Weblogic on Linux and LiveCycle on Windows??

Hello!
I have the feeling I'm going to ask a terribly stupid question... whatever, here it goes...
A client has Weblogic running on Linux and would like to install LiveCycle on Windows using this Weblogic as application server.
Possible at all?
Thank you for any ideas - please bear with me in this one.
Marcos

Yes, it is possible to install LiveCycle on Windows but targetting Linux.

Similar Messages

CI/DB under Linux and AS under Windows - Possible?

Hello all,
I have an ECC6 running on Linux/Oracle.
For some interface reason I need my production to communicate to a MS SQL Server Database - we found out that the best solution was to install a new Application Server under Windows.
Is it feasable? If yes what are the constraints or does anyone can give me the procedure.
Thanks for your time and your help.
Regards,
Mel

hi melchior,
Why not installing MS SQL on Windows Server and connect it to your SAP system without have to install SAP system on this Windows host ?
It's possible to install SAP system on heterogent system. For UNIX/Linux and Windows system, you need to manage SAMBA service.
ardhian
http://ardhian.kioslinux.com
http://sapbasis.wordpress.com

Help! Unable to Start - weblogic.policy - (Linux) and WLS 5.1

Does this hold true for NT as well? The comments in the weblogic.policy file read:
// If WebLogic is not installed in a root directory, you must only
// list the first component of the path in the "file:" URL. This is
// because of a bug in JavaSoft JDK 1.2.1. For example, if you
// install WebLogic in the "c:/test/weblogic" directory, the first
// two lines below must be:
// grant codeBase "file:/c:/test/-" {
// permission java.io.FilePermission "c:${/}test${/}weblogic${/}-", "read,write,delete,execute";
However, when I use the similar file structure:
grant codeBase "file:/c:/bea/-" {
permission java.io.FilePermission "c:${/}bea${/}wlserver6.0sp1${/}lib${/}-",
"read,write,delete,execute";
I receive the same error and WebLogic Server will not start up.
Thanks for your help.
Tawnya
Mark Griffith <[email protected]> wrote:
If you have a directory :
/usr/local/releases/451/weblogic
in that dir lives:
weblogic.policy
that policy file should say:
grant codeBase "file://weblogic/-" {
NOT
grant codeBase "file://usr/local/releases/451/weblogic/-" {
mbg
In article <[email protected]>, [email protected]
says...
ENV:
Redhat Linux 6.2 (Current Kernel)
Weblogic Server 5.1
Sun JDK for Linux version 1.2.2
It seems like I am having a weblogic.policy problem. I have read the
documenattion over and over and still cannot figure out this problem.
I have weblogic installed on /usr/local/weblogic directory
I Start with the command line:from the startWebLogic.sh Script
$JAVA $JAVA_OPTIONS -ms64m -mx64m -classpath $JAVACLASSPATH
-Dweblogic.class.path=$WEBLOGICCLASSPATH -Djava.security.manager
-Djava.security.policy=='pwd'/weblogic.policy
-Dweblogic.home=. weblogic.Server
I followed all the instrcutions on modifying the weblogic.policy
file.
example:
grant codeBase "file:/usr/local/weblogic/-" {
permission java.io.FilePermission "${/}usr${/}local${/}weblogic${/}-",
"read,write,delete,execute";
I still get the following :
Exception in thread "main" java.security.AccessControlException:access
denied (java.lang.RuntimePermission createSecurityManager )
at
java.security.AccessControlContext.checkPermission(AccessControlContext.java
:191)
at
java.security.AccessController.checkPermission(AccessController.java:399)
at
java.lang.SecurityManager.checkPermission(SecurityManager.java:545)
at java.lang.SecurityManager.<init>(SecurityManager.java:303)
at
weblogic.boot.ServerSecurityManager.<init>(ServerSecurityManager.java:11)
at weblogic.Server.main(Server.java:59)
at weblogic.Server.main(Server.java:55)
Can anyboby Help me out here?
Tony McClay
Mr. BigMAN--
==================================================
NewsGroup Rant
==================================================
Rant 1.
The less info you provide about your problem means
the less we can help you. Try to look at the
problem from an external perspective and provide
all the data necessary to put your problem in
perspective.

Y setting kernel parameters in linux and not in windows

Hi Can any one please help me out...
While installing oracle on linux we are setting some kernel parameters But when installing in windows are we setting any kernel parameters...We are not setting any parameters...can any one please explain why r we setting kernel parameters and what is the use of those parameters and why are we not setting any parameters in windows.

probably because linux != windows
anyway, there are still some recommendation you can follow, for example if you want to use more than 2Gb of memory in win32

Tutorial - How to triple boot OSX, Linux and Windows 8.1 with a shared Data Partition without any third party Win / OSX softwares

This is not a question, but rather a personal guide that has proved to be running successfully.
I would like to thank numerous sources, including Christopher Murphy's suggestions at:
Re: Repairing Boot Camp after creating new partition
Before proceeding, there are certain concepts needs to know:
Why Boot Camp does NOT allow further partitioning of drives after Windows has installed?
Answer: Because the way Apple configures the Mac to be recognized as non UEFI capable system on Windows.
Quote from Christopher Murphy based on the above line:
However, Windows on Macs right now use CSM-BIOS mode in Mac firmware that presents BIOS to Windows rather than EFI. Windows thinks it's on a BIOS computer, and therefore mandates the use of MBR for boot disks, rather than GPT. So that's why we have this hybrid MBR+GPT approach on Mac with Windows on it. You inherit the limitations of MBR, which is four primary partitions.
So what does it means?
It means that OSX + EFI + Recovery HD + Boot Camp partition = 4 primary partitions and thus any attempt to modify the disk will render booting issues of either system.
For more info on GPT (GUID Partition Table disks VS Master Boot Record or MBR in short, you may visit: http://msdn.microsoft.com/en-us/library/windows/hardware/dn640535%28v=vs.85%29.a spx)
So, how to overcome it?
The general guideline is to install ALL GPT ready OS first then create a Data partition, before installing Windows (Which is again, NOT supported GPT due to EFI configuration by Apple where end-users are not able to modify it).
Interestingly, since Mac Pro 2013 Late supports only Windows 8 and above, thus it is not known if this CSM-BIOS applies to it or not.
Do take note that GPT disks in Windows can only be booted when the system meets the 2 requirements:
http://msdn.microsoft.com/en-us/library/windows/hardware/dn640535%28v=vs.85%29.a spx#gpt_faq_win7_boot
1) Windows x64 version (Which is a must for newer Macs. If you cannot go to Boot Camp 5, then you need Windows 7 x86 or 32bit version)
2) UEFI system. However, Windows sees all Macs (With the possibility of Mac Pro 2013 Late is an exception. To be determined) as BIOS, or rather NON-UEFI system.
In short, booting on GPT disks is not possible for Mac in Windows.
Summary,
It is tested that a combination of the following will not work:
- OSX + Windows + Linux
- Windows + OSX + Linux
- Windows + Linux + OSX
Usually it can create the system un-bootable or OSX refused to install due to the system does not recognize such partitions and / or Disk Utility refused to format a free space. An example screen-shot is provided below:
The error message is shown as
Title: "Failed to erase volume" Message: "Failed to wipe volume, as an error occurred: MediaKit has reported that the device does not have enough free space to execute the requested operations."
The second thing is about the preparations we need.
1) 1X Windows 7 or 8 DVD or USB thumbdrive
1A) If you uses a DVD to install, you will need another thumbdrive to load the BootCamp drivers for Windows as well as may requires an external DVD drive for newer Macs
2) 1X Linux DVD of your choice. Personally I choose Fedora 20.
So ready? Let's go.
1. Using Disk Utility, shrink the OSX's partition size to what is needed. For me, I give OSX 150GB. Do NOT create any new partition.
Disk Utility should see something like below whereby only OSX partition is left with desired disk space. The remaining space are to be unused disk space for the moment.
Note: Click on the top most item that should start with the size of your HDD / SSD. Then clicked on "Partition" and specify the desired OSX size. Hit "Apply" after that.
2: Download Boot Camp drivers only via Boot Camp Assistant. The USB thumbdrive shall be used later after Linux's installation.
Boot Camp Assistant should see this:
I have only selected "Download latest Windows Support Files from Apple"
3. Insert Linux DVD, reboot Mac into EFI mode (The left most first "EFI mode").
Note 1: Before rebooting, please plugged in an Ethernet adapter because Wi-Fi drivers is not installed.
Note 2: For Thunderbolt adapters, it must be plugged in before reboot as hot-swapping is not supported under Linux. More on the tips at the end of this article.
Note 3: Press and hold "Option" after the screen turns black. Release Option key after you see the image as below:

For the unfortunate part that did not make it on time to edit the images:
9. Install the Windows Support software from your CD/USB drive to gain full functionality of your computer. Reboot and go to Windows again.
Note 1: You may choose to eject disc at this point of time. For Apple SuperDrive users, you will need to wait until the drivers (i.e. Boot Camp support files) is installed and rebooted before ejecting is reasonably possible (As I failed to figured out how to right click without the drivers)
Note 2: Unlike Windows 7 on KBase article TS4599 Keyboard/trackpad inoperative, black screen, or alert messages when installing Windows 7, USB stick can be plugged in after the Windows installation is done. This is because Windows 7 (And probably Windows 7 with SP1 DVD) does not have a built in USB 3 drivers when it was released back in 2009 where USB3 has not arrived then.
Note 3: Due to TPM, Bitlocker is not supported without the use of thumbdrives.
10. Using Disk Management to determine the given drive letter for the DATA partition (DO NOT DELETE and RECREATE partition or else you can goodbye to booting Linux and OSX). Disk Management will not allow you to format it as exFAT / FAT32 in graphical way.
Note: You may remove or modify some of the disk letters in Disk Management. However, do NOT remove / modfify the drive letter for the partition with 200MB size in HFS. This is because it will disallow booting of Linux and neither could Windows nor OSX can do anything EXCEPT to reinstall Linux only.
11. Open Command Prompt in Administrator Mode (Important!!), and key in the following command:
format F: /FS:exFAT
Give this volume a label after it has successfully formatted before hitting "Enter" again.
Note: Mine Data partition was assigned as F drive. Please make necessary adjustment to "F:" should your Data partition is assigned to other letters.
12. After that, Setup your Data partition structure as you like.
Tip: Minimally create the important folders such as:
- Music
- Documents
- Movie (Videos)
- Downloads
- Pictures
All these folders are commonly used by the 3 OSes. I do NOT recommend changing of /home (OSX and / or Linux) and / or user home directory (Windows) either partially or as a whole.
This is because of compatibility issue.
On a side note, iTunes Media Library used in OSX and Windows are NOT able to be use interchangably due to hard-coded path used.
13. Useful troubleshooting in Fedora / Linux:
With references to these:
http://chaidarun.com/fedora-mbp
http://anderson.the-silvas.com/2014/02/14/fedora-20-on-a-macbook-pro-13-late-201 3-retina-display/
http://unencumberedbyfacts.com/2013/08/16/linux-on-a-macbook-pro-101/
I would like to highlight a few important points:
1) Wi-Fi driver:
http://rpmfusion.org/Configuration
Note 1: The sound driver should be installed at Out of Box Experience. However, the Wi-Fi is not.
Note 2: Install both free and non-free repository. By the way, some other software like VLC can only be found after the Free Repository is installed.
Search for "akmod-wl" in Gnome-Package-Installer in order to install Wi-Fi drivers
Note 3: For those who do not have Ethernet adapters and their Mac does NOT have a built-in Ethernet port, it is recommended to get one. This is because Fedora 20 does not have a good support for iPhone USB tethering. Unsure for Andriod / Blackberry / Windows Phone users.
2) Grub Menu:
It will show several options to boot into OSX, even of the capability to boot into x86 or x64 mode. However, neither of them is bootable except Linux and the rescue.
Hence, it is recommended to remove the items by hand in this file:
/boot/efi/EFI/fedora/grub.cfg
Command to be used:
"sudo gedit /boot/efi/EFI/fedora/grub.cfg"
Parts to be removed:
- For any extra kernels, delete the target entry by locating the line "menuentry" under "/etc/grub.d/10_linux" sector to one line above the next "menuentry".
It is recommended to keep one main kernel, and one recovery at the minimal.
- For other OS, delete all the entry (Since neither it can works) under "/etc/grub.d/30_os-prober" sector without removing the lines starts with ###.
Auto Mount exFAT partition:
- After installing extra packages for exFAT support (Since it is not supported by Fedora 20 from a default installation), you may wish to edit "/etc/fstab" in order to mount the exFAT partition during boot time.
Command to be used:
"sudo gedit /etc/fstab"
Add the following line in gedit:
UUID=702D-912D /run/media/Samuel/DATA exfat defaults 1 2
Note 1: For DATA partition, OSX & Boot Camp partition, Fedora defaults mounts under: "/run/medua/<Username with case sensitive>/<Partition Label Name>"
Note 2: UUID is unique ID. You can find out the UUID by:
Step 1: First determine the DATA partition number:
"sudo gdisk /dev/sda"
Step 2: Determine the UUID of this partition number:
"sudo blkid /dev/sda8"
Reference 1: http://manpages.courier-mta.org/htmlman5/fstab.5.html
Reference 2: http://liquidat.wordpress.com/2007/10/15/short-tip-get-uuid-of-hard-disks/
3) Overheating CPU
Solution is to issue the following command in Linux terminal: su -c "echo -n 1 > /sys/devices/system/cpu/intel_pstate/no_turbo"
4) System resumes immediately after suspend
Solution is to issue the following command in Linux terminal: su -c "echo XHC1 > /proc/acpi/wakeup"
5) What does not works well out of box:
- Both GNOME and KDE's fonts are too small to be readable for out of box experience. Additional configuration is a need. (Some of the info can be found on "More Tips" later)
- Thunderbolt hotplugging is NOT supported under Windows and Linux so far. Neither FaceTime HD camera works as well.
- The red light in Headphone jack is always on. I do not have luck in switching off the light without losing the sound.
Note 1: It is determined that the module "snd_hda_intel" is used by both cards (HDMI and normal output)
Note 2: It is also known that blacklisting it can switch off the redlight at the price of muting the system.
Note: Based on this article, http://support.apple.com/kb/TS1574
A Mac (Except Mac Pro) needs servicing when there is a red light while the system fails to detect internal speakers. However, this article does NOT applies to this issue.
5A) More Tips:
Install gnome-tweak-tool for more customization
Search for: "gnome-package" to install:
Install Gnome Package Installer for advanced package repository
Install Gnome Package Updater for advanced updates to be install (Whereby Fedora's App Store alike might not show the relevant updates)
14. Verify if disk is still GPT:
Use Gdisk to determine if the disk is pure GPT:
http://ubuntuforums.org/showthread.php?t=1742682
Command: sudo gdisk -l /dev/sda (The entire hard drive)
You should see the MBR is "Protective" instead of anything else.
15. Congrats, the system is ready for triple boot. (I forgot to eject my Windows DVD when the photo was taken)
Note 1: You cannot set the default startup disk in Linux due to the lack of Boot Camp Control Panel in Linux.
Neither is changing startup disk recommended in Windows due to the inability to display correctly.
For me, I click "Cancel" whenever I am on this tab (Feel free to make other Boot Camp adjustments in other tabs).
Only OSX I know that can show the startup disk options correctly.
Note 2: For some reason, OSX likes to auto mount the EFI partition everytime it boots up. It is not known to have any issue for ejecting other disks or mounting disks via Disk Utility.
Note 3: It is not determined if any Firmware or System upgrades will cause issues. It is only known that all 3 OS's regular updates should not be an issue.
System Updates excludes Mac OSX 10.9.3 updates to OSX 10.9.4 type as I had done it on a OSX 10.9.4 Mac or Windows 8.1 to Windows 8.1 Update 1 since my Windows DVD comes with Update 1.
System Upgrades refers to OSX Mavericks to Yosemite, Fedora 20 to Fedora 21, Windows 8.1 Update 1 to Windows 8.2 / Windows 9 for that matter.
Note 4: Reset SMC and / or PRAM will NOT affect your ability to boot any of the OS (OSX, Recovery HD, Fedora & Windows 8)
Yup, that is it!

[SOLVED]Arch Linux, and Windows 8.1 Dual Boot issue

Hi guys. I recently bought a new laptop, and decided to run Arch Linux and Windows 8.1. I installed Windows 8.1 first as recommended by the beginners guide, and then installed Arch Linux. I made sure UEFI was enabled in my BIOS, and made sure everything was on a GPT partition. The install itself went fine. My laptop loads grub, and Arch Linux shows up and boots, but there is no option to boot into Windows 8.1. The only way I can boot into Windows 8.1 is by accessing my motherboard, and choosing to launch the windows boot manager instead of the grub launcher. How can I get Windows 8.1 to show up in grub? Thanks in advance guys.
Last edited by Painguy (2014-08-20 20:19:37)

Painguy wrote:
-----------Edit------------------
Yeah just ran this after installing os prober
grub-mkconfig -o /boot/grub/grub.cfg
and it works now. Sorry for the crazy posts guys. Thanks for the suggestions and help.
Yeah I'm sure I'm doing something wrong lol. I did not install OS-Prober. I think that's where the issue is. I'm missing the menu entry in grub.cfg right? Do I just run os prober or do I have to manually edit grub.cfg.
If that's not the case then here is what I did up until now. What I did was start with a blank SSD drive. I used cgdisk to make the disk use a GPT partitioning scheme. I installed windows 8.1 and checked in windows to make sure it boots into UEFI-GPT mode and it does. I then installed arch linux using the beginners guide. I made sure to use cgdisk to create any extra partitions, and installed GRUB to the efi partition that windows had created ( I did not format this partition ). I then finished the installation and rebooted, and Grub only shows arch linux. I don't think I'm dealing with anything MBR related. I made sure I used the GPT partitioning scheme....i think lol.
All you need to do is run os-prober then run grub-mkconfig. It should pick up Windows at that point.

How to set owner-only access file permissions both on Linux and Windows

Hi everybody.
I have the following problem. I need to store some private user information in file system. So I need to set owner-only access permissions for some directory in user home. I did not find API for doing this. As I understand this is platform specific thing. Could anybody tell me how can I do this both on Linux and Windows?
Thank you in advance.

More ideas just came back to me (of something I did before)
Each OS requires a different control.
For Windows you will need to set the .policy file for each user (a pain if you have more than a dozen of clients) granting access (R or RW) to files/directories.
Then you have to write some native code (access via JNI) to access/modify your authorization.
A more professional solution that I used was J-Integra (other similar tool exist).
Basically it is a bridge between Java and COM. It magically give you access to the COM API from Java (and vice versa).
In my case it was to read/write/modify Winword documents transfered between PC and server.
From memory you have to run the com2java.exe to build the bridge (classes in Java language) between the 2 families. Compile those classes and you have a "driver" for the COM (Microsoft Objects).
Here I must confess my ignorance on Microsoft.
Those COM objets must give you some easy/integrated access to the API for LDAP or Microsoft Active Directory Service (for centralize control with more complex setup).

Oracle10G and oracle11gr1 for windows and Linux

Hi
Can you help me in getting these Softwares
Oracle10G and oracle11gr1 for windows and Linux ,I am unable to get them .
Thanks in advance
Sanjeev Sen

Oracle10G NOT SUPPORTED ANYMORE,NO SOFTWARE AVAILABLE TO DOWNLOAD TOO
oracle11gr1 for windows and Linux > http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html

Oracle DB sessions on Linux and Windows

Actually I am confused the way session memory is allocated on 32 bit windows and linux OS.
Windows is a thread based architecture where all user sessions are treated as threads of oracle.exe process. The addressable space is 4GB and oracle.exe can use up to 3GB in case you use /3GB switch in boot.ini file. It means that combined size of SGA ,PGA and other memory structures can not be more than 3GB. When a session gets connected with a database a PGA is allocated. It means that memory required by database sessions also comes from the 3GB limit. If your memory usage goes beyond 3GB you wont be able to connect new sessions with database or you would require to reduce the size of one of your SGA components.
Linux is a process based architecture where each user session is treated as a separate process and has its own addressable space. Even on 32bit linux the addressable space is 4GB i.e. 2GB for process and 2GB for kernel. It means we need to accommodate our SGA and PGA in the 2GB limit (there are ways to increase the size of SGA but let assume we are doing nothing to raise the 2GB limit).
As PGA is allocated for every session when it connects with database.
My question is how PGA memory is allocated against a database session on linux.
To further clarify my question I am stating the results of an experiment that I did on linux and windows.
On windows I set the total size of SGA to 1730M and PGA aggregate target to 1024M. I was able to able to startup the database instance without any issue. Then I started connecting sessions with the database and even ran a query doing a heavy sort in one of the sessions but after connecting 10 sessions with DB I started getting ORA-12500 TNS Listener failed to start a dedicated server process error on windows.
Then I did the same experiment on Red Hat Linux. SGA size was 1633MB and where as PGA aggregate target was only 10MB. I was unable to start instance when I set the SGA size more than 1633MB.
With that setting I was able to connect more than 200 sessions with database inspite of running query doing heavy sort in 4 sessions without getting ORA-12500 error. I was even able to connect more than 400 sessions with database after setting PGA aggregate target to 1GB on Linux.
Now my confusion is why linux was able to handle more DB sessions. I know it’s a process base model and each session is a separate process and has its own addressable space but as PGA is allocated against every session and PGA memory comes from 2GB limit then why PGA memory did not exhaust on linux. Is PGA allocated differently on linux as compared to windows?

Perhaps the problem is easier to understand if you leave PGA_AGGREGATE_TARGET out of this issue completely.
The out of memory problem you had, has nothing to do with PGA_AGGREGATE_TARGET setting directly. The difference in number of processes comes from architectural differences in how Oracle uses memory in windows vs unix.
On windows the SGA + ALL PGAs must fit into one 4GB address space (in practice even smaller as youve noticed). This is because there's only one process, oracle.exe. One process = one address space.
On Unix, you have many processes and every process can use portion of their own address space for PGA.
So, on windows (32bit) you run out of address space for the single oracle.exe process. On unix you dont hit this limit just because the number of processes grows (but if some process wants to use a lot of PGA memory, then they eventually run out of address space (talking about 32bit again))
On unix you probably ran into another limit - amount of total usable virtual memory (RAM+swap) available in your system
Tanel Poder
http://blog.tanelpoder.com

Different soap request in 9.2.0.4 linux and windows for same webservice

hi,
i deployed a webservice on iis5 (dotnet 1.1). the client for this web service is written in java and is loaded into oracle db (9.2.0.4 linux). and there are errors. the same java code is working fine on 9.2.0.4 windows.
description of the error:
<?xml version="1.0" encoding="UTF-8" ?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<SOAP-ENV:Body>
<ns1:MethodName xmlns:ns1=http://tempuri.org/Service/message/ SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
<SomeString xsi:type="xsd:string" xsi:nil="true" />
<ErrorDes xsi:type="xsd:string" xsi:nil="true" />
</ns1:MethodName>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
there are problems with the 'SomeString' and 'ErrorDes' elements. there is an attribute xsi:nil="true". in the working requests this isn't present. the result of this, if for example DName isn't assigned a value this element isn't in the resulting response:
<?xml version="1.0" encoding="utf-8" ?>
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:tns=http://tempuri.org/ xmlns:types="http://tempuri.org/encodedTypes" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<soap:Body soap:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
<q1:MethodNameResponse xmlns:q1=http://tempuri.org/Service/message/>
<Result xsi:type="xsd:int">0</Result>
<ErrorDes xsi:type="xsd:string">string</ErrorDes>
</q1:MethodNameResponse>
</soap:Body>
</soap:Envelope>
what can cause this behaviour? is there a way to prevent sending the xsi:nil attribute?
thanks
ralf

This is just one of the web service interop problems you can face. Both omitting the accessor with the NULL value as in your "working request" and placing xsi:nil attribute with the value "true" as in "not working request" are valid in soap messages. The problem happens when either the soap client or soap server/container does not fully support the soap spec or support with wrong interpretations. Most of the toolkit are not sophisticated enough to let you choose one of two options above.
Maybe you might want to consider not allowing non-null values so that you can get around with the interop problem, and add logic in the client and service implementation to handle special cases for default values indicating null.
Below is FYI.
SOAP 1.1 spec says the following.
"A NULL value or a default value MAY be represented by omission of the accessor element. A NULL value MAY also be indicated by an accessor element containing the attribute xsi:null with value '1' or possibly other application-dependent attributes and values."
On the other hand, there is no "null" attribute in http://www.w3.org/2001/XMLSchema-instance namespace referenced by xsi in your soap messages, and xsi:nil is the valid attribute name.
Regards,
Pyounguk

Linux and Weblogic .

Hi ,
Does anybody has an experience running Linux and Weblogic 5.1/6.0
as
application server in the production ?
What are performance benefits/drawbacks comparing to NT & Weblogic?
Thank you in advance,
Vlad

I had problems installing Weblogic 6 on Redhat 9, but was able to get 7 and 8 to install without any issues.
Nick
On 7 May 2003 06:35:45 -0700, [email protected] (william milbratz) wrote:
Hi,
I loaded up Redhat 8.0 on a development workstation . I started to
download Weblogic 7 but noticed that it only supported for version 7.2
of redhat (not even 7.3).
Will Weblogic 7 run on RH 8.0? What about WL 8? Or Redhat 9? Or other
distros...
I've found some compatibility matrixes, but they seem out of date.
A google search didn't yield much.
thanks,
billm

What privileges user should have to install and run weblogic on linux box

What privileges user should have to install and run weblogic on linux box ?

Hello.
Normal user if you don't want to listen to ip port < 1024 or write in protected directories (like /var).
Regards.

Site SSL works on Chrome, Safari, and FF for Linux and OS-X, but not FF for Windows 7 (or any Android browser)

I am setting up a website with SSL: https://coalitionportelgin.ca The SSL connection works (and intermediate certificates are retrieved) in Chrome on Linux, OS-X, and Windows 7; ChromeOS; Firefox (18.0) on OS-X and Linux; and Safari on OS-X, iOS, and Windows.
However, I am still getting connection errors on Firefox 18.0 on Windows 7 and on all Android browsers, with "This Connection is Untrusted...because no issuer chain was provided."
This diagnostic tool shows the certificate chain is being pulled, but still reports "Unable to get the local issuer of the certificate. The issuer of a locally looked up certificate could not be found."
http://www.networking4all.com/en/support/tools/site+check/report/?fqdn=coalitionportelgin.ca&protocol=https
Intermediate certificate is installed:
$ ls /etc/ssl/certs |grep GandiStandardSSLCA.pem
GandiStandardSSLCA.pem
And it is being pointed to:
$ grep -i -r "SSLCertificateChainFile" /etc/apache2/
/etc/apache2/sites-available/000-coalitionportelgin.ca-ssl: SSLCertificateChainFile /etc/ssl/certs/GandiStandardSSLCA.pem
/etc/apache2/sites-enabled/000-coalitionportelgin.ca-ssl: SSLCertificateChainFile /etc/ssl/certs/GandiStandardSSLCA.pem
/etc/apache2/httpd.conf: SSLCertificateChainFile /etc/ssl/certs/GandiStandardSSLCA.pem
For good measure, the intermediate and root certificates have also been appended to the server certificate.
I have followed all steps indicated by the cert provider, as well as other sources, and have spent hours troubleshooting this. I don't see anything more to be done. Is this a problem of server configuration (and if so, what?) or is this a problem that I can't do anything about?

Try to ask advice about web development at the MozillaZine "Web Development/Standards Evangelism" forum.
*http://forums.mozillazine.org/viewforum.php?f=25
The helpers at that forum are more knowledgeable about web development issues.<br>
You need to register at the MozillaZine forum site in order to post at that forum.

Errors with VI after down converting from 2009 to 8.x and porting from Windows to Linux

Hi All,
I'm pretty new to Labview so I've been trying to learn along the way. I've been tasked with porting a .VI that my supervisor developed on Windows to a Linux machine. The ultimate goal would be to build an executable that would be able to run on Linux based VMEs. The .VI was developed on Labview 2009 and the Linux machine has Labview 8.2. From what I understand I would need to downconvert the .VI in 2009 to be compatible with 8.2, then from there I would compile the .VI on 8.2 in Linux and create the executable.
After having downconverted the .VI I tried to run the .VI to see if the program still worked/if any parts were broken. Unfortunately, it seems like after having downconverted and porting to Linux the program is unable to communicate over TCP/IP with the module that the program was designed to work with. My supervisor ran the debugging application where it showed the progress of the data as it travelled along the block diagram and it seems to break at the TCP write blocks.
The error that I've recieved was Error 56 at TCP Read in WriteThenReadRegister.vi->E_LINAC_BPM_REV.1.0.vi
Possible reasons: labview: the network operation exceeded the user-specified or system time limit.
We've tested the connection outside of Labview and the Linux VME can definitely communicate with the module in xterm.
Can anyone point me in the right direction to start trouble shooting this?
When I performed the downconvert operation I recieved a bunch of warnings that stated:
C:\BPM_Labview_Files\My_LabVIEW\New folder\E_LINAC_BPM_Rev.1.0 Folder\E_LINAC_BPM_Rev.1.0.vi (E_LINAC_BPM_Rev.1.0.vi)
The object "Increment" does not support output configuration in the previous version.
The object "Divide" does not support output configuration in the previous version.
The object "Increment" does not support output configuration in the previous version.
The object "Divide" does not support output configuration in the previous version.
The object "Divide" does not support output configuration in the previous version.
The object "Multiply" does not support output configuration in the previous version.
The object "Divide" does not support output configuration in the previous version.
The object "Increment" does not support output configuration in the previous version.
The object "Divide" does not support output configuration in the previous version.
The object "Increment" does not support output configuration in the previous version.
The object "Divide" does not support output configuration in the previous version.
The object "Increment" does not support output configuration in the previous version.
The object "Divide" does not support output configuration in the previous version.
The object "Increment" does not support output configuration in the previous version.
The object "Increment" does not support output configuration in the previous version.
The object "Divide" does not support output configuration in the previous version.
The object "Boolean Array To Number" does not support output configuration in the previous version.
The object "Increment" does not support output configuration in the previous version.
The object "Multiply" does not support output configuration in the previous version.
The object "Boolean Array To Number" does not support output configuration in the previous version.
The object "Boolean Array To Number" does not support output configuration in the previous version.
The object "Increment" does not support output configuration in the previous version.
The object "Increment" does not support output configuration in the previous version.
C:\BPM_Labview_Files\My_LabVIEW\New folder\E_LINAC_BPM_Rev.1.0 Folder\PowerScan.vi (PowerScan.vi)
The object "Multiply" does not support output configuration in the previous version.
The object "Multiply" does not support output configuration in the previous version.
The object "Multiply" does not support output configuration in the previous version.
The object "Multiply" does not support output configuration in the previous version.
The object "Subtract" does not support output configuration in the previous version.
Thanks in advance,
Jason.

I guess I should also post the .VIs in case someone could give some insight as to what's breaking.
Again, I need to downconvert this from 2009 to 8.2 to run on a linux machine.
In the mean time I'll be playing around with the "save as previous version" and the tool kit options.
Thanks again in advance.
Jason.
Attachments:
E_LINAC BPM 2009.zip ‏266 KB

Oracle Linux and Windows Active Directory

I am looking for a good article on joining an Oracle Linux server to a Windows Active directory domain.
We are primarily a Windows shop but need to bring up a couple of Oracle Linux servers (VM Server and VM Manager). I would like to use the existing Windows domain controller for user authentication.

I don't have experience in joining a Linux system with Windows AD, and it generally does not sound like the best idea to me, but since Oracle Enterprise Linux is a clone of Red Hat Enterprise Linux, the solution you are looking for could be called Winbind.
Perhaps the following links are useful:
http://spiralbound.net/blog/2007/04/11/rhel-winbind-authentication-against-active-directory
http://www.linuxmail.info/active-directory-integration-samba-centos-5/
http://magazine.redhat.com/2007/11/12/tips-and-tricks-how-can-i-configure-winbind-to-synchronize-user-and-group-ids-across-multiple-red-hat-enterprise-linux-hosts-on-active-directory-accounts/

Weblogic on Linux and LiveCycle on Windows??

Similar Messages

Maybe you are looking for