WebLogic Server 9 with Windows Server 2003 SP2

Hi,
DO you know if Weblogic 9 can work without any problem on a Windows Server 2003 SP2? I looked an i only find that it's supported on Windows Server 2003 SP1.
Hope you can help me
Greetings
Norberto

We are seeing alot of these - using the 'retry' option when scheduling gets the Publication to finish successfully - the log however is full of these messages.
Did you discover anything further Ranjit?
Regards,
Ferdie.

Similar Messages

Integrate On-Premises Exchange Server With Windows Server Essentials

I have Exchange Server 2013 installed on Win Server 2012 R2 joined to Windows Server Essentials domain. Attempting to integrate the Exchange Server into the Essentials domain from the Essentials Dashboard using the wizard fails with the error, "Cannot
locate an Exchange Server on the network. Make sure that your Exchange Server is setup and that it is connected to the network". I can communicate with the server in multiple ways from the Essentials Server and other computers on the domain. Mail
flow in and out of the Exchange Server works without issue. I can use the various management tools to administer the Exchange Server. The only task I cannot complete is integrating it into the Essentials environment which I need to do to move on
to creating user mailboxes for user accounts setup in AD.
All research to date has come up empty handed.
Help!

Hi RSUL,
Any update?
On current situation, would you please let me confirm something more? It may help me to understand this issue
clearly.
Would you please let me know how join the Windows Server 2012 R2 (which had been installed Exchange Server 2013) to Windows Server Essentials domain? Did use Connector software
(type http://servername/connect)?
On server essentials, please open Dashboard and navigate to DEVICES. Then check the Status of this server which had been installed Exchange Server 2013.
Currently, the Services Integration features, including on-premises Exchange integration, are only supported in a single domain controller environment. Meanwhile, the integration
wizard must be run on a domain controller.
In addition, please refer to the following article and check if can help you.
On
Premises Exchange Integration Windows Server 2012 Essentials
Integrate an On-Premises Exchange Server
with Windows Server Essentials
By the way, please check Event Viewer and some relevant logs if you can find some more clues.
Hope this helps.
Best regards,
Justin Gu

T200v Server with Windows SBS 2003

Just ordered a TS200v Server, can I install Windows SBS 2003 on this Server or will I need to upgrade to Windows SBS 2008?
Solved!
Go to Solution.

Hello,
SBS2003 is not officially supported, I think only 2008 is. You can try but might be issue with some drivers.
J.
Jan Solar
Product Marketing
(not a technical support)
http://blog.lenovo.com/author/jsolar/

Get server with Windows Server 2012 R2 or wait for Windows Server "10"?

We are looking to get a new server this year but with Windows 10 coming out shortly/this year, wouldnt it be better to wait until Windows Server "10" is released THEN get the server?
Thank you

Hi,
Windows 10 is the next version of the Windows client operating system. Until now, there is no official information of Windows Server operating system about the version next to Windows Server 2012 R2. You may pay attention to Microsoft official website for
the information about the newest product.
Windows Server：
http://technet.microsoft.com/library/bb625087.aspx
Here is the instruction about Windows 10 Technical Preview for Enterprise, just for your reference:
http://technet.microsoft.com/en-us/windows/dn798751.aspx?ocid=wc-tn-answr
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

HELP! Recover lost array from X serve with windows server

We have an Xserve raid with two 7 drive arrays mounted as one drive on a windows sever 2003. We lost one array and the second array started rebuilding when disk was reinserted. The disks in the first now show as "spare" and the Windows equivalent disk number now shows as "missing" and failed. However disk 0 which is array #2 shows online but failed. The question is--- Do we have any data left on the second array since it rebuilt? Do we try to rebuild the first array hoping Windows will "find" the missing drive? Can we restore the array somehow since retore in disk utility is greyed out? Any advice would be appreciated.
Thanks

We have an Xserve raid with two 7 drive arrays
mounted as one drive on a windows sever 2003. We
lost one array and the second array started
rebuilding when disk was reinserted.
This sounds like you're using RAID 50 (lots of people use it not knowing how easy it is to lose all your data in an instant). You said 'we lost one array' - if that's true, then it's time to nuke and pave - you won't get any of your data back.
MacBook Pro Mac OS X (10.4.6)

Urgent help needed to setup Forms 6i Server on Windows Server 2003

Hello,
I am trying to install Forms 6i Server from the Forms/Reports 6i Release 2 CD onto a server with Windows Server 2003 Standard Editon (services pack 1) installed.
The Oracle Installer produced the following error when I tried to install the Forms 6i Server From the Forms/Reports 6i Release 2 CD:
user1.pin(20); os_error while spawning ifsrv60 -install forms60server port=9000 mode=socket batch=yes.
Has anyone successfully installed Forms 6i Server from Forms/Reports 6i Release 2 CD onto a Windows Server 2003 server?
Any help is appreciated.
Phil

You it obtained to install the FORMS 6i SERVER in Windows 2003 ?
I am with the same problem and not yet I obtained solution.

AD RMS cluster with windows server 2008 R2 and Windows Server 2012 R2

please i'm trying to add ADRMS server with windows server 2012 R2 with our ADRMS 2008 R2 cluster. and it fails with the following error:
"The Client DLL version doesn't match with the one of the servers"
so i want to know is it supported to add RMS 2012 R2 server to RMS 2008 R2 Cluster
Thanks

They can't coexist, but usually what happens is you add the 2012 server, it migrates your cluster database and then your 2008r2 servers can no longer connect.
What is this value:
DRMS_Config database
dbo.DRMS_ClusterPolicies
AdrmsFileVersion

Is J2EE compatible with Windows server 2003?

Is J2EE compatible with Windows server 2003? Whenever I try to install it says its not compatible, and the sun site only mention XP and 2000 Advanced Server.
Does anyone use J2EE on win2k3server? Which version do you use?

Which J2EE version are you trying to install and where did you download it from? J2EE 1.4 SDK should install and run on Windows 2003. At what point in installation exactly are you getting this message?

RH Server 9 compatibility with Windows Server 2008 SP2/SQL Server

Our tech support people are preparing for a first install of RH Server 9. They have asked me to find out whether there is a recent patch that would enable it to work with Windows Server 2008 SP2 64 bit and MS SQL Server 2008.
If there is not yet a patch, will there be one for this OS/DB combination in the future, and when?
This is in reference to the knowledgebase article at http://kb2.adobe.com/cps/884/cpsid_88483.html which gives a "not recommended" status to this combination.
Our infrastructure team would prefer to use this combination if it is possible.
Second question from the tech team: Do we need to separate the RoboHelp application from the database or can they both reside on the same server?

To answer your first question, no there is no patch to allow SQL Server 2008 to run on a 64 bit server. To answer your second question, I don't know. This is a user to user forum and therefore we are not party to any discussions on when or if a patch will be released. You could sumbit a feature request which the Adobe RoboHelp Product Manager will get. This will help advance your case. You can submit it here:
http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38
The RoboColum(n)
@robocolumn
Colum McAndrew

SMB Extremely Slow over VPN With Windows Server 2003

Hello everyone,
I finally convinced another person at my law firm to switch to a MacBook Pro. In preparation, I am attempting to fix any compatibility problems that would put off this new user. Unfortunately, our IT guy recently switched us to a Sonicwall SSL-VPN 200. I can connect to our server through the VPN client with no problems and I can mount our internal file server, but the connection is incredibly slow. My initial reaction was that it must be a problem with Windows Server 2003 and SMB, but I was previously able to connect to and operate on our VPN through our old Fortinet (ipsec) device with no problems. Simply put, directory switching, file moving, etc. are all now incredibly slow over the VPN. Help!

Full support for SMB signing did not appear until Samba 3.0.2 released in 2004. Mac OS X 10.5 (Leopard) supports SMB signing. Previous versions require either disabling SMB signing server-side, using a third party SMB client, using the command-line smbclient program, or updating samba yourself.

Networking macbook with windows server 2003 LAN

Can anyone refer me to a good, very basic source for how-to set up a macbook on a windows network server running Windows Server 2003? I would be running a lot of apps in Windows environment using Parallels.

According to:
"The Windows Server 2003 domain and forest functional levels are deprecated. When you create a new domain or forest,
you should consider using a functional level from Windows Server 2008 or newer. When you deploy Windows Server 2012 R2 into an existing Windows Server 2003 environment, you will be notified to move to a newer functional level."
(http://technet.microsoft.com/en-us/library/dn303411.aspx) you can introduce Windows 2012 r2 domain kontroler
in Windows 2003 forest but you should consider upgrading to higher functional levels.
Conan the Coder | Exchange Administrator: <a href="http://www.codetwo.com/?sts=3368">CodeTwo</a>
<a href="http://www.codetwo.com/exchange-migration/?sts=3368"><img src="http://www.codetwo.com/media/images/c2-signature-em-bannerf2939f.png" title="CodeTwo Exchange Migration"></a>
If this post helps resolve your issue, please click the &quot;Mark as Answer&quot; or &quot;Helpful&quot; button at the top of this
message. By marking a post as Answered, or Helpful you help others find the answer faster.

JMS Compatibility with Windows Server 2008

Our product uses the JBoss 4.0.4 as an application server. Currently we are supporting Windows Server 2003 and planning to support Windows Server 2008. We want to know that is JMS fully compatible with Windows Server 2008 (64 bit)?
Please respond if anybody has any idea.
Thanks

JMS services are provided by your container (JBoss) not your operating system.
You should just make sure that your container version is supported on your operating system version.

Oracle Database 11g-R2 with Windows Server 2008

Hi to All Respected Gurus!
Recently I have downloaded Oracle Database 11g-R2.
Will it work with Windows Server 2008-R2?
Please guid eme.
Thanks in Advance.
Muhammad Uzair
Oracle Application Developer
Oracle APEX Developer
Pakistan
+92 (333) 7058754

uzairmalik wrote:
Hi to All Respected Gurus!
Recently I have downloaded Oracle Database 11g-R2.
Will it work with Windows Server 2008-R2?
Please guid eme.
Did you look in the installation guide for the software requirement for 11.2? You could had easily found the answer from there by yourself.
http://docs.oracle.com/cd/E11882_01/install.112/e24186/reqs.htm#CHDHGGFE
From the above link,
>
Requirement Value
Operating System
Oracle Database for 32-bit Windows is supported on the following operating systems:
Windows Server 2003 - all editions
Windows Server 2003 R2 - all editions
Windows XP Professional
Windows Vista - Business, Enterprise, and Ultimate editions
Windows Server 2008 - Standard, Enterprise, Datacenter, Web, and Foundation editions. The Server Core option is not supported.
Note: Check My Oracle Support (formerly OracleMetaLink) for more information about Hyper-V support.
Windows 7 - Professional, Enterprise, and Ultimate editions
Windows Multilingual User Interface Pack is supported.
>
Aman....

Restore bkf Backup Files on Tape with Windows Server 2008 R2

We have to migrate an application from a legacy server (OS Windows Server 2003) to a new server (OS Windows Server 2008 R2).
Due to legal obligations we have to keep backups for 10 years. Until now NTBACKUP was used to store the data on tape.
We must be able to restore data from tapes of the last 10 years for audit purposes.
We installed Update für Windows Server 2008 R2 x64 Edition (KB974674) containing NTBackup-RestoreUtility on the new server.
It seems that this tool is not able to restore from tapes.
How can we fullfil the legal requirements to restore backuped data from tape on Windows Server 8 R2 (and in future with Windows Server 2012 R2)?

Hi,
This is Exchange server forum. Actually, we have a dedicated support team regarding the Microsoft Windows Server. I recommend you ask your question on our Windows Server forum which is staffed by more experts specializing in this kind of problems. Thanks
for your understanding.
For your convenience:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?category=windowsserver
Hope it helps.
If you have any problem with Exchange server, welcome to our Exchange server forum.
Best regards,
Amy Wang
TechNet Community Support

Windows server 2012 as primary DC and DNS server and windows server 2003 as secondary DC and DNS

Migration from windows server 2003 AD DC and DNS server to windows server 2012 R2,
Cannot I set up Windows server 2012 R2 as primary DC and DNS , windows server 2003 as secondary DC and DNS ? (for backup server when server 2012 fail, user can continue to login and access internet services)

You can mix both as long as your Forest and Domain Functional level are Windows Server 2003. However, I would like to bring your attention to this blog about known problems when mixing DCs with Windows Server 2003 and 2012 R2 OS:
http://blogs.technet.com/b/askds/archive/2014/07/23/it-turns-out-that-weird-things-can-happen-when-you-mix-windows-server-2003-and-windows-server-2012-r2-domain-controllers.aspx
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Licensing issue with Windows Server 2012 R2 Essential

Hi,
we purchased a server that came with Windows Server 2012 Essentials. and we found out some of the issue regarding the licensing. I would like to verify it with the experts here.
1. This Essential O.S. cannot be deployed as a member server in the domain, only Windows server 2012 r2 Standard and data center is capable as deploy as a member server?
2. does it work with a single domain with multiple domain controllers and one primary domain controller? Example, 10 offices in different states, each location has a domain controller in their office, I'm installing to install this Essential server as another
domain controller in one of the offices for redundancy purpose. I promoted this server into domain controller with success, but it gives me an fsmo error everyday, and warning about shutting down if i don't transfer the fsmo role to this server.
3. which leads to this question, so this Essential OS can only be deploy as a single domain as the primary domain controller? Up to 25 user and 50 device license?
4. Is it possible to deploy it as a domain controller (that office has less than 25 users) in that office while syncing correctly with the other 10 domain controllers in other offices, they are all in the same single domain? I can't make this work, and I
think due to the Essential O.S.'s limitation.
5. we use a vpn connection to connect all the office together, and all the domain controller uses lan ip address to communicate with each other.
Thank you for the help in advance. I have been researching for the past couple days, but I still couldn't get a clear answer. Thank you again.

Hi Cliff,
Thank you for your reply.
1. We will get a new server 2012 r2 standard to deploy as member server.
2 and 3. Only ONE domain controller can hold all FSMO roles in a single domain, correct? Currently an windows 2003 enterprise, this is our first server in our domain, it holds all the FSMO roles currently.
4. Yes, we realized essentials will not work for us, so we are switching to 2012 r2 standard to deploy for the new
domain controller for our new office, still under the same domain.
5. This wasn't a question, just wanted to give out the connection information.
The problem was that We didn't read the Essentials in detail when buying the new server, on dell website, it said it was perfect for small business, we didn't know it has to run as a primary DC. it was great in price, and it doesn't need CALs.
but we quickly realized after deploying it as a DC, it gives us error about Server Licensing compliance, and will shut down automatically. Then we were going to use it as a member server to run application, and realized we couldn't. So we are returning the
server, and getting a new one with standard r2 2012 and CALs license.
It was a costly mistake.
Thank you again.

WebLogic Server 9 with Windows Server 2003 SP2

Similar Messages

Maybe you are looking for