Weblogic on Intel Solaris(x86)

How to install weblogic 5.0 on intel solaris ..
I have weblogic 5.0 for sparc ..
And I am not finding any weblogic for intel solaris in platform sections at weblogic site...
Can I use sparc's weblogic for intel..
Please suggest me..
thanks,
Laxman.

Weblogic 6.1 SP1 & SP2 works more or less on
solaris 8 for intel if you switch of native
ssl and are not trying to use clustering.
Note: this is my personal experience, bea
does NOT support such a configuration
Michael Young <[email protected]> wrote:
Hi.
For WLS 5.1 the zip installation for unix machines is the same, but more
importantly we do not
support Solaris/Intel platforms. Even if you install ok the native libs
for solaris are all for
sparc platforms so I don't know if it will run.
Your best bet is to run on one of our supported platforms per
http://edocs.bea.com/wls/platforms/index.html.
Regards,
Michael
Laxman wrote:
How to install weblogic 5.0 on intel solaris ..
I have weblogic 5.0 for sparc ..
And I am not finding any weblogic for intel solaris in platform sectionsat weblogic site...
Can I use sparc's weblogic for intel..
Please suggest me..
thanks,
Laxman.--
Michael Young
Developer Relations Engineer
BEA Support

Similar Messages

Support for JRockit for WebLogic 10.3 in Solaris x86

Hi All,
I am trying to install JRockit Mission Control 3.1.2 in a Solaris 10 x86 platform.
For Solaris Spark I know there is a special distribution.. For Solaris 10 x86 I am trying to install the generic linux version.
When I try to install the jrmc-3.1.2-1.6.0-linux-ia32.bin I get the following error:
jrmc-3.1.2-1.6.0: Cannot find /lib/ld-linux.so.2
I also try with 64bit edition of the jrockit mission Control but I get a similar error but trying to find the /lib64/ld-linux.so.2.
Is Solaris 10 x86 supported? Or at least, is there a workaround to install it?
I find some site talking about JRockit for Solaris Spark, but seems to me that Solaris x86 is not supported...
Thanks in advance
Pablo

Hi,
The DTD used in "web.xml" should not cause any issue ...though it's the OLD "web.xml"...Please try to run the Following command to Generate the New Deployment Descriptors from the Existing Application:
Step1). Open a Command Window and Run "setWLSEnv.sh" or "setWLSEnv.cmd".
Step2). In the Command Prompt move to the Current Directory where you have placed your Application and then Run the Following Command
java weblogic.DDConverter -d NewDDs jamagent.war
Here Above Command Will read the "jamagent.war" War archive and then It will generate the New DDs in "NewDDs" directory...Which we need to replace with the OLD DDs present in our WebApplication..
Thanks
Jay SenSharma
http://jaysensharma.wordpress.com (WebLogic Wonders Are Here)

Weblogic Server 9.2 MP 3 for Solaris x86

Does anyone know where I can download weblogic server 9.2 mp 3 for Solarix x86. I have spent my entire day looking for it in support.oracle.com (metalink) and oracle download pages but nothing has turned up so far.

You can always ask via support.
There is a download on edelivery.oracle.com. Select Oracle BEA then Solaris x86 32bit - then click on BEA WebLogic Media Pack for Sun Solaris x86 (x86, x86-64)
You'll see a 9.2 MP3 ISV download, I'm not sure if that's exactly the same as the normal one or if it's only for ISV's, you'd have to ask support.

Weblogic 8.1 for solaris x86 download

hi, i'm looking for weblogic 8.1 for solaris x86, where i can download the files?
thanks

hey thanks for the reply, sorry for my late response, well last time i was found the archive of all BEA Release Product with metalink account, i was downloaded the weblogic 8.1 SP4 for solaris x86.. the installation seems fine, until i try to create the domain.. here is my step installation
-bash-3.00$ ./config.sh
Java Accessibility Bridge for GNOME loaded.
Unable to instantiate GUI, defaulting to console mode.
<--------------------- BEA WebLogic Configuration Wizard --------------------->
Create or Extend a Configuration:
Choose between creating and extending a configuration. Based on your selection, the Configuration Wizard guides you through the steps to generate a new or
extend an existing configuration.
->1|Create a new WebLogic configuration
| Start here to create a WebLogic configuration in your projects
|directory.
2|Extend an existing WebLogic configuration
| Start here to extend an existing WebLogic configuration. Use this
|option to add applications and services, including Database access (JDBC)
|and Messaging (JMS). This option also enables you to extend functionality
|by enabling WebLogic Workshop.
Enter index number to select OR [Exit][Next]> 1
<--------------------- BEA WebLogic Configuration Wizard --------------------->
Select a Domain Template:
Please select a template from the list or select another directory of templates.
* [wildsoft/oracle/weblogic81/common/templates/domains]
1|Basic WebLogic Workshop Domain 8.1.4.0
| BEA Systems, Inc.
| Create a basic WebLogic Workshop domain, without installing sample
|applications. Domains created from this template will support the
|WebLogic Server and WebLogic Workshop runtime functionality, including
|support for J2EE applications, Web applications, Web Services and custom
|controls. Use domains created from this template for development of
|WebLogic Workshop applications.
->2|Basic WebLogic Server Domain 8.1.4.0
| BEA Systems, Inc.
| Create a basic WebLogic Server domain without installing sample
|applications.
3|WebLogic Server Examples Domain 8.1.4.0
| BEA Systems, Inc.
| Create the WebLogic Server Examples domain in a directory outside of the |installed kit. The Examples domain contains a collection of examples to
|show best practices for coding individual J2EE APIs.
4|Avitek Medical Records Sample Domain 8.1.4.0
| BEA Systems, Inc.
*Enter index number to select OR [Down][Exit][Previous][Next]> 2*
<--------------------- BEA WebLogic Configuration Wizard --------------------->
Choose Configuration Option:
*Do you want to run the wizard in express mode?
->1|Yes
2|No
*Enter option number to select OR [Exit][Previous][Next]> 1*
<--------------------- BEA WebLogic Configuration Wizard --------------------->
Configure Administrative Username and Password:
Create a user automatically assigned to the Administrative Role. This user is
the default administrator used to start development mode servers.
| Name | Value |
_|_________________________|_________________________________|
1| *User name:       |            weblogic             |
2| *User password:     |                                 |
3| *Confirm user password: |                                 |
4| Description: | The default administration user |
Select Option:
1 - Modify "User name"
2 - Modify "User password"
3 - Modify "Confirm user password"
4 - Modify "Description"
*Enter option number to select OR [Exit][Previous][Next]> 2*
<--------------------- BEA WebLogic Configuration Wizard --------------------->
Configure Administrative Username and Password:
Create a user automatically assigned to the Administrative Role. This user is
the default administrator used to start development mode servers.
"*User password:" = []
Input new User password: OR [Exit][Reset][Accept]> weblogic1*
<--------------------- BEA WebLogic Configuration Wizard --------------------->
Configure Administrative Username and Password:
Create a user automatically assigned to the Administrative Role. This user is
the default administrator used to start development mode servers.
| Name | Value |
_|_________________________|_________________________________|
1| *User name:       |            weblogic             |
2| User password:     |            ******** |
3| *Confirm user password: |                                 |
4| Description: | The default administration user |
Select Option:
1 - Modify "User name"
2 - Modify "User password"
3 - Modify "Confirm user password"
4 - Modify "Description"
5 - Discard Changes
*Enter option number to select OR [Exit][Previous][Next]> 3*
<--------------------- BEA WebLogic Configuration Wizard --------------------->
Configure Administrative Username and Password:
Create a user automatically assigned to the Administrative Role. This user is
the default administrator used to start development mode servers.
"*Confirm user password:" = []
Input new Confirm user password: OR [Exit][Reset][Accept]> weblogic1*
<--------------------- BEA WebLogic Configuration Wizard --------------------->
Configure Administrative Username and Password:
Create a user automatically assigned to the Administrative Role. This user is
the default administrator used to start development mode servers.
| Name | Value |
_|_________________________|_________________________________|
1| *User name:       |            weblogic             |
2| User password:     |            ******** |
3| Confirm user password: |            ******** |
4| Description: | The default administration user |
Select Option:
1 - Modify "User name"
2 - Modify "User password"
3 - Modify "Confirm user password"
4 - Modify "Description"
5 - Discard Changes
*Enter option number to select OR [Exit][Previous][Next]>next*
<--------------------- BEA WebLogic Configuration Wizard --------------------->
Domain Mode Configuration:
Enable Development or Production Mode for this domain.
->1|Development Mode
2|Production Mode
*Enter index number to select OR [Exit][Previous][Next]> 1*
A fatal error has occured. This application will terminate.

General Availability of Weblogic Platform on SOLARIS on X86?

I've seen an announcement on Sun's web, but I can't find anything for Solaris x86 on Bea's download page...
When it will available for download?
Thank you.
DanielD

hi all
i have got the solution by myself
i have verified the file config.xml in which the JAVA_HOME path was set to the jdk1.5.0
this version of jdk is not supported by the weblogic 8.1 sp5, so i have changed that path and given as jdk 1.4.11 path and
also i have changed the JAVA_HOME path in the system to the same path
now i am able to configure the servers inside the weblogic installation
and further i am able to create the managed servers

Oracle 8.1.5 Client/WLS/Solaris x86

has anyone been able to get Oracle's client 8.1.5 running on Solaris x86 in conjunction with WLS to talk to back-end Oracle? Any help would be greatly appreciated.thanks.

This will not work. We have not built the native libraries to work with
Solaris on Intel..
I suggest trying the platform independent type 4 JDBC driver available for
free from Oracle. It is supported (as is any JDBC driver) with WebLogic
Server. To download it:
Go to http://www.oracle.com and select the "Download" option.
From the resulting page, use the "Select Utility or Driver" dropdown to
select Oracle JDBC drivers
From the resulting page, scroll down a little (since SQLJ stuff appears at
the top).
Or, to go directly there:
http://technet.oracle.com/software/tech/java/sqlj_jdbc/software_index.htm
Thanks,
Michael
Michael Girdley
BEA Systems Inc
"Dean Davis" <[email protected]> wrote in message
news:3a267487$[email protected]..
has anyone been able to get Oracle's client 8.1.5 running on Solaris x86in conjunction with WLS to talk to back-end Oracle? Any help would be
greatly appreciated.thanks.

Core 2 Duo and solaris x86 11/06 works for me

This is FYI, since I seen (and posted) problems, but I haven't seen the solution posted.
I have successfully gotten solaris x86 11/06 to install and run on my core 2 duo machine. I had tried solaris x86 06/06, but I could only run in 32bit mode until patch 118855-19 was installed. It looks like 118855-33 is the baseline for 11/06.
With 06/06 I had to edit the grub command and add " kernel/unix" to the end of the 2nd line. This would force 32 bit mode rather than 64 bit. If I tried 64 bit, it would enter an endless reboot cycle. Once I installed the patch to 118855-19 I could run solaris 10 06/06 in 64 bit mode without issue.
Again, since solaris 10 11/06 is at 118855-33, it runs on my core2 machine straight from the install.
Hope this helps

On a laptop there is little point with running a 64-bit operating system unless it physically has more than 4gb of ram, or if you are processing datasets exceeding 4GB of ram. Unless you're into assembly or use Solaris for some reason to manipulate media, little is to be gained by using 64-bit versions if anything. The increased pointer, integer, and padding causes more memory to use for the same software, most software on 64-bit operating systems runs in 32-bit mode because there is no need to have 16 exabyte memory addressing capability for anything but media encoders, giant databases, or extremely bloated single-threaded software. Sun Java Creator takes a heck of a lot of ram, but even at peak it's still under 4GB. If you move files bigger than 4GB, the ability to memory map all 4096MB might have less overhead on a 64-bit operating system, but generally from an end-user perspective, especially on a fast Intel or Opteron system, you won't notice the difference much. Solaris is bi-arch, a large chunk of Windows Vista and XP x64 is bi-arch, and most of FreeBSD and Linux are bi-arch in 64-bit versions, as I said, no point in making everything 64-bit. 64-bit device drivers is an issue for every OS, you should stick with 32-bit on a laptop, and hold off on desktops unless you need extended assembly registers available only in 64-bit mode.

Solaris x86 or Solaris 8

What is the latest version of solaris on intel called? Is it generic
across intel boards? Are there some pitfalls to look out for (i.e.
only runs on 400 MHz or less, only a handfull of graphic cards, etc.)
What is the best C/C++ compiler? Does it support Visual Workshop?
How about Motif? What version? We were using Motif 1.2.4 on X11R5
from ICS, is this OK? Any heads up would be helpful. Thanks in advance.

Solaris 8 is currently available at
http://www.sun.com/software/solaris/binaries/index.html
Not sure what you mean by "generic across intel boards" - it's the
same kernel, but drivers will differ depending on your H/W config -
see the HArdware Compatibility list:
http://soldc.sun.com/support/drivers/hcl/index.html
There are freeware e.g. GNU compilers - go to sunfreeware.com
For serious commercial development, the Sun Workshop tools are
available - Workshop 5 is shipping now and you can get a WS6 early access at the access1.sun.com website.
CDE seems to have taken over from Motif. For details on X11R6 features etc, follow the first link below:
- www.sun.com/solaris
- www.sun.com/intel (For Solaris on the Intel Platform)
- www.sunfreeware.com (take a look at the "Other Useful Sites")
- www.egroups.com (do a search on Solaris, many questions already answered)
- Newsgroups (alt.solaris.x86, comp.unix.solaris)
- www.webring.org/cgi-bin/webring?ring=solarisunix;list
- www.SolarisCentral.org
- metalab.unc.edu/pub/packages/solaris/i86pc/
- http://solarisguide.com
- dan.carlsbad.ca.us/faqs/s86faq.html
- solarisguide.com
- http://fishbutt.fiver.net
- http://www.sunhelp.org/

Solaris x86 with card on-board

Hi all,
I got a problem when installing Solaris9 x86 on ibm NetVista Machine.
I have installed 2 other machines with separated network card sucessfully. I can configure to connecto to my LAN network.
But when install on 2 ibm NetVista machines (which include onboard network card ), It is fail to be configured to connect to the network in both following cases:
Case 1: I choose proper driver as Sun suggest for Intel VE Pro(R) 10/100 : iprb. And the Solaris detect successfully. I checked by "ifconfig -a" and saw the network card active on "iprb0".
Next, I following correct instructions to configure the network card to connect to the LAN. But when i ping IP (9.187.186.18) to other computer in our same subnet LAN,
The system display eg: "No anwer from 9.187.186.18"
I run the "snoop" command to view broadcasr ARP in an other terminal. The snoop terminal displays ARP signal boradcasting from the Solaris. However, it can nerver get ARPs from other computer in LAN.
Case 2: I add 3COM network driver to the solaris ( onboard card is no loger used ). The system can auto-detected this card and i can configure to connect to the network. The problem remain unchange.
Is there any special in IBM Netvista machine need to be configure under Solaris x86 or any particular configuarion for on-board network card. ???
Can any boy help me to solve this problem ??
Best regards,
Thang,
Vietsoftware Developer

However, it can nerver get ARPs from other computer in LAN.Are you perhaps running "snoop" on a box different from the one that you're trying to ping, and are you using
a switched ethernet? In that case it would be OK if you only see the ARP broadcast, because the ping target
box will send the ARP reply directly to the MAC of the requesting station (i.e. there's no ARP broadcast reply),
and an ethernet switch will send the ARP reply directly to the port where the station with the given destination
MAC is connected - no other port should see the reply.
If you're trying to ping 9.187.186.18 from the new Solaris x86 box, try to run snoop on the 9.187.186.18
system. 9.187.186.18 should see the ARP broadcast from the LAN, and the 9.187.186.18 box should list the
ARP response it sends back to the LAN.
Is there any special in IBM Netvista machine need to be configure under Solaris x86 or any particular
configuarion for on-board network card. ???I guess the interrupt handler for the NIC is not working, so the Solaris x86 sees no incomming packets.
See the "troubleshooting" section on the following page:
http://solaris-x86.org/documents/tutorials/rtls.mhtml

Connect to Oracle database from Perl on Solaris x86

Hi,
How can I connect to Oracle database using Perl scripts on Solaris x86. It seems that DBD-Oracle Perl module requires Oracle client installed to work. Is there any Oracle client available for Solaris x86? Any one got a workaround? Thanks.
Angus Lee

Yes, you absolutely must have some portions of the rdbms installed before you can proceed. If your Solaris x86 machine is only a client, then you can get away with installing just ?/rdbms/mesg and ?/rdbms/lib.
I have Oracle 7.3.4, 8.0.5, 8.0.6, and 8.1.6 for Intel Solaris 2.6. I don't know if they'll run on Solaris 8 or 9 but I'm trying to upgrade at this very moment. As long as you conform to Oracle developer license, then you may download them from my machine.
I believe the reason Oracle dropped their Intel Solaris port is probably because Sun went through a period where they themselves dropped their Intel port. They've picked back up and if enough Oracle on Intel Solaris customers scream, then Oracle might pick it back up again too.
Send me an email if you're interested in the downloads.

How to recompile the Intel Solaris kernel

HI,
I installed Intel solaris on x86 system. As per the manual U should change parameters in /etc/system file to configure semaphores and kernel memory . After updating the /etc/system file ,restart is required to take parameters in effect. But even after reboot the system is not getting configured as per the /etc/system settings.
Is there any other way to recompile the kernel?
Please let me know on [email protected]
Thanks in Advance,
Sagar

You never recompile the Solaris kernel. Exactly what are you putting in /etc/system? How are you determining whether or not the changes took effect? What release of Solaris?

Oracle for Solaris X86

I would like to know where I can download the latest version of orace for the solaris on Intel os.
I have searched oracle and cannot seem to find it.
Any suggestions.

Besides click the ContactOTN in web page to submit the question
about this to them, I follow the link
http://platforms.oracle.com/sun/index_sun.htm and click "Ask Us"
link to send message to them too.
Am I wrong ? Can you give me the correct way to ask the question
KK
jeamaro (guest) wrote:
: KK (guest) wrote:
: : I read through the news group and find some mention there is
: : a version Oracle for solaris x86. Then I go to
: : http://platforms.oracle.com/sun/index_sun.htm too.
: : Can anyone tell me the straight method to get it ?
: : I have already sent several mail to ask about that.
: : There is nothing return.
: : KK
: There is a version of Oracle for Solaris x86. Although it has
: not been available thru OTN. To which email ID have you been
: sending your questions?
: Regards
null

Native Performance pack for Intel Solaris

Do we have native performance pack for Intel Solaris? We are using
Weblogic 4.5.1
Thanks
Nagaraj

You have to add that directory to you LD_LIBRARY_PATH, not PATH
K.P. Patel <[email protected]> wrote in message
news:[email protected]..
never mind... I got it.. For some odd reason, I restarted weblogic few
times...and it picked up....
thanks
"K.P. Patel" <[email protected]> wrote in message
news:3ad64fb6$[email protected]..
yep, these property was set to true already....still doesn't load
performance pack
"Kumar Allamraju" <[email protected]> wrote in message
news:[email protected]..
Add the following property in weblogic.properties file.
weblogic.system.nativeIO.enable=true
Kumar
"K.P. Patel" wrote:
How do I include/install performance pack on my Solaris system for
WLS
5.1
I included $WAS_HOME/lib/solaris in my PATH in the startup script
which
didn't help any
thanks
kp

OS metrics for Intel Solaris

where can i find the Solaris Intel OS metrics?
Best Regards,
Guruprasad S

Solaris x86 download of 7.0 update 2 is available:
http://wwws.sun.com/software/download/products/3f7df408.html
7.1 will also be available on Solaris x86.

AppServer for Intel Solaris

How about an Intel/x86 platform Solaris version of Sun ONE Application Server?

Solaris x86 download of 7.0 update 2 is available:
http://wwws.sun.com/software/download/products/3f7df408.html
7.1 will also be available on Solaris x86.

Weblogic on Intel Solaris(x86)

Similar Messages

Maybe you are looking for