME etc) section in Env variables section(Start Menu---> Computer --> properties ---).But why do we need to have system environment variables wherein we already have those variables in files like setDomainEnv.bat or/and setSOADoaminEnv.bat for each server.
And one more thing system variables will be applicable for all servers(the whole machine) right.It may spoil the installation of new servers and present servers as variables should be unique to each server.
I want to install weblogic and SOA server installation.
So Can I remove the existing system variables(as they will applicable for every server) and install weblogic and SOA server installation without setting up the environment variables?
Especially I have multiple Weblogic servers,In that case how it would be to have environment variables(JAVA_HOME,WL_HOME,ORACLE_HOME etc)?
Please guide me on this to installl SOA suite .
Thanks in advanceHi All,
I already have two weblogic application servers on my machine(that were installed by others).
I observed some environment variables were also set in System variables(ORACLE_HOME,WEB_SERVER_HOME etc) section in Env variables section(Start Menu---> Computer --> properties ---).But why do we need to have system environment variables wherein we already have those variables in files like setDomainEnv.bat or/and setSOADoaminEnv.bat for each server.
And one more thing system variables will be applicable for all servers(the whole machine) right.It may spoil the installation of new servers and present servers as variables should be unique to each server.
I want to install weblogic and SOA server installation.
So Can I remove the existing system variables(as they will applicable for every server) and install weblogic and SOA server installation without setting up the environment variables?
Especially I have multiple Weblogic servers,In that case how it would be to have environment variables(JAVA_HOME,WL_HOME,ORACLE_HOME etc)?
Please guide me on this to installl SOA suite .
Thanks in advance -
Maintenance pack on multi node env
Hi
I wants to apply the maintenance pack u3480000 on a multinode environment .
I know , in a multinode environment we have to apply the patch in admin node first and then to remaining nodes.
My question is
Applying maintenance pack takes more than 24 hours to complete, whats the best practice to apply maintenance pack on a multinode env since I have to apply on both the nodes (admin and apps) logically which takes 24 + 24 hours to complete ?
I assume that we have to start the adpatch with some options ....
Pls correct If i am wrong ...
Thanks
RajanBut still I am little confused , could u pls shortly explain what will u do in this case? Rajan,
If you check the note posted above, you would find many techniques which would help to estimate the time and reduce it when applying the patch on the production instance. Applying the patch on the Test instance first would perform an analysis of the effects of applying a patch, and let you know how long it takes to apply it on production. In addition, you would be able to address any issues which might encounter during the upgrade.
You may also use Distributed AD reduce downtime by efficiently utilizing all the available resources on a shared application file system (In case you have Shared Application Tier File System).
Please review the note one more time, and if you are still confused, please feel free to ask.
Good Luck :) -
Spring Facet not available in Weblogic Enterprise Pack for Eclipse?
Hi guys, just wondering if the Spring Facet will be available for the Weblogic Enterprise Pack for Eclipse? If yes, when can we expect this to be released?
Spring Facet and other integration with Spring IDE will be in the next release of Oracle Enterprise Pack for Eclipse, which will ship in the next couple of months.
- Konstantin -
Hi,
Can anyone advise when Weblogic Service pack 5 for v5.1 will be available?
Thanks
BrianI have heard that it will be in a week or so. If you have a problem that is
urgent, definitely pursue it with technical support.
Thanks,
Michael
Michael Girdley
Product Manager, WebLogic Server & Express
BEA Systems Inc
"Brian Short" <[email protected]> wrote in message
news:39801598$[email protected]..
Hi,
Can anyone advise when Weblogic Service pack 5 for v5.1 will be available?
Thanks
Brian -
hi all
i just want to install interwoven in my 2000 server but i have only weblogic
service pack 2 but i need weblogic server 6.0 service pack 6 pls help me to
find out in bea site
thanks
MAhesh
For WLS 6.0 the most current service pack is 6.0 sp2 rp2 (rolling patch 2 over
service pack 2)
There is no service pack 6 out there yet for WLS6.0
If its WLS5.1 then the latest sp is sp10 which is available on the website
Check with interwoven on the exact requirements
yeshwant
Rajesh Kumar K wrote:
> hi all
>
> i just want to install interwoven in my 2000 server but i have only weblogic
> service pack 2 but i need weblogic server 6.0 service pack 6 pls help me to
> find out in bea site
>
> thanks
>
> MAhesh
-
I want to install the maintenance packs for HRCS 9.0 and I want to use the other language not only English. Should I need to install the maintenance packs Multi-Language only or I must install both the Multi-Language packs and English packs? For example, should I install the PeopleSoft Enterprise Human Resources Management System and Campus Solutions 9.0 - Maintenance Pack 6 - Multi-Language only or both the PeopleSoft Enterprise Human Resources Management System and Campus Solutions 9.0 - Maintenance Pack 6 - Multi-Language and PeopleSoft Enterprise HRMS and Campus Solutions 9.0 - Maintenance Pack 6?By the way, after I have installed the Maintenance Pack 6,I use ctrl+j to see the information of my peoplesoft system and I found that the Service Pack is 0 still. Why?
Hi All,
This is the web site that is built to help the consultant who is having problem in implimentation, support & while practice. But you are playing is this to gain point Both the reddy. from morning you ask the query & other on replays. this in not fair.
Stop this things immediatly.
pherasath
Maybe you are looking for
-
I just updated the ios 6.1.3 to my ipod and now i don't know how to put music in it
any thing will be helpful i need the music so tomorrow for a party
-
HT1937 I am not able to make a call from my phone.
Sir, this is a very peculiar kind of problem I am facing and it has made my life terrible because not even your service providers are able to help me. I bought my phone from (Maharashtra-Mumbai, India) and my network operator is (airtel). My phone wo
-
Slow moving iPad 2 (kind of)
Hello I have an iPad 2 for 4 months now, and I've added several music, apps, videos and other media in the device. And I've realized last week that my iPad 2's startup (from sleep) / opening, is slow for my opinion (1 second just after clicking home
-
IMac crashes when editing heavy photo's in iPhoto
Dear iMac professors, Since two months I am using a new camera with pictures that are (even) heavier than before (up to 20Mb). When editing the pictures it looks like my iMac (dating from 2009 - yes, it is time to upgrade...) can't handle them. This
-
Hi iMovie 11 (9.0.8) is constantly crashing when I export the video. Mountain Lion 10.8.2 Thanks