Weblogic Server Domain Metrics

Hi, using the solaris 10.2 agent, i added two weblogic domains running in a windows box (there are no 10.2 agents for windows yet) i'm missing some metrics,
maybe because the agent is not running on the same machine, but there are two targets that are in "Target is temporarily in status pending state.", and in the dashboard they are in "Unknow Avaliability" but going inside the target i see they're up. the targets are both the BEA Weblogic Domains, the Cluster and Managed Servers targets are ok.
The error i get when i click on the metric error link is this:
An error has occurred! Availability metric not found for target "target.nameofdomain"
Is there

Message Cannot open /var/log/sa/sa12: No such file or directory em_error=failed to execute sar at /opt/oracle/product/em/agent10g/sysman/admin/scripts/hostpagingactivity.pl line 166.
=> check whether sar is installed?
=> check whether sysstat is started at boot time?
chkconfig sysstat
... if off, then
chkconfig sysstat on
Regards,
martin

Similar Messages

Failed to start Admin Server for Weblogic Server Domain

I Created a domain named mydomain in weblogic server 10.3 in server 2003.But when i start Admin Server for Weblogic Server Domain from startmenu, it failed.
I examined the log under domains\mydomain\servers\AdminServer\logs\AdminServer.log and got the following information:
java.lang.NoClassDefFoundError:weblogic/ldap/EmbeddedLDAPChange
at weblogic.ldap.EntryChangeListenerImpl.receiveEntryChanges(EntryChangeListenerImpl.java:28)
Caused by :java.lang.ClassNotFoundException: weblogic.ldap.EmbeddedLDAPChange
at java.net.URLClassLoader$1.run(URLClassLoader.java:199)
Caused by :java.util.zip.ZipException: error reading zip file
at java.util.zip.ZipFile.read(Native Method)
at java.util.zip.ZipFile.access$1200(ZipFile.java:29)
weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException: weblogic.security.spi.ProviderInitializationException: A failure occurred attemping to load LDIF for provider RoleMapper from file ...\domains\mydomain\security\XACMLRoleMapperInit.ldift.
at ...(CommonSecurityServiceManagerDelegateImpl.java:465)
Caused by: com.bea.common.engine.ServiceInitializationException: weblogic.security.spi.ProviderInitializationException: A failure occurred attemping to load LDIF for provider RoleMapper from file ...\domains\mydomain\security\XACMLRoleMapperInit.ldift.
at .. (ServiceEngineImpl.java:365)
Caused by: com.bea.common.engine.ServiceInitializationException: weblogic.security.spi.ProviderInitializationException: A failure occurred attemping to load LDIF for provider RoleMapper from file ...\domains\mydomain\security\XACMLRoleMapperInit.ldift.
at .. (BootStrapServiceImpl.java:910)
Caused by: <openjpa-1.1.1-SNAPSHOT-r422266:891341 nofatal user error>kodo.jdo.UserException: This operation cannot be perfomed while a Transaction is active.
at org.apache.openjpa.kernel.BrokerImpl.close(BrokerImpl.java:4087)
####<Critical><WebLogicServer><SOA><Adminserver><main><<WLS Kernel>><><><1282012271468><BEA-000362><Server failed. Reason:
There are 1 nested errors:
weblogic.security.service.SecurityServiceRuntimeException: [Security:090399] Security Services Unavailable
at weblogic.security.service.CommonSecurityserviceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:916)
I ignored some detailed error message.The runtime environment is server 2003 Enterprise Edition sp2.
Thx in advance for any reply.

Hello Djam,
Please review the following:
The FMW WebLogic Server (WLS) installation has been configured to use a non-default Java temporary files directory,
i.e. the following has been set in the WebLogic startup or setDomainEnv.sh script:
EXTRA_JAVA_PROPERTIES="-Djava.io.tmpdir=/appl/oracle/temp_java_files ${EXTRA_JAVA_PROPERTIES}"
Reference: How to Change the WebLogic Server Location for Temporary Files (Doc ID 1336002.1)
When the Middleware home was restored the directory specified by java.io.tmpdir parameter was missing,
Therefore an IOException occurred when opening the wallet and WLS was unable to initialize the OPSS successfully.
To resolve the issue re-create the directory specified by the java.io.tmp dir parameter, and make sure the owner and group access are the same as for the FMW installation.
Unable Start AdminServer: JPS-01050: Opening of wallet based credential store failed. Reason java.io.IOException (Doc ID 1923395.1)
Bogdan

Error in creating an Oracle WebLogic Server domain

Hi Everyone,
Am getting this following error when I tried to create a Weblogic Server Domain,Kindly help.I displayed the screen shot below,

Hi
It seems that the user installing the software does not have administrative rights.Login as user with Administrative right to configure WCC 11g

Enabling Trust Between WebLogic Server Domains

Hi everyone,
We have two sites, each one running one WL 8.1 instance. The problem is that we have different users in each one, and they need to access both sites (using a RMI call).
When the user is created in both sites, there is no problem. But we do not want to replicate all users in all sites.
So this is what we are trying to do:
Create the user in one site and enable trust between Weblogic Server domains (giving both sites the same password), so once one user is authenticated, the other site will not try to authenticate this user again. But since this user does not exist in the other site, he has no permission to do anything at all. Because of that we receive the following error message: "User a7ax does not have permission on br to perform lookup operation."
Does anyone have any idea about how we can handle this, and enable the users to use other sites, without creating the user in both sites?
Thanks in advance.
Cesar

In order to debug this issue you need to determine which kind of security has been applied on the web service deployed on remote weblogic server.
Whether it requires username/password from the calling web service ?
or it requires any kind of digital certificate from the calling web service etc......
the most usual secnario where cross-domain security is required is as:
If a user- Test calls a service- ServiceA on Weblogic Domain-domainA and provides its credentials and is authenticated properly.
Then if this service requires to call another service -ServiceB on another Weblogic Domain - DomainB which is also secured then there should be a cross-domain trust should be enabled between the domains DomainA and DomainB so that the subject populated in the domainA can be transferred to DomainB.
Now you should determine whether this is the secnario you are trying to achieve or it is something else.
Also try to use the following debug flag in the DomainB where the provider service is deployed to get the exact reason why it is failing to verify the security check.
-Dweblogic.DebugSecurityAtn=true
This debug flag is enabled as JAVA_OPTIONS.
Thanks,
Sandeep

Failure while extending weblogic server domain.

Hello
We are facing failure for registering/extending OID, OVD and OHS instances with the WebLogic Server Domain(10.3.5.0) on Windows. Weblogic domain server and URL(http://hostname:7001/console) is up and running; however we are not able to Telnet 7001 port or access Weblogic domain URL from OID/OVD/OHS server.
Please note OID, OVD/OHS/Admin server are hosted on three different m/c.
Web Logic Server Domain: 10.3.5.0
OID, OVD, OHS: 11.1.1.5
OS: windows server 2008 32 bit
While extending we are getting error:
INST-07242: Unable to Connect to Oracle Weblogic Middleware Admin Server
While registering using below opmnctl command getting error:
Command Used:
C:\Oracle\admin\oid_inst1\bin>opmnctl registerinstance -adminHost hostname -adminPort 7001 -adminUsername weblogic
Command requires login to weblogic admin server (hostname):
Username: weblogic
Password:
Command failed: Unable to connect to the admin server. Verify it has been start
ed and is accessible.
Details are logged in C:\Oracle\admin\oid_inst1\diagnostics\logs\OPMN\opmn\provi
sion.log
opmnctl registerinstance: failed.
Error: Refer attached log file for more details.
Caused by: javax.naming.NamingException: Couldn't connect to the specified host [Root exception is org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 203 completed: No]
at weblogic.corba.j2ee.naming.Utils.wrapNamingException(Utils.java:83)
at weblogic.corba.j2ee.naming.ORBHelper.getORBReferenceWithRetry(ORBHelper.java:656)
at weblogic.corba.j2ee.naming.ORBHelper.getORBReference(ORBHelper.java:594)
at weblogic.corba.j2ee.naming.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:85)
at weblogic.corba.j2ee.naming.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:31)
at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:46)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
at javax.naming.InitialContext.init(InitialContext.java:223)
at javax.naming.InitialContext.<init>(InitialContext.java:197)
at weblogic.management.remote.common.ClientProviderBase.makeConnection(ClientProviderBase.java:178)
... 9 more
Caused by: org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 203 completed: No
at com.sun.corba.se.impl.logging.ORBUtilSystemException.writeErrorSend(ORBUtilSystemException.java:2259)
at com.sun.corba.se.impl.logging.ORBUtilSystemException.writeErrorSend(ORBUtilSystemException.java:2281)
at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.writeLock(SocketOrChannelConnectionImpl.java:957)
at com.sun.corba.se.impl.encoding.BufferManagerWriteGrow.sendMessage(BufferManagerWriteGrow.java:53)
at com.sun.corba.se.impl.encoding.CDROutputObject.finishSendingMessage(CDROutputObject.java:144)
at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.finishSendingRequest(CorbaMessageMediatorImpl.java:247)
at com.sun.corba.se.impl.protocol.CorbaClientRequestDispatcherImpl.marshalingComplete1(CorbaClientRequestDispatcherImpl.java:355)
at com.sun.corba.se.impl.protocol.CorbaClientRequestDispatcherImpl.marshalingComplete(CorbaClientRequestDispatcherImpl.java:336)
at com.sun.corba.se.impl.protocol.CorbaClientDelegateImpl.invoke(CorbaClientDelegateImpl.java:129)
at com.sun.corba.se.impl.protocol.CorbaClientDelegateImpl.non_existent(CorbaClientDelegateImpl.java:232)
at org.omg.CORBA.portable.ObjectImpl._non_existent(ObjectImpl.java:137)
at weblogic.corba.j2ee.naming.ORBHel
Trouble shooting steps tried:
• Firewall Off on both the server
Edited by: 993281 on Mar 12, 2013 2:52 AM

Did you get an answer to this problem? The opmnctl registerinstance failed with exactly the same error. In my case I know I misspelled the domain name during the install dialog and now need to correct the name, but I can't find where the name is located to correct it or which tool to use or which file I should edit? I looked through the Weblogic admin console and EM admin console but with no luck. Do you or anyone else know how I can edit the name of the host so I can move forward with my installation? It seems like it would be simple to find and change. Thanks.

Adding WebLogic Server Domain fails with UnsupportedClassVersionError

Hi all,
I am trying to add a WebLogic Server 10.3 domain to the Grid Control, but receive the following error:
java.lang.UnsupportedClassVersionError: weblogic/jndi/Environment (Unsupported major.minor version 49.0)
The discovery wizards asks for 'Administration Server Home Directory'
The help document states:
If you are adding BEA WebLogic Manager Server Release 9.x or higher, then specify the absolute path to the directory
where wljmxclient.jar and wlclient.jar files are located. For example, <WL-HOME>/server/lib.
The JDK version of BEA WebLogic is 1.6.x
The JDK version of the Grid Agent is 1.4.2
Clearly their is a mismatch here!
Is there any solution to this?
Thanks,
Knut
Edited by: user585799 on Feb 17, 2009 2:13 AM

This is not a supported configuration .10.2.0.4 GC is not certified with WLS 10.3
Edited by: mnazim on Feb 17, 2009 2:56 AM

About WebLogic Server domain failover

Hi Gurus,
I have ran into problem when we have primary site failover to secondary site. If we want to have this failover automated, how should we configure? If this is a site to site failover which means IP will be changed, how can we do it without interrupt the original encryption.
I suppose we need to copy
1. config.xml
2. filerealm.properties
3. boot.properties
4. SerializedSystemIni.dat
5. anything inside /security folder.. etc
The WebLogic Server version is 10.3.0
FYI.
<AdminServer> <main> <<WLS Kernel>> <> <> <1287220805185> <BEA
-000386> <Server subsystem failed. Reason: java.lang.AssertionError: java.lang.reflect.InvocationTargetException
java.lang.AssertionError: java.lang.reflect.InvocationTargetException

Hi Kal,
Thanks for your reply.
Could you or anyone else comment on whether to replicate the primary site's configuration to the DR side or keep using the DR side's own configuration? What is the proper approach. p.s. There will be difference anyway, e.g. IP, hostname, etc.
I have read some posts talking about a workaround to start the wls installation with development mode and then change encrypted text to clear text and then change to production mode.
Regards,
Fisher

Enabled WebLogic Server domain administration port, now can't connect

I am having troubles in an OID 11g cluster using new custom identity and Java standard trust, so setup a basic lab server with WLS 10.3.3 admin server and one managed server. All was well.
I enabled the domain-wide admin port (9002) and can access the admin server console via https://localhost:9002/em.
I am unable to start the managed server with ADMIN_URL of t3s://localhost:9002 or https://localhost:9002 or using the fully-qualified host name. It says "There is no server running at t3s://localhost:9002" for example.
I enabled SSL debugging, and it just "gives up" quietly, deciding there is no SSL trust:
<Mar 30, 2011 7:38:51 PM EDT> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: Certificate>
<Mar 30, 2011 7:38:51 PM EDT> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 0 in the chain: Serial number: -
33322804764672255361779797406005394240
Issuer:C=US, ST=MyState, L=MyTown, O=MyOrganization, OU=FOR TESTING ONLY, CN=CertGenCAB
Subject:C=US, ST=MyState, L=MyTown, O=MyOrganization, OU=FOR TESTING ONLY, CN=myhostname.acme.com
Not Valid Before:Sun Mar 27 17:37:38 EDT 2011
Not Valid After:Sat Mar 28 17:37:38 EDT 2026
Signature Algorithm:MD5withRSA
>
<Mar 30, 2011 7:38:51 PM EDT> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 1 in the chain: Serial number:
46914133237969612308202465797198785159
Issuer:C=US, ST=MyState, L=MyTown, O=MyOrganization, OU=FOR TESTING ONLY, CN=CertGenCAB
Subject:C=US, ST=MyState, L=MyTown, O=MyOrganization, OU=FOR TESTING ONLY, CN=CertGenCAB
Not Valid Before:Thu Oct 24 11:54:45 EDT 2002
Not Valid After:Tue Oct 25 11:54:45 EDT 2022
Signature Algorithm:MD5withRSA
>
<Mar 30, 2011 7:38:51 PM EDT> <Debug> <SecuritySSL> <BEA-000000> <validationCallback: validateErr = 0>
<Mar 30, 2011 7:38:51 PM EDT> <Debug> <SecuritySSL> <BEA-000000> < cert[0] = Serial number: -
33322804764672255361779797406005394240
Issuer:C=US, ST=MyState, L=MyTown, O=MyOrganization, OU=FOR TESTING ONLY, CN=CertGenCAB
Subject:C=US, ST=MyState, L=MyTown, O=MyOrganization, OU=FOR TESTING ONLY, CN=myhostname.acme.com
Not Valid Before:Sun Mar 27 17:37:38 EDT 2011
Not Valid After:Sat Mar 28 17:37:38 EDT 2026
Signature Algorithm:MD5withRSA
>
<Mar 30, 2011 7:38:51 PM EDT> <Debug> <SecuritySSL> <BEA-000000> < cert[1] = Serial number:
46914133237969612308202465797198785159
Issuer:C=US, ST=MyState, L=MyTown, O=MyOrganization, OU=FOR TESTING ONLY, CN=CertGenCAB
Subject:C=US, ST=MyState, L=MyTown, O=MyOrganization, OU=FOR TESTING ONLY, CN=CertGenCAB
Not Valid Before:Thu Oct 24 11:54:45 EDT 2002
Not Valid After:Tue Oct 25 11:54:45 EDT 2022
Signature Algorithm:MD5withRSA
>
<Mar 30, 2011 7:38:51 PM EDT> <Debug> <SecuritySSL> <BEA-000000> <SSLTrustValidator returns: 0>
<Mar 30, 2011 7:38:51 PM EDT> <Debug> <SecuritySSL> <BEA-000000> <Trust status (0): NONE>
<Mar 30, 2011 7:38:51 PM EDT> <Debug> <SecuritySSL> <BEA-000000> <Performing hostname validation checks: localhost>
<Mar 30, 2011 7:38:51 PM EDT> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: false>
<Mar 30, 2011 7:38:51 PM EDT> <Debug> <SecuritySSL> <BEA-000000> <873462440 SSL3/TLS MAC>
<Mar 30, 2011 7:38:51 PM EDT> <Debug> <SecuritySSL> <BEA-000000> <873462440 received HANDSHAKE>
<Mar 30, 2011 7:38:51 PM EDT> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: ServerHelloDone>
I set flags like this: -Dweblogic.security.TrustKeyStore=DemoTrust -Dweblogic.security.SSL.ignoreHostnameVerification=true , no success.
Any assistance you could provide would be much appreciated! Thank you.

More info: I'm using the default DemoTrust setup.
Correction: I can connect to the console at https://localhost:9002/console (not /em).

Issue in packing Weblogic portal domain

Hi Guys,
I am trying to pack my domain from HOST A using command :
pack -managed=true -domain=C:\Oracle\Middleware\user_projects\domains\Edlink -template=C:\Oracle\edlink.jar -log=c:\oracle\edlink.log -template_name="template_name"
and wants to unpack it on HOST B
But I am able to see below errors in my pack log file:
2014-09-04 05:08:46,067 INFO [runScript] com.bea.plateng.domain.script.ScriptExecutor - read domain from "C:\Oracle\Middleware\user_projects\domains\EDLINK"
2014-09-04 05:08:48,739 ERROR [runScript] com.bea.plateng.domain.jdbc.TemplateDatabaseInfoHelper - FATAL ERROR: database.xml validation error!
2014-09-04 05:08:48,739 ERROR [runScript] com.bea.plateng.domain.jdbc.TemplateDatabaseInfoHelper - database XML parsing failed: error: cvc-complex-type.2.4a: Expected element 'sql-statement@http://xmlns.oracle.com/weblogic/template-database' instead of 'datasource-mapping@http://xmlns.oracle.com/weblogic/template-database' here in element test@http://xmlns.oracle.com/weblogic/template-database
2014-09-04 05:08:48,739 ERROR [runScript] com.bea.plateng.domain.jdbc.TemplateDatabaseInfoHelper - fail to parse database.xml
java.lang.Exception: Database.xml validation failed.
at com.bea.plateng.domain.jdbc.TemplateDatabaseInfoHelper.parseTemplateDatabaseInfo(TemplateDatabaseInfoHelper.java:582)
at com.bea.plateng.domain.TemplateBuilder.parseDomainDirectory(TemplateBuilder.java:835)
at com.bea.plateng.domain.TemplateBuilder.buildDomainTemplate(TemplateBuilder.java:1342)
at com.bea.plateng.domain.TemplateBuilder.buildNewDomainTemplate(TemplateBuilder.java:1287)
at com.bea.plateng.domain.TemplateBuilder.buildNewDomainTemplate(TemplateBuilder.java:1279)
at com.bea.plateng.domain.script.ScriptExecutor.readTemplate(ScriptExecutor.java:416)
at com.bea.plateng.domain.script.ScriptParserClassic$StateMachine.processRead(ScriptParserClassic.java:522)
at com.bea.plateng.domain.script.ScriptParserClassic$StateMachine.execute(ScriptParserClassic.java:428)
at com.bea.plateng.domain.script.ScriptParserClassic.parseAndRun(ScriptParserClassic.java:150)
at com.bea.plateng.domain.script.ScriptParserClassic.doExecute(ScriptParserClassic.java:112)
at com.bea.plateng.domain.script.ScriptParser.execute(ScriptParser.java:73)
at com.bea.plateng.domain.script.ScriptParser.execute(ScriptParser.java:36)
at com.bea.plateng.wizard.domain.helpers.Executor.runSilentScript(Executor.java:65)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.plateng.wizard.domain.silent.tasks.RunScriptTask.runScriptWithExecutor(RunScriptTask.java:552)
at com.bea.plateng.wizard.domain.silent.tasks.RunScriptTask.execute(RunScriptTask.java:336)
at com.bea.plateng.wizard.silent.tasks.AbstractSilentTask.run(AbstractSilentTask.java:28)
at java.lang.Thread.run(Thread.java:619)
2014-09-04 05:08:50,129 WARN [runScript] com.bea.plateng.domain.aspect.XBeanConfigAspect - Unable to locate property:Target on type:class com.bea.plateng.domain.xml.configxb.impl.MachineTypeImpl
2014-09-04 05:08:50,145 WARN [runScript] com.bea.plateng.domain.aspect.XBeanConfigAspect - Unable to locate property:Target on type:class com.bea.plateng.domain.xml.configxb.impl.ClusterTypeImpl
2014-09-04 05:08:50,145 WARN [runScript] com.bea.plateng.domain.aspect.XBeanConfigAspect - Unable to locate property:Target on type:class com.bea.plateng.domain.xml.configxb.impl.ServerTypeImpl
2014-09-04 05:08:50,145 WARN [runScript] com.bea.plateng.domain.aspect.XBeanConfigAspect - Unable to locate property:Target on type:class com.bea.plateng.domain.xml.configxb.impl.ServerTypeImpl
2014-09-04 05:08:50,223 INFO [runScript] com.bea.plateng.domain.script.ScriptExecutor - succeed: read domain from "C:\Oracle\Middleware\user_projects\domains\EDLINK"
2014-09-04 05:08:50,223 INFO [runScript] com.bea.plateng.domain.script.ScriptExecutor - set config option Managed to "true"
2014-09-04 05:08:50,285 INFO [runScript] com.bea.plateng.domain.script.ScriptExecutor - succeed: set config option Managed to "true"
2014-09-04 05:08:50,285 INFO [runScript] com.bea.plateng.domain.script.ScriptExecutor - write template to "C:\Oracle\EDLINK.jar"
2014-09-04 05:08:54,145 INFO [Thread-1] com.bea.plateng.domain.TemplateGenerator - Template Generation Successfull!
2014-09-04 05:08:54,176 INFO [runScript] com.bea.plateng.domain.script.ScriptExecutor - succeed: write template to "C:\Oracle\EDLINK.jar"
2014-09-04 05:08:54,176 INFO [runScript] com.bea.plateng.domain.script.ScriptExecutor - close template
2014-09-04 05:08:54,192 INFO [runScript] com.bea.plateng.domain.script.ScriptExecutor - succeed: close template
FYI: I am using webLogic Portal 10.3.2 generic
with MS SQL Server 2008 R2 64-bit
on MS windows 2008 R2 server
solution to this post would be really appreciable.
Thanks
Punit

Are you trying to upgrade your portal domain from 10.3.2 to 10.3.6 ?
If yes then you need to use the Weblogic upgrade wizard.
Perform the following steps to upgrade your portal domain:
Verify that the WebLogic domain is not running.
Upgrade the portal domain using the WebLogic Upgrade Wizard before you upgrade your portal application. To start the WebLogic Upgrade Wizard in graphical mode and upgrade a WebLogic domain on a Windows platform, run upgrade.cmd from the<WLPORTAL_HOME>\common\bin directory
Note:Do not use the menu option Start > All Programs > Oracle Products > WebLogic Server 10.x > Tools > Domain Upgrade Wizard. This launches the WebLogic Server domain upgrade wizard.

Configuring weblogic server to start automatically

Hi, I have installed oracle weblogic server 11g, jdk/jre 7 and forms & reports 11g. i have successfully installed all softwares. I configured forms and reports domain and weblogic domain. I would like to have weblogic start automatically when i login in to comp/server. Right now i have to click on the start admin server for weblogic server domain button in domain folder and the stop admin server button. I also have to type in the username and password into the cmd promt when i click the start and stop admin server buttons.
How can i have the forms and reporst weblogic server start automatically?
how can i get past not having to enter in username and password each time it starts up and stops? (this is entering the username and password before you get to the weblogic console login screen)

i configured it as a windows service. i followed the instructions from the link you provided and when i finished i named the file "startweblogic.cmd." I put the file in the "WL_HOME\server\bin" directory which also has the installsvc.cmd file in and ran it as administrator.
tHIS IS A COPY OF WHAT WAS DISPLAYED:
C:\Windows\system32>echo off
C:\Windows\system32>set CLASSPATH=C:\Oracle\MIDDLE~1\patch_wls1036\profiles\defa
ult\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_ocp371\pr
ofiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\PROGRA~1\Java\JDK17~
1.0\lib\tools.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Or
acle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\feat
ures\weblogic.server.modules_10.3.6.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\l
ib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;C:\Orac
le\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;
* To start WebLogic Server, use the password *
* assigned to the system user. The system *
* username and password must also be used to *
* access the WebLogic Server console from a web *
* browser. *
C:\Windows\system32>rem *** Set Command Line for service to execute within creat
ed JVM
C:\Windows\system32>set CMDLINE="-client -Xms32m -Xmx200m -XX:MaxPermSize=128m -
XX:+UseSpinning -Dweblogic.management.server=http://hidden:hidden -Dweblo
gic.Stdout="D:\TEMP\Svr_Logs\stdout.log" -Dweblogic.Stderr="D:\TEMP\Svr_Logs\std
err.log" -Xverify:none -classpath \"C:\Oracle\MIDDLE~1\patch_wls1036\profiles\de
fault\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_ocp371\
profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\PROGRA~1\Java\JDK1
7~1.0\lib\tools.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\
Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\fe
atures\weblogic.server.modules_10.3.6.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server
\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;C:\Or
acle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;\" -Dweblogic.Name=hidden -Dweblogic.management.username=hidden -Dweblogic.management.server
=\"http://hidden:hidden\" -Dweblogic.ProductionModeEnabled= -Djava.securi
ty.policy=\"C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy\" weblogic.
Server"
C:\Windows\system32>goto finish
C:\Windows\system32>rem *** Set up extrapath for win32 and win64 platform separa
tely
C:\Windows\system32>if "false" == "true" set EXTRAPATH=C:\Oracle\MIDDLE~1\WLSERV
~1.3\server\native\win\32;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\PROGRA~1\J
ava\JDK17~1.0\jre\bin;C:\PROGRA~1\Java\JDK17~1.0\bin;C:\Oracle\MIDDLE~1\WLSERV~1
.3\server\native\win\32\oci920_8
C:\Windows\system32>if "false" == "true" set EXTRAPATH=C:\Oracle\MIDDLE~1\WLSERV
~1.3\server\native\win\64\;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\PROGRA~1\
Java\JDK17~1.0\jre\bin;C:\PROGRA~1\Java\JDK17~1.0\bin;C:\Oracle\MIDDLE~1\WLSERV~
1.3\server\native\win\64\oci920_8
C:\Windows\system32>if "true" == "true" set EXTRAPATH=C:\Oracle\MIDDLE~1\WLSERV~
1.3\server\native\win\x64\;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\PROGRA~1\
Java\JDK17~1.0\jre\bin;C:\PROGRA~1\Java\JDK17~1.0\bin;C:\Oracle\MIDDLE~1\WLSERV~
1.3\server\native\win\x64\oci920_8
C:\Windows\system32>rem *** Install the service
C:\Windows\system32>"C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin\beasvc" -install -
svcname:"beasvc Hidden_hidden" -javahome:"C:\PROGRA~1\Java\JDK17~1.
0" -execdir:"C:\Oracle\Middleware\user_projects\domains\hidden\config"
-maxconnectretries:"3" -host:"hidden" -port:"hidden" -extrapath:"C:\Oracle\M
IDDLE~1\WLSERV~1.3\server\native\win\x64\;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\b
in;C:\PROGRA~1\Java\JDK17~1.0\jre\bin;C:\PROGRA~1\Java\JDK17~1.0\bin;C:\Oracle\M
IDDLE~1\WLSERV~1.3\server\native\win\x64\oci920_8" -password:"hidden" -cmdl
ine:"-client -Xms32m -Xmx200m -XX:MaxPermSize=128m -XX:+UseSpinning -Dweblogic.m
anagement.server=http://HIDDEN:HIDDEN -Dweblogic.Stdout="D:\TEMP\Svr_Logs
\stdout.log" -Dweblogic.Stderr="D:\TEMP\Svr_Logs\stderr.log" -Xverify:none -clas
spath \"C:\Oracle\MIDDLE~1\patch_wls1036\profiles\default\sys_manifest_classpath
\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_ocp371\profiles\default\sys_manifes
t_classpath\weblogic_patch.jar;C:\PROGRA~1\Java\JDK17~1.0\lib\tools.jar;C:\Oracl
e\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\s
erver\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modul
es_10.3.6.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Orac
le\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA
~1.0_1/lib/ant-contrib.jar;\" -Dweblogic.Name=HIDDEN -Dweblogic.managem
ent.username=HIDDEN-Dweblogic.management.server=\"http://HIDDEN:HIDDEN\" -Dweblogic.ProductionModeEnabled= -Djava.security.policy=\"C:\Oracle\MIDDLE
~1\WLSERV~1.3\server\lib\weblogic.policy\" weblogic.Server"
CreateService failed - The specified service already exists. (0x431)
C:\Windows\system32>ENDLOCAL
C:\Windows\system32>pause
Press any key to continue . . .
Edited by: 975620 on Apr 3, 2013 11:31 AM
Edited by: 975620 on Apr 3, 2013 11:32 AM

Connect OEPE to a Weblogic Server running in Production SSL mode

I am trying to connect an ECLIPSE IDE to a production Weblogic Server domain. However when I add the AdminServer to the IDE I get the message that it is Stopped but Synchronized. Therefore I cannot deploy any code directly from the IDE. How do you get Eclipse to connect to a production domain running with SSL enabled?

According to the Oracle docs you can connect via ssl to a domain in development mode using the demo certificates. See
http://download.oracle.com/docs/cd/E11035_01/wls100/secmanage/identity_trust.html - Configuring Demo Certificates for Clients
I was wondering if it was possible using proper certificates and a production domain.

Unable to deploy on Server domain...

Hello,
I am totally new to the WebLogic Workshop 8.1 I have done all the tutorials of
BEA WebLogic.
I am stuck at this problem.
I have created a simple application, which uses Java Control, WebService and Page
Flows. I create the EAR file. When I try to deploy it on the Server Domain, it
gives the following error...
Creation of JMS queues failed, probably because your server is not Workshop enabled.
Would you like to view the help topic on how to enable an existing WebLogic Server
domain.
But the thing is that I have not created any JMS queues or have written any code/control
that needs one. The Java Control only has a WebService Control.
Why do I need a Workshop domain, can I not just deploy on Server domain?
If I still try to deploy on the Server Domain, it gives the following error...
<Jun 15, 2004 11:16:40 AM PDT> <Warning> <Deployer> <BEA-149004> <Failures were
detected while initiating Deploy task for application AddressChange.>
<Jun 15, 2004 11:16:40 AM PDT> <Error> <Deployer> <BEA-149201> <Failed to comple
te the deployment task with ID 0 for the application AddressChange.
weblogic.management.ApplicationException:
Exception:weblogic.management.ApplicationException: prepare failed for AddressCh
angeWebService
Module: AddressChangeWebService Error: Could not load AddressChangeWebSe
rvice: weblogic.management.DeploymentException: [HTTP:101283]ServletContext(id=2
3736437,name=AddressChangeWebService,context-path=/AddressChangeWebService): jsp
Servlet "weblogic.servlet.WlwJSPServlet" defined in weblogic.xml could not be
lo
aded.
java.lang.ClassNotFoundException: weblogic.servlet.WlwJSPServlet
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClass
Loader.java:198)
at java.lang.ClassLoader.loadClass(ClassLoader.java:299)
at java.lang.ClassLoader.loadClass(ClassLoader.java:255)
at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
Loader.java:223)
at weblogic.servlet.jsp.JspConfig.isJspServletValid(JspConfig.java:317)
at weblogic.servlet.internal.WebAppServletContext.registerJspServlet(Web
AppServletContext.java:2531)
at weblogic.servlet.internal.WebAppServletContext.prepareFromDescriptors
(WebAppServletContext.java:1885)
at weblogic.servlet.internal.WebAppServletContext.init(WebAppServletCont
ext.java:565)
I would appreciate any help on this.
Regards,
VB.

Hello,
I am totally new to the WebLogic Workshop 8.1 I have done all the tutorials of
BEA WebLogic.
I am stuck at this problem.
I have created a simple application, which uses Java Control, WebService and Page
Flows. I create the EAR file. When I try to deploy it on the Server Domain, it
gives the following error...
Creation of JMS queues failed, probably because your server is not Workshop enabled.
Would you like to view the help topic on how to enable an existing WebLogic Server
domain.
But the thing is that I have not created any JMS queues or have written any code/control
that needs one. The Java Control only has a WebService Control.
Why do I need a Workshop domain, can I not just deploy on Server domain?
If I still try to deploy on the Server Domain, it gives the following error...
<Jun 15, 2004 11:16:40 AM PDT> <Warning> <Deployer> <BEA-149004> <Failures were
detected while initiating Deploy task for application AddressChange.>
<Jun 15, 2004 11:16:40 AM PDT> <Error> <Deployer> <BEA-149201> <Failed to comple
te the deployment task with ID 0 for the application AddressChange.
weblogic.management.ApplicationException:
Exception:weblogic.management.ApplicationException: prepare failed for AddressCh
angeWebService
Module: AddressChangeWebService Error: Could not load AddressChangeWebSe
rvice: weblogic.management.DeploymentException: [HTTP:101283]ServletContext(id=2
3736437,name=AddressChangeWebService,context-path=/AddressChangeWebService): jsp
Servlet "weblogic.servlet.WlwJSPServlet" defined in weblogic.xml could not be
lo
aded.
java.lang.ClassNotFoundException: weblogic.servlet.WlwJSPServlet
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClass
Loader.java:198)
at java.lang.ClassLoader.loadClass(ClassLoader.java:299)
at java.lang.ClassLoader.loadClass(ClassLoader.java:255)
at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
Loader.java:223)
at weblogic.servlet.jsp.JspConfig.isJspServletValid(JspConfig.java:317)
at weblogic.servlet.internal.WebAppServletContext.registerJspServlet(Web
AppServletContext.java:2531)
at weblogic.servlet.internal.WebAppServletContext.prepareFromDescriptors
(WebAppServletContext.java:1885)
at weblogic.servlet.internal.WebAppServletContext.init(WebAppServletCont
ext.java:565)
I would appreciate any help on this.
Regards,
VB.

WebLogic Server 10.3.5 shows 10.3.4 components

Hi,
This may be a silly question, but I will ask it anyway. Why is it that when I run config.sh to create a WebLogic Server domain, it lists 10.3.4 components when I get to the Select Domain Source screen?
For example, Basic WebLogic Server Domain - 10.3.4.0 [wlserver_10.3]*.
I know I am running 10.3.5 because I get this from my nohup....
<Oct 14, 2011 1:05:23 PM EDT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011>
Thanks,

Thanks, I found that page, but I do not have access to the admin console (since the IP changed and all WLS-related items are down).
I was able fix this by replacing all references to the IP with the hostname on the server. I recreated the nodemanager service and then rebooted the server. Everything fired up after that.
-b

EAR/WAR File Deployment Query on WEBLOGIC SERVER

Hi,
We are running weblogic server version 10.3.4.0 where EAR/ WAR files deployed on single server and that has been configured in the current WebLogic Server domain. These applications are up and running fine. We need to deploy a new WAR file on the same domain. My questions are:
@ Whether I can deploy new WAR file without STARTing and STOPing weblogic server instance?
@ When deploying new WAR file, whether it will affect existing deployed files or will it affect any other running services for a fraction of second?
Note: This new WAR file is independent application and will not affect any other services in the future.
Please assist.
Thanks,
Dheeraj

Thank you for your help but the result is still the same.
I deployed the library on weblogic server suggested by you.
File Deployed as library = oracle.adf.desktopintegration.model.ear
From the folder = C:\Oracle\Middleware\oracle_common\modules\oracle.adf.desktopintegration.model_11.1.1
It is active.
After this I loaded jdeveloper and deploy the same sample application and found that the result is same.
Pls let me know where I am going wrong.
Regards,
Masood
[11:53:09 AM] ---- Deployment started. ----
[11:53:09 AM] Target platform is (Weblogic 10.3).
[11:53:09 AM] Retrieving existing application information
[11:53:09 AM] Running dependency analysis...
[11:53:09 AM] Building...
[11:53:09 AM] Deploying 2 profiles...
[11:53:09 AM] Wrote Web Application Module to C:\JDeveloper\mywork\10MinDemo\ViewController\deploy\10MinDemo_ViewController_webapp.war
[11:53:10 AM] Wrote Enterprise Application Module to C:\JDeveloper\mywork\10MinDemo\deploy\10MinDemo_Project1_10MinDemo.ear
[11:53:10 AM] Deploying Application...
[11:53:10 AM] [Deployer:149191]Operation 'deploy' on application '10MinDemo_Project1_10MinDemo' is initializing on 'ADFServer'
[11:53:11 AM] [Deployer:149193]Operation 'deploy' on application '10MinDemo_Project1_10MinDemo' has failed on 'ADFServer'
[11:53:11 AM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application 10MinDemo_Project1_10MinDemo on ADFServer.: .
[11:53:11 AM] Weblogic Server Exception: weblogic.management.DeploymentException:
[11:53:11 AM] Caused by: java.lang.ClassNotFoundException: oracle.adf.share.weblogic.listeners.ADFApplicationLifecycleListener
[11:53:11 AM] See server logs or server console for more details.
[11:53:11 AM] weblogic.management.DeploymentException:
[11:53:11 AM] Deployment cancelled.
[11:53:11 AM] ---- Deployment incomplete ----.
[11:53:11 AM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)

Silent Script to create Basic Weblogic Portal Domain

Has any one made a Basic Weblogic Portal Domain??
I am trying to use the template wlp.jar but i get an error
when i am writing the domain.
<< write Domain to "U:\test\weblogic\wlpDomain"
fail: write Domain to "U:\test\weblogic\wlpDomain"If i use the wls.jar to create a Basic Weblogic Server Domain
it works fine.
Does any one have a sample that works which i can use??
Many Thanks
Murat

Has any one made a Basic Weblogic Portal Domain??
I am trying to use the template wlp.jar but i get an error
when i am writing the domain.
<< write Domain to "U:\test\weblogic\wlpDomain"
fail: write Domain to "U:\test\weblogic\wlpDomain"If i use the wls.jar to create a Basic Weblogic Server Domain
it works fine.
Does any one have a sample that works which i can use??
Many Thanks
Murat

Weblogic Server Domain Metrics

Similar Messages

Maybe you are looking for