WebLogic Platform Uninstall Problems

Arghhh...
When I try to uninstall WebLogic Platform the uninstaller errors out saying "No
installation of WebLogic Platform found!, aborting"
I figured the install had problems so I tried reinstalling it to another directory.
The installation went fine. I immediately tried to uninstall it and got the
same error. Has anyone seen this or have a suggestion as to how to uninstall
the software.
it is driving me nuts.
J.D.

I just got the problem. Help needed. Thanks
"J.D. Corbin" <[email protected]> wrote:
>
Arghhh...
When I try to uninstall WebLogic Platform the uninstaller errors out
saying "No
installation of WebLogic Platform found!, aborting"
I figured the install had problems so I tried reinstalling it to another
directory.
The installation went fine. I immediately tried to uninstall it and
got the
same error. Has anyone seen this or have a suggestion as to how to uninstall
the software.
it is driving me nuts.
J.D.

Similar Messages

WebLogic Platform Uninstall Problems With SP3 and SP4

I am experiencing a problem (multiple times) WebLogic Platform's uninstall.
I am installing WebLogic Platform 8.1 SP3 from a CD. My machine's OS is Windows 2000 Professional SP4. I'm 99.9% positive that my environment is a supported configuration. I then upgrade to SP4 (once using SmartUpdate and another using the downloaded EXE from the support site, obviously on different runs).
After installing the original (SP3) from CD, I test the uninstall to see if it works. It does, so I cancelled out of the "splash" screen so nothing runs. I restarted my machine. I then upgrade to SP4. I restart the machine again. (As I mentioned before, I've tried this process twice, once with SmartUpdate and most recently with the SP4 EXE install). Without doing anything else, I test the uninstall again, but now, I'm getting the "splash" screen and a warning dialog with the message "D:\bea\weblogic81\uninstall". All methods of uninstall (Start Menu, Console, Silent, Control Panel > Add/Remove, etc...) fail.
In addition, when attempting to use SmartUpdate to downgrade back to SP3, the same things happens, but, in addition, I get another warning dialog with the message "Fail to launch the installer.".
Please help...
Others have experienced this problem since Jul 23, 2003 5:56 AM (based on the thread link below) and I can't seem to find any additional information on it...
http://forums.bea.com/bea/message.jspa?messageID=600005276&tstart=0
Sincerely,
Anthony Mangione

I just got the problem. Help needed. Thanks
"J.D. Corbin" <[email protected]> wrote:
>
Arghhh...
When I try to uninstall WebLogic Platform the uninstaller errors out
saying "No
installation of WebLogic Platform found!, aborting"
I figured the install had problems so I tried reinstalling it to another
directory.
The installation went fine. I immediately tried to uninstall it and
got the
same error. Has anyone seen this or have a suggestion as to how to uninstall
the software.
it is driving me nuts.
J.D.

Problems Installing WebLogic Platform 7.0.0.1

I am trying to install WebLogic Platform 7.0.0.1 downloaded from de BEA Site on
a Microsoft Windows 2000 Advance Server SP2 and during the process this message
appear.
"the instalation archive informacion could not be obtained from BEA System..."
Thanks you for de Help.

Hello Carlos,
Try using the http download option instead of the .net download. This will ensure
that you have the executable on your machine instead of a constant connection
through the internet.
Delete whatever installation files you currently have and download the server
again
Teju
"Carlos Dapena" <[email protected]> wrote:
>
I am trying to install WebLogic Platform 7.0.0.1 downloaded from de BEA
Site on
a Microsoft Windows 2000 Advance Server SP2 and during the process this
message
appear.
"the instalation archive informacion could not be obtained from BEA System..."
Thanks you for de Help.

Weblogic HTTP handler problems

Recently I had the following problem with an application which
makes ALOT of outgoing HTTP requests - with Weblogic's HTTP handler
it was resulting in sporadic deadlocks, but using Sun's handler
completely cured the problem. (5.1, sp6 on Solaris, not reproduceable
on Windows 2k).
Is that a bug?
Dimitri

I just got the problem. Help needed. Thanks
"J.D. Corbin" <[email protected]> wrote:
>
Arghhh...
When I try to uninstall WebLogic Platform the uninstaller errors out
saying "No
installation of WebLogic Platform found!, aborting"
I figured the install had problems so I tried reinstalling it to another
directory.
The installation went fine. I immediately tried to uninstall it and
got the
same error. Has anyone seen this or have a suggestion as to how to uninstall
the software.
it is driving me nuts.
J.D.

How do I run a weblogic platform portal 8.1 on a weblogic server 7.0 service pack 4?

Hello.
How do I run a weblogic platform portal 8.1 on a weblogic server 7.0 service
pack 4?
Is that a supported configuration? any problems / Issues ?
Weblogic Integrator

Why the hell do you want to do that ? ? ?
just run it on 8.1, if you need to get info from the 7.0 server just get it.
8.1 is a whole new framework, what you suggest a hack that is probably not supported.
nerdi
"Integrator" <[email protected]> wrote:
>
Hello.
How do I run a weblogic platform portal 8.1 on a weblogic server 7.0
service
pack 4?
Is that a supported configuration? any problems / Issues ?
Weblogic Integrator

Workshop IDE for WebLogic Platform - JSF Portlet Development

Hello,
I am trying to develop JSF based portlets using BEA Workshop for WebLogic Platform IDE. The capabilities of the IDE in terms of JSF is like a simple text editor. Since the IDE is eclipse based, I wanted to to use some Third Party Plugin for JSF development.
I evaluated the following:
1. Workshop Studio for JSF
2. MyEclipse PlugIn for JSF
Problem 1:
Workshop Studio for JSF is a separate product and cannot be installed as an plugin over the Workshop IDE.
Is this acheivable?
Problem 2:
I created a Portal application Workspace through Workshop for Platform and opened the same using Workshop Studio for JSF. It crashed saying some runtime exceptions.
Problem 3:
MyEclipse PlugIn for JSF doesnt integrate properly with Workshop IDE. The Faces navigational flow view is not working properly.
Questions:
1. What is BEA's recommendation for JSF development?
2. Can you guide me how other developers are using the IDE for JSF development?
Thanks and regards,
Pazhanikanthan. P

Hi Pazhanikanthan,
Unfortunately, in the current release the JSF features cannot be used to create JSF portlets.
Please check the following URL for additional information on JSF portlet creation
http://e-docs.bea.com/wlp/docs92/portlets/building.html#wp1062147
If you are planning on building JSF web applications, you can always evaluate and purchase a copy of Workshop for JSF or Workshop Studio.
if you are planning on building JSF based pportlets, you will need to sue the tooling provided by Workshop for WebLogic 9.2
Applications built in Workshop for WebLogic cannot be imported into Workshop Studio. On the other hand, you can always create a webapp in Workshop Studio,a nd then import it into Workshop for WebLogic as a component.
hope this helps.
cheers
Raj
If you have additional questions specific to portlet development, please post to the portal newsgroup at http://newsgroups.bea.com/bea/forum.jspa?forumID=2044

Weblogic 10.0 Problems with stripes/struts

When trying to deploy the sample application for the stripes framework on weblogic 10.0 I get the following error when deploying.
<Dec 3, 2009 12:16:51 PM CET> <Error> <HTTP> <BEA-101165>
<Could not load user defined filter in web.xml:
net.sourceforge.stripes.controller.StripesFilter.net.sourceforge.stripes.exception.StripesRuntimeException:
Problem instantiating default configuration objects.I actually had to switch to using the Sun JDK to get this error. JRockit does not report it, and just fails when I try to use the application. The problem appear to be weblogic 10.0 specific. No problems with jetty or tomcat, and I've heard reports that it is resolved in weblogic 10.3. Have ayone come accross similar problems when using stripes/struts on weblogic 10.0, and found a solution to this? Is there a patch available for 10.0 than fix this?
Regards
Morten
PS: I have ommited the complete stack trace, since it is monstrously huge.

Guess I was wrong in thinking that this was an isolated weblogic 10.0 problem. I just downloaded weblogic 10.3 and tried to deploy the same application there, and the same error happened.
<03.des.2009 kl 15.12 CET> <Error> <HTTP> <BEA-101165>
<Could not load user defined filter in web.xml:
net.sourceforge.stripes.controller.StripesFilter.net.sourceforge.stripes.exception.StripesRuntimeException:
Problem instantiating default configuration objects.
        at net.sourceforge.stripes.config.DefaultConfiguration.init(DefaultConfiguration.java:220)
        at net.sourceforge.stripes.config.RuntimeConfiguration.init(RuntimeConfiguration.java:272)
        at net.sourceforge.stripes.controller.StripesFilter.init(StripesFilter.java:125)
        at weblogic.servlet.internal.FilterManager$FilterInitAction.run(FilterManager.java:329)
        at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
        Truncated. see log file for complete stacktrace
java.lang.NullPointerException
        at java.io.FilterInputStream.read(FilterInputStream.java:116)
        at sun.nio.cs.StreamDecoder.readBytes(StreamDecoder.java:264)
        at sun.nio.cs.StreamDecoder.implRead(StreamDecoder.java:306)
        at sun.nio.cs.StreamDecoder.read(StreamDecoder.java:158)
        at java.io.InputStreamReader.read(InputStreamReader.java:167)
        Truncated. see log file for complete stacktraceSo is there anyone out there with experience with struts/stripes, that can tell why this does not work? If you need to try this yourself, you can download the stripes sample application here:
http://sourceforge.net/projects/stripes/files/stripes/Stripes%201.5.2/stripes-1.5.2.zip/download
There is an example WAR called "stripes-examples.war" in the zip that is ready to be deployed.
Regards
Morten
PS: you still need to start weblogic with Sun JDK rather than JRockit to get the error. With JRockit the application simply fails when used.

Virtual directory mapping in weblogic platform 7.0

Hi. I noticed in WebLogic Platform 7.0 there is a entry for
WEB-INF/weblogic.xml that defines a virtual directory. Example:
<!DOCTYPE weblogic-web-app PUBLIC "-//BEA Systems, Inc.//DTD Web
Application 7.0//EN"
"http://www.bea.com/servers/wls700/dtd/weblogic700-web-jar.dtd">
<weblogic-web-app>
<virtual-directory-mapping>
<local-path>C:\webapps\context\x\y</local-path>
<url-pattern>/images/*</url-pattern>
</virtual-directory-mapping>
</weblogic-web-app>
In this case I'm assuming that a request of the form
http:/host:7001/context/images/z.gif would map to the physical file
C:\webapps\context\x\y\z.gif. However I cannot get this to work. Is
my assumption about it's use incorrect? Is the syntax of
<local-path/> or <url-pattern/> wrong? Is there something you have to
do to get WebLogic to recognize the weblogin.xml file?
This is urgent. Please help.
Thanks.
Scott Steimle
Software Engineer
Convera

I see. In my case, x == images, so if I reverse my directory
structure I could still get this to work for me. For instance:
<virtual-directory-mapping>
<local-path>C:\webapps\context\y</local-path>
<url-pattern>/images/*</url-pattern>
</virtual-directory-mapping>
/images/z.gif would map to C:\webapps\context\y\images\z.gif.
I'll have to weigh changing our directory structure vs. keeping the
servlet we have that rewrites the URL.
Thanks for your help.
Scott Steimle.
Rajesh Mirchandani <[email protected]> wrote in message news:<[email protected]>...
From the developer
Virtual directories just replace the doc root. The doc root in your case
is C:\webapps\context\x\y. The request uri is /images/Z.gif. So the whole
thing resolves to C:\webapps\context\x\y\images\Z.gif. Which is where the
image should be located.
We have cleared up the docs. Sorry for any inconvenience.
Scott Steimle wrote:
Hi. I noticed in WebLogic Platform 7.0 there is a entry for
WEB-INF/weblogic.xml that defines a virtual directory. Example:
<!DOCTYPE weblogic-web-app PUBLIC "-//BEA Systems, Inc.//DTD Web
Application 7.0//EN"
"http://www.bea.com/servers/wls700/dtd/weblogic700-web-jar.dtd">
<weblogic-web-app>
<virtual-directory-mapping>
<local-path>C:\webapps\context\x\y</local-path>
<url-pattern>/images/*</url-pattern>
</virtual-directory-mapping>
</weblogic-web-app>
In this case I'm assuming that a request of the form
http:/host:7001/context/images/z.gif would map to the physical file
C:\webapps\context\x\y\z.gif. However I cannot get this to work. Is
my assumption about it's use incorrect? Is the syntax of
<local-path/> or <url-pattern/> wrong? Is there something you have to
do to get WebLogic to recognize the weblogin.xml file?
This is urgent. Please help.
Thanks.
Scott Steimle
Software Engineer
Convera

Java Uninstall Problem

Java Uninstall Problem
This all came about because of a failed uninstall, using Your Uninstaller.
The {Java runtime which is all I want) is not listed now & I tried all the other fix bad uninstall type features, all to no avail.} )
When I DL & run the latest package (jxpiinstall-6u11-fcs-bin-b90-windows-i586-25_nov_2008.exe}
& run it I get:
1st message:
     "This software has already been installed on your computer.
     Would you like to install it?"
If I say no, it exits.
If I say yes, I get this second message:
     :This action is only valid for products that are currently installed."
So Now I have no Java & have no idea what to do.
Any help would be greatly appreciated.
Thanks, Neuromancer23

Sorry...after posting it i realized there was a more appropriate forum, of which it took quiet awhile to find.)
Now that I know where to find the forum list I will never double-post again.
I'll close the question if I can

CS1 Install/Uninstall Problems ?

I can't uninstall CS1, nor can can I reinstall Photoshop from CS1, which is presently not installed. My OS is Windows Vista Home Premium. I am out of warranty and Adobe will not provide suppport. I have read all I can find about FLEXnet licensing suspecting there is a connection. When I try to either install or uninstall CS1, I get an error message from Microsoft saying that "Adobe CS1 installer has stopped working". There is no other information unless I open the Adobe File folder for Photoshop from CS1 that I saved to my desktop. I can initiate the install procedure from that folder, but when prompted for the original product serial number a message states that the serial number I have provided is invalid. I have talked with Adobe however, and their records indicate that I have a valid serial number.
I have gone to "Services" using the administrative tools in the control panel and tried setting FLEXnet Licensing on manual, then on automatic, and finally disabling it temporarily. I have gone to the Start Up menu on the desktop and entered "msconfig" in the search box and gone to services where FLEXnet was at first "stopped" and is now "running".
On some forums there are recommendations to first copy and save FLEXnet to another area of the hard drive, then delete it altogether from its original location, and then uninstall ALL Adobe software in the computer before reinstalling everything. Other contributors strongly caution the removal of FLEXnet, and some users have complained of ongoing problems after deleting FLEXnet. Firstly, I'm not sure I can figure out how to copy and save FLEXnet to another drive, and secondly I'm afraid of the possible results. Even if I can accomplish those tasks I don't know if that procedure will then allow me to either uninstall the portion of CS1 still in my computer, or reinstall the Photoshop that presently won't install. By the way, all the CS1 programs that remain in my computer are operational. Photoshop is the only missing component.
I am not well versed in technology, and much that I read in the forums is only partially comprehensible to me. If you have the patience and knowledge to help me unravel this mess I would love your help. Thanks. Harrison

Thank you Bob. It was very nice of you to write. I have been using CS1 with Vista since Vista came out. I'm aware that compatibility is considered a significant issue. Fortunately, I never had any problems until now, although I would have replaced CS1 with a more recent and compatible version if money were not part of the equation for me.
Adobe told me that if I bought the CS5 they would help me straighten out any issues now caused by the CS1, but otherwise they would not help. I did not think to ask if Adobe has designed CS5 to be compatible with Vista, but I will. I may buy the more recent version out of necessity, but it does not seem unreasonable to me that Adobe should help someone with a valid serial and registration number access their software regardless of warranties. The problem at hand seems to be a glitch in the licensing application provided by FLEXnet that I presume protects Adobe from unauthorized use of their products. I am wondering how much this situation actually has to do with system compatibility, given that I have been using the software for roughly two years with Vista, or whether it is simply that Adobe's FLEXnet licensing shield can work against legitimate users under certain circumstances. Adobe did not mention FLEXnet to me, but I would like to know one way or the other if FLEXnet is at the core of the problem.
Thank you again Bob for writing. I may wipe my OS clean and reload everything. I suspect the CS1 might work then, but I do realize that CS1 is old by technological standards, in spite of the fact that I would gladly continue to use it. I am among those people that find the cost of keeping current very difficult, and I find it exasperating that so many products and services become obsolete very rapidly when considering their relative cost. Have a nice weekend.
Best Regards,
Harrison
Original Message -
From: BobLevine <[email protected]>
To: Alec Howard <[email protected]>
Sent: Sat, Jun 12, 2010 4:09 pm
Subject: CS1 Install/Uninstall Problems ?
The original CS is completely unsupported under Vista or Win 7 and now that CS5
s out, you're out of the upgrade loop. I wish I had something positive to tell
ou but I don't.
ob

Donloaded WebLogic Platform 7.0: WebLogic: license has expired!

Hi all,
I have downloaded WebLogic Platform 7.0 from
http://commerce.bea.com/downloads/weblogic_platform.jsp page last week
and installed it after a number of unsuccessful tries due to
unsufficient resources on my PC. When it was finally installed I tried
to run the server, using the workshop, petstore and examples -> start
server, but
all of them give me this error:
$$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$
Unable to start WebLogic Server!!
WebLogic: license has expired!
$$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$
The WebLogic Platform 7.0 was downloaded on Wed, 23 Oct 2002. Installed this weekend.
I appreciate any help on this. Thank you.
Best regards,
Maya mailto:[email protected]

Test

Weblogic platform 8.1.4

Where can I find installation for weblogic platform 8.1.4?

All the easy to get WebLogic server version are listed here: http://www.oracle.com/technetwork/middleware/ias/downloads/wls-main-097127.html
When you need other versions, you have to contact support and see if you can get it through those channels.

Premier Elements 10 install/uninstall problems (including upgrades)

Unfortunately, Premier elements 10.0 has several installer bugs as it relates to machines wiht previous versions of Premier Elements installed.
1. It doesn't upgrade the old version of Premier Elements. Doesn't notice. Doesn't tell you. Doesn't warn up of the upcoming problems.
2. If you later choose to uninstall the older version of PE, then that PE corrupts the install of PE 10. Just for starters, the premier element (prel) files are no longer associated with Premier Elements.
3. If you then choose to re-install or do a "repair" install of PE 10...you can't. Adobe doesn't have that. 5 years after its possible. Do you have to completely uninstall PE 10 and then reinstall it.
I am having a horrible first day experience with Premier elements 10.

Helo Install_Guru. I believe you misread my post. I never said in my post that you couldn't launch PE10. Instead here are the repro steps and behaviors:
setup:
Lenovo T61 laptop w/ T7700 core 2 duo, 8gb ram, 300gb hd
Windows 7 Ultimate x64 sp1 with all current windows updates
Microsoft Security Essentials
Premier Elements 8.0 (with the incremental PE8 update installated)
repro
purchase PE10 upgrade from the Adobe online store and download the two files (exe and 7z) using the alternate method
Run the exe. After it decompresses, check to allow it to launch the installer
Proceed to have PE10 installed in US-English. Provide the serial number when prompted.
Reboot if needed
Verify that PE10 runs. It did successfully for me.
Using control panel, uninstall PE8. Choose for it to uninstalled dependent software
Reboot if needed
Try to open a premier elements project file
result:
Fail. Windows has no association for the file and prompts you to search the internet
expected:
PE10 to open the project
Continued repro:
9. Go to windows control panel to repair the install
10. Select PE10. Click uninstall/change
Result:
Prompts me to uninstall PE10.
expected:
Have a selection to repair or uninstall the install. Repairs are a technology available for many years now. Also helps customers when they don't have the install media nearby.
Continued repro:
11. Run the setup via the 2 files downloaded from the Adobe store.
12. Select to launch the setup
Result
Prompts me to uninstall PE10
Expected:
Have a selection to repair or uninstall. Sometimes vendors can have more options using the install media, yet there is still only the uninstall option.
Continued repro:
13. Choose to uninstall PE10. Note, that the deregister text in the uninstall is vague as it applies to this repro case of re-installing
14. reboot if needed
15. Using original two files from adobe store, start the setup
16. Run the setup via the 2 files downloaded from the Adobe store.
17. Select to launch the setup
18. Proceed to have PE10 installed in US-English. Provide the serial number when prompted.
19. Reboot if needed
20. Verify that PE10 runs. It did successfully for me.
Notes:
The customer (me) was never prompted to read the README file. In fact, it is rather hard to know one even exists. You have to manually open the folder created on your desktop (by the 2 file decomp process) and within it open the readme folder and with it find the filename that you can understand. In short, a user will never read the README file because they are not prompted during the setup. Instead, the Adobe Store 2 file setup process guides me with the steps to not read me by the default of Launch Setup, hiding it two folders down on the desktop, etc.
The README file has a section on Compatibility with other versions of PE. Hurrah! However, the content in that section is poor. Sad.
The README file says, "You can have previous versions of Adobe Premiere Elements installed on your computer, but do not run them simultaneously." When I read this, it implies that if I somehow installed PE10 on my computer while a previous one was installed, then I can never ("do not run them simltaneously") use that previous again or something bad happens. If this is true, then don't allow PE10 to install while a previousl version is installed. Halt the PE installer giving that reason. However, if that README note means that I can run PE10 and PE8 (for example) on the same computer but I just can't have both processes open and running at the same time, then the README file needs to be more explicit in the warning. As it is not, it is too vague. Be explicit and generous with your wording.
The README file has no warnings of what happens when PE8 (for example) is uninstalled after PE10 was installed. If this is not a tested or supported scenario, then write that in your README file. If it is tested and supported, then you have the bug I documented above in the repro.
In step 3 of the repro above, I strongly suggest you detect any previous install of PE and warn the user. Allow the user to see the README file *right then* so they can make an informed choice. Tell the user that there are uninstall problems and that they will need to fix it up or do the 30+ minute uninstall/install procedure I had to do.
I hope that this can provide you some insight.
--Dale

Weblogic Platform 8.1 SP1

Hi!
I have just received the Weblogic Platform SP1 CD from BEA and I see on
the website that there SP2 is out already. The question is, SP2 is
available as a separate download or only with the whole Platform?
Thanks!
Regards,
Stelian Iancu
stelu AT siancu DOT net
"They say we are thinking in bits ..."

Yes Michael, The latest WebLogic Platform 8.1 GA does contain WLS 8.1 sp1.
The server log does contain this information too.
WebLogic Server 8.1 SP1 Fri Jun 20 23:06:40 PDT 2003 271009
WebLogic XMLX Module 8.1 SP1 Fri Jun 20 23:06:40 PDT 2003 271009
Thanks
Raj Alagumalai
WebLogic Workshop Support
"Michael" <[email protected]> wrote in message
news:3f3adb7c$[email protected]..
subj (about SP1)
Thank you,
Michael

Errors encountered when trying to use a Custom Realm on BEA Weblogic Platform Domain .....

Hi,
We have created a WebLogic Platform Domain. A WebLogic Portal application(Portal
7.0) and some Web Service apps are running on this domain.
We have created a Custom Security Realm b'cos of our application requirements
and now when I startup the Platform Domain, I see lot of errors.
Some of the errors typically are
"<Jan 16, 2003 4:07:02 PM EST> <Error> <HTTP> <101256> <The run-as user: wlisystem,
for the servlet: ApplicationView for the webapp: /WLI_AI_Workshop_Control_Web,
could not be resolved to a valid user in the system. Please check if the user
exists.
javax.security.auth.login.LoginException: Authentication Failed: User wlisystem
denied in Realm Adapter realm weblogic"
or
Unable to deploy EJB: wlai-eventprocessor-ejb.jar from wlai-eventprocessor-ejb.jar:weblogic.ejb20.WLDeploymentException:
weblogic.ejb20.interfaces.PrincipalNotFoundException: Authentication Failed: User
wlisystem denied in Realm Adapter realm weblogic
Do we have to create any predefined user accounts in the Security Store to get
rid of these errors. I would appreciate if anyone can suggest some tips or workarounds
for configuring or creating a Custom Security Realm for Web Logic Platform Domain.
Thanks
Vikram

with 7.0 try to create system in your custom realm.. that may help.
-kiran
"Vikram" <[email protected]> wrote in message
news:[email protected]...
>
Kiran,
First time around, the Custom realm was not authenticating the user. I gotthe
code to authenticate the user successfully. Now the WebLogic serverwouldn't even
start. It would give me an error message which says "User System is notauthorized
to boot Weblogic Server". For your reference, I am attaching the Log file.My
custom realm classes output some debugging statements in the log file.From the
log file u will see that the users are getting authenticated successfully.
Please let me know if you have a custom realm working for you. I might bemissing
something.
Appreciate your help.
Thanks
Vikram
"kirann" <[email protected]> wrote:
does your realm able to authenticate user "wlisystem".
thanks
kiran
"Vikram Datla" <[email protected]> wrote in message
news:[email protected]...
Hi,
We have created a WebLogic Platform Domain. A WebLogic Portalapplication(Portal
7.0) and some Web Service apps are running on this domain.
We have created a Custom Security Realm b'cos of our applicationrequirements
and now when I startup the Platform Domain, I see lot of errors.
Some of the errors typically are
"<Jan 16, 2003 4:07:02 PM EST> <Error> <HTTP> <101256> <The run-asuser:
wlisystem,
for the servlet: ApplicationView for the webapp:/WLI_AI_Workshop_Control_Web,
could not be resolved to a valid user in the system. Please check ifthe
user
exists.
javax.security.auth.login.LoginException: Authentication Failed: Userwlisystem
denied in Realm Adapter realm weblogic"
or
Unable to deploy EJB: wlai-eventprocessor-ejb.jar fromwlai-eventprocessor-ejb.jar:weblogic.ejb20.WLDeploymentException:
weblogic.ejb20.interfaces.PrincipalNotFoundException: AuthenticationFailed: User
wlisystem denied in Realm Adapter realm weblogic
Do we have to create any predefined user accounts in the Security Storeto
get
rid of these errors. I would appreciate if anyone can suggest sometips or
workarounds
for configuring or creating a Custom Security Realm for Web Logic
Platform
Domain.
Thanks
Vikram

WebLogic Platform Uninstall Problems

Similar Messages

Maybe you are looking for