Weblogic Portal 10.2 Doesn't support middleware_home(WEBLOGIC SERVER) 10.3

I have installed weblogic server having version 10.3. Then I have installed weblogic portal 10.2 and tried to extend the middle ware_home of weblogic server having version 10.3.
It gives me error()Middleware_home is in higher version. Please down grade th middle ware home version.
Since weblogic portal 10.3 is not avilabe for download which one I should use.
What are work arounds by which I can instal weblogic portal 10.2 successfully using middle ware_home of weblogic server having version 10.3.
Regards,
Deepak

Hi Ravi,
When I tried to install Weblogic portal 10.3 separatly it is installed successfully. But when tried to run weblogic server I am getting some error and the server is autometicaly shutdown.
Here is the error.
<The realm "myrealm" failed to be loaded: weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException: weblogic.security.spi.ProviderInitializationException: A failure occurred attempting to load LDIF for provider CredentialMapper from file C:\Oracle\Middleware\user_projects\domains\myportaldomain\security\PKICredentialMapperInit.ldift..
weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException: weblogic.security.spi.ProviderInitializationException: A failure occurred attempting to load LDIF for provider CredentialMapper from file C:\Oracle\Middleware\user_projects\domains\myportaldomain\security\PKICredentialMapperInit.ldift.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:465)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:840)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealms(CommonSecurityServiceManagerDelegateImpl.java:869)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1028)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: com.bea.common.engine.ServiceInitializationException: weblogic.security.spi.ProviderInitializationException: A failure occurred attempting to load LDIF for provider CredentialMapper from file C:\Oracle\Middleware\user_projects\domains\myportaldomain\security\PKICredentialMapperInit.ldift.
at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:365)
at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:315)
at com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEngineImpl.java:257)
at com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.java:72)
at weblogic.security.service.CSSWLSDelegateImpl.getService(CSSWLSDelegateImpl.java:156)
at com.bea.security.css.CSS.getService(CSS.java:122)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:457)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:840)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealms(CommonSecurityServiceManagerDelegateImpl.java:869)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1028)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: weblogic.security.spi.ProviderInitializationException: A failure occurred attempting to load LDIF for provider CredentialMapper from file C:\Oracle\Middleware\user_projects\domains\myportaldomain\security\PKICredentialMapperInit.ldift.
at com.bea.common.store.bootstrap.BootStrapServiceImpl.loadFullLDIFTemplate(BootStrapServiceImpl.java:900)
at com.bea.common.store.bootstrap.BootStrapServiceImpl.loadLDIFTemplate(BootStrapServiceImpl.java:678)
at com.bea.common.store.bootstrap.BootStrapServiceImpl.loadLDIFPKICredentialMapperTemplate(BootStrapServiceImpl.java:208)
at com.bea.common.security.internal.service.BootStrapServiceImpl.loadLDIFPKICredentialMapperTemplate(BootStrapServiceImpl.java:134)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:57)
at $Proxy7.loadLDIFPKICredentialMapperTemplate(Unknown Source)
at weblogic.security.providers.credentials.PKICredentialMapperProviderImpl.initialize(PKICredentialMapperProviderImpl.java:173)
at com.bea.common.security.internal.legacy.service.SecurityProviderImpl.init(SecurityProviderImpl.java:65)
at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:363)
at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:315)
at com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEngineImpl.java:257)
at com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.java:72)
at weblogic.security.service.CSSWLSDelegateImpl.getService(CSSWLSDelegateImpl.java:156)
at com.bea.security.css.CSS.getService(CSS.java:122)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:457)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:840)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealms(CommonSecurityServiceManagerDelegateImpl.java:869)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1028)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: <openjpa-1.1.1-SNAPSHOT-r422266:807362 fatal store error> kodo.jdo.FatalDataStoreException: The transaction has been rolled back. See the nested exceptions for details on the errors that occurred.
at org.apache.openjpa.kernel.BrokerImpl.newFlushException(BrokerImpl.java:2170)
at org.apache.openjpa.kernel.BrokerImpl.flush(BrokerImpl.java:2017)
at org.apache.openjpa.kernel.BrokerImpl.flushSafe(BrokerImpl.java:1915)
at org.apache.openjpa.kernel.BrokerImpl.beforeCompletion(BrokerImpl.java:1833)
at org.apache.openjpa.kernel.LocalManagedRuntime.commit(LocalManagedRuntime.java:81)
at org.apache.openjpa.kernel.BrokerImpl.commit(BrokerImpl.java:1357)
at kodo.kernel.KodoBroker.commit(KodoBroker.java:103)
at org.apache.openjpa.kernel.DelegatingBroker.commit(DelegatingBroker.java:877)
at kodo.jdo.PersistenceManagerImpl.commit(PersistenceManagerImpl.java:409)
at com.bea.common.store.bootstrap.DefaultBootStrapPersistenceImpl.makePersistentAll(DefaultBootStrapPersistenceImpl.java:50)
at com.bea.common.store.bootstrap.BootStrapServiceImpl.importLDIF(BootStrapServiceImpl.java:1345)
at com.bea.common.store.bootstrap.BootStrapServiceImpl.loadFullLDIFTemplate(BootStrapServiceImpl.java:893)
at com.bea.common.store.bootstrap.BootStrapServiceImpl.loadLDIFTemplate(BootStrapServiceImpl.java:678)
at com.bea.common.store.bootstrap.BootStrapServiceImpl.loadLDIFPKICredentialMapperTemplate(BootStrapServiceImpl.java:208)
at com.bea.common.security.internal.service.BootStrapServiceImpl.loadLDIFPKICredentialMapperTemplate(BootStrapServiceImpl.java:134)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:57)
at $Proxy7.loadLDIFPKICredentialMapperTemplate(Unknown Source)
at weblogic.security.providers.credentials.PKICredentialMapperProviderImpl.initialize(PKICredentialMapperProviderImpl.java:173)
at com.bea.common.security.internal.legacy.service.SecurityProviderImpl.init(SecurityProviderImpl.java:65)
at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:363)
at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:315)
at com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEngineImpl.java:257)
at com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.java:72)
at weblogic.security.service.CSSWLSDelegateImpl.getService(CSSWLSDelegateImpl.java:156)
at com.bea.security.css.CSS.getService(CSS.java:122)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:457)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:840)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealms(CommonSecurityServiceManagerDelegateImpl.java:869)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1028)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.Subs

Similar Messages

  • Weblogic Pool Driver doesn't support XA driver

              I am trying to set up a JDBC Strore for a JMS Server. The JDBC Store uses the Oracle
              XA driver (oracle.jdbc.xa.client.OracleXADataSource). However whaen the JMS server
              starts it gives me the following exception: Weblogic Pool Driver doesn't support
              XA driver. Any idea what I am doing wrong? I am using WL 8.1 SP2. THe full error
              trace is shown below:
              <Jan 15, 2004 3:05:09 PM EST> <Alert> <JMS> <BEA-040052> <JMSServer "jmsTestJmsServer1"
              store failed to open java.io.IOException: JMS JDBC store, connection pool = <jmsTestJdbcConnectionPool>,
              prefix = <JMS1>: cannot determine DBMS type
              <java.sql.SQLException: Pool connect failed : java.lang.Exception: Weblogic Pool
              Driver doesn't support XA driver, Please change your config to use a Non-XA driver
              <     at weblogic.jdbc.common.internal.JDBCUtil.wrapAndThrowResourceException(JDBCUtil.java:160)
              <     at weblogic.jdbc.pool.Driver.connect(Driver.java:156)
              <     at weblogic.jms.store.JDBCIOStream.checkDbmsType(JDBCIOStream.java:1490)
              <     at weblogic.jms.store.JDBCIOStream.open(JDBCIOStream.java:420)
              <     at weblogic.jms.store.JMSStore.open(JMSStore.java:224)
              <     at weblogic.jms.backend.BEStore.open(BEStore.java:262)
              <     at weblogic.jms.backend.BEStore.start(BEStore.java:151)
              <     at weblogic.jms.backend.BackEnd.openStores(BackEnd.java:1171)
              <     at weblogic.jms.backend.BackEnd.resume(BackEnd.java:1290)
              <     at weblogic.jms.JMSService.addJMSServer(JMSService.java:2241)
              <     at weblogic.jms.JMSService.addDeployment(JMSService.java:2012)
              <     at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:330)
              <     at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(DeploymentTarget.java:590)
              <     at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeployments(DeploymentTarget.java:568)
              <     at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(DeploymentTarget.java:240)
              <     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
              <     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
              <     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
              <     at java.lang.reflect.Method.invoke(Method.java:324)
              <     at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:711)
              <     at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:690)
              <     at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:476)
              <     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
              <     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
              <     at weblogic.management.internal.RemoteMBeanServerImpl.private_invoke(RemoteMBeanServerImpl.java:947)
              <     at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerImpl.java:908)
              <     at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:946)
              <     at weblogic.management.internal.MBeanProxy.invokeForCachingStub(MBeanProxy.java:481)
              <     at weblogic.management.configuration.ServerMBean_Stub.updateDeployments(ServerMBean_Stub.java:7271)
              <     at weblogic.management.deploy.slave.SlaveDeployer.updateServerDeployments(SlaveDeployer.java:1210)
              <     at weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.java:362)
              <     at weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resume(DeploymentManagerServerLifeCycleImpl.java:229)
              <     at weblogic.t3.srvr.SubsystemManager.resume(SubsystemManager.java:131)
              <     at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:964)
              <     at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:359)
              <     at weblogic.Server.main(Server.java:32)
              

              It appears that WebLogic 8.1 does not have the "user transactions enabled" flag
              for a connection factory. I see references to this flag in earlier versions of
              WebLogic. The closest thing in WL 8.1 seems to be the "XA Connection Factory Enabled"
              flag.
              Tom Barnes <[email protected]> wrote:
              >Actually, all you normally need to check is "user transactions enabled".
              >The XA versions of the javax.jms interfaces (which are generated
              >via XA connection factories) are not required - except
              >that I think that MDBs make a check for this.
              >
              >Naresh Bhatia wrote:
              >> So I assume that the XA capability is enabled by checking the "XA Connection
              >Factory
              >> Enabled" checkbox for the JMS connection factory.
              >>
              >> Thanks.
              >> Naresh
              >>
              >> Tom Barnes <[email protected]> wrote:
              >>
              >>>Just use a non-XA driver and non-XA pool for JMS JDBC stores.
              >>>WL JMS' XA capability does not come from its JDBC driver.
              >>>
              >>>Naresh Bhatia wrote:
              >>>
              >>>
              >>>>I am trying to set up a JDBC Strore for a JMS Server. The JDBC Store
              >>>
              >>>uses the Oracle
              >>>
              >>>>XA driver (oracle.jdbc.xa.client.OracleXADataSource). However whaen
              >>>
              >>>the JMS server
              >>>
              >>>>starts it gives me the following exception: Weblogic Pool Driver doesn't
              >>>
              >>>support
              >>>
              >>>>XA driver. Any idea what I am doing wrong? I am using WL 8.1 SP2.
              >THe
              >>>
              >>>full error
              >>>
              >>>>trace is shown below:
              >>>>
              >>>><Jan 15, 2004 3:05:09 PM EST> <Alert> <JMS> <BEA-040052> <JMSServer
              >>>
              >>>"jmsTestJmsServer1"
              >>>
              >>>>store failed to open java.io.IOException: JMS JDBC store, connection
              >>>
              >>>pool = <jmsTestJdbcConnectionPool>,
              >>>
              >>>>prefix = <JMS1>: cannot determine DBMS type
              >>>><java.sql.SQLException: Pool connect failed : java.lang.Exception:
              >>>
              >>>Weblogic Pool
              >>>
              >>>>Driver doesn't support XA driver, Please change your config to use
              >>>
              >>>a Non-XA driver
              >>>
              >>>><     at weblogic.jdbc.common.internal.JDBCUtil.wrapAndThrowResourceException(JDBCUtil.java:160)
              >>>><     at weblogic.jdbc.pool.Driver.connect(Driver.java:156)
              >>>><     at weblogic.jms.store.JDBCIOStream.checkDbmsType(JDBCIOStream.java:1490)
              >>>><     at weblogic.jms.store.JDBCIOStream.open(JDBCIOStream.java:420)
              >>>><     at weblogic.jms.store.JMSStore.open(JMSStore.java:224)
              >>>><     at weblogic.jms.backend.BEStore.open(BEStore.java:262)
              >>>><     at weblogic.jms.backend.BEStore.start(BEStore.java:151)
              >>>><     at weblogic.jms.backend.BackEnd.openStores(BackEnd.java:1171)
              >>>><     at weblogic.jms.backend.BackEnd.resume(BackEnd.java:1290)
              >>>><     at weblogic.jms.JMSService.addJMSServer(JMSService.java:2241)
              >>>><     at weblogic.jms.JMSService.addDeployment(JMSService.java:2012)
              >>>><     at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:330)
              >>>><     at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(DeploymentTarget.java:590)
              >>>><     at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeployments(DeploymentTarget.java:568)
              >>>><     at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(DeploymentTarget.java:240)
              >>>><     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
              >>>><     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
              >>>><     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
              >>>><     at java.lang.reflect.Method.invoke(Method.java:324)
              >>>><     at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:711)
              >>>><     at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:690)
              >>>><     at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:476)
              >>>><     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
              >>>><     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
              >>>><     at weblogic.management.internal.RemoteMBeanServerImpl.private_invoke(RemoteMBeanServerImpl.java:947)
              >>>><     at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerImpl.java:908)
              >>>><     at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:946)
              >>>><     at weblogic.management.internal.MBeanProxy.invokeForCachingStub(MBeanProxy.java:481)
              >>>><     at weblogic.management.configuration.ServerMBean_Stub.updateDeployments(ServerMBean_Stub.java:7271)
              >>>><     at weblogic.management.deploy.slave.SlaveDeployer.updateServerDeployments(SlaveDeployer.java:1210)
              >>>><     at weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.java:362)
              >>>><     at weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resume(DeploymentManagerServerLifeCycleImpl.java:229)
              >>>><     at weblogic.t3.srvr.SubsystemManager.resume(SubsystemManager.java:131)
              >>>><     at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:964)
              >>>><     at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:359)
              >>>><     at weblogic.Server.main(Server.java:32)
              >>>>
              >>>
              >>
              >
              

  • Weblogic Migration, JDBC doesn't support XA issue

    We are doing Weblogic Migration from WLS10.3.2 to WLS10.3.6 and Java from jdk1.6.0_26 to jdk1.7.0_07
    we are facing the following error for two modules which sends email but few other modules sending email are working fine :
    javax.transaction.xa.XAException: JDBC driver does not support XA, hence cannot be a participant in two-phase commit. To force this participation, set the GlobalTransactionsProtocol attribute to LoggingLastResource (recommended) or EmulateTwoPhaseCommit for the Data Source = ABATDataSource
    *[Wed Apr 10 08:40:03.069,<gzd4qc>] DEBUG (WorkRequestServiceImpl:sentEmailNotification) - Remote Exception occurred : javax.transaction.TransactionRolledbackException: BEA1-0020971AAD25AA29B1E3: javax.transaction.xa.XAException: JDBC driver does not support XA, hence cannot be a participant in two-phase commit. To force this participation, set the GlobalTransactionsProtocol attribute to LoggingLastResource (recommended) or EmulateTwoPhaseCommit for the Data Source = ABATDataSource*
    In Weblogic10.3.6, if we change the Datasource --> Transaction from one-phase commit to Logging Last Resource,
    this issue is getting resolved.
    But all the modules were working fine with one-phase commit in Weblogic10.3.2
    Could you kindly help us to fix this issue and problem in migration.

    Hi Joe,
    We have changed the driver to XA ( Oracle's Driver (Thin XA) for instance connections; Versions:9.0.1 and later )
    and we are getting the below issue in below case
    CASE:
    I will start a transaction and it gets connected to the Database through
    the datasource in weblogic server and then it updates the data into the database which was given from the screen
    Issue:
    Caused by: java.sql.SQLException: Connection closed
    at weblogic.jdbc.wrapper.JTAConnection.getXAConn(JTAConnection.java:213)
    at weblogic.jdbc.wrapper.JTAConnection.checkConnection(JTAConnection.java:84)
    at weblogic.jdbc.wrapper.ResultSetMetaData.preInvocationHandler(ResultSetMetaData.java:61)
    at weblogic.jdbc.wrapper.ResultSetMetaData_oracle_jdbc_driver_OracleResultSetMetaData.getColumnCount(Unknown Source)
    Hence i think i cannot go for XA driver....
    It is working for Non XA driver with Logging Last Resource
    As per your note
    Logging Last Resource is an excellent way to engage one non-XA
    resource in a global transaction, with complete safety. The LLR resource is used for logging the
    XA transaction, and is committed as the first part of the second phase of the commit. As such it
    can be managed XA-wise whether that succeeds or fails.
    Can i keep as LLR itself
    Will there be any impact for my applications for below transaction scenarios ?
    One case
    I will start a transaction and it gets connected to the Database through
    the datasource in weblogic server and then it updates the data into the database which was given from the screen
    Another case
    I will start a transaction and it gets connected to the Database(2) through the datasource(2) in weblogic server and it
    reads the data from database(2) and then it updates the data(which was read) into database(1)
    I am also using EJB 3.0 version ( transaction-type - Container and Bean. Session-type - Stateless )
    Note the changes
    Previous Datasources details
    X datasource points to a my db - Non XA driver with one phase commit
    Y datasource points to a other db - Non XA driver with one phase commit
    Issue :
    javax.transaction.xa.XAException: JDBC driver does not support XA, hence cannot be a participant in two-phase commit. To force this participation, set the GlobalTransactionsProtocol attribute to LoggingLastResource (recommended) or EmulateTwoPhaseCommit for the Data Source = ABATDataSource
    [Wed Apr 10 08:40:03.069,<gzd4qc>] DEBUG (WorkRequestServiceImpl:sentEmailNotification) - Remote Exception occurred : javax.transaction.TransactionRolledbackException: BEA1-0020971AAD25AA29B1E3: javax.transaction.xa.XAException: JDBC driver does not support XA, hence cannot be a participant in two-phase commit. To force this participation, set the GlobalTransactionsProtocol attribute to LoggingLastResource (recommended) or EmulateTwoPhaseCommit for the Data Source = ABATDataSource
    Changed Datasources details
    X datasource points to a my db - Non XA driver with LLR
    Y datasource points to a other db - Non XA driver with one phase commit
    Working
    Can you please provide ur advise . thanks
    Thanks and Regards
    K.Vickram

  • BUG: Entering a "version" when deploying to a WebLogic server doesn't work

    By default when deploying to a weblogic server the "Version" is set to v2.0. If you change that to something like v2.1 when the application is deployed, the deployment logs still show the Version=2.0. What needs to be done to get the Version in deployment to accept the changes on the deployment form?

    Sorry, I wasn't clear. This is a Portal application deployed using MDS. So it doesn't have the file referenced in that blog post. The Version field I'm referring to is on the form that pops up to set the MDS repository. For reasons unknown it will always come up v2.0 even during the first deployment. Regardless of what I change it to the Version always equals 2.0 in the deployment logs.

  • How to add support for new JDBC Drivers in WebLogic Server?

    Hi!
    I am using WebLogic Server 10.
    As we know,WebLogic Server contains some jdbc drivers itself,but if we want to use another drivers besides them,what can we do?(I am using Oracle 11g,but WebLogic Server 10 doesn't contain JDBC support for it.)
    Just copy the .jar files of the drivers to the directoty "WL_HOME/server/lib" or need to configure something else?
    Thanks!
    Huang

    Hi!
    I am using WebLogic Server 10.
    As we know,WebLogic Server contains some jdbc drivers itself,but if we want to use another drivers besides them,what can we do?(I am using Oracle 11g,but WebLogic Server 10 doesn't contain JDBC support for it.)
    Just copy the .jar files of the drivers to the directoty "WL_HOME/server/lib" or need to configure something else?
    Thanks!
    Huang

  • How do I run  a weblogic platform portal 8.1 on a weblogic server 7.0 service pack 4?

    Hello.
    How do I run a weblogic platform portal 8.1 on a weblogic server 7.0 service
    pack 4?
    Is that a supported configuration? any problems / Issues ?
    Weblogic Integrator

    Why the hell do you want to do that ? ? ?
    just run it on 8.1, if you need to get info from the 7.0 server just get it.
    8.1 is a whole new framework, what you suggest a hack that is probably not supported.
    nerdi
    "Integrator" <[email protected]> wrote:
    >
    Hello.
    How do I run a weblogic platform portal 8.1 on a weblogic server 7.0
    service
    pack 4?
    Is that a supported configuration? any problems / Issues ?
    Weblogic Integrator

  • AIA CRMOD Build error - antfetch doesn't support the "antfile" attribute

    Hi.
    I am trying to build the CRMOD PIP under Linux, and I am getting the following ANT error:
    antfetch doesn't support the "antfile" attribute
    The build actually completes without any errors being posted on the screen, but the log file of the job, has this message within it, as well as a BUILD failure emanating from within the AIAInstallDriver.xml file.
    Does anyone know how to get around this issue ? The verision of ANT that we are using, is from the Weblogic Server envrionment.
    Thanks.

    I seriously hope that they don't expect us to use nightly builds of Netbeans 7.1 when the official final version of JavaFX 2.0 is released because of this issue.
    Their should be an update to Netbeans 7.0.1 upon JavaFX 2.0 final release. C'mon Oracle! You can do better than that!

  • CRMOD PIP Build Error - antfetch doesn't support the antfile attribute

    Hi.
    I am trying to build the CRMOD PIP under Linux, and I am getting the following ANT error:
    antfetch doesn't support the "antfile" attribute
    The build actually completes without any errors being posted on the screen, but the log file of the job, has this message within it, as well as a BUILD failure emanating from within the AIAInstallDriver.xml file.
    Does anyone know how to get around this issue ? The verision of ANT that we are using, is from the Weblogic Server envrionment.
    Thanks.

    I seriously hope that they don't expect us to use nightly builds of Netbeans 7.1 when the official final version of JavaFX 2.0 is released because of this issue.
    Their should be an update to Netbeans 7.0.1 upon JavaFX 2.0 final release. C'mon Oracle! You can do better than that!

  • Error in allInOne.js: Object doesn't support this property or method

    We are having an issue deploy our website (Developed in .Net) on a specific server. When we try to visualize a report on any browser we get this error:
    Webpage error details
    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; SLCC1; .NET CLR 2.0.50727; .NET CLR 3.5.21022; .NET CLR 3.5.30729; .NET CLR 3.0.30618; OfficeLiveConnector.1.4; OfficeLivePatch.0.0)
    Timestamp: Wed, 7 Apr 2010 17:52:31 UTC
    Message: Object doesn't support this property or method
    Line: 10
    Char: 281690
    Code: 0
    URI: http://{IP ADDRESS}/WebUserInterface/aspnet_client/system_web/2_0_50727/crystalreportviewers12/allInOne.js
    We have install the Crystal reports 2008 runtime and the Crystal report 2008 sp2.5 runtime. Both of them give me the same results.
    It's killing me because i have installed the same solution on many other server without any issue.
    Ben
    P.s. The Web server is  a Window Server 2003 R2 standard edition

    Perhaps using [modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] will at least tell us what dlls are loading. Look at the CR dlls. There should not be any v11 files loaded by your app.
    You may also start considering obtaining phone support for this one. I have a feeling this will take more than just forums to solve...
    Phone support can be obtained here:
    http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
    Ludek

  • Iwlist scanning gives: Interface doesn't support sc [solved]

    When I'm trying to scan for all available networks I get:
    # iwlist eth1 scanning
    eth1 Interface doesn't support scanning : Operation not supported
    My wireless card works fine if I set every parameter manually. I'm currently using the orinoco drivers that came along with ArchLinux.
    It seems like that the version of the orinoco drivers installed doesn't support the scan stuff. But building the new orinoco drivers failed with
    /usr/local/download/orinoco/orinoco-0.15rc2/orinoco_pci.c: In function `orinoco_ pci_suspend':
    /usr/local/download/orinoco/orinoco-0.15rc2/orinoco_pci.c:330: error: too many a rguments to function `pci_save_state'
    /usr/local/download/orinoco/orinoco-0.15rc2/orinoco_pci.c: In function `orinoco_ pci_resume':
    /usr/local/download/orinoco/orinoco-0.15rc2/orinoco_pci.c:347: error: too many a rguments to function `pci_restore_state'
    make[2]: *** [/usr/local/download/orinoco/orinoco-0.15rc2/orinoco_pci.o] Error 1
    make[1]: *** [_module_/usr/local/download/orinoco/orinoco-0.15rc2] Error 2
    make[1]: Leaving directory `/usr/src/linux-2.6.11.3-ARCH'
    make: *** [modules] Error 2
    So I did try the wlan-ng26 driver downloaded and installed with pacman.
    I remove the orinoco modules with
    [root@ArchThinkpad orjanp]# modprobe -r orinoco_pci
    But when I try to insert the prism2_pci module, it doesn't exist. Why?
    [root@ArchThinkpad orjanp]# modprobe prism2_pci
    FATAL: Module prism2_pci not found.
    Any heads up on what to do?
    This is iwconfig before removing the orinoco modules.
    [root@ArchThinkpad orjanp]# iwconfig
    lo no wireless extensions.
    sit0 no wireless extensions.
    eth0 no wireless extensions.
    eth1 IEEE 802.11-DS ESSID:"" Nickname:"Prism I"
    Mode:Managed Access Point: 00:00:00:00:00:00 Bit Rate:11 Mb/s
    Tx-Power=15 dBm Sensitivity:1/3
    Retry min limit:8 RTS thr:off Fragment thr:off
    Encryption key:off
    Power Management:off
    Link Quality=0/92 Signal level=-68 dBm Noise level=-122 dBm
    Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
    Tx excessive retries:0 Invalid misc:0 Missed beacon:0
    This is lspci
    [root@ArchThinkpad orjanp]# lspci
    00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev 04)
    00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 04)
    00:1d.0 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #1) (rev 02)
    00:1d.1 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #2) (rev 02)
    00:1d.2 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #3) (rev 02)
    00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 42)
    00:1f.0 ISA bridge: Intel Corp. 82801CAM ISA Bridge (LPC) (rev 02)
    00:1f.1 IDE interface: Intel Corp. 82801CAM IDE U100 (rev 02)
    00:1f.3 SMBus: Intel Corp. 82801CA/CAM SMBus (rev 02)
    00:1f.5 Multimedia audio controller: Intel Corp. 82801CA/CAM AC'97 Audio (rev 02)
    00:1f.6 Modem: Intel Corp. 82801CA/CAM AC'97 Modem (rev 02)
    01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500]
    02:00.0 CardBus bridge: Texas Instruments PCI1250 PC card Cardbus Controller (rev 01)
    02:00.1 CardBus bridge: Texas Instruments PCI1250 PC card Cardbus Controller (rev 01)
    02:02.0 Network controller: Harris Semiconductor Prism 2.5 Wavelan chipset (rev 01)
    02:08.0 Ethernet controller: Intel Corp. 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller (rev 42)
    This is lsmod before removing orinoco.
    [root@ArchThinkpad orjanp]# lsmod
    Module Size Used by
    radeon 78336 1
    ohci_hcd 23048 0
    ehci_hcd 36488 0
    irtty_sir 7552 0
    sir_dev 18636 1 irtty_sir
    irda 144184 1 sir_dev
    crc_ccitt 2432 1 irda
    parport_pc 29252 0
    parport 38600 1 parport_pc
    rtc 13260 0
    pcspkr 4044 0
    eepro100 32528 0
    orinoco_pci 7552 0
    orinoco 44172 1 orinoco_pci
    hermes 9472 2 orinoco_pci,orinoco
    yenta_socket 23560 0
    rsrc_nonstatic 11648 1 yenta_socket
    pcmcia_core 51488 2 yenta_socket,rsrc_nonstatic
    snd_intel8x0m 19396 0
    snd_intel8x0 34624 0
    snd_ac97_codec 79224 2 snd_intel8x0m,snd_intel8x0
    snd_pcm_oss 56224 0
    snd_mixer_oss 21120 1 snd_pcm_oss
    snd_pcm 98564 4 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
    snd_timer 27268 1 snd_pcm
    snd 59492 7 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
    soundcore 10848 1 snd
    snd_page_alloc 10244 3 snd_intel8x0m,snd_intel8x0,snd_pcm
    i2c_i801 8972 0
    i2c_core 23296 1 i2c_i801
    usbhid 47744 0
    uhci_hcd 33424 0
    usbcore 125560 5 ohci_hcd,ehci_hcd,usbhid,uhci_hcd
    shpchp 100996 0
    pci_hotplug 34760 1 shpchp
    tsdev 8256 0
    joydev 10560 0
    evdev 9984 0
    cpufreq_powersave 2176 0
    cpufreq_userspace 5680 0
    p4_clockmod 6164 0
    speedstep_lib 4868 1 p4_clockmod
    freq_table 5008 1 p4_clockmod
    e100 37760 0
    mii 5760 2 eepro100,e100
    nls_cp437 6144 1
    vfat 14976 1
    fat 41884 1 vfat

    orjanp wrote:
    Thanks.
    I installed the 0.15RC1 version of the Orinoco drivers found here.
    I rebooted but I still had the 0.13 version. I did a make and make install as the readme file said.
    What do I have to do to update the driver?
    do you use a PKGBUILD?
    update the driver: if it was copied to the right place and the kernel knows about it (depmod -a) it should work
    for a start, check under
    ls -la /lib/modules/`uname -r`/kernel/drivers/net/wireless/
    that your module is installed under the correct location (the orinoco files should be newer than the other ones)
    if this is so, make sure you are depmod -a (as root) ... and if even this is ok, then either you are running the new modules or something strange happened

  • HT4356 Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example. What can I do?

    Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example.
    <E-mail Edited by Host>

    It appears what happened is the installer though it was looking at a empty drive and just went ahead and installed.
    I of course am assuming here you didn't use Disk Utility to format the drive first before installing, that would wipe out your files and programs for sure.
    So what to do, what to do.
    Well there is hope for you as long as the drive wasn't Filevaulted.
    I'll explain. When a hard drive writes data for the first time to a drive, it starts at the very top and works it's way down.
    When OS X was installed the first time, it was at the top of the drive, unless you upgraded then the upgraded OS X could have been written elsewhere.
    Now when you just reinstalled OS X, the new OS went on the top of the drive, overwriting any data that was there previously, so what was there you have lost forever which is about 8GB or so. If it was the previous OS there, then your more in luck because only the old OS X was overwritten.
    The remaining space on the drive still can have a copy of your files, provided it's not overwritten yet.
    It's because when a hard drive deletes data or reformats, it doesn't remove the data off the drive or overwrites it immediately, it's just made so it's SPACE is available for new files to be written there.
    So technically one can recover the deleted data off a non-encrypted/scrubbed hard drive with special software.
    The way it does this is it reads the 1's and 0's of the files themselves, and through a lot of figuring out, can tell what that file is and what it belongs too.
    So what you will have to do is this:
    Create a data recovery/undelete external boot drive
    or if you don't have the skills, then take it to a local PC/Mac tech and they can do a direct image of the drive and then you can run Data Rescue on it to rebuild your files.

  • 3000 J115 7387 - Current BIOS 2NKT31A doesn't support 4gb RAM

    I have a Lenovo 3000 Desktop J115 7387-26u and the current BIOS, just downloaded and tested from Lenovo's "support" site, doesn't support 4gb of RAM properly.  I have dual 2gb DIMMs, for a total of 4gb, and both Lenovo's PC-Doctor diagnostics and another memory scanner report to me that I have 4gb.  See this screen print showing PC-Doctor's RAM report compared to what Windows "sees".  
    When I boot the system, the BIOS only reports 3006mb RAM is present.  Clearly it's recognizing both DIMMs.  I've swapped the DIMMs and the results are the same.
    Lenovo, PLEASE RELEASE A BIOS that properly supports what the system claims to support!
    Message Edited by GeoApps on 04-06-2009 03:00 PM

    dhaj1964 wrote:
    just to let you know....32 bits systems....can only read 3gigs of memory....64 bits system can read more .....
    Two things.  First, "just so you know", the Lenovo 3000 J115 7987 is an Athlon 64 X2 (which you would know if you checked the system specs),and second, I'm talking about the BIOS failing to recognize the RAM that the system specs claim it should be recognizing.  This is regardless of OS.

  • How do I get my music from iTunes Match to my older ipod that doesn't support iTunes Match

    I have an old ipod ios 4.2 that doesn't support iTunes Match how do i get my music from the cloud to my computer library in order for me to put the music onto my older ipod for the car

    Setup iTunes Match on your computer. Download the songs to your iTunes libary and then sync to your old iPod.
    http://www.apple.com/itunes/itunes-match/

  • How can I watch a Disney movie from the Disney website I have purchased movie cd and I can go to the website on by gateway computer but can't get it to play on my iPad it wants me to download flash but apple doesn't support flash or I can down loadQuickTi

    How can I watch a Disney movie from the Disney website I have purchased movie cd and I can go to the website on by gateway computer but can't get it to play on my iPad it wants me to download flash but apple doesn't support flash or I can down loadQuickTime but don't know how. Says to email website did that but takes me back to same place to email help

    Contact iTunes Customer Support, but honestly, there are no returns for iTunes purchases.

  • I have a model 1,1 Mac Book in the black case.  How can I transfer about 30 GB of stuff to a MacBook Pro running Yosemite?  Can't do a Thunderbolt transfer.  The Seagate backup drive I bought doesn't support 10.5.8.  Thank you.

    How do I transfer 30 GB of stuff, mostly text documents, bookmarks and a few hundred photos from a MacBook model 1,1 in the black case, purchased in (2007?) running Leopard 10.5.8 with a 667 bus, 2 GB, 256 GB to a MBP 13" Retina running Yosemite 10.10.1?  Using Migrate is out.  Discovered after I bought it that the Seagate Plus Backup for Mac does not work with 10.5.8.  OnetoOne recommends backing up my data before I do that, which seems like a good idea.  Have a 801.11 n Time Capsule that also isn't working so that is not presently an option.  Thank you.

    The Seagate backup drive I bought doesn't support 10.5.8
    The only reason I can see for that is it's formatted NTFS, which would likely be Read Only in 10.5.x, if you can reformat it MacOS extended, which would erase everything on it now, then that should work for your purposes.

Maybe you are looking for