Weblogic Server Installation in Master/Slave

Hi All,
I have two linux server dedicated for weblogic server and I want to configure weblogic server on both the machines with one of them becomes a server and other machine will be a slave.
I have searched a lot but couldn't find any adequate information. Could someone please shed some light on how to install/configure weblogic server in master/slave fashion/pattern?
I appreciate for any help.
Thanks,
Sanjay

I think you need to do some reading of how domain's are organized with 1 Admin Server and 0 to many Managed Servers. The Managed Servers can be grouped into Clusters if you want. The servers can be across multiple machines. Check out the following link and perhaps the detail under clustering and respond if you have a more precise question.
http://edocs.beasys.com/wls/docs103/domain_config/understand_domains.html#wp1101973

Similar Messages

Start multiple domains simultaneously on 1 Weblogic server installation?

Is it okay to start and run multiple domains simultaneously. Better yet, when having multiple domains on 1 WLS server, should each domain have a different port number in order to be run simultaneously?
Here's my scenario - I installed Oracle Business Intellgence, which by default installs and configures WLS server for certain Business Intelligence applications (BI Publisher). This instance was running fine and good and still is.
Then I had another application, Oracle Data Integrator, which has a Console piece that requires a domain on WLS. So instead of modifying the existing domain for Oracle Business Intelligence, I created a new domain via the Configuration Wizard and selected those components for Oracle Data Integrator.
therefore current domains:
...\domains\bifoundation_domain --> installed automatically as part of Oracle Business Intelligence
...\domains\odi11g --> I created this domain after I
Now I have 2 domains under 1 WLS Server (windows 7 64bit), but if I startWeblogic.cmd for the bifoundation_domain, and I startWeblogic.cmd for the odi11g...then only the components for the bifoundation_domain become available via the WLS Console.
Questions:
- Can I run both domains simultaneously?
- Should I have modified the bifoundation_domain to include Oracle Data Integrator component; therefore only having 1 domain but having everything run under that domain?
- Does the Port for each domain matter? both bifounddation_domain and odi11g domain use ports 7001
Are there any other considerations? Thanks much.

Hi,
It is perfectly OK to run multiple domains on a single Weblogic server installation. Only constraint would be you have enough capacity available on your server to start multiple instances.
Things to note is, if your domain1 is running on listen address : port { localhost : 7001 } then your other domain should be configured on a different port say {localhost : 8001 }. If you want both domain to run on same port then go for virtual IP's to be plumbed on your physical network interface and configure as,
domain1 - { ip1 : 7001 }
domain2 - { ip2 : 7001 }
this way you will can access both domain admin console on same port.
Remember, Weblogic resources cannot be shared between domain, however a single nodemanager will be enough to monitor both the domains.
* rank it if answer is helpful :) *
Thanks,
Ranjan

Which Weblogic server installation do I need??

I need to download and install Oracle 11g Portal, Forms, Reports and Discoverer (11.1.1.2.0) for Windows 7 Professional. On its main page, Oracle says that I have to download and install Weblogic Server before I can install Forms 11g. When I go to Weblogic Server download page, I see two versions: The package installer (815 MB), and the net installer (40 MB). Which one of them do I need for my purpose? Also, do I need something else (other than the database ofcourse and the Weblogic Server) to download and install before putting Forms 11g?
Thanks

When I go to Weblogic Server download page, I see two versions: The package installer (815 MB), and the net installer (40 MB)?
Both Installer will do the same thing....You can choose any one of them
*"Package Installer":* It's Size will be always much more than the Net-Installer....If you want to Once download the Installer in your PC and then want to run it in separate Boxes again & Again where u may not have Internet connectivity ...then you need to choose "Package Installer". When you run the Package installer, you can also select the specific product components you want to install, thereby also enabling you to minimize the installation footprint.
Downloading the Package installer is recommended if you want to perform multiple WebLogic Server installations at your site. In a typical scenario, you download the Package installer only once, then make it available to each machine on which you wish to have the product installed. (You can run the installer from each machine directly over the local network, or copy the installer onto each machine and run it.)
*"Net Installer":* If you want to install the WebLogic and donot want the Installer keeo with you for future use...This is good. It has 40 MB size ...because this 40MB installer will start Downloading rest of the part of the complete installer from the Oracle N/W on the fly. Unlike the Net installer, the Package installer does not provide for any reduction in download time or the amount of disk space required for the installation files.
Thanks
Jay SenSharma
http://jaysensharma.wordpress.com (WebLogic Wonders Are Here)

WebLogic Server installation Crashing with a fatal error - SIGSEGV

Hello WLS Gurus,
I am in the process of installing Discoverer 11 and I am facing problems with launching wls1036_generic.jar installer.
I have installed installed Java 7 as follows:
cd /u02/appldisc/11.1.1/Middleware
tar -xvzf jdk-7u25-linux-x64.tar.gz
JAVA_HOME=/u02/appldisc/11.1.1/Middleware/jdk1.7.0_25
I then excuted:
$JAVA_HOME/bin/java -Xmx1024m -jar wls1036_generic.jar
and the installer crashed with this error output:
# A fatal error has been detected by the Java Runtime Environment:
# SIGSEGV (0xb) at pc=0x0000003b09e14d70, pid=28328, tid=139864618293008
# JRE version: 7.0_25-b15
# Java VM: Java HotSpot(TM) 64-Bit Server VM (23.25-b01 mixed mode linux-amd64 compressed oops)
# Problematic frame:
# C [ld-linux-x86-64.so.2+0x14d70]
# Failed to write core dump. Core dumps have been disabled. To enable core dumping, try "ulimit -c unlimited" before starting Java again
# If you would like to submit a bug report, please visit:
# http://bugreport.sun.com/bugreport/crash.jsp
# The crash happened outside the Java Virtual Machine in native code.
# See problematic frame for where to report the bug.
--------------- T H R E A D ---------------
Current thread (0x00007f34d03b9000): JavaThread "AWT-EventQueue-0" [_thread_in_native, id=28346, stack(0x00007f34c4d3d000,0x00007f34c4e3e000)]
siginfo:si_signo=SIGSEGV: si_errno=0, si_code=128 (), si_addr=0x0000000000000000
Registers:
RAX=0x0000000000000001, RBX=0x00007f34d02bea50, RCX=0x000000009e982203, RDX=0x000000001fabfbff
RSP=0x00007f34c4e39ab8, RBP=0x00007f34c4e39c00, RSI=0x0000000000000000, RDI=0x0000000000000058
Can someone help?
Thanks
Mathias

See
“Generic WebLogic Server Installer generates a Crash immediately after opening GUI on ld-linux-x86-64.so.2 Library (Doc ID 1570688.1)” which states that
“ This is an issue with AVX support appearing on newer hardware. Default glibc is incompatible with it. This problem happens due to a Red Hat Bug: Segmentation fault in dynamic loader on AVX enabled CPU “
Solution:
1. Set the following Environment Property on your active Shell.
- open a bash terminal and type in:
$ export LD_BIND_NOW=1
2. Re-Run the installer as bellow example.
$JAVA_HOME/bin ./java -jar wls1036_generic.jar
Mathias

64bit weblogic server installation on windows

Hi,
We are trying to install 64bit Oracle weblogic Server 10.3.2 on windows 2007 Server. As per the documentation, The installation requires 64bit java installation and then execute the wl_1032_server.jar file.
We installed weblogic Server successfully and did not find any errors while installing the weblogic server. We created one Managed Server with the default options. We are able to start the Admin Server with out any problems.
But we are unable to start the managed weblogic server and we are getting the following error message while starting the managed webserver.
I have also tried with setting the following memory args also. But I am getting the same error in the managedserver log files.
set MEM_ARGS=-Xms512m -Mmx1024m -MaxPermSize=512m
<Feb 19, 2010 11:57:01 PM EST> <Notice> <WebLogicServer> <BEA-000330> <Started WebLogic Managed Server "new_ManagedServer_1" for domain "base_domain" running in Production Mode>
Exception in thread "[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
The WebLogic Server encountered a critical failure
Reason: PermGen space
Exception in thread "main" java.lang.OutOfMemoryError: PermGen space
<Feb 19, 2010 11:57:10 PM> <FINEST> <NodeManager> <Waiting for the process to die: 1848>
Can you please help us in configuring the 64bit weblogic server. Do we need to make any special configurations.
Thanks and Regards,
S R Prasad

Thanks,
You are right and I've found a documentation below. Did you checked your Environment Variables or try to use full path of 64 bit Java installation?
How do I select between 32 and 64-bit operation? What's the default? The options -d32 and -d64 have been added to the Java launcher to specify whether the program is to be run in a 32 or 64-bit environment. On Solaris these correspond to the ILP32 and LP64 data models, respectively. Since Solaris has both a 32 and 64-bit J2SE implementation contained within the same installation of Java, you can specify either version. If neither -d32 nor -d64 is specified, the default is to run in a 32-bit environment.
Other Java commands (javac, javadoc, etc.) will rarely need to be executed in a 64-bit environment. However, the -d32/-d64 options may be passed to these commands and then on to the Java launcher using the established -J prefix option (eg: -J-d64).
All other platforms (Windows and Linux) contain separate 32 and 64-bit installation packages. If both packages are installed on a system, you select one or the other by adding the appropriate "bin" directory to your path. For consistency, the Java implementations on Linux accept the -d64 option.
Regards,
Kadir

Weblogic server installation in red hat linux 5

hi i am new to the weblogic server i am trying to install weblogic server in redhat linux i downloaded .bin file from oracle
i enter these commands
chmod +x wls1035_oepe111172_linux32.bin
./wls1035_oepe111172_linux32.bin
The directory "/tmp" does not have enough space for extraction.
Please input another directory or [Exit]: Exit
i got the error message
please reply i will appreciate your hep

Steps for preparing the installation can be found here: http://download.oracle.com/docs/cd/E17904_01/doc.1111/e14142/prepare.htm#i1183981
To run the installation steps presented here can be followed: http://download.oracle.com/docs/cd/E17904_01/doc.1111/e14142/guimode.htm#i1082009

Weblogic server installation error

Hi,
I has installed weblogic server 10.3.2 in C:\Oracle\Middleware, then i uninstalled weblogic server. Now i want to install again, but i got this error: http://imageshack.us/photo/my-images/812/asdasdmi.jpg/
Please help me and give me some ideas of what to do, i'm so confused.
Thanks
Edited by: Roger22 on 29.06.2011 19:37

Hi,
If no other weblogic serverss installed on that machine, then you could delete the registry key corresponding to the old installation.
It seems you are using windows.
click start button-->Run-->type 'regedit' without quotes and then search for the key weblogic and delete that key.
*Please make sure you will have a backup of registry keys.
presee CTRL + F and type weblogic and click next and find a key smiliar to this below.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\BEA Products
select the BEA Products folder lefthandside and delete that.
remove BEA products shortcut from start menu and reboot your machine once and then try installing weblogic server.
Thanks
Weblogic Admin

Weblogic server installation - multiple instances in different ports

Hi
I want to install weblogic server(10.0) in my system but it should have three instances running on different ports(equivalent to 3 servers running on the same host). The application hosted on one server will be interacting with the applications hosted on the other two servers.
Could anybody tell me how to install weblogic server in this way?
Thanks
Praveena

Hi Jakarta,
As you have mentioned: You want to have three instances running on different ports.
In that case you can create 3 managed Servers after Creating the WebLogic Domain.
Step1). Create a Fresh WebLogic Domain.
Step2). Login to Admin Console (http://localhost:7001/console) and then Create 3 manager Servers and then assign different Ports to them.
MS1------7003
MS2------7005
MS3------7007
Step3). Start These Servers using <DOMAIN_HOME>/bin/startManagedWebLogic.cmd/sh like:
startManagedWebLogic.cmd MS1 t3://localhost:7001
startManagedWebLogic.cmd MS2 t3://localhost:7001
startManagedWebLogic.cmd MS3 t3://localhost:7001
Here "localhost:7001" is the Admin Server URL.
<BR>
<font color=maroon>
About The application hosted on one server will be interacting with the applications hosted on the other two servers.</font>
Here which kind of interaction you are talking about...HTTP interaction, RMI Interaction...With above setup it is possible...
Do you want any kind of WebLogic Clustering?
Thanks
Jay SenSharma
http://jaysensharma.wordpress.com (WebLogic Wonders Are Here)

Oracle Weblogic Server Installation using the user "oracle"

Hi,
I installed two instances of weblogic server for FMW 11g on linux x86-64. One was with the user oracle and other was with the user orawls, both belonging to the group oinstall. I had installed Admin Server and created managed servers soa_server1 and bam_server1. I have issues in starting up the instance with oracle user and the instance with the orawls user starts fine. I have a separate thread going on for that issue.
I just wanted to know if there were any existing known issues when installing the WLS as oracle user ?
Cheers,
- AR

I have no issues with the oracle user. I do it all the time.
Which thread are you referring to?
--olaf

Weblogic Server Installation User

Hi,
I need to know the Group to which the user (installing and holding Weblogic on OEL 5) should belong to.
Say if I create an Unix user "wb_user" which will install and hold the Weblogic, then what groups should I assign to this user- dba,oinstall ?
Regards,
Amrita

There is no such requirement in the product that the "wb_user" user should belong to the "dba" group OR "oinstall" group.
It is upto the best practices in your organization.
May be you can assign "oinstall" group to the "wb_user" OR create a separate group like "wb_group" for "wb_user"
Arun

WebLogic server installation error:java.lang.NoSuchFieldError:CN

Hi to all,
I have execute a new installation using the command: java -d64 wls_121200.jar, but at the end of installation I receive the error message:
2013-09-26 17:09:19,162 SEVERE [Thread-7] com.oracle.cie.domain.DomainGenerator - Creazione del dominio non riuscita.
Posizione dominio: C:\Oracle\Middleware\Oracle_Home\user_projects\domains\base_domain
Motivo: java.lang.NoSuchFieldError: CN
Thanks in advance for any help.

Hi,
Do not use -d64 option here
Use following option in windows.
java -jar wls_121200.jar that will take 64bit if your OS is 64bit.
Regards,
Kal

WebLogic as Web Server Installation using WebLogic Express

Hi all,
I am in a process of installing WebLogic Web server. I downloaded WebLogic Express from bea site, and it turns out to be the same bin file that I had used for WebLogic Server installation. During the installation, I did not come across an specific steps meant for WebLogic Express (which is a web server + servlet/jsp container)
Can some one please guide me at the earlier as regards installation steps for WebLogic Web Server,
Regards,

Jim,
I am trying to set up WLS 9.1 and got this error.
Could you help me with this? Why I am getting it?
Thanks!
Marvin
####<Jan 16, 2008 10:54:13 PM EST> <Error> <HTTP> <netwave8888> <MedRecServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1200542053359> <BEA-101359> <The servlet weblogic.servlet.AsyncInitServlet init method failed while it was run in the background. The exception was: java.lang.ExceptionInInitializerError.
java.lang.ExceptionInInitializerError
     at java.lang.Class.forName(Ljava.lang.String;ZLjava.lang.ClassLoader;)Ljava.lang.Class;(Unknown Source)
     at weblogic.servlet.AsyncInitServlet.createDelegate(AsyncInitServlet.java:43)
     at weblogic.servlet.AsyncInitServlet.initDelegate(AsyncInitServlet.java:92)
     at weblogic.servlet.internal.WebAppServletContext$AsyncInitRequest.run(WebAppServletContext.java:1641)
     at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:179)
org.apache.commons.logging.LogConfigurationException: java.lang.reflect.InvocationTargetException
     at org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactoryImpl.java:532)
     at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:272)
     at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:246)
     at org.apache.commons.logging.LogFactory.getLog(LogFactory.java:395)
     at org.apache.struts.action.ActionServlet.<clinit>(ActionServlet.java:375)
     at java.lang.Class.forName(Ljava.lang.String;ZLjava.lang.ClassLoader;)Ljava.lang.Class;(Unknown Source)
     at weblogic.servlet.AsyncInitServlet.createDelegate(AsyncInitServlet.java:43)
     at weblogic.servlet.AsyncInitServlet.initDelegate(AsyncInitServlet.java:92)
     at weblogic.servlet.internal.WebAppServletContext$AsyncInitRequest.run(WebAppServletContext.java:1641)
     at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:179)
java.lang.reflect.InvocationTargetException
     at jrockit.reflect.NativeConstructorInvoker.newInstance([Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
     at java.lang.reflect.Constructor.newInstance([Ljava.lang.Object;I)Ljava.lang.Object;(Unknown Source)
     at org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactoryImpl.java:525)
     at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:272)
     at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:246)
     at org.apache.commons.logging.LogFactory.getLog(LogFactory.java:395)
     at org.apache.struts.action.ActionServlet.<clinit>(ActionServlet.java:375)
     at java.lang.Class.forName(Ljava.lang.String;ZLjava.lang.ClassLoader;)Ljava.lang.Class;(Unknown Source)
     at weblogic.servlet.AsyncInitServlet.createDelegate(AsyncInitServlet.java:43)
     at weblogic.servlet.AsyncInitServlet.initDelegate(AsyncInitServlet.java:92)
     at weblogic.servlet.internal.WebAppServletContext$AsyncInitRequest.run(WebAppServletContext.java:1641)
     at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:179)
java.lang.NoClassDefFoundError: org/apache/log4j/LogManager
     at org.apache.log4j.Category.getInstance(Category.java:514)
     at org.apache.commons.logging.impl.Log4JCategoryLog.<init>(Log4JCategoryLog.java:104)
     at jrockit.reflect.NativeConstructorInvoker.newInstance([Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
     at java.lang.reflect.Constructor.newInstance([Ljava.lang.Object;I)Ljava.lang.Object;(Unknown Source)
     at org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactoryImpl.java:525)
     at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:272)
     at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:246)
     at org.apache.commons.logging.LogFactory.getLog(LogFactory.java:395)
     at org.apache.struts.action.ActionServlet.<clinit>(ActionServlet.java:375)
     at java.lang.Class.forName(Ljava.lang.String;ZLjava.lang.ClassLoader;)Ljava.lang.Class;(Unknown Source)
     at weblogic.servlet.AsyncInitServlet.createDelegate(AsyncInitServlet.java:43)
     at weblogic.servlet.AsyncInitServlet.initDelegate(AsyncInitServlet.java:92)
     at weblogic.servlet.internal.WebAppServletContext$AsyncInitRequest.run(WebAppServletContext.java:1641)
     at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:179)
>
####<Jan 16, 2008 10:54:13 PM EST> <Info> <Management> <netwave8888> <MedRecServer> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1200542053609> <BEA-141052> <The auto deployment poller has started.>

Weblogic Server 10.3.3.0 fatal error

Hi,
I am installing weblogic server 10.3.3.0 on IBM AIX 6.1. After i except the default location (/u01/app/oracle/middleware/wlserver_10.3) for Weblogic Server and Oracle Coherence (/u01/app/oracle/middleware/wlserver_10.3) i get this error msg.
*"A fatal error has occurred. This application will terminate."*
It's a generic error msg and Metalink doesn't have any notes regarding this. Has anyone seen this issue before?
Any help would be appreciated.
Thanks.
Shawn

I get the same error msg when i try to install 10.3.2.0. I know that is clearly mentioned in the note for upgrading OEM GC 10g to 11g but i thought this version might have some bugs so i tried to install the most latest one.
Unfortunately they don't have many notes on Weblogic Server installation and issues.

Can not find proper weblogic server install url.

I want to learn oracle form. So I was download oracle 11g fusion middleware. Before install it I have to install oracle web logic server. I was download weblogic server [ http://download.oracle.com/auth/otn/nt/middleware/11g/wls/wls1034_dev.zip] but it can not work. It has no .exe file to install. So help me to know from where can I download oracle weblogic server.

neelgpatel wrote:
I want to learn oracle form. So I was download oracle 11g fusion middleware. Before install it I have to install oracle web logic server. I was download weblogic server [ http://download.oracle.com/auth/otn/nt/middleware/11g/wls/wls1034_dev.zip] but it can not work. It has no .exe file to install. So help me to know from where can I download oracle weblogic server.
The WebLogic Server installation you have referred to in this link is the "developer" distribution which is a simple zip file distribution that has no installer. Putting "FMW" on top of this is not supported. This is documented in the readme on the download site: http://download.oracle.com/otn/nt/middleware/11g/wls/README.txt
If you want to learn Oracle Forms, then you need to use a full installer of WebLogic Server.
Try this page here: http://www.oracle.com/technetwork/middleware/weblogic/downloads/wls-main-097127.html and select the "Oracle WebLogic Server 11gR1 (10.3.4) + Coherence - Package Installer" for your specific platform:
http://download.oracle.com/otn/nt/middleware/11g/wls/wls1034_win32.exe
http://download.oracle.com/otn/linux/middleware/11g/wls/wls1034_linux32.bin
http://download.oracle.com/otn/solaris/middleware/11g/wls/wls1034_solaris32.bin
or the generic installer if you are not on one of those platforms:
http://download.oracle.com/otn/nt/middleware/11g/wls/wls1034_generic.jar
** I don't know if WLS 10.3.4 is the correct version to go with the Forms/Reports installer, please check those details for yourself. But the process will be the same if WLS 10.3.3 is required per the certification.
-steve-

Starting WebLogic Server from a common mount area!

Hi All,
we have a requirement wherein the weblogic server is installed in machineC in which the admin server is running.
The weblogic server installation is mounted on a common disk which can be accessed from machineA and machineB.
Is it possible to start the weblogic server from machineA and machineB?
Any comments/feedback will be REALLY appreciated!
Many Thanks in Advance,
C R Baradwaj

Hi
while iam running weblogic7 in eclipse iam getting this problem frequently
Certificate expired or not yet valid: fingerprint = 56b7dfac29e39c21027973c248d8c1bb, not before = Tue May 30 16:38:01 CDT 2000, not after = Thu May 13 16:38:01 CDT 2004, holder = C=US SP=California L=San Francisco O=BEA WebLogic CN=weblogic.bea.com [email protected] , issuer = C=US SP=California L=San Francisco O=BEA WebLogic OU=Security CN=Demo Certificate Authority [email protected] , key = modulus length=65 exponent length=3
<Feb 23, 2006 1:58:28 PM CST> <Alert> <WebLogicServer> <000297> <Inconsistent security configuration, java.lang.Exception: Certificate expired or not yet valid: fingerprint = 56b7dfac29e39c21027973c248d8c1bb, not before = Tue May 30 16:38:01 CDT 2000, not after = Thu May 13 16:38:01 CDT 2004, holder = C=US SP=California L=San Francisco O=BEA WebLogic CN=weblogic.bea.com [email protected] , issuer = C=US SP=California L=San Francisco O=BEA WebLogic OU=Security CN=Demo Certificate Authority [email protected] , key = modulus length=65 exponent length=3>
<Feb 23, 2006 1:58:28 PM CST> <Emergency> <Security> <090034> <Not listening for SSL, java.io.IOException: Inconsistent security configuration, Certificate expired or not yet valid: fingerprint = 56b7dfac29e39c21027973c248d8c1bb, not before = Tue May 30 16:38:01 CDT 2000, not after = Thu May 13 16:38:01 CDT 2004, holder = C=US SP=California L=San Francisco O=BEA WebLogic CN=weblogic.bea.com [email protected] , issuer = C=US SP=California L=San Francisco O=BEA WebLogic OU=Security CN=Demo Certificate Authority [email protected] , key = modulus length=65 exponent length=3.>
     at weblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java:220)
     at weblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java:122)
     at weblogic.t3.srvr.T3Srvr.initializeListenThreads(T3Srvr.java:1513)
     at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:852)
     at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:295)
     at weblogic.Server.main(Server.java:32)
<Feb 23, 2006 1:58:28 PM CST> <Error> <socket> <000433> <Unable to load performance pack, using Java I/O instead.
Please ensure that libmuxer library is in :'C:\Program Files\Java\j2sdk1.4.2_10\bin;C:\bea\weblogic700\bin;C:\bea\weblogic700\server\bin'
java.lang.UnsatisfiedLinkError: no muxer in java.library.path
java.lang.UnsatisfiedLinkError: no muxer in java.library.path
     at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1517)
     at java.lang.Runtime.loadLibrary0(Runtime.java:788)
     at java.lang.System.loadLibrary(System.java:834)
     at weblogic.socket.PosixSocketMuxer.<init>(PosixSocketMuxer.java:179)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
     at java.lang.Class.newInstance0(Class.java:308)
     at java.lang.Class.newInstance(Class.java:261)
     at weblogic.socket.SocketMuxer.makeTheMuxer(SocketMuxer.java:54)
     at weblogic.socket.SocketMuxer.getMuxer(SocketMuxer.java:37)
     at weblogic.t3.srvr.ListenThread.run(ListenThread.java:199)
>

Weblogic Server Installation in Master/Slave

Similar Messages

Maybe you are looking for